#undef __BFP
+/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/
+/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
+#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
+#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
+
+/* TWI_PRESCALE Masks */
+#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
+#define TWI_ENA 0x0080 /* TWI Enable */
+#define SCCB 0x0200 /* SCCB Compatibility Enable */
+
+/* TWI_SLAVE_CTL Masks */
+#define SEN 0x0001 /* Slave Enable */
+#define SADD_LEN 0x0002 /* Slave Address Length */
+#define STDVAL 0x0004 /* Slave Transmit Data Valid */
+#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
+#define GEN 0x0010 /* General Call Address Matching Enabled */
+
+/* TWI_SLAVE_STAT Masks */
+#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
+#define GCALL 0x0002 /* General Call Indicator */
+
+/* TWI_MASTER_CTL Masks */
+#define MEN 0x0001 /* Master Mode Enable */
+#define MADD_LEN 0x0002 /* Master Address Length */
+#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
+#define FAST 0x0008 /* Use Fast Mode Timing Specs */
+#define STOP 0x0010 /* Issue Stop Condition */
+#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
+#define DCNT 0x3FC0 /* Data Bytes To Transfer */
+#define SDAOVR 0x4000 /* Serial Data Override */
+#define SCLOVR 0x8000 /* Serial Clock Override */
+
+/* TWI_MASTER_STAT Masks */
+#define MPROG 0x0001 /* Master Transfer In Progress */
+#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
+#define ANAK 0x0004 /* Address Not Acknowledged */
+#define DNAK 0x0008 /* Data Not Acknowledged */
+#define BUFRDERR 0x0010 /* Buffer Read Error */
+#define BUFWRERR 0x0020 /* Buffer Write Error */
+#define SDASEN 0x0040 /* Serial Data Sense */
+#define SCLSEN 0x0080 /* Serial Clock Sense */
+#define BUSBUSY 0x0100 /* Bus Busy Indicator */
+
+/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
+#define SINIT 0x0001 /* Slave Transfer Initiated */
+#define SCOMP 0x0002 /* Slave Transfer Complete */
+#define SERR 0x0004 /* Slave Transfer Error */
+#define SOVF 0x0008 /* Slave Overflow */
+#define MCOMP 0x0010 /* Master Transfer Complete */
+#define MERR 0x0020 /* Master Transfer Error */
+#define XMTSERV 0x0040 /* Transmit FIFO Service */
+#define RCVSERV 0x0080 /* Receive FIFO Service */
+
+/* TWI_FIFO_CTRL Masks */
+#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
+#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
+#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
+#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
+
+/* TWI_FIFO_STAT Masks */
+#define XMTSTAT 0x0003 /* Transmit FIFO Status */
+#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
+#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
+#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
+
+#define RCVSTAT 0x000C /* Receive FIFO Status */
+#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
+#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
+#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
+
#endif
#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */
-/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/
-/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
-#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
-#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
-
-/* TWI_PRESCALE Masks */
-#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
-#define TWI_ENA 0x0080 /* TWI Enable */
-#define SCCB 0x0200 /* SCCB Compatibility Enable */
-
-/* TWI_SLAVE_CTL Masks */
-#define SEN 0x0001 /* Slave Enable */
-#define SADD_LEN 0x0002 /* Slave Address Length */
-#define STDVAL 0x0004 /* Slave Transmit Data Valid */
-#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
-
-/* TWI_SLAVE_STAT Masks */
-#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
-#define GCALL 0x0002 /* General Call Indicator */
-
-/* TWI_MASTER_CTL Masks */
-#define MEN 0x0001 /* Master Mode Enable */
-#define MADD_LEN 0x0002 /* Master Address Length */
-#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
-#define FAST 0x0008 /* Use Fast Mode Timing Specs */
-#define STOP 0x0010 /* Issue Stop Condition */
-#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
-#define DCNT 0x3FC0 /* Data Bytes To Transfer */
-#define SDAOVR 0x4000 /* Serial Data Override */
-#define SCLOVR 0x8000 /* Serial Clock Override */
-
-/* TWI_MASTER_STAT Masks */
-#define MPROG 0x0001 /* Master Transfer In Progress */
-#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
-#define ANAK 0x0004 /* Address Not Acknowledged */
-#define DNAK 0x0008 /* Data Not Acknowledged */
-#define BUFRDERR 0x0010 /* Buffer Read Error */
-#define BUFWRERR 0x0020 /* Buffer Write Error */
-#define SDASEN 0x0040 /* Serial Data Sense */
-#define SCLSEN 0x0080 /* Serial Clock Sense */
-#define BUSBUSY 0x0100 /* Bus Busy Indicator */
-
-/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
-#define SINIT 0x0001 /* Slave Transfer Initiated */
-#define SCOMP 0x0002 /* Slave Transfer Complete */
-#define SERR 0x0004 /* Slave Transfer Error */
-#define SOVF 0x0008 /* Slave Overflow */
-#define MCOMP 0x0010 /* Master Transfer Complete */
-#define MERR 0x0020 /* Master Transfer Error */
-#define XMTSERV 0x0040 /* Transmit FIFO Service */
-#define RCVSERV 0x0080 /* Receive FIFO Service */
-
-/* TWI_FIFO_CTRL Masks */
-#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
-#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
-#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
-#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
-
-/* TWI_FIFO_STAT Masks */
-#define XMTSTAT 0x0003 /* Transmit FIFO Status */
-#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
-#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
-#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
-
-#define RCVSTAT 0x000C /* Receive FIFO Status */
-#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
-#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
-#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
-
-
/* ******************* PIN CONTROL REGISTER MASKS ************************/
/* PORT_MUX Masks */
#define PJSE 0x0001 /* Port J SPI/SPORT Enable */
#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */
-/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/
-/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
-#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
-#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
-
-/* TWI_PRESCALE Masks */
-#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
-#define TWI_ENA 0x0080 /* TWI Enable */
-#define SCCB 0x0200 /* SCCB Compatibility Enable */
-
-/* TWI_SLAVE_CTL Masks */
-#define SEN 0x0001 /* Slave Enable */
-#define SADD_LEN 0x0002 /* Slave Address Length */
-#define STDVAL 0x0004 /* Slave Transmit Data Valid */
-#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
-
-/* TWI_SLAVE_STAT Masks */
-#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
-#define GCALL 0x0002 /* General Call Indicator */
-
-/* TWI_MASTER_CTL Masks */
-#define MEN 0x0001 /* Master Mode Enable */
-#define MADD_LEN 0x0002 /* Master Address Length */
-#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
-#define FAST 0x0008 /* Use Fast Mode Timing Specs */
-#define STOP 0x0010 /* Issue Stop Condition */
-#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
-#define DCNT 0x3FC0 /* Data Bytes To Transfer */
-#define SDAOVR 0x4000 /* Serial Data Override */
-#define SCLOVR 0x8000 /* Serial Clock Override */
-
-/* TWI_MASTER_STAT Masks */
-#define MPROG 0x0001 /* Master Transfer In Progress */
-#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
-#define ANAK 0x0004 /* Address Not Acknowledged */
-#define DNAK 0x0008 /* Data Not Acknowledged */
-#define BUFRDERR 0x0010 /* Buffer Read Error */
-#define BUFWRERR 0x0020 /* Buffer Write Error */
-#define SDASEN 0x0040 /* Serial Data Sense */
-#define SCLSEN 0x0080 /* Serial Clock Sense */
-#define BUSBUSY 0x0100 /* Bus Busy Indicator */
-
-/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
-#define SINIT 0x0001 /* Slave Transfer Initiated */
-#define SCOMP 0x0002 /* Slave Transfer Complete */
-#define SERR 0x0004 /* Slave Transfer Error */
-#define SOVF 0x0008 /* Slave Overflow */
-#define MCOMP 0x0010 /* Master Transfer Complete */
-#define MERR 0x0020 /* Master Transfer Error */
-#define XMTSERV 0x0040 /* Transmit FIFO Service */
-#define RCVSERV 0x0080 /* Receive FIFO Service */
-
-/* TWI_FIFO_CTRL Masks */
-#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
-#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
-#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
-#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
-
-/* TWI_FIFO_STAT Masks */
-#define XMTSTAT 0x0003 /* Transmit FIFO Status */
-#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
-#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
-#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
-
-#define RCVSTAT 0x000C /* Receive FIFO Status */
-#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
-#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
-#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
-
-
/* Omit CAN masks from defBF534.h */
/* ******************* PIN CONTROL REGISTER MASKS ************************/
#define ERR_DET 0x4000 /* Error Detected Indicator */
#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */
-/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/
-/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
-#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
-#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
-
-/* TWI_PRESCALE Masks */
-#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
-#define TWI_ENA 0x0080 /* TWI Enable */
-#define SCCB 0x0200 /* SCCB Compatibility Enable */
-
-/* TWI_SLAVE_CTL Masks */
-#define SEN 0x0001 /* Slave Enable */
-#define SADD_LEN 0x0002 /* Slave Address Length */
-#define STDVAL 0x0004 /* Slave Transmit Data Valid */
-#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Address Matching Enabled */
-
-/* TWI_SLAVE_STAT Masks */
-#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
-#define GCALL 0x0002 /* General Call Indicator */
-
-/* TWI_MASTER_CTL Masks */
-#define MEN 0x0001 /* Master Mode Enable */
-#define MADD_LEN 0x0002 /* Master Address Length */
-#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
-#define FAST 0x0008 /* Use Fast Mode Timing Specs */
-#define STOP 0x0010 /* Issue Stop Condition */
-#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
-#define DCNT 0x3FC0 /* Data Bytes To Transfer */
-#define SDAOVR 0x4000 /* Serial Data Override */
-#define SCLOVR 0x8000 /* Serial Clock Override */
-
-/* TWI_MASTER_STAT Masks */
-#define MPROG 0x0001 /* Master Transfer In Progress */
-#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
-#define ANAK 0x0004 /* Address Not Acknowledged */
-#define DNAK 0x0008 /* Data Not Acknowledged */
-#define BUFRDERR 0x0010 /* Buffer Read Error */
-#define BUFWRERR 0x0020 /* Buffer Write Error */
-#define SDASEN 0x0040 /* Serial Data Sense */
-#define SCLSEN 0x0080 /* Serial Clock Sense */
-#define BUSBUSY 0x0100 /* Bus Busy Indicator */
-
-/* TWI_INT_SRC and TWI_INT_ENABLE Masks */
-#define SINIT 0x0001 /* Slave Transfer Initiated */
-#define SCOMP 0x0002 /* Slave Transfer Complete */
-#define SERR 0x0004 /* Slave Transfer Error */
-#define SOVF 0x0008 /* Slave Overflow */
-#define MCOMP 0x0010 /* Master Transfer Complete */
-#define MERR 0x0020 /* Master Transfer Error */
-#define XMTSERV 0x0040 /* Transmit FIFO Service */
-#define RCVSERV 0x0080 /* Receive FIFO Service */
-
-/* TWI_FIFO_CTRL Masks */
-#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
-#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
-#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
-#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
-
-/* TWI_FIFO_STAT Masks */
-#define XMTSTAT 0x0003 /* Transmit FIFO Status */
-#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
-#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
-#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
-
-#define RCVSTAT 0x000C /* Receive FIFO Status */
-#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
-#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
-#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
/* ******************* PIN CONTROL REGISTER MASKS ************************/
/* PORT_MUX Masks */
#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */
#define BGSTAT 0x00000020 /* Bus granted */
-
-/* ******************** TWO-WIRE INTERFACE (TWIx) MASKS ***********************/
-/* TWIx_CLKDIV Macros (Use: *pTWIx_CLKDIV = CLKLOW(x)|CLKHI(y); ) */
-#ifdef _MISRA_RULES
-#define CLKLOW(x) ((x) & 0xFFu) /* Periods Clock Is Held Low */
-#define CLKHI(y) (((y)&0xFFu)<<0x8) /* Periods Before New Clock Low */
-#else
-#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */
-#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */
-#endif /* _MISRA_RULES */
-
-/* TWIx_PRESCALE Masks */
-#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */
-#define TWI_ENA 0x0080 /* TWI Enable */
-#define SCCB 0x0200 /* SCCB Compatibility Enable */
-
-/* TWIx_SLAVE_CTRL Masks */
-#define SEN 0x0001 /* Slave Enable */
-#define SADD_LEN 0x0002 /* Slave Address Length */
-#define STDVAL 0x0004 /* Slave Transmit Data Valid */
-#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
-
-/* TWIx_SLAVE_STAT Masks */
-#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
-#define GCALL 0x0002 /* General Call Indicator */
-
-/* TWIx_MASTER_CTRL Masks */
-#define MEN 0x0001 /* Master Mode Enable */
-#define MADD_LEN 0x0002 /* Master Address Length */
-#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */
-#define FAST 0x0008 /* Use Fast Mode Timing Specs */
-#define STOP 0x0010 /* Issue Stop Condition */
-#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */
-#define DCNT 0x3FC0 /* Data Bytes To Transfer */
-#define SDAOVR 0x4000 /* Serial Data Override */
-#define SCLOVR 0x8000 /* Serial Clock Override */
-
-/* TWIx_MASTER_STAT Masks */
-#define MPROG 0x0001 /* Master Transfer In Progress */
-#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */
-#define ANAK 0x0004 /* Address Not Acknowledged */
-#define DNAK 0x0008 /* Data Not Acknowledged */
-#define BUFRDERR 0x0010 /* Buffer Read Error */
-#define BUFWRERR 0x0020 /* Buffer Write Error */
-#define SDASEN 0x0040 /* Serial Data Sense */
-#define SCLSEN 0x0080 /* Serial Clock Sense */
-#define BUSBUSY 0x0100 /* Bus Busy Indicator */
-
-/* TWIx_INT_SRC and TWIx_INT_ENABLE Masks */
-#define SINIT 0x0001 /* Slave Transfer Initiated */
-#define SCOMP 0x0002 /* Slave Transfer Complete */
-#define SERR 0x0004 /* Slave Transfer Error */
-#define SOVF 0x0008 /* Slave Overflow */
-#define MCOMP 0x0010 /* Master Transfer Complete */
-#define MERR 0x0020 /* Master Transfer Error */
-#define XMTSERV 0x0040 /* Transmit FIFO Service */
-#define RCVSERV 0x0080 /* Receive FIFO Service */
-
-/* TWIx_FIFO_CTL Masks */
-#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */
-#define RCVFLUSH 0x0002 /* Receive Buffer Flush */
-#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */
-#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */
-
-/* TWIx_FIFO_STAT Masks */
-#define XMTSTAT 0x0003 /* Transmit FIFO Status */
-#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */
-#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */
-#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */
-
-#define RCVSTAT 0x000C /* Receive FIFO Status */
-#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */
-#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */
-#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */
-
#endif
#define LOW_EVEN 0xff0000 /* Lower Limit for Even Bytes (Luma) */
#define HIGH_EVEN 0xff000000 /* Upper Limit for Even Bytes (Luma) */
-/* ************************************************ */
-/* The TWI bit masks fields are from the ADSP-BF538 */
-/* and they have not been verified as the final */
-/* ones for the Moab processors ... bz 1/19/2007 */
-/* ************************************************ */
-
-/* Bit masks for TWIx_CONTROL */
-
-#define PRESCALE 0x7f /* Prescale Value */
-#define TWI_ENA 0x80 /* TWI Enable */
-#define SCCB 0x200 /* Serial Camera Control Bus */
-
-/* Bit maskes for TWIx_CLKDIV */
-
-#define CLKLOW 0xff /* Clock Low */
-#define CLKHI 0xff00 /* Clock High */
-
-/* Bit maskes for TWIx_SLAVE_CTL */
-
-#define SEN 0x1 /* Slave Enable */
-#define STDVAL 0x4 /* Slave Transmit Data Valid */
-#define NAK 0x8 /* Not Acknowledge */
-#define GEN 0x10 /* General Call Enable */
-
-/* Bit maskes for TWIx_SLAVE_ADDR */
-
-#define SADDR 0x7f /* Slave Mode Address */
-
-/* Bit maskes for TWIx_SLAVE_STAT */
-
-#define SDIR 0x1 /* Slave Transfer Direction */
-#define GCALL 0x2 /* General Call */
-
-/* Bit maskes for TWIx_MASTER_CTL */
-
-#define MEN 0x1 /* Master Mode Enable */
-#define MDIR 0x4 /* Master Transfer Direction */
-#define FAST 0x8 /* Fast Mode */
-#define STOP 0x10 /* Issue Stop Condition */
-#define RSTART 0x20 /* Repeat Start */
-#define DCNT 0x3fc0 /* Data Transfer Count */
-#define SDAOVR 0x4000 /* Serial Data Override */
-#define SCLOVR 0x8000 /* Serial Clock Override */
-
-/* Bit maskes for TWIx_MASTER_ADDR */
-
-#define MADDR 0x7f /* Master Mode Address */
-
-/* Bit maskes for TWIx_MASTER_STAT */
-
-#define MPROG 0x1 /* Master Transfer in Progress */
-#define LOSTARB 0x2 /* Lost Arbitration */
-#define ANAK 0x4 /* Address Not Acknowledged */
-#define DNAK 0x8 /* Data Not Acknowledged */
-#define BUFRDERR 0x10 /* Buffer Read Error */
-#define BUFWRERR 0x20 /* Buffer Write Error */
-#define SDASEN 0x40 /* Serial Data Sense */
-#define SCLSEN 0x80 /* Serial Clock Sense */
-#define BUSBUSY 0x100 /* Bus Busy */
-
-/* Bit maskes for TWIx_FIFO_CTL */
-
-#define XMTFLUSH 0x1 /* Transmit Buffer Flush */
-#define RCVFLUSH 0x2 /* Receive Buffer Flush */
-#define XMTINTLEN 0x4 /* Transmit Buffer Interrupt Length */
-#define RCVINTLEN 0x8 /* Receive Buffer Interrupt Length */
-
-/* Bit maskes for TWIx_FIFO_STAT */
-
-#define XMTSTAT 0x3 /* Transmit FIFO Status */
-#define RCVSTAT 0xc /* Receive FIFO Status */
-
-/* Bit maskes for TWIx_INT_MASK */
-
-#define SINITM 0x1 /* Slave Transfer Initiated Interrupt Mask */
-#define SCOMPM 0x2 /* Slave Transfer Complete Interrupt Mask */
-#define SERRM 0x4 /* Slave Transfer Error Interrupt Mask */
-#define SOVFM 0x8 /* Slave Overflow Interrupt Mask */
-#define MCOMPM 0x10 /* Master Transfer Complete Interrupt Mask */
-#define MERRM 0x20 /* Master Transfer Error Interrupt Mask */
-#define XMTSERVM 0x40 /* Transmit FIFO Service Interrupt Mask */
-#define RCVSERVM 0x80 /* Receive FIFO Service Interrupt Mask */
-
-/* Bit maskes for TWIx_INT_STAT */
-
-#define SINIT 0x1 /* Slave Transfer Initiated */
-#define SCOMP 0x2 /* Slave Transfer Complete */
-#define SERR 0x4 /* Slave Transfer Error */
-#define SOVF 0x8 /* Slave Overflow */
-#define MCOMP 0x10 /* Master Transfer Complete */
-#define MERR 0x20 /* Master Transfer Error */
-#define XMTSERV 0x40 /* Transmit FIFO Service */
-#define RCVSERV 0x80 /* Receive FIFO Service */
-
-/* Bit maskes for TWIx_XMT_DATA8 */
-
-#define XMTDATA8 0xff /* Transmit FIFO 8-Bit Data */
-
-/* Bit maskes for TWIx_XMT_DATA16 */
-
-#define XMTDATA16 0xffff /* Transmit FIFO 16-Bit Data */
-
-/* Bit maskes for TWIx_RCV_DATA8 */
-
-#define RCVDATA8 0xff /* Receive FIFO 8-Bit Data */
-
-/* Bit maskes for TWIx_RCV_DATA16 */
-
-#define RCVDATA16 0xffff /* Receive FIFO 16-Bit Data */
/* ******************************************* */
/* MULTI BIT MACRO ENUMERATIONS */
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / commitdiff