}
}
- /* Save current system state */
-
- if (acpi_gbl_system_awake_and_running) {
- ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_SYSTEM_RUNNING);
- } else {
- ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_SYSTEM_RUNNING);
+ if (!acpi_gbl_system_awake_and_running) {
+ /*
+ * We just woke up because of a wake GPE. Disable any further GPEs
+ * until we are fully up and running (Only wake GPEs should be enabled
+ * at this time, but we just brute-force disable them all.)
+ * 1) We must disable this particular wake GPE so it won't fire again
+ * 2) We want to disable all wake GPEs, since we are now awake
+ */
+ (void)acpi_hw_disable_all_gpes();
}
/*
- * Dispatch the GPE to either an installed handler, or the control
- * method associated with this GPE (_Lxx or _Exx).
- * If a handler exists, we invoke it and do not attempt to run the method.
- * If there is neither a handler nor a method, we disable the level to
- * prevent further events from coming in here.
+ * Dispatch the GPE to either an installed handler, or the control method
+ * associated with this GPE (_Lxx or _Exx). If a handler exists, we invoke
+ * it and do not attempt to run the method. If there is neither a handler
+ * nor a method, we disable this GPE to prevent further such pointless
+ * events from firing.
*/
switch (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
case ACPI_GPE_DISPATCH_HANDLER:
case ACPI_GPE_DISPATCH_METHOD:
/*
- * Disable GPE, so it doesn't keep firing before the method has a
- * chance to run.
+ * Disable the GPE, so it doesn't keep firing before the method has a
+ * chance to run (it runs asynchronously with interrupts enabled).
*/
status = acpi_ev_disable_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
gpe_number));
/*
- * Disable the GPE. The GPE will remain disabled until the ACPI
+ * Disable the GPE. The GPE will remain disabled until the ACPI
* Core Subsystem is restarted, or a handler is installed.
*/
status = acpi_ev_disable_gpe(gpe_event_info);
return_UINT32(ACPI_INTERRUPT_HANDLED);
}
-
-#ifdef ACPI_GPE_NOTIFY_CHECK
-/*******************************************************************************
- * TBD: NOT USED, PROTOTYPE ONLY AND WILL PROBABLY BE REMOVED
- *
- * FUNCTION: acpi_ev_check_for_wake_only_gpe
- *
- * PARAMETERS: gpe_event_info - info for this GPE
- *
- * RETURN: Status
- *
- * DESCRIPTION: Determine if a a GPE is "wake-only".
- *
- * Called from Notify() code in interpreter when a "DeviceWake"
- * Notify comes in.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ev_check_for_wake_only_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(ev_check_for_wake_only_gpe);
-
- if ((gpe_event_info) && /* Only >0 for _Lxx/_Exx */
- ((gpe_event_info->flags & ACPI_GPE_SYSTEM_MASK) == ACPI_GPE_SYSTEM_RUNNING)) { /* System state at GPE time */
- /* This must be a wake-only GPE, disable it */
-
- status = acpi_ev_disable_gpe(gpe_event_info);
-
- /* Set GPE to wake-only. Do not change wake disabled/enabled status */
-
- acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
-
- ACPI_INFO((AE_INFO,
- "GPE %p was updated from wake/run to wake-only",
- gpe_event_info));
-
- /* This was a wake-only GPE */
-
- return_ACPI_STATUS(AE_WAKE_ONLY_GPE);
- }
-
- return_ACPI_STATUS(AE_OK);
-}
-#endif
#define ACPI_INIT_GLOBAL(a,b) a
#endif
-/*
- * Keep local copies of these FADT-based registers. NOTE: These globals
- * are first in this file for alignment reasons on 64-bit systems.
- */
-ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_enable;
-ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_enable;
-
-/*****************************************************************************
- *
- * Debug support
- *
- ****************************************************************************/
-
-/* Runtime configuration of debug print levels */
-
-extern u32 acpi_dbg_level;
-extern u32 acpi_dbg_layer;
-
-/* Procedure nesting level for debug output */
-
-extern u32 acpi_gbl_nesting_level;
-
-/* Event counters */
-
-ACPI_EXTERN u32 acpi_gpe_count;
-
-/* Support for dynamic control method tracing mechanism */
-
-ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
-ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
-ACPI_EXTERN acpi_name acpi_gbl_trace_method_name;
-ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
-ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
-ACPI_EXTERN u32 acpi_gbl_trace_flags;
-
/*****************************************************************************
*
* Runtime configuration (static defaults that can be overriden at runtime)
*/
ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_leave_wake_gpes_disabled, TRUE);
+/*****************************************************************************
+ *
+ * Debug support
+ *
+ ****************************************************************************/
+
+/* Runtime configuration of debug print levels */
+
+extern u32 acpi_dbg_level;
+extern u32 acpi_dbg_layer;
+
+/* Procedure nesting level for debug output */
+
+extern u32 acpi_gbl_nesting_level;
+
+/* Event counters */
+
+ACPI_EXTERN u32 acpi_gpe_count;
+
+/* Support for dynamic control method tracing mechanism */
+
+ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
+ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
+ACPI_EXTERN acpi_name acpi_gbl_trace_method_name;
+ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
+ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
+ACPI_EXTERN u32 acpi_gbl_trace_flags;
+
/*****************************************************************************
*
* ACPI Table globals
#define acpi_fadt acpi_gbl_FADT
extern acpi_native_uint acpi_gbl_permanent_mmap;
+/* These addresses are calculated from FADT address values */
+
+ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_enable;
+ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_enable;
+
/*
* Handle both ACPI 1.0 and ACPI 2.0 Integer widths. The integer width is
* determined by the revision of the DSDT: If the DSDT revision is less than
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff