sc92031: stop using net_device.{base_addr, irq}

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

diff --git a/drivers/net/ethernet/silan/sc92031.c b/drivers/net/ethernet/silan/sc92031.c
index a284d6440538309cc801a9d87685af2037cc7c5b..32e55664df6e3d0dc7dd384fb763beb74cccb4ae 100644 (file)
--- a/drivers/net/ethernet/silan/sc92031.c
+++ b/drivers/net/ethernet/silan/sc92031.c
@@ -39,9 +39,7 @@
 #define SC92031_NAME "sc92031"
 
 /* BAR 0 is MMIO, BAR 1 is PIO */
-#ifndef SC92031_USE_BAR
-#define SC92031_USE_BAR 0
-#endif
+#define SC92031_USE_PIO        0
 
 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). */
 static int multicast_filter_limit = 64;
@@ -366,7 +364,7 @@ static void sc92031_disable_interrupts(struct net_device *dev)
        mmiowb();
 
        /* wait for any concurrent interrupt/tasklet to finish */
-       synchronize_irq(dev->irq);
+       synchronize_irq(priv->pdev->irq);
        tasklet_disable(&priv->tasklet);
 }
 
@@ -1114,10 +1112,13 @@ static void sc92031_tx_timeout(struct net_device *dev)
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void sc92031_poll_controller(struct net_device *dev)
 {
-       disable_irq(dev->irq);
-       if (sc92031_interrupt(dev->irq, dev) != IRQ_NONE)
+       struct sc92031_priv *priv = netdev_priv(dev);
+       const int irq = priv->pdev->irq;
+
+       disable_irq(irq);
+       if (sc92031_interrupt(irq, dev) != IRQ_NONE)
                sc92031_tasklet((unsigned long)dev);
-       enable_irq(dev->irq);
+       enable_irq(irq);
 }
 #endif
 
@@ -1402,7 +1403,6 @@ static int __devinit sc92031_probe(struct pci_dev *pdev,
        struct net_device *dev;
        struct sc92031_priv *priv;
        u32 mac0, mac1;
-       unsigned long base_addr;
 
        err = pci_enable_device(pdev);
        if (unlikely(err < 0))
@@ -1422,7 +1422,7 @@ static int __devinit sc92031_probe(struct pci_dev *pdev,
        if (unlikely(err < 0))
                goto out_request_regions;
 
-       port_base = pci_iomap(pdev, SC92031_USE_BAR, 0);
+       port_base = pci_iomap(pdev, SC92031_USE_PIO, 0);
        if (unlikely(!port_base)) {
                err = -EIO;
                goto out_iomap;
@@ -1437,14 +1437,6 @@ static int __devinit sc92031_probe(struct pci_dev *pdev,
        pci_set_drvdata(pdev, dev);
        SET_NETDEV_DEV(dev, &pdev->dev);
 
-#if SC92031_USE_BAR == 0
-       dev->mem_start = pci_resource_start(pdev, SC92031_USE_BAR);
-       dev->mem_end = pci_resource_end(pdev, SC92031_USE_BAR);
-#elif SC92031_USE_BAR == 1
-       dev->base_addr = pci_resource_start(pdev, SC92031_USE_BAR);
-#endif
-       dev->irq = pdev->irq;
-
        /* faked with skb_copy_and_csum_dev */
        dev->features = NETIF_F_SG | NETIF_F_HIGHDMA |
                NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
@@ -1478,13 +1470,9 @@ static int __devinit sc92031_probe(struct pci_dev *pdev,
        if (err < 0)
                goto out_register_netdev;
 
-#if SC92031_USE_BAR == 0
-       base_addr = dev->mem_start;
-#elif SC92031_USE_BAR == 1
-       base_addr = dev->base_addr;
-#endif
        printk(KERN_INFO "%s: SC92031 at 0x%lx, %pM, IRQ %d\n", dev->name,
-                       base_addr, dev->dev_addr, dev->irq);
+              (long)pci_resource_start(pdev, SC92031_USE_PIO), dev->dev_addr,
+              pdev->irq);
 
        return 0;