#ifdef CONFIG_PPC64
KEEP(*(.head.text.first_256B));
#ifdef CONFIG_PPC_BOOK3E
-# define END_FIXED 0x100
#else
KEEP(*(.head.text.real_vectors));
*(.head.text.real_trampolines);
*(.head.text.virt_trampolines);
# if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
KEEP(*(.head.data.fwnmi_page));
-# define END_FIXED 0x8000
-# else
-# define END_FIXED 0x7000
# endif
#endif
- ASSERT((. == END_FIXED), "vmlinux.lds.S: fixed section overflow error");
#else /* !CONFIG_PPC64 */
HEAD_TEXT
#endif
__head_end = .;
- /*
- * If the build dies here, it's likely code in head_64.S is referencing
- * labels it can't reach, and the linker inserting stubs without the
- * assembler's knowledge. To debug, remove the above assert and
- * rebuild. Look for branch stubs in the fixed section region.
- *
- * Linker stub generation could be allowed in "trampoline"
- * sections if absolutely necessary, but this would require
- * some rework of the fixed sections. Before resorting to this,
- * consider references that have sufficient addressing range,
- * (e.g., hand coded trampolines) so the linker does not have
- * to add stubs.
- *
- * Linker stubs at the top of the main text section are currently not
- * detected, and will result in a crash at boot due to offsets being
- * wrong.
- */
#ifdef CONFIG_PPC64
/*
* BLOCK(0) overrides the default output section alignment because
--- /dev/null
+# Copyright © 2016 IBM Corporation
+
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version
+# 2 of the License, or (at your option) any later version.
+
+# This script checks the head of a vmlinux for linker stubs that
+# break our placement of fixed-location code for 64-bit.
+
+# based on relocs_check.pl
+# Copyright © 2009 IBM Corporation
+
+# NOTE!
+#
+# If the build dies here, it's likely code in head_64.S/exception-64*.S or
+# nearby, is branching to labels it can't reach directly, which results in the
+# linker inserting branch stubs. This can move code around in ways that break
+# the fixed section calculations (head-64.h). To debug this, disassemble the
+# vmlinux and look for branch stubs (long_branch, plt_branch, etc.) in the
+# fixed section region (0 - 0x8000ish). Check what code is calling those stubs,
+# and perhaps change so a direct branch can reach.
+#
+# A ".linker_stub_catch" section is used to catch some stubs generated by
+# early .text code, which tend to get placed at the start of the section.
+# If there are too many such stubs, they can overflow this section. Expanding
+# it may help (or reducing the number of stub branches).
+#
+# Linker stubs use the TOC pointer, so even if fixed section code could
+# tolerate them being inserted into head code, they can't be allowed in low
+# level entry code (boot, interrupt vectors, etc) until r2 is set up. This
+# could cause the kernel to die in early boot.
+
+# Turn this on if you want more debug output:
+# set -x
+
+if [ $# -lt 2 ]; then
+ echo "$0 [path to nm] [path to vmlinux]" 1>&2
+ exit 1
+fi
+
+# Have Kbuild supply the path to nm so we handle cross compilation.
+nm="$1"
+vmlinux="$2"
+
+# gcc-4.6-era toolchain make _stext an A (absolute) symbol rather than T
+$nm "$vmlinux" | grep -e " [TA] _stext$" -e " t start_first_256B$" -e " a text_start$" -e " t start_text$" -m4 > .tmp_symbols.txt
+
+
+vma=$(cat .tmp_symbols.txt | grep -e " [TA] _stext$" | cut -d' ' -f1)
+
+expected_start_head_addr=$vma
+
+start_head_addr=$(cat .tmp_symbols.txt | grep " t start_first_256B$" | cut -d' ' -f1)
+
+if [ "$start_head_addr" != "$expected_start_head_addr" ]; then
+ echo "ERROR: head code starts at $start_head_addr, should be $expected_start_head_addr"
+ echo "ERROR: try to enable LD_HEAD_STUB_CATCH config option"
+ echo "ERROR: see comments in arch/powerpc/tools/head_check.sh"
+
+ exit 1
+fi
+
+top_vma=$(echo $vma | cut -d'0' -f1)
+
+expected_start_text_addr=$(cat .tmp_symbols.txt | grep " a text_start$" | cut -d' ' -f1 | sed "s/^0/$top_vma/")
+
+start_text_addr=$(cat .tmp_symbols.txt | grep " t start_text$" | cut -d' ' -f1)
+
+if [ "$start_text_addr" != "$expected_start_text_addr" ]; then
+ echo "ERROR: start_text address is $start_text_addr, should be $expected_start_text_addr"
+ echo "ERROR: try to enable LD_HEAD_STUB_CATCH config option"
+ echo "ERROR: see comments in arch/powerpc/tools/head_check.sh"
+
+ exit 1
+fi
+
+rm -f .tmp_symbols.txt
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff