net: qmi_wwan: support devices having a shared QMI/wwan interface
authorBjørn Mork <bjorn@mork.no>
Fri, 9 Mar 2012 11:35:05 +0000 (12:35 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 9 Mar 2012 21:11:01 +0000 (13:11 -0800)
Use the new cdc-wdm subdriver interface to create a device management
device even for USB devices having a single combined QMI/wwan USB
interface with three endpoints (int, bulk in, bulk out) instead of
separate data and control interfaces.

Some Huawei devices can be switched to a single interface mode for
use with other operating systems than Linux.  This adds support
for these devices when they run in such non-Linux modes.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/net/usb/qmi_wwan.c

index 739e6de7abcbc638f350739eb6808196f42f4a57..a61c7a1aff8b1999f18d423dfe20a833b19df052 100644 (file)
@@ -13,6 +13,7 @@
 #include <linux/usb.h>
 #include <linux/usb/cdc.h>
 #include <linux/usb/usbnet.h>
+#include <linux/usb/cdc-wdm.h>
 
 /* The name of the CDC Device Management driver */
 #define DM_DRIVER "cdc_wdm"
@@ -64,6 +65,9 @@ static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
        struct usb_cdc_ether_desc *cdc_ether = NULL;
        u32 required = 1 << USB_CDC_HEADER_TYPE | 1 << USB_CDC_UNION_TYPE;
        u32 found = 0;
+       atomic_t *pmcount = (void *)&dev->data[1];
+
+       atomic_set(pmcount, 0);
 
        /*
         * assume a data interface has no additional descriptors and
@@ -170,13 +174,127 @@ err:
        return status;
 }
 
-/* stolen from cdc_ether.c */
+/* using a counter to merge subdriver requests with our own into a combined state */
 static int qmi_wwan_manage_power(struct usbnet *dev, int on)
 {
-       dev->intf->needs_remote_wakeup = on;
-       return 0;
+       atomic_t *pmcount = (void *)&dev->data[1];
+       int rv = 0;
+
+       dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(pmcount), on);
+
+       if ((on && atomic_add_return(1, pmcount) == 1) || (!on && atomic_dec_and_test(pmcount))) {
+               /* need autopm_get/put here to ensure the usbcore sees the new value */
+               rv = usb_autopm_get_interface(dev->intf);
+               if (rv < 0)
+                       goto err;
+               dev->intf->needs_remote_wakeup = on;
+               usb_autopm_put_interface(dev->intf);
+       }
+err:
+       return rv;
+}
+
+static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
+{
+       struct usbnet *dev = usb_get_intfdata(intf);
+       return qmi_wwan_manage_power(dev, on);
 }
 
+/* Some devices combine the "control" and "data" functions into a
+ * single interface with all three endpoints: interrupt + bulk in and
+ * out
+ *
+ * Setting up cdc-wdm as a subdriver owning the interrupt endpoint
+ * will let it provide userspace access to the encapsulated QMI
+ * protocol without interfering with the usbnet operations.
+  */
+static int qmi_wwan_bind_shared(struct usbnet *dev, struct usb_interface *intf)
+{
+       int rv;
+       struct usb_driver *subdriver = NULL;
+       atomic_t *pmcount = (void *)&dev->data[1];
+
+       atomic_set(pmcount, 0);
+
+       /* collect all three endpoints */
+       rv = usbnet_get_endpoints(dev, intf);
+       if (rv < 0)
+               goto err;
+
+       /* require interrupt endpoint for subdriver */
+       if (!dev->status) {
+               rv = -EINVAL;
+               goto err;
+       }
+
+       subdriver = usb_cdc_wdm_register(intf, &dev->status->desc, 512, &qmi_wwan_cdc_wdm_manage_power);
+       if (IS_ERR(subdriver)) {
+               rv = PTR_ERR(subdriver);
+               goto err;
+       }
+
+       /* can't let usbnet use the interrupt endpoint */
+       dev->status = NULL;
+
+       /* save subdriver struct for suspend/resume wrappers */
+       dev->data[0] = (unsigned long)subdriver;
+
+err:
+       return rv;
+}
+
+static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf)
+{
+       struct usb_driver *subdriver = (void *)dev->data[0];
+
+       if (subdriver && subdriver->disconnect)
+               subdriver->disconnect(intf);
+
+       dev->data[0] = (unsigned long)NULL;
+}
+
+/* suspend/resume wrappers calling both usbnet and the cdc-wdm
+ * subdriver if present.
+ *
+ * NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide
+ * wrappers for those without adding usbnet reset support first.
+ */
+static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
+{
+       struct usbnet *dev = usb_get_intfdata(intf);
+       struct usb_driver *subdriver = (void *)dev->data[0];
+       int ret;
+
+       ret = usbnet_suspend(intf, message);
+       if (ret < 0)
+               goto err;
+
+       if (subdriver && subdriver->suspend)
+               ret = subdriver->suspend(intf, message);
+       if (ret < 0)
+               usbnet_resume(intf);
+err:
+       return ret;
+}
+
+static int qmi_wwan_resume(struct usb_interface *intf)
+{
+       struct usbnet *dev = usb_get_intfdata(intf);
+       struct usb_driver *subdriver = (void *)dev->data[0];
+       int ret = 0;
+
+       if (subdriver && subdriver->resume)
+               ret = subdriver->resume(intf);
+       if (ret < 0)
+               goto err;
+       ret = usbnet_resume(intf);
+       if (ret < 0 && subdriver && subdriver->resume && subdriver->suspend)
+               subdriver->suspend(intf, PMSG_SUSPEND);
+err:
+       return ret;
+}
+
+
 static const struct driver_info        qmi_wwan_info = {
        .description    = "QMI speaking wwan device",
        .flags          = FLAG_WWAN,
@@ -184,19 +302,37 @@ static const struct driver_info   qmi_wwan_info = {
        .manage_power   = qmi_wwan_manage_power,
 };
 
+static const struct driver_info        qmi_wwan_shared = {
+       .description    = "QMI speaking wwan device with combined interface",
+       .flags          = FLAG_WWAN,
+       .bind           = qmi_wwan_bind_shared,
+       .unbind         = qmi_wwan_unbind_shared,
+       .manage_power   = qmi_wwan_manage_power,
+};
+
 #define HUAWEI_VENDOR_ID       0x12D1
 
 static const struct usb_device_id products[] = {
-{
-       /* Huawei E392, E398 and possibly others sharing both device id and more... */
-       .match_flags        = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
-       .idVendor           = HUAWEI_VENDOR_ID,
-       .bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
-       .bInterfaceSubClass = 1,
-       .bInterfaceProtocol = 8, /* NOTE: This is the *slave* interface of the CDC Union! */
-       .driver_info        = (unsigned long)&qmi_wwan_info,
-}, {
-},     /* END */
+       {       /* Huawei E392, E398 and possibly others sharing both device id and more... */
+               .match_flags        = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
+               .idVendor           = HUAWEI_VENDOR_ID,
+               .bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
+               .bInterfaceSubClass = 1,
+               .bInterfaceProtocol = 8, /* NOTE: This is the *slave* interface of the CDC Union! */
+               .driver_info        = (unsigned long)&qmi_wwan_info,
+       },
+       {       /* Huawei E392, E398 and possibly others in "Windows mode"
+                * using a combined control and data interface without any CDC
+                * functional descriptors
+                */
+               .match_flags        = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
+               .idVendor           = HUAWEI_VENDOR_ID,
+               .bInterfaceClass    = USB_CLASS_VENDOR_SPEC,
+               .bInterfaceSubClass = 1,
+               .bInterfaceProtocol = 17,
+               .driver_info        = (unsigned long)&qmi_wwan_shared,
+       },
+       { }     /* END */
 };
 MODULE_DEVICE_TABLE(usb, products);
 
@@ -205,9 +341,9 @@ static struct usb_driver qmi_wwan_driver = {
        .id_table             = products,
        .probe                = usbnet_probe,
        .disconnect           = usbnet_disconnect,
-       .suspend              = usbnet_suspend,
-       .resume               = usbnet_resume,
-       .reset_resume         = usbnet_resume,
+       .suspend              = qmi_wwan_suspend,
+       .resume               = qmi_wwan_resume,
+       .reset_resume         = qmi_wwan_resume,
        .supports_autosuspend = 1,
 };