be2net: use CSR-BAR SEMAPHORE reg for BE2/BE3

The SLIPORT_SEMAPHORE register shadowed in the
config-space may not reflect the correct POST stage after
an EEH reset in BE2/3; it may return FW_READY state even though
FW is not ready. This causes the driver to prematurely
poll the FW mailbox and fail.

For BE2/3 use the CSR-BAR/0xac instead.

Reported-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 28ceb84141851e26e8d49f1175099235a512d54b..29aff55f2eea414bf8dec52d61bee70a034fc12c 100644 (file)
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -349,6 +349,7 @@ struct be_adapter {
        struct pci_dev *pdev;
        struct net_device *netdev;
 
+       u8 __iomem *csr;        /* CSR BAR used only for BE2/3 */
        u8 __iomem *db;         /* Door Bell */
 
        struct mutex mbox_lock; /* For serializing mbox cmds to BE card */

diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index 813407f66c7c8dd579588c9afdab2b5d1a28d3a7..3c9b4f12e3e516ff8775c208a3b138c9acd5c109 100644 (file)
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -473,14 +473,17 @@ static int be_mbox_notify_wait(struct be_adapter *adapter)
        return 0;
 }
 
-static void be_POST_stage_get(struct be_adapter *adapter, u16 *stage)
+static u16 be_POST_stage_get(struct be_adapter *adapter)
 {
        u32 sem;
-       u32 reg = skyhawk_chip(adapter) ? SLIPORT_SEMAPHORE_OFFSET_SH :
-                                         SLIPORT_SEMAPHORE_OFFSET_BE;
 
-       pci_read_config_dword(adapter->pdev, reg, &sem);
-       *stage = sem & POST_STAGE_MASK;
+       if (BEx_chip(adapter))
+               sem  = ioread32(adapter->csr + SLIPORT_SEMAPHORE_OFFSET_BEx);
+       else
+               pci_read_config_dword(adapter->pdev,
+                                     SLIPORT_SEMAPHORE_OFFSET_SH, &sem);
+
+       return sem & POST_STAGE_MASK;
 }
 
 int lancer_wait_ready(struct be_adapter *adapter)
@@ -574,7 +577,7 @@ int be_fw_wait_ready(struct be_adapter *adapter)
        }
 
        do {
-               be_POST_stage_get(adapter, &stage);
+               stage = be_POST_stage_get(adapter);
                if (stage == POST_STAGE_ARMFW_RDY)
                        return 0;
 

diff --git a/drivers/net/ethernet/emulex/benet/be_hw.h b/drivers/net/ethernet/emulex/benet/be_hw.h
index 541d4530d5bfadb2d038b3aa4e233a069cf9c94a..62dc220695f724999c8df269531274ba38ec0b4a 100644 (file)
--- a/drivers/net/ethernet/emulex/benet/be_hw.h
+++ b/drivers/net/ethernet/emulex/benet/be_hw.h
@@ -32,8 +32,8 @@
 #define MPU_EP_CONTROL                 0
 
 /********** MPU semphore: used for SH & BE  *************/
-#define SLIPORT_SEMAPHORE_OFFSET_BE            0x7c
-#define SLIPORT_SEMAPHORE_OFFSET_SH            0x94
+#define SLIPORT_SEMAPHORE_OFFSET_BEx           0xac  /* CSR BAR offset */
+#define SLIPORT_SEMAPHORE_OFFSET_SH            0x94  /* PCI-CFG offset */
 #define POST_STAGE_MASK                                0x0000FFFF
 #define POST_ERR_MASK                          0x1
 #define POST_ERR_SHIFT                         31

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 3860888ac711a7fe7630cad2c06bb3819eb1f3a0..08e54f3d288bc9a2e23faa8bb954dcb4bd8cf584 100644 (file)
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -3688,6 +3688,8 @@ static void be_netdev_init(struct net_device *netdev)
 
 static void be_unmap_pci_bars(struct be_adapter *adapter)
 {
+       if (adapter->csr)
+               pci_iounmap(adapter->pdev, adapter->csr);
        if (adapter->db)
                pci_iounmap(adapter->pdev, adapter->db);
 }
@@ -3721,6 +3723,12 @@ static int be_map_pci_bars(struct be_adapter *adapter)
        adapter->if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >>
                                SLI_INTF_IF_TYPE_SHIFT;
 
+       if (BEx_chip(adapter) && be_physfn(adapter)) {
+               adapter->csr = pci_iomap(adapter->pdev, 2, 0);
+               if (adapter->csr == NULL)
+                       return -ENOMEM;
+       }
+
        addr = pci_iomap(adapter->pdev, db_bar(adapter), 0);
        if (addr == NULL)
                goto pci_map_err;
@@ -4329,6 +4337,8 @@ static pci_ers_result_t be_eeh_reset(struct pci_dev *pdev)
        pci_restore_state(pdev);
 
        /* Check if card is ok and fw is ready */
+       dev_info(&adapter->pdev->dev,
+                "Waiting for FW to be ready after EEH reset\n");
        status = be_fw_wait_ready(adapter);
        if (status)
                return PCI_ERS_RESULT_DISCONNECT;