pcmcia serial_cs.c: fix multifunction card handling
authorDominik Brodowski <linux@dominikbrodowski.net>
Mon, 30 Aug 2010 06:18:54 +0000 (08:18 +0200)
committerDominik Brodowski <linux@dominikbrodowski.net>
Wed, 15 Sep 2010 15:56:32 +0000 (17:56 +0200)
We shouldn't overwrite pre-set values, and we should also
set the port address to the beginning, and not the end of
the 8-port range.

CC: linux-serial@vger.kernel.org
Reported-by: Komuro <komurojun-mbn@nifty.com>
Hardware-supplied-by: Jochen Frieling <j.frieling@pengutronix.de>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
drivers/serial/serial_cs.c

index 141c69554bd481d27863b852bbd79b364417643e..7d475b2a79e8bb7fee0cd8f1f048fc61d1b7db3c 100644 (file)
@@ -335,8 +335,6 @@ static int serial_probe(struct pcmcia_device *link)
        info->p_dev = link;
        link->priv = info;
 
-       link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-       link->resource[0]->end = 8;
        link->conf.Attributes = CONF_ENABLE_IRQ;
        if (do_sound) {
                link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -411,6 +409,27 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
 
 /*====================================================================*/
 
+static int pfc_config(struct pcmcia_device *p_dev)
+{
+       unsigned int port = 0;
+       struct serial_info *info = p_dev->priv;
+
+       if ((p_dev->resource[1]->end != 0) &&
+               (resource_size(p_dev->resource[1]) == 8)) {
+               port = p_dev->resource[1]->start;
+               info->slave = 1;
+       } else if ((info->manfid == MANFID_OSITECH) &&
+               (resource_size(p_dev->resource[0]) == 0x40)) {
+               port = p_dev->resource[0]->start + 0x28;
+               info->slave = 1;
+       }
+       if (info->slave)
+               return setup_serial(p_dev, info, port, p_dev->irq);
+
+       dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
+       return -ENODEV;
+}
+
 static int simple_config_check(struct pcmcia_device *p_dev,
                               cistpl_cftable_entry_t *cf,
                               cistpl_cftable_entry_t *dflt,
@@ -461,23 +480,8 @@ static int simple_config(struct pcmcia_device *link)
        struct serial_info *info = link->priv;
        int i = -ENODEV, try;
 
-       /* If the card is already configured, look up the port and irq */
-       if (link->function_config) {
-               unsigned int port = 0;
-               if ((link->resource[1]->end != 0) &&
-                       (resource_size(link->resource[1]) == 8)) {
-                       port = link->resource[1]->end;
-                       info->slave = 1;
-               } else if ((info->manfid == MANFID_OSITECH) &&
-                       (resource_size(link->resource[0]) == 0x40)) {
-                       port = link->resource[0]->start + 0x28;
-                       info->slave = 1;
-               }
-               if (info->slave) {
-                       return setup_serial(link, info, port,
-                                           link->irq);
-               }
-       }
+       link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+       link->resource[0]->end = 8;
 
        /* First pass: look for a config entry that looks normal.
         * Two tries: without IO aliases, then with aliases */
@@ -491,8 +495,7 @@ static int simple_config(struct pcmcia_device *link)
        if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
                goto found_port;
 
-       printk(KERN_NOTICE
-              "serial_cs: no usable port range found, giving up\n");
+       dev_warn(&link->dev, "no usable port range found, giving up\n");
        return -1;
 
 found_port:
@@ -558,6 +561,7 @@ static int multi_config(struct pcmcia_device *link)
        int i, base2 = 0;
 
        /* First, look for a generic full-sized window */
+       link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
        link->resource[0]->end = info->multi * 8;
        if (pcmcia_loop_config(link, multi_config_check, &base2)) {
                /* If that didn't work, look for two windows */
@@ -565,15 +569,14 @@ static int multi_config(struct pcmcia_device *link)
                info->multi = 2;
                if (pcmcia_loop_config(link, multi_config_check_notpicky,
                                       &base2)) {
-                       printk(KERN_NOTICE "serial_cs: no usable port range"
+                       dev_warn(&link->dev, "no usable port range "
                               "found, giving up\n");
                        return -ENODEV;
                }
        }
 
        if (!link->irq)
-               dev_warn(&link->dev,
-                       "serial_cs: no usable IRQ found, continuing...\n");
+               dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
 
        /*
         * Apply any configuration quirks.
@@ -675,6 +678,7 @@ static int serial_config(struct pcmcia_device * link)
           multifunction cards that ask for appropriate IO port ranges */
        if ((info->multi == 0) &&
            (link->has_func_id) &&
+           (link->socket->pcmcia_pfc == 0) &&
            ((link->func_id == CISTPL_FUNCID_MULTI) ||
             (link->func_id == CISTPL_FUNCID_SERIAL)))
                pcmcia_loop_config(link, serial_check_for_multi, info);
@@ -685,7 +689,13 @@ static int serial_config(struct pcmcia_device * link)
        if (info->quirk && info->quirk->multi != -1)
                info->multi = info->quirk->multi;
 
-       if (info->multi > 1)
+       dev_info(&link->dev,
+               "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
+               link->manf_id, link->card_id,
+               link->socket->pcmcia_pfc, info->multi, info->quirk);
+       if (link->socket->pcmcia_pfc)
+               i = pfc_config(link);
+       else if (info->multi > 1)
                i = multi_config(link);
        else
                i = simple_config(link);
@@ -704,7 +714,7 @@ static int serial_config(struct pcmcia_device * link)
        return 0;
 
 failed:
-       dev_warn(&link->dev, "serial_cs: failed to initialize\n");
+       dev_warn(&link->dev, "failed to initialize\n");
        serial_remove(link);
        return -ENODEV;
 }