static irqreturn_t handle_interrupt(int irq, void *d PT_REGS_ARG);
static int dio_config_block_size(struct comedi_device * dev, unsigned int * data);
-#undef HPDI_DEBUG // disable debugging messages
-//#define HPDI_DEBUG // enable debugging code
+#undef HPDI_DEBUG /* disable debugging messages */
+/* #define HPDI_DEBUG enable debugging code */
#ifdef HPDI_DEBUG
#define DEBUG_PRINT(format, args...) rt_printk(format , ## args )
#define DEBUG_PRINT(format, args...)
#endif
-#define TIMER_BASE 50 // 20MHz master clock
+#define TIMER_BASE 50 /* 20MHz master clock */
#define DMA_BUFFER_SIZE 0x10000
#define NUM_DMA_BUFFERS 4
#define NUM_DMA_DESCRIPTORS 256
-// indices of base address regions
+/* indices of base address regions */
enum base_address_regions {
PLX9080_BADDRINDEX = 0,
HPDI_BADDRINDEX = 2,
return 1;
}
-// bit definitions
+/* bit definitions */
enum firmware_revision_bits {
FEATURES_REG_PRESENT_BIT = 0x8000,
uint32_t almost_full_bits(unsigned int num_words)
{
-// XXX need to add or subtract one?
+/* XXX need to add or subtract one? */
return (num_words << 16) & 0xff0000;
}
}
unsigned int almost_full_num_words(uint32_t bits)
{
-// XXX need to add or subtract one?
+/* XXX need to add or subtract one? */
return (bits >> 16) & 0xffff;
}
unsigned int almost_empty_num_words(uint32_t bits)
struct hpdi_board {
char *name;
- int device_id; // pci device id
- int subdevice_id; // pci subdevice id
+ int device_id; /* pci device id */
+ int subdevice_id; /* pci subdevice id */
};
struct hpdi_private {
- struct pci_dev *hw_dev; // pointer to board's pci_dev struct
- // base addresses (physical)
+ struct pci_dev *hw_dev; /* pointer to board's pci_dev struct */
+ /* base addresses (physical) */
resource_size_t plx9080_phys_iobase;
resource_size_t hpdi_phys_iobase;
- // base addresses (ioremapped)
+ /* base addresses (ioremapped) */
void *plx9080_iobase;
void *hpdi_iobase;
- uint32_t *dio_buffer[NUM_DMA_BUFFERS]; // dma buffers
- dma_addr_t dio_buffer_phys_addr[NUM_DMA_BUFFERS]; // physical addresses of dma buffers
- struct plx_dma_desc *dma_desc; // array of dma descriptors read by plx9080, allocated to get proper alignment
- dma_addr_t dma_desc_phys_addr; // physical address of dma descriptor array
+ uint32_t *dio_buffer[NUM_DMA_BUFFERS]; /* dma buffers */
+ dma_addr_t dio_buffer_phys_addr[NUM_DMA_BUFFERS]; /* physical addresses of dma buffers */
+ struct plx_dma_desc *dma_desc; /* array of dma descriptors read by plx9080, allocated to get proper alignment */
+ dma_addr_t dma_desc_phys_addr; /* physical address of dma descriptor array */
unsigned int num_dma_descriptors;
- uint32_t *desc_dio_buffer[NUM_DMA_DESCRIPTORS]; // pointer to start of buffers indexed by descriptor
- volatile unsigned int dma_desc_index; // index of the dma descriptor that is currently being used
+ uint32_t *desc_dio_buffer[NUM_DMA_DESCRIPTORS]; /* pointer to start of buffers indexed by descriptor */
+ volatile unsigned int dma_desc_index; /* index of the dma descriptor that is currently being used */
unsigned int tx_fifo_size;
unsigned int rx_fifo_size;
volatile unsigned long dio_count;
- volatile uint32_t bits[24]; // software copies of values written to hpdi registers
- volatile unsigned int block_size; // number of bytes at which to generate COMEDI_CB_BLOCK events
+ volatile uint32_t bits[24]; /* software copies of values written to hpdi registers */
+ volatile unsigned int block_size; /* number of bytes at which to generate COMEDI_CB_BLOCK events */
unsigned dio_config_output:1;
};
writel(0, priv(dev)->plx9080_iobase + PLX_INTRCS_REG);
}
-// initialize plx9080 chip
+/* initialize plx9080 chip */
static void init_plx9080(struct comedi_device * dev)
{
uint32_t bits;
void *plx_iobase = priv(dev)->plx9080_iobase;
- // plx9080 dump
+ /* plx9080 dump */
DEBUG_PRINT(" plx interrupt status 0x%x\n",
readl(plx_iobase + PLX_INTRCS_REG));
DEBUG_PRINT(" plx id bits 0x%x\n", readl(plx_iobase + PLX_ID_REG));
abort_dma(dev, 0);
abort_dma(dev, 1);
- // configure dma0 mode
+ /* configure dma0 mode */
bits = 0;
- // enable ready input
+ /* enable ready input */
bits |= PLX_DMA_EN_READYIN_BIT;
- // enable dma chaining
+ /* enable dma chaining */
bits |= PLX_EN_CHAIN_BIT;
- // enable interrupt on dma done (probably don't need this, since chain never finishes)
+ /* enable interrupt on dma done (probably don't need this, since chain never finishes) */
bits |= PLX_EN_DMA_DONE_INTR_BIT;
- // don't increment local address during transfers (we are transferring from a fixed fifo register)
+ /* don't increment local address during transfers (we are transferring from a fixed fifo register) */
bits |= PLX_LOCAL_ADDR_CONST_BIT;
- // route dma interrupt to pci bus
+ /* route dma interrupt to pci bus */
bits |= PLX_DMA_INTR_PCI_BIT;
- // enable demand mode
+ /* enable demand mode */
bits |= PLX_DEMAND_MODE_BIT;
- // enable local burst mode
+ /* enable local burst mode */
bits |= PLX_DMA_LOCAL_BURST_EN_BIT;
bits |= PLX_LOCAL_BUS_32_WIDE_BITS;
writel(bits, plx_iobase + PLX_DMA0_MODE_REG);
writel(0, priv(dev)->hpdi_iobase + INTERRUPT_CONTROL_REG);
- // enable interrupts
+ /* enable interrupts */
plx_intcsr_bits =
ICS_AERR | ICS_PERR | ICS_PIE | ICS_PLIE | ICS_PAIE | ICS_LIE |
ICS_DMA0_E;
return 0;
}
-// setup dma descriptors so a link completes every 'transfer_size' bytes
+/* setup dma descriptors so a link completes every 'transfer_size' bytes */
static int setup_dma_descriptors(struct comedi_device * dev,
unsigned int transfer_size)
{
(unsigned long)priv(dev)->dma_desc[i].next);
}
priv(dev)->num_dma_descriptors = i;
- // fix last descriptor to point back to first
+ /* fix last descriptor to point back to first */
priv(dev)->dma_desc[i - 1].next =
cpu_to_le32(priv(dev)->dma_desc_phys_addr | next_bits);
DEBUG_PRINT(" desc %i next fixup 0x%lx\n", i - 1,
pcidev = pci_get_subsys(PCI_VENDOR_ID_PLX,
hpdi_boards[i].device_id, PCI_VENDOR_ID_PLX,
hpdi_boards[i].subdevice_id, pcidev);
- // was a particular bus/slot requested?
+ /* was a particular bus/slot requested? */
if (it->options[0] || it->options[1]) {
- // are we on the wrong bus/slot?
+ /* are we on the wrong bus/slot? */
if (pcidev->bus->number != it->options[0] ||
PCI_SLOT(pcidev->devfn) !=
it->options[1])
}
pci_set_master(pcidev);
- //Initialize dev->board_name
+ /* Initialize dev->board_name */
dev->board_name = board(dev)->name;
priv(dev)->plx9080_phys_iobase =
priv(dev)->hpdi_phys_iobase =
pci_resource_start(pcidev, HPDI_BADDRINDEX);
- // remap, won't work with 2.0 kernels but who cares
+ /* remap, won't work with 2.0 kernels but who cares */
priv(dev)->plx9080_iobase = ioremap(priv(dev)->plx9080_phys_iobase,
pci_resource_len(pcidev, PLX9080_BADDRINDEX));
priv(dev)->hpdi_iobase = ioremap(priv(dev)->hpdi_phys_iobase,
init_plx9080(dev);
- // get irq
+ /* get irq */
if (comedi_request_irq(pcidev->irq, handle_interrupt, IRQF_SHARED,
driver_hpdi.driver_name, dev)) {
printk(" unable to allocate irq %u\n", pcidev->irq);
printk(" irq %u\n", dev->irq);
- // alocate pci dma buffers
+ /* alocate pci dma buffers */
for (i = 0; i < NUM_DMA_BUFFERS; i++) {
priv(dev)->dio_buffer[i] =
pci_alloc_consistent(priv(dev)->hw_dev, DMA_BUFFER_SIZE,
priv(dev)->dio_buffer[i],
(unsigned long)priv(dev)->dio_buffer_phys_addr[i]);
}
- // allocate dma descriptors
+ /* allocate dma descriptors */
priv(dev)->dma_desc = pci_alloc_consistent(priv(dev)->hw_dev,
sizeof(struct plx_dma_desc) * NUM_DMA_DESCRIPTORS,
&priv(dev)->dma_desc_phys_addr);
}
if (priv(dev)->hpdi_iobase)
iounmap((void *)priv(dev)->hpdi_iobase);
- // free pci dma buffers
+ /* free pci dma buffers */
for (i = 0; i < NUM_DMA_BUFFERS; i++) {
if (priv(dev)->dio_buffer[i])
pci_free_consistent(priv(dev)->hw_dev,
priv(dev)->
dio_buffer_phys_addr[i]);
}
- // free dma descriptors
+ /* free dma descriptors */
if (priv(dev)->dma_desc)
pci_free_consistent(priv(dev)->hw_dev,
sizeof(struct plx_dma_desc) *
/* step 2: make sure trigger sources are unique and mutually compatible */
- // uniqueness check
+ /* uniqueness check */
if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE)
err++;
if (cmd->chanlist) {
for (i = 1; i < cmd->chanlist_len; i++) {
if (CR_CHAN(cmd->chanlist[i]) != i) {
- // XXX could support 8 channels or 16 channels
+ /* XXX could support 8 channels or 16 channels */
comedi_error(dev,
"chanlist must be channels 0 to 31 in order");
err++;
writel(0, priv(dev)->plx9080_iobase + PLX_DMA0_TRANSFER_SIZE_REG);
writel(0, priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG);
writel(0, priv(dev)->plx9080_iobase + PLX_DMA0_LOCAL_ADDRESS_REG);
- // give location of first dma descriptor
+ /* give location of first dma descriptor */
bits = priv(dev)->
dma_desc_phys_addr | PLX_DESC_IN_PCI_BIT | PLX_INTR_TERM_COUNT |
PLX_XFER_LOCAL_TO_PCI;
writel(bits, priv(dev)->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG);
- // spinlock for plx dma control/status reg
+ /* spinlock for plx dma control/status reg */
comedi_spin_lock_irqsave(&dev->spinlock, flags);
- // enable dma transfer
+ /* enable dma transfer */
writeb(PLX_DMA_EN_BIT | PLX_DMA_START_BIT | PLX_CLEAR_DMA_INTR_BIT,
priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
else
priv(dev)->dio_count = 1;
- // clear over/under run status flags
+ /* clear over/under run status flags */
writel(RX_UNDERRUN_BIT | RX_OVERRUN_BIT,
priv(dev)->hpdi_iobase + BOARD_STATUS_REG);
- // enable interrupts
+ /* enable interrupts */
writel(intr_bit(RX_FULL_INTR),
priv(dev)->hpdi_iobase + INTERRUPT_CONTROL_REG);
pci_addr_reg =
priv(dev)->plx9080_iobase + PLX_DMA0_PCI_ADDRESS_REG;
- // loop until we have read all the full buffers
+ /* loop until we have read all the full buffers */
j = 0;
for (next_transfer_addr = readl(pci_addr_reg);
(next_transfer_addr <
dma_desc_index].pci_start_addr) +
priv(dev)->block_size)
&& j < priv(dev)->num_dma_descriptors; j++) {
- // transfer data from dma buffer to comedi buffer
+ /* transfer data from dma buffer to comedi buffer */
num_samples = priv(dev)->block_size / sizeof(uint32_t);
if (async->cmd.stop_src == TRIG_COUNT) {
if (num_samples > priv(dev)->dio_count)
priv(dev)->dma_desc[priv(dev)->dma_desc_index].next);
DEBUG_PRINT("pci addr reg 0x%x\n", next_transfer_addr);
}
- // XXX check for buffer overrun somehow
+ /* XXX check for buffer overrun somehow */
}
static irqreturn_t handle_interrupt(int irq, void *d PT_REGS_ARG)
writel(hpdi_intr_status,
priv(dev)->hpdi_iobase + INTERRUPT_STATUS_REG);
}
- // spin lock makes sure noone else changes plx dma control reg
+ /* spin lock makes sure noone else changes plx dma control reg */
comedi_spin_lock_irqsave(&dev->spinlock, flags);
dma0_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
- if (plx_status & ICS_DMA0_A) { // dma chan 0 interrupt
+ if (plx_status & ICS_DMA0_A) { /* dma chan 0 interrupt */
writeb((dma0_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
}
comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
- // spin lock makes sure noone else changes plx dma control reg
+ /* spin lock makes sure noone else changes plx dma control reg */
comedi_spin_lock_irqsave(&dev->spinlock, flags);
dma1_status = readb(priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
- if (plx_status & ICS_DMA1_A) // XXX
- { // dma chan 1 interrupt
+ if (plx_status & ICS_DMA1_A) /* XXX */
+ { /* dma chan 1 interrupt */
writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
DEBUG_PRINT("dma1 status 0x%x\n", dma1_status);
}
comedi_spin_unlock_irqrestore(&dev->spinlock, flags);
- // clear possible plx9080 interrupt sources
- if (plx_status & ICS_LDIA) { // clear local doorbell interrupt
+ /* clear possible plx9080 interrupt sources */
+ if (plx_status & ICS_LDIA) { /* clear local doorbell interrupt */
plx_bits = readl(priv(dev)->plx9080_iobase + PLX_DBR_OUT_REG);
writel(plx_bits, priv(dev)->plx9080_iobase + PLX_DBR_OUT_REG);
DEBUG_PRINT(" cleared local doorbell bits 0x%x\n", plx_bits);
{
unsigned long flags;
- // spinlock for plx dma control/status reg
+ /* spinlock for plx dma control/status reg */
comedi_spin_lock_irqsave(&dev->spinlock, flags);
plx9080_abort_dma(priv(dev)->plx9080_iobase, channel);
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / commitdiff