module_param_named(atapi_dma, ali_atapi_dma, int, 0644);
MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)");
-static struct pci_dev *isa_bridge;
+static struct pci_dev *ali_isa_bridge;
/*
* Cable special cases
int port_bit = 4 << link->ap->port_no;
/* If our bridge is an ALI 1533 then do the extra work */
- if (isa_bridge) {
+ if (ali_isa_bridge) {
/* Tristate and re-enable the bus signals */
- pci_read_config_byte(isa_bridge, 0x58, &r);
+ pci_read_config_byte(ali_isa_bridge, 0x58, &r);
r &= ~port_bit;
- pci_write_config_byte(isa_bridge, 0x58, r);
+ pci_write_config_byte(ali_isa_bridge, 0x58, r);
r |= port_bit;
- pci_write_config_byte(isa_bridge, 0x58, r);
+ pci_write_config_byte(ali_isa_bridge, 0x58, r);
}
ata_sff_postreset(link, classes);
}
pci_write_config_byte(pdev, 0x53, tmp);
}
north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
- if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {
+ if (north && north->vendor == PCI_VENDOR_ID_AL && ali_isa_bridge) {
/* Configure the ALi bridge logic. For non ALi rely on BIOS.
Set the south bridge enable bit */
- pci_read_config_byte(isa_bridge, 0x79, &tmp);
+ pci_read_config_byte(ali_isa_bridge, 0x79, &tmp);
if (pdev->revision == 0xC2)
- pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
+ pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x04);
else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
- pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
+ pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x02);
}
pci_dev_put(north);
ata_pci_bmdma_clear_simplex(pdev);
ali_init_chipset(pdev);
- if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
+ if (ali_isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
/* Are we paired with a UDMA capable chip */
- pci_read_config_byte(isa_bridge, 0x5E, &tmp);
+ pci_read_config_byte(ali_isa_bridge, 0x5E, &tmp);
if ((tmp & 0x1E) == 0x12)
ppi[0] = &info_20_udma;
}
static int __init ali_init(void)
{
int ret;
- isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+ ali_isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
ret = pci_register_driver(&ali_pci_driver);
if (ret < 0)
- pci_dev_put(isa_bridge);
+ pci_dev_put(ali_isa_bridge);
return ret;
}
static void __exit ali_exit(void)
{
pci_unregister_driver(&ali_pci_driver);
- pci_dev_put(isa_bridge);
+ pci_dev_put(ali_isa_bridge);
}