return status;
}
+/**
+ * i40e_aq_set_phy_config
+ * @hw: pointer to the hw struct
+ * @config: structure with PHY configuration to be set
+ * @cmd_details: pointer to command details structure or NULL
+ *
+ * Set the various PHY configuration parameters
+ * supported on the Port.One or more of the Set PHY config parameters may be
+ * ignored in an MFP mode as the PF may not have the privilege to set some
+ * of the PHY Config parameters. This status will be indicated by the
+ * command response.
+ **/
+enum i40e_status_code i40e_aq_set_phy_config(struct i40e_hw *hw,
+ struct i40e_aq_set_phy_config *config,
+ struct i40e_asq_cmd_details *cmd_details)
+{
+ struct i40e_aq_desc desc;
+ struct i40e_aq_set_phy_config *cmd =
+ (struct i40e_aq_set_phy_config *)&desc.params.raw;
+ enum i40e_status_code status;
+
+ if (!config)
+ return I40E_ERR_PARAM;
+
+ i40e_fill_default_direct_cmd_desc(&desc,
+ i40e_aqc_opc_set_phy_config);
+
+ *cmd = *config;
+
+ status = i40e_asq_send_command(hw, &desc, NULL, 0, cmd_details);
+
+ return status;
+}
+
+/**
+ * i40e_set_fc
+ * @hw: pointer to the hw struct
+ *
+ * Set the requested flow control mode using set_phy_config.
+ **/
+enum i40e_status_code i40e_set_fc(struct i40e_hw *hw, u8 *aq_failures,
+ bool atomic_restart)
+{
+ enum i40e_fc_mode fc_mode = hw->fc.requested_mode;
+ struct i40e_aq_get_phy_abilities_resp abilities;
+ struct i40e_aq_set_phy_config config;
+ enum i40e_status_code status;
+ u8 pause_mask = 0x0;
+
+ *aq_failures = 0x0;
+
+ switch (fc_mode) {
+ case I40E_FC_FULL:
+ pause_mask |= I40E_AQ_PHY_FLAG_PAUSE_TX;
+ pause_mask |= I40E_AQ_PHY_FLAG_PAUSE_RX;
+ break;
+ case I40E_FC_RX_PAUSE:
+ pause_mask |= I40E_AQ_PHY_FLAG_PAUSE_RX;
+ break;
+ case I40E_FC_TX_PAUSE:
+ pause_mask |= I40E_AQ_PHY_FLAG_PAUSE_TX;
+ break;
+ default:
+ break;
+ }
+
+ /* Get the current phy config */
+ status = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
+ NULL);
+ if (status) {
+ *aq_failures |= I40E_SET_FC_AQ_FAIL_GET;
+ return status;
+ }
+
+ memset(&config, 0, sizeof(struct i40e_aq_set_phy_config));
+ /* clear the old pause settings */
+ config.abilities = abilities.abilities & ~(I40E_AQ_PHY_FLAG_PAUSE_TX) &
+ ~(I40E_AQ_PHY_FLAG_PAUSE_RX);
+ /* set the new abilities */
+ config.abilities |= pause_mask;
+ /* If the abilities have changed, then set the new config */
+ if (config.abilities != abilities.abilities) {
+ /* Auto restart link so settings take effect */
+ if (atomic_restart)
+ config.abilities |= I40E_AQ_PHY_ENABLE_ATOMIC_LINK;
+ /* Copy over all the old settings */
+ config.phy_type = abilities.phy_type;
+ config.link_speed = abilities.link_speed;
+ config.eee_capability = abilities.eee_capability;
+ config.eeer = abilities.eeer_val;
+ config.low_power_ctrl = abilities.d3_lpan;
+ status = i40e_aq_set_phy_config(hw, &config, NULL);
+
+ if (status)
+ *aq_failures |= I40E_SET_FC_AQ_FAIL_SET;
+ }
+ /* Update the link info */
+ status = i40e_update_link_info(hw, true);
+ if (status) {
+ /* Wait a little bit (on 40G cards it sometimes takes a really
+ * long time for link to come back from the atomic reset)
+ * and try once more
+ */
+ msleep(1000);
+ status = i40e_update_link_info(hw, true);
+ }
+ if (status)
+ *aq_failures |= I40E_SET_FC_AQ_FAIL_UPDATE;
+
+ return status;
+}
+
/**
* i40e_aq_clear_pxe_mode
* @hw: pointer to the hw struct
(struct i40e_aqc_get_link_status *)&desc.params.raw;
struct i40e_link_status *hw_link_info = &hw->phy.link_info;
i40e_status status;
+ bool tx_pause, rx_pause;
u16 command_flags;
i40e_fill_default_direct_cmd_desc(&desc, i40e_aqc_opc_get_link_status);
hw_link_info->max_frame_size = le16_to_cpu(resp->max_frame_size);
hw_link_info->pacing = resp->config & I40E_AQ_CONFIG_PACING_MASK;
+ /* update fc info */
+ tx_pause = !!(resp->an_info & I40E_AQ_LINK_PAUSE_TX);
+ rx_pause = !!(resp->an_info & I40E_AQ_LINK_PAUSE_RX);
+ if (tx_pause & rx_pause)
+ hw->fc.current_mode = I40E_FC_FULL;
+ else if (tx_pause)
+ hw->fc.current_mode = I40E_FC_TX_PAUSE;
+ else if (rx_pause)
+ hw->fc.current_mode = I40E_FC_RX_PAUSE;
+ else
+ hw->fc.current_mode = I40E_FC_NONE;
+
if (resp->config & I40E_AQ_CONFIG_CRC_ENA)
hw_link_info->crc_enable = true;
else
static int i40e_up_complete(struct i40e_vsi *vsi)
{
struct i40e_pf *pf = vsi->back;
+ u8 set_fc_aq_fail = 0;
int err;
+ /* force flow control off */
+ i40e_set_fc(&pf->hw, &set_fc_aq_fail, true);
+
if (pf->flags & I40E_FLAG_MSIX_ENABLED)
i40e_vsi_configure_msix(vsi);
else
**/
static int i40e_setup_pf_switch(struct i40e_pf *pf, bool reinit)
{
- u32 rxfc = 0, txfc = 0, rxfc_reg;
int ret;
/* find out what's out there already */
/* Initialize user-specific link properties */
pf->fc_autoneg_status = ((pf->hw.phy.link_info.an_info &
I40E_AQ_AN_COMPLETED) ? true : false);
- /* requested_mode is set in probe or by ethtool */
- if (!pf->fc_autoneg_status)
- goto no_autoneg;
-
- if ((pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_TX) &&
- (pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_RX))
- pf->hw.fc.current_mode = I40E_FC_FULL;
- else if (pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_TX)
- pf->hw.fc.current_mode = I40E_FC_TX_PAUSE;
- else if (pf->hw.phy.link_info.an_info & I40E_AQ_LINK_PAUSE_RX)
- pf->hw.fc.current_mode = I40E_FC_RX_PAUSE;
- else
- pf->hw.fc.current_mode = I40E_FC_NONE;
-
- /* sync the flow control settings with the auto-neg values */
- switch (pf->hw.fc.current_mode) {
- case I40E_FC_FULL:
- txfc = 1;
- rxfc = 1;
- break;
- case I40E_FC_TX_PAUSE:
- txfc = 1;
- rxfc = 0;
- break;
- case I40E_FC_RX_PAUSE:
- txfc = 0;
- rxfc = 1;
- break;
- case I40E_FC_NONE:
- case I40E_FC_DEFAULT:
- txfc = 0;
- rxfc = 0;
- break;
- case I40E_FC_PFC:
- /* TBD */
- break;
- /* no default case, we have to handle all possibilities here */
- }
-
- wr32(&pf->hw, I40E_PRTDCB_FCCFG, txfc << I40E_PRTDCB_FCCFG_TFCE_SHIFT);
-
- rxfc_reg = rd32(&pf->hw, I40E_PRTDCB_MFLCN) &
- ~I40E_PRTDCB_MFLCN_RFCE_MASK;
- rxfc_reg |= (rxfc << I40E_PRTDCB_MFLCN_RFCE_SHIFT);
-
- wr32(&pf->hw, I40E_PRTDCB_MFLCN, rxfc_reg);
-
- goto fc_complete;
-
-no_autoneg:
- /* disable L2 flow control, user can turn it on if they wish */
- wr32(&pf->hw, I40E_PRTDCB_FCCFG, 0);
- wr32(&pf->hw, I40E_PRTDCB_MFLCN, rd32(&pf->hw, I40E_PRTDCB_MFLCN) &
- ~I40E_PRTDCB_MFLCN_RFCE_MASK);
-fc_complete:
i40e_ptp_init(pf);
return ret;
struct i40e_asq_cmd_details *cmd_details);
i40e_status i40e_aq_set_default_vsi(struct i40e_hw *hw, u16 vsi_id,
struct i40e_asq_cmd_details *cmd_details);
+enum i40e_status_code i40e_aq_get_phy_capabilities(struct i40e_hw *hw,
+ bool qualified_modules, bool report_init,
+ struct i40e_aq_get_phy_abilities_resp *abilities,
+ struct i40e_asq_cmd_details *cmd_details);
+enum i40e_status_code i40e_aq_set_phy_config(struct i40e_hw *hw,
+ struct i40e_aq_set_phy_config *config,
+ struct i40e_asq_cmd_details *cmd_details);
+enum i40e_status_code i40e_set_fc(struct i40e_hw *hw, u8 *aq_failures,
+ bool atomic_reset);
i40e_status i40e_aq_clear_pxe_mode(struct i40e_hw *hw,
struct i40e_asq_cmd_details *cmd_details);
i40e_status i40e_aq_set_link_restart_an(struct i40e_hw *hw,
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff