ARM: shmobile: koelsch legacy: Add QSPI support

Enable support for the Spansion s25fl512s SPI FLASH on the Koelsch board:
  - Add QSPI platform device, resources, platform data, and pinmux,
  - Add FLASH data and MTD partitions.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c
index 2741dba74aaa54733be1c7753809d97e0f20c6bb..d42637db596aa69faecab64e7c7b13452e08670b 100644 (file)
--- a/arch/arm/mach-shmobile/board-koelsch.c
+++ b/arch/arm/mach-shmobile/board-koelsch.c
@@ -26,12 +26,17 @@
 #include <linux/irq.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 #include <linux/phy.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/rcar-du.h>
 #include <linux/platform_device.h>
 #include <linux/sh_eth.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/rspi.h>
+#include <linux/spi/spi.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7791.h>
@@ -150,6 +155,55 @@ static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = {
        .nbuttons       = ARRAY_SIZE(gpio_buttons),
 };
 
+/* QSPI */
+static const struct resource qspi_resources[] __initconst = {
+       DEFINE_RES_MEM(0xe6b10000, 0x1000),
+       DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),
+};
+
+static const struct rspi_plat_data qspi_pdata __initconst = {
+       .num_chipselect = 1,
+};
+
+/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64 MiB) */
+static struct mtd_partition spi_flash_part[] = {
+       {
+               .name           = "loader",
+               .offset         = 0x00000000,
+               .size           = 512 * 1024,
+               .mask_flags     = MTD_WRITEABLE,
+       },
+       {
+               .name           = "bootenv",
+               .offset         = MTDPART_OFS_APPEND,
+               .size           = 512 * 1024,
+               .mask_flags     = MTD_WRITEABLE,
+       },
+       {
+               .name           = "data",
+               .offset         = MTDPART_OFS_APPEND,
+               .size           = MTDPART_SIZ_FULL,
+       },
+};
+
+static const struct flash_platform_data spi_flash_data = {
+       .name           = "m25p80",
+       .parts          = spi_flash_part,
+       .nr_parts       = ARRAY_SIZE(spi_flash_part),
+       .type           = "s25fl512s",
+};
+
+static const struct spi_board_info spi_info[] __initconst = {
+       {
+               .modalias       = "m25p80",
+               .platform_data  = &spi_flash_data,
+               .mode           = SPI_MODE_0,
+               .max_speed_hz   = 30000000,
+               .bus_num        = 0,
+               .chip_select    = 0,
+       },
+};
+
 /* SATA0 */
 static const struct resource sata0_resources[] __initconst = {
        DEFINE_RES_MEM(0xee300000, 0x2000),
@@ -214,6 +268,11 @@ static const struct pinctrl_map koelsch_pinctrl_map[] = {
                                  "eth_rmii", "eth"),
        PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
                                  "intc_irq0", "intc"),
+       /* QSPI */
+       PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
+                                 "qspi_ctrl", "qspi"),
+       PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
+                                 "qspi_data4", "qspi"),
        /* SCIF0 (CN19: DEBUG SERIAL0) */
        PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791",
                                  "scif0_data_d", "scif0"),
@@ -248,6 +307,11 @@ static void __init koelsch_add_standard_devices(void)
        platform_device_register_data(&platform_bus, "gpio-keys", -1,
                                      &koelsch_keys_pdata,
                                      sizeof(koelsch_keys_pdata));
+       platform_device_register_resndata(&platform_bus, "qspi", 0,
+                                         qspi_resources,
+                                         ARRAY_SIZE(qspi_resources),
+                                         &qspi_pdata, sizeof(qspi_pdata));
+       spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
 
        koelsch_add_du_device();