usb-serial: Fix edgeport regression on non-EPiC devices

Fix serious regression on non-EPiC edgeport usb-serial devices. Baud
rate and MCR/LCR registers are not being written on these models due
to apparent copy-n-paste errors introduced with EPiC support.

Failure reported by Nick Pasich <Nick@NickAndBarb.net>.

Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index dd42f57089ffea3a97ee86357113079d00a972a9..2ecb1d2a034d0aa03dc08af168ae09a2f918efea 100644 (file)
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2366,9 +2366,8 @@ static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRa
        int status;
        unsigned char number = edge_port->port->number - edge_port->port->serial->minor;
 
-       if ((!edge_serial->is_epic) ||
-           ((edge_serial->is_epic) &&
-            (!edge_serial->epic_descriptor.Supports.IOSPSetBaudRate))) {
+       if (edge_serial->is_epic &&
+           !edge_serial->epic_descriptor.Supports.IOSPSetBaudRate) {
                dbg("SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d",
                    edge_port->port->number, baudRate);
                return 0;
@@ -2461,18 +2460,16 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
 
        dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __FUNCTION__, regValue);
 
-       if ((!edge_serial->is_epic) ||
-           ((edge_serial->is_epic) &&
-            (!edge_serial->epic_descriptor.Supports.IOSPWriteMCR) &&
-            (regNum == MCR))) {
+       if (edge_serial->is_epic &&
+           !edge_serial->epic_descriptor.Supports.IOSPWriteMCR &&
+           regNum == MCR) {
                dbg("SendCmdWriteUartReg - Not writing to MCR Register");
                return 0;
        }
 
-       if ((!edge_serial->is_epic) ||
-           ((edge_serial->is_epic) &&
-            (!edge_serial->epic_descriptor.Supports.IOSPWriteLCR) &&
-            (regNum == LCR))) {
+       if (edge_serial->is_epic &&
+           !edge_serial->epic_descriptor.Supports.IOSPWriteLCR &&
+           regNum == LCR) {
                dbg ("SendCmdWriteUartReg - Not writing to LCR Register");
                return 0;
        }