[media] dib0700: fix RC support on Hauppauge Nova-TD
authorMauro Carvalho Chehab <m.chehab@samsung.com>
Wed, 21 May 2014 20:40:25 +0000 (17:40 -0300)
committerMauro Carvalho Chehab <m.chehab@samsung.com>
Sun, 25 May 2014 20:44:19 +0000 (17:44 -0300)
The RC support o Nova-TD is broken, as the RC endpoint there
is an interrupt endpoint.

That produces an ugly calltrace at the Kernel logs:

WARNING: CPU: 2 PID: 56 at drivers/usb/core/urb.c:450 usb_submit_urb+0x1fd/0x5c0()
usb 1-1.2: BOGUS urb xfer, pipe 3 != type 1
Modules linked in: rc_dib0700_rc5(OF) dvb_usb_dib0700(OF) dib9000(OF) dib8000(OF) dib7000m(OF) dib0090(OF) dib0070(OF) dib7000p(OF) dib3000mc(OF) dibx000_common(OF) dvb_usb(OF) rc_core(OF) snd_usb_audio snd_usbmidi_lib snd_hwdep snd_rawmidi snd_seq snd_seq_device snd_pcm snd_timer snd soundcore bnep bluetooth 6lowpan_iphc rfkill au0828(OF) xc5000(OF) au8522_dig(OF) au8522_common(OF) tveeprom(OF) dvb_core(OF) nouveau i915 mxm_wmi ttm i2c_algo_bit drm_kms_helper drm r8169 mii i2c_core video wmi [last unloaded: au0828]
CPU: 2 PID: 56 Comm: khubd Tainted: GF          O 3.14.2-200.fc20.x86_64 #1
Hardware name: SAMSUNG ELECTRONICS CO., LTD. 550P5C/550P7C/SAMSUNG_NP1234567890, BIOS P05ABI.016.130917.dg 09/17/2013
 0000000000000000 00000000610866bc ffff880223703860 ffffffff816eec92
 ffff8802237038a8 ffff880223703898 ffffffff8108a1bd ffff8800916a2180
 ffff8801d5b16000 0000000000000003 0000000000000003 0000000000000020
Call Trace:
 [<ffffffff816eec92>] dump_stack+0x45/0x56
 [<ffffffff8108a1bd>] warn_slowpath_common+0x7d/0xa0
 [<ffffffff8108a23c>] warn_slowpath_fmt+0x5c/0x80
 [<ffffffff814e3ebd>] usb_submit_urb+0x1fd/0x5c0
 [<ffffffffa0445925>] dib0700_rc_setup+0xb5/0x120 [dvb_usb_dib0700]
 [<ffffffffa0445a58>] dib0700_probe+0xc8/0x130 [dvb_usb_dib0700]
...

Fix it by detecting if the endpoint is bulk or interrupt.

Tested with both Hauppauge Nova-TD model 52009 (interrupt) and with a
 Prolink Pixelview SBTVD model PV-D231U (bulk).

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/usb/dvb-usb/dib0700.h
drivers/media/usb/dvb-usb/dib0700_core.c
drivers/media/usb/dvb-usb/dib0700_devices.c

index 637b6123f391e9bce0fce074314e270e4e9e9238..927617d95616f4ae85a1db898711b3477504641b 100644 (file)
@@ -59,7 +59,7 @@ extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8
 extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
 extern int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen);
 extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw);
-extern int dib0700_rc_setup(struct dvb_usb_device *d);
+extern int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf);
 extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
 extern struct i2c_algorithm dib0700_i2c_algo;
 extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
index bf2a908d74cf3a804fe34eededac8157ab20aa0f..c14285fa8271f84bdb7125ce9ae61db40985821b 100644 (file)
@@ -754,17 +754,20 @@ resubmit:
        usb_submit_urb(purb, GFP_ATOMIC);
 }
 
-int dib0700_rc_setup(struct dvb_usb_device *d)
+int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf)
 {
        struct dib0700_state *st = d->priv;
        struct urb *purb;
-       int ret;
+       const struct usb_endpoint_descriptor *e;
+       int ret, rc_ep = 1;
+       unsigned int pipe = 0;
 
        /* Poll-based. Don't initialize bulk mode */
-       if (st->fw_version < 0x10200)
+       if (st->fw_version < 0x10200 || !intf)
                return 0;
 
        /* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
+
        purb = usb_alloc_urb(0, GFP_KERNEL);
        if (purb == NULL) {
                err("rc usb alloc urb failed");
@@ -779,9 +782,35 @@ int dib0700_rc_setup(struct dvb_usb_device *d)
        }
 
        purb->status = -EINPROGRESS;
-       usb_fill_bulk_urb(purb, d->udev, usb_rcvbulkpipe(d->udev, 1),
-                         purb->transfer_buffer, RC_MSG_SIZE_V1_20,
-                         dib0700_rc_urb_completion, d);
+
+       /*
+        * Some devices like the Hauppauge NovaTD model 52009 use an interrupt
+        * endpoint, while others use a bulk one.
+        */
+       e = &intf->altsetting[0].endpoint[rc_ep].desc;
+       if (usb_endpoint_dir_in(e)) {
+               if (usb_endpoint_xfer_bulk(e)) {
+                       pipe = usb_rcvbulkpipe(d->udev, rc_ep);
+                       usb_fill_bulk_urb(purb, d->udev, pipe,
+                                         purb->transfer_buffer,
+                                         RC_MSG_SIZE_V1_20,
+                                         dib0700_rc_urb_completion, d);
+
+               } else if (usb_endpoint_xfer_int(e)) {
+                       pipe = usb_rcvintpipe(d->udev, rc_ep);
+                       usb_fill_int_urb(purb, d->udev, pipe,
+                                         purb->transfer_buffer,
+                                         RC_MSG_SIZE_V1_20,
+                                         dib0700_rc_urb_completion, d, 1);
+               }
+       }
+
+       if (!pipe) {
+               err("There's no endpoint for remote controller");
+               kfree(purb->transfer_buffer);
+               usb_free_urb(purb);
+               return 0;
+       }
 
        ret = usb_submit_urb(purb, GFP_ATOMIC);
        if (ret) {
@@ -820,7 +849,7 @@ static int dib0700_probe(struct usb_interface *intf,
                        else
                                dev->props.rc.core.bulk_mode = false;
 
-                       dib0700_rc_setup(dev);
+                       dib0700_rc_setup(dev, intf);
 
                        return 0;
                }
index 829323e42ca095671372ec15de5cea81a4810fea..10e0db8d1850c03c00804091acb24645c7ae7181 100644 (file)
@@ -514,7 +514,7 @@ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
 
        /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]);  */
 
-       dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */
+       dib0700_rc_setup(d, NULL); /* reset ir sensor data to prevent false events */
 
        d->last_event = 0;
        switch (d->props.rc.core.protocol) {