ab8500: Add devicetree support for btemp

This patch adds device tree support for battery-temperature-monitor driver

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>

diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
index 6ca8d817ef9238d7779b702a7754d1764ca7318f..f2ee0e7a5da3b4c8c19fdcf24f002920e29b9cf5 100644 (file)
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -30,6 +30,12 @@ ab8500-fg                :                   : vddadc       : Fuel Gauge
                         : LOW_BAT_F            :              : LOW threshold battery voltage
                         : CC_INT_CALIB         :              : Coulomb Counter Internal Calibration
                         : CCEOC                :              : Coulomb Counter End of Conversion
+ab8500-btemp            :                      : vtvout       : Battery Temperature
+                        : BAT_CTRL_INDB        :              : Battery Removal Indicator
+                        : BTEMP_LOW            :              : Btemp < BtempLow, if battery temperature is lower than -10°C
+                        : BTEMP_LOW_MEDIUM     :              : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
+                        : BTEMP_MEDIUM_HIGH    :              : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
+                        : BTEMP_HIGH           :              : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp
 ab8500-gpadc             : HW_CONV_END          : vddadc       : Analogue to Digital Converter
                            SW_CONV_END          :              :
 ab8500-gpio              :                      :              : GPIO Controller

diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt b/Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
new file mode 100644 (file)
index 0000000..0ba1bcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
@@ -0,0 +1,16 @@
+=== AB8500 Battery Temperature Monitor Driver ===
+
+The properties below describes the node for btemp driver.
+
+Required Properties:
+- compatible = Shall be: "stericsson,ab8500-btemp"
+- battery = Shall be battery specific information
+
+       Example:
+       ab8500_btemp {
+               compatible = "stericsson,ab8500-btemp";
+               battery    = <&ab8500_battery>;
+       };
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt

diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 0c81986904c59dfbada591847070634d4afdf085..d170fadd7ddb5de8c004bbf86f09708363c25851 100644 (file)
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -362,6 +362,11 @@
                                        battery    = <&ab8500_battery>;
                                };
 
+                               ab8500_btemp {
+                                       compatible = "stericsson,ab8500-btemp";
+                                       battery    = <&ab8500_battery>;
+                               };
+
                                ab8500_usb {
                                        compatible = "stericsson,ab8500-usb";
                                        interrupts = < 90 0x4

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 7c3017ba73e4b53cc6b01dbb4180ab732804f9df..94d45be5c1b491536cc9fb758ee3dde001049cc2 100644 (file)
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1046,8 +1046,13 @@ static struct mfd_cell __devinitdata ab8500_bm_devs[] = {
        },
        {
                .name = "ab8500-btemp",
+               .of_compatible = "stericsson,ab8500-btemp",
                .num_resources = ARRAY_SIZE(ab8500_btemp_resources),
                .resources = ab8500_btemp_resources,
+#ifndef CONFIG_OF
+               .platform_data = &ab8500_bm_data,
+               .pdata_size = sizeof(ab8500_bm_data),
+#endif
        },
        {
                .name = "ab8500-fg",

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 523a58014ed51bd0fcbd19701f5a6f14f06c5703..263499f8709a3ffadb49f1e401139161504395c7 100644 (file)
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -346,12 +346,6 @@ config AB8500_BM
        help
          Say Y to include support for AB8500 battery management.
 
-config AB8500_BATTERY_THERM_ON_BATCTRL
-       bool "Thermistor connected on BATCTRL ADC"
-       depends on AB8500_BM
-       help
-         Say Y to enable battery temperature measurements using
-         thermistor connected on BATCTRL ADC.
 endif # POWER_SUPPLY
 
 source "drivers/power/avs/Kconfig"

diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
index e7639b6659f731a2fd7e36aa4c9e1893fb8b9d7a..03cc528425cb883ceb346eba27560edd20b3fda8 100644 (file)
--- a/drivers/power/ab8500_bmdata.c
+++ b/drivers/power/ab8500_bmdata.c
@@ -30,7 +30,7 @@ static struct abx500_res_to_temp temp_tbl_A_thermistor[] = {
 };
 
 static struct abx500_res_to_temp temp_tbl_B_thermistor[] = {
-       {-5, 165418},
+       {-5, 200000},
        { 0, 159024},
        { 5, 151921},
        {10, 144300},
@@ -240,7 +240,7 @@ static struct abx500_battery_type bat_type_thermistor[] = {
 },
 {
        .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
-       .resis_high = 165418,
+       .resis_high = 200000,
        .resis_low = 82869,
        .battery_resistance = 300,
        .charge_full_design = 900,

diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index abc2abc16a5de232ebbe63fdd656f7b0cb75c4ff..8135542ee7460f3c4435e4d66ba5ba3837e14788 100644 (file)
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -20,11 +20,13 @@
 #include <linux/power_supply.h>
 #include <linux/completion.h>
 #include <linux/workqueue.h>
-#include <linux/mfd/abx500/ab8500.h>
+#include <linux/jiffies.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
 #include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
 #include <linux/mfd/abx500/ab8500-gpadc.h>
-#include <linux/jiffies.h>
 
 #define VTVOUT_V                       1800
 
@@ -76,7 +78,6 @@ struct ab8500_btemp_ranges {
  * @parent:            Pointer to the struct ab8500
  * @gpadc:             Pointer to the struct gpadc
  * @fg:                        Pointer to the struct fg
- * @pdata:             Pointer to the abx500_btemp platform data
  * @bat:               Pointer to the abx500_bm platform data
  * @btemp_psy:         Structure for BTEMP specific battery properties
  * @events:            Structure for information about events triggered
@@ -93,7 +94,6 @@ struct ab8500_btemp {
        struct ab8500 *parent;
        struct ab8500_gpadc *gpadc;
        struct ab8500_fg *fg;
-       struct abx500_bmdevs_plat_data *pdata;
        struct abx500_bm_data *bat;
        struct power_supply btemp_psy;
        struct ab8500_btemp_events events;
@@ -955,48 +955,57 @@ static int __devexit ab8500_btemp_remove(struct platform_device *pdev)
        flush_scheduled_work();
        power_supply_unregister(&di->btemp_psy);
        platform_set_drvdata(pdev, NULL);
-       kfree(di);
 
        return 0;
 }
 
+static char *supply_interface[] = {
+       "ab8500_chargalg",
+       "ab8500_fg",
+};
+
 static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
 {
-       struct abx500_bmdevs_plat_data *plat_data = pdev->dev.platform_data;
+       struct device_node *np = pdev->dev.of_node;
        struct ab8500_btemp *di;
        int irq, i, ret = 0;
        u8 val;
 
-       if (!plat_data) {
-               dev_err(&pdev->dev, "No platform data\n");
-               return -EINVAL;
-       }
-
-       di = kzalloc(sizeof(*di), GFP_KERNEL);
-       if (!di)
+       di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+       if (!di) {
+               dev_err(&pdev->dev, "%s no mem for ab8500_btemp\n", __func__);
                return -ENOMEM;
+       }
+       di->bat = pdev->mfd_cell->platform_data;
+       if (!di->bat) {
+               if (np) {
+                       ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
+                       if (ret) {
+                               dev_err(&pdev->dev,
+                                       "failed to get battery information\n");
+                               return ret;
+                       }
+               } else {
+                       dev_err(&pdev->dev, "missing dt node for ab8500_btemp\n");
+                       return -EINVAL;
+               }
+       } else {
+               dev_info(&pdev->dev, "falling back to legacy platform data\n");
+       }
 
        /* get parent data */
        di->dev = &pdev->dev;
        di->parent = dev_get_drvdata(pdev->dev.parent);
        di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
 
-       /* get btemp specific platform data */
-       di->pdata = plat_data;
-       if (!di->pdata) {
-               dev_err(di->dev, "no btemp platform data supplied\n");
-               ret = -EINVAL;
-               goto free_device_info;
-       }
-
        /* BTEMP supply */
        di->btemp_psy.name = "ab8500_btemp";
        di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY;
        di->btemp_psy.properties = ab8500_btemp_props;
        di->btemp_psy.num_properties = ARRAY_SIZE(ab8500_btemp_props);
        di->btemp_psy.get_property = ab8500_btemp_get_property;
-       di->btemp_psy.supplied_to = di->pdata->supplied_to;
-       di->btemp_psy.num_supplicants = di->pdata->num_supplicants;
+       di->btemp_psy.supplied_to = supply_interface;
+       di->btemp_psy.num_supplicants = ARRAY_SIZE(supply_interface);
        di->btemp_psy.external_power_changed =
                ab8500_btemp_external_power_changed;
 
@@ -1006,8 +1015,7 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
                create_singlethread_workqueue("ab8500_btemp_wq");
        if (di->btemp_wq == NULL) {
                dev_err(di->dev, "failed to create work queue\n");
-               ret = -ENOMEM;
-               goto free_device_info;
+               return -ENOMEM;
        }
 
        /* Init work for measuring temperature periodically */
@@ -1085,12 +1093,14 @@ free_irq:
        }
 free_btemp_wq:
        destroy_workqueue(di->btemp_wq);
-free_device_info:
-       kfree(di);
-
        return ret;
 }
 
+static const struct of_device_id ab8500_btemp_match[] = {
+       { .compatible = "stericsson,ab8500-btemp", },
+       { },
+};
+
 static struct platform_driver ab8500_btemp_driver = {
        .probe = ab8500_btemp_probe,
        .remove = __devexit_p(ab8500_btemp_remove),
@@ -1099,6 +1109,7 @@ static struct platform_driver ab8500_btemp_driver = {
        .driver = {
                .name = "ab8500-btemp",
                .owner = THIS_MODULE,
+               .of_match_table = ab8500_btemp_match,
        },
 };