drm/i915/skl: Retrieve the Rpe value from Pcode
authorAkash Goel <akash.goel@intel.com>
Mon, 29 Jun 2015 09:20:19 +0000 (14:50 +0530)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Mon, 13 Jul 2015 08:37:03 +0000 (10:37 +0200)
Read the efficient frequency (aka RPe) value through the the mailbox
command (0x1A) from the pcode, as done on Haswell and Broadwell.
The turbo minimum frequency softlimit is not revised as per the
efficient frequency value.

v2: Replaced the conditional expression operator with 'if' statement (Tom)
v3: Corrected the derivation of efficient frequency & shifted the
    GEN9_FREQ_SCALER multiplications downwards (Ville)

Issue: VIZ-5143
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_pm.c

index 4e24d2b13e4c5eed56f81d84ebef5974a1dff8c1..ca82ad23e3f830ea10c2adc1950330032b3e3e93 100644 (file)
@@ -4703,18 +4703,11 @@ static void gen6_init_rps_frequencies(struct drm_device *dev)
                dev_priv->rps.min_freq = (rp_state_cap >> 16) & 0xff;
        }
 
-       if (IS_SKYLAKE(dev)) {
-               /* Store the frequency values in 16.66 MHZ units, which is
-                  the natural hardware unit for SKL */
-               dev_priv->rps.rp0_freq *= GEN9_FREQ_SCALER;
-               dev_priv->rps.rp1_freq *= GEN9_FREQ_SCALER;
-               dev_priv->rps.min_freq *= GEN9_FREQ_SCALER;
-       }
        /* hw_max = RP0 until we check for overclocking */
        dev_priv->rps.max_freq          = dev_priv->rps.rp0_freq;
 
        dev_priv->rps.efficient_freq = dev_priv->rps.rp1_freq;
-       if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
+       if (IS_HASWELL(dev) || IS_BROADWELL(dev) || IS_SKYLAKE(dev)) {
                ret = sandybridge_pcode_read(dev_priv,
                                        HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL,
                                        &ddcc_status);
@@ -4726,6 +4719,16 @@ static void gen6_init_rps_frequencies(struct drm_device *dev)
                                        dev_priv->rps.max_freq);
        }
 
+       if (IS_SKYLAKE(dev)) {
+               /* Store the frequency values in 16.66 MHZ units, which is
+                  the natural hardware unit for SKL */
+               dev_priv->rps.rp0_freq *= GEN9_FREQ_SCALER;
+               dev_priv->rps.rp1_freq *= GEN9_FREQ_SCALER;
+               dev_priv->rps.min_freq *= GEN9_FREQ_SCALER;
+               dev_priv->rps.max_freq *= GEN9_FREQ_SCALER;
+               dev_priv->rps.efficient_freq *= GEN9_FREQ_SCALER;
+       }
+
        dev_priv->rps.idle_freq = dev_priv->rps.min_freq;
 
        /* Preserve min/max settings in case of re-init */