mtd: nand: atmel: Relax tADL_min constraint

Version 4 of the ONFI spec mandates that tADL be at least 400 nanoseconds,
but, depending on the master clock rate, 400 ns may not fit in the tADL
field of the SMC reg. We need to relax the check and accept the -ERANGE
return code.

Note that previous versions of the ONFI spec had a lower tADL_min (100 or
200 ns). It's not clear why this timing constraint got increased but it
seems most NANDs are fine with values lower than 400ns, so we should be
safe.

Fixes: f9ce2eddf176 ("mtd: nand: atmel: Add ->setup_data_interface() hooks")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

diff --git a/drivers/mtd/nand/atmel/nand-controller.c b/drivers/mtd/nand/atmel/nand-controller.c
index 2c8baa0c2c4e11f2b5d1c39d4c3ad795d634135a..ceec21bd30c4fc5c49ad4c4bdbfe9bd031005809 100644 (file)
--- a/drivers/mtd/nand/atmel/nand-controller.c
+++ b/drivers/mtd/nand/atmel/nand-controller.c
@@ -1364,7 +1364,18 @@ static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand,
        ret = atmel_smc_cs_conf_set_timing(smcconf,
                                           ATMEL_HSMC_TIMINGS_TADL_SHIFT,
                                           ncycles);
-       if (ret)
+       /*
+        * Version 4 of the ONFI spec mandates that tADL be at least 400
+        * nanoseconds, but, depending on the master clock rate, 400 ns may not
+        * fit in the tADL field of the SMC reg. We need to relax the check and
+        * accept the -ERANGE return code.
+        *
+        * Note that previous versions of the ONFI spec had a lower tADL_min
+        * (100 or 200 ns). It's not clear why this timing constraint got
+        * increased but it seems most NANDs are fine with values lower than
+        * 400ns, so we should be safe.
+        */
+       if (ret && ret != -ERANGE)
                return ret;
 
        ncycles = DIV_ROUND_UP(conf->timings.sdr.tAR_min, mckperiodps);