[ISDN] Remove CONFIG_PCI ifdefs from 100% PCI source code

Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
index 6339bb443f624e56f4fbfe97b3f400d968e5d8ac..99ef3b43fcd79ebf276dfcd6ce48c0b60f80433f 100644 (file)
--- a/drivers/isdn/hisax/bkm_a8.c
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -20,8 +20,6 @@
 #include <linux/pci.h>
 #include "bkm_ax.h"
 
-#ifdef CONFIG_PCI
-
 #define        ATTEMPT_PCI_REMAPPING   /* Required for PLX rev 1 */
 
 extern const char *CardType[];
@@ -279,12 +277,9 @@ static u_char pci_bus __devinitdata = 0;
 static u_char pci_device_fn __devinitdata = 0;
 static u_char pci_irq __devinitdata = 0;
 
-#endif /* CONFIG_PCI */
-
 int __devinit
 setup_sct_quadro(struct IsdnCard *card)
 {
-#ifdef CONFIG_PCI
        struct IsdnCardState *cs = card->cs;
        char tmp[64];
        u_int found = 0;
@@ -442,7 +437,4 @@ setup_sct_quadro(struct IsdnCard *card)
                sct_quadro_subtypes[cs->subtyp],
                readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
        return (1);
-#else
-       printk(KERN_ERR "HiSax: bkm_a8 only supported on PCI Systems\n");
-#endif /* CONFIG_PCI */
 }

diff --git a/drivers/isdn/hisax/telespci.c b/drivers/isdn/hisax/telespci.c
index d09f6d033f156c96c46a8411a5e41dc14c3abf88..4393003ae162b5d7a7bd83991c3d53909d0f894d 100644 (file)
--- a/drivers/isdn/hisax/telespci.c
+++ b/drivers/isdn/hisax/telespci.c
@@ -295,11 +295,12 @@ setup_telespci(struct IsdnCard *card)
 #ifdef __BIG_ENDIAN
 #error "not running on big endian machines now"
 #endif
+
        strcpy(tmp, telespci_revision);
        printk(KERN_INFO "HiSax: Teles/PCI driver Rev. %s\n", HiSax_getrev(tmp));
        if (cs->typ != ISDN_CTYPE_TELESPCI)
                return (0);
-#ifdef CONFIG_PCI
+
        if ((dev_tel = pci_find_device (PCI_VENDOR_ID_ZORAN, PCI_DEVICE_ID_ZORAN_36120, dev_tel))) {
                if (pci_enable_device(dev_tel))
                        return(0);
@@ -317,11 +318,6 @@ setup_telespci(struct IsdnCard *card)
                printk(KERN_WARNING "TelesPCI: No PCI card found\n");
                return(0);
        }
-#else
-       printk(KERN_WARNING "HiSax: Teles/PCI and NO_PCI_BIOS\n");
-       printk(KERN_WARNING "HiSax: Teles/PCI unable to config\n");
-       return (0);
-#endif /* CONFIG_PCI */
 
        /* Initialize Zoran PCI controller */
        writel(0x00000000, cs->hw.teles0.membase + 0x28);

diff --git a/drivers/isdn/hisax/w6692.c b/drivers/isdn/hisax/w6692.c
index 3aeceaf9769e5dc30a7cbefd30b4995082f8c7f6..39129b94f8be503340686e7122584dfa8a14021a 100644 (file)
--- a/drivers/isdn/hisax/w6692.c
+++ b/drivers/isdn/hisax/w6692.c
@@ -1009,7 +1009,7 @@ setup_w6692(struct IsdnCard *card)
        printk(KERN_INFO "HiSax: W6692 driver Rev. %s\n", HiSax_getrev(tmp));
        if (cs->typ != ISDN_CTYPE_W6692)
                return (0);
-#ifdef CONFIG_PCI
+
        while (id_list[id_idx].vendor_id) {
                dev_w6692 = pci_find_device(id_list[id_idx].vendor_id,
                                            id_list[id_idx].device_id,
@@ -1061,11 +1061,6 @@ setup_w6692(struct IsdnCard *card)
                       cs->hw.w6692.iobase + 255);
                return (0);
        }
-#else
-       printk(KERN_WARNING "HiSax: W6692 and NO_PCI_BIOS\n");
-       printk(KERN_WARNING "HiSax: W6692 unable to config\n");
-       return (0);
-#endif                         /* CONFIG_PCI */
 
        printk(KERN_INFO
               "HiSax: %s config irq:%d I/O:%x\n",