hwmon: (pmbus/adm1275) Add support for second current limit
authorGuenter Roeck <guenter.roeck@ericsson.com>
Tue, 2 Aug 2011 18:08:57 +0000 (11:08 -0700)
committerGuenter Roeck <guenter.roeck@ericsson.com>
Mon, 24 Oct 2011 18:09:34 +0000 (11:09 -0700)
ADM1275 supports a second current limit, which can be configured as either lower
or upper limit. Add support for it and report it as either lower or upper
critical current limit.

Also replace error return code EINVAL for unsupported pages with ENXIO as this
is more appropriate for the observed condition.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Documentation/hwmon/adm1275
drivers/hwmon/pmbus/adm1275.c

index 097b3ccc4be767fd02a8c205e09812ed8982c5d5..c438c98bdbc8327a78f860693a972ee2f2183f88 100644 (file)
@@ -60,5 +60,13 @@ curr1_label          "iout1"
 curr1_input            Measured current. From READ_IOUT register.
 curr1_max              Maximum current. From IOUT_OC_WARN_LIMIT register.
 curr1_max_alarm                Current high alarm. From IOUT_OC_WARN_LIMIT register.
+curr1_lcrit            Critical minimum current. Depending on the chip
+                       configuration, either curr1_lcrit or curr1_crit is
+                       supported, but not both.
+curr1_lcrit_alarm      Critical current low alarm.
+curr1_crit             Critical maximum current. Depending on the chip
+                       configuration, either curr1_lcrit or curr1_crit is
+                       supported, but not both.
+curr1_crit_alarm       Critical current high alarm.
 curr1_highest          Historical maximum current.
 curr1_reset_history    Write any value to reset history.
index 424d0d711ccb5de35eae17d5043e84704f8ccb33..7a9f2d9dbba451efcb9df4ce511ba89f738805cc 100644 (file)
 #define ADM1275_VIN_VOUT_SELECT                (1 << 6)
 #define ADM1275_VRANGE                 (1 << 5)
 
+#define ADM1275_IOUT_WARN2_LIMIT       0xd7
+#define ADM1275_DEVICE_CONFIG          0xd8
+
+#define ADM1275_IOUT_WARN2_SELECT      (1 << 4)
+
+#define ADM1275_MFR_STATUS_IOUT_WARN2  (1 << 0)
+
+struct adm1275_data {
+       bool have_oc_fault;
+       struct pmbus_driver_info info;
+};
+
+#define to_adm1275_data(x)  container_of(x, struct adm1275_data, info)
+
 static int adm1275_read_word_data(struct i2c_client *client, int page, int reg)
 {
+       const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+       const struct adm1275_data *data = to_adm1275_data(info);
        int ret;
 
        if (page)
-               return -EINVAL;
+               return -ENXIO;
 
        switch (reg) {
+       case PMBUS_IOUT_UC_FAULT_LIMIT:
+               if (data->have_oc_fault) {
+                       ret = -ENXIO;
+                       break;
+               }
+               ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
+               break;
+       case PMBUS_IOUT_OC_FAULT_LIMIT:
+               if (!data->have_oc_fault) {
+                       ret = -ENXIO;
+                       break;
+               }
+               ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT);
+               break;
        case PMBUS_VIRT_READ_IOUT_MAX:
                ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT);
                break;
@@ -66,9 +96,14 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
        int ret;
 
        if (page)
-               return -EINVAL;
+               return -ENXIO;
 
        switch (reg) {
+       case PMBUS_IOUT_UC_FAULT_LIMIT:
+       case PMBUS_IOUT_OC_FAULT_LIMIT:
+               ret = pmbus_write_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT,
+                                           word);
+               break;
        case PMBUS_VIRT_RESET_IOUT_HISTORY:
                ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_IOUT, 0);
                break;
@@ -85,19 +120,52 @@ static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
        return ret;
 }
 
+static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+       const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+       const struct adm1275_data *data = to_adm1275_data(info);
+       int mfr_status, ret;
+
+       if (page)
+               return -ENXIO;
+
+       switch (reg) {
+       case PMBUS_STATUS_IOUT:
+               ret = pmbus_read_byte_data(client, page, PMBUS_STATUS_IOUT);
+               if (ret < 0)
+                       break;
+               mfr_status = pmbus_read_byte_data(client, page,
+                                                 PMBUS_STATUS_MFR_SPECIFIC);
+               if (mfr_status < 0) {
+                       ret = mfr_status;
+                       break;
+               }
+               if (mfr_status & ADM1275_MFR_STATUS_IOUT_WARN2) {
+                       ret |= data->have_oc_fault ?
+                         PB_IOUT_OC_FAULT : PB_IOUT_UC_FAULT;
+               }
+               break;
+       default:
+               ret = -ENODATA;
+               break;
+       }
+       return ret;
+}
+
 static int adm1275_probe(struct i2c_client *client,
                         const struct i2c_device_id *id)
 {
-       int config;
+       int config, device_config;
        int ret;
        struct pmbus_driver_info *info;
+       struct adm1275_data *data;
 
        if (!i2c_check_functionality(client->adapter,
                                     I2C_FUNC_SMBUS_READ_BYTE_DATA))
                return -ENODEV;
 
-       info = kzalloc(sizeof(struct pmbus_driver_info), GFP_KERNEL);
-       if (!info)
+       data = kzalloc(sizeof(struct adm1275_data), GFP_KERNEL);
+       if (!data)
                return -ENOMEM;
 
        config = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
@@ -106,6 +174,14 @@ static int adm1275_probe(struct i2c_client *client,
                goto err_mem;
        }
 
+       device_config = i2c_smbus_read_byte_data(client, ADM1275_DEVICE_CONFIG);
+       if (device_config < 0) {
+               ret = device_config;
+               goto err_mem;
+       }
+
+       info = &data->info;
+
        info->pages = 1;
        info->format[PSC_VOLTAGE_IN] = direct;
        info->format[PSC_VOLTAGE_OUT] = direct;
@@ -116,6 +192,7 @@ static int adm1275_probe(struct i2c_client *client,
        info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
 
        info->read_word_data = adm1275_read_word_data;
+       info->read_byte_data = adm1275_read_byte_data;
        info->write_word_data = adm1275_write_word_data;
 
        if (config & ADM1275_VRANGE) {
@@ -134,6 +211,9 @@ static int adm1275_probe(struct i2c_client *client,
                info->R[PSC_VOLTAGE_OUT] = -1;
        }
 
+       if (device_config & ADM1275_IOUT_WARN2_SELECT)
+               data->have_oc_fault = true;
+
        if (config & ADM1275_VIN_VOUT_SELECT)
                info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
        else
@@ -145,16 +225,17 @@ static int adm1275_probe(struct i2c_client *client,
        return 0;
 
 err_mem:
-       kfree(info);
+       kfree(data);
        return ret;
 }
 
 static int adm1275_remove(struct i2c_client *client)
 {
        const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+       const struct adm1275_data *data = to_adm1275_data(info);
 
        pmbus_do_remove(client);
-       kfree(info);
+       kfree(data);
        return 0;
 }