#include <mach/hardware.h>
-#include "../plat-omap/sram.h"
-
#include "soc.h"
#include "iomap.h"
#include "clock.h"
#include "opp.h"
+#include "sram.h"
__u32 arm_idlect1_mask;
struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
#include <mach/hardware.h>
#include <mach/usb.h> /* for OTG_BASE */
-#include "../plat-omap/sram.h"
-
#include "iomap.h"
#include "clock.h"
+#include "sram.h"
/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
#define IDL_CLKOUT_ARM_SHIFT 12
#include <mach/camera.h>
#include <mach/hardware.h>
-#include "../plat-omap/sram.h"
-
#include "common.h"
#include "clock.h"
#include "dma.h"
#include "mmc.h"
+#include "sram.h"
#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
#include <linux/io.h>
#include <linux/atomic.h>
+#include <asm/fncpy.h>
#include <asm/system_misc.h>
#include <asm/irq.h>
#include <asm/mach/time.h>
#include <mach/irqs.h>
-#include "../plat-omap/sram.h"
-
#include "iomap.h"
#include "clock.h"
#include "pm.h"
+#include "sram.h"
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
--- /dev/null
+#include <plat/sram.h>
+
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+/* Do not use these */
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
#include <linux/clk.h>
#include <linux/io.h>
-#include "../plat-omap/sram.h"
-
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
+#include "sram.h"
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
#include <linux/cpufreq.h>
#include <linux/slab.h>
-#include "../plat-omap/sram.h"
-
#include "soc.h"
#include "clock.h"
#include "clock2xxx.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
+#include "sram.h"
const struct prcm_config *curr_prcm_set;
const struct prcm_config *rate_table;
#include <linux/clk.h>
#include <linux/io.h>
-#include "../plat-omap/sram.h"
-
#include "clock.h"
#include "clock3xxx.h"
#include "clock34xx.h"
#include "sdrc.h"
+#include "sram.h"
#define CYCLES_PER_MHZ 1000000
#include <plat-omap/dma-omap.h>
-#include "../plat-omap/sram.h"
-
#include "omap_hwmod.h"
#include "soc.h"
#include "iomap.h"
#include "omap-pm.h"
#include "sdrc.h"
#include "serial.h"
+#include "sram.h"
/*
* The machine specific code may provide the extra mapping besides the
#include <asm/mach/map.h>
#include <asm/memblock.h>
-#include "../plat-omap/sram.h"
-
#include "omap-wakeupgen.h"
#include "soc.h"
#include "common.h"
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
+#include <asm/fncpy.h>
+
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <plat-omap/dma-omap.h>
-#include "../plat-omap/sram.h"
-
#include "soc.h"
#include "common.h"
#include "clock.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
+#include "sram.h"
#include "pm.h"
#include "control.h"
#include "powerdomain.h"
#include <trace/events/power.h>
+#include <asm/fncpy.h>
#include <asm/suspend.h>
#include <asm/system_misc.h>
#include <plat/prcm.h>
#include <plat-omap/dma-omap.h>
-#include "../plat-omap/sram.h"
-
#include "soc.h"
#include "common.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "pm.h"
#include "sdrc.h"
+#include "sram.h"
#include "control.h"
/* pm34xx errata defined in pm.h */
#include <linux/clk.h>
#include <linux/io.h>
-#include "../plat-omap/sram.h"
-
#include "common.h"
#include "clock.h"
#include "sdrc.h"
#include <linux/clk.h>
#include <linux/io.h>
-#include "../plat-omap/sram.h"
-
#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "prm2xxx_3xxx.h"
#include "clock.h"
#include "sdrc.h"
+#include "sram.h"
/* Memory timing, DLL mode flags */
#define M_DDR 1
#include <asm/assembler.h>
-#include "../plat-omap/sram.h"
-
#include "omap34xx.h"
#include "iomap.h"
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#include "sdrc.h"
+#include "sram.h"
#include "control.h"
/*
--- /dev/null
+/*
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASSEMBLY__
+#include <plat/sram.h>
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+extern u32 omap3_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern void omap3_sram_restore_context(void);
+
+/* Do not use these */
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
+
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
+
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+ u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+ int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+ u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+extern u32 omap3_sram_configure_core_dpll(
+ u32 m2, u32 unlock_dll, u32 f, u32 inc,
+ u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+ u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+ u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+ u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern unsigned long omap3_sram_configure_core_dpll_sz;
+
+#ifdef CONFIG_PM
+extern void omap_push_sram_idle(void);
+#else
+static inline void omap_push_sram_idle(void) {}
+#endif /* CONFIG_PM */
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA 0x40200000
+#define OMAP3_SRAM_PA 0x40200000
+#ifdef CONFIG_OMAP4_ERRATA_I688
+#define OMAP4_SRAM_PA 0x40304000
+#define OMAP4_SRAM_VA 0xfe404000
+#else
+#define OMAP4_SRAM_PA 0x40300000
+#endif
+#define AM33XX_SRAM_PA 0x40300000
--- /dev/null
+int omap_sram_init(void);
+
+extern void *omap_sram_push_address(unsigned long size);
+
+/* Macro to push a function to the internal SRAM, using the fncpy API */
+#define omap_sram_push(funcp, size) ({ \
+ typeof(&(funcp)) _res = NULL; \
+ void *_sram_address = omap_sram_push_address(size); \
+ if (_sram_address) \
+ _res = fncpy(_sram_address, &(funcp), size); \
+ _res; \
+})
#include <linux/init.h>
#include <linux/io.h>
+#include <asm/fncpy.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
#include "../mach-omap1/soc.h"
+#include "../mach-omap1/sram.h"
#include "../mach-omap2/soc.h"
-
-#include "sram.h"
+#include "../mach-omap2/sram.h"
/* XXX These "sideways" includes will disappear when sram.c becomes a driver */
#include "../mach-omap2/iomap.h"
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/sram.h
- *
- * Interface for functions that need to be run in internal SRAM
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_OMAP_SRAM_H
-#define __ARCH_ARM_OMAP_SRAM_H
-
-#ifndef __ASSEMBLY__
-#include <asm/fncpy.h>
-
-int __init omap_sram_init(void);
-
-extern void *omap_sram_push_address(unsigned long size);
-
-/* Macro to push a function to the internal SRAM, using the fncpy API */
-#define omap_sram_push(funcp, size) ({ \
- typeof(&(funcp)) _res = NULL; \
- void *_sram_address = omap_sram_push_address(size); \
- if (_sram_address) \
- _res = fncpy(_sram_address, &(funcp), size); \
- _res; \
-})
-
-extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
-
-extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
-
-extern u32 omap3_configure_core_dpll(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern void omap3_sram_restore_context(void);
-
-/* Do not use these */
-extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap1_sram_reprogram_clock_sz;
-
-extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
-extern unsigned long omap24xx_sram_reprogram_clock_sz;
-
-extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long omap242x_sram_ddr_init_sz;
-
-extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
- int bypass);
-extern unsigned long omap242x_sram_set_prcm_sz;
-
-extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern unsigned long omap242x_sram_reprogram_sdrc_sz;
-
-
-extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
- u32 base_cs, u32 force_unlock);
-extern unsigned long omap243x_sram_ddr_init_sz;
-
-extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
- int bypass);
-extern unsigned long omap243x_sram_set_prcm_sz;
-
-extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
- u32 mem_type);
-extern unsigned long omap243x_sram_reprogram_sdrc_sz;
-
-extern u32 omap3_sram_configure_core_dpll(
- u32 m2, u32 unlock_dll, u32 f, u32 inc,
- u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
- u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
- u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
- u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
-extern unsigned long omap3_sram_configure_core_dpll_sz;
-
-#ifdef CONFIG_PM
-extern void omap_push_sram_idle(void);
-#else
-static inline void omap_push_sram_idle(void) {}
-#endif /* CONFIG_PM */
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * OMAP2+: define the SRAM PA addresses.
- * Used by the SRAM management code and the idle sleep code.
- */
-#define OMAP2_SRAM_PA 0x40200000
-#define OMAP3_SRAM_PA 0x40200000
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PA 0x40304000
-#define OMAP4_SRAM_VA 0xfe404000
-#else
-#define OMAP4_SRAM_PA 0x40300000
-#endif
-#define AM33XX_SRAM_PA 0x40300000
-#endif