port_task is tightly bound to the standard SFF PIO HSM implementation.
Using it for any other purpose would be error-prone and there's no
such user and if some drivers need such feature, it would be much
better off using its own. Move it inside CONFIG_ATA_SFF and rename it
to sff_pio_task.
The only function which is exposed to the core layer is
ata_sff_flush_pio_task() which is renamed from ata_port_flush_task()
and now also takes care of resetting hsm_task_state to HSM_ST_IDLE,
which is possible as it's now specific to PIO HSM.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
unsigned int ata_print_id = 1;
-static struct workqueue_struct *ata_wq;
struct workqueue_struct *ata_aux_wq;
return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
}
-/**
- * ata_pio_queue_task - Queue port_task
- * @ap: The ata_port to queue port_task for
- * @data: data for @fn to use
- * @delay: delay time in msecs for workqueue function
- *
- * Schedule @fn(@data) for execution after @delay jiffies using
- * port_task. There is one port_task per port and it's the
- * user(low level driver)'s responsibility to make sure that only
- * one task is active at any given time.
- *
- * libata core layer takes care of synchronization between
- * port_task and EH. ata_pio_queue_task() may be ignored for EH
- * synchronization.
- *
- * LOCKING:
- * Inherited from caller.
- */
-void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay)
-{
- ap->port_task_data = data;
-
- /* may fail if ata_port_flush_task() in progress */
- queue_delayed_work(ata_wq, &ap->port_task, msecs_to_jiffies(delay));
-}
-
-/**
- * ata_port_flush_task - Flush port_task
- * @ap: The ata_port to flush port_task for
- *
- * After this function completes, port_task is guranteed not to
- * be running or scheduled.
- *
- * LOCKING:
- * Kernel thread context (may sleep)
- */
-void ata_port_flush_task(struct ata_port *ap)
-{
- DPRINTK("ENTER\n");
-
- cancel_rearming_delayed_work(&ap->port_task);
-
- if (ata_msg_ctl(ap))
- ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__);
-}
-
static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
{
struct completion *waiting = qc->private_data;
rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout));
- ata_port_flush_task(ap);
+ ata_sff_flush_pio_task(ap);
if (!rc) {
spin_lock_irqsave(ap->lock, flags);
ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
#endif
-#ifdef CONFIG_ATA_SFF
- INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
-#else
- INIT_DELAYED_WORK(&ap->port_task, NULL);
-#endif
INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
INIT_LIST_HEAD(&ap->eh_done_q);
ata_parse_force_param();
- /*
- * FIXME: In UP case, there is only one workqueue thread and if you
- * have more than one PIO device, latency is bloody awful, with
- * occasional multi-second "hiccups" as one PIO device waits for
- * another. It's an ugly wart that users DO occasionally complain
- * about; luckily most users have at most one PIO polled device.
- */
- ata_wq = create_workqueue("ata");
- if (!ata_wq)
- goto fail;
-
ata_aux_wq = create_singlethread_workqueue("ata_aux");
if (!ata_aux_wq)
goto fail;
fail:
kfree(ata_force_tbl);
- if (ata_wq)
- destroy_workqueue(ata_wq);
if (ata_aux_wq)
destroy_workqueue(ata_aux_wq);
return rc;
{
ata_sff_exit();
kfree(ata_force_tbl);
- destroy_workqueue(ata_wq);
destroy_workqueue(ata_aux_wq);
}
EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
-EXPORT_SYMBOL_GPL(ata_pio_queue_task);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
EXPORT_SYMBOL_GPL(ata_timing_find_mode);
EXPORT_SYMBOL_GPL(ata_timing_compute);
DPRINTK("ENTER\n");
- /* synchronize with port task */
- ata_port_flush_task(ap);
+ /* make sure sff pio task is not running */
+ ata_sff_flush_pio_task(ap);
/* synchronize with host lock and sort out timeouts */
#include "libata.h"
+static struct workqueue_struct *ata_sff_wq;
+
const struct ata_port_operations ata_sff_port_ops = {
.inherits = &ata_base_port_ops,
if (in_wq)
spin_unlock_irqrestore(ap->lock, flags);
- /* if polling, ata_pio_task() handles the rest.
+ /* if polling, ata_sff_pio_task() handles the rest.
* otherwise, interrupt handler takes over from here.
*/
break;
}
EXPORT_SYMBOL_GPL(ata_sff_hsm_move);
-void ata_pio_task(struct work_struct *work)
+void ata_sff_queue_pio_task(struct ata_port *ap, unsigned long delay)
+{
+ /* may fail if ata_sff_flush_pio_task() in progress */
+ queue_delayed_work(ata_sff_wq, &ap->sff_pio_task,
+ msecs_to_jiffies(delay));
+}
+EXPORT_SYMBOL_GPL(ata_sff_queue_pio_task);
+
+void ata_sff_flush_pio_task(struct ata_port *ap)
+{
+ DPRINTK("ENTER\n");
+
+ cancel_rearming_delayed_work(&ap->sff_pio_task);
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ if (ata_msg_ctl(ap))
+ ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__);
+}
+
+static void ata_sff_pio_task(struct work_struct *work)
{
struct ata_port *ap =
- container_of(work, struct ata_port, port_task.work);
- struct ata_queued_cmd *qc = ap->port_task_data;
+ container_of(work, struct ata_port, sff_pio_task.work);
+ struct ata_queued_cmd *qc;
u8 status;
int poll_next;
+ /* qc can be NULL if timeout occurred */
+ qc = ata_qc_from_tag(ap, ap->link.active_tag);
+ if (!qc)
+ return;
+
fsm_start:
WARN_ON_ONCE(ap->hsm_task_state == HSM_ST_IDLE);
msleep(2);
status = ata_sff_busy_wait(ap, ATA_BUSY, 10);
if (status & ATA_BUSY) {
- ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE);
+ ata_sff_queue_pio_task(ap, ATA_SHORT_PAUSE);
return;
}
}
ap->hsm_task_state = HSM_ST_LAST;
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_pio_queue_task(ap, qc, 0);
+ ata_sff_queue_pio_task(ap, 0);
break;
if (qc->tf.flags & ATA_TFLAG_WRITE) {
/* PIO data out protocol */
ap->hsm_task_state = HSM_ST_FIRST;
- ata_pio_queue_task(ap, qc, 0);
+ ata_sff_queue_pio_task(ap, 0);
- /* always send first data block using
- * the ata_pio_task() codepath.
+ /* always send first data block using the
+ * ata_sff_pio_task() codepath.
*/
} else {
/* PIO data in protocol */
ap->hsm_task_state = HSM_ST;
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_pio_queue_task(ap, qc, 0);
+ ata_sff_queue_pio_task(ap, 0);
- /* if polling, ata_pio_task() handles the rest.
- * otherwise, interrupt handler takes over from here.
+ /* if polling, ata_sff_pio_task() handles the
+ * rest. otherwise, interrupt handler takes
+ * over from here.
*/
}
/* send cdb by polling if no cdb interrupt */
if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
(qc->tf.flags & ATA_TFLAG_POLLING))
- ata_pio_queue_task(ap, qc, 0);
+ ata_sff_queue_pio_task(ap, 0);
break;
case ATAPI_PROT_DMA:
/* send cdb by polling if no cdb interrupt */
if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
- ata_pio_queue_task(ap, qc, 0);
+ ata_sff_queue_pio_task(ap, 0);
break;
default:
/* reset PIO HSM and stop DMA engine */
spin_lock_irqsave(ap->lock, flags);
- ap->hsm_task_state = HSM_ST_IDLE;
-
if (ap->ioaddr.bmdma_addr &&
qc && (qc->tf.protocol == ATA_PROT_DMA ||
qc->tf.protocol == ATAPI_PROT_DMA)) {
spin_lock_irqsave(ap->lock, flags);
- ap->hsm_task_state = HSM_ST_IDLE;
-
if (ap->ioaddr.bmdma_addr)
ap->ops->bmdma_stop(qc);
*/
void ata_sff_port_init(struct ata_port *ap)
{
+ INIT_DELAYED_WORK(&ap->sff_pio_task, ata_sff_pio_task);
ap->ctl = ATA_DEVCTL_OBS;
ap->last_ctl = 0xFF;
}
int __init ata_sff_init(void)
{
+ /*
+ * FIXME: In UP case, there is only one workqueue thread and if you
+ * have more than one PIO device, latency is bloody awful, with
+ * occasional multi-second "hiccups" as one PIO device waits for
+ * another. It's an ugly wart that users DO occasionally complain
+ * about; luckily most users have at most one PIO polled device.
+ */
+ ata_sff_wq = create_workqueue("ata_sff");
+ if (!ata_sff_wq)
+ return -ENOMEM;
+
return 0;
}
void __exit ata_sff_exit(void)
{
+ destroy_workqueue(ata_sff_wq);
}
u64 block, u32 n_block, unsigned int tf_flags,
unsigned int tag);
extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
-extern void ata_port_flush_task(struct ata_port *ap);
extern unsigned ata_exec_internal(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, void *buf, unsigned int buflen,
/* libata-sff.c */
#ifdef CONFIG_ATA_SFF
-extern void ata_pio_task(struct work_struct *work);
+extern void ata_sff_flush_pio_task(struct ata_port *ap);
extern void ata_sff_port_init(struct ata_port *ap);
extern int ata_sff_init(void);
extern void ata_sff_exit(void);
#else /* CONFIG_ATA_SFF */
+static inline void ata_sff_flush_pio_task(struct ata_port *ap)
+{ }
static inline void ata_sff_port_init(struct ata_port *ap)
{ }
static inline int ata_sff_init(void)
}
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_pio_queue_task(ap, qc, 0);
+ ata_sff_queue_pio_task(ap, 0);
return 0;
}
struct ata_ioports ioaddr; /* ATA cmd/ctl/dma register blocks */
u8 ctl; /* cache of ATA control register */
u8 last_ctl; /* Cache last written value */
+ struct delayed_work sff_pio_task;
#endif /* CONFIG_ATA_SFF */
unsigned int pio_mask;
struct ata_host *host;
struct device *dev;
- void *port_task_data;
- struct delayed_work port_task;
struct delayed_work hotplug_task;
struct work_struct scsi_rescan_task;
extern int ata_cable_ignore(struct ata_port *ap);
extern int ata_cable_unknown(struct ata_port *ap);
-extern void ata_pio_queue_task(struct ata_port *ap, void *data,
- unsigned long delay);
-
/* Timing helpers */
extern unsigned int ata_pio_need_iordy(const struct ata_device *);
extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode);
extern void ata_sff_irq_clear(struct ata_port *ap);
extern int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
u8 status, int in_wq);
+extern void ata_sff_queue_pio_task(struct ata_port *ap, unsigned long delay);
extern unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc);
extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc);
extern unsigned int ata_sff_host_intr(struct ata_port *ap,
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / commitdiff