[PATCH] skge: remove Yukon2 related special cases
authorStephen Hemminger <shemminger@osdl.org>
Mon, 27 Jun 2005 18:33:09 +0000 (11:33 -0700)
committerJeff Garzik <jgarzik@pobox.com>
Mon, 27 Jun 2005 22:05:06 +0000 (18:05 -0400)
Remove the bits and pieces added relating to Yukon II chipset.
The Yukon 2 will be in a separate driver.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
drivers/net/skge.c

index 8fd7981e95a8113fe1c8c8af5835fdc6babb4e4f..c29e187f90c6fdfabcbe338fd6fb8515f1248647 100644 (file)
@@ -205,9 +205,6 @@ static int skge_get_settings(struct net_device *dev,
                        if (hw->chip_id == CHIP_ID_YUKON)
                                ecmd->supported &= ~SUPPORTED_1000baseT_Half;
 
-                       else if (hw->chip_id == CHIP_ID_YUKON_FE)
-                               ecmd->supported &= ~(SUPPORTED_1000baseT_Half
-                                                    | SUPPORTED_1000baseT_Full);
                }
 
                ecmd->port = PORT_TP;
@@ -248,9 +245,6 @@ static u32 skge_modes(const struct skge_hw *hw)
                        modes &= ~ADVERTISED_1000baseT_Half;
                        break;
 
-               case CHIP_ID_YUKON_FE:
-                       modes &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
-                       break;
                }
        } else {
                modes |= ADVERTISED_FIBRE;
@@ -270,8 +264,6 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
        } else {
                switch (ecmd->speed) {
                case SPEED_1000:
-                       if (hw->chip_id == CHIP_ID_YUKON_FE)
-                               return -EINVAL;
                        break;
                case SPEED_100:
                case SPEED_10:
@@ -540,8 +532,6 @@ static inline u32 hwkhz(const struct skge_hw *hw)
 {
        if (hw->chip_id == CHIP_ID_GENESIS)
                return 53215; /* or:  53.125 MHz */
-       else if (hw->chip_id == CHIP_ID_YUKON_EC)
-               return 125000; /* or: 125.000 MHz */
        else
                return 78215; /* or:  78.125 MHz */
 }
@@ -1598,11 +1588,7 @@ static void yukon_init(struct skge_hw *hw, int port)
                          PHY_M_EC_MAC_S_MSK);
                ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ);
 
-               /* on PHY 88E1111 there is a change for downshift control */
-               if (hw->chip_id == CHIP_ID_YUKON_EC)
-                       ectrl |= PHY_M_EC_M_DSC_2(0) | PHY_M_EC_DOWN_S_ENA;
-               else
-                       ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
+               ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1);
 
                gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl);
        }
@@ -1688,8 +1674,7 @@ static void yukon_init(struct skge_hw *hw, int port)
                ctrl |= PHY_CT_RESET;
        }
 
-       if (hw->chip_id != CHIP_ID_YUKON_FE)
-               gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
+       gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000);
 
        gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv);
        gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl);
@@ -1698,22 +1683,10 @@ static void yukon_init(struct skge_hw *hw, int port)
        ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS);
        ledover = 0;
 
-       if (hw->chip_id == CHIP_ID_YUKON_FE) {
-               /* on 88E3082 these bits are at 11..9 (shifted left) */
-               ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1;
+       ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
 
-               gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR,
-                                 ((gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR)
-
-                                   & ~PHY_M_FELP_LED1_MSK)
-                                  | PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL)));
-       } else {
-               /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
-               ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
-
-               /* turn off the Rx LED (LED_RX) */
-               ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
-       }
+       /* turn off the Rx LED (LED_RX) */
+       ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
 
        /* disable blink mode (LED_DUPLEX) on collisions */
        ctrl |= PHY_M_LEDC_DP_CTRL;
@@ -1928,9 +1901,6 @@ static void yukon_mac_intr(struct skge_hw *hw, int port)
 
 static u16 yukon_speed(const struct skge_hw *hw, u16 aux)
 {
-       if (hw->chip_id == CHIP_ID_YUKON_FE)
-               return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10;
-
        switch (aux & PHY_M_PS_SPEED_MSK) {
        case PHY_M_PS_SPEED_1000:
                return SPEED_1000;
@@ -1975,8 +1945,7 @@ static void yukon_link_down(struct skge_port *skge)
                          gm_phy_read(hw, port, GM_GP_CTRL)
                          & ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA));
 
-       if (hw->chip_id != CHIP_ID_YUKON_FE &&
-           skge->flow_control == FLOW_MODE_REM_SEND) {
+       if (skge->flow_control == FLOW_MODE_REM_SEND) {
                /* restore Asymmetric Pause bit */
                gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
                                  gm_phy_read(hw, port,
@@ -2009,9 +1978,7 @@ static void yukon_phy_intr(struct skge_port *skge)
                        goto failed;
                }
 
-               if (!(hw->chip_id == CHIP_ID_YUKON_FE || hw->chip_id == CHIP_ID_YUKON_EC)
-                   && (gm_phy_read(hw, port, PHY_MARV_1000T_STAT)
-                       & PHY_B_1000S_MSF)) {
+               if (gm_phy_read(hw, port, PHY_MARV_1000T_STAT) & PHY_B_1000S_MSF) {
                        reason = "master/slave fault";
                        goto failed;
                }
@@ -2025,10 +1992,6 @@ static void yukon_phy_intr(struct skge_port *skge)
                        ? DUPLEX_FULL : DUPLEX_HALF;
                skge->speed = yukon_speed(hw, phystat);
 
-               /* Tx & Rx Pause Enabled bits are at 9..8 */
-               if (hw->chip_id == CHIP_ID_YUKON_XL)
-                       phystat >>= 6;
-
                /* We are using IEEE 802.3z/D5.0 Table 37-4 */
                switch (phystat & PHY_M_PS_PAUSE_MSK) {
                case PHY_M_PS_PAUSE_MSK:
@@ -2875,9 +2838,6 @@ static const struct {
        { CHIP_ID_YUKON,         "Yukon" },
        { CHIP_ID_YUKON_LITE,    "Yukon-Lite"},
        { CHIP_ID_YUKON_LP,      "Yukon-LP"},
-       { CHIP_ID_YUKON_XL,      "Yukon-2 XL"},
-       { CHIP_ID_YUKON_EC,      "YUKON-2 EC"},
-       { CHIP_ID_YUKON_FE,      "YUKON-2 FE"},
 };
 
 static const char *skge_board_name(const struct skge_hw *hw)