omapdrm-y := omap_drv.o \
omap_debugfs.o \
omap_crtc.o \
+ omap_plane.o \
omap_encoder.o \
omap_connector.o \
omap_fb.o \
struct omap_crtc {
struct drm_crtc base;
- struct omap_overlay *ovl;
- struct omap_overlay_info info;
+ struct drm_plane *plane;
+ const char *name;
int id;
- /* if there is a pending flip, this will be non-null: */
+ /* if there is a pending flip, these will be non-null: */
struct drm_pending_vblank_event *event;
+ struct drm_framebuffer *old_fb;
};
-/* push changes down to dss2 */
-static int commit(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- struct omap_overlay *ovl = omap_crtc->ovl;
- struct omap_overlay_info *info = &omap_crtc->info;
- int ret;
-
- DBG("%s", omap_crtc->ovl->name);
- DBG("%dx%d -> %dx%d (%d)", info->width, info->height, info->out_width,
- info->out_height, info->screen_width);
- DBG("%d,%d %08x", info->pos_x, info->pos_y, info->paddr);
-
- /* NOTE: do we want to do this at all here, or just wait
- * for dpms(ON) since other CRTC's may not have their mode
- * set yet, so fb dimensions may still change..
- */
- ret = ovl->set_overlay_info(ovl, info);
- if (ret) {
- dev_err(dev->dev, "could not set overlay info\n");
- return ret;
- }
-
- /* our encoder doesn't necessarily get a commit() after this, in
- * particular in the dpms() and mode_set_base() cases, so force the
- * manager to update:
- *
- * could this be in the encoder somehow?
- */
- if (ovl->manager) {
- ret = ovl->manager->apply(ovl->manager);
- if (ret) {
- dev_err(dev->dev, "could not apply settings\n");
- return ret;
- }
- }
-
- if (info->enabled) {
- omap_framebuffer_flush(crtc->fb, crtc->x, crtc->y,
- crtc->fb->width, crtc->fb->height);
- }
-
- return 0;
-}
-
-/* update parameters that are dependent on the framebuffer dimensions and
- * position within the fb that this crtc scans out from. This is called
- * when framebuffer dimensions or x,y base may have changed, either due
- * to our mode, or a change in another crtc that is scanning out of the
- * same fb.
- */
-static void update_scanout(struct drm_crtc *crtc)
-{
- struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- dma_addr_t paddr;
- unsigned int screen_width;
-
- omap_framebuffer_get_buffer(crtc->fb, crtc->x, crtc->y,
- NULL, &paddr, &screen_width);
-
- DBG("%s: %d,%d: %08x (%d)", omap_crtc->ovl->name,
- crtc->x, crtc->y, (u32)paddr, screen_width);
-
- omap_crtc->info.paddr = paddr;
- omap_crtc->info.screen_width = screen_width;
-}
-
static void omap_crtc_gamma_set(struct drm_crtc *crtc,
u16 *red, u16 *green, u16 *blue, uint32_t start, uint32_t size)
{
- struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- DBG("%s", omap_crtc->ovl->name);
+ /* not supported.. at least not yet */
}
static void omap_crtc_destroy(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- DBG("%s", omap_crtc->ovl->name);
+ omap_crtc->plane->funcs->destroy(omap_crtc->plane);
drm_crtc_cleanup(crtc);
kfree(omap_crtc);
}
static void omap_crtc_dpms(struct drm_crtc *crtc, int mode)
{
+ struct omap_drm_private *priv = crtc->dev->dev_private;
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ int i;
- DBG("%s: %d", omap_crtc->ovl->name, mode);
+ WARN_ON(omap_plane_dpms(omap_crtc->plane, mode));
- if (mode == DRM_MODE_DPMS_ON) {
- update_scanout(crtc);
- omap_crtc->info.enabled = true;
- } else {
- omap_crtc->info.enabled = false;
+ for (i = 0; i < priv->num_planes; i++) {
+ struct drm_plane *plane = priv->planes[i];
+ if (plane->crtc == crtc)
+ WARN_ON(omap_plane_dpms(plane, mode));
}
-
- WARN_ON(commit(crtc));
}
static bool omap_crtc_mode_fixup(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
{
- struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- DBG("%s", omap_crtc->ovl->name);
return true;
}
static int omap_crtc_mode_set(struct drm_crtc *crtc,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode,
- int x, int y,
- struct drm_framebuffer *old_fb)
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode,
+ int x, int y,
+ struct drm_framebuffer *old_fb)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct drm_plane *plane = omap_crtc->plane;
- DBG("%s: %d,%d: %dx%d", omap_crtc->ovl->name, x, y,
- mode->hdisplay, mode->vdisplay);
-
- /* just use adjusted mode */
- mode = adjusted_mode;
-
- omap_crtc->info.width = mode->hdisplay;
- omap_crtc->info.height = mode->vdisplay;
- omap_crtc->info.out_width = mode->hdisplay;
- omap_crtc->info.out_height = mode->vdisplay;
- omap_crtc->info.color_mode = OMAP_DSS_COLOR_RGB24U;
- omap_crtc->info.rotation_type = OMAP_DSS_ROT_DMA;
- omap_crtc->info.rotation = OMAP_DSS_ROT_0;
- omap_crtc->info.global_alpha = 0xff;
- omap_crtc->info.mirror = 0;
- omap_crtc->info.mirror = 0;
- omap_crtc->info.pos_x = 0;
- omap_crtc->info.pos_y = 0;
-#if 0 /* re-enable when these are available in DSS2 driver */
- omap_crtc->info.zorder = 3; /* GUI in the front, video behind */
- omap_crtc->info.min_x_decim = 1;
- omap_crtc->info.max_x_decim = 1;
- omap_crtc->info.min_y_decim = 1;
- omap_crtc->info.max_y_decim = 1;
-#endif
-
- update_scanout(crtc);
-
- return 0;
+ return plane->funcs->update_plane(plane, crtc, crtc->fb,
+ 0, 0, mode->hdisplay, mode->vdisplay,
+ x << 16, y << 16,
+ mode->hdisplay << 16, mode->vdisplay << 16);
}
static void omap_crtc_prepare(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- struct omap_overlay *ovl = omap_crtc->ovl;
-
- DBG("%s", omap_crtc->ovl->name);
-
- ovl->get_overlay_info(ovl, &omap_crtc->info);
-
+ DBG("%s", omap_crtc->name);
omap_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
}
static void omap_crtc_commit(struct drm_crtc *crtc)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- DBG("%s", omap_crtc->ovl->name);
+ DBG("%s", omap_crtc->name);
omap_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
}
static int omap_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
- struct drm_framebuffer *old_fb)
+ struct drm_framebuffer *old_fb)
{
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
+ struct drm_plane *plane = omap_crtc->plane;
+ struct drm_display_mode *mode = &crtc->mode;
- DBG("%s %d,%d: fb=%p", omap_crtc->ovl->name, x, y, old_fb);
-
- update_scanout(crtc);
-
- return commit(crtc);
+ return plane->funcs->update_plane(plane, crtc, crtc->fb,
+ 0, 0, mode->hdisplay, mode->vdisplay,
+ x << 16, y << 16,
+ mode->hdisplay << 16, mode->vdisplay << 16);
}
static void omap_crtc_load_lut(struct drm_crtc *crtc)
{
- struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- DBG("%s", omap_crtc->ovl->name);
}
static void page_flip_cb(void *arg)
struct drm_device *dev = crtc->dev;
struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
struct drm_pending_vblank_event *event = omap_crtc->event;
+ struct drm_framebuffer *old_fb = omap_crtc->old_fb;
struct timeval now;
unsigned long flags;
WARN_ON(!event);
omap_crtc->event = NULL;
+ omap_crtc->old_fb = NULL;
- update_scanout(crtc);
- WARN_ON(commit(crtc));
+ omap_crtc_mode_set_base(crtc, crtc->x, crtc->y, old_fb);
/* wakeup userspace */
/* TODO: this should happen *after* flip in vsync IRQ handler */
return -EINVAL;
}
- crtc->fb = fb;
+ omap_crtc->old_fb = crtc->fb;
omap_crtc->event = event;
+ crtc->fb = fb;
omap_gem_op_async(omap_framebuffer_bo(fb), OMAP_GEM_READ,
page_flip_cb, crtc);
.load_lut = omap_crtc_load_lut,
};
-struct omap_overlay *omap_crtc_get_overlay(struct drm_crtc *crtc)
-{
- struct omap_crtc *omap_crtc = to_omap_crtc(crtc);
- return omap_crtc->ovl;
-}
-
/* initialize crtc */
struct drm_crtc *omap_crtc_init(struct drm_device *dev,
struct omap_overlay *ovl, int id)
goto fail;
}
- omap_crtc->ovl = ovl;
- omap_crtc->id = id;
crtc = &omap_crtc->base;
+
+ omap_crtc->plane = omap_plane_init(dev, ovl, (1 << id), true);
+ omap_crtc->plane->crtc = crtc;
+ omap_crtc->name = ovl->name;
+ omap_crtc->id = id;
+
drm_crtc_init(dev, crtc, &omap_crtc_funcs);
drm_crtc_helper_add(crtc, &omap_crtc_helper_funcs);
struct omap_overlay_manager *mgr = NULL;
struct drm_crtc *crtc;
- if (ovl->manager) {
- DBG("disconnecting %s from %s", ovl->name,
- ovl->manager->name);
- ovl->unset_manager(ovl);
- }
-
/* find next best connector, ones with detected connection first
*/
while (*j < priv->num_connectors && !mgr) {
(*j)++;
}
- if (mgr) {
- DBG("connecting %s to %s", ovl->name, mgr->name);
- ovl->set_manager(ovl, mgr);
- }
-
crtc = omap_crtc_init(dev, ovl, priv->num_crtcs);
if (!crtc) {
return 0;
}
+static int create_plane(struct drm_device *dev, struct omap_overlay *ovl,
+ unsigned int possible_crtcs)
+{
+ struct omap_drm_private *priv = dev->dev_private;
+ struct drm_plane *plane =
+ omap_plane_init(dev, ovl, possible_crtcs, false);
+
+ if (!plane) {
+ dev_err(dev->dev, "could not create plane: %s\n",
+ ovl->name);
+ return -ENOMEM;
+ }
+
+ BUG_ON(priv->num_planes >= ARRAY_SIZE(priv->planes));
+
+ priv->planes[priv->num_planes++] = plane;
+
+ return 0;
+}
+
static int match_dev_name(struct omap_dss_device *dssdev, void *data)
{
return !strcmp(dssdev->name, data);
omap_dss_get_overlay(kms_pdata->ovl_ids[i]);
create_crtc(dev, ovl, &j, connected_connectors);
}
+
+ for (i = 0; i < kms_pdata->pln_cnt; i++) {
+ struct omap_overlay *ovl =
+ omap_dss_get_overlay(kms_pdata->pln_ids[i]);
+ create_plane(dev, ovl, (1 << priv->num_crtcs) - 1);
+ }
} else {
/* otherwise just grab up to CONFIG_DRM_OMAP_NUM_CRTCS and try
* to make educated guesses about everything else
create_crtc(dev, omap_dss_get_overlay(i),
&j, connected_connectors);
}
+
+ /* use any remaining overlays as drm planes */
+ for (; i < omap_dss_get_num_overlays(); i++) {
+ struct omap_overlay *ovl = omap_dss_get_overlay(i);
+ create_plane(dev, ovl, (1 << priv->num_crtcs) - 1);
+ }
}
/* for now keep the mapping of CRTCs and encoders static.. */
struct omap_overlay_manager *mgr =
omap_encoder_get_manager(encoder);
- encoder->possible_crtcs = 0;
-
- for (j = 0; j < priv->num_crtcs; j++) {
- struct omap_overlay *ovl =
- omap_crtc_get_overlay(priv->crtcs[j]);
- if (ovl->manager == mgr) {
- encoder->possible_crtcs |= (1 << j);
- }
- }
+ encoder->possible_crtcs = (1 << priv->num_crtcs) - 1;
DBG("%s: possible_crtcs=%08x", mgr->name,
encoder->possible_crtcs);
struct omap_drm_private {
unsigned int num_crtcs;
struct drm_crtc *crtcs[8];
+ unsigned int num_planes;
+ struct drm_plane *planes[8];
unsigned int num_encoders;
struct drm_encoder *encoders[8];
unsigned int num_connectors;
struct drm_crtc *omap_crtc_init(struct drm_device *dev,
struct omap_overlay *ovl, int id);
-struct omap_overlay *omap_crtc_get_overlay(struct drm_crtc *crtc);
+
+struct drm_plane *omap_plane_init(struct drm_device *dev,
+ struct omap_overlay *ovl, unsigned int possible_crtcs,
+ bool priv);
+int omap_plane_dpms(struct drm_plane *plane, int mode);
struct drm_encoder *omap_encoder_init(struct drm_device *dev,
struct omap_overlay_manager *mgr);
--- /dev/null
+/*
+ * drivers/staging/omapdrm/omap_plane.c
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Author: Rob Clark <rob.clark@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "omap_drv.h"
+
+/* some hackery because omapdss has an 'enum omap_plane' (which would be
+ * better named omap_plane_id).. and compiler seems unhappy about having
+ * both a 'struct omap_plane' and 'enum omap_plane'
+ */
+#define omap_plane _omap_plane
+
+/*
+ * plane funcs
+ */
+
+#define to_omap_plane(x) container_of(x, struct omap_plane, base)
+
+struct omap_plane {
+ struct drm_plane base;
+ struct omap_overlay *ovl;
+ struct omap_overlay_info info;
+
+ /* Source values, converted to integers because we don't support
+ * fractional positions:
+ */
+ unsigned int src_x, src_y;
+};
+
+
+/* push changes down to dss2 */
+static int commit(struct drm_plane *plane)
+{
+ struct drm_device *dev = plane->dev;
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+ struct omap_overlay *ovl = omap_plane->ovl;
+ struct omap_overlay_info *info = &omap_plane->info;
+ int ret;
+
+ DBG("%s", ovl->name);
+ DBG("%dx%d -> %dx%d (%d)", info->width, info->height, info->out_width,
+ info->out_height, info->screen_width);
+ DBG("%d,%d %08x", info->pos_x, info->pos_y, info->paddr);
+
+ /* NOTE: do we want to do this at all here, or just wait
+ * for dpms(ON) since other CRTC's may not have their mode
+ * set yet, so fb dimensions may still change..
+ */
+ ret = ovl->set_overlay_info(ovl, info);
+ if (ret) {
+ dev_err(dev->dev, "could not set overlay info\n");
+ return ret;
+ }
+
+ /* our encoder doesn't necessarily get a commit() after this, in
+ * particular in the dpms() and mode_set_base() cases, so force the
+ * manager to update:
+ *
+ * could this be in the encoder somehow?
+ */
+ if (ovl->manager) {
+ ret = ovl->manager->apply(ovl->manager);
+ if (ret) {
+ dev_err(dev->dev, "could not apply settings\n");
+ return ret;
+ }
+ }
+
+ if (info->enabled) {
+ omap_framebuffer_flush(plane->fb, info->pos_x, info->pos_y,
+ info->out_width, info->out_height);
+ }
+
+ return 0;
+}
+
+/* when CRTC that we are attached to has potentially changed, this checks
+ * if we are attached to proper manager, and if necessary updates.
+ */
+static void update_manager(struct drm_plane *plane)
+{
+ struct omap_drm_private *priv = plane->dev->dev_private;
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+ struct omap_overlay *ovl = omap_plane->ovl;
+ struct omap_overlay_manager *mgr = NULL;
+ int i;
+
+ if (plane->crtc) {
+ for (i = 0; i < priv->num_encoders; i++) {
+ struct drm_encoder *encoder = priv->encoders[i];
+ if (encoder->crtc == plane->crtc) {
+ mgr = omap_encoder_get_manager(encoder);
+ break;
+ }
+ }
+ }
+
+ if (ovl->manager != mgr) {
+ bool enabled = omap_plane->info.enabled;
+
+ /* don't switch things around with enabled overlays: */
+ if (enabled)
+ omap_plane_dpms(plane, DRM_MODE_DPMS_OFF);
+
+ if (ovl->manager) {
+ DBG("disconnecting %s from %s", ovl->name,
+ ovl->manager->name);
+ ovl->unset_manager(ovl);
+ }
+
+ if (mgr) {
+ DBG("connecting %s to %s", ovl->name, mgr->name);
+ ovl->set_manager(ovl, mgr);
+ }
+
+ if (enabled && mgr)
+ omap_plane_dpms(plane, DRM_MODE_DPMS_ON);
+ }
+}
+
+/* update parameters that are dependent on the framebuffer dimensions and
+ * position within the fb that this plane scans out from. This is called
+ * when framebuffer or x,y base may have changed.
+ */
+static void update_scanout(struct drm_plane *plane)
+{
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+ unsigned int screen_width; /* really means "pitch" */
+ dma_addr_t paddr;
+
+ omap_framebuffer_get_buffer(plane->fb,
+ omap_plane->src_x, omap_plane->src_y,
+ NULL, &paddr, &screen_width);
+
+ DBG("%s: %d,%d: %08x (%d)", omap_plane->ovl->name,
+ omap_plane->src_x, omap_plane->src_y,
+ (u32)paddr, screen_width);
+
+ omap_plane->info.paddr = paddr;
+ omap_plane->info.screen_width = screen_width;
+}
+
+static int omap_plane_update(struct drm_plane *plane,
+ struct drm_crtc *crtc, struct drm_framebuffer *fb,
+ int crtc_x, int crtc_y,
+ unsigned int crtc_w, unsigned int crtc_h,
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h)
+{
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+
+ /* src values are in Q16 fixed point, convert to integer: */
+ src_x = src_x >> 16;
+ src_y = src_y >> 16;
+ src_w = src_w >> 16;
+ src_h = src_h >> 16;
+
+ omap_plane->info.enabled = true;
+ omap_plane->info.pos_x = crtc_x;
+ omap_plane->info.pos_y = crtc_y;
+ omap_plane->info.out_width = crtc_w;
+ omap_plane->info.out_height = crtc_h;
+ omap_plane->info.width = src_w;
+ omap_plane->info.height = src_h;
+ omap_plane->src_x = src_x;
+ omap_plane->src_y = src_y;
+
+ /* note: this is done after this fxn returns.. but if we need
+ * to do a commit/update_scanout, etc before this returns we
+ * need the current value.
+ */
+ plane->fb = fb;
+ plane->crtc = crtc;
+
+ update_scanout(plane);
+ update_manager(plane);
+ commit(plane);
+
+ return 0;
+}
+
+static int omap_plane_disable(struct drm_plane *plane)
+{
+ return omap_plane_dpms(plane, DRM_MODE_DPMS_OFF);
+}
+
+static void omap_plane_destroy(struct drm_plane *plane)
+{
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+ DBG("%s", omap_plane->ovl->name);
+ omap_plane_disable(plane);
+ drm_plane_cleanup(plane);
+ kfree(omap_plane);
+}
+
+int omap_plane_dpms(struct drm_plane *plane, int mode)
+{
+ struct omap_plane *omap_plane = to_omap_plane(plane);
+
+ DBG("%s: %d", omap_plane->ovl->name, mode);
+
+ if (mode == DRM_MODE_DPMS_ON) {
+ update_scanout(plane);
+ omap_plane->info.enabled = true;
+ } else {
+ omap_plane->info.enabled = false;
+ }
+
+ return commit(plane);
+}
+
+static const struct drm_plane_funcs omap_plane_funcs = {
+ .update_plane = omap_plane_update,
+ .disable_plane = omap_plane_disable,
+ .destroy = omap_plane_destroy,
+};
+
+static const uint32_t formats[] = {
+ DRM_FORMAT_RGB565,
+ DRM_FORMAT_RGBX4444,
+ DRM_FORMAT_XRGB4444,
+ DRM_FORMAT_RGBA4444,
+ DRM_FORMAT_ABGR4444,
+ DRM_FORMAT_XRGB1555,
+ DRM_FORMAT_ARGB1555,
+ DRM_FORMAT_RGB888,
+ DRM_FORMAT_RGBX8888,
+ DRM_FORMAT_XRGB8888,
+ DRM_FORMAT_RGBA8888,
+ DRM_FORMAT_ARGB8888,
+ DRM_FORMAT_NV12,
+ DRM_FORMAT_YUYV,
+ DRM_FORMAT_UYVY,
+};
+
+/* initialize plane */
+struct drm_plane *omap_plane_init(struct drm_device *dev,
+ struct omap_overlay *ovl, unsigned int possible_crtcs,
+ bool priv)
+{
+ struct drm_plane *plane = NULL;
+ struct omap_plane *omap_plane;
+
+ DBG("%s: possible_crtcs=%08x, priv=%d", ovl->name,
+ possible_crtcs, priv);
+
+ omap_plane = kzalloc(sizeof(*omap_plane), GFP_KERNEL);
+ if (!omap_plane) {
+ dev_err(dev->dev, "could not allocate plane\n");
+ goto fail;
+ }
+
+ omap_plane->ovl = ovl;
+ plane = &omap_plane->base;
+
+ drm_plane_init(dev, plane, possible_crtcs, &omap_plane_funcs,
+ formats, ARRAY_SIZE(formats), priv);
+
+ /* get our starting configuration, set defaults for parameters
+ * we don't currently use, etc:
+ */
+ ovl->get_overlay_info(ovl, &omap_plane->info);
+ omap_plane->info.rotation_type = OMAP_DSS_ROT_DMA;
+ omap_plane->info.rotation = OMAP_DSS_ROT_0;
+ omap_plane->info.global_alpha = 0xff;
+ omap_plane->info.mirror = 0;
+ omap_plane->info.mirror = 0;
+
+ /* Set defaults depending on whether we are a CRTC or overlay
+ * layer.
+ * TODO add ioctl to give userspace an API to change this.. this
+ * will come in a subsequent patch.
+ */
+ if (priv)
+ omap_plane->info.zorder = 0;
+ else
+ omap_plane->info.zorder = 1;
+
+ /* TODO color mode should come from fb.. this will come in a
+ * subsequent patch
+ */
+ omap_plane->info.color_mode = OMAP_DSS_COLOR_RGB24U;
+
+ update_manager(plane);
+
+ return plane;
+
+fail:
+ if (plane) {
+ omap_plane_destroy(plane);
+ }
+ return NULL;
+}
* pipes/overlays/CRTCs are used.. if this is not provided, then instead the
* first CONFIG_DRM_OMAP_NUM_CRTCS are used, and they are each connected to
* one manager, with priority given to managers that are connected to
- * detected devices. This should be a good default behavior for most cases,
- * but yet there still might be times when you wish to do something different.
+ * detected devices. Remaining overlays are used as video planes. This
+ * should be a good default behavior for most cases, but yet there still
+ * might be times when you wish to do something different.
*/
struct omap_kms_platform_data {
+ /* overlays to use as CRTCs: */
int ovl_cnt;
const int *ovl_ids;
+
+ /* overlays to use as video planes: */
+ int pln_cnt;
+ const int *pln_ids;
+
int mgr_cnt;
const int *mgr_ids;
+
int dev_cnt;
const char **dev_names;
};
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff