arm: dts: qcom: Add board clocks

These clocks are fixed rate board sources that should be in DT.
Add them.

Cc: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>

diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 134cd91d68ece1034077c0e36f154756f6143cb6..51a40d84145c51b4a206598e3344181be1442a64 100644 (file)
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -49,6 +49,29 @@
                qcom,no-pc-write;
        };
 
+       clocks {
+               cxo_board {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <19200000>;
+                       clock-output-names = "cxo_board";
+               };
+
+               pxo_board {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <27000000>;
+                       clock-output-names = "pxo_board";
+               };
+
+               sleep_clk {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <32768>;
+                       clock-output-names = "sleep_clk";
+               };
+       };
+
        soc: soc {
                #address-cells = <1>;
                #size-cells = <1>;