ARM: dts: Add basic support for zoom3

I've tested serial, MMC, smsc911x and wl12xx on zoom3. As my
omap is an early ES revision, I have not been able to test
off-idle on this one. But anyways, I'd say we have enough
device tree support for the zoom to be able to drop the
board-zoom files. Patches are welcome to add further features
to this .dts file.

Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 96d8f1f5043089780bce57c6a2197e8b9de5a5e5..841cd634d95d92a71460837c63efbb79b8cc6929 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -178,6 +178,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
        omap3-gta04.dtb \
        omap3-igep0020.dtb \
        omap3-igep0030.dtb \
+       omap3-zoom3.dtb \
        omap4-panda.dtb \
        omap4-panda-a4.dtb \
        omap4-panda-es.dtb \

diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
new file mode 100644 (file)
index 0000000..b0ee342
--- /dev/null
+++ b/arch/arm/boot/dts/omap-zoom-common.dtsi
@@ -0,0 +1,33 @@
+/*
+ * Common features on the Zoom debug board
+ */
+
+#include "omap-gpmc-smsc911x.dtsi"
+
+&gpmc {
+       ranges = <3 0 0x10000000 0x00000400>,
+                <7 0 0x2c000000 0x01000000>;
+
+       /*
+        * Four port TL16CP754C serial port on GPMC,
+        * they probably share the same GPIO IRQ
+        * REVISIT: Add timing support from slls644g.pdf
+        */
+       8250@3,0 {
+               compatible = "ns16550a";
+               reg = <3 0 0x100>;
+               bank-width = <2>;
+               reg-shift = <1>;
+               reg-io-width = <1>;
+               interrupt-parent = <&gpio4>;
+               interrupts = <6 IRQ_TYPE_EDGE_RISING>;  /* gpio102 */
+               clock-frequency = <1843200>;
+               current-speed = <115200>;
+       };
+
+       ethernet@gpmc {
+               reg = <7 0 0xff>;
+               interrupt-parent = <&gpio5>;
+               interrupts = <30 IRQ_TYPE_LEVEL_LOW>;   /* gpio158 */
+       };
+};

diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
new file mode 100644 (file)
index 0000000..15eb9fe
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -0,0 +1,217 @@
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap-zoom-common.dtsi"
+
+/ {
+       model = "TI Zoom3";
+       compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3";
+
+       cpus {
+               cpu@0 {
+                       cpu0-supply = <&vcc>;
+               };
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x80000000 0x20000000>; /* 512 MB */
+       };
+
+       vddvario: regulator-vddvario {
+                 compatible = "regulator-fixed";
+                 regulator-name = "vddvario";
+                 regulator-always-on;
+       };
+
+       vdd33a: regulator-vdd33a {
+               compatible = "regulator-fixed";
+               regulator-name = "vdd33a";
+               regulator-always-on;
+       };
+
+       wl12xx_vmmc: wl12xx_vmmc {
+               pinctrl-names = "default";
+               pinctrl-0 = <&wl12xx_gpio>;
+               compatible = "regulator-fixed";
+               regulator-name = "vwl1271";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               gpio = <&gpio4 5 0>;    /* gpio101 */
+               startup-delay-us = <70000>;
+               enable-active-high;
+       };
+};
+
+&omap3_pmx_core {
+       /* REVISIT: twl gpio0 is mmc0_cd */
+       mmc1_pins: pinmux_mmc1_pins {
+               pinctrl-single,pins = <
+                       0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* sdmmc1_clk.sdmmc1_clk */
+                       0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0)   /* sdmmc1_cmd.sdmmc1_cmd */
+                       0x118 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat0.sdmmc1_dat0 */
+                       0x11a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat1.sdmmc1_dat1 */
+                       0x11c (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat2.sdmmc1_dat2 */
+                       0x11e (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc1_dat3.sdmmc1_dat3 */
+               >;
+       };
+
+       mmc2_pins: pinmux_mmc2_pins {
+               pinctrl-single,pins = <
+                       0x128 (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_clk.sdmmc2_clk */
+                       0x12a (PIN_INPUT_PULLUP | MUX_MODE0)    /* sdmmc2_cmd.sdmmc2_cmd */
+                       0x12c (PIN_INPUT | MUX_MODE0)           /* sdmmc2_dat0.sdmmc2_dat0 */
+                       0x12e (PIN_INPUT | MUX_MODE0)           /* sdmmc2_dat1.sdmmc2_dat1 */
+                       0x130 (PIN_INPUT | MUX_MODE0)           /* sdmmc2_dat2.sdmmc2_dat2 */
+                       0x132 (PIN_INPUT | MUX_MODE0)           /* sdmmc2_dat3.sdmmc2_dat3 */
+                       0x134 (PIN_INPUT | MUX_MODE0)           /* sdmmc2_dat4.sdmmc2_dat4 */
+                       0x136 (PIN_INPUT | MUX_MODE0)           /* sdmmc2_dat5.sdmmc2_dat5 */
+                       0x138 (PIN_INPUT | MUX_MODE0)           /* sdmmc2_dat6.sdmmc2_dat6 */
+                       0x13a (PIN_INPUT | MUX_MODE0)           /* sdmmc2_dat7.sdmmc2_dat7 */
+               >;
+       };
+
+       mmc3_pins: pinmux_mmc3_pins {
+               pinctrl-single,pins = <
+                       0x168 (PIN_INPUT | MUX_MODE4)   /* mcbsp1_clkx.gpio_162 WLAN IRQ */
+                       0x1a0 (PIN_INPUT_PULLUP | MUX_MODE3)    /* mcspi1_cs1.sdmmc3_cmd */
+                       0x5a8 (PIN_INPUT_PULLUP | MUX_MODE2)    /* etk_clk.sdmmc3_clk */
+                       0x5b4 (PIN_INPUT_PULLUP | MUX_MODE2)    /* etk_d4.sdmmc3_dat0 */
+                       0x5b6 (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+                       0x5b8 (PIN_INPUT_PULLUP | MUX_MODE2)    /* etk_d6.sdmmc3_dat2 */
+                       0x5b2 (PIN_INPUT_PULLUP | MUX_MODE2)    /* etk_d3.sdmmc3_dat3 */
+               >;
+       };
+
+       uart1_pins: pinmux_uart1_pins {
+               pinctrl-single,pins = <
+                        0x150 (PIN_INPUT | MUX_MODE0)          /* uart1_cts.uart1_cts */
+                        0x14e (PIN_OUTPUT | MUX_MODE0)         /* uart1_rts.uart1_rts */
+                        0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+                        0x14c (PIN_OUTPUT | MUX_MODE0)         /* uart1_tx.uart1_tx */
+               >;
+       };
+
+       uart2_pins: pinmux_uart2_pins {
+               pinctrl-single,pins = <
+                        0x144 (PIN_INPUT_PULLUP | MUX_MODE0)   /* uart2_cts.uart2_cts */
+                        0x146 (PIN_OUTPUT | MUX_MODE0)         /* uart2_rts.uart2_rts */
+                        0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+                        0x148 (PIN_OUTPUT | MUX_MODE0)         /* uart2_tx.uart2_tx */
+               >;
+       };
+
+       uart3_pins: pinmux_uart3_pins {
+               pinctrl-single,pins = <
+                        0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
+                        0x16c (PIN_OUTPUT | MUX_MODE0)         /* uart3_rts_sd.uart3_rts_sd */
+                        0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+                        0x170 (PIN_OUTPUT | MUX_MODE0)         /* uart3_tx_irtx.uart3_tx_irtx */
+               >;
+       };
+
+       /* wl12xx GPIO output for WLAN_EN */
+       wl12xx_gpio: pinmux_wl12xx_gpio {
+               pinctrl-single,pins = <
+                       0xea (PIN_OUTPUT| MUX_MODE4)            /* cam_d2.gpio_101 */
+               >;
+       };
+};
+
+&omap3_pmx_wkup {
+       wlan_host_wkup: pinmux_wlan_host_wkup_pins {
+               pinctrl-single,pins = <
+                       0x1a (PIN_INPUT_PULLUP | MUX_MODE4)     /* sys_clkout1.gpio_10 WLAN_HOST_WKUP */
+               >;
+       };
+};
+
+&i2c1 {
+       clock-frequency = <2600000>;
+
+       twl: twl@48 {
+               reg = <0x48>;
+               interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+               interrupt-parent = <&intc>;
+       };
+};
+
+#include "twl4030.dtsi"
+
+&i2c2 {
+       clock-frequency = <400000>;
+};
+
+&i2c3 {
+       clock-frequency = <400000>;
+
+       /*
+        * TVP5146 Video decoder-in for analog input support.
+        */
+       tvp5146@5c {
+               compatible = "ti,tvp5146m2";
+               reg = <0x5c>;
+       };
+};
+
+&twl_gpio {
+       ti,use-leds;
+};
+
+&mmc1 {
+       vmmc-supply = <&vmmc1>;
+       vmmc_aux-supply = <&vsim>;
+       bus-width = <4>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc1_pins>;
+};
+/*
+&mmc2 {
+       vmmc-supply = <&vmmc2>;
+       ti,non-removable;
+       bus-width = <8>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc2_pins>;
+};
+*/
+&mmc3 {
+       vmmc-supply = <&wl12xx_vmmc>;
+       non-removable;
+       bus-width = <4>;
+       cap-power-off-card;
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc3_pins>;
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart3_pins>;
+};
+
+&uart4 {
+       status = "disabled";
+};
+
+&usb_otg_hs {
+       interface-type = <0>;
+       usb-phy = <&usb2_phy>;
+       mode = <3>;
+       power = <50>;
+};