V4L/DVB (7598): em28xx: several fixes on gpio programming
authorDevin Heitmueller <devin.heitmueller@gmail.com>
Fri, 18 Apr 2008 00:38:27 +0000 (21:38 -0300)
committerMauro Carvalho Chehab <mchehab@infradead.org>
Thu, 24 Apr 2008 17:09:41 +0000 (14:09 -0300)
em28xx-cards.c:
 - Fix reversed val/rst values in both analog_gpio and digital_gpio
   vectors
 - Fix crash that would was occurring during every analog startup
   while looping over gpio_ctl
 - Remove what appears to be a redundant setting of gpio_ctl->val
 - Don't use OREN538 demodulation for the HVR-950 (prevents ATSC
   scanning from working)

em28xx-dvb.c:
 - Tuner should be in digital mode when issuing the reset
 - Add copyright
 - Change struct definition (corresponds to fix in em28xx-cards.c for
   gpio_ctl looping)

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/video/em28xx/em28xx-cards.c
drivers/media/video/em28xx/em28xx-dvb.c
drivers/media/video/em28xx/em28xx.h

index f4883b4a6b7ae80590b4c6746eea8b78cb9b18fa..2e7fd19111545eaad960d5ff4a4282dd150bfb33 100644 (file)
@@ -197,8 +197,8 @@ struct em28xx_board em28xx_boards[] = {
                .analog_gpio = {
                        {               /* xc3028 reset seq */
                                .reg = 0x08,
-                               .val = 0x3d,
-                               .rst = 0x2d,
+                               .val = 0x2d,
+                               .rst = 0x3d,
                                .t1 = 5,
                                .t2 = 10,
                                .t3 = 5,
@@ -207,15 +207,15 @@ struct em28xx_board em28xx_boards[] = {
                .digital_gpio = {
                        {               /* xc3028 reset seq */
                                .reg = 0x08,
-                               .val = 0x3e,
-                               .rst = 0x2e,
+                               .val = 0x2e,
+                               .rst = 0x3e,
                                .t1 = 6,
                                .t2 = 6,
                                .t3 = 6,
                        }, {            /* demod reset seq */
                                .reg = 0x04,
-                               .val = 0x0c,
-                               .rst = 0x04,
+                               .val = 0x04,
+                               .rst = 0x0c,
                                .t2 = 10,
                                .t3 = 10,
                        }
@@ -472,7 +472,7 @@ int em28xx_tuner_callback(void *ptr, int command, int arg)
 {
        int rc = 0, i;
        struct em28xx *dev = ptr;
-       struct gpio_ctl (*gpio_ctl)[MAX_GPIO];
+       struct gpio_ctl *gpio_ctl;
 
        if (dev->tuner_type != TUNER_XC2028)
                return 0;
@@ -485,30 +485,40 @@ int em28xx_tuner_callback(void *ptr, int command, int arg)
        else
                gpio_ctl = dev->digital_gpio;
 
+       /* djh - Not sure if these are still required */
+       if (dev->mode == EM28XX_ANALOG_MODE) {
+         dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
+         dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1);
+         msleep(6);
+       } else {
+         dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
+         dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x37", 1);
+         msleep(6);
+       }
+
        /* Send GPIO reset sequences specified at board entry */
        for (i = 0; i < MAX_GPIO; i++) {
-               if (!gpio_ctl[i]->val)
+               if (!gpio_ctl->val)
                        break;
 
                dev->em28xx_write_regs(dev,
-                                      gpio_ctl[i]->reg,
-                                      &gpio_ctl[i]->val, 1);
-               if (gpio_ctl[i]->t1)
-                       msleep(gpio_ctl[i]->t1);
+                                      gpio_ctl->reg,
+                                      &gpio_ctl->val, 1);
+               if (gpio_ctl->t1)
+                       msleep(gpio_ctl->t1);
 
-               if (!gpio_ctl[i]->rst)
+               if (!gpio_ctl->rst) {
+                       gpio_ctl++;
                        continue;
-               dev->em28xx_write_regs(dev,
-                                      gpio_ctl[i]->reg,
-                                      &gpio_ctl[i]->rst, 1);
-               if (gpio_ctl[i]->t2)
-                       msleep(gpio_ctl[i]->t2);
+               }
 
                dev->em28xx_write_regs(dev,
-                                      gpio_ctl[i]->reg,
-                                      &gpio_ctl[i]->val, 1);
-               if (gpio_ctl[i]->t3)
-                       msleep(gpio_ctl[i]->t3);
+                                      gpio_ctl->reg,
+                                      &gpio_ctl->rst, 1);
+               if (gpio_ctl->t2)
+                       msleep(gpio_ctl->t2);
+
+               gpio_ctl++;
        }
        return rc;
 }
@@ -524,8 +534,8 @@ static void em28xx_set_model(struct em28xx *dev)
        dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s;
        dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
        dev->has_dvb = em28xx_boards[dev->model].has_dvb;
-       dev->analog_gpio = &em28xx_boards[dev->model].analog_gpio;
-       dev->digital_gpio = &em28xx_boards[dev->model].digital_gpio;
+       dev->analog_gpio = em28xx_boards[dev->model].analog_gpio;
+       dev->digital_gpio = em28xx_boards[dev->model].digital_gpio;
 }
 
 /* Since em28xx_pre_card_setup() requires a proper dev->model,
@@ -562,6 +572,9 @@ void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 
        switch (dev->model) {
        /* Add card-specific parameters for xc3028 here */
+       case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
+               ctl->demod = XC3028_FE_DEFAULT;
+               break;
        default:
                ctl->demod = XC3028_FE_OREN538;
        }
index 1ceabeac4f7b6ae279cef597be1ac3349b5f9406..cbc155d302c87719c837b90269462e8d72748d10 100644 (file)
@@ -3,6 +3,9 @@
 
  (c) 2008 Mauro Carvalho Chehab <mchehab@infradead.org>
 
+ (c) 2008 Devin Heitmueller <devin.heitmueller@gmail.com>
+       - Fixes for the driver to properly work with HVR-950
+
  Based on cx88-dvb and saa7134-dvb originally written by:
        (c) 2004, 2005 Chris Pascoe <c.pascoe@itee.uq.edu.au>
        (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
@@ -116,7 +119,7 @@ static int dvb_init(struct em28xx *dev)
        switch (dev->model) {
        case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
                /* Enable lgdt330x */
-               dev->mode = EM28XX_ANALOG_MODE;
+               dev->mode = EM28XX_DIGITAL_MODE;
                em28xx_tuner_callback(dev, XC2028_TUNER_RESET, 0);
 
                dev->dvb.frontend = dvb_attach(lgdt330x_attach,
index fa1c74217a52214860a78f30e72661d0d081677f..10f64652c04f78ada7dc7829e625dedad500e415 100644 (file)
@@ -319,8 +319,8 @@ struct em28xx {
        unsigned int max_range_640_480:1;
        unsigned int has_dvb:1;
 
-       struct gpio_ctl (*analog_gpio)[MAX_GPIO];
-       struct gpio_ctl (*digital_gpio)[MAX_GPIO];
+       struct gpio_ctl *analog_gpio;
+       struct gpio_ctl *digital_gpio;
 
        int video_inputs;       /* number of video inputs */
        struct list_head        devlist;