bnx2x: Fix namespace collision with FLOW_CTRL_{TX,RX}

These are now defined in linux/mii.h and the bnx2x driver
defines different values which are shared with hardware
data structures.

So add a "BNX2X_" prefix to these macro names.

Based upon a report from Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 4ce7fe9c5251143745985b70cb449df9f394edfd..67de94f1f30e10c38beee7cfc0e3bdf2a5715962 100644 (file)
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -289,7 +289,7 @@ static u8 bnx2x_emac_enable(struct link_params *params,
                /* pause enable/disable */
                bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE,
                               EMAC_RX_MODE_FLOW_EN);
-               if (vars->flow_ctrl & FLOW_CTRL_RX)
+               if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
                        bnx2x_bits_en(bp, emac_base +
                                    EMAC_REG_EMAC_RX_MODE,
                                    EMAC_RX_MODE_FLOW_EN);
@@ -297,7 +297,7 @@ static u8 bnx2x_emac_enable(struct link_params *params,
                bnx2x_bits_dis(bp,  emac_base + EMAC_REG_EMAC_TX_MODE,
                             (EMAC_TX_MODE_EXT_PAUSE_EN |
                              EMAC_TX_MODE_FLOW_EN));
-               if (vars->flow_ctrl & FLOW_CTRL_TX)
+               if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
                        bnx2x_bits_en(bp, emac_base +
                                    EMAC_REG_EMAC_TX_MODE,
                                   (EMAC_TX_MODE_EXT_PAUSE_EN |
@@ -333,7 +333,7 @@ static u8 bnx2x_emac_enable(struct link_params *params,
        /* enable the NIG in/out to the emac */
        REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x1);
        val = 0;
-       if (vars->flow_ctrl & FLOW_CTRL_TX)
+       if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
                val = 1;
 
        REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val);
@@ -396,7 +396,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars,
 
        /* tx control */
        val = 0xc0;
-       if (vars->flow_ctrl & FLOW_CTRL_TX)
+       if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
                val |= 0x800000;
        wb_data[0] = val;
        wb_data[1] = 0;
@@ -423,7 +423,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars,
 
        /* rx control set to don't strip crc */
        val = 0x14;
-       if (vars->flow_ctrl & FLOW_CTRL_RX)
+       if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
                val |= 0x20;
        wb_data[0] = val;
        wb_data[1] = 0;
@@ -460,7 +460,7 @@ static u8 bnx2x_bmac_enable(struct link_params *params, struct link_vars *vars,
        REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0);
        REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0);
        val = 0;
-       if (vars->flow_ctrl & FLOW_CTRL_TX)
+       if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
                val = 1;
        REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val);
        REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0);
@@ -580,14 +580,14 @@ void bnx2x_link_status_update(struct link_params *params,
                }
 
                if (vars->link_status & LINK_STATUS_TX_FLOW_CONTROL_ENABLED)
-                       vars->flow_ctrl |= FLOW_CTRL_TX;
+                       vars->flow_ctrl |= BNX2X_FLOW_CTRL_TX;
                else
-                       vars->flow_ctrl &= ~FLOW_CTRL_TX;
+                       vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_TX;
 
                if (vars->link_status & LINK_STATUS_RX_FLOW_CONTROL_ENABLED)
-                       vars->flow_ctrl |= FLOW_CTRL_RX;
+                       vars->flow_ctrl |= BNX2X_FLOW_CTRL_RX;
                else
-                       vars->flow_ctrl &= ~FLOW_CTRL_RX;
+                       vars->flow_ctrl &= ~BNX2X_FLOW_CTRL_RX;
 
                if (vars->phy_flags & PHY_XGXS_FLAG) {
                        if (vars->line_speed &&
@@ -618,7 +618,7 @@ void bnx2x_link_status_update(struct link_params *params,
 
                vars->line_speed = 0;
                vars->duplex = DUPLEX_FULL;
-               vars->flow_ctrl = FLOW_CTRL_NONE;
+               vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
 
                /* indicate no mac active */
                vars->mac_type = MAC_TYPE_NONE;
@@ -691,7 +691,7 @@ static u8 bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl,
                return -EINVAL;
        }
 
-       if (flow_ctrl & FLOW_CTRL_RX ||
+       if (flow_ctrl & BNX2X_FLOW_CTRL_RX ||
            line_speed == SPEED_10 ||
            line_speed == SPEED_100 ||
            line_speed == SPEED_1000 ||
@@ -1300,8 +1300,8 @@ static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc)
         * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
 
        switch (params->req_flow_ctrl) {
-       case FLOW_CTRL_AUTO:
-               if (params->req_fc_auto_adv == FLOW_CTRL_BOTH) {
+       case BNX2X_FLOW_CTRL_AUTO:
+               if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) {
                        *ieee_fc |=
                             MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
                } else {
@@ -1309,17 +1309,17 @@ static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc)
                       MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
                }
                break;
-       case FLOW_CTRL_TX:
+       case BNX2X_FLOW_CTRL_TX:
                *ieee_fc |=
                       MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC;
                break;
 
-       case FLOW_CTRL_RX:
-       case FLOW_CTRL_BOTH:
+       case BNX2X_FLOW_CTRL_RX:
+       case BNX2X_FLOW_CTRL_BOTH:
                *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH;
                break;
 
-       case FLOW_CTRL_NONE:
+       case BNX2X_FLOW_CTRL_NONE:
        default:
                *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
                break;
@@ -1463,18 +1463,18 @@ static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result)
 {                                              /*  LD      LP   */
        switch (pause_result) {                 /* ASYM P ASYM P */
        case 0xb:                               /*   1  0   1  1 */
-               vars->flow_ctrl = FLOW_CTRL_TX;
+               vars->flow_ctrl = BNX2X_FLOW_CTRL_TX;
                break;
 
        case 0xe:                               /*   1  1   1  0 */
-               vars->flow_ctrl = FLOW_CTRL_RX;
+               vars->flow_ctrl = BNX2X_FLOW_CTRL_RX;
                break;
 
        case 0x5:                               /*   0  1   0  1 */
        case 0x7:                               /*   0  1   1  1 */
        case 0xd:                               /*   1  1   0  1 */
        case 0xf:                               /*   1  1   1  1 */
-               vars->flow_ctrl = FLOW_CTRL_BOTH;
+               vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH;
                break;
 
        default:
@@ -1531,7 +1531,7 @@ static u8 bnx2x_ext_phy_resove_fc(struct link_params *params,
                DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x \n",
                   pause_result);
                bnx2x_pause_resolve(vars, pause_result);
-               if (vars->flow_ctrl == FLOW_CTRL_NONE &&
+               if (vars->flow_ctrl == BNX2X_FLOW_CTRL_NONE &&
                     ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073) {
                        bnx2x_cl45_read(bp, port,
                                      ext_phy_type,
@@ -1567,10 +1567,10 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params,
        u16 lp_pause;   /* link partner */
        u16 pause_result;
 
-       vars->flow_ctrl = FLOW_CTRL_NONE;
+       vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
 
        /* resolve from gp_status in case of AN complete and not sgmii */
-       if ((params->req_flow_ctrl == FLOW_CTRL_AUTO) &&
+       if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
            (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) &&
            (!(vars->phy_flags & PHY_SGMII_FLAG)) &&
            (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
@@ -1591,11 +1591,11 @@ static void bnx2x_flow_ctrl_resolve(struct link_params *params,
                                 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
                DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result);
                bnx2x_pause_resolve(vars, pause_result);
-       } else if ((params->req_flow_ctrl == FLOW_CTRL_AUTO) &&
+       } else if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
                   (bnx2x_ext_phy_resove_fc(params, vars))) {
                return;
        } else {
-               if (params->req_flow_ctrl == FLOW_CTRL_AUTO)
+               if (params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO)
                        vars->flow_ctrl = params->req_fc_auto_adv;
                else
                        vars->flow_ctrl = params->req_flow_ctrl;
@@ -1728,11 +1728,11 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
                                LINK_STATUS_PARALLEL_DETECTION_USED;
 
                }
-               if (vars->flow_ctrl & FLOW_CTRL_TX)
+               if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
                        vars->link_status |=
                                LINK_STATUS_TX_FLOW_CONTROL_ENABLED;
 
-               if (vars->flow_ctrl & FLOW_CTRL_RX)
+               if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
                        vars->link_status |=
                                LINK_STATUS_RX_FLOW_CONTROL_ENABLED;
 
@@ -1742,7 +1742,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params,
                vars->phy_link_up = 0;
 
                vars->duplex = DUPLEX_FULL;
-               vars->flow_ctrl = FLOW_CTRL_NONE;
+               vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
                vars->autoneg = AUTO_NEG_DISABLED;
                vars->mac_type = MAC_TYPE_NONE;
        }
@@ -3924,7 +3924,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
        vars->link_up = 0;
        vars->line_speed = 0;
        vars->duplex = DUPLEX_FULL;
-       vars->flow_ctrl = FLOW_CTRL_NONE;
+       vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
        vars->mac_type = MAC_TYPE_NONE;
 
        if (params->switch_cfg ==  SWITCH_CFG_1G)
@@ -3946,12 +3946,12 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
                vars->link_up = 1;
                vars->line_speed = SPEED_10000;
                vars->duplex = DUPLEX_FULL;
-               vars->flow_ctrl = FLOW_CTRL_NONE;
+               vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
                vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD);
                /* enable on E1.5 FPGA */
                if (CHIP_IS_E1H(bp)) {
                        vars->flow_ctrl |=
-                               (FLOW_CTRL_TX | FLOW_CTRL_RX);
+                               (BNX2X_FLOW_CTRL_TX | BNX2X_FLOW_CTRL_RX);
                        vars->link_status |=
                                        (LINK_STATUS_TX_FLOW_CONTROL_ENABLED |
                                         LINK_STATUS_RX_FLOW_CONTROL_ENABLED);
@@ -3974,7 +3974,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
                vars->link_up = 1;
                vars->line_speed = SPEED_10000;
                vars->duplex = DUPLEX_FULL;
-               vars->flow_ctrl = FLOW_CTRL_NONE;
+               vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
                vars->link_status = (LINK_STATUS_LINK_UP | LINK_10GTFD);
 
                bnx2x_bmac_enable(params, vars, 0);
@@ -3994,7 +3994,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
                vars->link_up = 1;
                vars->line_speed = SPEED_10000;
                vars->duplex = DUPLEX_FULL;
-               vars->flow_ctrl = FLOW_CTRL_NONE;
+               vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
                vars->mac_type = MAC_TYPE_BMAC;
 
                vars->phy_flags = PHY_XGXS_FLAG;
@@ -4009,7 +4009,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
                vars->link_up = 1;
                vars->line_speed = SPEED_1000;
                vars->duplex = DUPLEX_FULL;
-               vars->flow_ctrl = FLOW_CTRL_NONE;
+               vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
                vars->mac_type = MAC_TYPE_EMAC;
 
                vars->phy_flags = PHY_XGXS_FLAG;
@@ -4026,7 +4026,7 @@ u8 bnx2x_phy_init(struct link_params *params, struct link_vars *vars)
                vars->link_up = 1;
                vars->line_speed = SPEED_10000;
                vars->duplex = DUPLEX_FULL;
-               vars->flow_ctrl = FLOW_CTRL_NONE;
+               vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE;
 
                vars->phy_flags = PHY_XGXS_FLAG;
 

diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h
index 86d54a17b41127c7bcb278d7e3b971305c6a3b27..47cb585f4278a8680b0eba010eeb8f145d040b8d 100644 (file)
--- a/drivers/net/bnx2x_link.h
+++ b/drivers/net/bnx2x_link.h
@@ -26,11 +26,11 @@
 
 
 
-#define FLOW_CTRL_AUTO         PORT_FEATURE_FLOW_CONTROL_AUTO
-#define FLOW_CTRL_TX           PORT_FEATURE_FLOW_CONTROL_TX
-#define FLOW_CTRL_RX           PORT_FEATURE_FLOW_CONTROL_RX
-#define FLOW_CTRL_BOTH         PORT_FEATURE_FLOW_CONTROL_BOTH
-#define FLOW_CTRL_NONE         PORT_FEATURE_FLOW_CONTROL_NONE
+#define BNX2X_FLOW_CTRL_AUTO           PORT_FEATURE_FLOW_CONTROL_AUTO
+#define BNX2X_FLOW_CTRL_TX             PORT_FEATURE_FLOW_CONTROL_TX
+#define BNX2X_FLOW_CTRL_RX             PORT_FEATURE_FLOW_CONTROL_RX
+#define BNX2X_FLOW_CTRL_BOTH           PORT_FEATURE_FLOW_CONTROL_BOTH
+#define BNX2X_FLOW_CTRL_NONE           PORT_FEATURE_FLOW_CONTROL_NONE
 
 #define SPEED_AUTO_NEG     0
 #define SPEED_12000            12000

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index a9c4de0d202008c5b438de13c6f28c5fd51d5d68..24d2ae8b74bf1c522fc52efc86b4bd647c3457b6 100644 (file)
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -1921,10 +1921,10 @@ static void bnx2x_link_report(struct bnx2x *bp)
                else
                        printk("half duplex");
 
-               if (bp->link_vars.flow_ctrl != FLOW_CTRL_NONE) {
-                       if (bp->link_vars.flow_ctrl & FLOW_CTRL_RX) {
+               if (bp->link_vars.flow_ctrl != BNX2X_FLOW_CTRL_NONE) {
+                       if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) {
                                printk(", receive ");
-                               if (bp->link_vars.flow_ctrl & FLOW_CTRL_TX)
+                               if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
                                        printk("& transmit ");
                        } else {
                                printk(", transmit ");
@@ -1948,11 +1948,11 @@ static u8 bnx2x_initial_phy_init(struct bnx2x *bp)
                /* It is recommended to turn off RX FC for jumbo frames
                   for better performance */
                if (IS_E1HMF(bp))
-                       bp->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH;
+                       bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
                else if (bp->dev->mtu > 5000)
-                       bp->link_params.req_fc_auto_adv = FLOW_CTRL_TX;
+                       bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_TX;
                else
-                       bp->link_params.req_fc_auto_adv = FLOW_CTRL_BOTH;
+                       bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_BOTH;
 
                bnx2x_acquire_phy_lock(bp);
                rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
@@ -7362,9 +7362,9 @@ static void __devinit bnx2x_link_settings_requested(struct bnx2x *bp)
 
        bp->link_params.req_flow_ctrl = (bp->port.link_config &
                                         PORT_FEATURE_FLOW_CONTROL_MASK);
-       if ((bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) &&
+       if ((bp->link_params.req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
            !(bp->port.supported & SUPPORTED_Autoneg))
-               bp->link_params.req_flow_ctrl = FLOW_CTRL_NONE;
+               bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_NONE;
 
        BNX2X_DEV_INFO("req_line_speed %d  req_duplex %d  req_flow_ctrl 0x%x"
                       "  advertising 0x%x\n",
@@ -8353,13 +8353,13 @@ static void bnx2x_get_pauseparam(struct net_device *dev,
 {
        struct bnx2x *bp = netdev_priv(dev);
 
-       epause->autoneg = (bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO) &&
+       epause->autoneg = (bp->link_params.req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
                          (bp->link_params.req_line_speed == SPEED_AUTO_NEG);
 
-       epause->rx_pause = ((bp->link_vars.flow_ctrl & FLOW_CTRL_RX) ==
-                           FLOW_CTRL_RX);
-       epause->tx_pause = ((bp->link_vars.flow_ctrl & FLOW_CTRL_TX) ==
-                           FLOW_CTRL_TX);
+       epause->rx_pause = ((bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) ==
+                           BNX2X_FLOW_CTRL_RX);
+       epause->tx_pause = ((bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) ==
+                           BNX2X_FLOW_CTRL_TX);
 
        DP(NETIF_MSG_LINK, "ethtool_pauseparam: cmd %d\n"
           DP_LEVEL "  autoneg %d  rx_pause %d  tx_pause %d\n",
@@ -8378,16 +8378,16 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
           DP_LEVEL "  autoneg %d  rx_pause %d  tx_pause %d\n",
           epause->cmd, epause->autoneg, epause->rx_pause, epause->tx_pause);
 
-       bp->link_params.req_flow_ctrl = FLOW_CTRL_AUTO;
+       bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_AUTO;
 
        if (epause->rx_pause)
-               bp->link_params.req_flow_ctrl |= FLOW_CTRL_RX;
+               bp->link_params.req_flow_ctrl |= BNX2X_FLOW_CTRL_RX;
 
        if (epause->tx_pause)
-               bp->link_params.req_flow_ctrl |= FLOW_CTRL_TX;
+               bp->link_params.req_flow_ctrl |= BNX2X_FLOW_CTRL_TX;
 
-       if (bp->link_params.req_flow_ctrl == FLOW_CTRL_AUTO)
-               bp->link_params.req_flow_ctrl = FLOW_CTRL_NONE;
+       if (bp->link_params.req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO)
+               bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_NONE;
 
        if (epause->autoneg) {
                if (!(bp->port.supported & SUPPORTED_Autoneg)) {
@@ -8396,7 +8396,7 @@ static int bnx2x_set_pauseparam(struct net_device *dev,
                }
 
                if (bp->link_params.req_line_speed == SPEED_AUTO_NEG)
-                       bp->link_params.req_flow_ctrl = FLOW_CTRL_AUTO;
+                       bp->link_params.req_flow_ctrl = BNX2X_FLOW_CTRL_AUTO;
        }
 
        DP(NETIF_MSG_LINK,