drm/i915: add support for per-pipe power sequencing on vlv
authorJani Nikula <jani.nikula@intel.com>
Fri, 6 Sep 2013 04:40:05 +0000 (07:40 +0300)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Fri, 6 Sep 2013 08:49:34 +0000 (10:49 +0200)
VLV has per-pipe PP registers. Set up power sequencing on mode set. The
connector init time setup is problematic, since we don't have a pipe at
that time. Cook up something.

v2:
 - use vlv_power_sequencer_pipe() also in _pp_{ctrl,stat}_reg()
 - use PANEL_PORT_SELECT_DPC_VLV (Ville)

v3: make checkpatch happier

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Make checkpatch a bit more happier still ...]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/intel_dp.c

index d7d12c3d198692b03aab23db0e95df0ad810e2f5..8c70a833950d462151c7d45328768bf18723cede 100644 (file)
@@ -237,24 +237,77 @@ intel_hrawclk(struct drm_device *dev)
        }
 }
 
+static void
+intel_dp_init_panel_power_sequencer(struct drm_device *dev,
+                                   struct intel_dp *intel_dp,
+                                   struct edp_power_seq *out);
+static void
+intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
+                                             struct intel_dp *intel_dp,
+                                             struct edp_power_seq *out);
+
+static enum pipe
+vlv_power_sequencer_pipe(struct intel_dp *intel_dp)
+{
+       struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+       struct drm_crtc *crtc = intel_dig_port->base.base.crtc;
+       struct drm_device *dev = intel_dig_port->base.base.dev;
+       struct drm_i915_private *dev_priv = dev->dev_private;
+       enum port port = intel_dig_port->port;
+       enum pipe pipe;
+
+       /* modeset should have pipe */
+       if (crtc)
+               return to_intel_crtc(crtc)->pipe;
+
+       /* init time, try to find a pipe with this port selected */
+       for (pipe = PIPE_A; pipe <= PIPE_B; pipe++) {
+               u32 port_sel = I915_READ(VLV_PIPE_PP_ON_DELAYS(pipe)) &
+                       PANEL_PORT_SELECT_MASK;
+               if (port_sel == PANEL_PORT_SELECT_DPB_VLV && port == PORT_B)
+                       return pipe;
+               if (port_sel == PANEL_PORT_SELECT_DPC_VLV && port == PORT_C)
+                       return pipe;
+       }
+
+       /* shrug */
+       return PIPE_A;
+}
+
+static u32 _pp_ctrl_reg(struct intel_dp *intel_dp)
+{
+       struct drm_device *dev = intel_dp_to_dev(intel_dp);
+
+       if (HAS_PCH_SPLIT(dev))
+               return PCH_PP_CONTROL;
+       else
+               return VLV_PIPE_PP_CONTROL(vlv_power_sequencer_pipe(intel_dp));
+}
+
+static u32 _pp_stat_reg(struct intel_dp *intel_dp)
+{
+       struct drm_device *dev = intel_dp_to_dev(intel_dp);
+
+       if (HAS_PCH_SPLIT(dev))
+               return PCH_PP_STATUS;
+       else
+               return VLV_PIPE_PP_STATUS(vlv_power_sequencer_pipe(intel_dp));
+}
+
 static bool ironlake_edp_have_panel_power(struct intel_dp *intel_dp)
 {
        struct drm_device *dev = intel_dp_to_dev(intel_dp);
        struct drm_i915_private *dev_priv = dev->dev_private;
-       u32 pp_stat_reg;
 
-       pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
-       return (I915_READ(pp_stat_reg) & PP_ON) != 0;
+       return (I915_READ(_pp_stat_reg(intel_dp)) & PP_ON) != 0;
 }
 
 static bool ironlake_edp_have_panel_vdd(struct intel_dp *intel_dp)
 {
        struct drm_device *dev = intel_dp_to_dev(intel_dp);
        struct drm_i915_private *dev_priv = dev->dev_private;
-       u32 pp_ctrl_reg;
 
-       pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
-       return (I915_READ(pp_ctrl_reg) & EDP_FORCE_VDD) != 0;
+       return (I915_READ(_pp_ctrl_reg(intel_dp)) & EDP_FORCE_VDD) != 0;
 }
 
 static void
@@ -262,19 +315,15 @@ intel_dp_check_edp(struct intel_dp *intel_dp)
 {
        struct drm_device *dev = intel_dp_to_dev(intel_dp);
        struct drm_i915_private *dev_priv = dev->dev_private;
-       u32 pp_stat_reg, pp_ctrl_reg;
 
        if (!is_edp(intel_dp))
                return;
 
-       pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
-       pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
-
        if (!ironlake_edp_have_panel_power(intel_dp) && !ironlake_edp_have_panel_vdd(intel_dp)) {
                WARN(1, "eDP powered off while attempting aux channel communication.\n");
                DRM_DEBUG_KMS("Status 0x%08x Control 0x%08x\n",
-                               I915_READ(pp_stat_reg),
-                               I915_READ(pp_ctrl_reg));
+                             I915_READ(_pp_stat_reg(intel_dp)),
+                             I915_READ(_pp_ctrl_reg(intel_dp)));
        }
 }
 
@@ -948,8 +997,8 @@ static void ironlake_wait_panel_status(struct intel_dp *intel_dp,
        struct drm_i915_private *dev_priv = dev->dev_private;
        u32 pp_stat_reg, pp_ctrl_reg;
 
-       pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
-       pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+       pp_stat_reg = _pp_stat_reg(intel_dp);
+       pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
 
        DRM_DEBUG_KMS("mask %08x value %08x status %08x control %08x\n",
                        mask, value,
@@ -991,11 +1040,8 @@ static  u32 ironlake_get_pp_control(struct intel_dp *intel_dp)
        struct drm_device *dev = intel_dp_to_dev(intel_dp);
        struct drm_i915_private *dev_priv = dev->dev_private;
        u32 control;
-       u32 pp_ctrl_reg;
-
-       pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
-       control = I915_READ(pp_ctrl_reg);
 
+       control = I915_READ(_pp_ctrl_reg(intel_dp));
        control &= ~PANEL_UNLOCK_MASK;
        control |= PANEL_UNLOCK_REGS;
        return control;
@@ -1028,8 +1074,8 @@ void ironlake_edp_panel_vdd_on(struct intel_dp *intel_dp)
        pp = ironlake_get_pp_control(intel_dp);
        pp |= EDP_FORCE_VDD;
 
-       pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
-       pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+       pp_stat_reg = _pp_stat_reg(intel_dp);
+       pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
 
        I915_WRITE(pp_ctrl_reg, pp);
        POSTING_READ(pp_ctrl_reg);
@@ -1057,8 +1103,8 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp)
                pp = ironlake_get_pp_control(intel_dp);
                pp &= ~EDP_FORCE_VDD;
 
-               pp_stat_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_STATUS : PCH_PP_STATUS;
-               pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+               pp_stat_reg = _pp_ctrl_reg(intel_dp);
+               pp_ctrl_reg = _pp_stat_reg(intel_dp);
 
                I915_WRITE(pp_ctrl_reg, pp);
                POSTING_READ(pp_ctrl_reg);
@@ -1123,20 +1169,19 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp)
 
        ironlake_wait_panel_power_cycle(intel_dp);
 
+       pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
        pp = ironlake_get_pp_control(intel_dp);
        if (IS_GEN5(dev)) {
                /* ILK workaround: disable reset around power sequence */
                pp &= ~PANEL_POWER_RESET;
-               I915_WRITE(PCH_PP_CONTROL, pp);
-               POSTING_READ(PCH_PP_CONTROL);
+               I915_WRITE(pp_ctrl_reg, pp);
+               POSTING_READ(pp_ctrl_reg);
        }
 
        pp |= POWER_TARGET_ON;
        if (!IS_GEN5(dev))
                pp |= PANEL_POWER_RESET;
 
-       pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
-
        I915_WRITE(pp_ctrl_reg, pp);
        POSTING_READ(pp_ctrl_reg);
 
@@ -1144,8 +1189,8 @@ void ironlake_edp_panel_on(struct intel_dp *intel_dp)
 
        if (IS_GEN5(dev)) {
                pp |= PANEL_POWER_RESET; /* restore panel reset bit */
-               I915_WRITE(PCH_PP_CONTROL, pp);
-               POSTING_READ(PCH_PP_CONTROL);
+               I915_WRITE(pp_ctrl_reg, pp);
+               POSTING_READ(pp_ctrl_reg);
        }
 }
 
@@ -1168,7 +1213,7 @@ void ironlake_edp_panel_off(struct intel_dp *intel_dp)
         * panels get very unhappy and cease to work. */
        pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE);
 
-       pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+       pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
 
        I915_WRITE(pp_ctrl_reg, pp);
        POSTING_READ(pp_ctrl_reg);
@@ -1201,7 +1246,7 @@ void ironlake_edp_backlight_on(struct intel_dp *intel_dp)
        pp = ironlake_get_pp_control(intel_dp);
        pp |= EDP_BLC_ENABLE;
 
-       pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+       pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
 
        I915_WRITE(pp_ctrl_reg, pp);
        POSTING_READ(pp_ctrl_reg);
@@ -1225,7 +1270,7 @@ void ironlake_edp_backlight_off(struct intel_dp *intel_dp)
        pp = ironlake_get_pp_control(intel_dp);
        pp &= ~EDP_BLC_ENABLE;
 
-       pp_ctrl_reg = IS_VALLEYVIEW(dev) ? PIPEA_PP_CONTROL : PCH_PP_CONTROL;
+       pp_ctrl_reg = _pp_ctrl_reg(intel_dp);
 
        I915_WRITE(pp_ctrl_reg, pp);
        POSTING_READ(pp_ctrl_reg);
@@ -1752,6 +1797,7 @@ static void vlv_pre_enable_dp(struct intel_encoder *encoder)
        struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
        int port = vlv_dport_to_channel(dport);
        int pipe = intel_crtc->pipe;
+       struct edp_power_seq power_seq;
        u32 val;
 
        mutex_lock(&dev_priv->dpio_lock);
@@ -1769,6 +1815,11 @@ static void vlv_pre_enable_dp(struct intel_encoder *encoder)
 
        mutex_unlock(&dev_priv->dpio_lock);
 
+       /* init power sequencer on this pipe and port */
+       intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
+       intel_dp_init_panel_power_sequencer_registers(dev, intel_dp,
+                                                     &power_seq);
+
        intel_enable_dp(encoder);
 
        vlv_wait_port_ready(dev_priv, port);
@@ -3161,24 +3212,26 @@ intel_dp_init_panel_power_sequencer(struct drm_device *dev,
        struct drm_i915_private *dev_priv = dev->dev_private;
        struct edp_power_seq cur, vbt, spec, final;
        u32 pp_on, pp_off, pp_div, pp;
-       int pp_control_reg, pp_on_reg, pp_off_reg, pp_div_reg;
+       int pp_ctrl_reg, pp_on_reg, pp_off_reg, pp_div_reg;
 
        if (HAS_PCH_SPLIT(dev)) {
-               pp_control_reg = PCH_PP_CONTROL;
+               pp_ctrl_reg = PCH_PP_CONTROL;
                pp_on_reg = PCH_PP_ON_DELAYS;
                pp_off_reg = PCH_PP_OFF_DELAYS;
                pp_div_reg = PCH_PP_DIVISOR;
        } else {
-               pp_control_reg = PIPEA_PP_CONTROL;
-               pp_on_reg = PIPEA_PP_ON_DELAYS;
-               pp_off_reg = PIPEA_PP_OFF_DELAYS;
-               pp_div_reg = PIPEA_PP_DIVISOR;
+               enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
+
+               pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
+               pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
+               pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe);
+               pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
        }
 
        /* Workaround: Need to write PP_CONTROL with the unlock key as
         * the very first thing. */
        pp = ironlake_get_pp_control(intel_dp);
-       I915_WRITE(pp_control_reg, pp);
+       I915_WRITE(pp_ctrl_reg, pp);
 
        pp_on = I915_READ(pp_on_reg);
        pp_off = I915_READ(pp_off_reg);
@@ -3266,9 +3319,11 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
                pp_off_reg = PCH_PP_OFF_DELAYS;
                pp_div_reg = PCH_PP_DIVISOR;
        } else {
-               pp_on_reg = PIPEA_PP_ON_DELAYS;
-               pp_off_reg = PIPEA_PP_OFF_DELAYS;
-               pp_div_reg = PIPEA_PP_DIVISOR;
+               enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
+
+               pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
+               pp_off_reg = VLV_PIPE_PP_OFF_DELAYS(pipe);
+               pp_div_reg = VLV_PIPE_PP_DIVISOR(pipe);
        }
 
        /* And finally store the new values in the power sequencer. */
@@ -3285,7 +3340,10 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
        /* Haswell doesn't have any port selection bits for the panel
         * power sequencer any more. */
        if (IS_VALLEYVIEW(dev)) {
-               port_sel = I915_READ(pp_on_reg) & 0xc0000000;
+               if (dp_to_dig_port(intel_dp)->port == PORT_B)
+                       port_sel = PANEL_PORT_SELECT_DPB_VLV;
+               else
+                       port_sel = PANEL_PORT_SELECT_DPC_VLV;
        } else if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
                if (dp_to_dig_port(intel_dp)->port == PORT_A)
                        port_sel = PANEL_PORT_SELECT_DPA;