drm/i915/edp: get the panel delay before powering up

In order to setup the i2c channel, we power up the panel
via ironlake_edp_panel_vdd_on, however it requires
intel_dp->panel_power_up_delay to be initialised,
which hasn't been setup yet.

So move things around so we set the panel power up
values first then init the i2c stuff.

This is one step to fixing the eDP panel in the MBP
from uninitialised state.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index a6c426afaa7aca46144f5a3710c0ea6f10a46b83..ace757af913366db3e7cff4e670fa9c804c84d08 100644 (file)
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2533,14 +2533,10 @@ intel_dp_init(struct drm_device *dev, int output_reg)
                        break;
        }
 
-       intel_dp_i2c_init(intel_dp, intel_connector, name);
-
        /* Cache some DPCD data in the eDP case */
        if (is_edp(intel_dp)) {
-               bool ret;
                struct edp_power_seq    cur, vbt;
                u32 pp_on, pp_off, pp_div;
-               struct edid *edid;
 
                pp_on = I915_READ(PCH_PP_ON_DELAYS);
                pp_off = I915_READ(PCH_PP_OFF_DELAYS);
@@ -2591,6 +2587,13 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 
                DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n",
                              intel_dp->backlight_on_delay, intel_dp->backlight_off_delay);
+       }
+
+       intel_dp_i2c_init(intel_dp, intel_connector, name);
+
+       if (is_edp(intel_dp)) {
+               bool ret;
+               struct edid *edid;
 
                ironlake_edp_panel_vdd_on(intel_dp);
                ret = intel_dp_get_dpcd(intel_dp);