drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages

On Wed, 2010-03-10 at 08:41 -0800, David Miller wrote:
> From: Mikael Pettersson <mikpe@it.uu.se>
> Date: Wed, 10 Mar 2010 16:33:28 +0100
> > Booting 2.6.34-rc1 on a machine with a tulip nic I see
> > a number of kernel messages that include "(null)" where
> > previous kernels included the string "tulip0":
> CC:'ing the guilty party :-)  It's one of the following
> commits:

Thanks Mikael.

Anonymity has some good attributes.
Blame avoidance is one of them.

I've broad shoulders.  It's me, then Dwight Howard...

There might be another few of these where ->name or ->dev
was used before struct device or net_device was registered.
I'll go back and check.

tulip_core has:

	if (tp->flags & HAS_MEDIA_TABLE) {
		sprintf(dev->name, DRV_NAME "%d", board_idx);	/* hack */
		tulip_parse_eeprom(dev);
		strcpy(dev->name, "eth%d");			/* un-hack */
	}

So I don't feel _too_ bad.

tulip_parse_eeprom is done before register_netdev so the logging
there can not use netdev_<level> or dev_<level>(&dev->dev

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 93f4e8309f8195539b850aa3f83f957e01329784..49f05d1431f5c6a67b3ffdff698e6866010ed259 100644 (file)
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -143,6 +143,12 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
 
 void __devinit tulip_parse_eeprom(struct net_device *dev)
 {
+       /*
+         dev is not registered at this point, so logging messages can't
+         use dev_<level> or netdev_<level> but dev->name is good via a
+         hack in the caller
+       */
+
        /* The last media info list parsed, for multiport boards.  */
        static struct mediatable *last_mediatable;
        static unsigned char *last_ee_data;
@@ -161,15 +167,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
                if (ee_data[0] == 0xff) {
                        if (last_mediatable) {
                                controller_index++;
-                               dev_info(&dev->dev,
-                                        "Controller %d of multiport board\n",
-                                        controller_index);
+                               pr_info("%s: Controller %d of multiport board\n",
+                                       dev->name, controller_index);
                                tp->mtable = last_mediatable;
                                ee_data = last_ee_data;
                                goto subsequent_board;
                        } else
-                               dev_info(&dev->dev,
-                                        "Missing EEPROM, this interface may not work correctly!\n");
+                               pr_info("%s: Missing EEPROM, this interface may not work correctly!\n",
+                                       dev->name);
                        return;
                }
          /* Do a fix-up based on the vendor half of the station address prefix. */
@@ -181,15 +186,14 @@ void __devinit tulip_parse_eeprom(struct net_device *dev)
                          i++;                  /* An Accton EN1207, not an outlaw Maxtech. */
                  memcpy(ee_data + 26, eeprom_fixups[i].newtable,
                                 sizeof(eeprom_fixups[i].newtable));
-                 dev_info(&dev->dev,
-                          "Old format EEPROM on '%s' board.  Using substitute media control info\n",
-                          eeprom_fixups[i].name);
+                 pr_info("%s: Old format EEPROM on '%s' board.  Using substitute media control info\n",
+                         dev->name, eeprom_fixups[i].name);
                  break;
                }
          }
          if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
-                 dev_info(&dev->dev,
-                          "Old style EEPROM with no media selection information\n");
+                 pr_info("%s: Old style EEPROM with no media selection information\n",
+                         dev->name);
                return;
          }
        }
@@ -217,8 +221,8 @@ subsequent_board:
                /* there is no phy information, don't even try to build mtable */
                if (count == 0) {
                        if (tulip_debug > 0)
-                               dev_warn(&dev->dev,
-                                        "no phy info, aborting mtable build\n");
+                               pr_warning("%s: no phy info, aborting mtable build\n",
+                                          dev->name);
                        return;
                }
 
@@ -234,8 +238,10 @@ subsequent_board:
                mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
                mtable->csr15dir = mtable->csr15val = 0;
 
-               dev_info(&dev->dev, "EEPROM default media type %s\n",
-                        media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]);
+               pr_info("%s: EEPROM default media type %s\n",
+                       dev->name,
+                       media & 0x0800 ? "Autosense"
+                                      : medianame[media & MEDIA_MASK]);
                for (i = 0; i < count; i++) {
                        struct medialeaf *leaf = &mtable->mleaf[i];
 
@@ -298,17 +304,17 @@ subsequent_board:
                        }
                        if (tulip_debug > 1  &&  leaf->media == 11) {
                                unsigned char *bp = leaf->leafdata;
-                               dev_info(&dev->dev,
-                                        "MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
-                                        bp[0], bp[1], bp[2 + bp[1]*2],
-                                        bp[5 + bp[2 + bp[1]*2]*2],
-                                        bp[4 + bp[2 + bp[1]*2]*2]);
+                               pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
+                                       dev->name,
+                                       bp[0], bp[1], bp[2 + bp[1]*2],
+                                       bp[5 + bp[2 + bp[1]*2]*2],
+                                       bp[4 + bp[2 + bp[1]*2]*2]);
                        }
-                       dev_info(&dev->dev,
-                                "Index #%d - Media %s (#%d) described by a %s (%d) block\n",
-                                i, medianame[leaf->media & 15], leaf->media,
-                                leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
-                                leaf->type);
+                       pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n",
+                               dev->name,
+                               i, medianame[leaf->media & 15], leaf->media,
+                               leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
+                               leaf->type);
                }
                if (new_advertise)
                        tp->sym_advertise = new_advertise;