#include <linux/dca.h>
#endif
-#define IXGBE_ERR(args...) printk(KERN_ERR "ixgbe: " args)
-
#define PFX "ixgbe: "
#define DPRINTK(nlevel, klevel, fmt, args...) \
((void)((NETIF_MSG_##nlevel & adapter->msg_enable) && \
#define IXGBE_82598_MC_TBL_SIZE 128
#define IXGBE_82598_VFT_TBL_SIZE 128
-static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed,
- bool *autoneg);
-static s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw,
- u32 *speed, bool *autoneg);
+static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg);
static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw);
+static s32 ixgbe_setup_fc_82598(struct ixgbe_hw *hw, s32 packetbuf_num);
static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed,
- bool *link_up,
- bool link_up_wait_to_complete);
-static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
+static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete);
+static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw);
-static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
+static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw);
+static s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+static s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan,
+ u32 vind, bool vlan_on);
+static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw);
+static s32 ixgbe_blink_led_stop_82598(struct ixgbe_hw *hw, u32 index);
+static s32 ixgbe_blink_led_start_82598(struct ixgbe_hw *hw, u32 index);
+static s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val);
+static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val);
+static s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw);
+static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw);
-
+/**
+ */
static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
{
- hw->mac.num_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
- hw->mac.num_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
- hw->mac.mcft_size = IXGBE_82598_MC_TBL_SIZE;
- hw->mac.vft_size = IXGBE_82598_VFT_TBL_SIZE;
- hw->mac.num_rar_entries = IXGBE_82598_RAR_ENTRIES;
-
- /* PHY ops are filled in by default properly for Fiber only */
- if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) {
- hw->mac.ops.setup_link = &ixgbe_setup_copper_link_82598;
- hw->mac.ops.setup_link_speed = &ixgbe_setup_copper_link_speed_82598;
- hw->mac.ops.get_link_settings =
- &ixgbe_get_copper_link_settings_82598;
-
- /* Call PHY identify routine to get the phy type */
- ixgbe_identify_phy(hw);
-
- switch (hw->phy.type) {
- case ixgbe_phy_tn:
- hw->phy.ops.setup_link = &ixgbe_setup_tnx_phy_link;
- hw->phy.ops.check_link = &ixgbe_check_tnx_phy_link;
- hw->phy.ops.setup_link_speed =
- &ixgbe_setup_tnx_phy_link_speed;
- break;
- default:
- break;
- }
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+
+ /* Call PHY identify routine to get the phy type */
+ ixgbe_identify_phy_generic(hw);
+
+ /* PHY Init */
+ switch (phy->type) {
+ default:
+ break;
+ }
+
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+ mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
+ mac->ops.setup_link_speed =
+ &ixgbe_setup_copper_link_speed_82598;
+ mac->ops.get_link_capabilities =
+ &ixgbe_get_copper_link_capabilities_82598;
}
+ mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
+ mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
+ mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
+ mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
+ mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
+
return 0;
}
/**
- * ixgbe_get_link_settings_82598 - Determines default link settings
+ * ixgbe_get_link_capabilities_82598 - Determines link capabilities
* @hw: pointer to hardware structure
* @speed: pointer to link speed
* @autoneg: boolean auto-negotiation value
*
- * Determines the default link settings by reading the AUTOC register.
+ * Determines the link capabilities by reading the AUTOC register.
**/
-static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed,
+static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
bool *autoneg)
{
s32 status = 0;
}
/**
- * ixgbe_get_copper_link_settings_82598 - Determines default link settings
+ * ixgbe_get_copper_link_capabilities_82598 - Determines link capabilities
* @hw: pointer to hardware structure
* @speed: pointer to link speed
* @autoneg: boolean auto-negotiation value
*
- * Determines the default link settings by reading the AUTOC register.
+ * Determines the link capabilities by reading the AUTOC register.
**/
-static s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw,
- u32 *speed, bool *autoneg)
+s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
{
s32 status = IXGBE_ERR_LINK_SETUP;
u16 speed_ability;
*speed = 0;
*autoneg = true;
- status = ixgbe_read_phy_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
IXGBE_MDIO_PMA_PMD_DEV_TYPE,
&speed_ability);
case IXGBE_DEV_ID_82598EB_XF_LR:
media_type = ixgbe_media_type_fiber;
break;
- case IXGBE_DEV_ID_82598AT_DUAL_PORT:
- media_type = ixgbe_media_type_copper;
- break;
default:
media_type = ixgbe_media_type_unknown;
break;
return media_type;
}
+/**
+ * ixgbe_setup_fc_82598 - Configure flow control settings
+ * @hw: pointer to hardware structure
+ * @packetbuf_num: packet buffer number (0-7)
+ *
+ * Configures the flow control settings based on SW configuration. This
+ * function is used for 802.3x flow control configuration only.
+ **/
+s32 ixgbe_setup_fc_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
+{
+ u32 frctl_reg;
+ u32 rmcs_reg;
+
+ if (packetbuf_num < 0 || packetbuf_num > 7) {
+ hw_dbg(hw, "Invalid packet buffer number [%d], expected range is"
+ " 0-7\n", packetbuf_num);
+ }
+
+ frctl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ frctl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
+
+ rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+ rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
+
+ /*
+ * 10 gig parts do not have a word in the EEPROM to determine the
+ * default flow control setting, so we explicitly set it to full.
+ */
+ if (hw->fc.type == ixgbe_fc_default)
+ hw->fc.type = ixgbe_fc_full;
+
+ /*
+ * We want to save off the original Flow Control configuration just in
+ * case we get disconnected and then reconnected into a different hub
+ * or switch with different Flow Control capabilities.
+ */
+ hw->fc.original_type = hw->fc.type;
+
+ /*
+ * The possible values of the "flow_control" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames but not
+ * send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but we do not
+ * support receiving pause frames)
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+ * other: Invalid.
+ */
+ switch (hw->fc.type) {
+ case ixgbe_fc_none:
+ break;
+ case ixgbe_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled,
+ * and Tx Flow control is disabled.
+ */
+ frctl_reg |= IXGBE_FCTRL_RFCE;
+ break;
+ case ixgbe_fc_tx_pause:
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is disabled,
+ * by a software over-ride.
+ */
+ rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+ break;
+ case ixgbe_fc_full:
+ /*
+ * Flow control (both Rx and Tx) is enabled by a software
+ * over-ride.
+ */
+ frctl_reg |= IXGBE_FCTRL_RFCE;
+ rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+ break;
+ default:
+ /* We should never get here. The value should be 0-3. */
+ hw_dbg(hw, "Flow control param set incorrectly\n");
+ break;
+ }
+
+ /* Enable 802.3x based flow control settings. */
+ IXGBE_WRITE_REG(hw, IXGBE_FCTRL, frctl_reg);
+ IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
+
+ /*
+ * Check for invalid software configuration, zeros are completely
+ * invalid for all parameters used past this point, and if we enable
+ * flow control with zero water marks, we blast flow control packets.
+ */
+ if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) {
+ hw_dbg(hw, "Flow control structure initialized incorrectly\n");
+ return IXGBE_ERR_INVALID_LINK_SETTINGS;
+ }
+
+ /*
+ * We need to set up the Receive Threshold high and low water
+ * marks as well as (optionally) enabling the transmission of
+ * XON frames.
+ */
+ if (hw->fc.type & ixgbe_fc_tx_pause) {
+ if (hw->fc.send_xon) {
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
+ (hw->fc.low_water | IXGBE_FCRTL_XONE));
+ } else {
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
+ hw->fc.low_water);
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num),
+ (hw->fc.high_water)|IXGBE_FCRTH_FCEN);
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(0), hw->fc.pause_time);
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
+
+ return 0;
+}
+
/**
* ixgbe_setup_mac_link_82598 - Configures MAC link settings
* @hw: pointer to hardware structure
}
if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
- hw_dbg(hw,
- "Autonegotiation did not complete.\n");
+ hw_dbg(hw, "Autonegotiation did not complete.\n");
}
}
}
* case we get disconnected and then reconnected into a different hub
* or switch with different Flow Control capabilities.
*/
- hw->fc.type = hw->fc.original_type;
- ixgbe_setup_fc(hw, 0);
+ hw->fc.original_type = hw->fc.type;
+ ixgbe_setup_fc_82598(hw, 0);
/* Add delay to filter out noises during initial link setup */
msleep(50);
*
* Reads the links register to determine if link is up and the current speed
**/
-static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, u32 *speed,
- bool *link_up,
- bool link_up_wait_to_complete)
+static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete)
{
u32 links_reg;
u32 i;
links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
-
if (link_up_wait_to_complete) {
for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
if (links_reg & IXGBE_LINKS_UP) {
return 0;
}
+
/**
* ixgbe_setup_mac_link_speed_82598 - Set MAC link speed
* @hw: pointer to hardware structure
* Set the link speed in the AUTOC register and restarts link.
**/
static s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
- u32 speed, bool autoneg,
+ ixgbe_link_speed speed, bool autoneg,
bool autoneg_wait_to_complete)
{
s32 status = 0;
/* If speed is 10G, then check for CX4 or XAUI. */
if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
- (!(hw->mac.link_attach_type & IXGBE_AUTOC_10G_KX4)))
+ (!(hw->mac.link_attach_type & IXGBE_AUTOC_10G_KX4))) {
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN;
- else if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && (!autoneg))
+ } else if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && (!autoneg)) {
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
- else if (autoneg) {
+ } else if (autoneg) {
/* BX mode - Autonegotiate 1G */
if (!(hw->mac.link_attach_type & IXGBE_AUTOC_1G_PMA_PMD))
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_AN;
* ixgbe_hw This will write the AUTOC register based on the new
* stored values
*/
- hw->mac.ops.setup_link(hw);
+ ixgbe_setup_mac_link_82598(hw);
}
return status;
**/
static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw)
{
- s32 status = 0;
+ s32 status;
/* Restart autonegotiation on PHY */
- if (hw->phy.ops.setup_link)
- status = hw->phy.ops.setup_link(hw);
+ status = hw->phy.ops.setup_link(hw);
- /* Set MAC to KX/KX4 autoneg, which defaultis to Parallel detection */
+ /* Set MAC to KX/KX4 autoneg, which defaults to Parallel detection */
hw->mac.link_attach_type = (IXGBE_AUTOC_10G_KX4 | IXGBE_AUTOC_1G_KX);
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN;
/* Set up MAC */
- hw->mac.ops.setup_link(hw);
+ ixgbe_setup_mac_link_82598(hw);
return status;
}
*
* Sets the link speed in the AUTOC register in the MAC and restarts link.
**/
-static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw, u32 speed,
+static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
bool autoneg,
bool autoneg_wait_to_complete)
{
- s32 status = 0;
+ s32 status;
/* Setup the PHY according to input speed */
- if (hw->phy.ops.setup_link_speed)
status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
autoneg_wait_to_complete);
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN;
/* Set up MAC */
- hw->mac.ops.setup_link(hw);
+ ixgbe_setup_mac_link_82598(hw);
return status;
}
* ixgbe_reset_hw_82598 - Performs hardware reset
* @hw: pointer to hardware structure
*
- * Resets the hardware by reseting the transmit and receive units, masks and
+ * Resets the hardware by resetting the transmit and receive units, masks and
* clears all interrupts, performing a PHY reset, and performing a link (MAC)
* reset.
**/
u8 analog_val;
/* Call adapter stop to disable tx/rx and clear interrupts */
- ixgbe_stop_adapter(hw);
+ hw->mac.ops.stop_adapter(hw);
/*
- * Power up the Atlas TX lanes if they are currently powered down.
- * Atlas TX lanes are powered down for MAC loopback tests, but
+ * Power up the Atlas Tx lanes if they are currently powered down.
+ * Atlas Tx lanes are powered down for MAC loopback tests, but
* they are not automatically restored on reset.
*/
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
- /* Enable TX Atlas so packets can be transmitted again */
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
+ /* Enable Tx Atlas so packets can be transmitted again */
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+ &analog_val);
analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
- ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, analog_val);
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+ analog_val);
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, &analog_val);
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+ &analog_val);
analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
- ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, analog_val);
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+ analog_val);
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, &analog_val);
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+ &analog_val);
analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
- ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, analog_val);
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+ analog_val);
- ixgbe_read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, &analog_val);
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+ &analog_val);
analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
- ixgbe_write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, analog_val);
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+ analog_val);
}
/* Reset PHY */
- ixgbe_reset_phy(hw);
+ if (hw->phy.reset_disable == false)
+ hw->phy.ops.reset(hw);
/*
* Prevent the PCI-E bus from from hanging by disabling PCI-E master
}
/* Store the permanent mac address */
- ixgbe_get_mac_addr(hw, hw->mac.perm_addr);
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
return status;
}
+/**
+ * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq set index
+ **/
+s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 rar_high;
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+ rar_high &= ~IXGBE_RAH_VIND_MASK;
+ rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+ return 0;
+}
+
+/**
+ * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq clear index (not used in 82598, but elsewhere)
+ **/
+static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ if (rar < rar_entries) {
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+ if (rar_high & IXGBE_RAH_VIND_MASK) {
+ rar_high &= ~IXGBE_RAH_VIND_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+ }
+ } else {
+ hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_set_vfta_82598 - Set VLAN filter table
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VFTA
+ * @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ *
+ * Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on)
+{
+ u32 regindex;
+ u32 bitindex;
+ u32 bits;
+ u32 vftabyte;
+
+ if (vlan > 4095)
+ return IXGBE_ERR_PARAM;
+
+ /* Determine 32-bit word position in array */
+ regindex = (vlan >> 5) & 0x7F; /* upper seven bits */
+
+ /* Determine the location of the (VMD) queue index */
+ vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
+ bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */
+
+ /* Set the nibble for VMD queue index */
+ bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex));
+ bits &= (~(0x0F << bitindex));
+ bits |= (vind << bitindex);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits);
+
+ /* Determine the location of the bit for this VLAN id */
+ bitindex = vlan & 0x1F; /* lower five bits */
+
+ bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
+ if (vlan_on)
+ /* Turn on this VLAN id */
+ bits |= (1 << bitindex);
+ else
+ /* Turn off this VLAN id */
+ bits &= ~(1 << bitindex);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
+
+ return 0;
+}
+
+/**
+ * ixgbe_clear_vfta_82598 - Clear VLAN filter table
+ * @hw: pointer to hardware structure
+ *
+ * Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
+{
+ u32 offset;
+ u32 vlanbyte;
+
+ for (offset = 0; offset < hw->mac.vft_size; offset++)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+ for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
+ for (offset = 0; offset < hw->mac.vft_size; offset++)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
+ 0);
+
+ return 0;
+}
+
+/**
+ * ixgbe_blink_led_start_82598 - Blink LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
+ **/
+static s32 ixgbe_blink_led_start_82598(struct ixgbe_hw *hw, u32 index)
+{
+ ixgbe_link_speed speed = 0;
+ bool link_up = 0;
+ u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ /*
+ * Link must be up to auto-blink the LEDs on the 82598EB MAC;
+ * force it if link is down.
+ */
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+
+ if (!link_up) {
+ autoc_reg |= IXGBE_AUTOC_FLU;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+ msleep(10);
+ }
+
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg |= IXGBE_LED_BLINK(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_blink_led_stop_82598 - Stop blinking LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to stop blinking
+ **/
+static s32 ixgbe_blink_led_stop_82598(struct ixgbe_hw *hw, u32 index)
+{
+ u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ autoc_reg &= ~IXGBE_AUTOC_FLU;
+ autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg &= ~IXGBE_LED_BLINK(index);
+ led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
+ * @hw: pointer to hardware structure
+ * @reg: analog register to read
+ * @val: read value
+ *
+ * Performs read operation to Atlas analog register specified.
+ **/
+s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+ u32 atlas_ctl;
+
+ IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
+ IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(10);
+ atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
+ *val = (u8)atlas_ctl;
+
+ return 0;
+}
+
+/**
+ * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
+ * @hw: pointer to hardware structure
+ * @reg: atlas register to write
+ * @val: value to write
+ *
+ * Performs write operation to Atlas analog register specified.
+ **/
+s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+ u32 atlas_ctl;
+
+ atlas_ctl = (reg << 8) | val;
+ IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(10);
+
+ return 0;
+}
+
+/**
+ * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current configuration.
+ **/
+s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
+{
+ s32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82598EB_CX4:
+ case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+ break;
+ case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+ case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ break;
+ case IXGBE_DEV_ID_82598EB_XF_LR:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ break;
+
+ default:
+ physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ break;
+ }
+
+ return physical_layer;
+}
+
static struct ixgbe_mac_operations mac_ops_82598 = {
- .reset = &ixgbe_reset_hw_82598,
+ .init_hw = &ixgbe_init_hw_generic,
+ .reset_hw = &ixgbe_reset_hw_82598,
+ .start_hw = &ixgbe_start_hw_generic,
+ .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
.get_media_type = &ixgbe_get_media_type_82598,
+ .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,
+ .get_mac_addr = &ixgbe_get_mac_addr_generic,
+ .stop_adapter = &ixgbe_stop_adapter_generic,
+ .read_analog_reg8 = &ixgbe_read_analog_reg8_82598,
+ .write_analog_reg8 = &ixgbe_write_analog_reg8_82598,
.setup_link = &ixgbe_setup_mac_link_82598,
- .check_link = &ixgbe_check_mac_link_82598,
.setup_link_speed = &ixgbe_setup_mac_link_speed_82598,
- .get_link_settings = &ixgbe_get_link_settings_82598,
+ .check_link = &ixgbe_check_mac_link_82598,
+ .get_link_capabilities = &ixgbe_get_link_capabilities_82598,
+ .led_on = &ixgbe_led_on_generic,
+ .led_off = &ixgbe_led_off_generic,
+ .blink_led_start = &ixgbe_blink_led_start_82598,
+ .blink_led_stop = &ixgbe_blink_led_stop_82598,
+ .set_rar = &ixgbe_set_rar_generic,
+ .clear_rar = &ixgbe_clear_rar_generic,
+ .set_vmdq = &ixgbe_set_vmdq_82598,
+ .clear_vmdq = &ixgbe_clear_vmdq_82598,
+ .init_rx_addrs = &ixgbe_init_rx_addrs_generic,
+ .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic,
+ .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic,
+ .enable_mc = &ixgbe_enable_mc_generic,
+ .disable_mc = &ixgbe_disable_mc_generic,
+ .clear_vfta = &ixgbe_clear_vfta_82598,
+ .set_vfta = &ixgbe_set_vfta_82598,
+ .setup_fc = &ixgbe_setup_fc_82598,
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
+ .init_params = &ixgbe_init_eeprom_params_generic,
+ .read = &ixgbe_read_eeprom_generic,
+ .validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
+ .update_checksum = &ixgbe_update_eeprom_checksum_generic,
+};
+
+static struct ixgbe_phy_operations phy_ops_82598 = {
+ .identify = &ixgbe_identify_phy_generic,
+ /* .identify_sfp = &ixgbe_identify_sfp_module_generic, */
+ .reset = &ixgbe_reset_phy_generic,
+ .read_reg = &ixgbe_read_phy_reg_generic,
+ .write_reg = &ixgbe_write_phy_reg_generic,
+ .setup_link = &ixgbe_setup_phy_link_generic,
+ .setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
};
struct ixgbe_info ixgbe_82598_info = {
.mac = ixgbe_mac_82598EB,
.get_invariants = &ixgbe_get_invariants_82598,
.mac_ops = &mac_ops_82598,
+ .eeprom_ops = &eeprom_ops_82598,
+ .phy_ops = &phy_ops_82598,
};
#include "ixgbe_common.h"
#include "ixgbe_phy.h"
-static s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw);
-
static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw);
+static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw);
static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw);
static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw);
+static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw);
+static void ixgbe_standby_eeprom(struct ixgbe_hw *hw);
+static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+ u16 count);
+static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count);
+static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+static void ixgbe_release_eeprom(struct ixgbe_hw *hw);
static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw);
-static s32 ixgbe_clear_vfta(struct ixgbe_hw *hw);
-static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw);
+static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index);
+static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index);
static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr);
+static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
/**
- * ixgbe_start_hw - Prepare hardware for TX/RX
+ * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
* @hw: pointer to hardware structure
*
* Starts the hardware by filling the bus info structure and media type, clears
* table, VLAN filter table, calls routine to set up link and flow control
* settings, and leaves transmit and receive units disabled and uninitialized
**/
-s32 ixgbe_start_hw(struct ixgbe_hw *hw)
+s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
{
u32 ctrl_ext;
hw->phy.media_type = hw->mac.ops.get_media_type(hw);
/* Identify the PHY */
- ixgbe_identify_phy(hw);
+ hw->phy.ops.identify(hw);
/*
* Store MAC address from RAR0, clear receive address registers, and
* clear the multicast table
*/
- ixgbe_init_rx_addrs(hw);
+ hw->mac.ops.init_rx_addrs(hw);
/* Clear the VLAN filter table */
- ixgbe_clear_vfta(hw);
+ hw->mac.ops.clear_vfta(hw);
/* Set up link */
hw->mac.ops.setup_link(hw);
/* Clear statistics registers */
- ixgbe_clear_hw_cntrs(hw);
+ hw->mac.ops.clear_hw_cntrs(hw);
/* Set No Snoop Disable */
ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
}
/**
- * ixgbe_init_hw - Generic hardware initialization
+ * ixgbe_init_hw_generic - Generic hardware initialization
* @hw: pointer to hardware structure
*
- * Initialize the hardware by reseting the hardware, filling the bus info
+ * Initialize the hardware by resetting the hardware, filling the bus info
* structure and media type, clears all on chip counters, initializes receive
* address registers, multicast table, VLAN filter table, calls routine to set
* up link and flow control settings, and leaves transmit and receive units
* disabled and uninitialized
**/
-s32 ixgbe_init_hw(struct ixgbe_hw *hw)
+s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
{
/* Reset the hardware */
- hw->mac.ops.reset(hw);
+ hw->mac.ops.reset_hw(hw);
/* Start the HW */
- ixgbe_start_hw(hw);
+ hw->mac.ops.start_hw(hw);
return 0;
}
/**
- * ixgbe_clear_hw_cntrs - Generic clear hardware counters
+ * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters
* @hw: pointer to hardware structure
*
* Clears all hardware statistics counters by reading them from the hardware
* Statistics counters are clear on read.
**/
-static s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
+s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
{
u16 i = 0;
}
/**
- * ixgbe_get_mac_addr - Generic get MAC address
+ * ixgbe_read_pba_num_generic - Reads part number from EEPROM
+ * @hw: pointer to hardware structure
+ * @pba_num: stores the part number from the EEPROM
+ *
+ * Reads the part number from the EEPROM.
+ **/
+s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num)
+{
+ s32 ret_val;
+ u16 data;
+
+ ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ return ret_val;
+ }
+ *pba_num = (u32)(data << 16);
+
+ ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ return ret_val;
+ }
+ *pba_num |= data;
+
+ return 0;
+}
+
+/**
+ * ixgbe_get_mac_addr_generic - Generic get MAC address
* @hw: pointer to hardware structure
* @mac_addr: Adapter MAC address
*
* A reset of the adapter must be performed prior to calling this function
* in order for the MAC address to have been loaded from the EEPROM into RAR0
**/
-s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
+s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr)
{
u32 rar_high;
u32 rar_low;
return 0;
}
-s32 ixgbe_read_part_num(struct ixgbe_hw *hw, u32 *part_num)
-{
- s32 ret_val;
- u16 data;
-
- ret_val = ixgbe_read_eeprom(hw, IXGBE_PBANUM0_PTR, &data);
- if (ret_val) {
- hw_dbg(hw, "NVM Read Error\n");
- return ret_val;
- }
- *part_num = (u32)(data << 16);
-
- ret_val = ixgbe_read_eeprom(hw, IXGBE_PBANUM1_PTR, &data);
- if (ret_val) {
- hw_dbg(hw, "NVM Read Error\n");
- return ret_val;
- }
- *part_num |= data;
-
- return 0;
-}
-
/**
- * ixgbe_stop_adapter - Generic stop TX/RX units
+ * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units
* @hw: pointer to hardware structure
*
* Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
* the shared code and drivers to determine if the adapter is in a stopped
* state and should not touch the hardware.
**/
-s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
+s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
{
u32 number_of_queues;
u32 reg_val;
reg_val = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
reg_val &= ~(IXGBE_RXCTRL_RXEN);
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_val);
+ IXGBE_WRITE_FLUSH(hw);
msleep(2);
/* Clear interrupt mask to stop from interrupts being generated */
IXGBE_READ_REG(hw, IXGBE_EICR);
/* Disable the transmit unit. Each queue must be disabled. */
- number_of_queues = hw->mac.num_tx_queues;
+ number_of_queues = hw->mac.max_tx_queues;
for (i = 0; i < number_of_queues; i++) {
reg_val = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
if (reg_val & IXGBE_TXDCTL_ENABLE) {
}
}
+ /*
+ * Prevent the PCI-E bus from from hanging by disabling PCI-E master
+ * access and verify no pending requests
+ */
+ if (ixgbe_disable_pcie_master(hw) != 0)
+ hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+
return 0;
}
/**
- * ixgbe_led_on - Turns on the software controllable LEDs.
+ * ixgbe_led_on_generic - Turns on the software controllable LEDs.
* @hw: pointer to hardware structure
* @index: led number to turn on
**/
-s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
+s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index)
{
u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
}
/**
- * ixgbe_led_off - Turns off the software controllable LEDs.
+ * ixgbe_led_off_generic - Turns off the software controllable LEDs.
* @hw: pointer to hardware structure
* @index: led number to turn off
**/
-s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
+s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index)
{
u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
return 0;
}
-
/**
- * ixgbe_init_eeprom - Initialize EEPROM params
+ * ixgbe_init_eeprom_params_generic - Initialize EEPROM params
* @hw: pointer to hardware structure
*
* Initializes the EEPROM parameters ixgbe_eeprom_info within the
* ixgbe_hw struct in order to set up EEPROM access.
**/
-s32 ixgbe_init_eeprom(struct ixgbe_hw *hw)
+s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
{
struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
u32 eec;
if (eeprom->type == ixgbe_eeprom_uninitialized) {
eeprom->type = ixgbe_eeprom_none;
+ /* Set default semaphore delay to 10ms which is a well
+ * tested value */
+ eeprom->semaphore_delay = 10;
/*
* Check for EEPROM present first.
}
/**
- * ixgbe_read_eeprom - Read EEPROM word using EERD
+ * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @data: read 16 bit value from EEPROM
+ *
+ * Reads 16 bit value from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 *data)
+{
+ s32 status;
+ u16 word_in;
+ u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ /* Prepare the EEPROM for reading */
+ status = ixgbe_acquire_eeprom(hw);
+
+ if (status == 0) {
+ if (ixgbe_ready_eeprom(hw) != 0) {
+ ixgbe_release_eeprom(hw);
+ status = IXGBE_ERR_EEPROM;
+ }
+ }
+
+ if (status == 0) {
+ ixgbe_standby_eeprom(hw);
+
+ /*
+ * Some SPI eeproms use the 8th address bit embedded in the
+ * opcode
+ */
+ if ((hw->eeprom.address_bits == 8) && (offset >= 128))
+ read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+ /* Send the READ command (opcode + addr) */
+ ixgbe_shift_out_eeprom_bits(hw, read_opcode,
+ IXGBE_EEPROM_OPCODE_BITS);
+ ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2),
+ hw->eeprom.address_bits);
+
+ /* Read the data. */
+ word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
+ *data = (word_in >> 8) | (word_in << 8);
+
+ /* End this read operation */
+ ixgbe_release_eeprom(hw);
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eeprom_generic - Read EEPROM word using EERD
* @hw: pointer to hardware structure
* @offset: offset of word in the EEPROM to read
* @data: word read from the EEPROM
*
* Reads a 16 bit word from the EEPROM using the EERD register.
**/
-s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
+s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
{
u32 eerd;
s32 status;
+ hw->eeprom.ops.init_params(hw);
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
eerd = (offset << IXGBE_EEPROM_READ_ADDR_SHIFT) +
IXGBE_EEPROM_READ_REG_START;
else
hw_dbg(hw, "Eeprom read timed out\n");
+out:
return status;
}
return status;
}
+/**
+ * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ *
+ * Prepares EEPROM for access using bit-bang method. This function should
+ * be called before issuing a command to the EEPROM.
+ **/
+static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ u32 eec;
+ u32 i;
+
+ if (ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0)
+ status = IXGBE_ERR_SWFW_SYNC;
+
+ if (status == 0) {
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ /* Request EEPROM Access */
+ eec |= IXGBE_EEC_REQ;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+
+ for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) {
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ if (eec & IXGBE_EEC_GNT)
+ break;
+ udelay(5);
+ }
+
+ /* Release if grant not acquired */
+ if (!(eec & IXGBE_EEC_GNT)) {
+ eec &= ~IXGBE_EEC_REQ;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ hw_dbg(hw, "Could not acquire EEPROM grant\n");
+
+ ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ status = IXGBE_ERR_EEPROM;
+ }
+ }
+
+ /* Setup EEPROM for Read/Write */
+ if (status == 0) {
+ /* Clear CS and SK */
+ eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+ }
+ return status;
+}
+
/**
* ixgbe_get_eeprom_semaphore - Get hardware semaphore
* @hw: pointer to hardware structure
IXGBE_WRITE_FLUSH(hw);
}
+/**
+ * ixgbe_ready_eeprom - Polls for EEPROM ready
+ * @hw: pointer to hardware structure
+ **/
+static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ u16 i;
+ u8 spi_stat_reg;
+
+ /*
+ * Read "Status Register" repeatedly until the LSB is cleared. The
+ * EEPROM will signal that the command has been completed by clearing
+ * bit 0 of the internal status register. If it's not cleared within
+ * 5 milliseconds, then error out.
+ */
+ for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) {
+ ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI,
+ IXGBE_EEPROM_OPCODE_BITS);
+ spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8);
+ if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ ixgbe_standby_eeprom(hw);
+ };
+
+ /*
+ * On some parts, SPI write time could vary from 0-20mSec on 3.3V
+ * devices (and only 0-5mSec on 5V devices)
+ */
+ if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) {
+ hw_dbg(hw, "SPI EEPROM Status error\n");
+ status = IXGBE_ERR_EEPROM;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state
+ * @hw: pointer to hardware structure
+ **/
+static void ixgbe_standby_eeprom(struct ixgbe_hw *hw)
+{
+ u32 eec;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ /* Toggle CS to flush commands */
+ eec |= IXGBE_EEC_CS;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+ eec &= ~IXGBE_EEC_CS;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+}
+
+/**
+ * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM.
+ * @hw: pointer to hardware structure
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ **/
+static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+ u16 count)
+{
+ u32 eec;
+ u32 mask;
+ u32 i;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ /*
+ * Mask is used to shift "count" bits of "data" out to the EEPROM
+ * one bit at a time. Determine the starting bit based on count
+ */
+ mask = 0x01 << (count - 1);
+
+ for (i = 0; i < count; i++) {
+ /*
+ * A "1" is shifted out to the EEPROM by setting bit "DI" to a
+ * "1", and then raising and then lowering the clock (the SK
+ * bit controls the clock input to the EEPROM). A "0" is
+ * shifted out to the EEPROM by setting "DI" to "0" and then
+ * raising and then lowering the clock.
+ */
+ if (data & mask)
+ eec |= IXGBE_EEC_DI;
+ else
+ eec &= ~IXGBE_EEC_DI;
+
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+
+ udelay(1);
+
+ ixgbe_raise_eeprom_clk(hw, &eec);
+ ixgbe_lower_eeprom_clk(hw, &eec);
+
+ /*
+ * Shift mask to signify next bit of data to shift in to the
+ * EEPROM
+ */
+ mask = mask >> 1;
+ };
+
+ /* We leave the "DI" bit set to "0" when we leave this routine. */
+ eec &= ~IXGBE_EEC_DI;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
+ * @hw: pointer to hardware structure
+ **/
+static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
+{
+ u32 eec;
+ u32 i;
+ u16 data = 0;
+
+ /*
+ * In order to read a register from the EEPROM, we need to shift
+ * 'count' bits in from the EEPROM. Bits are "shifted in" by raising
+ * the clock input to the EEPROM (setting the SK bit), and then reading
+ * the value of the "DO" bit. During this "shifting in" process the
+ * "DI" bit should always be clear.
+ */
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI);
+
+ for (i = 0; i < count; i++) {
+ data = data << 1;
+ ixgbe_raise_eeprom_clk(hw, &eec);
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ eec &= ~(IXGBE_EEC_DI);
+ if (eec & IXGBE_EEC_DO)
+ data |= 1;
+
+ ixgbe_lower_eeprom_clk(hw, &eec);
+ }
+
+ return data;
+}
+
+/**
+ * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input.
+ * @hw: pointer to hardware structure
+ * @eec: EEC register's current value
+ **/
+static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+ /*
+ * Raise the clock input to the EEPROM
+ * (setting the SK bit), then delay
+ */
+ *eec = *eec | IXGBE_EEC_SK;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+}
+
+/**
+ * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
+ * @hw: pointer to hardware structure
+ * @eecd: EECD's current value
+ **/
+static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+ /*
+ * Lower the clock input to the EEPROM (clearing the SK bit), then
+ * delay
+ */
+ *eec = *eec & ~IXGBE_EEC_SK;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+}
+
+/**
+ * ixgbe_release_eeprom - Release EEPROM, release semaphores
+ * @hw: pointer to hardware structure
+ **/
+static void ixgbe_release_eeprom(struct ixgbe_hw *hw)
+{
+ u32 eec;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ eec |= IXGBE_EEC_CS; /* Pull CS high */
+ eec &= ~IXGBE_EEC_SK; /* Lower SCK */
+
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+
+ udelay(1);
+
+ /* Stop requesting EEPROM access */
+ eec &= ~IXGBE_EEC_REQ;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+
+ ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+}
+
/**
* ixgbe_calc_eeprom_checksum - Calculates and returns the checksum
* @hw: pointer to hardware structure
/* Include 0x0-0x3F in the checksum */
for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
- if (ixgbe_read_eeprom(hw, i, &word) != 0) {
+ if (hw->eeprom.ops.read(hw, i, &word) != 0) {
hw_dbg(hw, "EEPROM read failed\n");
break;
}
/* Include all data from pointers except for the fw pointer */
for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
- ixgbe_read_eeprom(hw, i, &pointer);
+ hw->eeprom.ops.read(hw, i, &pointer);
/* Make sure the pointer seems valid */
if (pointer != 0xFFFF && pointer != 0) {
- ixgbe_read_eeprom(hw, pointer, &length);
+ hw->eeprom.ops.read(hw, pointer, &length);
if (length != 0xFFFF && length != 0) {
for (j = pointer+1; j <= pointer+length; j++) {
- ixgbe_read_eeprom(hw, j, &word);
+ hw->eeprom.ops.read(hw, j, &word);
checksum += word;
}
}
}
/**
- * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum
+ * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum
* @hw: pointer to hardware structure
* @checksum_val: calculated checksum
*
* Performs checksum calculation and validates the EEPROM checksum. If the
* caller does not need checksum_val, the value can be NULL.
**/
-s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
+s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
+ u16 *checksum_val)
{
s32 status;
u16 checksum;
* not continue or we could be in for a very long wait while every
* EEPROM read fails
*/
- status = ixgbe_read_eeprom(hw, 0, &checksum);
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
if (status == 0) {
checksum = ixgbe_calc_eeprom_checksum(hw);
- ixgbe_read_eeprom(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
+ hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
/*
* Verify read checksum from EEPROM is the same as
return status;
}
+/**
+ * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u16 checksum;
+
+ /*
+ * Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+
+ if (status == 0) {
+ checksum = ixgbe_calc_eeprom_checksum(hw);
+ status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM,
+ checksum);
+ } else {
+ hw_dbg(hw, "EEPROM read failed\n");
+ }
+
+ return status;
+}
+
/**
* ixgbe_validate_mac_addr - Validate MAC address
* @mac_addr: pointer to MAC address.
status = IXGBE_ERR_INVALID_MAC_ADDR;
/* Reject the zero address */
else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
- mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0)
+ mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0)
status = IXGBE_ERR_INVALID_MAC_ADDR;
return status;
}
/**
- * ixgbe_set_rar - Set RX address register
+ * ixgbe_set_rar_generic - Set Rx address register
* @hw: pointer to hardware structure
- * @addr: Address to put into receive address register
* @index: Receive address register to write
- * @vind: Vind to set RAR to
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq "set" or "pool" index
* @enable_addr: set flag that address is active
*
* Puts an ethernet address into a receive address register.
**/
-s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind,
- u32 enable_addr)
+s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr)
{
u32 rar_low, rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ /* setup VMDq pool selection before this RAR gets enabled */
+ hw->mac.ops.set_vmdq(hw, index, vmdq);
+ /* Make sure we are using a valid rar index range */
+ if (index < rar_entries) {
/*
- * HW expects these in little endian so we reverse the byte order from
- * network order (big endian) to little endian
+ * HW expects these in little endian so we reverse the byte
+ * order from network order (big endian) to little endian
*/
rar_low = ((u32)addr[0] |
((u32)addr[1] << 8) |
((u32)addr[2] << 16) |
((u32)addr[3] << 24));
-
- rar_high = ((u32)addr[4] |
- ((u32)addr[5] << 8) |
- ((vind << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK));
+ /*
+ * Some parts put the VMDq setting in the extra RAH bits,
+ * so save everything except the lower 16 bits that hold part
+ * of the address and the address valid bit.
+ */
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+ rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+ rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8));
if (enable_addr != 0)
rar_high |= IXGBE_RAH_AV;
IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+ } else {
+ hw_dbg(hw, "RAR index %d is out of range.\n", index);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_clear_rar_generic - Remove Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ *
+ * Clears an ethernet address from a receive address register.
+ **/
+s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index)
+{
+ u32 rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ /* Make sure we are using a valid rar index range */
+ if (index < rar_entries) {
+ /*
+ * Some parts put the VMDq setting in the extra RAH bits,
+ * so save everything except the lower 16 bits that hold part
+ * of the address and the address valid bit.
+ */
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+ rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+
+ IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+ } else {
+ hw_dbg(hw, "RAR index %d is out of range.\n", index);
+ }
+
+ /* clear VMDq pool/queue selection for this RAR */
+ hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL);
return 0;
}
/**
- * ixgbe_init_rx_addrs - Initializes receive address filters.
+ * ixgbe_enable_rar - Enable Rx address register
+ * @hw: pointer to hardware structure
+ * @index: index into the RAR table
+ *
+ * Enables the select receive address register.
+ **/
+static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index)
+{
+ u32 rar_high;
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+ rar_high |= IXGBE_RAH_AV;
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+}
+
+/**
+ * ixgbe_disable_rar - Disable Rx address register
+ * @hw: pointer to hardware structure
+ * @index: index into the RAR table
+ *
+ * Disables the select receive address register.
+ **/
+static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index)
+{
+ u32 rar_high;
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+ rar_high &= (~IXGBE_RAH_AV);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+}
+
+/**
+ * ixgbe_init_rx_addrs_generic - Initializes receive address filters.
* @hw: pointer to hardware structure
*
* Places the MAC address in receive address register 0 and clears the rest
- * of the receive addresss registers. Clears the multicast table. Assumes
+ * of the receive address registers. Clears the multicast table. Assumes
* the receiver is in reset when the routine is called.
**/
-static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
+s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
{
u32 i;
u32 rar_entries = hw->mac.num_rar_entries;
if (ixgbe_validate_mac_addr(hw->mac.addr) ==
IXGBE_ERR_INVALID_MAC_ADDR) {
/* Get the MAC address from the RAR0 for later reference */
- ixgbe_get_mac_addr(hw, hw->mac.addr);
+ hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
hw_dbg(hw, " Keeping Current RAR0 Addr =%.2X %.2X %.2X ",
hw->mac.addr[0], hw->mac.addr[1],
hw_dbg(hw, "%.2X %.2X %.2X\n", hw->mac.addr[3],
hw->mac.addr[4], hw->mac.addr[5]);
- ixgbe_set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+ hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
}
+ hw->addr_ctrl.overflow_promisc = 0;
hw->addr_ctrl.rar_used_count = 1;
/* Zero out the other receive addresses. */
- hw_dbg(hw, "Clearing RAR[1-15]\n");
+ hw_dbg(hw, "Clearing RAR[1-%d]\n", rar_entries - 1);
for (i = 1; i < rar_entries; i++) {
IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
for (i = 0; i < hw->mac.mcft_size; i++)
IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
+ if (hw->mac.ops.init_uta_tables)
+ hw->mac.ops.init_uta_tables(hw);
+
return 0;
}
*
* Adds it to unused receive address register or goes into promiscuous mode.
**/
-void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr)
+static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq)
{
u32 rar_entries = hw->mac.num_rar_entries;
u32 rar;
if (hw->addr_ctrl.rar_used_count < rar_entries) {
rar = hw->addr_ctrl.rar_used_count -
hw->addr_ctrl.mc_addr_in_rar_count;
- ixgbe_set_rar(hw, rar, addr, 0, IXGBE_RAH_AV);
+ hw->mac.ops.set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV);
hw_dbg(hw, "Added a secondary address to RAR[%d]\n", rar);
hw->addr_ctrl.rar_used_count++;
} else {
}
/**
- * ixgbe_update_uc_addr_list - Updates MAC list of secondary addresses
+ * ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
* @hw: pointer to hardware structure
* @addr_list: the list of new addresses
* @addr_count: number of addresses
* Drivers using secondary unicast addresses must set user_set_promisc when
* manually putting the device into promiscuous mode.
**/
-s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
+s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
u32 addr_count, ixgbe_mc_addr_itr next)
{
u8 *addr;
for (i = 0; i < addr_count; i++) {
hw_dbg(hw, " Adding the secondary addresses:\n");
addr = next(hw, &addr_list, &vmdq);
- ixgbe_add_uc_addr(hw, addr);
+ ixgbe_add_uc_addr(hw, addr, vmdq);
}
if (hw->addr_ctrl.overflow_promisc) {
}
}
- hw_dbg(hw, "ixgbe_update_uc_addr_list Complete\n");
+ hw_dbg(hw, "ixgbe_update_uc_addr_list_generic Complete\n");
return 0;
}
* bit-vector to set in the multicast table. The hardware uses 12 bits, from
* incoming rx multicast addresses, to determine the bit-vector to check in
* the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
- * by the MO field of the MCSTCTRL. The MO field is set during initalization
+ * by the MO field of the MCSTCTRL. The MO field is set during initialization
* to mc_filter_type.
**/
static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
* else put it in the MTA
*/
if (hw->addr_ctrl.rar_used_count < rar_entries) {
+ /* use RAR from the end up for multicast */
rar = rar_entries - hw->addr_ctrl.mc_addr_in_rar_count - 1;
- ixgbe_set_rar(hw, rar, mc_addr, 0, IXGBE_RAH_AV);
- hw_dbg(hw, "Added a multicast address to RAR[%d]\n",
- hw->addr_ctrl.rar_used_count);
+ hw->mac.ops.set_rar(hw, rar, mc_addr, 0, IXGBE_RAH_AV);
+ hw_dbg(hw, "Added a multicast address to RAR[%d]\n", rar);
hw->addr_ctrl.rar_used_count++;
hw->addr_ctrl.mc_addr_in_rar_count++;
} else {
}
/**
- * ixgbe_update_mc_addr_list - Updates MAC list of multicast addresses
+ * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
* @hw: pointer to hardware structure
* @mc_addr_list: the list of new multicast addresses
* @mc_addr_count: number of addresses
* @next: iterator function to walk the multicast address list
*
* The given list replaces any existing list. Clears the MC addrs from receive
- * address registers and the multicast table. Uses unsed receive address
+ * address registers and the multicast table. Uses unused receive address
* registers for the first multicast addresses, and hashes the rest into the
* multicast table.
**/
-s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
u32 mc_addr_count, ixgbe_mc_addr_itr next)
{
u32 i;
hw->addr_ctrl.mta_in_use = 0;
/* Zero out the other receive addresses. */
- hw_dbg(hw, "Clearing RAR[1-15]\n");
+ hw_dbg(hw, "Clearing RAR[%d-%d]\n", hw->addr_ctrl.rar_used_count,
+ rar_entries - 1);
for (i = hw->addr_ctrl.rar_used_count; i < rar_entries; i++) {
IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL,
IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type);
- hw_dbg(hw, "ixgbe_update_mc_addr_list Complete\n");
+ hw_dbg(hw, "ixgbe_update_mc_addr_list_generic Complete\n");
return 0;
}
/**
- * ixgbe_clear_vfta - Clear VLAN filter table
+ * ixgbe_enable_mc_generic - Enable multicast address in RAR
* @hw: pointer to hardware structure
*
- * Clears the VLAN filer table, and the VMDq index associated with the filter
+ * Enables multicast address in RAR and the use of the multicast hash table.
**/
-static s32 ixgbe_clear_vfta(struct ixgbe_hw *hw)
+s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw)
{
- u32 offset;
- u32 vlanbyte;
+ u32 i;
+ u32 rar_entries = hw->mac.num_rar_entries;
+ struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
- for (offset = 0; offset < hw->mac.vft_size; offset++)
- IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+ if (a->mc_addr_in_rar_count > 0)
+ for (i = (rar_entries - a->mc_addr_in_rar_count);
+ i < rar_entries; i++)
+ ixgbe_enable_rar(hw, i);
- for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
- for (offset = 0; offset < hw->mac.vft_size; offset++)
- IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
- 0);
+ if (a->mta_in_use > 0)
+ IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE |
+ hw->mac.mc_filter_type);
return 0;
}
/**
- * ixgbe_set_vfta - Set VLAN filter table
+ * ixgbe_disable_mc_generic - Disable multicast address in RAR
* @hw: pointer to hardware structure
- * @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VFTA
- * @vlan_on: boolean flag to turn on/off VLAN in VFTA
*
- * Turn on/off specified VLAN in the VLAN filter table.
+ * Disables multicast address in RAR and the use of the multicast hash table.
**/
-s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind,
- bool vlan_on)
+s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
{
- u32 VftaIndex;
- u32 BitOffset;
- u32 VftaReg;
- u32 VftaByte;
-
- /* Determine 32-bit word position in array */
- VftaIndex = (vlan >> 5) & 0x7F; /* upper seven bits */
-
- /* Determine the location of the (VMD) queue index */
- VftaByte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
- BitOffset = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */
-
- /* Set the nibble for VMD queue index */
- VftaReg = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(VftaByte, VftaIndex));
- VftaReg &= (~(0x0F << BitOffset));
- VftaReg |= (vind << BitOffset);
- IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(VftaByte, VftaIndex), VftaReg);
-
- /* Determine the location of the bit for this VLAN id */
- BitOffset = vlan & 0x1F; /* lower five bits */
-
- VftaReg = IXGBE_READ_REG(hw, IXGBE_VFTA(VftaIndex));
- if (vlan_on)
- /* Turn on this VLAN id */
- VftaReg |= (1 << BitOffset);
- else
- /* Turn off this VLAN id */
- VftaReg &= ~(1 << BitOffset);
- IXGBE_WRITE_REG(hw, IXGBE_VFTA(VftaIndex), VftaReg);
-
- return 0;
-}
-
-/**
- * ixgbe_setup_fc - Configure flow control settings
- * @hw: pointer to hardware structure
- * @packetbuf_num: packet buffer number (0-7)
- *
- * Configures the flow control settings based on SW configuration.
- * This function is used for 802.3x flow control configuration only.
- **/
-s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
-{
- u32 frctl_reg;
- u32 rmcs_reg;
-
- if (packetbuf_num < 0 || packetbuf_num > 7)
- hw_dbg(hw, "Invalid packet buffer number [%d], expected range "
- "is 0-7\n", packetbuf_num);
-
- frctl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
- frctl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
-
- rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
- rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
-
- /*
- * 10 gig parts do not have a word in the EEPROM to determine the
- * default flow control setting, so we explicitly set it to full.
- */
- if (hw->fc.type == ixgbe_fc_default)
- hw->fc.type = ixgbe_fc_full;
-
- /*
- * We want to save off the original Flow Control configuration just in
- * case we get disconnected and then reconnected into a different hub
- * or switch with different Flow Control capabilities.
- */
- hw->fc.type = hw->fc.original_type;
-
- /*
- * The possible values of the "flow_control" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames but not
- * send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames but we do not
- * support receiving pause frames)
- * 3: Both Rx and TX flow control (symmetric) are enabled.
- * other: Invalid.
- */
- switch (hw->fc.type) {
- case ixgbe_fc_none:
- break;
- case ixgbe_fc_rx_pause:
- /*
- * RX Flow control is enabled,
- * and TX Flow control is disabled.
- */
- frctl_reg |= IXGBE_FCTRL_RFCE;
- break;
- case ixgbe_fc_tx_pause:
- /*
- * TX Flow control is enabled, and RX Flow control is disabled,
- * by a software over-ride.
- */
- rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
- break;
- case ixgbe_fc_full:
- /*
- * Flow control (both RX and TX) is enabled by a software
- * over-ride.
- */
- frctl_reg |= IXGBE_FCTRL_RFCE;
- rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
- break;
- default:
- /* We should never get here. The value should be 0-3. */
- hw_dbg(hw, "Flow control param set incorrectly\n");
- break;
- }
-
- /* Enable 802.3x based flow control settings. */
- IXGBE_WRITE_REG(hw, IXGBE_FCTRL, frctl_reg);
- IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
-
- /*
- * Check for invalid software configuration, zeros are completely
- * invalid for all parameters used past this point, and if we enable
- * flow control with zero water marks, we blast flow control packets.
- */
- if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) {
- hw_dbg(hw, "Flow control structure initialized incorrectly\n");
- return IXGBE_ERR_INVALID_LINK_SETTINGS;
- }
+ u32 i;
+ u32 rar_entries = hw->mac.num_rar_entries;
+ struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
- /*
- * We need to set up the Receive Threshold high and low water
- * marks as well as (optionally) enabling the transmission of
- * XON frames.
- */
- if (hw->fc.type & ixgbe_fc_tx_pause) {
- if (hw->fc.send_xon) {
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
- (hw->fc.low_water | IXGBE_FCRTL_XONE));
- } else {
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
- hw->fc.low_water);
- }
- IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num),
- (hw->fc.high_water)|IXGBE_FCRTH_FCEN);
- }
+ if (a->mc_addr_in_rar_count > 0)
+ for (i = (rar_entries - a->mc_addr_in_rar_count);
+ i < rar_entries; i++)
+ ixgbe_disable_rar(hw, i);
- IXGBE_WRITE_REG(hw, IXGBE_FCTTV(0), hw->fc.pause_time);
- IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
+ if (a->mta_in_use > 0)
+ IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
return 0;
}
**/
s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
{
- u32 ctrl;
- s32 i;
+ u32 i;
+ u32 reg_val;
+ u32 number_of_queues;
s32 status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
- ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- ctrl |= IXGBE_CTRL_GIO_DIS;
- IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+ /* Disable the receive unit by stopping each queue */
+ number_of_queues = hw->mac.max_rx_queues;
+ for (i = 0; i < number_of_queues; i++) {
+ reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
+ if (reg_val & IXGBE_RXDCTL_ENABLE) {
+ reg_val &= ~IXGBE_RXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val);
+ }
+ }
+
+ reg_val = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ reg_val |= IXGBE_CTRL_GIO_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, reg_val);
for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) {
/**
- * ixgbe_acquire_swfw_sync - Aquire SWFW semaphore
+ * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
* @hw: pointer to hardware structure
- * @mask: Mask to specify wich semaphore to acquire
+ * @mask: Mask to specify which semaphore to acquire
*
- * Aquires the SWFW semaphore throught the GSSR register for the specified
+ * Acquires the SWFW semaphore thought the GSSR register for the specified
* function (CSR, PHY0, PHY1, EEPROM, Flash)
**/
s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
/**
* ixgbe_release_swfw_sync - Release SWFW semaphore
* @hw: pointer to hardware structure
- * @mask: Mask to specify wich semaphore to release
+ * @mask: Mask to specify which semaphore to release
*
- * Releases the SWFW semaphore throught the GSSR register for the specified
+ * Releases the SWFW semaphore thought the GSSR register for the specified
* function (CSR, PHY0, PHY1, EEPROM, Flash)
**/
void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask)
ixgbe_release_eeprom_semaphore(hw);
}
-/**
- * ixgbe_read_analog_reg8 - Reads 8 bit Atlas analog register
- * @hw: pointer to hardware structure
- * @reg: analog register to read
- * @val: read value
- *
- * Performs write operation to analog register specified.
- **/
-s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val)
-{
- u32 atlas_ctl;
-
- IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
- IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
- IXGBE_WRITE_FLUSH(hw);
- udelay(10);
- atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
- *val = (u8)atlas_ctl;
-
- return 0;
-}
-
-/**
- * ixgbe_write_analog_reg8 - Writes 8 bit Atlas analog register
- * @hw: pointer to hardware structure
- * @reg: atlas register to write
- * @val: value to write
- *
- * Performs write operation to Atlas analog register specified.
- **/
-s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val)
-{
- u32 atlas_ctl;
-
- atlas_ctl = (reg << 8) | val;
- IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
- IXGBE_WRITE_FLUSH(hw);
- udelay(10);
-
- return 0;
-}
-
#include "ixgbe_type.h"
-s32 ixgbe_init_hw(struct ixgbe_hw *hw);
-s32 ixgbe_start_hw(struct ixgbe_hw *hw);
-s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr);
-s32 ixgbe_stop_adapter(struct ixgbe_hw *hw);
-s32 ixgbe_read_part_num(struct ixgbe_hw *hw, u32 *part_num);
-
-s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index);
-s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index);
-
-s32 ixgbe_init_eeprom(struct ixgbe_hw *hw);
-s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data);
-s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val);
-
-s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind,
- u32 enable_addr);
-s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
- u32 mc_addr_count, ixgbe_mc_addr_itr next);
-s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *uc_addr_list,
- u32 mc_addr_count, ixgbe_mc_addr_itr next);
-s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on);
-s32 ixgbe_validate_mac_addr(u8 *mac_addr);
-
-s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packtetbuf_num);
+s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw);
+s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw);
+s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num);
+s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr);
+s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw);
+s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw);
+
+s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
+
+s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
+s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 *data);
+s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
+ u16 *checksum_val);
+s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw);
+
+s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr);
+s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw);
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count,
+ ixgbe_mc_addr_itr func);
+s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
+ u32 addr_count, ixgbe_mc_addr_itr func);
+s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
+s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
+s32 ixgbe_validate_mac_addr(u8 *mac_addr);
s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask);
void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask);
s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw);
-s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val);
-s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val);
+s32 ixgbe_read_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 *val);
+s32 ixgbe_write_analog_reg8_generic(struct ixgbe_hw *hw, u32 reg, u8 val);
#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
ecmd->advertising = (ADVERTISED_10000baseT_Full |
ADVERTISED_FIBRE);
ecmd->port = PORT_FIBRE;
+ ecmd->autoneg = AUTONEG_DISABLE;
}
- adapter->hw.mac.ops.check_link(hw, &(link_speed), &link_up, false);
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
if (link_up) {
ecmd->speed = (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
SPEED_10000 : SPEED_1000;
regs_buff[25] = IXGBE_READ_REG(hw, IXGBE_IVAR(0));
regs_buff[26] = IXGBE_READ_REG(hw, IXGBE_MSIXT);
regs_buff[27] = IXGBE_READ_REG(hw, IXGBE_MSIXPBA);
- regs_buff[28] = IXGBE_READ_REG(hw, IXGBE_PBACL);
+ regs_buff[28] = IXGBE_READ_REG(hw, IXGBE_PBACL(0));
regs_buff[29] = IXGBE_READ_REG(hw, IXGBE_GPIE);
/* Flow Control */
regs_buff[482 + i] = IXGBE_READ_REG(hw, IXGBE_RAL(i));
for (i = 0; i < 16; i++)
regs_buff[498 + i] = IXGBE_READ_REG(hw, IXGBE_RAH(i));
- regs_buff[514] = IXGBE_READ_REG(hw, IXGBE_PSRTYPE);
+ regs_buff[514] = IXGBE_READ_REG(hw, IXGBE_PSRTYPE(0));
regs_buff[515] = IXGBE_READ_REG(hw, IXGBE_FCTRL);
regs_buff[516] = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
regs_buff[517] = IXGBE_READ_REG(hw, IXGBE_MCSTCTRL);
return -ENOMEM;
for (i = 0; i < eeprom_len; i++) {
- if ((ret_val = ixgbe_read_eeprom(hw, first_word + i,
- &eeprom_buff[i])))
+ if ((ret_val = hw->eeprom.ops.read(hw, first_word + i,
+ &eeprom_buff[i])))
break;
}
u8 *data)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
- u8 *p = data;
+ char *p = (char *)data;
int i;
switch (stringset) {
static int ixgbe_phys_id(struct net_device *netdev, u32 data)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
- u32 led_reg = IXGBE_READ_REG(&adapter->hw, IXGBE_LEDCTL);
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
u32 i;
if (!data || data > 300)
data = 300;
for (i = 0; i < (data * 1000); i += 400) {
- ixgbe_led_on(&adapter->hw, IXGBE_LED_ON);
+ hw->mac.ops.led_on(hw, IXGBE_LED_ON);
msleep_interruptible(200);
- ixgbe_led_off(&adapter->hw, IXGBE_LED_ON);
+ hw->mac.ops.led_off(hw, IXGBE_LED_ON);
msleep_interruptible(200);
}
static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
/* add VID to filter table */
- ixgbe_set_vfta(&adapter->hw, vid, 0, true);
+ hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true);
}
static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_disable(adapter);
ixgbe_irq_enable(adapter);
/* remove VID from filter table */
- ixgbe_set_vfta(&adapter->hw, vid, 0, false);
+ hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false);
}
static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
addr_count = netdev->uc_count;
if (addr_count)
addr_list = netdev->uc_list->dmi_addr;
- ixgbe_update_uc_addr_list(hw, addr_list, addr_count,
- ixgbe_addr_list_itr);
+ hw->mac.ops.update_uc_addr_list(hw, addr_list, addr_count,
+ ixgbe_addr_list_itr);
/* reprogram multicast list */
addr_count = netdev->mc_count;
if (addr_count)
addr_list = netdev->mc_list->dmi_addr;
- ixgbe_update_mc_addr_list(hw, addr_list, addr_count,
- ixgbe_addr_list_itr);
+ hw->mac.ops.update_mc_addr_list(hw, addr_list, addr_count,
+ ixgbe_addr_list_itr);
}
static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
void ixgbe_reset(struct ixgbe_adapter *adapter)
{
- if (ixgbe_init_hw(&adapter->hw))
- DPRINTK(PROBE, ERR, "Hardware Error\n");
+ struct ixgbe_hw *hw = &adapter->hw;
+ if (hw->mac.ops.init_hw(hw))
+ dev_err(&adapter->pdev->dev, "Hardware Error\n");
/* reprogram the RAR[0] in case user changed it. */
- ixgbe_set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV);
+ hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
}
struct pci_dev *pdev = adapter->pdev;
unsigned int rss;
+ /* PCI config space info */
+
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->revision_id = pdev->revision;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_device_id = pdev->subsystem_device;
+
/* Set capability flags */
rss = min(IXGBE_MAX_RSS_INDICES, (int)num_online_cpus());
adapter->ring_feature[RING_F_RSS].indices = rss;
/* select 10G link by default */
hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN;
- if (hw->mac.ops.reset(hw)) {
- dev_err(&pdev->dev, "HW Init failed\n");
- return -EIO;
- }
- if (hw->mac.ops.setup_link_speed(hw, IXGBE_LINK_SPEED_10GB_FULL, true,
- false)) {
- dev_err(&pdev->dev, "Link Speed setup failed\n");
- return -EIO;
- }
/* enable itr by default in dynamic mode */
adapter->itr_setting = 1;
adapter->rx_ring_count = IXGBE_DEFAULT_RXD;
/* initialize eeprom parameters */
- if (ixgbe_init_eeprom(hw)) {
+ if (ixgbe_init_eeprom_params_generic(hw)) {
dev_err(&pdev->dev, "EEPROM initialization failed\n");
return -EIO;
}
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
- ixgbe_set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV);
+ adapter->hw.mac.ops.set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV);
return 0;
}
}
#endif
+/**
+ * ixgbe_link_config - set up initial link with default speed and duplex
+ * @hw: pointer to private hardware struct
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ixgbe_link_config(struct ixgbe_hw *hw)
+{
+ u32 autoneg = IXGBE_LINK_SPEED_10GB_FULL;
+
+ /* must always autoneg for both 1G and 10G link */
+ hw->mac.autoneg = true;
+
+ return hw->mac.ops.setup_link_speed(hw, autoneg, true, true);
+}
+
/**
* ixgbe_napi_add_all - prep napi structs for use
* @adapter: private struct
static int cards_found;
int i, err, pci_using_dac;
u16 link_status, link_speed, link_width;
- u32 part_num;
+ u32 part_num, eec;
err = pci_enable_device(pdev);
if (err)
if (err) {
err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
- dev_err(&pdev->dev, "No usable DMA "
- "configuration, aborting\n");
+ dev_err(&pdev->dev, "No usable DMA configuration, "
+ "aborting\n");
goto err_dma;
}
}
adapter->bd_number = cards_found;
- /* PCI config space info */
- hw->vendor_id = pdev->vendor;
- hw->device_id = pdev->device;
- hw->revision_id = pdev->revision;
- hw->subsystem_vendor_id = pdev->subsystem_vendor;
- hw->subsystem_device_id = pdev->subsystem_device;
-
/* Setup hw api */
memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops));
hw->mac.type = ii->mac;
+ /* EEPROM */
+ memcpy(&hw->eeprom.ops, ii->eeprom_ops, sizeof(hw->eeprom.ops));
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ /* If EEPROM is valid (bit 8 = 1), use default otherwise use bit bang */
+ if (!(eec & (1 << 8)))
+ hw->eeprom.ops.read = &ixgbe_read_eeprom_bit_bang_generic;
+
+ /* PHY */
+ memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops));
+ /* phy->sfp_type = ixgbe_sfp_type_unknown; */
+
err = ii->get_invariants(hw);
if (err)
goto err_hw_init;
if (err)
goto err_sw_init;
+ /* reset_hw fills in the perm_addr as well */
+ err = hw->mac.ops.reset_hw(hw);
+ if (err) {
+ dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err);
+ goto err_sw_init;
+ }
+
netdev->features = NETIF_F_SG |
NETIF_F_IP_CSUM |
NETIF_F_HW_VLAN_TX |
netdev->features |= NETIF_F_HIGHDMA;
/* make sure the EEPROM is good */
- if (ixgbe_validate_eeprom_checksum(hw, NULL) < 0) {
+ if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) {
dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n");
err = -EIO;
goto err_eeprom;
memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len);
memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len);
- if (ixgbe_validate_mac_addr(netdev->dev_addr)) {
+ if (ixgbe_validate_mac_addr(netdev->perm_addr)) {
+ dev_err(&pdev->dev, "invalid MAC address\n");
err = -EIO;
goto err_eeprom;
}
"Unknown"),
netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]);
- ixgbe_read_part_num(hw, &part_num);
+ ixgbe_read_pba_num_generic(hw, &part_num);
dev_info(&pdev->dev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
hw->mac.type, hw->phy.type,
(part_num >> 8), (part_num & 0xff));
}
/* reset the hardware with the new settings */
- ixgbe_start_hw(hw);
+ hw->mac.ops.start_hw(hw);
+
+ /* link_config depends on start_hw being called at least once */
+ err = ixgbe_link_config(hw);
+ if (err) {
+ dev_err(&pdev->dev, "setup_link_speed FAILED %d\n", err);
+ goto err_register;
+ }
netif_carrier_off(netdev);
netif_tx_stop_all_queues(netdev);
#include "ixgbe_common.h"
#include "ixgbe_phy.h"
+static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
-static bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
-static s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
- u32 device_type, u16 phy_data);
/**
- * ixgbe_identify_phy - Get physical layer module
+ * ixgbe_identify_phy_generic - Get physical layer module
* @hw: pointer to hardware structure
*
* Determines the physical layer module found on the current adapter.
**/
-s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
{
s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
u32 phy_addr;
- for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
- if (ixgbe_validate_phy_addr(hw, phy_addr)) {
- hw->phy.addr = phy_addr;
- ixgbe_get_phy_id(hw);
- hw->phy.type = ixgbe_get_phy_type_from_id(hw->phy.id);
- status = 0;
- break;
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+ if (ixgbe_validate_phy_addr(hw, phy_addr)) {
+ hw->phy.addr = phy_addr;
+ ixgbe_get_phy_id(hw);
+ hw->phy.type =
+ ixgbe_get_phy_type_from_id(hw->phy.id);
+ status = 0;
+ break;
+ }
}
+ } else {
+ status = 0;
}
+
return status;
}
bool valid = false;
hw->phy.addr = phy_addr;
- ixgbe_read_phy_reg(hw,
- IXGBE_MDIO_PHY_ID_HIGH,
- IXGBE_MDIO_PMA_PMD_DEV_TYPE,
- &phy_id);
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &phy_id);
if (phy_id != 0xFFFF && phy_id != 0x0)
valid = true;
u16 phy_id_high = 0;
u16 phy_id_low = 0;
- status = ixgbe_read_phy_reg(hw,
- IXGBE_MDIO_PHY_ID_HIGH,
- IXGBE_MDIO_PMA_PMD_DEV_TYPE,
- &phy_id_high);
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_HIGH,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &phy_id_high);
if (status == 0) {
hw->phy.id = (u32)(phy_id_high << 16);
- status = ixgbe_read_phy_reg(hw,
- IXGBE_MDIO_PHY_ID_LOW,
- IXGBE_MDIO_PMA_PMD_DEV_TYPE,
- &phy_id_low);
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_ID_LOW,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &phy_id_low);
hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
}
-
return status;
}
enum ixgbe_phy_type phy_type;
switch (phy_id) {
- case TN1010_PHY_ID:
- phy_type = ixgbe_phy_tn;
- break;
case QT2022_PHY_ID:
phy_type = ixgbe_phy_qt;
break;
}
/**
- * ixgbe_reset_phy - Performs a PHY reset
+ * ixgbe_reset_phy_generic - Performs a PHY reset
* @hw: pointer to hardware structure
**/
-s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
{
/*
* Perform soft PHY reset to the PHY_XS.
* This will cause a soft reset to the PHY
*/
- return ixgbe_write_phy_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
- IXGBE_MDIO_PHY_XS_DEV_TYPE,
- IXGBE_MDIO_PHY_XS_RESET);
+ return hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+ IXGBE_MDIO_PHY_XS_DEV_TYPE,
+ IXGBE_MDIO_PHY_XS_RESET);
}
/**
- * ixgbe_read_phy_reg - Reads a value from a specified PHY register
+ * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
* @hw: pointer to hardware structure
* @reg_addr: 32 bit address of PHY register to read
* @phy_data: Pointer to read data from PHY register
**/
-s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
- u32 device_type, u16 *phy_data)
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data)
{
u32 command;
u32 i;
- u32 timeout = 10;
u32 data;
s32 status = 0;
u16 gssr;
if (status == 0) {
/* Setup and write the address cycle command */
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
* The MDI Command bit will clear when the operation is
* complete
*/
- for (i = 0; i < timeout; i++) {
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
udelay(10);
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
* command
*/
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
* completed. The MDI Command bit will clear when the
* operation is complete
*/
- for (i = 0; i < timeout; i++) {
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
udelay(10);
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
}
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
- hw_dbg(hw,
- "PHY read command didn't complete\n");
+ hw_dbg(hw, "PHY read command didn't complete\n");
status = IXGBE_ERR_PHY;
} else {
/*
ixgbe_release_swfw_sync(hw, gssr);
}
+
return status;
}
/**
- * ixgbe_write_phy_reg - Writes a value to specified PHY register
+ * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
* @hw: pointer to hardware structure
* @reg_addr: 32 bit PHY register to write
* @device_type: 5 bit device type
* @phy_data: Data to write to the PHY register
**/
-static s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
- u32 device_type, u16 phy_data)
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data)
{
u32 command;
u32 i;
- u32 timeout = 10;
s32 status = 0;
u16 gssr;
/* Setup and write the address cycle command */
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
* The MDI Command bit will clear when the operation is
* complete
*/
- for (i = 0; i < timeout; i++) {
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
udelay(10);
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
- if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
- hw_dbg(hw, "PHY address cmd didn't complete\n");
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
break;
- }
}
- if ((command & IXGBE_MSCA_MDI_COMMAND) != 0)
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ hw_dbg(hw, "PHY address cmd didn't complete\n");
status = IXGBE_ERR_PHY;
+ }
if (status == 0) {
/*
* command
*/
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
* completed. The MDI Command bit will clear when the
* operation is complete
*/
- for (i = 0; i < timeout; i++) {
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
udelay(10);
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
- if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
- hw_dbg(hw, "PHY write command did not "
- "complete.\n");
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
break;
- }
}
- if ((command & IXGBE_MSCA_MDI_COMMAND) != 0)
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ hw_dbg(hw, "PHY address cmd didn't complete\n");
status = IXGBE_ERR_PHY;
+ }
}
ixgbe_release_swfw_sync(hw, gssr);
}
/**
- * ixgbe_setup_tnx_phy_link - Set and restart autoneg
+ * ixgbe_setup_phy_link_generic - Set and restart autoneg
* @hw: pointer to hardware structure
*
* Restart autonegotiation and PHY and waits for completion.
**/
-s32 ixgbe_setup_tnx_phy_link(struct ixgbe_hw *hw)
+s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
{
s32 status = IXGBE_NOT_IMPLEMENTED;
u32 time_out;
u32 max_time_out = 10;
- u16 autoneg_speed_selection_register = 0x10;
- u16 autoneg_restart_mask = 0x0200;
- u16 autoneg_complete_mask = 0x0020;
- u16 autoneg_reg = 0;
+ u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
/*
* Set advertisement settings in PHY based on autoneg_advertised
* settings. If autoneg_advertised = 0, then advertise default values
- * txn devices cannot be "forced" to a autoneg 10G and fail. But can
+ * tnx devices cannot be "forced" to a autoneg 10G and fail. But can
* for a 1G.
*/
- ixgbe_read_phy_reg(hw,
- autoneg_speed_selection_register,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
+ hw->phy.ops.read_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */
else
autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */
- ixgbe_write_phy_reg(hw,
- autoneg_speed_selection_register,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- autoneg_reg);
-
+ hw->phy.ops.write_reg(hw, IXGBE_MII_SPEED_SELECTION_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
/* Restart PHY autonegotiation and wait for completion */
- ixgbe_read_phy_reg(hw,
- IXGBE_MDIO_AUTO_NEG_CONTROL,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
- autoneg_reg |= autoneg_restart_mask;
+ autoneg_reg |= IXGBE_MII_RESTART;
- ixgbe_write_phy_reg(hw,
- IXGBE_MDIO_AUTO_NEG_CONTROL,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- autoneg_reg);
+ hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
/* Wait for autonegotiation to finish */
for (time_out = 0; time_out < max_time_out; time_out++) {
udelay(10);
/* Restart PHY autonegotiation and wait for completion */
- status = ixgbe_read_phy_reg(hw,
- IXGBE_MDIO_AUTO_NEG_STATUS,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
- autoneg_reg &= autoneg_complete_mask;
- if (autoneg_reg == autoneg_complete_mask) {
+ autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE;
+ if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE) {
status = 0;
break;
}
}
/**
- * ixgbe_check_tnx_phy_link - Determine link and speed status
- * @hw: pointer to hardware structure
- *
- * Reads the VS1 register to determine if link is up and the current speed for
- * the PHY.
- **/
-s32 ixgbe_check_tnx_phy_link(struct ixgbe_hw *hw, u32 *speed,
- bool *link_up)
-{
- s32 status = 0;
- u32 time_out;
- u32 max_time_out = 10;
- u16 phy_link = 0;
- u16 phy_speed = 0;
- u16 phy_data = 0;
-
- /* Initialize speed and link to default case */
- *link_up = false;
- *speed = IXGBE_LINK_SPEED_10GB_FULL;
-
- /*
- * Check current speed and link status of the PHY register.
- * This is a vendor specific register and may have to
- * be changed for other copper PHYs.
- */
- for (time_out = 0; time_out < max_time_out; time_out++) {
- udelay(10);
- if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
- *link_up = true;
- if (phy_speed ==
- IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
- break;
- } else {
- status = ixgbe_read_phy_reg(hw,
- IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
- IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
- &phy_data);
- phy_link = phy_data &
- IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
- phy_speed = phy_data &
- IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
- }
- }
-
- return status;
-}
-
-/**
- * ixgbe_setup_tnx_phy_link_speed - Sets the auto advertised capabilities
+ * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
* @hw: pointer to hardware structure
* @speed: new link speed
* @autoneg: true if autonegotiation enabled
**/
-s32 ixgbe_setup_tnx_phy_link_speed(struct ixgbe_hw *hw, u32 speed,
- bool autoneg,
- bool autoneg_wait_to_complete)
+s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete)
{
+
/*
* Clear autoneg_advertised and set new values based on input link
* speed.
if (speed & IXGBE_LINK_SPEED_10GB_FULL)
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
if (speed & IXGBE_LINK_SPEED_1GB_FULL)
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
/* Setup link based on the new speed settings */
- ixgbe_setup_tnx_phy_link(hw);
+ hw->phy.ops.setup_link(hw);
return 0;
}
+
#define _IXGBE_PHY_H_
#include "ixgbe_type.h"
+#define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0
-s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw);
-s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, u32 *speed, bool *link_up);
-s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, u32 speed, bool autoneg,
- bool autoneg_wait_to_complete);
-s32 ixgbe_identify_phy(struct ixgbe_hw *hw);
-s32 ixgbe_reset_phy(struct ixgbe_hw *hw);
-s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr,
- u32 device_type, u16 *phy_data);
-
-/* PHY specific */
-s32 ixgbe_setup_tnx_phy_link(struct ixgbe_hw *hw);
-s32 ixgbe_check_tnx_phy_link(struct ixgbe_hw *hw, u32 *speed, bool *link_up);
-s32 ixgbe_setup_tnx_phy_link_speed(struct ixgbe_hw *hw, u32 speed, bool autoneg,
- bool autoneg_wait_to_complete);
+/* EEPROM byte offsets */
+#define IXGBE_SFF_IDENTIFIER 0x0
+#define IXGBE_SFF_IDENTIFIER_SFP 0x3
+#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25
+#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26
+#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27
+#define IXGBE_SFF_1GBE_COMP_CODES 0x6
+#define IXGBE_SFF_10GBE_COMP_CODES 0x3
+#define IXGBE_SFF_TRANSMISSION_MEDIA 0x9
+
+/* Bitmasks */
+#define IXGBE_SFF_TWIN_AX_CAPABLE 0x80
+#define IXGBE_SFF_1GBASESX_CAPABLE 0x1
+#define IXGBE_SFF_10GBASESR_CAPABLE 0x10
+#define IXGBE_SFF_10GBASELR_CAPABLE 0x20
+#define IXGBE_I2C_EEPROM_READ_MASK 0x100
+#define IXGBE_I2C_EEPROM_STATUS_MASK 0x3
+#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0
+#define IXGBE_I2C_EEPROM_STATUS_PASS 0x1
+#define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2
+#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3
+
+/* Bit-shift macros */
+#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 12
+#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 8
+#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 4
+
+/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
+#define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600
+#define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500
+#define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00
+
+
+s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw);
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw);
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw);
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data);
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data);
+s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw);
+s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
#endif /* _IXGBE_PHY_H_ */
/* Device IDs */
#define IXGBE_DEV_ID_82598AF_DUAL_PORT 0x10C6
#define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7
-#define IXGBE_DEV_ID_82598AT_DUAL_PORT 0x10C8
#define IXGBE_DEV_ID_82598EB_CX4 0x10DD
#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC
#define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4
#define IXGBE_EIMC 0x00888
#define IXGBE_EIAC 0x00810
#define IXGBE_EIAM 0x00890
-#define IXGBE_EITR(_i) (0x00820 + ((_i) * 4)) /* 0x820-0x86c */
-#define IXGBE_IVAR(_i) (0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */
+#define IXGBE_EITR(_i) (((_i) <= 23) ? (0x00820 + ((_i) * 4)) : (0x012300 + ((_i) * 4)))
+#define IXGBE_IVAR(_i) (0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */
#define IXGBE_MSIXT 0x00000 /* MSI-X Table. 0x0000 - 0x01C */
#define IXGBE_MSIXPBA 0x02000 /* MSI-X Pending bit array */
-#define IXGBE_PBACL 0x11068
+#define IXGBE_PBACL(_i) (((_i) == 0) ? (0x11068) : (0x110C0 + ((_i) * 4)))
#define IXGBE_GPIE 0x00898
/* Flow Control Registers */
#define IXGBE_TFCS 0x0CE00
/* Receive DMA Registers */
-#define IXGBE_RDBAL(_i) (0x01000 + ((_i) * 0x40)) /* 64 of each (0-63)*/
-#define IXGBE_RDBAH(_i) (0x01004 + ((_i) * 0x40))
-#define IXGBE_RDLEN(_i) (0x01008 + ((_i) * 0x40))
-#define IXGBE_RDH(_i) (0x01010 + ((_i) * 0x40))
-#define IXGBE_RDT(_i) (0x01018 + ((_i) * 0x40))
-#define IXGBE_RXDCTL(_i) (0x01028 + ((_i) * 0x40))
-#define IXGBE_RSCCTL(_i) (0x0102C + ((_i) * 0x40))
-#define IXGBE_SRRCTL(_i) (0x02100 + ((_i) * 4))
- /* array of 16 (0x02100-0x0213C) */
-#define IXGBE_DCA_RXCTRL(_i) (0x02200 + ((_i) * 4))
- /* array of 16 (0x02200-0x0223C) */
-#define IXGBE_RDRXCTL 0x02F00
+#define IXGBE_RDBAL(_i) (((_i) < 64) ? (0x01000 + ((_i) * 0x40)) : (0x0D000 + ((_i - 64) * 0x40)))
+#define IXGBE_RDBAH(_i) (((_i) < 64) ? (0x01004 + ((_i) * 0x40)) : (0x0D004 + ((_i - 64) * 0x40)))
+#define IXGBE_RDLEN(_i) (((_i) < 64) ? (0x01008 + ((_i) * 0x40)) : (0x0D008 + ((_i - 64) * 0x40)))
+#define IXGBE_RDH(_i) (((_i) < 64) ? (0x01010 + ((_i) * 0x40)) : (0x0D010 + ((_i - 64) * 0x40)))
+#define IXGBE_RDT(_i) (((_i) < 64) ? (0x01018 + ((_i) * 0x40)) : (0x0D018 + ((_i - 64) * 0x40)))
+#define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : (0x0D028 + ((_i - 64) * 0x40)))
+/*
+ * Split and Replication Receive Control Registers
+ * 00-15 : 0x02100 + n*4
+ * 16-64 : 0x01014 + n*0x40
+ * 64-127: 0x0D014 + (n-64)*0x40
+ */
+#define IXGBE_SRRCTL(_i) (((_i) <= 15) ? (0x02100 + ((_i) * 4)) : \
+ (((_i) < 64) ? (0x01014 + ((_i) * 0x40)) : \
+ (0x0D014 + ((_i - 64) * 0x40))))
+/*
+ * Rx DCA Control Register:
+ * 00-15 : 0x02200 + n*4
+ * 16-64 : 0x0100C + n*0x40
+ * 64-127: 0x0D00C + (n-64)*0x40
+ */
+#define IXGBE_DCA_RXCTRL(_i) (((_i) <= 15) ? (0x02200 + ((_i) * 4)) : \
+ (((_i) < 64) ? (0x0100C + ((_i) * 0x40)) : \
+ (0x0D00C + ((_i - 64) * 0x40))))
+#define IXGBE_RDRXCTL 0x02F00
#define IXGBE_RXPBSIZE(_i) (0x03C00 + ((_i) * 4))
- /* 8 of these 0x03C00 - 0x03C1C */
+ /* 8 of these 0x03C00 - 0x03C1C */
#define IXGBE_RXCTRL 0x03000
#define IXGBE_DROPEN 0x03D04
#define IXGBE_RXPBSIZE_SHIFT 10
/* Receive Registers */
#define IXGBE_RXCSUM 0x05000
#define IXGBE_RFCTL 0x05008
+#define IXGBE_DRECCCTL 0x02F08
+#define IXGBE_DRECCCTL_DISABLE 0
+/* Multicast Table Array - 128 entries */
#define IXGBE_MTA(_i) (0x05200 + ((_i) * 4))
- /* Multicast Table Array - 128 entries */
-#define IXGBE_RAL(_i) (0x05400 + ((_i) * 8)) /* 16 of these (0-15) */
-#define IXGBE_RAH(_i) (0x05404 + ((_i) * 8)) /* 16 of these (0-15) */
-#define IXGBE_PSRTYPE 0x05480
- /* 0x5480-0x54BC Packet split receive type */
+#define IXGBE_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : (0x0A200 + ((_i) * 8)))
+#define IXGBE_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : (0x0A204 + ((_i) * 8)))
+/* Packet split receive type */
+#define IXGBE_PSRTYPE(_i) (((_i) <= 15) ? (0x05480 + ((_i) * 4)) : (0x0EA00 + ((_i) * 4)))
+/* array of 4096 1-bit vlan filters */
#define IXGBE_VFTA(_i) (0x0A000 + ((_i) * 4))
- /* array of 4096 1-bit vlan filters */
+/*array of 4096 4-bit vlan vmdq indices */
#define IXGBE_VFTAVIND(_j, _i) (0x0A200 + ((_j) * 0x200) + ((_i) * 4))
- /*array of 4096 4-bit vlan vmdq indicies */
#define IXGBE_FCTRL 0x05080
#define IXGBE_VLNCTRL 0x05088
#define IXGBE_MCSTCTRL 0x05090
#define IXGBE_MRQC 0x05818
-#define IXGBE_VMD_CTL 0x0581C
#define IXGBE_IMIR(_i) (0x05A80 + ((_i) * 4)) /* 8 of these (0-7) */
#define IXGBE_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* 8 of these (0-7) */
#define IXGBE_IMIRVP 0x05AC0
+#define IXGBE_VMD_CTL 0x0581C
#define IXGBE_RETA(_i) (0x05C00 + ((_i) * 4)) /* 32 of these (0-31) */
#define IXGBE_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* 10 of these (0-9) */
+
/* Transmit DMA registers */
-#define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40))/* 32 of these (0-31)*/
+#define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40)) /* 32 of these (0-31)*/
#define IXGBE_TDBAH(_i) (0x06004 + ((_i) * 0x40))
#define IXGBE_TDLEN(_i) (0x06008 + ((_i) * 0x40))
#define IXGBE_TDH(_i) (0x06010 + ((_i) * 0x40))
#define IXGBE_TDWBAL(_i) (0x06038 + ((_i) * 0x40))
#define IXGBE_TDWBAH(_i) (0x0603C + ((_i) * 0x40))
#define IXGBE_DTXCTL 0x07E00
-#define IXGBE_DCA_TXCTRL(_i) (0x07200 + ((_i) * 4))
- /* there are 16 of these (0-15) */
+
+#define IXGBE_DCA_TXCTRL(_i) (0x07200 + ((_i) * 4)) /* 16 of these (0-15) */
#define IXGBE_TIPG 0x0CB00
-#define IXGBE_TXPBSIZE(_i) (0x0CC00 + ((_i) *0x04))
- /* there are 8 of these */
+#define IXGBE_TXPBSIZE(_i) (0x0CC00 + ((_i) * 4)) /* 8 of these */
#define IXGBE_MNGTXMAP 0x0CD10
#define IXGBE_TIPG_FIBER_DEFAULT 3
#define IXGBE_TXPBSIZE_SHIFT 10
#define IXGBE_IPAV 0x05838
#define IXGBE_IP4AT 0x05840 /* IPv4 table 0x5840-0x5858 */
#define IXGBE_IP6AT 0x05880 /* IPv6 table 0x5880-0x588F */
+
#define IXGBE_WUPL 0x05900
#define IXGBE_WUPM 0x05A00 /* wake up pkt memory 0x5A00-0x5A7C */
#define IXGBE_FHFT 0x09000 /* Flex host filter table 9000-93FC */
#define IXGBE_TDPT2TCCR(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */
#define IXGBE_TDPT2TCSR(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
+
+
/* Stats registers */
#define IXGBE_CRCERRS 0x04000
#define IXGBE_ILLERRC 0x04004
#define IXGBE_XEC 0x04120
#define IXGBE_RQSMR(_i) (0x02300 + ((_i) * 4)) /* 16 of these */
-#define IXGBE_TQSMR(_i) (0x07300 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_TQSMR(_i) (((_i) <= 7) ? (0x07300 + ((_i) * 4)) : (0x08600 + ((_i) * 4)))
#define IXGBE_QPRC(_i) (0x01030 + ((_i) * 0x40)) /* 16 of these */
#define IXGBE_QPTC(_i) (0x06030 + ((_i) * 0x40)) /* 16 of these */
#define IXGBE_DCA_CTRL 0x11074
/* Diagnostic Registers */
-#define IXGBE_RDSTATCTL 0x02C20
-#define IXGBE_RDSTAT(_i) (0x02C00 + ((_i) * 4)) /* 0x02C00-0x02C1C */
-#define IXGBE_RDHMPN 0x02F08
+#define IXGBE_RDSTATCTL 0x02C20
+#define IXGBE_RDSTAT(_i) (0x02C00 + ((_i) * 4)) /* 0x02C00-0x02C1C */
+#define IXGBE_RDHMPN 0x02F08
#define IXGBE_RIC_DW(_i) (0x02F10 + ((_i) * 4))
-#define IXGBE_RDPROBE 0x02F20
-#define IXGBE_TDSTATCTL 0x07C20
-#define IXGBE_TDSTAT(_i) (0x07C00 + ((_i) * 4)) /* 0x07C00 - 0x07C1C */
-#define IXGBE_TDHMPN 0x07F08
+#define IXGBE_RDPROBE 0x02F20
+#define IXGBE_TDSTATCTL 0x07C20
+#define IXGBE_TDSTAT(_i) (0x07C00 + ((_i) * 4)) /* 0x07C00 - 0x07C1C */
+#define IXGBE_TDHMPN 0x07F08
#define IXGBE_TIC_DW(_i) (0x07F10 + ((_i) * 4))
-#define IXGBE_TDPROBE 0x07F20
-#define IXGBE_TXBUFCTRL 0x0C600
+#define IXGBE_TDPROBE 0x07F20
+#define IXGBE_TXBUFCTRL 0x0C600
#define IXGBE_TXBUFDATA0 0x0C610
#define IXGBE_TXBUFDATA1 0x0C614
#define IXGBE_TXBUFDATA2 0x0C618
#define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
#define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
-#define IXGBE_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* TX Desc writeback RO bit */
+#define IXGBE_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
#define IXGBE_DCA_MAX_QUEUES_82598 16 /* DCA regs only on 16 queues */
/* MSCA Bit Masks */
#define IXGBE_MSCA_MDI_IN_PROG_EN 0x80000000 /* MDI in progress enable */
/* MSRWD bit masks */
-#define IXGBE_MSRWD_WRITE_DATA_MASK 0x0000FFFF
-#define IXGBE_MSRWD_WRITE_DATA_SHIFT 0
-#define IXGBE_MSRWD_READ_DATA_MASK 0xFFFF0000
-#define IXGBE_MSRWD_READ_DATA_SHIFT 16
+#define IXGBE_MSRWD_WRITE_DATA_MASK 0x0000FFFF
+#define IXGBE_MSRWD_WRITE_DATA_SHIFT 0
+#define IXGBE_MSRWD_READ_DATA_MASK 0xFFFF0000
+#define IXGBE_MSRWD_READ_DATA_SHIFT 16
/* Atlas registers */
#define IXGBE_ATLAS_PDN_LPBK 0x24
#define IXGBE_ATLAS_PDN_TX_1G_QL_ALL 0xF0
#define IXGBE_ATLAS_PDN_TX_AN_QL_ALL 0xF0
+
/* Device Type definitions for new protocol MDIO commands */
#define IXGBE_MDIO_PMA_PMD_DEV_TYPE 0x1
#define IXGBE_MDIO_PCS_DEV_TYPE 0x3
#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE 0x7
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE 0x1E /* Device 30 */
+#define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */
+
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL 0x0 /* VS1 Control Reg */
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS 0x1 /* VS1 Status Reg */
#define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS 0x0008 /* 1 = Link Up */
#define IXGBE_MDIO_PHY_XS_RESET 0x8000 /* PHY_XS Reset */
#define IXGBE_MDIO_PHY_ID_HIGH 0x2 /* PHY ID High Reg*/
#define IXGBE_MDIO_PHY_ID_LOW 0x3 /* PHY ID Low Reg*/
-#define IXGBE_MDIO_PHY_SPEED_ABILITY 0x4 /* Speed Abilty Reg */
+#define IXGBE_MDIO_PHY_SPEED_ABILITY 0x4 /* Speed Ability Reg */
#define IXGBE_MDIO_PHY_SPEED_10G 0x0001 /* 10G capable */
#define IXGBE_MDIO_PHY_SPEED_1G 0x0010 /* 1G capable */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Address Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Status Reg */
+
+/* MII clause 22/28 definitions */
+#define IXGBE_MDIO_PHY_LOW_POWER_MODE 0x0800
+
+#define IXGBE_MII_SPEED_SELECTION_REG 0x10
+#define IXGBE_MII_RESTART 0x200
+#define IXGBE_MII_AUTONEG_COMPLETE 0x20
+#define IXGBE_MII_AUTONEG_REG 0x0
+
#define IXGBE_PHY_REVISION_MASK 0xFFFFFFF0
#define IXGBE_MAX_PHY_ADDR 32
/* PHY IDs*/
-#define TN1010_PHY_ID 0x00A19410
#define QT2022_PHY_ID 0x0043A400
+/* PHY Types */
+#define IXGBE_M88E1145_E_PHY_ID 0x01410CD0
+
/* General purpose Interrupt Enable */
-#define IXGBE_GPIE_MSIX_MODE 0x00000010 /* MSI-X mode */
-#define IXGBE_GPIE_OCD 0x00000020 /* Other Clear Disable */
-#define IXGBE_GPIE_EIMEN 0x00000040 /* Immediate Interrupt Enable */
-#define IXGBE_GPIE_EIAME 0x40000000
-#define IXGBE_GPIE_PBA_SUPPORT 0x80000000
+#define IXGBE_SDP0_GPIEN 0x00000001 /* SDP0 */
+#define IXGBE_SDP1_GPIEN 0x00000002 /* SDP1 */
+#define IXGBE_GPIE_MSIX_MODE 0x00000010 /* MSI-X mode */
+#define IXGBE_GPIE_OCD 0x00000020 /* Other Clear Disable */
+#define IXGBE_GPIE_EIMEN 0x00000040 /* Immediate Interrupt Enable */
+#define IXGBE_GPIE_EIAME 0x40000000
+#define IXGBE_GPIE_PBA_SUPPORT 0x80000000
/* Transmit Flow Control status */
#define IXGBE_TFCS_TXOFF 0x00000001
#define IXGBE_PAP_TXPAUSECNT_MASK 0x0000FFFF /* Pause counter mask */
/* RMCS Bit Masks */
-#define IXGBE_RMCS_RRM 0x00000002 /* Receive Recylce Mode enable */
+#define IXGBE_RMCS_RRM 0x00000002 /* Receive Recycle Mode enable */
/* Receive Arbitration Control: 0 Round Robin, 1 DFP */
#define IXGBE_RMCS_RAC 0x00000004
#define IXGBE_RMCS_DFP IXGBE_RMCS_RAC /* Deficit Fixed Priority ena */
#define IXGBE_RMCS_TFCE_PRIORITY 0x00000010 /* Tx Priority flow control ena */
#define IXGBE_RMCS_ARBDIS 0x00000040 /* Arbitration disable bit */
+
/* Interrupt register bitmasks */
/* Extended Interrupt Cause Read */
#define IXGBE_EICR_RTX_QUEUE 0x0000FFFF /* RTx Queue Interrupt */
#define IXGBE_EICR_LSC 0x00100000 /* Link Status Change */
-#define IXGBE_EICR_MNG 0x00400000 /* Managability Event Interrupt */
+#define IXGBE_EICR_MNG 0x00400000 /* Manageability Event Interrupt */
+#define IXGBE_EICR_GPI_SDP0 0x01000000 /* Gen Purpose Interrupt on SDP0 */
+#define IXGBE_EICR_GPI_SDP1 0x02000000 /* Gen Purpose Interrupt on SDP1 */
#define IXGBE_EICR_PBUR 0x10000000 /* Packet Buffer Handler Error */
#define IXGBE_EICR_DHER 0x20000000 /* Descriptor Handler Error */
#define IXGBE_EICR_TCP_TIMER 0x40000000 /* TCP Timer */
/* Extended Interrupt Cause Set */
#define IXGBE_EICS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
-#define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */
-#define IXGBE_EICR_GPI_SDP0 0x01000000 /* Gen Purpose Interrupt on SDP0 */
-#define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
-#define IXGBE_EICS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Error */
-#define IXGBE_EICS_DHER IXGBE_EICR_DHER /* Desc Handler Error */
+#define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */
+#define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
+#define IXGBE_EICS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
+#define IXGBE_EICS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EICS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
+#define IXGBE_EICS_DHER IXGBE_EICR_DHER /* Desc Handler Error */
#define IXGBE_EICS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
#define IXGBE_EICS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
#define IXGBE_EIMS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
#define IXGBE_EIMS_LSC IXGBE_EICR_LSC /* Link Status Change */
#define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
-#define IXGBE_EIMS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Error */
+#define IXGBE_EIMS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
+#define IXGBE_EIMS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EIMS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
#define IXGBE_EIMS_DHER IXGBE_EICR_DHER /* Descr Handler Error */
#define IXGBE_EIMS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
#define IXGBE_EIMS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
#define IXGBE_EIMC_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
#define IXGBE_EIMC_LSC IXGBE_EICR_LSC /* Link Status Change */
#define IXGBE_EIMC_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
-#define IXGBE_EIMC_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Error */
-#define IXGBE_EIMC_DHER IXGBE_EICR_DHER /* Desc Handler Error */
+#define IXGBE_EIMC_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
+#define IXGBE_EIMC_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EIMC_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
+#define IXGBE_EIMC_DHER IXGBE_EICR_DHER /* Desc Handler Err */
#define IXGBE_EIMC_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
#define IXGBE_EIMC_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
-#define IXGBE_EIMS_ENABLE_MASK (\
- IXGBE_EIMS_RTX_QUEUE | \
- IXGBE_EIMS_LSC | \
- IXGBE_EIMS_TCP_TIMER | \
- IXGBE_EIMS_OTHER)
+#define IXGBE_EIMS_ENABLE_MASK ( \
+ IXGBE_EIMS_RTX_QUEUE | \
+ IXGBE_EIMS_LSC | \
+ IXGBE_EIMS_TCP_TIMER | \
+ IXGBE_EIMS_OTHER)
-/* Immediate Interrupt RX (A.K.A. Low Latency Interrupt) */
+/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
#define IXGBE_IMIR_PORT_IM_EN 0x00010000 /* TCP port enable */
#define IXGBE_IMIR_PORT_BP 0x00020000 /* TCP port check bypass */
#define IXGBE_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */
#define IXGBE_VLNCTRL_VFE 0x40000000 /* bit 30 */
#define IXGBE_VLNCTRL_VME 0x80000000 /* bit 31 */
+
#define IXGBE_ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.1q protocol */
/* STATUS Bit Masks */
#define IXGBE_AUTOC_AN_RESTART 0x00001000
#define IXGBE_AUTOC_FLU 0x00000001
#define IXGBE_AUTOC_LMS_SHIFT 13
-#define IXGBE_AUTOC_LMS_MASK (0x7 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_1G_LINK_NO_AN (0x0 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_10G_LINK_NO_AN (0x1 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_1G_AN (0x2 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_KX4_AN (0x4 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_KX4_AN_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_ATTACH_TYPE (0x7 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
-
-#define IXGBE_AUTOC_1G_PMA_PMD 0x00000200
-#define IXGBE_AUTOC_10G_PMA_PMD 0x00000180
+#define IXGBE_AUTOC_LMS_MASK (0x7 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_1G_LINK_NO_AN (0x0 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_10G_LINK_NO_AN (0x1 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_1G_AN (0x2 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_AN (0x4 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_AN_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_ATTACH_TYPE (0x7 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+
+#define IXGBE_AUTOC_1G_PMA_PMD 0x00000200
+#define IXGBE_AUTOC_10G_PMA_PMD 0x00000180
#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT 7
#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT 9
#define IXGBE_AUTOC_10G_XAUI (0x0 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
#define IXGBE_PBANUM0_PTR 0x15
#define IXGBE_PBANUM1_PTR 0x16
+/* Legacy EEPROM word offsets */
+#define IXGBE_ISCSI_BOOT_CAPS 0x0033
+#define IXGBE_ISCSI_SETUP_PORT_0 0x0030
+#define IXGBE_ISCSI_SETUP_PORT_1 0x0034
+
/* EEPROM Commands - SPI */
#define IXGBE_EEPROM_MAX_RETRY_SPI 5000 /* Max wait 5ms for RDY signal */
#define IXGBE_EEPROM_STATUS_RDY_SPI 0x01
#define IXGBE_EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
#define IXGBE_EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = addr bit-8 */
#define IXGBE_EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Ena latch */
-/* EEPROM reset Write Enbale latch */
+/* EEPROM reset Write Enable latch */
#define IXGBE_EEPROM_WRDI_OPCODE_SPI 0x04
#define IXGBE_EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status reg */
#define IXGBE_EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status reg */
/* Number of 100 microseconds we wait for PCI Express master disable */
#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800
-/* PHY Types */
-#define IXGBE_M88E1145_E_PHY_ID 0x01410CD0
-
/* Check whether address is multicast. This is little-endian specific check.*/
#define IXGBE_IS_MULTICAST(Address) \
- (bool)(((u8 *)(Address))[0] & ((u8)0x01))
+ (bool)(((u8 *)(Address))[0] & ((u8)0x01))
/* Check whether an address is broadcast. */
#define IXGBE_IS_BROADCAST(Address) \
- ((((u8 *)(Address))[0] == ((u8)0xff)) && \
- (((u8 *)(Address))[1] == ((u8)0xff)))
+ ((((u8 *)(Address))[0] == ((u8)0xff)) && \
+ (((u8 *)(Address))[1] == ((u8)0xff)))
/* RAH */
#define IXGBE_RAH_VIND_MASK 0x003C0000
#define IXGBE_RAH_VIND_SHIFT 18
#define IXGBE_RAH_AV 0x80000000
+#define IXGBE_CLEAR_VMDQ_ALL 0xFFFFFFFF
/* Header split receive */
#define IXGBE_RFCTL_ISCSI_DIS 0x00000001
#define IXGBE_MAX_FRAME_SZ 0x40040000
#define IXGBE_TDWBAL_HEAD_WB_ENABLE 0x1 /* Tx head write-back enable */
-#define IXGBE_TDWBAL_SEQNUM_WB_ENABLE 0x2 /* Tx seq. # write-back enable */
+#define IXGBE_TDWBAL_SEQNUM_WB_ENABLE 0x2 /* Tx seq# write-back enable */
/* Receive Config masks */
#define IXGBE_RXCTRL_RXEN 0x00000001 /* Enable Receiver */
#define IXGBE_FCTRL_BAM 0x00000400 /* Broadcast Accept Mode */
#define IXGBE_FCTRL_PMCF 0x00001000 /* Pass MAC Control Frames */
#define IXGBE_FCTRL_DPF 0x00002000 /* Discard Pause Frame */
-/* Receive Priority Flow Control Enbale */
+/* Receive Priority Flow Control Enable */
#define IXGBE_FCTRL_RPFCE 0x00004000
#define IXGBE_FCTRL_RFCE 0x00008000 /* Receive Flow Control Ena */
/* Receive Descriptor bit definitions */
#define IXGBE_RXD_STAT_DD 0x01 /* Descriptor Done */
#define IXGBE_RXD_STAT_EOP 0x02 /* End of Packet */
-#define IXGBE_RXD_STAT_IXSM 0x04 /* Ignore checksum */
#define IXGBE_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
-#define IXGBE_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */
+#define IXGBE_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
#define IXGBE_RXD_STAT_L4CS 0x20 /* L4 xsum calculated */
#define IXGBE_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
#define IXGBE_RXD_STAT_PIF 0x80 /* passed in-exact filter */
#define IXGBE_RXD_ERR_USE 0x20 /* Undersize Error */
#define IXGBE_RXD_ERR_TCPE 0x40 /* TCP/UDP Checksum Error */
#define IXGBE_RXD_ERR_IPE 0x80 /* IP Checksum Error */
-#define IXGBE_RXDADV_HBO 0x00800000
+#define IXGBE_RXDADV_ERR_HBO 0x00800000 /*Header Buffer Overflow */
#define IXGBE_RXDADV_ERR_CE 0x01000000 /* CRC Error */
#define IXGBE_RXDADV_ERR_LE 0x02000000 /* Length Error */
#define IXGBE_RXDADV_ERR_PE 0x08000000 /* Packet Error */
#define IXGBE_RXD_CFI_MASK 0x1000 /* CFI is bit 12 */
#define IXGBE_RXD_CFI_SHIFT 12
+
/* SRRCTL bit definitions */
-#define IXGBE_SRRCTL_BSIZEPKT_SHIFT 10 /* so many KBs */
-#define IXGBE_SRRCTL_BSIZEPKT_MASK 0x0000007F
-#define IXGBE_SRRCTL_BSIZEHDR_MASK 0x00003F00
-#define IXGBE_SRRCTL_DESCTYPE_LEGACY 0x00000000
+#define IXGBE_SRRCTL_BSIZEPKT_SHIFT 10 /* so many KBs */
+#define IXGBE_SRRCTL_BSIZEPKT_MASK 0x0000007F
+#define IXGBE_SRRCTL_BSIZEHDR_MASK 0x00003F00
+#define IXGBE_SRRCTL_DESCTYPE_LEGACY 0x00000000
#define IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000
#define IXGBE_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define IXGBE_SRRCTL_DESCTYPE_MASK 0x0E000000
#define IXGBE_RXDPS_HDRSTAT_HDRSP 0x00008000
#define IXGBE_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
#define IXGBE_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */
#define IXGBE_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */
#define IXGBE_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */
-
/* Masks to determine if packets should be dropped due to frame errors */
-#define IXGBE_RXD_ERR_FRAME_ERR_MASK (\
- IXGBE_RXD_ERR_CE | \
- IXGBE_RXD_ERR_LE | \
- IXGBE_RXD_ERR_PE | \
- IXGBE_RXD_ERR_OSE | \
- IXGBE_RXD_ERR_USE)
-
-#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK (\
- IXGBE_RXDADV_ERR_CE | \
- IXGBE_RXDADV_ERR_LE | \
- IXGBE_RXDADV_ERR_PE | \
- IXGBE_RXDADV_ERR_OSE | \
- IXGBE_RXDADV_ERR_USE)
+#define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \
+ IXGBE_RXD_ERR_CE | \
+ IXGBE_RXD_ERR_LE | \
+ IXGBE_RXD_ERR_PE | \
+ IXGBE_RXD_ERR_OSE | \
+ IXGBE_RXD_ERR_USE)
+
+#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK ( \
+ IXGBE_RXDADV_ERR_CE | \
+ IXGBE_RXDADV_ERR_LE | \
+ IXGBE_RXDADV_ERR_PE | \
+ IXGBE_RXDADV_ERR_OSE | \
+ IXGBE_RXDADV_ERR_USE)
/* Multicast bit mask */
#define IXGBE_MCSTCTRL_MFE 0x4
#define IXGBE_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority in upper 3 of 16 */
#define IXGBE_TX_DESC_SPECIAL_PRI_SHIFT IXGBE_RX_DESC_SPECIAL_PRI_SHIFT
+
/* Transmit Descriptor - Legacy */
struct ixgbe_legacy_tx_desc {
u64 buffer_addr; /* Address of the descriptor's data buffer */
union {
__le32 data;
struct {
- u8 status; /* Descriptor status */
- u8 css; /* Checksum start */
+ u8 status; /* Descriptor status */
+ u8 css; /* Checksum start */
__le16 vlan;
} fields;
} upper;
/* Transmit Descriptor - Advanced */
union ixgbe_adv_tx_desc {
struct {
- __le64 buffer_addr; /* Address of descriptor's data buf */
+ __le64 buffer_addr; /* Address of descriptor's data buf */
__le32 cmd_type_len;
__le32 olinfo_status;
} read;
union {
__le32 data;
struct {
- __le16 pkt_info; /* RSS type, Packet type */
- __le16 hdr_info; /* Split Header, header len */
+ __le16 pkt_info; /* RSS, Pkt type */
+ __le16 hdr_info; /* Splithdr, hdrlen */
} hs_rss;
} lo_dword;
union {
};
/* Adv Transmit Descriptor Config Masks */
-#define IXGBE_ADVTXD_DTALEN_MASK 0x0000FFFF /* Data buffer length(bytes) */
+#define IXGBE_ADVTXD_DTALEN_MASK 0x0000FFFF /* Data buf length(bytes) */
#define IXGBE_ADVTXD_DTYP_MASK 0x00F00000 /* DTYP mask */
#define IXGBE_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Desc */
#define IXGBE_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
#define IXGBE_ADVTXD_DCMD_EOP IXGBE_TXD_CMD_EOP /* End of Packet */
#define IXGBE_ADVTXD_DCMD_IFCS IXGBE_TXD_CMD_IFCS /* Insert FCS */
-#define IXGBE_ADVTXD_DCMD_RDMA 0x04000000 /* RDMA */
#define IXGBE_ADVTXD_DCMD_RS IXGBE_TXD_CMD_RS /* Report Status */
-#define IXGBE_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */
+#define IXGBE_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */
#define IXGBE_ADVTXD_DCMD_DEXT IXGBE_TXD_CMD_DEXT /* Desc ext (1=Adv) */
#define IXGBE_ADVTXD_DCMD_VLE IXGBE_TXD_CMD_VLE /* VLAN pkt enable */
#define IXGBE_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
#define IXGBE_ADVTXD_STAT_DD IXGBE_TXD_STAT_DD /* Descriptor Done */
-#define IXGBE_ADVTXD_STAT_SN_CRC 0x00000002 /* NXTSEQ/SEED present in WB */
+#define IXGBE_ADVTXD_STAT_SN_CRC 0x00000002 /* NXTSEQ/SEED pres in WB */
#define IXGBE_ADVTXD_STAT_RSV 0x0000000C /* STA Reserved */
#define IXGBE_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */
+#define IXGBE_ADVTXD_CC 0x00000080 /* Check Context */
#define IXGBE_ADVTXD_POPTS_SHIFT 8 /* Adv desc POPTS shift */
#define IXGBE_ADVTXD_POPTS_IXSM (IXGBE_TXD_POPTS_IXSM << \
- IXGBE_ADVTXD_POPTS_SHIFT)
+ IXGBE_ADVTXD_POPTS_SHIFT)
#define IXGBE_ADVTXD_POPTS_TXSM (IXGBE_TXD_POPTS_TXSM << \
- IXGBE_ADVTXD_POPTS_SHIFT)
-#define IXGBE_ADVTXD_POPTS_EOM 0x00000400 /* Enable L bit-RDMA DDP hdr */
-#define IXGBE_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */
-#define IXGBE_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */
-#define IXGBE_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */
-#define IXGBE_ADVTXD_POPTS_ISCO_FULL 0x00001800 /* 1st&Last TSO-full iSCSI PDU*/
-#define IXGBE_ADVTXD_POPTS_RSV 0x00002000 /* POPTS Reserved */
-#define IXGBE_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
-#define IXGBE_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
-#define IXGBE_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */
-#define IXGBE_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
-#define IXGBE_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */
-#define IXGBE_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */
-#define IXGBE_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
-#define IXGBE_ADVTXD_TUCMD_MKRREQ 0x00002000 /* Req requires Markers and CRC */
-#define IXGBE_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
-#define IXGBE_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
-
+ IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_FULL 0x00001800 /* 1st&Last TSO-full iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_RSV 0x00002000 /* POPTS Reserved */
+#define IXGBE_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
+#define IXGBE_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
+#define IXGBE_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */
+#define IXGBE_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
+#define IXGBE_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */
+#define IXGBE_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */
+#define IXGBE_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
+#define IXGBE_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */
+#define IXGBE_ADVTXD_TUCMD_MKRREQ 0x00002000 /*Req requires Markers and CRC*/
+#define IXGBE_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
+#define IXGBE_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
+
+/* Autonegotiation advertised speeds */
+typedef u32 ixgbe_autoneg_advertised;
/* Link speed */
+typedef u32 ixgbe_link_speed;
#define IXGBE_LINK_SPEED_UNKNOWN 0
#define IXGBE_LINK_SPEED_100_FULL 0x0008
#define IXGBE_LINK_SPEED_1GB_FULL 0x0020
#define IXGBE_LINK_SPEED_10GB_FULL 0x0080
+#define IXGBE_LINK_SPEED_82598_AUTONEG (IXGBE_LINK_SPEED_1GB_FULL | \
+ IXGBE_LINK_SPEED_10GB_FULL)
+
+/* Physical layer type */
+typedef u32 ixgbe_physical_layer;
+#define IXGBE_PHYSICAL_LAYER_UNKNOWN 0
+#define IXGBE_PHYSICAL_LAYER_10GBASE_T 0x0001
+#define IXGBE_PHYSICAL_LAYER_1000BASE_T 0x0002
+#define IXGBE_PHYSICAL_LAYER_100BASE_T 0x0004
+#define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU 0x0008
+#define IXGBE_PHYSICAL_LAYER_10GBASE_LR 0x0010
+#define IXGBE_PHYSICAL_LAYER_10GBASE_LRM 0x0020
+#define IXGBE_PHYSICAL_LAYER_10GBASE_SR 0x0040
+#define IXGBE_PHYSICAL_LAYER_10GBASE_KX4 0x0080
+#define IXGBE_PHYSICAL_LAYER_10GBASE_CX4 0x0100
+#define IXGBE_PHYSICAL_LAYER_1000BASE_KX 0x0200
+#define IXGBE_PHYSICAL_LAYER_1000BASE_BX 0x0400
enum ixgbe_eeprom_type {
enum ixgbe_phy_type {
ixgbe_phy_unknown = 0,
- ixgbe_phy_tn,
ixgbe_phy_qt,
- ixgbe_phy_xaui
+ ixgbe_phy_xaui,
+ ixgbe_phy_tw_tyco,
+ ixgbe_phy_tw_unknown,
+ ixgbe_phy_sfp_avago,
+ ixgbe_phy_sfp_ftl,
+ ixgbe_phy_sfp_unknown,
+ ixgbe_phy_generic
+};
+
+/*
+ * SFP+ module type IDs:
+ *
+ * ID Module Type
+ * =============
+ * 0 SFP_DA_CU
+ * 1 SFP_SR
+ * 2 SFP_LR
+ */
+enum ixgbe_sfp_type {
+ ixgbe_sfp_type_da_cu = 0,
+ ixgbe_sfp_type_sr = 1,
+ ixgbe_sfp_type_lr = 2,
+ ixgbe_sfp_type_unknown = 0xFFFF
};
enum ixgbe_media_type {
ixgbe_media_type_unknown = 0,
ixgbe_media_type_fiber,
ixgbe_media_type_copper,
- ixgbe_media_type_backplane
+ ixgbe_media_type_backplane,
+ ixgbe_media_type_virtual
};
/* Flow Control Settings */
typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr,
u32 *vmdq);
+/* Function pointer table */
+struct ixgbe_eeprom_operations {
+ s32 (*init_params)(struct ixgbe_hw *);
+ s32 (*read)(struct ixgbe_hw *, u16, u16 *);
+ s32 (*write)(struct ixgbe_hw *, u16, u16);
+ s32 (*validate_checksum)(struct ixgbe_hw *, u16 *);
+ s32 (*update_checksum)(struct ixgbe_hw *);
+};
+
struct ixgbe_mac_operations {
- s32 (*reset)(struct ixgbe_hw *);
+ s32 (*init_hw)(struct ixgbe_hw *);
+ s32 (*reset_hw)(struct ixgbe_hw *);
+ s32 (*start_hw)(struct ixgbe_hw *);
+ s32 (*clear_hw_cntrs)(struct ixgbe_hw *);
enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
+ s32 (*get_supported_physical_layer)(struct ixgbe_hw *);
+ s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
+ s32 (*stop_adapter)(struct ixgbe_hw *);
+ s32 (*get_bus_info)(struct ixgbe_hw *);
+ s32 (*read_analog_reg8)(struct ixgbe_hw*, u32, u8*);
+ s32 (*write_analog_reg8)(struct ixgbe_hw*, u32, u8);
+
+ /* Link */
s32 (*setup_link)(struct ixgbe_hw *);
- s32 (*check_link)(struct ixgbe_hw *, u32 *, bool *, bool);
- s32 (*setup_link_speed)(struct ixgbe_hw *, u32, bool, bool);
- s32 (*get_link_settings)(struct ixgbe_hw *, u32 *, bool *);
+ s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool,
+ bool);
+ s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
+ s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,
+ bool *);
+
+ /* LED */
+ s32 (*led_on)(struct ixgbe_hw *, u32);
+ s32 (*led_off)(struct ixgbe_hw *, u32);
+ s32 (*blink_led_start)(struct ixgbe_hw *, u32);
+ s32 (*blink_led_stop)(struct ixgbe_hw *, u32);
+
+ /* RAR, Multicast, VLAN */
+ s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32, u32);
+ s32 (*clear_rar)(struct ixgbe_hw *, u32);
+ s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32);
+ s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32);
+ s32 (*init_rx_addrs)(struct ixgbe_hw *);
+ s32 (*update_uc_addr_list)(struct ixgbe_hw *, u8 *, u32,
+ ixgbe_mc_addr_itr);
+ s32 (*update_mc_addr_list)(struct ixgbe_hw *, u8 *, u32,
+ ixgbe_mc_addr_itr);
+ s32 (*enable_mc)(struct ixgbe_hw *);
+ s32 (*disable_mc)(struct ixgbe_hw *);
+ s32 (*clear_vfta)(struct ixgbe_hw *);
+ s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool);
+ s32 (*init_uta_tables)(struct ixgbe_hw *);
+
+ /* Flow Control */
+ s32 (*setup_fc)(struct ixgbe_hw *, s32);
};
struct ixgbe_phy_operations {
+ s32 (*identify)(struct ixgbe_hw *);
+ s32 (*identify_sfp)(struct ixgbe_hw *);
+ s32 (*reset)(struct ixgbe_hw *);
+ s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *);
+ s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16);
s32 (*setup_link)(struct ixgbe_hw *);
- s32 (*check_link)(struct ixgbe_hw *, u32 *, bool *);
- s32 (*setup_link_speed)(struct ixgbe_hw *, u32, bool, bool);
-};
-
-struct ixgbe_mac_info {
- struct ixgbe_mac_operations ops;
- enum ixgbe_mac_type type;
- u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
- u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
- s32 mc_filter_type;
- u32 mcft_size;
- u32 vft_size;
- u32 num_rar_entries;
- u32 num_rx_queues;
- u32 num_tx_queues;
- u32 link_attach_type;
- u32 link_mode_select;
- bool link_settings_loaded;
+ s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool,
+ bool);
+ s32 (*read_i2c_byte)(struct ixgbe_hw *, u8, u8, u8 *);
+ s32 (*write_i2c_byte)(struct ixgbe_hw *, u8, u8, u8);
+ s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *);
+ s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8);
};
struct ixgbe_eeprom_info {
- enum ixgbe_eeprom_type type;
- u16 word_size;
- u16 address_bits;
+ struct ixgbe_eeprom_operations ops;
+ enum ixgbe_eeprom_type type;
+ u32 semaphore_delay;
+ u16 word_size;
+ u16 address_bits;
};
-struct ixgbe_phy_info {
- struct ixgbe_phy_operations ops;
-
- enum ixgbe_phy_type type;
- u32 addr;
- u32 id;
- u32 revision;
- enum ixgbe_media_type media_type;
- u32 autoneg_advertised;
- bool autoneg_wait_to_complete;
+struct ixgbe_mac_info {
+ struct ixgbe_mac_operations ops;
+ enum ixgbe_mac_type type;
+ u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+ u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+ s32 mc_filter_type;
+ u32 mcft_size;
+ u32 vft_size;
+ u32 num_rar_entries;
+ u32 max_tx_queues;
+ u32 max_rx_queues;
+ u32 link_attach_type;
+ u32 link_mode_select;
+ bool link_settings_loaded;
+ bool autoneg;
+ bool autoneg_failed;
};
-struct ixgbe_info {
- enum ixgbe_mac_type mac;
- s32 (*get_invariants)(struct ixgbe_hw *);
- struct ixgbe_mac_operations *mac_ops;
+struct ixgbe_phy_info {
+ struct ixgbe_phy_operations ops;
+ enum ixgbe_phy_type type;
+ u32 addr;
+ u32 id;
+ enum ixgbe_sfp_type sfp_type;
+ u32 revision;
+ enum ixgbe_media_type media_type;
+ bool reset_disable;
+ ixgbe_autoneg_advertised autoneg_advertised;
+ bool autoneg_wait_to_complete;
};
struct ixgbe_hw {
bool adapter_stopped;
};
+struct ixgbe_info {
+ enum ixgbe_mac_type mac;
+ s32 (*get_invariants)(struct ixgbe_hw *);
+ struct ixgbe_mac_operations *mac_ops;
+ struct ixgbe_eeprom_operations *eeprom_ops;
+ struct ixgbe_phy_operations *phy_ops;
+};
+
+
/* Error Codes */
#define IXGBE_ERR_EEPROM -1
#define IXGBE_ERR_EEPROM_CHECKSUM -2
#define IXGBE_ERR_RESET_FAILED -15
#define IXGBE_ERR_SWFW_SYNC -16
#define IXGBE_ERR_PHY_ADDR_INVALID -17
+#define IXGBE_ERR_I2C -18
+#define IXGBE_ERR_SFP_NOT_SUPPORTED -19
#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF
#endif /* _IXGBE_TYPE_H_ */
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff