ASM macro is never defined. rtrc in pas16.c is not used.
NCR5380_map_config, do_NCR5380_intr, do_t128_intr and do_pas16_intr
are unused. NCR_NOT_SET harms readability. Remove them.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
#define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */
#define FLAG_TAGGED_QUEUING 64 /* as X3T9.2 spelled it */
-#ifndef ASM
-
#ifdef SUPPORT_TAGS
struct tag_alloc {
DECLARE_BITMAP(allocated, MAX_TAGS);
#endif /* defined(i386) || defined(__alpha__) */
#endif /* defined(REAL_DMA) */
#endif /* __KERNEL__ */
-#endif /* ndef ASM */
#endif /* NCR5380_H */
#include <linux/delay.h>
#include <linux/interrupt.h>
-#define NCR_NOT_SET 0
-static int ncr_irq = NCR_NOT_SET;
-static int ncr_dma = NCR_NOT_SET;
-static int ncr_addr = NCR_NOT_SET;
-static int ncr_5380 = NCR_NOT_SET;
-static int ncr_53c400 = NCR_NOT_SET;
-static int ncr_53c400a = NCR_NOT_SET;
-static int dtc_3181e = NCR_NOT_SET;
+static int ncr_irq;
+static int ncr_dma;
+static int ncr_addr;
+static int ncr_5380;
+static int ncr_53c400;
+static int ncr_53c400a;
+static int dtc_3181e;
static struct override {
NCR5380_map_type NCR5380_map_name;
void __iomem *iomem;
#endif
- if (ncr_irq != NCR_NOT_SET)
+ if (ncr_irq)
overrides[0].irq = ncr_irq;
- if (ncr_dma != NCR_NOT_SET)
+ if (ncr_dma)
overrides[0].dma = ncr_dma;
- if (ncr_addr != NCR_NOT_SET)
+ if (ncr_addr)
overrides[0].NCR5380_map_name = (NCR5380_map_type) ncr_addr;
- if (ncr_5380 != NCR_NOT_SET)
+ if (ncr_5380)
overrides[0].board = BOARD_NCR5380;
- else if (ncr_53c400 != NCR_NOT_SET)
+ else if (ncr_53c400)
overrides[0].board = BOARD_NCR53C400;
- else if (ncr_53c400a != NCR_NOT_SET)
+ else if (ncr_53c400a)
overrides[0].board = BOARD_NCR53C400A;
- else if (dtc_3181e != NCR_NOT_SET)
+ else if (dtc_3181e)
overrides[0].board = BOARD_DTC3181E;
#ifndef SCSI_G_NCR5380_MEM
if (!current_override && isapnp_present()) {
#define NCR5380_BIOSPARAM NULL
#endif
-#ifndef ASM
-
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif
#ifndef SCSI_G_NCR5380_MEM
-#define NCR5380_map_config port
#define NCR5380_map_type int
#define NCR5380_map_name port
#define NCR5380_instance_name io_port
#else
/* therefore SCSI_G_NCR5380_MEM */
-#define NCR5380_map_config memory
#define NCR5380_map_type unsigned long
#define NCR5380_map_name base
#define NCR5380_instance_name base
#define BOARD_NCR53C400A 2
#define BOARD_DTC3181E 3
-#endif /* ndef ASM */
#endif /* GENERIC_NCR5380_H */
* START_DMA_INITIATOR_RECEIVE_REG wo
*/
};
-/*----------------------------------------------------------------*/
-/* the following will set the monitor border color (useful to find
- where something crashed or gets stuck at */
-/* 1 = blue
- 2 = green
- 3 = cyan
- 4 = red
- 5 = magenta
- 6 = yellow
- 7 = white
-*/
-#if 1
-#define rtrc(i) {inb(0x3da); outb(0x31, 0x3c0); outb((i), 0x3c0);}
-#else
-#define rtrc(i) {}
-#endif
/*
#define OPERATION_MODE_1 0xec03
#define IO_CONFIG_3 0xf002
-
-#ifndef ASM
-
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif
#define NCR5380_write(reg, value) ( outb((value),PAS16_io_port(reg)) )
#define NCR5380_intr pas16_intr
-#define do_NCR5380_intr do_pas16_intr
#define NCR5380_queue_command pas16_queue_command
#define NCR5380_abort pas16_abort
#define NCR5380_bus_reset pas16_bus_reset
#define PAS16_IRQS 0xd4a8
-#endif /* ndef ASM */
#endif /* PAS16_H */
#define T_DATA_REG_OFFSET 0x1e00 /* rw 512 bytes long */
-#ifndef ASM
-
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif
#define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))
#define NCR5380_intr t128_intr
-#define do_NCR5380_intr do_t128_intr
#define NCR5380_queue_command t128_queue_command
#define NCR5380_abort t128_abort
#define NCR5380_bus_reset t128_bus_reset
#define T128_IRQS 0xc4a8
-#endif /* ndef ASM */
#endif /* T128_H */