Input: synaptics-rmi4 - clean up F30 implementation
authorDmitry Torokhov <dmitry.torokhov@gmail.com>
Wed, 8 Feb 2017 20:02:07 +0000 (12:02 -0800)
committerDmitry Torokhov <dmitry.torokhov@gmail.com>
Thu, 9 Feb 2017 21:01:33 +0000 (13:01 -0800)
This patch does several cleanup changes to F30 code

- switch to using BIT() macro
- use DIV_ROUND_UP() where appropriate
- factor out code setting up and reporting buttons
- use single loop when reporting buttons: arithmetic is cheap compared to
  conditionals and associated branch misprediction.

Tested-By: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
drivers/input/rmi4/rmi_f30.c

index f4b491e3e0fd4486c2680fab77515d91abaec4aa..c5eb4d034e84c5290ab9ff9bc443f30032986047 100644 (file)
 
 /* Defs for Query 0 */
 #define RMI_F30_EXTENDED_PATTERNS              0x01
-#define RMI_F30_HAS_MAPPABLE_BUTTONS           (1 << 1)
-#define RMI_F30_HAS_LED                        (1 << 2)
-#define RMI_F30_HAS_GPIO                       (1 << 3)
-#define RMI_F30_HAS_HAPTIC                     (1 << 4)
-#define RMI_F30_HAS_GPIO_DRV_CTL               (1 << 5)
-#define RMI_F30_HAS_MECH_MOUSE_BTNS            (1 << 6)
+#define RMI_F30_HAS_MAPPABLE_BUTTONS           BIT(1)
+#define RMI_F30_HAS_LED                                BIT(2)
+#define RMI_F30_HAS_GPIO                       BIT(3)
+#define RMI_F30_HAS_HAPTIC                     BIT(4)
+#define RMI_F30_HAS_GPIO_DRV_CTL               BIT(5)
+#define RMI_F30_HAS_MECH_MOUSE_BTNS            BIT(6)
 
 /* Defs for Query 1 */
 #define RMI_F30_GPIO_LED_COUNT                 0x1F
 
 /* Defs for Control Registers */
 #define RMI_F30_CTRL_1_GPIO_DEBOUNCE           0x01
-#define RMI_F30_CTRL_1_HALT                    (1 << 4)
-#define RMI_F30_CTRL_1_HALTED                  (1 << 5)
+#define RMI_F30_CTRL_1_HALT                    BIT(4)
+#define RMI_F30_CTRL_1_HALTED                  BIT(5)
 #define RMI_F30_CTRL_10_NUM_MECH_MOUSE_BTNS    0x03
 
-struct rmi_f30_ctrl_data {
-       int address;
-       int length;
-       u8 *regs;
-};
-
 #define RMI_F30_CTRL_MAX_REGS          32
-#define RMI_F30_CTRL_MAX_BYTES         ((RMI_F30_CTRL_MAX_REGS + 7) >> 3)
+#define RMI_F30_CTRL_MAX_BYTES         DIV_ROUND_UP(RMI_F30_CTRL_MAX_REGS, 8)
 #define RMI_F30_CTRL_MAX_REG_BLOCKS    11
 
 #define RMI_F30_CTRL_REGS_MAX_SIZE (RMI_F30_CTRL_MAX_BYTES             \
@@ -54,6 +48,12 @@ struct rmi_f30_ctrl_data {
                                        + 1                             \
                                        + 1)
 
+struct rmi_f30_ctrl_data {
+       int address;
+       int length;
+       u8 *regs;
+};
+
 struct f30_data {
        /* Query Data */
        bool has_extended_pattern;
@@ -81,13 +81,13 @@ struct f30_data {
 static int rmi_f30_read_control_parameters(struct rmi_function *fn,
                                                struct f30_data *f30)
 {
-       struct rmi_device *rmi_dev = fn->rmi_dev;
-       int error = 0;
+       int error;
 
-       error = rmi_read_block(rmi_dev, fn->fd.control_base_addr,
-                               f30->ctrl_regs, f30->ctrl_regs_size);
+       error = rmi_read_block(fn->rmi_dev, fn->fd.control_base_addr,
+                              f30->ctrl_regs, f30->ctrl_regs_size);
        if (error) {
-               dev_err(&rmi_dev->dev, "%s : Could not read control registers at 0x%x error (%d)\n",
+               dev_err(&fn->dev,
+                       "%s: Could not read control registers at 0x%x: %d\n",
                        __func__, fn->fd.control_base_addr, error);
                return error;
        }
@@ -95,24 +95,32 @@ static int rmi_f30_read_control_parameters(struct rmi_function *fn,
        return 0;
 }
 
+static void rmi_f30_report_button(struct rmi_function *fn,
+                                 struct f30_data *f30, unsigned int button)
+{
+       unsigned int reg_num = button >> 3;
+       unsigned int bit_num = button & 0x07;
+       bool key_down = !(f30->data_regs[reg_num] & BIT(bit_num));
+
+       rmi_dbg(RMI_DEBUG_FN, &fn->dev,
+               "%s: call input report key (0x%04x) value (0x%02x)",
+               __func__, f30->gpioled_key_map[button], key_down);
+
+       input_report_key(f30->input, f30->gpioled_key_map[button], key_down);
+}
+
 static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
 {
        struct f30_data *f30 = dev_get_drvdata(&fn->dev);
-       struct rmi_device *rmi_dev = fn->rmi_dev;
-       struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
-       int retval;
-       int gpiled = 0;
-       int value = 0;
+       struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev);
+       int error;
        int i;
-       int reg_num;
-
-       if (!f30->input)
-               return 0;
 
        /* Read the gpi led data. */
        if (drvdata->attn_data.data) {
                if (drvdata->attn_data.size < f30->register_count) {
-                       dev_warn(&fn->dev, "F30 interrupted, but data is missing\n");
+                       dev_warn(&fn->dev,
+                                "F30 interrupted, but data is missing\n");
                        return 0;
                }
                memcpy(f30->data_regs, drvdata->attn_data.data,
@@ -120,72 +128,21 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
                drvdata->attn_data.data += f30->register_count;
                drvdata->attn_data.size -= f30->register_count;
        } else {
-               retval = rmi_read_block(rmi_dev, fn->fd.data_base_addr,
-                       f30->data_regs, f30->register_count);
-
-               if (retval) {
-                       dev_err(&fn->dev, "%s: Failed to read F30 data registers.\n",
-                               __func__);
-                       return retval;
-               }
-       }
-
-       for (reg_num = 0; reg_num < f30->register_count; ++reg_num) {
-               for (i = 0; gpiled < f30->gpioled_count && i < 8; ++i,
-                       ++gpiled) {
-                       if (f30->gpioled_key_map[gpiled] != 0) {
-                               /* buttons have pull up resistors */
-                               value = (((f30->data_regs[reg_num] >> i) & 0x01)
-                                                                       == 0);
-
-                               rmi_dbg(RMI_DEBUG_FN, &fn->dev,
-                                       "%s: call input report key (0x%04x) value (0x%02x)",
-                                       __func__,
-                                       f30->gpioled_key_map[gpiled], value);
-                               input_report_key(f30->input,
-                                                f30->gpioled_key_map[gpiled],
-                                                value);
-                       }
-
+               error = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr,
+                                      f30->data_regs, f30->register_count);
+               if (error) {
+                       dev_err(&fn->dev,
+                               "%s: Failed to read F30 data registers: %d\n",
+                               __func__, error);
+                       return error;
                }
        }
 
-       return 0;
-}
-
-static int rmi_f30_register_device(struct rmi_function *fn)
-{
-       int i;
-       struct rmi_device *rmi_dev = fn->rmi_dev;
-       struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
-       struct f30_data *f30 = dev_get_drvdata(&fn->dev);
-       struct input_dev *input_dev;
-       int button_count = 0;
-
-       input_dev = drv_data->input;
-       if (!input_dev) {
-               dev_info(&fn->dev, "F30: no input device found, ignoring.\n");
-               return -EINVAL;
-       }
-
-       f30->input = input_dev;
-
-       set_bit(EV_KEY, input_dev->evbit);
-
-       input_dev->keycode = f30->gpioled_key_map;
-       input_dev->keycodesize = sizeof(u16);
-       input_dev->keycodemax = f30->gpioled_count;
-
-       for (i = 0; i < f30->gpioled_count; i++) {
-               if (f30->gpioled_key_map[i] != 0) {
-                       input_set_capability(input_dev, EV_KEY,
-                                               f30->gpioled_key_map[i]);
-                       button_count++;
-               }
-       }
+       if (f30->has_gpio)
+               for (i = 0; i < f30->gpioled_count; i++)
+                       if (f30->gpioled_key_map[i] != KEY_RESERVED)
+                               rmi_f30_report_button(fn, f30, i);
 
-       if (button_count == 1)
-               __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
        return 0;
 }
 
@@ -204,19 +161,20 @@ static int rmi_f30_config(struct rmi_function *fn)
                error = rmi_write_block(fn->rmi_dev, fn->fd.control_base_addr,
                                        f30->ctrl_regs, f30->ctrl_regs_size);
                if (error) {
-                       dev_err(&fn->rmi_dev->dev,
-                               "%s : Could not write control registers at 0x%x error (%d)\n",
+                       dev_err(&fn->dev,
+                               "%s: Could not write control registers at 0x%x: %d\n",
                                __func__, fn->fd.control_base_addr, error);
                        return error;
                }
 
                drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
        }
+
        return 0;
 }
 
-static inline void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl,
-                                       int *ctrl_addr, int len, u8 **reg)
+static void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl,
+                                 int *ctrl_addr, int len, u8 **reg)
 {
        ctrl->address = *ctrl_addr;
        ctrl->length = len;
@@ -225,8 +183,7 @@ static inline void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl,
        *reg += len;
 }
 
-static inline bool rmi_f30_is_valid_button(int button,
-               struct rmi_f30_ctrl_data *ctrl)
+static bool rmi_f30_is_valid_button(int button, struct rmi_f30_ctrl_data *ctrl)
 {
        int byte_position = button >> 3;
        int bit_position = button & 0x07;
@@ -239,32 +196,60 @@ static inline bool rmi_f30_is_valid_button(int button,
                (ctrl[3].regs[byte_position] & BIT(bit_position));
 }
 
-static inline int rmi_f30_initialize(struct rmi_function *fn)
+static int rmi_f30_map_gpios(struct rmi_function *fn,
+                            struct f30_data *f30)
 {
-       struct f30_data *f30;
-       struct rmi_device *rmi_dev = fn->rmi_dev;
-       const struct rmi_device_platform_data *pdata;
-       int retval = 0;
-       int control_address;
+       const struct rmi_device_platform_data *pdata =
+                                       rmi_get_platform_data(fn->rmi_dev);
+       struct input_dev *input = f30->input;
+       unsigned int button = BTN_LEFT;
        int i;
-       int button;
-       u8 buf[RMI_F30_QUERY_SIZE];
-       u8 *ctrl_reg;
-       u8 *map_memory;
 
-       f30 = devm_kzalloc(&fn->dev, sizeof(struct f30_data),
-                          GFP_KERNEL);
-       if (!f30)
+       f30->gpioled_key_map = devm_kcalloc(&fn->dev,
+                                           f30->gpioled_count,
+                                           sizeof(f30->gpioled_key_map[0]),
+                                           GFP_KERNEL);
+       if (!f30->gpioled_key_map) {
+               dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n");
                return -ENOMEM;
+       }
 
-       dev_set_drvdata(&fn->dev, f30);
+       for (i = 0; i < f30->gpioled_count; i++) {
+               if (rmi_f30_is_valid_button(i, f30->ctrl)) {
+                       f30->gpioled_key_map[i] = button;
+                       input_set_capability(input, EV_KEY, button++);
+
+                       /*
+                        * buttonpad might be given by
+                        * f30->has_mech_mouse_btns, but I am
+                        * not sure, so use only the pdata info
+                        */
+                       if (pdata->f30_data.buttonpad) {
+                               __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+                               break;
+                       }
+               }
+       }
+
+       input->keycode = f30->gpioled_key_map;
+       input->keycodesize = sizeof(f30->gpioled_key_map[0]);
+       input->keycodemax = f30->gpioled_count;
+
+       return 0;
+}
 
-       retval = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr, buf,
-                               RMI_F30_QUERY_SIZE);
+static int rmi_f30_initialize(struct rmi_function *fn, struct f30_data *f30)
+{
+       u8 *ctrl_reg = f30->ctrl_regs;
+       int control_address = fn->fd.control_base_addr;
+       u8 buf[RMI_F30_QUERY_SIZE];
+       int error;
 
-       if (retval) {
-               dev_err(&fn->dev, "Failed to read query register.\n");
-               return retval;
+       error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
+                              buf, RMI_F30_QUERY_SIZE);
+       if (error) {
+               dev_err(&fn->dev, "Failed to read query register\n");
+               return error;
        }
 
        f30->has_extended_pattern = buf[0] & RMI_F30_EXTENDED_PATTERNS;
@@ -276,101 +261,71 @@ static inline int rmi_f30_initialize(struct rmi_function *fn)
        f30->has_mech_mouse_btns = buf[0] & RMI_F30_HAS_MECH_MOUSE_BTNS;
        f30->gpioled_count = buf[1] & RMI_F30_GPIO_LED_COUNT;
 
-       f30->register_count = (f30->gpioled_count + 7) >> 3;
-
-       control_address = fn->fd.control_base_addr;
-       ctrl_reg = f30->ctrl_regs;
+       f30->register_count = DIV_ROUND_UP(f30->gpioled_count, 8);
 
        if (f30->has_gpio && f30->has_led)
                rmi_f30_set_ctrl_data(&f30->ctrl[0], &control_address,
-                                       f30->register_count, &ctrl_reg);
+                                     f30->register_count, &ctrl_reg);
 
-       rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address, sizeof(u8),
-                               &ctrl_reg);
+       rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address,
+                             sizeof(u8), &ctrl_reg);
 
        if (f30->has_gpio) {
                rmi_f30_set_ctrl_data(&f30->ctrl[2], &control_address,
-                                       f30->register_count, &ctrl_reg);
+                                     f30->register_count, &ctrl_reg);
 
                rmi_f30_set_ctrl_data(&f30->ctrl[3], &control_address,
-                                       f30->register_count, &ctrl_reg);
+                                     f30->register_count, &ctrl_reg);
        }
 
        if (f30->has_led) {
-               int ctrl5_len;
-
                rmi_f30_set_ctrl_data(&f30->ctrl[4], &control_address,
-                                       f30->register_count, &ctrl_reg);
-
-               if (f30->has_extended_pattern)
-                       ctrl5_len = 6;
-               else
-                       ctrl5_len = 2;
+                                     f30->register_count, &ctrl_reg);
 
                rmi_f30_set_ctrl_data(&f30->ctrl[5], &control_address,
-                                       ctrl5_len, &ctrl_reg);
+                                     f30->has_extended_pattern ? 6 : 2,
+                                     &ctrl_reg);
        }
 
        if (f30->has_led || f30->has_gpio_driver_control) {
                /* control 6 uses a byte per gpio/led */
                rmi_f30_set_ctrl_data(&f30->ctrl[6], &control_address,
-                                       f30->gpioled_count, &ctrl_reg);
+                                     f30->gpioled_count, &ctrl_reg);
        }
 
        if (f30->has_mappable_buttons) {
                /* control 7 uses a byte per gpio/led */
                rmi_f30_set_ctrl_data(&f30->ctrl[7], &control_address,
-                                       f30->gpioled_count, &ctrl_reg);
+                                     f30->gpioled_count, &ctrl_reg);
        }
 
        if (f30->has_haptic) {
                rmi_f30_set_ctrl_data(&f30->ctrl[8], &control_address,
-                                       f30->register_count, &ctrl_reg);
+                                     f30->register_count, &ctrl_reg);
 
                rmi_f30_set_ctrl_data(&f30->ctrl[9], &control_address,
-                                       sizeof(u8), &ctrl_reg);
+                                     sizeof(u8), &ctrl_reg);
        }
 
        if (f30->has_mech_mouse_btns)
                rmi_f30_set_ctrl_data(&f30->ctrl[10], &control_address,
-                                       sizeof(u8), &ctrl_reg);
+                                     sizeof(u8), &ctrl_reg);
 
-       f30->ctrl_regs_size = ctrl_reg - f30->ctrl_regs
-                               ?: RMI_F30_CTRL_REGS_MAX_SIZE;
+       f30->ctrl_regs_size = ctrl_reg -
+                               f30->ctrl_regs ?: RMI_F30_CTRL_REGS_MAX_SIZE;
 
-       retval = rmi_f30_read_control_parameters(fn, f30);
-       if (retval < 0) {
+       error = rmi_f30_read_control_parameters(fn, f30);
+       if (error) {
                dev_err(&fn->dev,
-                       "Failed to initialize F19 control params.\n");
-               return retval;
-       }
-
-       map_memory = devm_kzalloc(&fn->dev,
-                                 (f30->gpioled_count * (sizeof(u16))),
-                                 GFP_KERNEL);
-       if (!map_memory) {
-               dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n");
-               return -ENOMEM;
+                       "Failed to initialize F30 control params: %d\n",
+                       error);
+               return error;
        }
 
-       f30->gpioled_key_map = (u16 *)map_memory;
-
-       pdata = rmi_get_platform_data(rmi_dev);
        if (f30->has_gpio) {
-               button = BTN_LEFT;
-               for (i = 0; i < f30->gpioled_count; i++) {
-                       if (rmi_f30_is_valid_button(i, f30->ctrl)) {
-                               f30->gpioled_key_map[i] = button++;
-
-                               /*
-                                * buttonpad might be given by
-                                * f30->has_mech_mouse_btns, but I am
-                                * not sure, so use only the pdata info
-                                */
-                               if (pdata->f30_data.buttonpad)
-                                       break;
-                       }
-               }
+               error = rmi_f30_map_gpios(fn, f30);
+               if (error)
+                       return error;
        }
 
        return 0;
@@ -378,26 +333,33 @@ static inline int rmi_f30_initialize(struct rmi_function *fn)
 
 static int rmi_f30_probe(struct rmi_function *fn)
 {
-       int rc;
+       struct rmi_device *rmi_dev = fn->rmi_dev;
        const struct rmi_device_platform_data *pdata =
-                               rmi_get_platform_data(fn->rmi_dev);
+                                       rmi_get_platform_data(rmi_dev);
+       struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+       struct f30_data *f30;
+       int error;
 
        if (pdata->f30_data.disable)
                return 0;
 
-       rc = rmi_f30_initialize(fn);
-       if (rc < 0)
-               goto error_exit;
+       if (!drv_data->input) {
+               dev_info(&fn->dev, "F30: no input device found, ignoring\n");
+               return -ENXIO;
+       }
 
-       rc = rmi_f30_register_device(fn);
-       if (rc < 0)
-               goto error_exit;
+       f30 = devm_kzalloc(&fn->dev, sizeof(*f30), GFP_KERNEL);
+       if (!f30)
+               return -ENOMEM;
 
-       return 0;
+       f30->input = drv_data->input;
 
-error_exit:
-       return rc;
+       error = rmi_f30_initialize(fn, f30);
+       if (error)
+               return error;
 
+       dev_set_drvdata(&fn->dev, f30);
+       return 0;
 }
 
 struct rmi_function_handler rmi_f30_handler = {