/* see comments at top of file */
priv->bad_flow_control =
(le16_to_cpu(dev->descriptor.bcdDevice) <= 0x0206) ? 1 : 0;
- info("bcdDevice: %04x, bfc: %d",
+ dev_info(&dev->dev, "bcdDevice: %04x, bfc: %d\n",
le16_to_cpu(dev->descriptor.bcdDevice),
priv->bad_flow_control);
retval = usb_register(&belkin_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&belkin_device);
}
/* Success */
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
}
if (retval)
goto failed_usb_register;
- info(DRIVER_VERSION " " DRIVER_AUTHOR);
- info(DRIVER_DESC);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION " "
+ DRIVER_AUTHOR "\n");
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
return 0;
failed_usb_register:
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
retval = usb_register(&digi_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_VERSION ":" DRIVER_DESC);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&digi_acceleport_4_device);
if (retval)
goto failed_usb_register;
- info(DRIVER_VERSION ":" DRIVER_DESC);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
/* Assume its an FT232R */
priv->chip_type = FT232RL;
}
- info("Detected %s", ftdi_chip_name[priv->chip_type]);
+ dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
}
dbg("%s", __func__);
if (interface == udev->actconfig->interface[0]) {
- info("Ignoring serial port reserved for JTAG");
+ dev_info(&udev->dev,
+ "Ignoring serial port reserved for JTAG\n");
return -ENODEV;
}
if (ep->enabled && ep_desc->wMaxPacketSize == 0) {
ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
- info("Fixing invalid wMaxPacketSize on read pipe");
+ dev_info(&serial->dev->dev,
+ "Fixing invalid wMaxPacketSize on read pipe\n");
}
return 0;
if (retval)
goto failed_usb_register;
- info(DRIVER_VERSION ":" DRIVER_DESC);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&ftdi_sio_device);
retval = usb_register(&garmin_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
retval = usb_register(&hp49gp_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&hp49gp_device);
if (retval)
goto failed_usb_register;
atomic_set(&CmdUrbs, 0);
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
retval = usb_register(&io_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&edgeport_2port_device);
retval = usb_serial_register(&ipaq_device);
if (retval)
goto failed_usb_serial_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
if (vendor) {
ipaq_id_table[0].idVendor = vendor;
ipaq_id_table[0].idProduct = product;
if (retval)
goto failed_usb_register;
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&ipaq_device);
usb_serial_deregister(&ipw_device);
return retval;
}
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
}
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
retval = usb_register(&iuu_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&iuu_device);
if (retval)
goto failed_usb_register;
- info(DRIVER_VERSION ":" DRIVER_DESC);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
retval = usb_register(&keyspan_pda_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
#ifdef XIRCOM
KLSI_TIMEOUT);
if (rc < 0)
err("Change port settings failed (error = %d)", rc);
- info("%s - %d byte block, baudrate %x, databits %d, u1 %d, u2 %d",
- __func__,
- settings->pktlen,
- settings->baudrate, settings->databits,
- settings->unknown1, settings->unknown2);
+ dev_info(&port->serial->dev->dev,
+ "%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n",
+ settings->pktlen, settings->baudrate, settings->databits,
+ settings->unknown1, settings->unknown2);
return rc;
} /* klsi_105_chg_port_settings */
__u8 status_buf[KLSI_STATUSBUF_LEN] = { -1, -1};
__u16 status;
- info("%s - sending SIO Poll request", __func__);
+ dev_info(&port->serial->dev->dev, "sending SIO Poll request\n");
rc = usb_control_msg(port->serial->dev,
usb_rcvctrlpipe(port->serial->dev, 0),
KL5KUSB105A_SIO_POLL,
else {
status = get_unaligned_le16(status_buf);
- info("%s - read status %x %x", __func__,
- status_buf[0], status_buf[1]);
+ dev_info(&port->serial->dev->dev, "read status %x %x",
+ status_buf[0], status_buf[1]);
*line_state_p = klsi_105_status2linestate(status);
}
/* FIXME */
/* wgg - do I need this? I think so. */
usb_kill_urb(port->interrupt_in_urb);
- info("kl5kusb105 port stats: %ld bytes in, %ld bytes out",
- priv->bytes_in, priv->bytes_out);
+ dev_info(&port->serial->dev->dev,
+ "port stats: %ld bytes in, %ld bytes out\n",
+ priv->bytes_in, priv->bytes_out);
} /* klsi_105_close */
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&kl5kusb105d_device);
if (retval)
goto failed_usb_register;
- info(DRIVER_VERSION " " DRIVER_AUTHOR);
- info(DRIVER_DESC);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
retval = usb_register(&mct_u232_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&mct_u232_device);
if (retval)
goto failed_port_device_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
/* Register with the usb */
retval = usb_register(&usb_driver);
goto failed_port_device_register;
dbg("%s\n", "Entring...");
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
/* Register with the usb */
retval = usb_register(&io_driver);
retval = usb_register(&omninet_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_VERSION ":" DRIVER_DESC);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&zyxel_omninet_device);
if (retval)
goto failed_driver_register;
- info(DRIVER_DESC ": " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
retval = usb_register(&pl2303_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&pl2303_device);
if (!fcs) {
int actual_length = data[length - 2] >> 2;
if (actual_length <= (length - 2)) {
- info("%s - actual: %d", __func__,
- actual_length);
+ dev_info(&urb->dev->dev, "%s - actual: %d\n",
+ __func__, actual_length);
tty_insert_flip_string(tty,
data, actual_length);
tty_flip_buffer_push(tty);
{
int i, retval;
- info(DRIVER_VERSION " " DRIVER_AUTHOR);
- info(DRIVER_DESC);
- info("vendor: %x product: %x safe: %d padded: %d\n",
- vendor, product, safe, padded);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
/* if we have vendor / product parameters patch them into id list */
if (vendor || product) {
- info("vendor: %x product: %x\n", vendor, product);
+ printk(KERN_INFO KBUILD_MODNAME ": vendor: %x product: %x\n",
+ vendor, product);
for (i = 0; i < ARRAY_SIZE(id_table); i++) {
if (!id_table[i].idVendor && !id_table[i].idProduct) {
if (retval)
goto failed_driver_register;
- info(DRIVER_DESC ": " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
retval = usb_register(&spcp8x5_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&spcp8x5_device);
if (ret)
goto failed_usb;
- info(TI_DRIVER_DESC " " TI_DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " TI_DRIVER_VERSION ":"
+ TI_DRIVER_DESC "\n");
return 0;
goto exit_generic;
}
- info(DRIVER_DESC);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
return result;
retval, driver->description);
list_del(&driver->driver_list);
} else
- info("USB Serial support registered for %s",
+ printk(KERN_INFO "USB Serial support registered for %s\n",
driver->description);
return retval;
void usb_serial_deregister(struct usb_serial_driver *device)
{
/* must be called with BKL held */
- info("USB Serial deregistering driver %s", device->description);
+ printk(KERN_INFO "USB Serial deregistering driver %s\n",
+ device->description);
list_del(&device->driver_list);
usb_serial_bus_deregister(device);
}
break;
}
}
- info(
- "Untested USB device specified at time of module insertion");
- info("Warning: This is not guaranteed to work");
- info("Using a newer kernel is preferred to this method");
- info("Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x",
+ printk(KERN_INFO KBUILD_MODNAME
+ ": Untested USB device specified at time of module insertion\n");
+ printk(KERN_INFO KBUILD_MODNAME
+ ": Warning: This is not guaranteed to work\n");
+ printk(KERN_INFO KBUILD_MODNAME
+ ": Using a newer kernel is preferred to this method\n");
+ printk(KERN_INFO KBUILD_MODNAME
+ ": Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x\n",
vendor, product);
}
retval = usb_serial_register(&handspring_device);
retval = usb_register(&visor_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
return 0;
failed_usb_register:
hw_info = (struct whiteheat_hw_info *)&result[1];
- info("%s: Driver %s: Firmware v%d.%02d", serial->type->description,
- DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev);
+ dev_info(&serial->dev->dev, "%s: Driver %s: Firmware v%d.%02d\n",
+ serial->type->description, DRIVER_VERSION,
+ hw_info->sw_major_rev, hw_info->sw_minor_rev);
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
retval = usb_register(&whiteheat_driver);
if (retval)
goto failed_usb_register;
- info(DRIVER_DESC " " DRIVER_VERSION);
+ printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+ DRIVER_DESC "\n");
return 0;
failed_usb_register:
usb_serial_deregister(&whiteheat_device);