V4L/DVB (7753): saa7134: fix tuner setup
authorMauro Carvalho Chehab <mchehab@infradead.org>
Sat, 26 Apr 2008 17:05:58 +0000 (14:05 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Tue, 29 Apr 2008 21:41:33 +0000 (18:41 -0300)
Tuner setup were happening during i2c attach callback. This means that it would
happen on two conditions:

        1) if tuner module weren't load, it will happen at request_module("tuner");

        2) if tuner is not compiled as a module, or it is already loaded
           (for example, on setups with more than one tuner), it will happen
           when saa7134 registers I2C bus.

Due to that, if tuner were loaded, tuner setup will happen _before_ reading
the proper values at tuner eeprom. Since set_addr refuses to change for a tuner
that were previously defined (except if the tuner_addr is set), this were
making eeprom tuner detection useless.

This patch removes tuner type setup from saa7134-i2c, moving it to the proper
place, after taking eeprom into account.

Reviewed-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/video/saa7134/saa7134-cards.c
drivers/media/video/saa7134/saa7134-i2c.c

index 98375955a84b7c42e62b34a83cf76dc358d0c52f..4046b23a3139eb4155d0c1903f4ff161ad8013a4 100644 (file)
@@ -47,6 +47,9 @@ static char name_svideo[]  = "S-Video";
 /* ------------------------------------------------------------------ */
 /* board config info                                                  */
 
+/* If radio_type !=UNSET, radio_addr should be specified
+ */
+
 struct saa7134_board saa7134_boards[] = {
        [SAA7134_BOARD_UNKNOWN] = {
                .name           = "UNKNOWN/GENERIC",
@@ -3087,7 +3090,7 @@ struct saa7134_board saa7134_boards[] = {
                .tuner_type     = TUNER_PHILIPS_TD1316, /* untested */
                .radio_type     = TUNER_TEA5767, /* untested */
                .tuner_addr     = ADDR_UNSET,
-               .radio_addr     = ADDR_UNSET,
+               .radio_addr     = 0x60,
                .tda9887_conf   = TDA9887_PRESENT,
                .mpeg           = SAA7134_MPEG_DVB,
                .inputs         = {{
@@ -5577,20 +5580,87 @@ int saa7134_board_init1(struct saa7134_dev *dev)
        return 0;
 }
 
+static void saa7134_tuner_setup(struct saa7134_dev *dev)
+{
+       struct tuner_setup tun_setup;
+       unsigned int mode_mask = T_RADIO     |
+                                T_ANALOG_TV |
+                                T_DIGITAL_TV;
+
+       memset(&tun_setup, 0, sizeof(tun_setup));
+       tun_setup.tuner_callback = saa7134_tuner_callback;
+
+       if (saa7134_boards[dev->board].radio_type != UNSET) {
+               tun_setup.type = saa7134_boards[dev->board].radio_type;
+               tun_setup.addr = saa7134_boards[dev->board].radio_addr;
+
+               tun_setup.mode_mask = T_RADIO;
+
+               saa7134_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
+               mode_mask &= ~T_RADIO;
+       }
+
+       if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type != UNSET)) {
+               tun_setup.type = dev->tuner_type;
+               tun_setup.addr = dev->tuner_addr;
+               tun_setup.config = saa7134_boards[dev->board].tuner_config;
+               tun_setup.tuner_callback = saa7134_tuner_callback;
+
+               tun_setup.mode_mask = mode_mask;
+
+               saa7134_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
+       }
+
+       if (dev->tda9887_conf) {
+               struct v4l2_priv_tun_config tda9887_cfg;
+
+               tda9887_cfg.tuner = TUNER_TDA9887;
+               tda9887_cfg.priv = &dev->tda9887_conf;
+
+               saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG,
+                                        &tda9887_cfg);
+       }
+
+       if (dev->tuner_type == TUNER_XC2028) {
+               struct v4l2_priv_tun_config  xc2028_cfg;
+               struct xc2028_ctrl           ctl;
+
+               memset(&xc2028_cfg, 0, sizeof(ctl));
+               memset(&ctl, 0, sizeof(ctl));
+
+               ctl.fname   = XC2028_DEFAULT_FIRMWARE;
+               ctl.max_len = 64;
+
+               switch (dev->board) {
+               case SAA7134_BOARD_AVERMEDIA_A16D:
+                       ctl.demod = XC3028_FE_ZARLINK456;
+                       break;
+               default:
+                       ctl.demod = XC3028_FE_OREN538;
+                       ctl.mts = 1;
+               }
+
+               xc2028_cfg.tuner = TUNER_XC2028;
+               xc2028_cfg.priv  = &ctl;
+
+               saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
+       }
+}
+
 /* stuff which needs working i2c */
 int saa7134_board_init2(struct saa7134_dev *dev)
 {
        unsigned char buf;
        int board;
-       struct tuner_setup tun_setup;
-       tun_setup.config = 0;
-       tun_setup.tuner_callback = saa7134_tuner_callback;
+
+       dev->tuner_type = saa7134_boards[dev->board].tuner_type;
+       dev->tuner_addr = saa7134_boards[dev->board].tuner_addr;
 
        switch (dev->board) {
        case SAA7134_BOARD_BMK_MPEX_NOTUNER:
        case SAA7134_BOARD_BMK_MPEX_TUNER:
                dev->i2c_client.addr = 0x60;
-               board = (i2c_master_recv(&dev->i2c_client,&buf,0) < 0)
+               board = (i2c_master_recv(&dev->i2c_client, &buf, 0) < 0)
                        ? SAA7134_BOARD_BMK_MPEX_NOTUNER
                        : SAA7134_BOARD_BMK_MPEX_TUNER;
                if (board == dev->board)
@@ -5600,21 +5670,9 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                saa7134_boards[dev->board].name);
                dev->tuner_type = saa7134_boards[dev->board].tuner_type;
 
-               if (TUNER_ABSENT != dev->tuner_type) {
-                       tun_setup.mode_mask = T_RADIO     |
-                                             T_ANALOG_TV |
-                                             T_DIGITAL_TV;
-                       tun_setup.type = dev->tuner_type;
-                       tun_setup.addr = ADDR_UNSET;
-                       tun_setup.tuner_callback = saa7134_tuner_callback;
-
-                       saa7134_i2c_call_clients(dev,
-                                                TUNER_SET_TYPE_ADDR,
-                                                &tun_setup);
-               }
                break;
        case SAA7134_BOARD_MD7134:
-               {
+       {
                u8 subaddr;
                u8 data[3];
                int ret, tuner_t;
@@ -5667,30 +5725,8 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                }
 
                printk(KERN_INFO "%s Tuner type is %d\n", dev->name, dev->tuner_type);
-               if (dev->tuner_type == TUNER_PHILIPS_FMD1216ME_MK3) {
-                       struct v4l2_priv_tun_config tda9887_cfg;
-
-                       tda9887_cfg.tuner = TUNER_TDA9887;
-                       tda9887_cfg.priv  = &dev->tda9887_conf;
-
-                       dev->tda9887_conf = TDA9887_PRESENT      |
-                                           TDA9887_PORT1_ACTIVE |
-                                           TDA9887_PORT2_ACTIVE;
-
-                       saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG,
-                                                &tda9887_cfg);
-               }
-
-               tun_setup.mode_mask = T_RADIO     |
-                                     T_ANALOG_TV |
-                                     T_DIGITAL_TV;
-               tun_setup.type = dev->tuner_type;
-               tun_setup.addr = ADDR_UNSET;
-
-               saa7134_i2c_call_clients(dev,
-                                        TUNER_SET_TYPE_ADDR, &tun_setup);
-               }
                break;
+       }
        case SAA7134_BOARD_PHILIPS_EUROPA:
                if (dev->autodetected && (dev->eedata[0x41] == 0x1c)) {
                        /* Reconfigure board as Snake reference design */
@@ -5702,43 +5738,43 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                }
        case SAA7134_BOARD_VIDEOMATE_DVBT_300:
        case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
+       {
+
                /* The Philips EUROPA based hybrid boards have the tuner connected through
                 * the channel decoder. We have to make it transparent to find it
                 */
-               {
                u8 data[] = { 0x07, 0x02};
                struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
                i2c_transfer(&dev->i2c_adap, &msg, 1);
 
-               tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
-               tun_setup.type = dev->tuner_type;
-               tun_setup.addr = dev->tuner_addr;
-
-               saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup);
-               }
                break;
+       }
        case SAA7134_BOARD_PHILIPS_TIGER:
        case SAA7134_BOARD_PHILIPS_TIGER_S:
-               {
+       {
                u8 data[] = { 0x3c, 0x33, 0x60};
                struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
-               if(dev->autodetected && (dev->eedata[0x49] == 0x50)) {
+               if (dev->autodetected && (dev->eedata[0x49] == 0x50)) {
                        dev->board = SAA7134_BOARD_PHILIPS_TIGER_S;
                        printk(KERN_INFO "%s: Reconfigured board as %s\n",
                                dev->name, saa7134_boards[dev->board].name);
                }
-               if(dev->board == SAA7134_BOARD_PHILIPS_TIGER_S) {
-                       tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
-                       tun_setup.type = TUNER_PHILIPS_TDA8290;
-                       tun_setup.addr = 0x4b;
-                       tun_setup.config = 2;
+               if (dev->board == SAA7134_BOARD_PHILIPS_TIGER_S) {
+                       dev->tuner_type = TUNER_PHILIPS_TDA8290;
+
+                       saa7134_tuner_setup(dev);
 
-                       saa7134_i2c_call_clients (dev, TUNER_SET_TYPE_ADDR,&tun_setup);
                        data[2] = 0x68;
+                       i2c_transfer(&dev->i2c_adap, &msg, 1);
+
+                       /* Tuner setup is handled before I2C transfer.
+                          Due to that, there's no need to do it later
+                        */
+                       return 0;
                }
                i2c_transfer(&dev->i2c_adap, &msg, 1);
-               }
                break;
+       }
        case SAA7134_BOARD_HAUPPAUGE_HVR1110:
                hauppauge_eeprom(dev, dev->eedata+0x80);
                /* break intentionally omitted */
@@ -5751,52 +5787,55 @@ int saa7134_board_init2(struct saa7134_dev *dev)
        case SAA7134_BOARD_AVERMEDIA_SUPER_007:
        case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
        case SAA7134_BOARD_CREATIX_CTX953:
+       {
                /* this is a hybrid board, initialize to analog mode
                 * and configure firmware eeprom address
                 */
-               {
                u8 data[] = { 0x3c, 0x33, 0x60};
                struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
                i2c_transfer(&dev->i2c_adap, &msg, 1);
-               }
                break;
+       }
        case SAA7134_BOARD_FLYDVB_TRIO:
-               {
+       {
                u8 data[] = { 0x3c, 0x33, 0x62};
                struct i2c_msg msg = {.addr=0x09, .flags=0, .buf=data, .len = sizeof(data)};
                i2c_transfer(&dev->i2c_adap, &msg, 1);
-               }
                break;
+       }
        case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
        case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
+       {
                /* initialize analog mode  */
-               {
                u8 data[] = { 0x3c, 0x33, 0x6a};
                struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
                i2c_transfer(&dev->i2c_adap, &msg, 1);
-               }
                break;
+       }
        case SAA7134_BOARD_CINERGY_HT_PCMCIA:
        case SAA7134_BOARD_CINERGY_HT_PCI:
+       {
                /* initialize analog mode */
-               {
                u8 data[] = { 0x3c, 0x33, 0x68};
                struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
                i2c_transfer(&dev->i2c_adap, &msg, 1);
-               }
                break;
+       }
        case SAA7134_BOARD_KWORLD_ATSC110:
-               {
-                       /* enable tuner */
-                       int i;
-                       static const u8 buffer [] = { 0x10,0x12,0x13,0x04,0x16,0x00,0x14,0x04,0x017,0x00 };
-                       dev->i2c_client.addr = 0x0a;
-                       for (i = 0; i < 5; i++)
-                               if (2 != i2c_master_send(&dev->i2c_client,&buffer[i*2],2))
-                                       printk(KERN_WARNING "%s: Unable to enable tuner(%i).\n",
-                                              dev->name, i);
-               }
+       {
+               /* enable tuner */
+               int i;
+               static const u8 buffer [] = { 0x10, 0x12, 0x13, 0x04, 0x16,
+                                             0x00, 0x14, 0x04, 0x17, 0x00 };
+               dev->i2c_client.addr = 0x0a;
+               for (i = 0; i < 5; i++)
+                       if (2 != i2c_master_send(&dev->i2c_client,
+                                                &buffer[i*2], 2))
+                               printk(KERN_WARNING
+                                      "%s: Unable to enable tuner(%i).\n",
+                                      dev->name, i);
                break;
+       }
        case SAA7134_BOARD_VIDEOMATE_DVBT_200:
        case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
                /* The T200 and the T200A share the same pci id.  Consequently,
@@ -5821,7 +5860,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                }
                break;
        case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM:
-               {
+       {
                struct v4l2_priv_tun_config tea5767_cfg;
                struct tea5767_ctrl ctl;
 
@@ -5832,34 +5871,11 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                tea5767_cfg.tuner = TUNER_TEA5767;
                tea5767_cfg.priv  = &ctl;
                saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &tea5767_cfg);
-               }
                break;
        }
+       } /* switch() */
 
-       if (dev->tuner_type == TUNER_XC2028) {
-               struct v4l2_priv_tun_config  xc2028_cfg;
-               struct xc2028_ctrl           ctl;
-
-               memset(&xc2028_cfg, 0, sizeof(ctl));
-               memset(&ctl, 0, sizeof(ctl));
-
-               ctl.fname   = XC2028_DEFAULT_FIRMWARE;
-               ctl.max_len = 64;
-
-               switch (dev->board) {
-               case SAA7134_BOARD_AVERMEDIA_A16D:
-                       ctl.demod = XC3028_FE_ZARLINK456;
-                       break;
-               default:
-                       ctl.demod = XC3028_FE_OREN538;
-                       ctl.mts = 1;
-               }
-
-               xc2028_cfg.tuner = TUNER_XC2028;
-               xc2028_cfg.priv  = &ctl;
-
-               saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
-       }
+       saa7134_tuner_setup(dev);
 
        return 0;
 }
index 2ccfaba0c490bfc6d42da43722a8ab6f665d42c9..d8af3863f2d3de675492e34d8a84ec2269d1e5ff 100644 (file)
@@ -324,8 +324,6 @@ static u32 functionality(struct i2c_adapter *adap)
 static int attach_inform(struct i2c_client *client)
 {
        struct saa7134_dev *dev = client->adapter->algo_data;
-       int tuner = dev->tuner_type;
-       struct tuner_setup tun_setup;
 
        d1printk( "%s i2c attach [addr=0x%x,client=%s]\n",
                client->driver->driver.name, client->addr, client->name);
@@ -346,46 +344,6 @@ static int attach_inform(struct i2c_client *client)
                }
        }
 
-       if (!client->driver->command)
-               return 0;
-
-       if (saa7134_boards[dev->board].radio_type != UNSET) {
-
-               tun_setup.type = saa7134_boards[dev->board].radio_type;
-               tun_setup.addr = saa7134_boards[dev->board].radio_addr;
-
-               if ((tun_setup.addr == ADDR_UNSET) || (tun_setup.addr == client->addr)) {
-                       tun_setup.mode_mask = T_RADIO;
-
-                       client->driver->command(client, TUNER_SET_TYPE_ADDR, &tun_setup);
-               }
-       }
-
-       if (tuner != UNSET) {
-               tun_setup.type = tuner;
-               tun_setup.addr = saa7134_boards[dev->board].tuner_addr;
-               tun_setup.config = saa7134_boards[dev->board].tuner_config;
-               tun_setup.tuner_callback = saa7134_tuner_callback;
-
-               if ((tun_setup.addr == ADDR_UNSET)||(tun_setup.addr == client->addr)) {
-
-                       tun_setup.mode_mask = T_ANALOG_TV;
-
-                       client->driver->command(client,TUNER_SET_TYPE_ADDR, &tun_setup);
-               }
-
-               if (tuner == TUNER_TDA9887) {
-                       struct v4l2_priv_tun_config tda9887_cfg;
-
-                       tda9887_cfg.tuner = TUNER_TDA9887;
-                       tda9887_cfg.priv = &dev->tda9887_conf;
-
-                       client->driver->command(client, TUNER_SET_CONFIG,
-                                               &tda9887_cfg);
-               }
-       }
-
-
        return 0;
 }