OMAP4: 4430SDP: Add picodlp support to board file
authorTomi Valkeinen <tomi.valkeinen@ti.com>
Wed, 3 Aug 2011 11:39:09 +0000 (14:39 +0300)
committerTomi Valkeinen <tomi.valkeinen@ti.com>
Fri, 30 Sep 2011 13:17:45 +0000 (16:17 +0300)
An on-board projector named picodlp is available for OMAP4430 SDP.

Entry for this picodlp as a panel is being added in dss_devices array to
the board file.  It needs 4 GPIO pins for interfacing with host
processor and these are defined and two of them are configured in board
file.  Two GPIOs power_on and display_select are configured here.
picodlp also needs an i2c client over i2c controller-2 at address 0x1b.

Signed-off-by: Mayuresh Janorkar <mayur@ti.com>
Signed-off-by: Mythri P K <mythripk@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
arch/arm/mach-omap2/board-4430sdp.c

index 187fcae14ffffae8cad30f8cee58115680266d9b..d3874a68b059b382fe64caae0482da155d00fdcc 100644 (file)
@@ -39,6 +39,7 @@
 #include <plat/omap4-keypad.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-nokia-dsi.h>
+#include <video/omap-panel-picodlp.h>
 #include <linux/wl12xx.h>
 
 #include "mux.h"
@@ -54,6 +55,7 @@
 #define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
 #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
 #define DISPLAY_SEL_GPIO       59      /* LCD2/PicoDLP switch */
+#define DLP_POWER_ON_GPIO      40
 
 #define GPIO_WIFI_PMENA                54
 #define GPIO_WIFI_IRQ          53
@@ -758,10 +760,59 @@ static struct omap_dss_device sdp4430_hdmi_device = {
        .channel = OMAP_DSS_CHANNEL_DIGIT,
 };
 
+static struct picodlp_panel_data sdp4430_picodlp_pdata = {
+       .picodlp_adapter_id     = 2,
+       .emu_done_gpio          = 44,
+       .pwrgood_gpio           = 45,
+};
+
+static void sdp4430_picodlp_init(void)
+{
+       int r;
+       const struct gpio picodlp_gpios[] = {
+               {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
+                       "DLP POWER ON"},
+               {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
+                       "DLP EMU DONE"},
+               {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
+                       "DLP PWRGOOD"},
+       };
+
+       r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
+       if (r)
+               pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
+}
+
+static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
+{
+       gpio_set_value(DISPLAY_SEL_GPIO, 0);
+       gpio_set_value(DLP_POWER_ON_GPIO, 1);
+
+       return 0;
+}
+
+static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
+{
+       gpio_set_value(DLP_POWER_ON_GPIO, 0);
+       gpio_set_value(DISPLAY_SEL_GPIO, 1);
+}
+
+static struct omap_dss_device sdp4430_picodlp_device = {
+       .name                   = "picodlp",
+       .driver_name            = "picodlp_panel",
+       .type                   = OMAP_DISPLAY_TYPE_DPI,
+       .phy.dpi.data_lines     = 24,
+       .channel                = OMAP_DSS_CHANNEL_LCD2,
+       .platform_enable        = sdp4430_panel_enable_picodlp,
+       .platform_disable       = sdp4430_panel_disable_picodlp,
+       .data                   = &sdp4430_picodlp_pdata,
+};
+
 static struct omap_dss_device *sdp4430_dss_devices[] = {
        &sdp4430_lcd_device,
        &sdp4430_lcd2_device,
        &sdp4430_hdmi_device,
+       &sdp4430_picodlp_device,
 };
 
 static struct omap_dss_board_info sdp4430_dss_data = {
@@ -782,6 +833,7 @@ static void omap_4430sdp_display_init(void)
 
        sdp4430_lcd_init();
        sdp4430_hdmi_mux_init();
+       sdp4430_picodlp_init();
        omap_display_init(&sdp4430_dss_data);
 }