source "drivers/staging/tty/Kconfig"
-source "drivers/staging/generic_serial/Kconfig"
-
source "drivers/staging/et131x/Kconfig"
source "drivers/staging/slicoss/Kconfig"
obj-$(CONFIG_STAGING) += staging.o
obj-y += tty/
-obj-y += generic_serial/
obj-$(CONFIG_ET131X) += et131x/
obj-$(CONFIG_SLICOSS) += slicoss/
obj-$(CONFIG_VIDEO_GO7007) += go7007/
+++ /dev/null
-config A2232
- tristate "Commodore A2232 serial support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && ZORRO && BROKEN
- ---help---
- This option supports the 2232 7-port serial card shipped with the
- Amiga 2000 and other Zorro-bus machines, dating from 1989. At
- a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
- each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
- ports were connected with 8 pin DIN connectors on the card bracket,
- for which 8 pin to DB25 adapters were supplied. The card also had
- jumpers internally to toggle various pinning configurations.
-
- This driver can be built as a module; but then "generic_serial"
- will also be built as a module. This has to be loaded before
- "ser_a2232". If you want to do this, answer M here.
-
-config SX
- tristate "Specialix SX (and SI) card support"
- depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN
- help
- This is a driver for the SX and SI multiport serial cards.
- Please read the file <file:Documentation/serial/sx.txt> for details.
-
- This driver can only be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called sx. If you want to do that, say M here.
-
-config RIO
- tristate "Specialix RIO system support"
- depends on SERIAL_NONSTANDARD && BROKEN
- help
- This is a driver for the Specialix RIO, a smart serial card which
- drives an outboard box that can support up to 128 ports. Product
- information is at <http://www.perle.com/support/documentation.html#multiport>.
- There are both ISA and PCI versions.
-
-config RIO_OLDPCI
- bool "Support really old RIO/PCI cards"
- depends on RIO
- help
- Older RIO PCI cards need some initialization-time configuration to
- determine the IRQ and some control addresses. If you have a RIO and
- this doesn't seem to work, try setting this to Y.
-
-
+++ /dev/null
-obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o
-obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o
-obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o
-obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o
-obj-$(CONFIG_SX) += sx.o generic_serial.o
-obj-$(CONFIG_RIO) += rio/ generic_serial.o
+++ /dev/null
-These are a few tty/serial drivers that either do not build,
-or work if they do build, or if they seem to work, are for obsolete
-hardware, or are full of unfixable races and no one uses them anymore.
-
-If no one steps up to adopt any of these drivers, they will be removed
-in the 2.6.41 release.
+++ /dev/null
-/*
- * generic_serial.c
- *
- * Copyright (C) 1998/1999 R.E.Wolff@BitWizard.nl
- *
- * written for the SX serial driver.
- * Contains the code that should be shared over all the serial drivers.
- *
- * Credit for the idea to do it this way might go to Alan Cox.
- *
- *
- * Version 0.1 -- December, 1998. Initial version.
- * Version 0.2 -- March, 1999. Some more routines. Bugfixes. Etc.
- * Version 0.5 -- August, 1999. Some more fixes. Reformat for Linus.
- *
- * BitWizard is actively maintaining this file. We sometimes find
- * that someone submitted changes to this file. We really appreciate
- * your help, but please submit changes through us. We're doing our
- * best to be responsive. -- REW
- * */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/sched.h>
-#include <linux/serial.h>
-#include <linux/mm.h>
-#include <linux/generic_serial.h>
-#include <linux/interrupt.h>
-#include <linux/tty_flip.h>
-#include <linux/delay.h>
-#include <linux/gfp.h>
-#include <asm/uaccess.h>
-
-#define DEBUG
-
-static int gs_debug;
-
-#ifdef DEBUG
-#define gs_dprintk(f, str...) if (gs_debug & f) printk (str)
-#else
-#define gs_dprintk(f, str...) /* nothing */
-#endif
-
-#define func_enter() gs_dprintk (GS_DEBUG_FLOW, "gs: enter %s\n", __func__)
-#define func_exit() gs_dprintk (GS_DEBUG_FLOW, "gs: exit %s\n", __func__)
-
-#define RS_EVENT_WRITE_WAKEUP 1
-
-module_param(gs_debug, int, 0644);
-
-
-int gs_put_char(struct tty_struct * tty, unsigned char ch)
-{
- struct gs_port *port;
-
- func_enter ();
-
- port = tty->driver_data;
-
- if (!port) return 0;
-
- if (! (port->port.flags & ASYNC_INITIALIZED)) return 0;
-
- /* Take a lock on the serial tranmit buffer! */
- mutex_lock(& port->port_write_mutex);
-
- if (port->xmit_cnt >= SERIAL_XMIT_SIZE - 1) {
- /* Sorry, buffer is full, drop character. Update statistics???? -- REW */
- mutex_unlock(&port->port_write_mutex);
- return 0;
- }
-
- port->xmit_buf[port->xmit_head++] = ch;
- port->xmit_head &= SERIAL_XMIT_SIZE - 1;
- port->xmit_cnt++; /* Characters in buffer */
-
- mutex_unlock(&port->port_write_mutex);
- func_exit ();
- return 1;
-}
-
-
-/*
-> Problems to take into account are:
-> -1- Interrupts that empty part of the buffer.
-> -2- page faults on the access to userspace.
-> -3- Other processes that are also trying to do a "write".
-*/
-
-int gs_write(struct tty_struct * tty,
- const unsigned char *buf, int count)
-{
- struct gs_port *port;
- int c, total = 0;
- int t;
-
- func_enter ();
-
- port = tty->driver_data;
-
- if (!port) return 0;
-
- if (! (port->port.flags & ASYNC_INITIALIZED))
- return 0;
-
- /* get exclusive "write" access to this port (problem 3) */
- /* This is not a spinlock because we can have a disk access (page
- fault) in copy_from_user */
- mutex_lock(& port->port_write_mutex);
-
- while (1) {
-
- c = count;
-
- /* This is safe because we "OWN" the "head". No one else can
- change the "head": we own the port_write_mutex. */
- /* Don't overrun the end of the buffer */
- t = SERIAL_XMIT_SIZE - port->xmit_head;
- if (t < c) c = t;
-
- /* This is safe because the xmit_cnt can only decrease. This
- would increase "t", so we might copy too little chars. */
- /* Don't copy past the "head" of the buffer */
- t = SERIAL_XMIT_SIZE - 1 - port->xmit_cnt;
- if (t < c) c = t;
-
- /* Can't copy more? break out! */
- if (c <= 0) break;
-
- memcpy (port->xmit_buf + port->xmit_head, buf, c);
-
- port -> xmit_cnt += c;
- port -> xmit_head = (port->xmit_head + c) & (SERIAL_XMIT_SIZE -1);
- buf += c;
- count -= c;
- total += c;
- }
- mutex_unlock(& port->port_write_mutex);
-
- gs_dprintk (GS_DEBUG_WRITE, "write: interrupts are %s\n",
- (port->port.flags & GS_TX_INTEN)?"enabled": "disabled");
-
- if (port->xmit_cnt &&
- !tty->stopped &&
- !tty->hw_stopped &&
- !(port->port.flags & GS_TX_INTEN)) {
- port->port.flags |= GS_TX_INTEN;
- port->rd->enable_tx_interrupts (port);
- }
- func_exit ();
- return total;
-}
-
-
-
-int gs_write_room(struct tty_struct * tty)
-{
- struct gs_port *port = tty->driver_data;
- int ret;
-
- func_enter ();
- ret = SERIAL_XMIT_SIZE - port->xmit_cnt - 1;
- if (ret < 0)
- ret = 0;
- func_exit ();
- return ret;
-}
-
-
-int gs_chars_in_buffer(struct tty_struct *tty)
-{
- struct gs_port *port = tty->driver_data;
- func_enter ();
-
- func_exit ();
- return port->xmit_cnt;
-}
-
-
-static int gs_real_chars_in_buffer(struct tty_struct *tty)
-{
- struct gs_port *port;
- func_enter ();
-
- port = tty->driver_data;
-
- if (!port->rd) return 0;
- if (!port->rd->chars_in_buffer) return 0;
-
- func_exit ();
- return port->xmit_cnt + port->rd->chars_in_buffer (port);
-}
-
-
-static int gs_wait_tx_flushed (void * ptr, unsigned long timeout)
-{
- struct gs_port *port = ptr;
- unsigned long end_jiffies;
- int jiffies_to_transmit, charsleft = 0, rv = 0;
- int rcib;
-
- func_enter();
-
- gs_dprintk (GS_DEBUG_FLUSH, "port=%p.\n", port);
- if (port) {
- gs_dprintk (GS_DEBUG_FLUSH, "xmit_cnt=%x, xmit_buf=%p, tty=%p.\n",
- port->xmit_cnt, port->xmit_buf, port->port.tty);
- }
-
- if (!port || port->xmit_cnt < 0 || !port->xmit_buf) {
- gs_dprintk (GS_DEBUG_FLUSH, "ERROR: !port, !port->xmit_buf or prot->xmit_cnt < 0.\n");
- func_exit();
- return -EINVAL; /* This is an error which we don't know how to handle. */
- }
-
- rcib = gs_real_chars_in_buffer(port->port.tty);
-
- if(rcib <= 0) {
- gs_dprintk (GS_DEBUG_FLUSH, "nothing to wait for.\n");
- func_exit();
- return rv;
- }
- /* stop trying: now + twice the time it would normally take + seconds */
- if (timeout == 0) timeout = MAX_SCHEDULE_TIMEOUT;
- end_jiffies = jiffies;
- if (timeout != MAX_SCHEDULE_TIMEOUT)
- end_jiffies += port->baud?(2 * rcib * 10 * HZ / port->baud):0;
- end_jiffies += timeout;
-
- gs_dprintk (GS_DEBUG_FLUSH, "now=%lx, end=%lx (%ld).\n",
- jiffies, end_jiffies, end_jiffies-jiffies);
-
- /* the expression is actually jiffies < end_jiffies, but that won't
- work around the wraparound. Tricky eh? */
- while ((charsleft = gs_real_chars_in_buffer (port->port.tty)) &&
- time_after (end_jiffies, jiffies)) {
- /* Units check:
- chars * (bits/char) * (jiffies /sec) / (bits/sec) = jiffies!
- check! */
-
- charsleft += 16; /* Allow 16 chars more to be transmitted ... */
- jiffies_to_transmit = port->baud?(1 + charsleft * 10 * HZ / port->baud):0;
- /* ^^^ Round up.... */
- if (jiffies_to_transmit <= 0) jiffies_to_transmit = 1;
-
- gs_dprintk (GS_DEBUG_FLUSH, "Expect to finish in %d jiffies "
- "(%d chars).\n", jiffies_to_transmit, charsleft);
-
- msleep_interruptible(jiffies_to_msecs(jiffies_to_transmit));
- if (signal_pending (current)) {
- gs_dprintk (GS_DEBUG_FLUSH, "Signal pending. Bombing out: ");
- rv = -EINTR;
- break;
- }
- }
-
- gs_dprintk (GS_DEBUG_FLUSH, "charsleft = %d.\n", charsleft);
- set_current_state (TASK_RUNNING);
-
- func_exit();
- return rv;
-}
-
-
-
-void gs_flush_buffer(struct tty_struct *tty)
-{
- struct gs_port *port;
- unsigned long flags;
-
- func_enter ();
-
- port = tty->driver_data;
-
- if (!port) return;
-
- /* XXX Would the write semaphore do? */
- spin_lock_irqsave (&port->driver_lock, flags);
- port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- spin_unlock_irqrestore (&port->driver_lock, flags);
-
- tty_wakeup(tty);
- func_exit ();
-}
-
-
-void gs_flush_chars(struct tty_struct * tty)
-{
- struct gs_port *port;
-
- func_enter ();
-
- port = tty->driver_data;
-
- if (!port) return;
-
- if (port->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
- !port->xmit_buf) {
- func_exit ();
- return;
- }
-
- /* Beats me -- REW */
- port->port.flags |= GS_TX_INTEN;
- port->rd->enable_tx_interrupts (port);
- func_exit ();
-}
-
-
-void gs_stop(struct tty_struct * tty)
-{
- struct gs_port *port;
-
- func_enter ();
-
- port = tty->driver_data;
-
- if (!port) return;
-
- if (port->xmit_cnt &&
- port->xmit_buf &&
- (port->port.flags & GS_TX_INTEN) ) {
- port->port.flags &= ~GS_TX_INTEN;
- port->rd->disable_tx_interrupts (port);
- }
- func_exit ();
-}
-
-
-void gs_start(struct tty_struct * tty)
-{
- struct gs_port *port;
-
- port = tty->driver_data;
-
- if (!port) return;
-
- if (port->xmit_cnt &&
- port->xmit_buf &&
- !(port->port.flags & GS_TX_INTEN) ) {
- port->port.flags |= GS_TX_INTEN;
- port->rd->enable_tx_interrupts (port);
- }
- func_exit ();
-}
-
-
-static void gs_shutdown_port (struct gs_port *port)
-{
- unsigned long flags;
-
- func_enter();
-
- if (!port) return;
-
- if (!(port->port.flags & ASYNC_INITIALIZED))
- return;
-
- spin_lock_irqsave(&port->driver_lock, flags);
-
- if (port->xmit_buf) {
- free_page((unsigned long) port->xmit_buf);
- port->xmit_buf = NULL;
- }
-
- if (port->port.tty)
- set_bit(TTY_IO_ERROR, &port->port.tty->flags);
-
- port->rd->shutdown_port (port);
-
- port->port.flags &= ~ASYNC_INITIALIZED;
- spin_unlock_irqrestore(&port->driver_lock, flags);
-
- func_exit();
-}
-
-
-void gs_hangup(struct tty_struct *tty)
-{
- struct gs_port *port;
- unsigned long flags;
-
- func_enter ();
-
- port = tty->driver_data;
- tty = port->port.tty;
- if (!tty)
- return;
-
- gs_shutdown_port (port);
- spin_lock_irqsave(&port->port.lock, flags);
- port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|GS_ACTIVE);
- port->port.tty = NULL;
- port->port.count = 0;
- spin_unlock_irqrestore(&port->port.lock, flags);
-
- wake_up_interruptible(&port->port.open_wait);
- func_exit ();
-}
-
-
-int gs_block_til_ready(void *port_, struct file * filp)
-{
- struct gs_port *gp = port_;
- struct tty_port *port = &gp->port;
- DECLARE_WAITQUEUE(wait, current);
- int retval;
- int do_clocal = 0;
- int CD;
- struct tty_struct *tty;
- unsigned long flags;
-
- func_enter ();
-
- if (!port) return 0;
-
- tty = port->tty;
-
- gs_dprintk (GS_DEBUG_BTR, "Entering gs_block_till_ready.\n");
- /*
- * If the device is in the middle of being closed, then block
- * until it's done, and then try again.
- */
- if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&port->close_wait);
- if (port->flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- else
- return -ERESTARTSYS;
- }
-
- gs_dprintk (GS_DEBUG_BTR, "after hung up\n");
-
- /*
- * If non-blocking mode is set, or the port is not enabled,
- * then make the check up front and then exit.
- */
- if ((filp->f_flags & O_NONBLOCK) ||
- (tty->flags & (1 << TTY_IO_ERROR))) {
- port->flags |= ASYNC_NORMAL_ACTIVE;
- return 0;
- }
-
- gs_dprintk (GS_DEBUG_BTR, "after nonblock\n");
-
- if (C_CLOCAL(tty))
- do_clocal = 1;
-
- /*
- * Block waiting for the carrier detect and the line to become
- * free (i.e., not in use by the callout). While we are in
- * this loop, port->count is dropped by one, so that
- * rs_close() knows when to free things. We restore it upon
- * exit, either normal or abnormal.
- */
- retval = 0;
-
- add_wait_queue(&port->open_wait, &wait);
-
- gs_dprintk (GS_DEBUG_BTR, "after add waitq.\n");
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp)) {
- port->count--;
- }
- port->blocked_open++;
- spin_unlock_irqrestore(&port->lock, flags);
- while (1) {
- CD = tty_port_carrier_raised(port);
- gs_dprintk (GS_DEBUG_BTR, "CD is now %d.\n", CD);
- set_current_state (TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) ||
- !(port->flags & ASYNC_INITIALIZED)) {
- if (port->flags & ASYNC_HUP_NOTIFY)
- retval = -EAGAIN;
- else
- retval = -ERESTARTSYS;
- break;
- }
- if (!(port->flags & ASYNC_CLOSING) &&
- (do_clocal || CD))
- break;
- gs_dprintk (GS_DEBUG_BTR, "signal_pending is now: %d (%lx)\n",
- (int)signal_pending (current), *(long*)(¤t->blocked));
- if (signal_pending(current)) {
- retval = -ERESTARTSYS;
- break;
- }
- schedule();
- }
- gs_dprintk (GS_DEBUG_BTR, "Got out of the loop. (%d)\n",
- port->blocked_open);
- set_current_state (TASK_RUNNING);
- remove_wait_queue(&port->open_wait, &wait);
-
- spin_lock_irqsave(&port->lock, flags);
- if (!tty_hung_up_p(filp)) {
- port->count++;
- }
- port->blocked_open--;
- if (retval == 0)
- port->flags |= ASYNC_NORMAL_ACTIVE;
- spin_unlock_irqrestore(&port->lock, flags);
- func_exit ();
- return retval;
-}
-
-
-void gs_close(struct tty_struct * tty, struct file * filp)
-{
- unsigned long flags;
- struct gs_port *port;
-
- func_enter ();
-
- port = tty->driver_data;
-
- if (!port) return;
-
- if (!port->port.tty) {
- /* This seems to happen when this is called from vhangup. */
- gs_dprintk (GS_DEBUG_CLOSE, "gs: Odd: port->port.tty is NULL\n");
- port->port.tty = tty;
- }
-
- spin_lock_irqsave(&port->port.lock, flags);
-
- if (tty_hung_up_p(filp)) {
- spin_unlock_irqrestore(&port->port.lock, flags);
- if (port->rd->hungup)
- port->rd->hungup (port);
- func_exit ();
- return;
- }
-
- if ((tty->count == 1) && (port->port.count != 1)) {
- printk(KERN_ERR "gs: gs_close port %p: bad port count;"
- " tty->count is 1, port count is %d\n", port, port->port.count);
- port->port.count = 1;
- }
- if (--port->port.count < 0) {
- printk(KERN_ERR "gs: gs_close port %p: bad port count: %d\n", port, port->port.count);
- port->port.count = 0;
- }
-
- if (port->port.count) {
- gs_dprintk(GS_DEBUG_CLOSE, "gs_close port %p: count: %d\n", port, port->port.count);
- spin_unlock_irqrestore(&port->port.lock, flags);
- func_exit ();
- return;
- }
- port->port.flags |= ASYNC_CLOSING;
-
- /*
- * Now we wait for the transmit buffer to clear; and we notify
- * the line discipline to only process XON/XOFF characters.
- */
- tty->closing = 1;
- /* if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, port->closing_wait); */
-
- /*
- * At this point we stop accepting input. To do this, we
- * disable the receive line status interrupts, and tell the
- * interrupt driver to stop checking the data ready bit in the
- * line status register.
- */
-
- spin_lock(&port->driver_lock);
- port->rd->disable_rx_interrupts (port);
- spin_unlock(&port->driver_lock);
- spin_unlock_irqrestore(&port->port.lock, flags);
-
- /* close has no way of returning "EINTR", so discard return value */
- if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- gs_wait_tx_flushed (port, port->closing_wait);
-
- port->port.flags &= ~GS_ACTIVE;
-
- gs_flush_buffer(tty);
-
- tty_ldisc_flush(tty);
- tty->closing = 0;
-
- spin_lock_irqsave(&port->driver_lock, flags);
- port->event = 0;
- port->rd->close (port);
- port->rd->shutdown_port (port);
- spin_unlock_irqrestore(&port->driver_lock, flags);
-
- spin_lock_irqsave(&port->port.lock, flags);
- port->port.tty = NULL;
-
- if (port->port.blocked_open) {
- if (port->close_delay) {
- spin_unlock_irqrestore(&port->port.lock, flags);
- msleep_interruptible(jiffies_to_msecs(port->close_delay));
- spin_lock_irqsave(&port->port.lock, flags);
- }
- wake_up_interruptible(&port->port.open_wait);
- }
- port->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING | ASYNC_INITIALIZED);
- spin_unlock_irqrestore(&port->port.lock, flags);
- wake_up_interruptible(&port->port.close_wait);
-
- func_exit ();
-}
-
-
-void gs_set_termios (struct tty_struct * tty,
- struct ktermios * old_termios)
-{
- struct gs_port *port;
- int baudrate, tmp, rv;
- struct ktermios *tiosp;
-
- func_enter();
-
- port = tty->driver_data;
-
- if (!port) return;
- if (!port->port.tty) {
- /* This seems to happen when this is called after gs_close. */
- gs_dprintk (GS_DEBUG_TERMIOS, "gs: Odd: port->port.tty is NULL\n");
- port->port.tty = tty;
- }
-
-
- tiosp = tty->termios;
-
- if (gs_debug & GS_DEBUG_TERMIOS) {
- gs_dprintk (GS_DEBUG_TERMIOS, "termios structure (%p):\n", tiosp);
- }
-
- if(old_termios && (gs_debug & GS_DEBUG_TERMIOS)) {
- if(tiosp->c_iflag != old_termios->c_iflag) printk("c_iflag changed\n");
- if(tiosp->c_oflag != old_termios->c_oflag) printk("c_oflag changed\n");
- if(tiosp->c_cflag != old_termios->c_cflag) printk("c_cflag changed\n");
- if(tiosp->c_lflag != old_termios->c_lflag) printk("c_lflag changed\n");
- if(tiosp->c_line != old_termios->c_line) printk("c_line changed\n");
- if(!memcmp(tiosp->c_cc, old_termios->c_cc, NCC)) printk("c_cc changed\n");
- }
-
- baudrate = tty_get_baud_rate(tty);
-
- if ((tiosp->c_cflag & CBAUD) == B38400) {
- if ( (port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
- baudrate = 57600;
- else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
- baudrate = 115200;
- else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
- baudrate = 230400;
- else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
- baudrate = 460800;
- else if ((port->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
- baudrate = (port->baud_base / port->custom_divisor);
- }
-
- /* I recommend using THIS instead of the mess in termios (and
- duplicating the above code). Next we should create a clean
- interface towards this variable. If your card supports arbitrary
- baud rates, (e.g. CD1400 or 16550 based cards) then everything
- will be very easy..... */
- port->baud = baudrate;
-
- /* Two timer ticks seems enough to wakeup something like SLIP driver */
- /* Baudrate/10 is cps. Divide by HZ to get chars per tick. */
- tmp = (baudrate / 10 / HZ) * 2;
-
- if (tmp < 0) tmp = 0;
- if (tmp >= SERIAL_XMIT_SIZE) tmp = SERIAL_XMIT_SIZE-1;
-
- port->wakeup_chars = tmp;
-
- /* We should really wait for the characters to be all sent before
- changing the settings. -- CAL */
- rv = gs_wait_tx_flushed (port, MAX_SCHEDULE_TIMEOUT);
- if (rv < 0) return /* rv */;
-
- rv = port->rd->set_real_termios(port);
- if (rv < 0) return /* rv */;
-
- if ((!old_termios ||
- (old_termios->c_cflag & CRTSCTS)) &&
- !( tiosp->c_cflag & CRTSCTS)) {
- tty->stopped = 0;
- gs_start(tty);
- }
-
-#ifdef tytso_patch_94Nov25_1726
- /* This "makes sense", Why is it commented out? */
-
- if (!(old_termios->c_cflag & CLOCAL) &&
- (tty->termios->c_cflag & CLOCAL))
- wake_up_interruptible(&port->gs.open_wait);
-#endif
-
- func_exit();
- return /* 0 */;
-}
-
-
-
-/* Must be called with interrupts enabled */
-int gs_init_port(struct gs_port *port)
-{
- unsigned long flags;
-
- func_enter ();
-
- if (port->port.flags & ASYNC_INITIALIZED) {
- func_exit ();
- return 0;
- }
- if (!port->xmit_buf) {
- /* We may sleep in get_zeroed_page() */
- unsigned long tmp;
-
- tmp = get_zeroed_page(GFP_KERNEL);
- spin_lock_irqsave (&port->driver_lock, flags);
- if (port->xmit_buf)
- free_page (tmp);
- else
- port->xmit_buf = (unsigned char *) tmp;
- spin_unlock_irqrestore(&port->driver_lock, flags);
- if (!port->xmit_buf) {
- func_exit ();
- return -ENOMEM;
- }
- }
-
- spin_lock_irqsave (&port->driver_lock, flags);
- if (port->port.tty)
- clear_bit(TTY_IO_ERROR, &port->port.tty->flags);
- mutex_init(&port->port_write_mutex);
- port->xmit_cnt = port->xmit_head = port->xmit_tail = 0;
- spin_unlock_irqrestore(&port->driver_lock, flags);
- gs_set_termios(port->port.tty, NULL);
- spin_lock_irqsave (&port->driver_lock, flags);
- port->port.flags |= ASYNC_INITIALIZED;
- port->port.flags &= ~GS_TX_INTEN;
-
- spin_unlock_irqrestore(&port->driver_lock, flags);
- func_exit ();
- return 0;
-}
-
-
-int gs_setserial(struct gs_port *port, struct serial_struct __user *sp)
-{
- struct serial_struct sio;
-
- if (copy_from_user(&sio, sp, sizeof(struct serial_struct)))
- return(-EFAULT);
-
- if (!capable(CAP_SYS_ADMIN)) {
- if ((sio.baud_base != port->baud_base) ||
- (sio.close_delay != port->close_delay) ||
- ((sio.flags & ~ASYNC_USR_MASK) !=
- (port->port.flags & ~ASYNC_USR_MASK)))
- return(-EPERM);
- }
-
- port->port.flags = (port->port.flags & ~ASYNC_USR_MASK) |
- (sio.flags & ASYNC_USR_MASK);
-
- port->baud_base = sio.baud_base;
- port->close_delay = sio.close_delay;
- port->closing_wait = sio.closing_wait;
- port->custom_divisor = sio.custom_divisor;
-
- gs_set_termios (port->port.tty, NULL);
-
- return 0;
-}
-
-
-/*****************************************************************************/
-
-/*
- * Generate the serial struct info.
- */
-
-int gs_getserial(struct gs_port *port, struct serial_struct __user *sp)
-{
- struct serial_struct sio;
-
- memset(&sio, 0, sizeof(struct serial_struct));
- sio.flags = port->port.flags;
- sio.baud_base = port->baud_base;
- sio.close_delay = port->close_delay;
- sio.closing_wait = port->closing_wait;
- sio.custom_divisor = port->custom_divisor;
- sio.hub6 = 0;
-
- /* If you want you can override these. */
- sio.type = PORT_UNKNOWN;
- sio.xmit_fifo_size = -1;
- sio.line = -1;
- sio.port = -1;
- sio.irq = -1;
-
- if (port->rd->getserial)
- port->rd->getserial (port, &sio);
-
- if (copy_to_user(sp, &sio, sizeof(struct serial_struct)))
- return -EFAULT;
- return 0;
-
-}
-
-
-void gs_got_break(struct gs_port *port)
-{
- func_enter ();
-
- tty_insert_flip_char(port->port.tty, 0, TTY_BREAK);
- tty_schedule_flip(port->port.tty);
- if (port->port.flags & ASYNC_SAK) {
- do_SAK (port->port.tty);
- }
-
- func_exit ();
-}
-
-
-EXPORT_SYMBOL(gs_put_char);
-EXPORT_SYMBOL(gs_write);
-EXPORT_SYMBOL(gs_write_room);
-EXPORT_SYMBOL(gs_chars_in_buffer);
-EXPORT_SYMBOL(gs_flush_buffer);
-EXPORT_SYMBOL(gs_flush_chars);
-EXPORT_SYMBOL(gs_stop);
-EXPORT_SYMBOL(gs_start);
-EXPORT_SYMBOL(gs_hangup);
-EXPORT_SYMBOL(gs_block_til_ready);
-EXPORT_SYMBOL(gs_close);
-EXPORT_SYMBOL(gs_set_termios);
-EXPORT_SYMBOL(gs_init_port);
-EXPORT_SYMBOL(gs_setserial);
-EXPORT_SYMBOL(gs_getserial);
-EXPORT_SYMBOL(gs_got_break);
-
-MODULE_LICENSE("GPL");
+++ /dev/null
-#
-# Makefile for the linux rio-subsystem.
-#
-# (C) R.E.Wolff@BitWizard.nl
-#
-# This file is GPL. See other files for the full Blurb. I'm lazy today.
-#
-
-obj-$(CONFIG_RIO) += rio.o
-
-rio-y := rio_linux.o rioinit.o rioboot.o riocmd.o rioctrl.o riointr.o \
- rioparam.o rioroute.o riotable.o riotty.o
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : board.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:07
-** Retrieved : 11/6/98 11:34:20
-**
-** ident @(#)board.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_board_h__
-#define __rio_board_h__
-
-/*
-** board.h contains the definitions for the *hardware* of the host cards.
-** It describes the memory overlay for the dual port RAM area.
-*/
-
-#define DP_SRAM1_SIZE 0x7C00
-#define DP_SRAM2_SIZE 0x0200
-#define DP_SRAM3_SIZE 0x7000
-#define DP_SCRATCH_SIZE 0x1000
-#define DP_PARMMAP_ADDR 0x01FE /* offset into SRAM2 */
-#define DP_STARTUP_ADDR 0x01F8 /* offset into SRAM2 */
-
-/*
-** The shape of the Host Control area, at offset 0x7C00, Write Only
-*/
-struct s_Ctrl {
- u8 DpCtl; /* 7C00 */
- u8 Dp_Unused2_[127];
- u8 DpIntSet; /* 7C80 */
- u8 Dp_Unused3_[127];
- u8 DpTpuReset; /* 7D00 */
- u8 Dp_Unused4_[127];
- u8 DpIntReset; /* 7D80 */
- u8 Dp_Unused5_[127];
-};
-
-/*
-** The PROM data area on the host (0x7C00), Read Only
-*/
-struct s_Prom {
- u16 DpSlxCode[2];
- u16 DpRev;
- u16 Dp_Unused6_;
- u16 DpUniq[4];
- u16 DpJahre;
- u16 DpWoche;
- u16 DpHwFeature[5];
- u16 DpOemId;
- u16 DpSiggy[16];
-};
-
-/*
-** Union of the Ctrl and Prom areas
-*/
-union u_CtrlProm { /* This is the control/PROM area (0x7C00) */
- struct s_Ctrl DpCtrl;
- struct s_Prom DpProm;
-};
-
-/*
-** The top end of memory!
-*/
-struct s_ParmMapS { /* Area containing Parm Map Pointer */
- u8 Dp_Unused8_[DP_PARMMAP_ADDR];
- u16 DpParmMapAd;
-};
-
-struct s_StartUpS {
- u8 Dp_Unused9_[DP_STARTUP_ADDR];
- u8 Dp_LongJump[0x4];
- u8 Dp_Unused10_[2];
- u8 Dp_ShortJump[0x2];
-};
-
-union u_Sram2ParmMap { /* This is the top of memory (0x7E00-0x7FFF) */
- u8 DpSramMem[DP_SRAM2_SIZE];
- struct s_ParmMapS DpParmMapS;
- struct s_StartUpS DpStartUpS;
-};
-
-/*
-** This is the DP RAM overlay.
-*/
-struct DpRam {
- u8 DpSram1[DP_SRAM1_SIZE]; /* 0000 - 7BFF */
- union u_CtrlProm DpCtrlProm; /* 7C00 - 7DFF */
- union u_Sram2ParmMap DpSram2ParmMap; /* 7E00 - 7FFF */
- u8 DpScratch[DP_SCRATCH_SIZE]; /* 8000 - 8FFF */
- u8 DpSram3[DP_SRAM3_SIZE]; /* 9000 - FFFF */
-};
-
-#define DpControl DpCtrlProm.DpCtrl.DpCtl
-#define DpSetInt DpCtrlProm.DpCtrl.DpIntSet
-#define DpResetTpu DpCtrlProm.DpCtrl.DpTpuReset
-#define DpResetInt DpCtrlProm.DpCtrl.DpIntReset
-
-#define DpSlx DpCtrlProm.DpProm.DpSlxCode
-#define DpRevision DpCtrlProm.DpProm.DpRev
-#define DpUnique DpCtrlProm.DpProm.DpUniq
-#define DpYear DpCtrlProm.DpProm.DpJahre
-#define DpWeek DpCtrlProm.DpProm.DpWoche
-#define DpSignature DpCtrlProm.DpProm.DpSiggy
-
-#define DpParmMapR DpSram2ParmMap.DpParmMapS.DpParmMapAd
-#define DpSram2 DpSram2ParmMap.DpSramMem
-
-#endif
+++ /dev/null
-/****************************************************************************
- ******* *******
- ******* CIRRUS.H *******
- ******* *******
- ****************************************************************************
-
- Author : Jeremy Rolls
- Date : 3 Aug 1990
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef _cirrus_h
-#define _cirrus_h 1
-
-/* Bit fields for particular registers shared with driver */
-
-/* COR1 - driver and RTA */
-#define RIOC_COR1_ODD 0x80 /* Odd parity */
-#define RIOC_COR1_EVEN 0x00 /* Even parity */
-#define RIOC_COR1_NOP 0x00 /* No parity */
-#define RIOC_COR1_FORCE 0x20 /* Force parity */
-#define RIOC_COR1_NORMAL 0x40 /* With parity */
-#define RIOC_COR1_1STOP 0x00 /* 1 stop bit */
-#define RIOC_COR1_15STOP 0x04 /* 1.5 stop bits */
-#define RIOC_COR1_2STOP 0x08 /* 2 stop bits */
-#define RIOC_COR1_5BITS 0x00 /* 5 data bits */
-#define RIOC_COR1_6BITS 0x01 /* 6 data bits */
-#define RIOC_COR1_7BITS 0x02 /* 7 data bits */
-#define RIOC_COR1_8BITS 0x03 /* 8 data bits */
-
-#define RIOC_COR1_HOST 0xef /* Safe host bits */
-
-/* RTA only */
-#define RIOC_COR1_CINPCK 0x00 /* Check parity of received characters */
-#define RIOC_COR1_CNINPCK 0x10 /* Don't check parity */
-
-/* COR2 bits for both RTA and driver use */
-#define RIOC_COR2_IXANY 0x80 /* IXANY - any character is XON */
-#define RIOC_COR2_IXON 0x40 /* IXON - enable tx soft flowcontrol */
-#define RIOC_COR2_RTSFLOW 0x02 /* Enable tx hardware flow control */
-
-/* Additional driver bits */
-#define RIOC_COR2_HUPCL 0x20 /* Hang up on close */
-#define RIOC_COR2_CTSFLOW 0x04 /* Enable rx hardware flow control */
-#define RIOC_COR2_IXOFF 0x01 /* Enable rx software flow control */
-#define RIOC_COR2_DTRFLOW 0x08 /* Enable tx hardware flow control */
-
-/* RTA use only */
-#define RIOC_COR2_ETC 0x20 /* Embedded transmit options */
-#define RIOC_COR2_LOCAL 0x10 /* Local loopback mode */
-#define RIOC_COR2_REMOTE 0x08 /* Remote loopback mode */
-#define RIOC_COR2_HOST 0xc2 /* Safe host bits */
-
-/* COR3 - RTA use only */
-#define RIOC_COR3_SCDRNG 0x80 /* Enable special char detect for range */
-#define RIOC_COR3_SCD34 0x40 /* Special character detect for SCHR's 3 + 4 */
-#define RIOC_COR3_FCT 0x20 /* Flow control transparency */
-#define RIOC_COR3_SCD12 0x10 /* Special character detect for SCHR's 1 + 2 */
-#define RIOC_COR3_FIFO12 0x0c /* 12 chars for receive FIFO threshold */
-#define RIOC_COR3_FIFO10 0x0a /* 10 chars for receive FIFO threshold */
-#define RIOC_COR3_FIFO8 0x08 /* 8 chars for receive FIFO threshold */
-#define RIOC_COR3_FIFO6 0x06 /* 6 chars for receive FIFO threshold */
-
-#define RIOC_COR3_THRESHOLD RIOC_COR3_FIFO8 /* MUST BE LESS THAN MCOR_THRESHOLD */
-
-#define RIOC_COR3_DEFAULT (RIOC_COR3_FCT | RIOC_COR3_THRESHOLD)
- /* Default bits for COR3 */
-
-/* COR4 driver and RTA use */
-#define RIOC_COR4_IGNCR 0x80 /* Throw away CR's on input */
-#define RIOC_COR4_ICRNL 0x40 /* Map CR -> NL on input */
-#define RIOC_COR4_INLCR 0x20 /* Map NL -> CR on input */
-#define RIOC_COR4_IGNBRK 0x10 /* Ignore Break */
-#define RIOC_COR4_NBRKINT 0x08 /* No interrupt on break (-BRKINT) */
-#define RIOC_COR4_RAISEMOD 0x01 /* Raise modem output lines on non-zero baud */
-
-
-/* COR4 driver only */
-#define RIOC_COR4_IGNPAR 0x04 /* IGNPAR (ignore characters with errors) */
-#define RIOC_COR4_PARMRK 0x02 /* PARMRK */
-
-#define RIOC_COR4_HOST 0xf8 /* Safe host bits */
-
-/* COR4 RTA only */
-#define RIOC_COR4_CIGNPAR 0x02 /* Thrown away bad characters */
-#define RIOC_COR4_CPARMRK 0x04 /* PARMRK characters */
-#define RIOC_COR4_CNPARMRK 0x03 /* Don't PARMRK */
-
-/* COR5 driver and RTA use */
-#define RIOC_COR5_ISTRIP 0x80 /* Strip input chars to 7 bits */
-#define RIOC_COR5_LNE 0x40 /* Enable LNEXT processing */
-#define RIOC_COR5_CMOE 0x20 /* Match good and errored characters */
-#define RIOC_COR5_ONLCR 0x02 /* NL -> CR NL on output */
-#define RIOC_COR5_OCRNL 0x01 /* CR -> NL on output */
-
-/*
-** Spare bits - these are not used in the CIRRUS registers, so we use
-** them to set various other features.
-*/
-/*
-** tstop and tbusy indication
-*/
-#define RIOC_COR5_TSTATE_ON 0x08 /* Turn on monitoring of tbusy and tstop */
-#define RIOC_COR5_TSTATE_OFF 0x04 /* Turn off monitoring of tbusy and tstop */
-/*
-** TAB3
-*/
-#define RIOC_COR5_TAB3 0x10 /* TAB3 mode */
-
-#define RIOC_COR5_HOST 0xc3 /* Safe host bits */
-
-/* CCSR */
-#define RIOC_CCSR_TXFLOFF 0x04 /* Tx is xoffed */
-
-/* MSVR1 */
-/* NB. DTR / CD swapped from Cirrus spec as the pins are also reversed on the
- RTA. This is because otherwise DCD would get lost on the 1 parallel / 3
- serial option.
-*/
-#define RIOC_MSVR1_CD 0x80 /* CD (DSR on Cirrus) */
-#define RIOC_MSVR1_RTS 0x40 /* RTS (CTS on Cirrus) */
-#define RIOC_MSVR1_RI 0x20 /* RI */
-#define RIOC_MSVR1_DTR 0x10 /* DTR (CD on Cirrus) */
-#define RIOC_MSVR1_CTS 0x01 /* CTS output pin (RTS on Cirrus) */
-/* Next two used to indicate state of tbusy and tstop to driver */
-#define RIOC_MSVR1_TSTOP 0x08 /* Set if port flow controlled */
-#define RIOC_MSVR1_TEMPTY 0x04 /* Set if port tx buffer empty */
-
-#define RIOC_MSVR1_HOST 0xf3 /* The bits the host wants */
-
-/* Defines for the subscripts of a CONFIG packet */
-#define RIOC_CONFIG_COR1 1 /* Option register 1 */
-#define RIOC_CONFIG_COR2 2 /* Option register 2 */
-#define RIOC_CONFIG_COR4 3 /* Option register 4 */
-#define RIOC_CONFIG_COR5 4 /* Option register 5 */
-#define RIOC_CONFIG_TXXON 5 /* Tx XON character */
-#define RIOC_CONFIG_TXXOFF 6 /* Tx XOFF character */
-#define RIOC_CONFIG_RXXON 7 /* Rx XON character */
-#define RIOC_CONFIG_RXXOFF 8 /* Rx XOFF character */
-#define RIOC_CONFIG_LNEXT 9 /* LNEXT character */
-#define RIOC_CONFIG_TXBAUD 10 /* Tx baud rate */
-#define RIOC_CONFIG_RXBAUD 11 /* Rx baud rate */
-
-#define RIOC_PRE_EMPTIVE 0x80 /* Pre-emptive bit in command field */
-
-/* Packet types going from Host to remote - with the exception of OPEN, MOPEN,
- CONFIG, SBREAK and MEMDUMP the remaining bytes of the data array will not
- be used
-*/
-#define RIOC_OPEN 0x00 /* Open a port */
-#define RIOC_CONFIG 0x01 /* Configure a port */
-#define RIOC_MOPEN 0x02 /* Modem open (block for DCD) */
-#define RIOC_CLOSE 0x03 /* Close a port */
-#define RIOC_WFLUSH (0x04 | RIOC_PRE_EMPTIVE) /* Write flush */
-#define RIOC_RFLUSH (0x05 | RIOC_PRE_EMPTIVE) /* Read flush */
-#define RIOC_RESUME (0x06 | RIOC_PRE_EMPTIVE) /* Resume if xoffed */
-#define RIOC_SBREAK 0x07 /* Start break */
-#define RIOC_EBREAK 0x08 /* End break */
-#define RIOC_SUSPEND (0x09 | RIOC_PRE_EMPTIVE) /* Susp op (behave as tho xoffed) */
-#define RIOC_FCLOSE (0x0a | RIOC_PRE_EMPTIVE) /* Force close */
-#define RIOC_XPRINT 0x0b /* Xprint packet */
-#define RIOC_MBIS (0x0c | RIOC_PRE_EMPTIVE) /* Set modem lines */
-#define RIOC_MBIC (0x0d | RIOC_PRE_EMPTIVE) /* Clear modem lines */
-#define RIOC_MSET (0x0e | RIOC_PRE_EMPTIVE) /* Set modem lines */
-#define RIOC_PCLOSE 0x0f /* Pseudo close - Leaves rx/tx enabled */
-#define RIOC_MGET (0x10 | RIOC_PRE_EMPTIVE) /* Force update of modem status */
-#define RIOC_MEMDUMP (0x11 | RIOC_PRE_EMPTIVE) /* Send back mem from addr supplied */
-#define RIOC_READ_REGISTER (0x12 | RIOC_PRE_EMPTIVE) /* Read CD1400 register (debug) */
-
-/* "Command" packets going from remote to host COMPLETE and MODEM_STATUS
- use data[4] / data[3] to indicate current state and modem status respectively
-*/
-
-#define RIOC_COMPLETE (0x20 | RIOC_PRE_EMPTIVE)
- /* Command complete */
-#define RIOC_BREAK_RECEIVED (0x21 | RIOC_PRE_EMPTIVE)
- /* Break received */
-#define RIOC_MODEM_STATUS (0x22 | RIOC_PRE_EMPTIVE)
- /* Change in modem status */
-
-/* "Command" packet that could go either way - handshake wake-up */
-#define RIOC_HANDSHAKE (0x23 | RIOC_PRE_EMPTIVE)
- /* Wake-up to HOST / RTA */
-
-#endif
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : cmdblk.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:09
-** Retrieved : 11/6/98 11:34:20
-**
-** ident @(#)cmdblk.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_cmdblk_h__
-#define __rio_cmdblk_h__
-
-/*
-** the structure of a command block, used to queue commands destined for
-** a rup.
-*/
-
-struct CmdBlk {
- struct CmdBlk *NextP; /* Pointer to next command block */
- struct PKT Packet; /* A packet, to copy to the rup */
- /* The func to call to check if OK */
- int (*PreFuncP) (unsigned long, struct CmdBlk *);
- int PreArg; /* The arg for the func */
- /* The func to call when completed */
- int (*PostFuncP) (unsigned long, struct CmdBlk *);
- int PostArg; /* The arg for the func */
-};
-
-#define NUM_RIO_CMD_BLKS (3 * (MAX_RUP * 4 + LINKS_PER_UNIT * 4))
-#endif
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : cmdpkt.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:09
-** Retrieved : 11/6/98 11:34:20
-**
-** ident @(#)cmdpkt.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-#ifndef __rio_cmdpkt_h__
-#define __rio_cmdpkt_h__
-
-/*
-** overlays for the data area of a packet. Used in both directions
-** (to build a packet to send, and to interpret a packet that arrives)
-** and is very inconvenient for MIPS, so they appear as two separate
-** structures - those used for modifying/reading packets on the card
-** and those for modifying/reading packets in real memory, which have an _M
-** suffix.
-*/
-
-#define RTA_BOOT_DATA_SIZE (PKT_MAX_DATA_LEN-2)
-
-/*
-** The boot information packet looks like this:
-** This structure overlays a PktCmd->CmdData structure, and so starts
-** at Data[2] in the actual pkt!
-*/
-struct BootSequence {
- u16 NumPackets;
- u16 LoadBase;
- u16 CodeSize;
-};
-
-#define BOOT_SEQUENCE_LEN 8
-
-struct SamTop {
- u8 Unit;
- u8 Link;
-};
-
-struct CmdHdr {
- u8 PcCommand;
- union {
- u8 PcPhbNum;
- u8 PcLinkNum;
- u8 PcIDNum;
- } U0;
-};
-
-
-struct PktCmd {
- union {
- struct {
- struct CmdHdr CmdHdr;
- struct BootSequence PcBootSequence;
- } S1;
- struct {
- u16 PcSequence;
- u8 PcBootData[RTA_BOOT_DATA_SIZE];
- } S2;
- struct {
- u16 __crud__;
- u8 PcUniqNum[4]; /* this is really a uint. */
- u8 PcModuleTypes; /* what modules are fitted */
- } S3;
- struct {
- struct CmdHdr CmdHdr;
- u8 __undefined__;
- u8 PcModemStatus;
- u8 PcPortStatus;
- u8 PcSubCommand; /* commands like mem or register dump */
- u16 PcSubAddr; /* Address for command */
- u8 PcSubData[64]; /* Date area for command */
- } S4;
- struct {
- struct CmdHdr CmdHdr;
- u8 PcCommandText[1];
- u8 __crud__[20];
- u8 PcIDNum2; /* It had to go somewhere! */
- } S5;
- struct {
- struct CmdHdr CmdHdr;
- struct SamTop Topology[LINKS_PER_UNIT];
- } S6;
- } U1;
-};
-
-struct PktCmd_M {
- union {
- struct {
- struct {
- u8 PcCommand;
- union {
- u8 PcPhbNum;
- u8 PcLinkNum;
- u8 PcIDNum;
- } U0;
- } CmdHdr;
- struct {
- u16 NumPackets;
- u16 LoadBase;
- u16 CodeSize;
- } PcBootSequence;
- } S1;
- struct {
- u16 PcSequence;
- u8 PcBootData[RTA_BOOT_DATA_SIZE];
- } S2;
- struct {
- u16 __crud__;
- u8 PcUniqNum[4]; /* this is really a uint. */
- u8 PcModuleTypes; /* what modules are fitted */
- } S3;
- struct {
- u16 __cmd_hdr__;
- u8 __undefined__;
- u8 PcModemStatus;
- u8 PcPortStatus;
- u8 PcSubCommand;
- u16 PcSubAddr;
- u8 PcSubData[64];
- } S4;
- struct {
- u16 __cmd_hdr__;
- u8 PcCommandText[1];
- u8 __crud__[20];
- u8 PcIDNum2; /* Tacked on end */
- } S5;
- struct {
- u16 __cmd_hdr__;
- struct Top Topology[LINKS_PER_UNIT];
- } S6;
- } U1;
-};
-
-#define Command U1.S1.CmdHdr.PcCommand
-#define PhbNum U1.S1.CmdHdr.U0.PcPhbNum
-#define IDNum U1.S1.CmdHdr.U0.PcIDNum
-#define IDNum2 U1.S5.PcIDNum2
-#define LinkNum U1.S1.CmdHdr.U0.PcLinkNum
-#define Sequence U1.S2.PcSequence
-#define BootData U1.S2.PcBootData
-#define BootSequence U1.S1.PcBootSequence
-#define UniqNum U1.S3.PcUniqNum
-#define ModemStatus U1.S4.PcModemStatus
-#define PortStatus U1.S4.PcPortStatus
-#define SubCommand U1.S4.PcSubCommand
-#define SubAddr U1.S4.PcSubAddr
-#define SubData U1.S4.PcSubData
-#define CommandText U1.S5.PcCommandText
-#define RouteTopology U1.S6.Topology
-#define ModuleTypes U1.S3.PcModuleTypes
-
-#endif
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : daemon.h
-** SID : 1.3
-** Last Modified : 11/6/98 11:34:09
-** Retrieved : 11/6/98 11:34:21
-**
-** ident @(#)daemon.h 1.3
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_daemon_h__
-#define __rio_daemon_h__
-
-
-/*
-** structures used on /dev/rio
-*/
-
-struct Error {
- unsigned int Error;
- unsigned int Entry;
- unsigned int Other;
-};
-
-struct DownLoad {
- char __user *DataP;
- unsigned int Count;
- unsigned int ProductCode;
-};
-
-/*
-** A few constants....
-*/
-#ifndef MAX_VERSION_LEN
-#define MAX_VERSION_LEN 256
-#endif
-
-#ifndef MAX_XP_CTRL_LEN
-#define MAX_XP_CTRL_LEN 16 /* ALSO IN PORT.H */
-#endif
-
-struct PortSetup {
- unsigned int From; /* Set/Clear XP & IXANY Control from this port.... */
- unsigned int To; /* .... to this port */
- unsigned int XpCps; /* at this speed */
- char XpOn[MAX_XP_CTRL_LEN]; /* this is the start string */
- char XpOff[MAX_XP_CTRL_LEN]; /* this is the stop string */
- u8 IxAny; /* enable/disable IXANY */
- u8 IxOn; /* enable/disable IXON */
- u8 Lock; /* lock port params */
- u8 Store; /* store params across closes */
- u8 Drain; /* close only when drained */
-};
-
-struct LpbReq {
- unsigned int Host;
- unsigned int Link;
- struct LPB __user *LpbP;
-};
-
-struct RupReq {
- unsigned int HostNum;
- unsigned int RupNum;
- struct RUP __user *RupP;
-};
-
-struct PortReq {
- unsigned int SysPort;
- struct Port __user *PortP;
-};
-
-struct StreamInfo {
- unsigned int SysPort;
- int RQueue;
- int WQueue;
-};
-
-struct HostReq {
- unsigned int HostNum;
- struct Host __user *HostP;
-};
-
-struct HostDpRam {
- unsigned int HostNum;
- struct DpRam __user *DpRamP;
-};
-
-struct DebugCtrl {
- unsigned int SysPort;
- unsigned int Debug;
- unsigned int Wait;
-};
-
-struct MapInfo {
- unsigned int FirstPort; /* 8 ports, starting from this (tty) number */
- unsigned int RtaUnique; /* reside on this RTA (unique number) */
-};
-
-struct MapIn {
- unsigned int NumEntries; /* How many port sets are we mapping? */
- struct MapInfo *MapInfoP; /* Pointer to (user space) info */
-};
-
-struct SendPack {
- unsigned int PortNum;
- unsigned char Len;
- unsigned char Data[PKT_MAX_DATA_LEN];
-};
-
-struct SpecialRupCmd {
- struct PKT Packet;
- unsigned short Host;
- unsigned short RupNum;
-};
-
-struct IdentifyRta {
- unsigned long RtaUnique;
- u8 ID;
-};
-
-struct KillNeighbour {
- unsigned long UniqueNum;
- u8 Link;
-};
-
-struct rioVersion {
- char version[MAX_VERSION_LEN];
- char relid[MAX_VERSION_LEN];
- int buildLevel;
- char buildDate[MAX_VERSION_LEN];
-};
-
-
-/*
-** RIOC commands are for the daemon type operations
-**
-** 09.12.1998 ARG - ESIL 0776 part fix
-** Definition for 'RIOC' also appears in rioioctl.h, so we'd better do a
-** #ifndef here first.
-** rioioctl.h also now has #define 'RIO_QUICK_CHECK' as this ioctl is now
-** allowed to be used by customers.
-*/
-#ifndef RIOC
-#define RIOC ('R'<<8)|('i'<<16)|('o'<<24)
-#endif
-
-/*
-** Boot stuff
-*/
-#define RIO_GET_TABLE (RIOC | 100)
-#define RIO_PUT_TABLE (RIOC | 101)
-#define RIO_ASSIGN_RTA (RIOC | 102)
-#define RIO_DELETE_RTA (RIOC | 103)
-#define RIO_HOST_FOAD (RIOC | 104)
-#define RIO_QUICK_CHECK (RIOC | 105)
-#define RIO_SIGNALS_ON (RIOC | 106)
-#define RIO_SIGNALS_OFF (RIOC | 107)
-#define RIO_CHANGE_NAME (RIOC | 108)
-#define RIO_DOWNLOAD (RIOC | 109)
-#define RIO_GET_LOG (RIOC | 110)
-#define RIO_SETUP_PORTS (RIOC | 111)
-#define RIO_ALL_MODEM (RIOC | 112)
-
-/*
-** card state, debug stuff
-*/
-#define RIO_NUM_HOSTS (RIOC | 120)
-#define RIO_HOST_LPB (RIOC | 121)
-#define RIO_HOST_RUP (RIOC | 122)
-#define RIO_HOST_PORT (RIOC | 123)
-#define RIO_PARMS (RIOC | 124)
-#define RIO_HOST_REQ (RIOC | 125)
-#define RIO_READ_CONFIG (RIOC | 126)
-#define RIO_SET_CONFIG (RIOC | 127)
-#define RIO_VERSID (RIOC | 128)
-#define RIO_FLAGS (RIOC | 129)
-#define RIO_SETDEBUG (RIOC | 130)
-#define RIO_GETDEBUG (RIOC | 131)
-#define RIO_READ_LEVELS (RIOC | 132)
-#define RIO_SET_FAST_BUS (RIOC | 133)
-#define RIO_SET_SLOW_BUS (RIOC | 134)
-#define RIO_SET_BYTE_MODE (RIOC | 135)
-#define RIO_SET_WORD_MODE (RIOC | 136)
-#define RIO_STREAM_INFO (RIOC | 137)
-#define RIO_START_POLLER (RIOC | 138)
-#define RIO_STOP_POLLER (RIOC | 139)
-#define RIO_LAST_ERROR (RIOC | 140)
-#define RIO_TICK (RIOC | 141)
-#define RIO_TOCK (RIOC | 241) /* I did this on purpose, you know. */
-#define RIO_SEND_PACKET (RIOC | 142)
-#define RIO_SET_BUSY (RIOC | 143)
-#define SPECIAL_RUP_CMD (RIOC | 144)
-#define RIO_FOAD_RTA (RIOC | 145)
-#define RIO_ZOMBIE_RTA (RIOC | 146)
-#define RIO_IDENTIFY_RTA (RIOC | 147)
-#define RIO_KILL_NEIGHBOUR (RIOC | 148)
-#define RIO_DEBUG_MEM (RIOC | 149)
-/*
-** 150 - 167 used..... See below
-*/
-#define RIO_GET_PORT_SETUP (RIOC | 168)
-#define RIO_RESUME (RIOC | 169)
-#define RIO_MESG (RIOC | 170)
-#define RIO_NO_MESG (RIOC | 171)
-#define RIO_WHAT_MESG (RIOC | 172)
-#define RIO_HOST_DPRAM (RIOC | 173)
-#define RIO_MAP_B50_TO_50 (RIOC | 174)
-#define RIO_MAP_B50_TO_57600 (RIOC | 175)
-#define RIO_MAP_B110_TO_110 (RIOC | 176)
-#define RIO_MAP_B110_TO_115200 (RIOC | 177)
-#define RIO_GET_PORT_PARAMS (RIOC | 178)
-#define RIO_SET_PORT_PARAMS (RIOC | 179)
-#define RIO_GET_PORT_TTY (RIOC | 180)
-#define RIO_SET_PORT_TTY (RIOC | 181)
-#define RIO_SYSLOG_ONLY (RIOC | 182)
-#define RIO_SYSLOG_CONS (RIOC | 183)
-#define RIO_CONS_ONLY (RIOC | 184)
-#define RIO_BLOCK_OPENS (RIOC | 185)
-
-/*
-** 02.03.1999 ARG - ESIL 0820 fix :
-** RIOBootMode is no longer use by the driver, so these ioctls
-** are now obsolete :
-**
-#define RIO_GET_BOOT_MODE (RIOC | 186)
-#define RIO_SET_BOOT_MODE (RIOC | 187)
-**
-*/
-
-#define RIO_MEM_DUMP (RIOC | 189)
-#define RIO_READ_REGISTER (RIOC | 190)
-#define RIO_GET_MODTYPE (RIOC | 191)
-#define RIO_SET_TIMER (RIOC | 192)
-#define RIO_READ_CHECK (RIOC | 196)
-#define RIO_WAITING_FOR_RESTART (RIOC | 197)
-#define RIO_BIND_RTA (RIOC | 198)
-#define RIO_GET_BINDINGS (RIOC | 199)
-#define RIO_PUT_BINDINGS (RIOC | 200)
-
-#define RIO_MAKE_DEV (RIOC | 201)
-#define RIO_MINOR (RIOC | 202)
-
-#define RIO_IDENTIFY_DRIVER (RIOC | 203)
-#define RIO_DISPLAY_HOST_CFG (RIOC | 204)
-
-
-/*
-** MAKE_DEV / MINOR stuff
-*/
-#define RIO_DEV_DIRECT 0x0000
-#define RIO_DEV_MODEM 0x0200
-#define RIO_DEV_XPRINT 0x0400
-#define RIO_DEV_MASK 0x0600
-
-/*
-** port management, xprint stuff
-*/
-#define rIOCN(N) (RIOC|(N))
-#define rIOCR(N,T) (RIOC|(N))
-#define rIOCW(N,T) (RIOC|(N))
-
-#define RIO_GET_XP_ON rIOCR(150,char[16]) /* start xprint string */
-#define RIO_SET_XP_ON rIOCW(151,char[16])
-#define RIO_GET_XP_OFF rIOCR(152,char[16]) /* finish xprint string */
-#define RIO_SET_XP_OFF rIOCW(153,char[16])
-#define RIO_GET_XP_CPS rIOCR(154,int) /* xprint CPS */
-#define RIO_SET_XP_CPS rIOCW(155,int)
-#define RIO_GET_IXANY rIOCR(156,int) /* ixany allowed? */
-#define RIO_SET_IXANY rIOCW(157,int)
-#define RIO_SET_IXANY_ON rIOCN(158) /* allow ixany */
-#define RIO_SET_IXANY_OFF rIOCN(159) /* disallow ixany */
-#define RIO_GET_MODEM rIOCR(160,int) /* port is modem/direct line? */
-#define RIO_SET_MODEM rIOCW(161,int)
-#define RIO_SET_MODEM_ON rIOCN(162) /* port is a modem */
-#define RIO_SET_MODEM_OFF rIOCN(163) /* port is direct */
-#define RIO_GET_IXON rIOCR(164,int) /* ixon allowed? */
-#define RIO_SET_IXON rIOCW(165,int)
-#define RIO_SET_IXON_ON rIOCN(166) /* allow ixon */
-#define RIO_SET_IXON_OFF rIOCN(167) /* disallow ixon */
-
-#define RIO_GET_SIVIEW ((('s')<<8) | 106) /* backwards compatible with SI */
-
-#define RIO_IOCTL_UNKNOWN -2
-
-#endif
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : errors.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:10
-** Retrieved : 11/6/98 11:34:21
-**
-** ident @(#)errors.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_errors_h__
-#define __rio_errors_h__
-
-/*
-** error codes
-*/
-
-#define NOTHING_WRONG_AT_ALL 0
-#define BAD_CHARACTER_IN_NAME 1
-#define TABLE_ENTRY_ISNT_PROPERLY_NULL 2
-#define UNKNOWN_HOST_NUMBER 3
-#define ZERO_RTA_ID 4
-#define BAD_RTA_ID 5
-#define DUPLICATED_RTA_ID 6
-#define DUPLICATE_UNIQUE_NUMBER 7
-#define BAD_TTY_NUMBER 8
-#define TTY_NUMBER_IN_USE 9
-#define NAME_USED_TWICE 10
-#define HOST_ID_NOT_ZERO 11
-#define BOOT_IN_PROGRESS 12
-#define COPYIN_FAILED 13
-#define HOST_FILE_TOO_LARGE 14
-#define COPYOUT_FAILED 15
-#define NOT_SUPER_USER 16
-#define RIO_ALREADY_POLLING 17
-
-#define ID_NUMBER_OUT_OF_RANGE 18
-#define PORT_NUMBER_OUT_OF_RANGE 19
-#define HOST_NUMBER_OUT_OF_RANGE 20
-#define RUP_NUMBER_OUT_OF_RANGE 21
-#define TTY_NUMBER_OUT_OF_RANGE 22
-#define LINK_NUMBER_OUT_OF_RANGE 23
-
-#define HOST_NOT_RUNNING 24
-#define IOCTL_COMMAND_UNKNOWN 25
-#define RIO_SYSTEM_HALTED 26
-#define WAIT_FOR_DRAIN_BROKEN 27
-#define PORT_NOT_MAPPED_INTO_SYSTEM 28
-#define EXCLUSIVE_USE_SET 29
-#define WAIT_FOR_NOT_CLOSING_BROKEN 30
-#define WAIT_FOR_PORT_TO_OPEN_BROKEN 31
-#define WAIT_FOR_CARRIER_BROKEN 32
-#define WAIT_FOR_NOT_IN_USE_BROKEN 33
-#define WAIT_FOR_CAN_ADD_COMMAND_BROKEN 34
-#define WAIT_FOR_ADD_COMMAND_BROKEN 35
-#define WAIT_FOR_NOT_PARAM_BROKEN 36
-#define WAIT_FOR_RETRY_BROKEN 37
-#define HOST_HAS_ALREADY_BEEN_BOOTED 38
-#define UNIT_IS_IN_USE 39
-#define COULDNT_FIND_ENTRY 40
-#define RTA_UNIQUE_NUMBER_ZERO 41
-#define CLOSE_COMMAND_FAILED 42
-#define WAIT_FOR_CLOSE_BROKEN 43
-#define CPS_VALUE_OUT_OF_RANGE 44
-#define ID_ALREADY_IN_USE 45
-#define SIGNALS_ALREADY_SET 46
-#define NOT_RECEIVING_PROCESS 47
-#define RTA_NUMBER_WRONG 48
-#define NO_SUCH_PRODUCT 49
-#define HOST_SYSPORT_BAD 50
-#define ID_NOT_TENTATIVE 51
-#define XPRINT_CPS_OUT_OF_RANGE 52
-#define NOT_ENOUGH_CORE_FOR_PCI_COPY 53
-
-
-#endif /* __rio_errors_h__ */
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : func.h
-** SID : 1.3
-** Last Modified : 11/6/98 11:34:10
-** Retrieved : 11/6/98 11:34:21
-**
-** ident @(#)func.h 1.3
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __func_h_def
-#define __func_h_def
-
-#include <linux/kdev_t.h>
-
-/* rioboot.c */
-int RIOBootCodeRTA(struct rio_info *, struct DownLoad *);
-int RIOBootCodeHOST(struct rio_info *, struct DownLoad *);
-int RIOBootCodeUNKNOWN(struct rio_info *, struct DownLoad *);
-void msec_timeout(struct Host *);
-int RIOBootRup(struct rio_info *, unsigned int, struct Host *, struct PKT __iomem *);
-int RIOBootOk(struct rio_info *, struct Host *, unsigned long);
-int RIORtaBound(struct rio_info *, unsigned int);
-void rio_fill_host_slot(int, int, unsigned int, struct Host *);
-
-/* riocmd.c */
-int RIOFoadRta(struct Host *, struct Map *);
-int RIOZombieRta(struct Host *, struct Map *);
-int RIOCommandRta(struct rio_info *, unsigned long, int (*func) (struct Host *, struct Map *));
-int RIOIdentifyRta(struct rio_info *, void __user *);
-int RIOKillNeighbour(struct rio_info *, void __user *);
-int RIOSuspendBootRta(struct Host *, int, int);
-int RIOFoadWakeup(struct rio_info *);
-struct CmdBlk *RIOGetCmdBlk(void);
-void RIOFreeCmdBlk(struct CmdBlk *);
-int RIOQueueCmdBlk(struct Host *, unsigned int, struct CmdBlk *);
-void RIOPollHostCommands(struct rio_info *, struct Host *);
-int RIOWFlushMark(unsigned long, struct CmdBlk *);
-int RIORFlushEnable(unsigned long, struct CmdBlk *);
-int RIOUnUse(unsigned long, struct CmdBlk *);
-
-/* rioctrl.c */
-int riocontrol(struct rio_info *, dev_t, int, unsigned long, int);
-
-int RIOPreemptiveCmd(struct rio_info *, struct Port *, unsigned char);
-
-/* rioinit.c */
-void rioinit(struct rio_info *, struct RioHostInfo *);
-void RIOInitHosts(struct rio_info *, struct RioHostInfo *);
-void RIOISAinit(struct rio_info *, int);
-int RIODoAT(struct rio_info *, int, int);
-caddr_t RIOCheckForATCard(int);
-int RIOAssignAT(struct rio_info *, int, void __iomem *, int);
-int RIOBoardTest(unsigned long, void __iomem *, unsigned char, int);
-void RIOAllocDataStructs(struct rio_info *);
-void RIOSetupDataStructs(struct rio_info *);
-int RIODefaultName(struct rio_info *, struct Host *, unsigned int);
-struct rioVersion *RIOVersid(void);
-void RIOHostReset(unsigned int, struct DpRam __iomem *, unsigned int);
-
-/* riointr.c */
-void RIOTxEnable(char *);
-void RIOServiceHost(struct rio_info *, struct Host *);
-int riotproc(struct rio_info *, struct ttystatics *, int, int);
-
-/* rioparam.c */
-int RIOParam(struct Port *, int, int, int);
-int RIODelay(struct Port *PortP, int);
-int RIODelay_ni(struct Port *PortP, int);
-void ms_timeout(struct Port *);
-int can_add_transmit(struct PKT __iomem **, struct Port *);
-void add_transmit(struct Port *);
-void put_free_end(struct Host *, struct PKT __iomem *);
-int can_remove_receive(struct PKT __iomem **, struct Port *);
-void remove_receive(struct Port *);
-
-/* rioroute.c */
-int RIORouteRup(struct rio_info *, unsigned int, struct Host *, struct PKT __iomem *);
-void RIOFixPhbs(struct rio_info *, struct Host *, unsigned int);
-unsigned int GetUnitType(unsigned int);
-int RIOSetChange(struct rio_info *);
-int RIOFindFreeID(struct rio_info *, struct Host *, unsigned int *, unsigned int *);
-
-
-/* riotty.c */
-
-int riotopen(struct tty_struct *tty, struct file *filp);
-int riotclose(void *ptr);
-int riotioctl(struct rio_info *, struct tty_struct *, int, caddr_t);
-void ttyseth(struct Port *, struct ttystatics *, struct old_sgttyb *sg);
-
-/* riotable.c */
-int RIONewTable(struct rio_info *);
-int RIOApel(struct rio_info *);
-int RIODeleteRta(struct rio_info *, struct Map *);
-int RIOAssignRta(struct rio_info *, struct Map *);
-int RIOReMapPorts(struct rio_info *, struct Host *, struct Map *);
-int RIOChangeName(struct rio_info *, struct Map *);
-
-#if 0
-/* riodrvr.c */
-struct rio_info *rio_install(struct RioHostInfo *);
-int rio_uninstall(struct rio_info *);
-int rio_open(struct rio_info *, int, struct file *);
-int rio_close(struct rio_info *, struct file *);
-int rio_read(struct rio_info *, struct file *, char *, int);
-int rio_write(struct rio_info *, struct file *f, char *, int);
-int rio_ioctl(struct rio_info *, struct file *, int, char *);
-int rio_select(struct rio_info *, struct file *f, int, struct sel *);
-int rio_intr(char *);
-int rio_isr_thread(char *);
-struct rio_info *rio_info_store(int cmd, struct rio_info *p);
-#endif
-
-extern void rio_copy_to_card(void *from, void __iomem *to, int len);
-extern int rio_minor(struct tty_struct *tty);
-extern int rio_ismodem(struct tty_struct *tty);
-
-extern void rio_start_card_running(struct Host *HostP);
-
-#endif /* __func_h_def */
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : host.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:10
-** Retrieved : 11/6/98 11:34:21
-**
-** ident @(#)host.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_host_h__
-#define __rio_host_h__
-
-/*
-** the host structure - one per host card in the system.
-*/
-
-#define MAX_EXTRA_UNITS 64
-
-/*
-** Host data structure. This is used for the software equiv. of
-** the host.
-*/
-struct Host {
- struct pci_dev *pdev;
- unsigned char Type; /* RIO_EISA, RIO_MCA, ... */
- unsigned char Ivec; /* POLLED or ivec number */
- unsigned char Mode; /* Control stuff */
- unsigned char Slot; /* Slot */
- void __iomem *Caddr; /* KV address of DPRAM */
- struct DpRam __iomem *CardP; /* KV address of DPRAM, with overlay */
- unsigned long PaddrP; /* Phys. address of DPRAM */
- char Name[MAX_NAME_LEN]; /* The name of the host */
- unsigned int UniqueNum; /* host unique number */
- spinlock_t HostLock; /* Lock structure for MPX */
- unsigned int WorkToBeDone; /* set to true each interrupt */
- unsigned int InIntr; /* Being serviced? */
- unsigned int IntSrvDone; /* host's interrupt has been serviced */
- void (*Copy) (void *, void __iomem *, int); /* copy func */
- struct timer_list timer;
- /*
- ** I M P O R T A N T !
- **
- ** The rest of this data structure is cleared to zero after
- ** a RIO_HOST_FOAD command.
- */
-
- unsigned long Flags; /* Whats going down */
-#define RC_WAITING 0
-#define RC_STARTUP 1
-#define RC_RUNNING 2
-#define RC_STUFFED 3
-#define RC_READY 7
-#define RUN_STATE 7
-/*
-** Boot mode applies to the way in which hosts in this system will
-** boot RTAs
-*/
-#define RC_BOOT_ALL 0x8 /* Boot all RTAs attached */
-#define RC_BOOT_OWN 0x10 /* Only boot RTAs bound to this system */
-#define RC_BOOT_NONE 0x20 /* Don't boot any RTAs (slave mode) */
-
- struct Top Topology[LINKS_PER_UNIT]; /* one per link */
- struct Map Mapping[MAX_RUP]; /* Mappings for host */
- struct PHB __iomem *PhbP; /* Pointer to the PHB array */
- unsigned short __iomem *PhbNumP; /* Ptr to Number of PHB's */
- struct LPB __iomem *LinkStrP; /* Link Structure Array */
- struct RUP __iomem *RupP; /* Sixteen real rups here */
- struct PARM_MAP __iomem *ParmMapP; /* points to the parmmap */
- unsigned int ExtraUnits[MAX_EXTRA_UNITS]; /* unknown things */
- unsigned int NumExtraBooted; /* how many of the above */
- /*
- ** Twenty logical rups.
- ** The first sixteen are the real Rup entries (above), the last four
- ** are the link RUPs.
- */
- struct UnixRup UnixRups[MAX_RUP + LINKS_PER_UNIT];
- int timeout_id; /* For calling 100 ms delays */
- int timeout_sem; /* For calling 100 ms delays */
- unsigned long locks; /* long req'd for set_bit --RR */
- char ____end_marker____;
-};
-#define Control CardP->DpControl
-#define SetInt CardP->DpSetInt
-#define ResetTpu CardP->DpResetTpu
-#define ResetInt CardP->DpResetInt
-#define Signature CardP->DpSignature
-#define Sram1 CardP->DpSram1
-#define Sram2 CardP->DpSram2
-#define Sram3 CardP->DpSram3
-#define Scratch CardP->DpScratch
-#define __ParmMapR CardP->DpParmMapR
-#define SLX CardP->DpSlx
-#define Revision CardP->DpRevision
-#define Unique CardP->DpUnique
-#define Year CardP->DpYear
-#define Week CardP->DpWeek
-
-#define RIO_DUMBPARM 0x0860 /* what not to expect */
-
-#endif
+++ /dev/null
-/****************************************************************************
- ******* *******
- ******* L I N K
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra / Jeremy Rolls
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef _link_h
-#define _link_h 1
-
-/*************************************************
- * Define the Link Status stuff
- ************************************************/
-/* Boot request stuff */
-#define BOOT_REQUEST ((ushort) 0) /* Request for a boot */
-#define BOOT_ABORT ((ushort) 1) /* Abort a boot */
-#define BOOT_SEQUENCE ((ushort) 2) /* Packet with the number of packets
- and load address */
-#define BOOT_COMPLETED ((ushort) 3) /* Boot completed */
-
-
-struct LPB {
- u16 link_number; /* Link Number */
- u16 in_ch; /* Link In Channel */
- u16 out_ch; /* Link Out Channel */
- u8 attached_serial[4]; /* Attached serial number */
- u8 attached_host_serial[4];
- /* Serial number of Host who
- booted the other end */
- u16 descheduled; /* Currently Descheduled */
- u16 state; /* Current state */
- u16 send_poll; /* Send a Poll Packet */
- u16 ltt_p; /* Process Descriptor */
- u16 lrt_p; /* Process Descriptor */
- u16 lrt_status; /* Current lrt status */
- u16 ltt_status; /* Current ltt status */
- u16 timeout; /* Timeout value */
- u16 topology; /* Topology bits */
- u16 mon_ltt;
- u16 mon_lrt;
- u16 WaitNoBoot; /* Secs to hold off booting */
- u16 add_packet_list; /* Add packets to here */
- u16 remove_packet_list; /* Send packets from here */
-
- u16 lrt_fail_chan; /* Lrt's failure channel */
- u16 ltt_fail_chan; /* Ltt's failure channel */
-
- /* RUP structure for HOST to driver communications */
- struct RUP rup;
- struct RUP link_rup; /* RUP for the link (POLL,
- topology etc.) */
- u16 attached_link; /* Number of attached link */
- u16 csum_errors; /* csum errors */
- u16 num_disconnects; /* number of disconnects */
- u16 num_sync_rcvd; /* # sync's received */
- u16 num_sync_rqst; /* # sync requests */
- u16 num_tx; /* Num pkts sent */
- u16 num_rx; /* Num pkts received */
- u16 module_attached; /* Module tpyes of attached */
- u16 led_timeout; /* LED timeout */
- u16 first_port; /* First port to service */
- u16 last_port; /* Last port to service */
-};
-
-#endif
-
-/*********** end of file ***********/
+++ /dev/null
-/*
- * (C) 2000 R.E.Wolff@BitWizard.nl
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/interrupt.h>
-
-
-#define DEBUG_ALL
-
-struct ttystatics {
- struct termios tm;
-};
-
-extern int rio_debug;
-
-#define RIO_DEBUG_INIT 0x000001
-#define RIO_DEBUG_BOOT 0x000002
-#define RIO_DEBUG_CMD 0x000004
-#define RIO_DEBUG_CTRL 0x000008
-#define RIO_DEBUG_INTR 0x000010
-#define RIO_DEBUG_PARAM 0x000020
-#define RIO_DEBUG_ROUTE 0x000040
-#define RIO_DEBUG_TABLE 0x000080
-#define RIO_DEBUG_TTY 0x000100
-#define RIO_DEBUG_FLOW 0x000200
-#define RIO_DEBUG_MODEMSIGNALS 0x000400
-#define RIO_DEBUG_PROBE 0x000800
-#define RIO_DEBUG_CLEANUP 0x001000
-#define RIO_DEBUG_IFLOW 0x002000
-#define RIO_DEBUG_PFE 0x004000
-#define RIO_DEBUG_REC 0x008000
-#define RIO_DEBUG_SPINLOCK 0x010000
-#define RIO_DEBUG_DELAY 0x020000
-#define RIO_DEBUG_MOD_COUNT 0x040000
-
-
-/* Copied over from riowinif.h . This is ugly. The winif file declares
-also much other stuff which is incompatible with the headers from
-the older driver. The older driver includes "brates.h" which shadows
-the definitions from Linux, and is incompatible... */
-
-/* RxBaud and TxBaud definitions... */
-#define RIO_B0 0x00 /* RTS / DTR signals dropped */
-#define RIO_B50 0x01 /* 50 baud */
-#define RIO_B75 0x02 /* 75 baud */
-#define RIO_B110 0x03 /* 110 baud */
-#define RIO_B134 0x04 /* 134.5 baud */
-#define RIO_B150 0x05 /* 150 baud */
-#define RIO_B200 0x06 /* 200 baud */
-#define RIO_B300 0x07 /* 300 baud */
-#define RIO_B600 0x08 /* 600 baud */
-#define RIO_B1200 0x09 /* 1200 baud */
-#define RIO_B1800 0x0A /* 1800 baud */
-#define RIO_B2400 0x0B /* 2400 baud */
-#define RIO_B4800 0x0C /* 4800 baud */
-#define RIO_B9600 0x0D /* 9600 baud */
-#define RIO_B19200 0x0E /* 19200 baud */
-#define RIO_B38400 0x0F /* 38400 baud */
-#define RIO_B56000 0x10 /* 56000 baud */
-#define RIO_B57600 0x11 /* 57600 baud */
-#define RIO_B64000 0x12 /* 64000 baud */
-#define RIO_B115200 0x13 /* 115200 baud */
-#define RIO_B2000 0x14 /* 2000 baud */
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : map.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:11
-** Retrieved : 11/6/98 11:34:21
-**
-** ident @(#)map.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_map_h__
-#define __rio_map_h__
-
-/*
-** mapping structure passed to and from the config.rio program to
-** determine the current topology of the world
-*/
-
-#define MAX_MAP_ENTRY 17
-#define TOTAL_MAP_ENTRIES (MAX_MAP_ENTRY*RIO_SLOTS)
-#define MAX_NAME_LEN 32
-
-struct Map {
- unsigned int HostUniqueNum; /* Supporting hosts unique number */
- unsigned int RtaUniqueNum; /* Unique number */
- /*
- ** The next two IDs must be swapped on big-endian architectures
- ** when using a v2.04 /etc/rio/config with a v3.00 driver (when
- ** upgrading for example).
- */
- unsigned short ID; /* ID used in the subnet */
- unsigned short ID2; /* ID of 2nd block of 8 for 16 port */
- unsigned long Flags; /* Booted, ID Given, Disconnected */
- unsigned long SysPort; /* First tty mapped to this port */
- struct Top Topology[LINKS_PER_UNIT]; /* ID connected to each link */
- char Name[MAX_NAME_LEN]; /* Cute name by which RTA is known */
-};
-
-/*
-** Flag values:
-*/
-#define RTA_BOOTED 0x00000001
-#define RTA_NEWBOOT 0x00000010
-#define MSG_DONE 0x00000020
-#define RTA_INTERCONNECT 0x00000040
-#define RTA16_SECOND_SLOT 0x00000080
-#define BEEN_HERE 0x00000100
-#define SLOT_TENTATIVE 0x40000000
-#define SLOT_IN_USE 0x80000000
-
-/*
-** HostUniqueNum is the unique number from the host card that this RTA
-** is to be connected to.
-** RtaUniqueNum is the unique number of the RTA concerned. It will be ZERO
-** if the slot in the table is unused. If it is the same as the HostUniqueNum
-** then this slot represents a host card.
-** Flags contains current boot/route state info
-** SysPort is a value in the range 0-504, being the number of the first tty
-** on this RTA. Each RTA supports 8 ports. The SysPort value must be modulo 8.
-** SysPort 0-127 correspond to /dev/ttyr001 to /dev/ttyr128, with minor
-** numbers 0-127. SysPort 128-255 correspond to /dev/ttyr129 to /dev/ttyr256,
-** again with minor numbers 0-127, and so on for SysPorts 256-383 and 384-511
-** ID will be in the range 0-16 for a `known' RTA. ID will be 0xFFFF for an
-** unused slot/unknown ID etc.
-** The Topology array contains the ID of the unit connected to each of the
-** four links on this unit. The entry will be 0xFFFF if NOTHING is connected
-** to the link, or will be 0xFF00 if an UNKNOWN unit is connected to the link.
-** The Name field is a null-terminated string, up to 31 characters, containing
-** the 'cute' name that the sysadmin/users know the RTA by. It is permissible
-** for this string to contain any character in the range \040 to \176 inclusive.
-** In particular, ctrl sequences and DEL (0x7F, \177) are not allowed. The
-** special character '%' IS allowable, and needs no special action.
-**
-*/
-
-#endif
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : param.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:12
-** Retrieved : 11/6/98 11:34:21
-**
-** ident @(#)param.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_param_h__
-#define __rio_param_h__
-
-/*
-** the param command block, as used in OPEN and PARAM calls.
-*/
-
-struct phb_param {
- u8 Cmd; /* It is very important that these line up */
- u8 Cor1; /* with what is expected at the other end. */
- u8 Cor2; /* to confirm that you've got it right, */
- u8 Cor4; /* check with cirrus/cirrus.h */
- u8 Cor5;
- u8 TxXon; /* Transmit X-On character */
- u8 TxXoff; /* Transmit X-Off character */
- u8 RxXon; /* Receive X-On character */
- u8 RxXoff; /* Receive X-Off character */
- u8 LNext; /* Literal-next character */
- u8 TxBaud; /* Transmit baudrate */
- u8 RxBaud; /* Receive baudrate */
-};
-
-#endif
+++ /dev/null
-/****************************************************************************
- ******* *******
- ******* H O S T M E M O R Y M A P
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra / Jeremy Rolls
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-6/4/1991 jonb Made changes to accommodate Mips R3230 bus
- ***************************************************************************/
-
-#ifndef _parmap_h
-#define _parmap_h
-
-typedef struct PARM_MAP PARM_MAP;
-
-struct PARM_MAP {
- u16 phb_ptr; /* Pointer to the PHB array */
- u16 phb_num_ptr; /* Ptr to Number of PHB's */
- u16 free_list; /* Free List pointer */
- u16 free_list_end; /* Free List End pointer */
- u16 q_free_list_ptr; /* Ptr to Q_BUF variable */
- u16 unit_id_ptr; /* Unit Id */
- u16 link_str_ptr; /* Link Structure Array */
- u16 bootloader_1; /* 1st Stage Boot Loader */
- u16 bootloader_2; /* 2nd Stage Boot Loader */
- u16 port_route_map_ptr; /* Port Route Map */
- u16 route_ptr; /* Unit Route Map */
- u16 map_present; /* Route Map present */
- s16 pkt_num; /* Total number of packets */
- s16 q_num; /* Total number of Q packets */
- u16 buffers_per_port; /* Number of buffers per port */
- u16 heap_size; /* Initial size of heap */
- u16 heap_left; /* Current Heap left */
- u16 error; /* Error code */
- u16 tx_max; /* Max number of tx pkts per phb */
- u16 rx_max; /* Max number of rx pkts per phb */
- u16 rx_limit; /* For high / low watermarks */
- s16 links; /* Links to use */
- s16 timer; /* Interrupts per second */
- u16 rups; /* Pointer to the RUPs */
- u16 max_phb; /* Mostly for debugging */
- u16 living; /* Just increments!! */
- u16 init_done; /* Initialisation over */
- u16 booting_link;
- u16 idle_count; /* Idle time counter */
- u16 busy_count; /* Busy counter */
- u16 idle_control; /* Control Idle Process */
- u16 tx_intr; /* TX interrupt pending */
- u16 rx_intr; /* RX interrupt pending */
- u16 rup_intr; /* RUP interrupt pending */
-};
-
-#endif
-
-/*********** end of file ***********/
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : pci.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:12
-** Retrieved : 11/6/98 11:34:21
-**
-** ident @(#)pci.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_pci_h__
-#define __rio_pci_h__
-
-/*
-** PCI stuff
-*/
-
-#define PCITpFastClock 0x80
-#define PCITpSlowClock 0x00
-#define PCITpFastLinks 0x40
-#define PCITpSlowLinks 0x00
-#define PCITpIntEnable 0x04
-#define PCITpIntDisable 0x00
-#define PCITpBusEnable 0x02
-#define PCITpBusDisable 0x00
-#define PCITpBootFromRam 0x01
-#define PCITpBootFromLink 0x00
-
-#define RIO_PCI_VENDOR 0x11CB
-#define RIO_PCI_DEVICE 0x8000
-#define RIO_PCI_BASE_CLASS 0x02
-#define RIO_PCI_SUB_CLASS 0x80
-#define RIO_PCI_PROG_IFACE 0x00
-
-#define RIO_PCI_RID 0x0008
-#define RIO_PCI_BADR0 0x0010
-#define RIO_PCI_INTLN 0x003C
-#define RIO_PCI_INTPIN 0x003D
-
-#define RIO_PCI_MEM_SIZE 65536
-
-#define RIO_PCI_TURBO_TP 0x80
-#define RIO_PCI_FAST_LINKS 0x40
-#define RIO_PCI_INT_ENABLE 0x04
-#define RIO_PCI_TP_BUS_ENABLE 0x02
-#define RIO_PCI_BOOT_FROM_RAM 0x01
-
-#define RIO_PCI_DEFAULT_MODE 0x05
-
-#endif /* __rio_pci_h__ */
+++ /dev/null
-/****************************************************************************
- ******* *******
- ******* P H B H E A D E R *******
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra, Jeremy Rolls
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef _phb_h
-#define _phb_h 1
-
-/*************************************************
- * Handshake asserted. Deasserted by the LTT(s)
- ************************************************/
-#define PHB_HANDSHAKE_SET ((ushort) 0x001) /* Set by LRT */
-
-#define PHB_HANDSHAKE_RESET ((ushort) 0x002) /* Set by ISR / driver */
-
-#define PHB_HANDSHAKE_FLAGS (PHB_HANDSHAKE_RESET | PHB_HANDSHAKE_SET)
- /* Reset by ltt */
-
-
-/*************************************************
- * Maximum number of PHB's
- ************************************************/
-#define MAX_PHB ((ushort) 128) /* range 0-127 */
-
-/*************************************************
- * Defines for the mode fields
- ************************************************/
-#define TXPKT_INCOMPLETE 0x0001 /* Previous tx packet not completed */
-#define TXINTR_ENABLED 0x0002 /* Tx interrupt is enabled */
-#define TX_TAB3 0x0004 /* TAB3 mode */
-#define TX_OCRNL 0x0008 /* OCRNL mode */
-#define TX_ONLCR 0x0010 /* ONLCR mode */
-#define TX_SENDSPACES 0x0020 /* Send n spaces command needs
- completing */
-#define TX_SENDNULL 0x0040 /* Escaping NULL needs completing */
-#define TX_SENDLF 0x0080 /* LF -> CR LF needs completing */
-#define TX_PARALLELBUG 0x0100 /* CD1400 LF -> CR LF bug on parallel
- port */
-#define TX_HANGOVER (TX_SENDSPACES | TX_SENDLF | TX_SENDNULL)
-#define TX_DTRFLOW 0x0200 /* DTR tx flow control */
-#define TX_DTRFLOWED 0x0400 /* DTR is low - don't allow more data
- into the FIFO */
-#define TX_DATAINFIFO 0x0800 /* There is data in the FIFO */
-#define TX_BUSY 0x1000 /* Data in FIFO, shift or holding regs */
-
-#define RX_SPARE 0x0001 /* SPARE */
-#define RXINTR_ENABLED 0x0002 /* Rx interrupt enabled */
-#define RX_ICRNL 0x0008 /* ICRNL mode */
-#define RX_INLCR 0x0010 /* INLCR mode */
-#define RX_IGNCR 0x0020 /* IGNCR mode */
-#define RX_CTSFLOW 0x0040 /* CTSFLOW enabled */
-#define RX_IXOFF 0x0080 /* IXOFF enabled */
-#define RX_CTSFLOWED 0x0100 /* CTSFLOW and CTS dropped */
-#define RX_IXOFFED 0x0200 /* IXOFF and xoff sent */
-#define RX_BUFFERED 0x0400 /* Try and pass on complete packets */
-
-#define PORT_ISOPEN 0x0001 /* Port open? */
-#define PORT_HUPCL 0x0002 /* Hangup on close? */
-#define PORT_MOPENPEND 0x0004 /* Modem open pending */
-#define PORT_ISPARALLEL 0x0008 /* Parallel port */
-#define PORT_BREAK 0x0010 /* Port on break */
-#define PORT_STATUSPEND 0x0020 /* Status packet pending */
-#define PORT_BREAKPEND 0x0040 /* Break packet pending */
-#define PORT_MODEMPEND 0x0080 /* Modem status packet pending */
-#define PORT_PARALLELBUG 0x0100 /* CD1400 LF -> CR LF bug on parallel
- port */
-#define PORT_FULLMODEM 0x0200 /* Full modem signals */
-#define PORT_RJ45 0x0400 /* RJ45 connector - no RI signal */
-#define PORT_RESTRICTED 0x0600 /* Restricted connector - no RI / DTR */
-
-#define PORT_MODEMBITS 0x0600 /* Mask for modem fields */
-
-#define PORT_WCLOSE 0x0800 /* Waiting for close */
-#define PORT_HANDSHAKEFIX 0x1000 /* Port has H/W flow control fix */
-#define PORT_WASPCLOSED 0x2000 /* Port closed with PCLOSE */
-#define DUMPMODE 0x4000 /* Dump RTA mem */
-#define READ_REG 0x8000 /* Read CD1400 register */
-
-
-
-/**************************************************************************
- * PHB Structure
- * A few words.
- *
- * Normally Packets are added to the end of the list and removed from
- * the start. The pointer tx_add points to a SPACE to put a Packet.
- * The pointer tx_remove points to the next Packet to remove
- *************************************************************************/
-
-struct PHB {
- u8 source;
- u8 handshake;
- u8 status;
- u16 timeout; /* Maximum of 1.9 seconds */
- u8 link; /* Send down this link */
- u8 destination;
- u16 tx_start;
- u16 tx_end;
- u16 tx_add;
- u16 tx_remove;
-
- u16 rx_start;
- u16 rx_end;
- u16 rx_add;
- u16 rx_remove;
-
-};
-
-#endif
-
-/*********** end of file ***********/
+++ /dev/null
-/****************************************************************************
- ******* *******
- ******* P A C K E T H E A D E R F I L E
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra / Jeremy Rolls
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef _pkt_h
-#define _pkt_h 1
-
-#define PKT_CMD_BIT ((ushort) 0x080)
-#define PKT_CMD_DATA ((ushort) 0x080)
-
-#define PKT_ACK ((ushort) 0x040)
-
-#define PKT_TGL ((ushort) 0x020)
-
-#define PKT_LEN_MASK ((ushort) 0x07f)
-
-#define DATA_WNDW ((ushort) 0x10)
-#define PKT_TTL_MASK ((ushort) 0x0f)
-
-#define PKT_MAX_DATA_LEN 72
-
-#define PKT_LENGTH sizeof(struct PKT)
-#define SYNC_PKT_LENGTH (PKT_LENGTH + 4)
-
-#define CONTROL_PKT_LEN_MASK PKT_LEN_MASK
-#define CONTROL_PKT_CMD_BIT PKT_CMD_BIT
-#define CONTROL_PKT_ACK (PKT_ACK << 8)
-#define CONTROL_PKT_TGL (PKT_TGL << 8)
-#define CONTROL_PKT_TTL_MASK (PKT_TTL_MASK << 8)
-#define CONTROL_DATA_WNDW (DATA_WNDW << 8)
-
-struct PKT {
- u8 dest_unit; /* Destination Unit Id */
- u8 dest_port; /* Destination POrt */
- u8 src_unit; /* Source Unit Id */
- u8 src_port; /* Source POrt */
- u8 len;
- u8 control;
- u8 data[PKT_MAX_DATA_LEN];
- /* Actual data :-) */
- u16 csum; /* C-SUM */
-};
-#endif
-
-/*********** end of file ***********/
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : port.h
-** SID : 1.3
-** Last Modified : 11/6/98 11:34:12
-** Retrieved : 11/6/98 11:34:21
-**
-** ident @(#)port.h 1.3
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_port_h__
-#define __rio_port_h__
-
-/*
-** Port data structure
-*/
-struct Port {
- struct gs_port gs;
- int PortNum; /* RIO port no., 0-511 */
- struct Host *HostP;
- void __iomem *Caddr;
- unsigned short HostPort; /* Port number on host card */
- unsigned char RupNum; /* Number of RUP for port */
- unsigned char ID2; /* Second ID of RTA for port */
- unsigned long State; /* FLAGS for open & xopen */
-#define RIO_LOPEN 0x00001 /* Local open */
-#define RIO_MOPEN 0x00002 /* Modem open */
-#define RIO_WOPEN 0x00004 /* Waiting for open */
-#define RIO_CLOSING 0x00008 /* The port is being close */
-#define RIO_XPBUSY 0x00010 /* Transparent printer busy */
-#define RIO_BREAKING 0x00020 /* Break in progress */
-#define RIO_DIRECT 0x00040 /* Doing Direct output */
-#define RIO_EXCLUSIVE 0x00080 /* Stream open for exclusive use */
-#define RIO_NDELAY 0x00100 /* Stream is open FNDELAY */
-#define RIO_CARR_ON 0x00200 /* Stream has carrier present */
-#define RIO_XPWANTR 0x00400 /* Stream wanted by Xprint */
-#define RIO_RBLK 0x00800 /* Stream is read-blocked */
-#define RIO_BUSY 0x01000 /* Stream is BUSY for write */
-#define RIO_TIMEOUT 0x02000 /* Stream timeout in progress */
-#define RIO_TXSTOP 0x04000 /* Stream output is stopped */
-#define RIO_WAITFLUSH 0x08000 /* Stream waiting for flush */
-#define RIO_DYNOROD 0x10000 /* Drain failed */
-#define RIO_DELETED 0x20000 /* RTA has been deleted */
-#define RIO_ISSCANCODE 0x40000 /* This line is in scancode mode */
-#define RIO_USING_EUC 0x100000 /* Using extended Unix chars */
-#define RIO_CAN_COOK 0x200000 /* This line can do cooking */
-#define RIO_TRIAD_MODE 0x400000 /* Enable TRIAD special ops. */
-#define RIO_TRIAD_BLOCK 0x800000 /* Next read will block */
-#define RIO_TRIAD_FUNC 0x1000000 /* Seen a function key coming in */
-#define RIO_THROTTLE_RX 0x2000000 /* RX needs to be throttled. */
-
- unsigned long Config; /* FLAGS for NOREAD.... */
-#define RIO_NOREAD 0x0001 /* Are not allowed to read port */
-#define RIO_NOWRITE 0x0002 /* Are not allowed to write port */
-#define RIO_NOXPRINT 0x0004 /* Are not allowed to xprint port */
-#define RIO_NOMASK 0x0007 /* All not allowed things */
-#define RIO_IXANY 0x0008 /* Port is allowed ixany */
-#define RIO_MODEM 0x0010 /* Stream is a modem device */
-#define RIO_IXON 0x0020 /* Port is allowed ixon */
-#define RIO_WAITDRAIN 0x0040 /* Wait for port to completely drain */
-#define RIO_MAP_50_TO_50 0x0080 /* Map 50 baud to 50 baud */
-#define RIO_MAP_110_TO_110 0x0100 /* Map 110 baud to 110 baud */
-
-/*
-** 15.10.1998 ARG - ESIL 0761 prt fix
-** As LynxOS does not appear to support Hardware Flow Control .....
-** Define our own flow control flags in 'Config'.
-*/
-#define RIO_CTSFLOW 0x0200 /* RIO's own CTSFLOW flag */
-#define RIO_RTSFLOW 0x0400 /* RIO's own RTSFLOW flag */
-
-
- struct PHB __iomem *PhbP; /* pointer to PHB for port */
- u16 __iomem *TxAdd; /* Add packets here */
- u16 __iomem *TxStart; /* Start of add array */
- u16 __iomem *TxEnd; /* End of add array */
- u16 __iomem *RxRemove; /* Remove packets here */
- u16 __iomem *RxStart; /* Start of remove array */
- u16 __iomem *RxEnd; /* End of remove array */
- unsigned int RtaUniqueNum; /* Unique number of RTA */
- unsigned short PortState; /* status of port */
- unsigned short ModemState; /* status of modem lines */
- unsigned long ModemLines; /* Modem bits sent to RTA */
- unsigned char CookMode; /* who expands CR/LF? */
- unsigned char ParamSem; /* Prevent write during param */
- unsigned char Mapped; /* if port mapped onto host */
- unsigned char SecondBlock; /* if port belongs to 2nd block
- of 16 port RTA */
- unsigned char InUse; /* how many pre-emptive cmds */
- unsigned char Lock; /* if params locked */
- unsigned char Store; /* if params stored across closes */
- unsigned char FirstOpen; /* TRUE if first time port opened */
- unsigned char FlushCmdBodge; /* if doing a (non)flush */
- unsigned char MagicFlags; /* require intr processing */
-#define MAGIC_FLUSH 0x01 /* mirror of WflushFlag */
-#define MAGIC_REBOOT 0x02 /* RTA re-booted, re-open ports */
-#define MORE_OUTPUT_EYGOR 0x04 /* riotproc failed to empty clists */
- unsigned char WflushFlag; /* 1 How many WFLUSHs active */
-/*
-** Transparent print stuff
-*/
- struct Xprint {
-#ifndef MAX_XP_CTRL_LEN
-#define MAX_XP_CTRL_LEN 16 /* ALSO IN DAEMON.H */
-#endif
- unsigned int XpCps;
- char XpOn[MAX_XP_CTRL_LEN];
- char XpOff[MAX_XP_CTRL_LEN];
- unsigned short XpLen; /* strlen(XpOn)+strlen(XpOff) */
- unsigned char XpActive;
- unsigned char XpLastTickOk; /* TRUE if we can process */
-#define XP_OPEN 00001
-#define XP_RUNABLE 00002
- struct ttystatics *XttyP;
- } Xprint;
- unsigned char RxDataStart;
- unsigned char Cor2Copy; /* copy of COR2 */
- char *Name; /* points to the Rta's name */
- char *TxRingBuffer;
- unsigned short TxBufferIn; /* New data arrives here */
- unsigned short TxBufferOut; /* Intr removes data here */
- unsigned short OldTxBufferOut; /* Indicates if draining */
- int TimeoutId; /* Timeout ID */
- unsigned int Debug;
- unsigned char WaitUntilBooted; /* True if open should block */
- unsigned int statsGather; /* True if gathering stats */
- unsigned long txchars; /* Chars transmitted */
- unsigned long rxchars; /* Chars received */
- unsigned long opens; /* port open count */
- unsigned long closes; /* port close count */
- unsigned long ioctls; /* ioctl count */
- unsigned char LastRxTgl; /* Last state of rx toggle bit */
- spinlock_t portSem; /* Lock using this sem */
- int MonitorTstate; /* Monitoring ? */
- int timeout_id; /* For calling 100 ms delays */
- int timeout_sem; /* For calling 100 ms delays */
- int firstOpen; /* First time open ? */
- char *p; /* save the global struc here .. */
-};
-
-struct ModuleInfo {
- char *Name;
- unsigned int Flags[4]; /* one per port on a module */
-};
-
-/*
-** This struct is required because trying to grab an entire Port structure
-** runs into problems with differing struct sizes between driver and config.
-*/
-struct PortParams {
- unsigned int Port;
- unsigned long Config;
- unsigned long State;
- struct ttystatics *TtyP;
-};
-
-#endif
+++ /dev/null
-/****************************************************************************
- ******* *******
- ******* P R O T O C O L S T A T U S S T R U C T U R E *******
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra / Jeremy Rolls
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef _protsts_h
-#define _protsts_h 1
-
-/*************************************************
- * ACK bit. Last Packet received OK. Set by
- * rxpkt to indicate that the Packet has been
- * received OK and that the LTT must set the ACK
- * bit in the next outward bound Packet
- * and re-set by LTT's after xmit.
- *
- * Gets shoved into rx_status
- ************************************************/
-#define PHB_RX_LAST_PKT_ACKED ((ushort) 0x080)
-
-/*******************************************************
- * The Rx TOGGLE bit.
- * Stuffed into rx_status by RXPKT
- ******************************************************/
-#define PHB_RX_DATA_WNDW ((ushort) 0x040)
-
-/*******************************************************
- * The Rx TOGGLE bit. Matches the setting in PKT.H
- * Stuffed into rx_status
- ******************************************************/
-#define PHB_RX_TGL ((ushort) 0x2000)
-
-
-/*************************************************
- * This bit is set by the LRT to indicate that
- * an ACK (packet) must be returned.
- *
- * Gets shoved into tx_status
- ************************************************/
-#define PHB_TX_SEND_PKT_ACK ((ushort) 0x08)
-
-/*************************************************
- * Set by LTT to indicate that an ACK is required
- *************************************************/
-#define PHB_TX_ACK_RQRD ((ushort) 0x01)
-
-
-/*******************************************************
- * The Tx TOGGLE bit.
- * Stuffed into tx_status by RXPKT from the PKT WndW
- * field. Looked by the LTT when the NEXT Packet
- * is going to be sent.
- ******************************************************/
-#define PHB_TX_DATA_WNDW ((ushort) 0x04)
-
-
-/*******************************************************
- * The Tx TOGGLE bit. Matches the setting in PKT.H
- * Stuffed into tx_status
- ******************************************************/
-#define PHB_TX_TGL ((ushort) 0x02)
-
-/*******************************************************
- * Request intr bit. Set when the queue has gone quiet
- * and the PHB has requested an interrupt.
- ******************************************************/
-#define PHB_TX_INTR ((ushort) 0x100)
-
-/*******************************************************
- * SET if the PHB cannot send any more data down the
- * Link
- ******************************************************/
-#define PHB_TX_HANDSHAKE ((ushort) 0x010)
-
-
-#define RUP_SEND_WNDW ((ushort) 0x08) ;
-
-#endif
-
-/*********** end of file ***********/
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 1998 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : rio.h
-** SID : 1.3
-** Last Modified : 11/6/98 11:34:13
-** Retrieved : 11/6/98 11:34:22
-**
-** ident @(#)rio.h 1.3
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_rio_h__
-#define __rio_rio_h__
-
-/*
-** Maximum numbers of things
-*/
-#define RIO_SLOTS 4 /* number of configuration slots */
-#define RIO_HOSTS 4 /* number of hosts that can be found */
-#define PORTS_PER_HOST 128 /* number of ports per host */
-#define LINKS_PER_UNIT 4 /* number of links from a host */
-#define RIO_PORTS (PORTS_PER_HOST * RIO_HOSTS) /* max. no. of ports */
-#define RTAS_PER_HOST (MAX_RUP) /* number of RTAs per host */
-#define PORTS_PER_RTA (PORTS_PER_HOST/RTAS_PER_HOST) /* ports on a rta */
-#define PORTS_PER_MODULE 4 /* number of ports on a plug-in module */
- /* number of modules on an RTA */
-#define MODULES_PER_RTA (PORTS_PER_RTA/PORTS_PER_MODULE)
-#define MAX_PRODUCT 16 /* numbr of different product codes */
-#define MAX_MODULE_TYPES 16 /* number of different types of module */
-
-#define RIO_CONTROL_DEV 128 /* minor number of host/control device */
-#define RIO_INVALID_MAJOR 0 /* test first host card's major no for validity */
-
-/*
-** number of RTAs that can be bound to a master
-*/
-#define MAX_RTA_BINDINGS (MAX_RUP * RIO_HOSTS)
-
-/*
-** Unit types
-*/
-#define PC_RTA16 0x90000000
-#define PC_RTA8 0xe0000000
-#define TYPE_HOST 0
-#define TYPE_RTA8 1
-#define TYPE_RTA16 2
-
-/*
-** Flag values returned by functions
-*/
-
-#define RIO_FAIL -1
-
-/*
-** SysPort value for something that hasn't any ports
-*/
-#define NO_PORT 0xFFFFFFFF
-
-/*
-** Unit ID Of all hosts
-*/
-#define HOST_ID 0
-
-/*
-** Break bytes into nybles
-*/
-#define LONYBLE(X) ((X) & 0xF)
-#define HINYBLE(X) (((X)>>4) & 0xF)
-
-/*
-** Flag values passed into some functions
-*/
-#define DONT_SLEEP 0
-#define OK_TO_SLEEP 1
-
-#define DONT_PRINT 1
-#define DO_PRINT 0
-
-#define PRINT_TO_LOG_CONS 0
-#define PRINT_TO_CONS 1
-#define PRINT_TO_LOG 2
-
-/*
-** Timeout has trouble with times of less than 3 ticks...
-*/
-#define MIN_TIMEOUT 3
-
-/*
-** Generally useful constants
-*/
-
-#define HUNDRED_MS ((HZ/10)?(HZ/10):1)
-#define ONE_MEG 0x100000
-#define SIXTY_FOUR_K 0x10000
-
-#define RIO_AT_MEM_SIZE SIXTY_FOUR_K
-#define RIO_EISA_MEM_SIZE SIXTY_FOUR_K
-#define RIO_MCA_MEM_SIZE SIXTY_FOUR_K
-
-#define COOK_WELL 0
-#define COOK_MEDIUM 1
-#define COOK_RAW 2
-
-/*
-** Pointer manipulation stuff
-** RIO_PTR takes hostp->Caddr and the offset into the DP RAM area
-** and produces a UNIX caddr_t (pointer) to the object
-** RIO_OBJ takes hostp->Caddr and a UNIX pointer to an object and
-** returns the offset into the DP RAM area.
-*/
-#define RIO_PTR(C,O) (((unsigned char __iomem *)(C))+(0xFFFF&(O)))
-#define RIO_OFF(C,O) ((unsigned char __iomem *)(O)-(unsigned char __iomem *)(C))
-
-/*
-** How to convert from various different device number formats:
-** DEV is a dev number, as passed to open, close etc - NOT a minor
-** number!
-**/
-
-#define RIO_MODEM_MASK 0x1FF
-#define RIO_MODEM_BIT 0x200
-#define RIO_UNMODEM(DEV) (MINOR(DEV) & RIO_MODEM_MASK)
-#define RIO_ISMODEM(DEV) (MINOR(DEV) & RIO_MODEM_BIT)
-#define RIO_PORT(DEV,FIRST_MAJ) ( (MAJOR(DEV) - FIRST_MAJ) * PORTS_PER_HOST) \
- + MINOR(DEV)
-#define CSUM(pkt_ptr) (((u16 *)(pkt_ptr))[0] + ((u16 *)(pkt_ptr))[1] + \
- ((u16 *)(pkt_ptr))[2] + ((u16 *)(pkt_ptr))[3] + \
- ((u16 *)(pkt_ptr))[4] + ((u16 *)(pkt_ptr))[5] + \
- ((u16 *)(pkt_ptr))[6] + ((u16 *)(pkt_ptr))[7] + \
- ((u16 *)(pkt_ptr))[8] + ((u16 *)(pkt_ptr))[9] )
-
-#define RIO_LINK_ENABLE 0x80FF /* FF is a hack, mainly for Mips, to */
- /* prevent a really stupid race condition. */
-
-#define NOT_INITIALISED 0
-#define INITIALISED 1
-
-#define NOT_POLLING 0
-#define POLLING 1
-
-#define NOT_CHANGED 0
-#define CHANGED 1
-
-#define NOT_INUSE 0
-
-#define DISCONNECT 0
-#define CONNECT 1
-
-/* ------ Control Codes ------ */
-
-#define CONTROL '^'
-#define IFOAD ( CONTROL + 1 )
-#define IDENTIFY ( CONTROL + 2 )
-#define ZOMBIE ( CONTROL + 3 )
-#define UFOAD ( CONTROL + 4 )
-#define IWAIT ( CONTROL + 5 )
-
-#define IFOAD_MAGIC 0xF0AD /* of course */
-#define ZOMBIE_MAGIC (~0xDEAD) /* not dead -> zombie */
-#define UFOAD_MAGIC 0xD1E /* kill-your-neighbour */
-#define IWAIT_MAGIC 0xB1DE /* Bide your time */
-
-/* ------ Error Codes ------ */
-
-#define E_NO_ERROR ((ushort) 0)
-
-/* ------ Free Lists ------ */
-
-struct rio_free_list {
- u16 next;
- u16 prev;
-};
-
-/* NULL for card side linked lists */
-#define TPNULL ((ushort)(0x8000))
-/* We can add another packet to a transmit queue if the packet pointer pointed
- * to by the TxAdd pointer has PKT_IN_USE clear in its address. */
-#define PKT_IN_USE 0x1
-
-/* ------ Topology ------ */
-
-struct Top {
- u8 Unit;
- u8 Link;
-};
-
-#endif /* __rio_h__ */
+++ /dev/null
-
-/* rio_linux.c -- Linux driver for the Specialix RIO series cards.
- *
- *
- * (C) 1999 R.E.Wolff@BitWizard.nl
- *
- * Specialix pays for the development and support of this driver.
- * Please DO contact support@specialix.co.uk if you require
- * support. But please read the documentation (rio.txt) first.
- *
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be
- * useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE. See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
- * USA.
- *
- * */
-
-#include <linux/module.h>
-#include <linux/kdev_t.h>
-#include <asm/io.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/mm.h>
-#include <linux/serial.h>
-#include <linux/fcntl.h>
-#include <linux/major.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/miscdevice.h>
-#include <linux/init.h>
-
-#include <linux/generic_serial.h>
-#include <asm/uaccess.h>
-
-#include "linux_compat.h"
-#include "pkt.h"
-#include "daemon.h"
-#include "rio.h"
-#include "riospace.h"
-#include "cmdpkt.h"
-#include "map.h"
-#include "rup.h"
-#include "port.h"
-#include "riodrvr.h"
-#include "rioinfo.h"
-#include "func.h"
-#include "errors.h"
-#include "pci.h"
-
-#include "parmmap.h"
-#include "unixrup.h"
-#include "board.h"
-#include "host.h"
-#include "phb.h"
-#include "link.h"
-#include "cmdblk.h"
-#include "route.h"
-#include "cirrus.h"
-#include "rioioctl.h"
-#include "param.h"
-#include "protsts.h"
-#include "rioboard.h"
-
-
-#include "rio_linux.h"
-
-/* I don't think that this driver can handle more than 512 ports on
-one machine. Specialix specifies max 4 boards in one machine. I don't
-know why. If you want to try anyway you'll have to increase the number
-of boards in rio.h. You'll have to allocate more majors if you need
-more than 512 ports.... */
-
-#ifndef RIO_NORMAL_MAJOR0
-/* This allows overriding on the compiler commandline, or in a "major.h"
- include or something like that */
-#define RIO_NORMAL_MAJOR0 154
-#define RIO_NORMAL_MAJOR1 156
-#endif
-
-#ifndef PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8
-#define PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 0x2000
-#endif
-
-#ifndef RIO_WINDOW_LEN
-#define RIO_WINDOW_LEN 0x10000
-#endif
-
-
-/* Configurable options:
- (Don't be too sure that it'll work if you toggle them) */
-
-/* Am I paranoid or not ? ;-) */
-#undef RIO_PARANOIA_CHECK
-
-
-/* 20 -> 2000 per second. The card should rate-limit interrupts at 1000
- Hz, but it is user configurable. I don't recommend going above 1000
- Hz. The interrupt ratelimit might trigger if the interrupt is
- shared with a very active other device.
- undef this if you want to disable the check....
-*/
-#define IRQ_RATE_LIMIT 200
-
-
-/* These constants are derived from SCO Source */
-static DEFINE_MUTEX(rio_fw_mutex);
-static struct Conf
- RIOConf = {
- /* locator */ "RIO Config here",
- /* startuptime */ HZ * 2,
- /* how long to wait for card to run */
- /* slowcook */ 0,
- /* TRUE -> always use line disc. */
- /* intrpolltime */ 1,
- /* The frequency of OUR polls */
- /* breakinterval */ 25,
- /* x10 mS XXX: units seem to be 1ms not 10! -- REW */
- /* timer */ 10,
- /* mS */
- /* RtaLoadBase */ 0x7000,
- /* HostLoadBase */ 0x7C00,
- /* XpHz */ 5,
- /* number of Xprint hits per second */
- /* XpCps */ 120,
- /* Xprint characters per second */
- /* XpOn */ "\033d#",
- /* start Xprint for a wyse 60 */
- /* XpOff */ "\024",
- /* end Xprint for a wyse 60 */
- /* MaxXpCps */ 2000,
- /* highest Xprint speed */
- /* MinXpCps */ 10,
- /* slowest Xprint speed */
- /* SpinCmds */ 1,
- /* non-zero for mega fast boots */
- /* First Addr */ 0x0A0000,
- /* First address to look at */
- /* Last Addr */ 0xFF0000,
- /* Last address looked at */
- /* BufferSize */ 1024,
- /* Bytes per port of buffering */
- /* LowWater */ 256,
- /* how much data left before wakeup */
- /* LineLength */ 80,
- /* how wide is the console? */
- /* CmdTimeout */ HZ,
- /* how long a close command may take */
-};
-
-
-
-
-/* Function prototypes */
-
-static void rio_disable_tx_interrupts(void *ptr);
-static void rio_enable_tx_interrupts(void *ptr);
-static void rio_disable_rx_interrupts(void *ptr);
-static void rio_enable_rx_interrupts(void *ptr);
-static int rio_carrier_raised(struct tty_port *port);
-static void rio_shutdown_port(void *ptr);
-static int rio_set_real_termios(void *ptr);
-static void rio_hungup(void *ptr);
-static void rio_close(void *ptr);
-static int rio_chars_in_buffer(void *ptr);
-static long rio_fw_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
-static int rio_init_drivers(void);
-
-static void my_hd(void *addr, int len);
-
-static struct tty_driver *rio_driver, *rio_driver2;
-
-/* The name "p" is a bit non-descript. But that's what the rio-lynxos
-sources use all over the place. */
-struct rio_info *p;
-
-int rio_debug;
-
-
-/* You can have the driver poll your card.
- - Set rio_poll to 1 to poll every timer tick (10ms on Intel).
- This is used when the card cannot use an interrupt for some reason.
-*/
-static int rio_poll = 1;
-
-
-/* These are the only open spaces in my computer. Yours may have more
- or less.... */
-static int rio_probe_addrs[] = { 0xc0000, 0xd0000, 0xe0000 };
-
-#define NR_RIO_ADDRS ARRAY_SIZE(rio_probe_addrs)
-
-
-/* Set the mask to all-ones. This alas, only supports 32 interrupts.
- Some architectures may need more. -- Changed to LONG to
- support up to 64 bits on 64bit architectures. -- REW 20/06/99 */
-static long rio_irqmask = -1;
-
-MODULE_AUTHOR("Rogier Wolff <R.E.Wolff@bitwizard.nl>, Patrick van de Lageweg <patrick@bitwizard.nl>");
-MODULE_DESCRIPTION("RIO driver");
-MODULE_LICENSE("GPL");
-module_param(rio_poll, int, 0);
-module_param(rio_debug, int, 0644);
-module_param(rio_irqmask, long, 0);
-
-static struct real_driver rio_real_driver = {
- rio_disable_tx_interrupts,
- rio_enable_tx_interrupts,
- rio_disable_rx_interrupts,
- rio_enable_rx_interrupts,
- rio_shutdown_port,
- rio_set_real_termios,
- rio_chars_in_buffer,
- rio_close,
- rio_hungup,
- NULL
-};
-
-/*
- * Firmware loader driver specific routines
- *
- */
-
-static const struct file_operations rio_fw_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = rio_fw_ioctl,
- .llseek = noop_llseek,
-};
-
-static struct miscdevice rio_fw_device = {
- RIOCTL_MISC_MINOR, "rioctl", &rio_fw_fops
-};
-
-
-
-
-
-#ifdef RIO_PARANOIA_CHECK
-
-/* This doesn't work. Who's paranoid around here? Not me! */
-
-static inline int rio_paranoia_check(struct rio_port const *port, char *name, const char *routine)
-{
-
- static const char *badmagic = KERN_ERR "rio: Warning: bad rio port magic number for device %s in %s\n";
- static const char *badinfo = KERN_ERR "rio: Warning: null rio port for device %s in %s\n";
-
- if (!port) {
- printk(badinfo, name, routine);
- return 1;
- }
- if (port->magic != RIO_MAGIC) {
- printk(badmagic, name, routine);
- return 1;
- }
-
- return 0;
-}
-#else
-#define rio_paranoia_check(a,b,c) 0
-#endif
-
-
-#ifdef DEBUG
-static void my_hd(void *ad, int len)
-{
- int i, j, ch;
- unsigned char *addr = ad;
-
- for (i = 0; i < len; i += 16) {
- rio_dprintk(RIO_DEBUG_PARAM, "%08lx ", (unsigned long) addr + i);
- for (j = 0; j < 16; j++) {
- rio_dprintk(RIO_DEBUG_PARAM, "%02x %s", addr[j + i], (j == 7) ? " " : "");
- }
- for (j = 0; j < 16; j++) {
- ch = addr[j + i];
- rio_dprintk(RIO_DEBUG_PARAM, "%c", (ch < 0x20) ? '.' : ((ch > 0x7f) ? '.' : ch));
- }
- rio_dprintk(RIO_DEBUG_PARAM, "\n");
- }
-}
-#else
-#define my_hd(ad,len) do{/* nothing*/ } while (0)
-#endif
-
-
-/* Delay a number of jiffies, allowing a signal to interrupt */
-int RIODelay(struct Port *PortP, int njiffies)
-{
- func_enter();
-
- rio_dprintk(RIO_DEBUG_DELAY, "delaying %d jiffies\n", njiffies);
- msleep_interruptible(jiffies_to_msecs(njiffies));
- func_exit();
-
- if (signal_pending(current))
- return RIO_FAIL;
- else
- return !RIO_FAIL;
-}
-
-
-/* Delay a number of jiffies, disallowing a signal to interrupt */
-int RIODelay_ni(struct Port *PortP, int njiffies)
-{
- func_enter();
-
- rio_dprintk(RIO_DEBUG_DELAY, "delaying %d jiffies (ni)\n", njiffies);
- msleep(jiffies_to_msecs(njiffies));
- func_exit();
- return !RIO_FAIL;
-}
-
-void rio_copy_to_card(void *from, void __iomem *to, int len)
-{
- rio_copy_toio(to, from, len);
-}
-
-int rio_minor(struct tty_struct *tty)
-{
- return tty->index + ((tty->driver == rio_driver) ? 0 : 256);
-}
-
-static int rio_set_real_termios(void *ptr)
-{
- return RIOParam((struct Port *) ptr, RIOC_CONFIG, 1, 1);
-}
-
-
-static void rio_reset_interrupt(struct Host *HostP)
-{
- func_enter();
-
- switch (HostP->Type) {
- case RIO_AT:
- case RIO_MCA:
- case RIO_PCI:
- writeb(0xFF, &HostP->ResetInt);
- }
-
- func_exit();
-}
-
-
-static irqreturn_t rio_interrupt(int irq, void *ptr)
-{
- struct Host *HostP;
- func_enter();
-
- HostP = ptr; /* &p->RIOHosts[(long)ptr]; */
- rio_dprintk(RIO_DEBUG_IFLOW, "rio: enter rio_interrupt (%d/%d)\n", irq, HostP->Ivec);
-
- /* AAargh! The order in which to do these things is essential and
- not trivial.
-
- - hardware twiddling goes before "recursive". Otherwise when we
- poll the card, and a recursive interrupt happens, we won't
- ack the card, so it might keep on interrupting us. (especially
- level sensitive interrupt systems like PCI).
-
- - Rate limit goes before hardware twiddling. Otherwise we won't
- catch a card that has gone bonkers.
-
- - The "initialized" test goes after the hardware twiddling. Otherwise
- the card will stick us in the interrupt routine again.
-
- - The initialized test goes before recursive.
- */
-
- rio_dprintk(RIO_DEBUG_IFLOW, "rio: We've have noticed the interrupt\n");
- if (HostP->Ivec == irq) {
- /* Tell the card we've noticed the interrupt. */
- rio_reset_interrupt(HostP);
- }
-
- if ((HostP->Flags & RUN_STATE) != RC_RUNNING)
- return IRQ_HANDLED;
-
- if (test_and_set_bit(RIO_BOARD_INTR_LOCK, &HostP->locks)) {
- printk(KERN_ERR "Recursive interrupt! (host %p/irq%d)\n", ptr, HostP->Ivec);
- return IRQ_HANDLED;
- }
-
- RIOServiceHost(p, HostP);
-
- rio_dprintk(RIO_DEBUG_IFLOW, "riointr() doing host %p type %d\n", ptr, HostP->Type);
-
- clear_bit(RIO_BOARD_INTR_LOCK, &HostP->locks);
- rio_dprintk(RIO_DEBUG_IFLOW, "rio: exit rio_interrupt (%d/%d)\n", irq, HostP->Ivec);
- func_exit();
- return IRQ_HANDLED;
-}
-
-
-static void rio_pollfunc(unsigned long data)
-{
- func_enter();
-
- rio_interrupt(0, &p->RIOHosts[data]);
- mod_timer(&p->RIOHosts[data].timer, jiffies + rio_poll);
-
- func_exit();
-}
-
-
-/* ********************************************************************** *
- * Here are the routines that actually *
- * interface with the generic_serial driver *
- * ********************************************************************** */
-
-/* Ehhm. I don't know how to fiddle with interrupts on the Specialix
- cards. .... Hmm. Ok I figured it out. You don't. -- REW */
-
-static void rio_disable_tx_interrupts(void *ptr)
-{
- func_enter();
-
- /* port->gs.port.flags &= ~GS_TX_INTEN; */
-
- func_exit();
-}
-
-
-static void rio_enable_tx_interrupts(void *ptr)
-{
- struct Port *PortP = ptr;
- /* int hn; */
-
- func_enter();
-
- /* hn = PortP->HostP - p->RIOHosts;
-
- rio_dprintk (RIO_DEBUG_TTY, "Pushing host %d\n", hn);
- rio_interrupt (-1,(void *) hn, NULL); */
-
- RIOTxEnable((char *) PortP);
-
- /*
- * In general we cannot count on "tx empty" interrupts, although
- * the interrupt routine seems to be able to tell the difference.
- */
- PortP->gs.port.flags &= ~GS_TX_INTEN;
-
- func_exit();
-}
-
-
-static void rio_disable_rx_interrupts(void *ptr)
-{
- func_enter();
- func_exit();
-}
-
-static void rio_enable_rx_interrupts(void *ptr)
-{
- /* struct rio_port *port = ptr; */
- func_enter();
- func_exit();
-}
-
-
-/* Jeez. Isn't this simple? */
-static int rio_carrier_raised(struct tty_port *port)
-{
- struct Port *PortP = container_of(port, struct Port, gs.port);
- int rv;
-
- func_enter();
- rv = (PortP->ModemState & RIOC_MSVR1_CD) != 0;
-
- rio_dprintk(RIO_DEBUG_INIT, "Getting CD status: %d\n", rv);
-
- func_exit();
- return rv;
-}
-
-
-/* Jeez. Isn't this simple? Actually, we can sync with the actual port
- by just pushing stuff into the queue going to the port... */
-static int rio_chars_in_buffer(void *ptr)
-{
- func_enter();
-
- func_exit();
- return 0;
-}
-
-
-/* Nothing special here... */
-static void rio_shutdown_port(void *ptr)
-{
- struct Port *PortP;
-
- func_enter();
-
- PortP = (struct Port *) ptr;
- PortP->gs.port.tty = NULL;
- func_exit();
-}
-
-
-/* I haven't the foggiest why the decrement use count has to happen
- here. The whole linux serial drivers stuff needs to be redesigned.
- My guess is that this is a hack to minimize the impact of a bug
- elsewhere. Thinking about it some more. (try it sometime) Try
- running minicom on a serial port that is driven by a modularized
- driver. Have the modem hangup. Then remove the driver module. Then
- exit minicom. I expect an "oops". -- REW */
-static void rio_hungup(void *ptr)
-{
- struct Port *PortP;
-
- func_enter();
-
- PortP = (struct Port *) ptr;
- PortP->gs.port.tty = NULL;
-
- func_exit();
-}
-
-
-/* The standard serial_close would become shorter if you'd wrap it like
- this.
- rs_close (...){save_flags;cli;real_close();dec_use_count;restore_flags;}
- */
-static void rio_close(void *ptr)
-{
- struct Port *PortP;
-
- func_enter();
-
- PortP = (struct Port *) ptr;
-
- riotclose(ptr);
-
- if (PortP->gs.port.count) {
- printk(KERN_ERR "WARNING port count:%d\n", PortP->gs.port.count);
- PortP->gs.port.count = 0;
- }
-
- PortP->gs.port.tty = NULL;
- func_exit();
-}
-
-
-
-static long rio_fw_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
- int rc = 0;
- func_enter();
-
- /* The "dev" argument isn't used. */
- mutex_lock(&rio_fw_mutex);
- rc = riocontrol(p, 0, cmd, arg, capable(CAP_SYS_ADMIN));
- mutex_unlock(&rio_fw_mutex);
-
- func_exit();
- return rc;
-}
-
-extern int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len, int arg);
-
-static int rio_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd, unsigned long arg)
-{
- void __user *argp = (void __user *)arg;
- int rc;
- struct Port *PortP;
- int ival;
-
- func_enter();
-
- PortP = (struct Port *) tty->driver_data;
-
- rc = 0;
- switch (cmd) {
- case TIOCSSOFTCAR:
- if ((rc = get_user(ival, (unsigned __user *) argp)) == 0) {
- tty->termios->c_cflag = (tty->termios->c_cflag & ~CLOCAL) | (ival ? CLOCAL : 0);
- }
- break;
- case TIOCGSERIAL:
- rc = -EFAULT;
- if (access_ok(VERIFY_WRITE, argp, sizeof(struct serial_struct)))
- rc = gs_getserial(&PortP->gs, argp);
- break;
- case TCSBRK:
- if (PortP->State & RIO_DELETED) {
- rio_dprintk(RIO_DEBUG_TTY, "BREAK on deleted RTA\n");
- rc = -EIO;
- } else {
- if (RIOShortCommand(p, PortP, RIOC_SBREAK, 2, 250) ==
- RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_INTR, "SBREAK RIOShortCommand failed\n");
- rc = -EIO;
- }
- }
- break;
- case TCSBRKP:
- if (PortP->State & RIO_DELETED) {
- rio_dprintk(RIO_DEBUG_TTY, "BREAK on deleted RTA\n");
- rc = -EIO;
- } else {
- int l;
- l = arg ? arg * 100 : 250;
- if (l > 255)
- l = 255;
- if (RIOShortCommand(p, PortP, RIOC_SBREAK, 2,
- arg ? arg * 100 : 250) == RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_INTR, "SBREAK RIOShortCommand failed\n");
- rc = -EIO;
- }
- }
- break;
- case TIOCSSERIAL:
- rc = -EFAULT;
- if (access_ok(VERIFY_READ, argp, sizeof(struct serial_struct)))
- rc = gs_setserial(&PortP->gs, argp);
- break;
- default:
- rc = -ENOIOCTLCMD;
- break;
- }
- func_exit();
- return rc;
-}
-
-
-/* The throttle/unthrottle scheme for the Specialix card is different
- * from other drivers and deserves some explanation.
- * The Specialix hardware takes care of XON/XOFF
- * and CTS/RTS flow control itself. This means that all we have to
- * do when signalled by the upper tty layer to throttle/unthrottle is
- * to make a note of it here. When we come to read characters from the
- * rx buffers on the card (rio_receive_chars()) we look to see if the
- * upper layer can accept more (as noted here in rio_rx_throt[]).
- * If it can't we simply don't remove chars from the cards buffer.
- * When the tty layer can accept chars, we again note that here and when
- * rio_receive_chars() is called it will remove them from the cards buffer.
- * The card will notice that a ports buffer has drained below some low
- * water mark and will unflow control the line itself, using whatever
- * flow control scheme is in use for that port. -- Simon Allen
- */
-
-static void rio_throttle(struct tty_struct *tty)
-{
- struct Port *port = (struct Port *) tty->driver_data;
-
- func_enter();
- /* If the port is using any type of input flow
- * control then throttle the port.
- */
-
- if ((tty->termios->c_cflag & CRTSCTS) || (I_IXOFF(tty))) {
- port->State |= RIO_THROTTLE_RX;
- }
-
- func_exit();
-}
-
-
-static void rio_unthrottle(struct tty_struct *tty)
-{
- struct Port *port = (struct Port *) tty->driver_data;
-
- func_enter();
- /* Always unthrottle even if flow control is not enabled on
- * this port in case we disabled flow control while the port
- * was throttled
- */
-
- port->State &= ~RIO_THROTTLE_RX;
-
- func_exit();
- return;
-}
-
-
-
-
-
-/* ********************************************************************** *
- * Here are the initialization routines. *
- * ********************************************************************** */
-
-
-static struct vpd_prom *get_VPD_PROM(struct Host *hp)
-{
- static struct vpd_prom vpdp;
- char *p;
- int i;
-
- func_enter();
- rio_dprintk(RIO_DEBUG_PROBE, "Going to verify vpd prom at %p.\n", hp->Caddr + RIO_VPD_ROM);
-
- p = (char *) &vpdp;
- for (i = 0; i < sizeof(struct vpd_prom); i++)
- *p++ = readb(hp->Caddr + RIO_VPD_ROM + i * 2);
- /* read_rio_byte (hp, RIO_VPD_ROM + i*2); */
-
- /* Terminate the identifier string.
- *** requires one extra byte in struct vpd_prom *** */
- *p++ = 0;
-
- if (rio_debug & RIO_DEBUG_PROBE)
- my_hd((char *) &vpdp, 0x20);
-
- func_exit();
-
- return &vpdp;
-}
-
-static const struct tty_operations rio_ops = {
- .open = riotopen,
- .close = gs_close,
- .write = gs_write,
- .put_char = gs_put_char,
- .flush_chars = gs_flush_chars,
- .write_room = gs_write_room,
- .chars_in_buffer = gs_chars_in_buffer,
- .flush_buffer = gs_flush_buffer,
- .ioctl = rio_ioctl,
- .throttle = rio_throttle,
- .unthrottle = rio_unthrottle,
- .set_termios = gs_set_termios,
- .stop = gs_stop,
- .start = gs_start,
- .hangup = gs_hangup,
-};
-
-static int rio_init_drivers(void)
-{
- int error = -ENOMEM;
-
- rio_driver = alloc_tty_driver(256);
- if (!rio_driver)
- goto out;
- rio_driver2 = alloc_tty_driver(256);
- if (!rio_driver2)
- goto out1;
-
- func_enter();
-
- rio_driver->owner = THIS_MODULE;
- rio_driver->driver_name = "specialix_rio";
- rio_driver->name = "ttySR";
- rio_driver->major = RIO_NORMAL_MAJOR0;
- rio_driver->type = TTY_DRIVER_TYPE_SERIAL;
- rio_driver->subtype = SERIAL_TYPE_NORMAL;
- rio_driver->init_termios = tty_std_termios;
- rio_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- rio_driver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(rio_driver, &rio_ops);
-
- rio_driver2->owner = THIS_MODULE;
- rio_driver2->driver_name = "specialix_rio";
- rio_driver2->name = "ttySR";
- rio_driver2->major = RIO_NORMAL_MAJOR1;
- rio_driver2->type = TTY_DRIVER_TYPE_SERIAL;
- rio_driver2->subtype = SERIAL_TYPE_NORMAL;
- rio_driver2->init_termios = tty_std_termios;
- rio_driver2->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- rio_driver2->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(rio_driver2, &rio_ops);
-
- rio_dprintk(RIO_DEBUG_INIT, "set_termios = %p\n", gs_set_termios);
-
- if ((error = tty_register_driver(rio_driver)))
- goto out2;
- if ((error = tty_register_driver(rio_driver2)))
- goto out3;
- func_exit();
- return 0;
- out3:
- tty_unregister_driver(rio_driver);
- out2:
- put_tty_driver(rio_driver2);
- out1:
- put_tty_driver(rio_driver);
- out:
- printk(KERN_ERR "rio: Couldn't register a rio driver, error = %d\n", error);
- return 1;
-}
-
-static const struct tty_port_operations rio_port_ops = {
- .carrier_raised = rio_carrier_raised,
-};
-
-static int rio_init_datastructures(void)
-{
- int i;
- struct Port *port;
- func_enter();
-
- /* Many drivers statically allocate the maximum number of ports
- There is no reason not to allocate them dynamically. Is there? -- REW */
- /* However, the RIO driver allows users to configure their first
- RTA as the ports numbered 504-511. We therefore need to allocate
- the whole range. :-( -- REW */
-
-#define RI_SZ sizeof(struct rio_info)
-#define HOST_SZ sizeof(struct Host)
-#define PORT_SZ sizeof(struct Port *)
-#define TMIO_SZ sizeof(struct termios *)
- rio_dprintk(RIO_DEBUG_INIT, "getting : %Zd %Zd %Zd %Zd %Zd bytes\n", RI_SZ, RIO_HOSTS * HOST_SZ, RIO_PORTS * PORT_SZ, RIO_PORTS * TMIO_SZ, RIO_PORTS * TMIO_SZ);
-
- if (!(p = kzalloc(RI_SZ, GFP_KERNEL)))
- goto free0;
- if (!(p->RIOHosts = kzalloc(RIO_HOSTS * HOST_SZ, GFP_KERNEL)))
- goto free1;
- if (!(p->RIOPortp = kzalloc(RIO_PORTS * PORT_SZ, GFP_KERNEL)))
- goto free2;
- p->RIOConf = RIOConf;
- rio_dprintk(RIO_DEBUG_INIT, "Got : %p %p %p\n", p, p->RIOHosts, p->RIOPortp);
-
-#if 1
- for (i = 0; i < RIO_PORTS; i++) {
- port = p->RIOPortp[i] = kzalloc(sizeof(struct Port), GFP_KERNEL);
- if (!port) {
- goto free6;
- }
- rio_dprintk(RIO_DEBUG_INIT, "initing port %d (%d)\n", i, port->Mapped);
- tty_port_init(&port->gs.port);
- port->gs.port.ops = &rio_port_ops;
- port->PortNum = i;
- port->gs.magic = RIO_MAGIC;
- port->gs.close_delay = HZ / 2;
- port->gs.closing_wait = 30 * HZ;
- port->gs.rd = &rio_real_driver;
- spin_lock_init(&port->portSem);
- }
-#else
- /* We could postpone initializing them to when they are configured. */
-#endif
-
-
-
- if (rio_debug & RIO_DEBUG_INIT) {
- my_hd(&rio_real_driver, sizeof(rio_real_driver));
- }
-
-
- func_exit();
- return 0;
-
- free6:for (i--; i >= 0; i--)
- kfree(p->RIOPortp[i]);
-/*free5:
- free4:
- free3:*/ kfree(p->RIOPortp);
- free2:kfree(p->RIOHosts);
- free1:
- rio_dprintk(RIO_DEBUG_INIT, "Not enough memory! %p %p %p\n", p, p->RIOHosts, p->RIOPortp);
- kfree(p);
- free0:
- return -ENOMEM;
-}
-
-static void __exit rio_release_drivers(void)
-{
- func_enter();
- tty_unregister_driver(rio_driver2);
- tty_unregister_driver(rio_driver);
- put_tty_driver(rio_driver2);
- put_tty_driver(rio_driver);
- func_exit();
-}
-
-
-#ifdef CONFIG_PCI
- /* This was written for SX, but applies to RIO too...
- (including bugs....)
-
- There is another bit besides Bit 17. Turning that bit off
- (on boards shipped with the fix in the eeprom) results in a
- hang on the next access to the card.
- */
-
- /********************************************************
- * Setting bit 17 in the CNTRL register of the PLX 9050 *
- * chip forces a retry on writes while a read is pending.*
- * This is to prevent the card locking up on Intel Xeon *
- * multiprocessor systems with the NX chipset. -- NV *
- ********************************************************/
-
-/* Newer cards are produced with this bit set from the configuration
- EEprom. As the bit is read/write for the CPU, we can fix it here,
- if we detect that it isn't set correctly. -- REW */
-
-static void fix_rio_pci(struct pci_dev *pdev)
-{
- unsigned long hwbase;
- unsigned char __iomem *rebase;
- unsigned int t;
-
-#define CNTRL_REG_OFFSET 0x50
-#define CNTRL_REG_GOODVALUE 0x18260000
-
- hwbase = pci_resource_start(pdev, 0);
- rebase = ioremap(hwbase, 0x80);
- t = readl(rebase + CNTRL_REG_OFFSET);
- if (t != CNTRL_REG_GOODVALUE) {
- printk(KERN_DEBUG "rio: performing cntrl reg fix: %08x -> %08x\n", t, CNTRL_REG_GOODVALUE);
- writel(CNTRL_REG_GOODVALUE, rebase + CNTRL_REG_OFFSET);
- }
- iounmap(rebase);
-}
-#endif
-
-
-static int __init rio_init(void)
-{
- int found = 0;
- int i;
- struct Host *hp;
- int retval;
- struct vpd_prom *vpdp;
- int okboard;
-
-#ifdef CONFIG_PCI
- struct pci_dev *pdev = NULL;
- unsigned short tshort;
-#endif
-
- func_enter();
- rio_dprintk(RIO_DEBUG_INIT, "Initing rio module... (rio_debug=%d)\n", rio_debug);
-
- if (abs((long) (&rio_debug) - rio_debug) < 0x10000) {
- printk(KERN_WARNING "rio: rio_debug is an address, instead of a value. " "Assuming -1. Was %x/%p.\n", rio_debug, &rio_debug);
- rio_debug = -1;
- }
-
- if (misc_register(&rio_fw_device) < 0) {
- printk(KERN_ERR "RIO: Unable to register firmware loader driver.\n");
- return -EIO;
- }
-
- retval = rio_init_datastructures();
- if (retval < 0) {
- misc_deregister(&rio_fw_device);
- return retval;
- }
-#ifdef CONFIG_PCI
- /* First look for the JET devices: */
- while ((pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8, pdev))) {
- u32 tint;
-
- if (pci_enable_device(pdev))
- continue;
-
- /* Specialix has a whole bunch of cards with
- 0x2000 as the device ID. They say its because
- the standard requires it. Stupid standard. */
- /* It seems that reading a word doesn't work reliably on 2.0.
- Also, reading a non-aligned dword doesn't work. So we read the
- whole dword at 0x2c and extract the word at 0x2e (SUBSYSTEM_ID)
- ourselves */
- pci_read_config_dword(pdev, 0x2c, &tint);
- tshort = (tint >> 16) & 0xffff;
- rio_dprintk(RIO_DEBUG_PROBE, "Got a specialix card: %x.\n", tint);
- if (tshort != 0x0100) {
- rio_dprintk(RIO_DEBUG_PROBE, "But it's not a RIO card (%d)...\n", tshort);
- continue;
- }
- rio_dprintk(RIO_DEBUG_PROBE, "cp1\n");
-
- hp = &p->RIOHosts[p->RIONumHosts];
- hp->PaddrP = pci_resource_start(pdev, 2);
- hp->Ivec = pdev->irq;
- if (((1 << hp->Ivec) & rio_irqmask) == 0)
- hp->Ivec = 0;
- hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN);
- hp->CardP = (struct DpRam __iomem *) hp->Caddr;
- hp->Type = RIO_PCI;
- hp->Copy = rio_copy_to_card;
- hp->Mode = RIO_PCI_BOOT_FROM_RAM;
- spin_lock_init(&hp->HostLock);
- rio_reset_interrupt(hp);
- rio_start_card_running(hp);
-
- rio_dprintk(RIO_DEBUG_PROBE, "Going to test it (%p/%p).\n", (void *) p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr);
- if (RIOBoardTest(p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr, RIO_PCI, 0) == 0) {
- rio_dprintk(RIO_DEBUG_INIT, "Done RIOBoardTest\n");
- writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt);
- p->RIOHosts[p->RIONumHosts].UniqueNum =
- ((readb(&p->RIOHosts[p->RIONumHosts].Unique[0]) & 0xFF) << 0) |
- ((readb(&p->RIOHosts[p->RIONumHosts].Unique[1]) & 0xFF) << 8) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[2]) & 0xFF) << 16) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[3]) & 0xFF) << 24);
- rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum);
-
- fix_rio_pci(pdev);
-
- p->RIOHosts[p->RIONumHosts].pdev = pdev;
- pci_dev_get(pdev);
-
- p->RIOLastPCISearch = 0;
- p->RIONumHosts++;
- found++;
- } else {
- iounmap(p->RIOHosts[p->RIONumHosts].Caddr);
- p->RIOHosts[p->RIONumHosts].Caddr = NULL;
- }
- }
-
- /* Then look for the older PCI card.... : */
-
- /* These older PCI cards have problems (only byte-mode access is
- supported), which makes them a bit awkward to support.
- They also have problems sharing interrupts. Be careful.
- (The driver now refuses to share interrupts for these
- cards. This should be sufficient).
- */
-
- /* Then look for the older RIO/PCI devices: */
- while ((pdev = pci_get_device(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_RIO, pdev))) {
- if (pci_enable_device(pdev))
- continue;
-
-#ifdef CONFIG_RIO_OLDPCI
- hp = &p->RIOHosts[p->RIONumHosts];
- hp->PaddrP = pci_resource_start(pdev, 0);
- hp->Ivec = pdev->irq;
- if (((1 << hp->Ivec) & rio_irqmask) == 0)
- hp->Ivec = 0;
- hp->Ivec |= 0x8000; /* Mark as non-sharable */
- hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN);
- hp->CardP = (struct DpRam __iomem *) hp->Caddr;
- hp->Type = RIO_PCI;
- hp->Copy = rio_copy_to_card;
- hp->Mode = RIO_PCI_BOOT_FROM_RAM;
- spin_lock_init(&hp->HostLock);
-
- rio_dprintk(RIO_DEBUG_PROBE, "Ivec: %x\n", hp->Ivec);
- rio_dprintk(RIO_DEBUG_PROBE, "Mode: %x\n", hp->Mode);
-
- rio_reset_interrupt(hp);
- rio_start_card_running(hp);
- rio_dprintk(RIO_DEBUG_PROBE, "Going to test it (%p/%p).\n", (void *) p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr);
- if (RIOBoardTest(p->RIOHosts[p->RIONumHosts].PaddrP, p->RIOHosts[p->RIONumHosts].Caddr, RIO_PCI, 0) == 0) {
- writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt);
- p->RIOHosts[p->RIONumHosts].UniqueNum =
- ((readb(&p->RIOHosts[p->RIONumHosts].Unique[0]) & 0xFF) << 0) |
- ((readb(&p->RIOHosts[p->RIONumHosts].Unique[1]) & 0xFF) << 8) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[2]) & 0xFF) << 16) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[3]) & 0xFF) << 24);
- rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum);
-
- p->RIOHosts[p->RIONumHosts].pdev = pdev;
- pci_dev_get(pdev);
-
- p->RIOLastPCISearch = 0;
- p->RIONumHosts++;
- found++;
- } else {
- iounmap(p->RIOHosts[p->RIONumHosts].Caddr);
- p->RIOHosts[p->RIONumHosts].Caddr = NULL;
- }
-#else
- printk(KERN_ERR "Found an older RIO PCI card, but the driver is not " "compiled to support it.\n");
-#endif
- }
-#endif /* PCI */
-
- /* Now probe for ISA cards... */
- for (i = 0; i < NR_RIO_ADDRS; i++) {
- hp = &p->RIOHosts[p->RIONumHosts];
- hp->PaddrP = rio_probe_addrs[i];
- /* There was something about the IRQs of these cards. 'Forget what.--REW */
- hp->Ivec = 0;
- hp->Caddr = ioremap(p->RIOHosts[p->RIONumHosts].PaddrP, RIO_WINDOW_LEN);
- hp->CardP = (struct DpRam __iomem *) hp->Caddr;
- hp->Type = RIO_AT;
- hp->Copy = rio_copy_to_card; /* AT card PCI???? - PVDL
- * -- YES! this is now a normal copy. Only the
- * old PCI card uses the special PCI copy.
- * Moreover, the ISA card will work with the
- * special PCI copy anyway. -- REW */
- hp->Mode = 0;
- spin_lock_init(&hp->HostLock);
-
- vpdp = get_VPD_PROM(hp);
- rio_dprintk(RIO_DEBUG_PROBE, "Got VPD ROM\n");
- okboard = 0;
- if ((strncmp(vpdp->identifier, RIO_ISA_IDENT, 16) == 0) || (strncmp(vpdp->identifier, RIO_ISA2_IDENT, 16) == 0) || (strncmp(vpdp->identifier, RIO_ISA3_IDENT, 16) == 0)) {
- /* Board is present... */
- if (RIOBoardTest(hp->PaddrP, hp->Caddr, RIO_AT, 0) == 0) {
- /* ... and feeling fine!!!! */
- rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum);
- if (RIOAssignAT(p, hp->PaddrP, hp->Caddr, 0)) {
- rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, host%d uniqid = %x.\n", p->RIONumHosts, p->RIOHosts[p->RIONumHosts - 1].UniqueNum);
- okboard++;
- found++;
- }
- }
-
- if (!okboard) {
- iounmap(hp->Caddr);
- hp->Caddr = NULL;
- }
- }
- }
-
-
- for (i = 0; i < p->RIONumHosts; i++) {
- hp = &p->RIOHosts[i];
- if (hp->Ivec) {
- int mode = IRQF_SHARED;
- if (hp->Ivec & 0x8000) {
- mode = 0;
- hp->Ivec &= 0x7fff;
- }
- rio_dprintk(RIO_DEBUG_INIT, "Requesting interrupt hp: %p rio_interrupt: %d Mode: %x\n", hp, hp->Ivec, hp->Mode);
- retval = request_irq(hp->Ivec, rio_interrupt, mode, "rio", hp);
- rio_dprintk(RIO_DEBUG_INIT, "Return value from request_irq: %d\n", retval);
- if (retval) {
- printk(KERN_ERR "rio: Cannot allocate irq %d.\n", hp->Ivec);
- hp->Ivec = 0;
- }
- rio_dprintk(RIO_DEBUG_INIT, "Got irq %d.\n", hp->Ivec);
- if (hp->Ivec != 0) {
- rio_dprintk(RIO_DEBUG_INIT, "Enabling interrupts on rio card.\n");
- hp->Mode |= RIO_PCI_INT_ENABLE;
- } else
- hp->Mode &= ~RIO_PCI_INT_ENABLE;
- rio_dprintk(RIO_DEBUG_INIT, "New Mode: %x\n", hp->Mode);
- rio_start_card_running(hp);
- }
- /* Init the timer "always" to make sure that it can safely be
- deleted when we unload... */
-
- setup_timer(&hp->timer, rio_pollfunc, i);
- if (!hp->Ivec) {
- rio_dprintk(RIO_DEBUG_INIT, "Starting polling at %dj intervals.\n", rio_poll);
- mod_timer(&hp->timer, jiffies + rio_poll);
- }
- }
-
- if (found) {
- rio_dprintk(RIO_DEBUG_INIT, "rio: total of %d boards detected.\n", found);
- rio_init_drivers();
- } else {
- /* deregister the misc device we created earlier */
- misc_deregister(&rio_fw_device);
- }
-
- func_exit();
- return found ? 0 : -EIO;
-}
-
-
-static void __exit rio_exit(void)
-{
- int i;
- struct Host *hp;
-
- func_enter();
-
- for (i = 0, hp = p->RIOHosts; i < p->RIONumHosts; i++, hp++) {
- RIOHostReset(hp->Type, hp->CardP, hp->Slot);
- if (hp->Ivec) {
- free_irq(hp->Ivec, hp);
- rio_dprintk(RIO_DEBUG_INIT, "freed irq %d.\n", hp->Ivec);
- }
- /* It is safe/allowed to del_timer a non-active timer */
- del_timer_sync(&hp->timer);
- if (hp->Caddr)
- iounmap(hp->Caddr);
- if (hp->Type == RIO_PCI)
- pci_dev_put(hp->pdev);
- }
-
- if (misc_deregister(&rio_fw_device) < 0) {
- printk(KERN_INFO "rio: couldn't deregister control-device\n");
- }
-
-
- rio_dprintk(RIO_DEBUG_CLEANUP, "Cleaning up drivers\n");
-
- rio_release_drivers();
-
- /* Release dynamically allocated memory */
- kfree(p->RIOPortp);
- kfree(p->RIOHosts);
- kfree(p);
-
- func_exit();
-}
-
-module_init(rio_init);
-module_exit(rio_exit);
+++ /dev/null
-
-/*
- * rio_linux.h
- *
- * Copyright (C) 1998,1999,2000 R.E.Wolff@BitWizard.nl
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * RIO serial driver.
- *
- * Version 1.0 -- July, 1999.
- *
- */
-
-#define RIO_NBOARDS 4
-#define RIO_PORTSPERBOARD 128
-#define RIO_NPORTS (RIO_NBOARDS * RIO_PORTSPERBOARD)
-
-#define MODEM_SUPPORT
-
-#ifdef __KERNEL__
-
-#define RIO_MAGIC 0x12345678
-
-
-struct vpd_prom {
- unsigned short id;
- char hwrev;
- char hwass;
- int uniqid;
- char myear;
- char mweek;
- char hw_feature[5];
- char oem_id;
- char identifier[16];
-};
-
-
-#define RIO_DEBUG_ALL 0xffffffff
-
-#define O_OTHER(tty) \
- ((O_OLCUC(tty)) ||\
- (O_ONLCR(tty)) ||\
- (O_OCRNL(tty)) ||\
- (O_ONOCR(tty)) ||\
- (O_ONLRET(tty)) ||\
- (O_OFILL(tty)) ||\
- (O_OFDEL(tty)) ||\
- (O_NLDLY(tty)) ||\
- (O_CRDLY(tty)) ||\
- (O_TABDLY(tty)) ||\
- (O_BSDLY(tty)) ||\
- (O_VTDLY(tty)) ||\
- (O_FFDLY(tty)))
-
-/* Same for input. */
-#define I_OTHER(tty) \
- ((I_INLCR(tty)) ||\
- (I_IGNCR(tty)) ||\
- (I_ICRNL(tty)) ||\
- (I_IUCLC(tty)) ||\
- (L_ISIG(tty)))
-
-
-#endif /* __KERNEL__ */
-
-
-#define RIO_BOARD_INTR_LOCK 1
-
-
-#ifndef RIOCTL_MISC_MINOR
-/* Allow others to gather this into "major.h" or something like that */
-#define RIOCTL_MISC_MINOR 169
-#endif
-
-
-/* Allow us to debug "in the field" without requiring clients to
- recompile.... */
-#if 1
-#define rio_spin_lock_irqsave(sem, flags) do { \
- rio_dprintk (RIO_DEBUG_SPINLOCK, "spinlockirqsave: %p %s:%d\n", \
- sem, __FILE__, __LINE__);\
- spin_lock_irqsave(sem, flags);\
- } while (0)
-
-#define rio_spin_unlock_irqrestore(sem, flags) do { \
- rio_dprintk (RIO_DEBUG_SPINLOCK, "spinunlockirqrestore: %p %s:%d\n",\
- sem, __FILE__, __LINE__);\
- spin_unlock_irqrestore(sem, flags);\
- } while (0)
-
-#define rio_spin_lock(sem) do { \
- rio_dprintk (RIO_DEBUG_SPINLOCK, "spinlock: %p %s:%d\n",\
- sem, __FILE__, __LINE__);\
- spin_lock(sem);\
- } while (0)
-
-#define rio_spin_unlock(sem) do { \
- rio_dprintk (RIO_DEBUG_SPINLOCK, "spinunlock: %p %s:%d\n",\
- sem, __FILE__, __LINE__);\
- spin_unlock(sem);\
- } while (0)
-#else
-#define rio_spin_lock_irqsave(sem, flags) \
- spin_lock_irqsave(sem, flags)
-
-#define rio_spin_unlock_irqrestore(sem, flags) \
- spin_unlock_irqrestore(sem, flags)
-
-#define rio_spin_lock(sem) \
- spin_lock(sem)
-
-#define rio_spin_unlock(sem) \
- spin_unlock(sem)
-
-#endif
-
-
-
-#ifdef CONFIG_RIO_OLDPCI
-static inline void __iomem *rio_memcpy_toio(void __iomem *dummy, void __iomem *dest, void *source, int n)
-{
- char __iomem *dst = dest;
- char *src = source;
-
- while (n--) {
- writeb(*src++, dst++);
- (void) readb(dummy);
- }
-
- return dest;
-}
-
-static inline void __iomem *rio_copy_toio(void __iomem *dest, void *source, int n)
-{
- char __iomem *dst = dest;
- char *src = source;
-
- while (n--)
- writeb(*src++, dst++);
-
- return dest;
-}
-
-
-static inline void *rio_memcpy_fromio(void *dest, void __iomem *source, int n)
-{
- char *dst = dest;
- char __iomem *src = source;
-
- while (n--)
- *dst++ = readb(src++);
-
- return dest;
-}
-
-#else
-#define rio_memcpy_toio(dummy,dest,source,n) memcpy_toio(dest, source, n)
-#define rio_copy_toio memcpy_toio
-#define rio_memcpy_fromio memcpy_fromio
-#endif
-
-#define DEBUG 1
-
-
-/*
- This driver can spew a whole lot of debugging output at you. If you
- need maximum performance, you should disable the DEBUG define. To
- aid in debugging in the field, I'm leaving the compile-time debug
- features enabled, and disable them "runtime". That allows me to
- instruct people with problems to enable debugging without requiring
- them to recompile...
-*/
-
-#ifdef DEBUG
-#define rio_dprintk(f, str...) do { if (rio_debug & f) printk (str);} while (0)
-#define func_enter() rio_dprintk (RIO_DEBUG_FLOW, "rio: enter %s\n", __func__)
-#define func_exit() rio_dprintk (RIO_DEBUG_FLOW, "rio: exit %s\n", __func__)
-#define func_enter2() rio_dprintk (RIO_DEBUG_FLOW, "rio: enter %s (port %d)\n",__func__, port->line)
-#else
-#define rio_dprintk(f, str...) /* nothing */
-#define func_enter()
-#define func_exit()
-#define func_enter2()
-#endif
+++ /dev/null
-/************************************************************************/
-/* */
-/* Title : RIO Host Card Hardware Definitions */
-/* */
-/* Author : N.P.Vassallo */
-/* */
-/* Creation : 26th April 1999 */
-/* */
-/* Version : 1.0.0 */
-/* */
-/* Copyright : (c) Specialix International Ltd. 1999 *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- * */
-/* Description : Prototypes, structures and definitions */
-/* describing the RIO board hardware */
-/* */
-/************************************************************************/
-
-#ifndef _rioboard_h /* If RIOBOARD.H not already defined */
-#define _rioboard_h 1
-
-/*****************************************************************************
-*********************** ***********************
-*********************** Hardware Control Registers ***********************
-*********************** ***********************
-*****************************************************************************/
-
-/* Hardware Registers... */
-
-#define RIO_REG_BASE 0x7C00 /* Base of control registers */
-
-#define RIO_CONFIG RIO_REG_BASE + 0x0000 /* WRITE: Configuration Register */
-#define RIO_INTSET RIO_REG_BASE + 0x0080 /* WRITE: Interrupt Set */
-#define RIO_RESET RIO_REG_BASE + 0x0100 /* WRITE: Host Reset */
-#define RIO_INTRESET RIO_REG_BASE + 0x0180 /* WRITE: Interrupt Reset */
-
-#define RIO_VPD_ROM RIO_REG_BASE + 0x0000 /* READ: Vital Product Data ROM */
-#define RIO_INTSTAT RIO_REG_BASE + 0x0080 /* READ: Interrupt Status (Jet boards only) */
-#define RIO_RESETSTAT RIO_REG_BASE + 0x0100 /* READ: Reset Status (Jet boards only) */
-
-/* RIO_VPD_ROM definitions... */
-#define VPD_SLX_ID1 0x00 /* READ: Specialix Identifier #1 */
-#define VPD_SLX_ID2 0x01 /* READ: Specialix Identifier #2 */
-#define VPD_HW_REV 0x02 /* READ: Hardware Revision */
-#define VPD_HW_ASSEM 0x03 /* READ: Hardware Assembly Level */
-#define VPD_UNIQUEID4 0x04 /* READ: Unique Identifier #4 */
-#define VPD_UNIQUEID3 0x05 /* READ: Unique Identifier #3 */
-#define VPD_UNIQUEID2 0x06 /* READ: Unique Identifier #2 */
-#define VPD_UNIQUEID1 0x07 /* READ: Unique Identifier #1 */
-#define VPD_MANU_YEAR 0x08 /* READ: Year Of Manufacture (0 = 1970) */
-#define VPD_MANU_WEEK 0x09 /* READ: Week Of Manufacture (0 = week 1 Jan) */
-#define VPD_HWFEATURE1 0x0A /* READ: Hardware Feature Byte 1 */
-#define VPD_HWFEATURE2 0x0B /* READ: Hardware Feature Byte 2 */
-#define VPD_HWFEATURE3 0x0C /* READ: Hardware Feature Byte 3 */
-#define VPD_HWFEATURE4 0x0D /* READ: Hardware Feature Byte 4 */
-#define VPD_HWFEATURE5 0x0E /* READ: Hardware Feature Byte 5 */
-#define VPD_OEMID 0x0F /* READ: OEM Identifier */
-#define VPD_IDENT 0x10 /* READ: Identifier string (16 bytes) */
-#define VPD_IDENT_LEN 0x10
-
-/* VPD ROM Definitions... */
-#define SLX_ID1 0x4D
-#define SLX_ID2 0x98
-
-#define PRODUCT_ID(a) ((a>>4)&0xF) /* Use to obtain Product ID from VPD_UNIQUEID1 */
-
-#define ID_SX_ISA 0x2
-#define ID_RIO_EISA 0x3
-#define ID_SX_PCI 0x5
-#define ID_SX_EISA 0x7
-#define ID_RIO_RTA16 0x9
-#define ID_RIO_ISA 0xA
-#define ID_RIO_MCA 0xB
-#define ID_RIO_SBUS 0xC
-#define ID_RIO_PCI 0xD
-#define ID_RIO_RTA8 0xE
-
-/* Transputer bootstrap definitions... */
-
-#define BOOTLOADADDR (0x8000 - 6)
-#define BOOTINDICATE (0x8000 - 2)
-
-/* Firmware load position... */
-
-#define FIRMWARELOADADDR 0x7C00 /* Firmware is loaded _before_ this address */
-
-/*****************************************************************************
-***************************** *****************************
-***************************** RIO (Rev1) ISA *****************************
-***************************** *****************************
-*****************************************************************************/
-
-/* Control Register Definitions... */
-#define RIO_ISA_IDENT "JBJGPGGHINSMJPJR"
-
-#define RIO_ISA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */
-#define RIO_ISA_CFG_BUSENABLE 0x02 /* Enable processor bus */
-#define RIO_ISA_CFG_IRQMASK 0x30 /* Interrupt mask */
-#define RIO_ISA_CFG_IRQ12 0x10 /* Interrupt Level 12 */
-#define RIO_ISA_CFG_IRQ11 0x20 /* Interrupt Level 11 */
-#define RIO_ISA_CFG_IRQ9 0x30 /* Interrupt Level 9 */
-#define RIO_ISA_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */
-#define RIO_ISA_CFG_WAITSTATE0 0x80 /* 0 waitstates, else 1 */
-
-/*****************************************************************************
-***************************** *****************************
-***************************** RIO (Rev2) ISA *****************************
-***************************** *****************************
-*****************************************************************************/
-
-/* Control Register Definitions... */
-#define RIO_ISA2_IDENT "JBJGPGGHINSMJPJR"
-
-#define RIO_ISA2_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */
-#define RIO_ISA2_CFG_BUSENABLE 0x02 /* Enable processor bus */
-#define RIO_ISA2_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */
-#define RIO_ISA2_CFG_16BIT 0x08 /* 16bit mode, else 8bit */
-#define RIO_ISA2_CFG_IRQMASK 0x30 /* Interrupt mask */
-#define RIO_ISA2_CFG_IRQ15 0x00 /* Interrupt Level 15 */
-#define RIO_ISA2_CFG_IRQ12 0x10 /* Interrupt Level 12 */
-#define RIO_ISA2_CFG_IRQ11 0x20 /* Interrupt Level 11 */
-#define RIO_ISA2_CFG_IRQ9 0x30 /* Interrupt Level 9 */
-#define RIO_ISA2_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */
-#define RIO_ISA2_CFG_WAITSTATE0 0x80 /* 0 waitstates, else 1 */
-
-/*****************************************************************************
-***************************** ******************************
-***************************** RIO (Jet) ISA ******************************
-***************************** ******************************
-*****************************************************************************/
-
-/* Control Register Definitions... */
-#define RIO_ISA3_IDENT "JET HOST BY KEV#"
-
-#define RIO_ISA3_CFG_BUSENABLE 0x02 /* Enable processor bus */
-#define RIO_ISA3_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */
-#define RIO_ISA32_CFG_IRQMASK 0xF30 /* Interrupt mask */
-#define RIO_ISA3_CFG_IRQ15 0xF0 /* Interrupt Level 15 */
-#define RIO_ISA3_CFG_IRQ12 0xC0 /* Interrupt Level 12 */
-#define RIO_ISA3_CFG_IRQ11 0xB0 /* Interrupt Level 11 */
-#define RIO_ISA3_CFG_IRQ10 0xA0 /* Interrupt Level 10 */
-#define RIO_ISA3_CFG_IRQ9 0x90 /* Interrupt Level 9 */
-
-/*****************************************************************************
-********************************* ********************************
-********************************* RIO MCA ********************************
-********************************* ********************************
-*****************************************************************************/
-
-/* Control Register Definitions... */
-#define RIO_MCA_IDENT "JBJGPGGHINSMJPJR"
-
-#define RIO_MCA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */
-#define RIO_MCA_CFG_BUSENABLE 0x02 /* Enable processor bus */
-#define RIO_MCA_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */
-
-/*****************************************************************************
-******************************** ********************************
-******************************** RIO EISA ********************************
-******************************** ********************************
-*****************************************************************************/
-
-/* EISA Configuration Space Definitions... */
-#define EISA_PRODUCT_ID1 0xC80
-#define EISA_PRODUCT_ID2 0xC81
-#define EISA_PRODUCT_NUMBER 0xC82
-#define EISA_REVISION_NUMBER 0xC83
-#define EISA_CARD_ENABLE 0xC84
-#define EISA_VPD_UNIQUEID4 0xC88 /* READ: Unique Identifier #4 */
-#define EISA_VPD_UNIQUEID3 0xC8A /* READ: Unique Identifier #3 */
-#define EISA_VPD_UNIQUEID2 0xC90 /* READ: Unique Identifier #2 */
-#define EISA_VPD_UNIQUEID1 0xC92 /* READ: Unique Identifier #1 */
-#define EISA_VPD_MANU_YEAR 0xC98 /* READ: Year Of Manufacture (0 = 1970) */
-#define EISA_VPD_MANU_WEEK 0xC9A /* READ: Week Of Manufacture (0 = week 1 Jan) */
-#define EISA_MEM_ADDR_23_16 0xC00
-#define EISA_MEM_ADDR_31_24 0xC01
-#define EISA_RIO_CONFIG 0xC02 /* WRITE: Configuration Register */
-#define EISA_RIO_INTSET 0xC03 /* WRITE: Interrupt Set */
-#define EISA_RIO_INTRESET 0xC03 /* READ: Interrupt Reset */
-
-/* Control Register Definitions... */
-#define RIO_EISA_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */
-#define RIO_EISA_CFG_LINK20 0x02 /* 20Mbps link, else 10Mbps */
-#define RIO_EISA_CFG_BUSENABLE 0x04 /* Enable processor bus */
-#define RIO_EISA_CFG_PROCRUN 0x08 /* Processor running, else reset */
-#define RIO_EISA_CFG_IRQMASK 0xF0 /* Interrupt mask */
-#define RIO_EISA_CFG_IRQ15 0xF0 /* Interrupt Level 15 */
-#define RIO_EISA_CFG_IRQ14 0xE0 /* Interrupt Level 14 */
-#define RIO_EISA_CFG_IRQ12 0xC0 /* Interrupt Level 12 */
-#define RIO_EISA_CFG_IRQ11 0xB0 /* Interrupt Level 11 */
-#define RIO_EISA_CFG_IRQ10 0xA0 /* Interrupt Level 10 */
-#define RIO_EISA_CFG_IRQ9 0x90 /* Interrupt Level 9 */
-#define RIO_EISA_CFG_IRQ7 0x70 /* Interrupt Level 7 */
-#define RIO_EISA_CFG_IRQ6 0x60 /* Interrupt Level 6 */
-#define RIO_EISA_CFG_IRQ5 0x50 /* Interrupt Level 5 */
-#define RIO_EISA_CFG_IRQ4 0x40 /* Interrupt Level 4 */
-#define RIO_EISA_CFG_IRQ3 0x30 /* Interrupt Level 3 */
-
-/*****************************************************************************
-******************************** ********************************
-******************************** RIO SBus ********************************
-******************************** ********************************
-*****************************************************************************/
-
-/* Control Register Definitions... */
-#define RIO_SBUS_IDENT "JBPGK#\0\0\0\0\0\0\0\0\0\0"
-
-#define RIO_SBUS_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */
-#define RIO_SBUS_CFG_BUSENABLE 0x02 /* Enable processor bus */
-#define RIO_SBUS_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */
-#define RIO_SBUS_CFG_IRQMASK 0x38 /* Interrupt mask */
-#define RIO_SBUS_CFG_IRQNONE 0x00 /* No Interrupt */
-#define RIO_SBUS_CFG_IRQ7 0x38 /* Interrupt Level 7 */
-#define RIO_SBUS_CFG_IRQ6 0x30 /* Interrupt Level 6 */
-#define RIO_SBUS_CFG_IRQ5 0x28 /* Interrupt Level 5 */
-#define RIO_SBUS_CFG_IRQ4 0x20 /* Interrupt Level 4 */
-#define RIO_SBUS_CFG_IRQ3 0x18 /* Interrupt Level 3 */
-#define RIO_SBUS_CFG_IRQ2 0x10 /* Interrupt Level 2 */
-#define RIO_SBUS_CFG_IRQ1 0x08 /* Interrupt Level 1 */
-#define RIO_SBUS_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */
-#define RIO_SBUS_CFG_PROC25 0x80 /* 25Mhz processor clock, else 20Mhz */
-
-/*****************************************************************************
-********************************* ********************************
-********************************* RIO PCI ********************************
-********************************* ********************************
-*****************************************************************************/
-
-/* Control Register Definitions... */
-#define RIO_PCI_IDENT "ECDDPGJGJHJRGSK#"
-
-#define RIO_PCI_CFG_BOOTRAM 0x01 /* Boot from RAM, else Link */
-#define RIO_PCI_CFG_BUSENABLE 0x02 /* Enable processor bus */
-#define RIO_PCI_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */
-#define RIO_PCI_CFG_LINK20 0x40 /* 20Mbps link, else 10Mbps */
-#define RIO_PCI_CFG_PROC25 0x80 /* 25Mhz processor clock, else 20Mhz */
-
-/* PCI Definitions... */
-#define SPX_VENDOR_ID 0x11CB /* Assigned by the PCI SIG */
-#define SPX_DEVICE_ID 0x8000 /* RIO bridge boards */
-#define SPX_PLXDEVICE_ID 0x2000 /* PLX bridge boards */
-#define SPX_SUB_VENDOR_ID SPX_VENDOR_ID /* Same as vendor id */
-#define RIO_SUB_SYS_ID 0x0800 /* RIO PCI board */
-
-/*****************************************************************************
-***************************** ******************************
-***************************** RIO (Jet) PCI ******************************
-***************************** ******************************
-*****************************************************************************/
-
-/* Control Register Definitions... */
-#define RIO_PCI2_IDENT "JET HOST BY KEV#"
-
-#define RIO_PCI2_CFG_BUSENABLE 0x02 /* Enable processor bus */
-#define RIO_PCI2_CFG_INTENABLE 0x04 /* Interrupt enable, else disable */
-
-/* PCI Definitions... */
-#define RIO2_SUB_SYS_ID 0x0100 /* RIO (Jet) PCI board */
-
-#endif /*_rioboard_h */
-
-/* End of RIOBOARD.H */
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : rioboot.c
-** SID : 1.3
-** Last Modified : 11/6/98 10:33:36
-** Retrieved : 11/6/98 10:33:48
-**
-** ident @(#)rioboot.c 1.3
-**
-** -----------------------------------------------------------------------------
-*/
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/termios.h>
-#include <linux/serial.h>
-#include <linux/vmalloc.h>
-#include <linux/generic_serial.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-
-
-#include "linux_compat.h"
-#include "rio_linux.h"
-#include "pkt.h"
-#include "daemon.h"
-#include "rio.h"
-#include "riospace.h"
-#include "cmdpkt.h"
-#include "map.h"
-#include "rup.h"
-#include "port.h"
-#include "riodrvr.h"
-#include "rioinfo.h"
-#include "func.h"
-#include "errors.h"
-#include "pci.h"
-
-#include "parmmap.h"
-#include "unixrup.h"
-#include "board.h"
-#include "host.h"
-#include "phb.h"
-#include "link.h"
-#include "cmdblk.h"
-#include "route.h"
-
-static int RIOBootComplete(struct rio_info *p, struct Host *HostP, unsigned int Rup, struct PktCmd __iomem *PktCmdP);
-
-static const unsigned char RIOAtVec2Ctrl[] = {
- /* 0 */ INTERRUPT_DISABLE,
- /* 1 */ INTERRUPT_DISABLE,
- /* 2 */ INTERRUPT_DISABLE,
- /* 3 */ INTERRUPT_DISABLE,
- /* 4 */ INTERRUPT_DISABLE,
- /* 5 */ INTERRUPT_DISABLE,
- /* 6 */ INTERRUPT_DISABLE,
- /* 7 */ INTERRUPT_DISABLE,
- /* 8 */ INTERRUPT_DISABLE,
- /* 9 */ IRQ_9 | INTERRUPT_ENABLE,
- /* 10 */ INTERRUPT_DISABLE,
- /* 11 */ IRQ_11 | INTERRUPT_ENABLE,
- /* 12 */ IRQ_12 | INTERRUPT_ENABLE,
- /* 13 */ INTERRUPT_DISABLE,
- /* 14 */ INTERRUPT_DISABLE,
- /* 15 */ IRQ_15 | INTERRUPT_ENABLE
-};
-
-/**
- * RIOBootCodeRTA - Load RTA boot code
- * @p: RIO to load
- * @rbp: Download descriptor
- *
- * Called when the user process initiates booting of the card firmware.
- * Lads the firmware
- */
-
-int RIOBootCodeRTA(struct rio_info *p, struct DownLoad * rbp)
-{
- int offset;
-
- func_enter();
-
- rio_dprintk(RIO_DEBUG_BOOT, "Data at user address %p\n", rbp->DataP);
-
- /*
- ** Check that we have set aside enough memory for this
- */
- if (rbp->Count > SIXTY_FOUR_K) {
- rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot Code Too Large!\n");
- p->RIOError.Error = HOST_FILE_TOO_LARGE;
- func_exit();
- return -ENOMEM;
- }
-
- if (p->RIOBooting) {
- rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot Code : BUSY BUSY BUSY!\n");
- p->RIOError.Error = BOOT_IN_PROGRESS;
- func_exit();
- return -EBUSY;
- }
-
- /*
- ** The data we load in must end on a (RTA_BOOT_DATA_SIZE) byte boundary,
- ** so calculate how far we have to move the data up the buffer
- ** to achieve this.
- */
- offset = (RTA_BOOT_DATA_SIZE - (rbp->Count % RTA_BOOT_DATA_SIZE)) % RTA_BOOT_DATA_SIZE;
-
- /*
- ** Be clean, and clear the 'unused' portion of the boot buffer,
- ** because it will (eventually) be part of the Rta run time environment
- ** and so should be zeroed.
- */
- memset(p->RIOBootPackets, 0, offset);
-
- /*
- ** Copy the data from user space into the array
- */
-
- if (copy_from_user(((u8 *)p->RIOBootPackets) + offset, rbp->DataP, rbp->Count)) {
- rio_dprintk(RIO_DEBUG_BOOT, "Bad data copy from user space\n");
- p->RIOError.Error = COPYIN_FAILED;
- func_exit();
- return -EFAULT;
- }
-
- /*
- ** Make sure that our copy of the size includes that offset we discussed
- ** earlier.
- */
- p->RIONumBootPkts = (rbp->Count + offset) / RTA_BOOT_DATA_SIZE;
- p->RIOBootCount = rbp->Count;
-
- func_exit();
- return 0;
-}
-
-/**
- * rio_start_card_running - host card start
- * @HostP: The RIO to kick off
- *
- * Start a RIO processor unit running. Encapsulates the knowledge
- * of the card type.
- */
-
-void rio_start_card_running(struct Host *HostP)
-{
- switch (HostP->Type) {
- case RIO_AT:
- rio_dprintk(RIO_DEBUG_BOOT, "Start ISA card running\n");
- writeb(BOOT_FROM_RAM | EXTERNAL_BUS_ON | HostP->Mode | RIOAtVec2Ctrl[HostP->Ivec & 0xF], &HostP->Control);
- break;
- case RIO_PCI:
- /*
- ** PCI is much the same as MCA. Everything is once again memory
- ** mapped, so we are writing to memory registers instead of io
- ** ports.
- */
- rio_dprintk(RIO_DEBUG_BOOT, "Start PCI card running\n");
- writeb(PCITpBootFromRam | PCITpBusEnable | HostP->Mode, &HostP->Control);
- break;
- default:
- rio_dprintk(RIO_DEBUG_BOOT, "Unknown host type %d\n", HostP->Type);
- break;
- }
- return;
-}
-
-/*
-** Load in the host boot code - load it directly onto all halted hosts
-** of the correct type.
-**
-** Put your rubber pants on before messing with this code - even the magic
-** numbers have trouble understanding what they are doing here.
-*/
-
-int RIOBootCodeHOST(struct rio_info *p, struct DownLoad *rbp)
-{
- struct Host *HostP;
- u8 __iomem *Cad;
- PARM_MAP __iomem *ParmMapP;
- int RupN;
- int PortN;
- unsigned int host;
- u8 __iomem *StartP;
- u8 __iomem *DestP;
- int wait_count;
- u16 OldParmMap;
- u16 offset; /* It is very important that this is a u16 */
- u8 *DownCode = NULL;
- unsigned long flags;
-
- HostP = NULL; /* Assure the compiler we've initialized it */
-
-
- /* Walk the hosts */
- for (host = 0; host < p->RIONumHosts; host++) {
- rio_dprintk(RIO_DEBUG_BOOT, "Attempt to boot host %d\n", host);
- HostP = &p->RIOHosts[host];
-
- rio_dprintk(RIO_DEBUG_BOOT, "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n", HostP->Type, HostP->Mode, HostP->Ivec);
-
- /* Don't boot hosts already running */
- if ((HostP->Flags & RUN_STATE) != RC_WAITING) {
- rio_dprintk(RIO_DEBUG_BOOT, "%s %d already running\n", "Host", host);
- continue;
- }
-
- /*
- ** Grab a pointer to the card (ioremapped)
- */
- Cad = HostP->Caddr;
-
- /*
- ** We are going to (try) and load in rbp->Count bytes.
- ** The last byte will reside at p->RIOConf.HostLoadBase-1;
- ** Therefore, we need to start copying at address
- ** (caddr+p->RIOConf.HostLoadBase-rbp->Count)
- */
- StartP = &Cad[p->RIOConf.HostLoadBase - rbp->Count];
-
- rio_dprintk(RIO_DEBUG_BOOT, "kernel virtual address for host is %p\n", Cad);
- rio_dprintk(RIO_DEBUG_BOOT, "kernel virtual address for download is %p\n", StartP);
- rio_dprintk(RIO_DEBUG_BOOT, "host loadbase is 0x%x\n", p->RIOConf.HostLoadBase);
- rio_dprintk(RIO_DEBUG_BOOT, "size of download is 0x%x\n", rbp->Count);
-
- /* Make sure it fits */
- if (p->RIOConf.HostLoadBase < rbp->Count) {
- rio_dprintk(RIO_DEBUG_BOOT, "Bin too large\n");
- p->RIOError.Error = HOST_FILE_TOO_LARGE;
- func_exit();
- return -EFBIG;
- }
- /*
- ** Ensure that the host really is stopped.
- ** Disable it's external bus & twang its reset line.
- */
- RIOHostReset(HostP->Type, HostP->CardP, HostP->Slot);
-
- /*
- ** Copy the data directly from user space to the SRAM.
- ** This ain't going to be none too clever if the download
- ** code is bigger than this segment.
- */
- rio_dprintk(RIO_DEBUG_BOOT, "Copy in code\n");
-
- /* Buffer to local memory as we want to use I/O space and
- some cards only do 8 or 16 bit I/O */
-
- DownCode = vmalloc(rbp->Count);
- if (!DownCode) {
- p->RIOError.Error = NOT_ENOUGH_CORE_FOR_PCI_COPY;
- func_exit();
- return -ENOMEM;
- }
- if (copy_from_user(DownCode, rbp->DataP, rbp->Count)) {
- kfree(DownCode);
- p->RIOError.Error = COPYIN_FAILED;
- func_exit();
- return -EFAULT;
- }
- HostP->Copy(DownCode, StartP, rbp->Count);
- vfree(DownCode);
-
- rio_dprintk(RIO_DEBUG_BOOT, "Copy completed\n");
-
- /*
- ** S T O P !
- **
- ** Up to this point the code has been fairly rational, and possibly
- ** even straight forward. What follows is a pile of crud that will
- ** magically turn into six bytes of transputer assembler. Normally
- ** you would expect an array or something, but, being me, I have
- ** chosen [been told] to use a technique whereby the startup code
- ** will be correct if we change the loadbase for the code. Which
- ** brings us onto another issue - the loadbase is the *end* of the
- ** code, not the start.
- **
- ** If I were you I wouldn't start from here.
- */
-
- /*
- ** We now need to insert a short boot section into
- ** the memory at the end of Sram2. This is normally (de)composed
- ** of the last eight bytes of the download code. The
- ** download has been assembled/compiled to expect to be
- ** loaded from 0x7FFF downwards. We have loaded it
- ** at some other address. The startup code goes into the small
- ** ram window at Sram2, in the last 8 bytes, which are really
- ** at addresses 0x7FF8-0x7FFF.
- **
- ** If the loadbase is, say, 0x7C00, then we need to branch to
- ** address 0x7BFE to run the host.bin startup code. We assemble
- ** this jump manually.
- **
- ** The two byte sequence 60 08 is loaded into memory at address
- ** 0x7FFE,F. This is a local branch to location 0x7FF8 (60 is nfix 0,
- ** which adds '0' to the .O register, complements .O, and then shifts
- ** it left by 4 bit positions, 08 is a jump .O+8 instruction. This will
- ** add 8 to .O (which was 0xFFF0), and will branch RELATIVE to the new
- ** location. Now, the branch starts from the value of .PC (or .IP or
- ** whatever the bloody register is called on this chip), and the .PC
- ** will be pointing to the location AFTER the branch, in this case
- ** .PC == 0x8000, so the branch will be to 0x8000+0xFFF8 = 0x7FF8.
- **
- ** A long branch is coded at 0x7FF8. This consists of loading a four
- ** byte offset into .O using nfix (as above) and pfix operators. The
- ** pfix operates in exactly the same way as the nfix operator, but
- ** without the complement operation. The offset, of course, must be
- ** relative to the address of the byte AFTER the branch instruction,
- ** which will be (urm) 0x7FFC, so, our final destination of the branch
- ** (loadbase-2), has to be reached from here. Imagine that the loadbase
- ** is 0x7C00 (which it is), then we will need to branch to 0x7BFE (which
- ** is the first byte of the initial two byte short local branch of the
- ** download code).
- **
- ** To code a jump from 0x7FFC (which is where the branch will start
- ** from) to 0x7BFE, we will need to branch 0xFC02 bytes (0x7FFC+0xFC02)=
- ** 0x7BFE.
- ** This will be coded as four bytes:
- ** 60 2C 20 02
- ** being nfix .O+0
- ** pfix .O+C
- ** pfix .O+0
- ** jump .O+2
- **
- ** The nfix operator is used, so that the startup code will be
- ** compatible with the whole Tp family. (lies, damn lies, it'll never
- ** work in a month of Sundays).
- **
- ** The nfix nyble is the 1s complement of the nyble value you
- ** want to load - in this case we wanted 'F' so we nfix loaded '0'.
- */
-
-
- /*
- ** Dest points to the top 8 bytes of Sram2. The Tp jumps
- ** to 0x7FFE at reset time, and starts executing. This is
- ** a short branch to 0x7FF8, where a long branch is coded.
- */
-
- DestP = &Cad[0x7FF8]; /* <<<---- READ THE ABOVE COMMENTS */
-
-#define NFIX(N) (0x60 | (N)) /* .O = (~(.O + N))<<4 */
-#define PFIX(N) (0x20 | (N)) /* .O = (.O + N)<<4 */
-#define JUMP(N) (0x00 | (N)) /* .PC = .PC + .O */
-
- /*
- ** 0x7FFC is the address of the location following the last byte of
- ** the four byte jump instruction.
- ** READ THE ABOVE COMMENTS
- **
- ** offset is (TO-FROM) % MEMSIZE, but with compound buggering about.
- ** Memsize is 64K for this range of Tp, so offset is a short (unsigned,
- ** cos I don't understand 2's complement).
- */
- offset = (p->RIOConf.HostLoadBase - 2) - 0x7FFC;
-
- writeb(NFIX(((unsigned short) (~offset) >> (unsigned short) 12) & 0xF), DestP);
- writeb(PFIX((offset >> 8) & 0xF), DestP + 1);
- writeb(PFIX((offset >> 4) & 0xF), DestP + 2);
- writeb(JUMP(offset & 0xF), DestP + 3);
-
- writeb(NFIX(0), DestP + 6);
- writeb(JUMP(8), DestP + 7);
-
- rio_dprintk(RIO_DEBUG_BOOT, "host loadbase is 0x%x\n", p->RIOConf.HostLoadBase);
- rio_dprintk(RIO_DEBUG_BOOT, "startup offset is 0x%x\n", offset);
-
- /*
- ** Flag what is going on
- */
- HostP->Flags &= ~RUN_STATE;
- HostP->Flags |= RC_STARTUP;
-
- /*
- ** Grab a copy of the current ParmMap pointer, so we
- ** can tell when it has changed.
- */
- OldParmMap = readw(&HostP->__ParmMapR);
-
- rio_dprintk(RIO_DEBUG_BOOT, "Original parmmap is 0x%x\n", OldParmMap);
-
- /*
- ** And start it running (I hope).
- ** As there is nothing dodgy or obscure about the
- ** above code, this is guaranteed to work every time.
- */
- rio_dprintk(RIO_DEBUG_BOOT, "Host Type = 0x%x, Mode = 0x%x, IVec = 0x%x\n", HostP->Type, HostP->Mode, HostP->Ivec);
-
- rio_start_card_running(HostP);
-
- rio_dprintk(RIO_DEBUG_BOOT, "Set control port\n");
-
- /*
- ** Now, wait for up to five seconds for the Tp to setup the parmmap
- ** pointer:
- */
- for (wait_count = 0; (wait_count < p->RIOConf.StartupTime) && (readw(&HostP->__ParmMapR) == OldParmMap); wait_count++) {
- rio_dprintk(RIO_DEBUG_BOOT, "Checkout %d, 0x%x\n", wait_count, readw(&HostP->__ParmMapR));
- mdelay(100);
-
- }
-
- /*
- ** If the parmmap pointer is unchanged, then the host code
- ** has crashed & burned in a really spectacular way
- */
- if (readw(&HostP->__ParmMapR) == OldParmMap) {
- rio_dprintk(RIO_DEBUG_BOOT, "parmmap 0x%x\n", readw(&HostP->__ParmMapR));
- rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail\n");
- HostP->Flags &= ~RUN_STATE;
- HostP->Flags |= RC_STUFFED;
- RIOHostReset( HostP->Type, HostP->CardP, HostP->Slot );
- continue;
- }
-
- rio_dprintk(RIO_DEBUG_BOOT, "Running 0x%x\n", readw(&HostP->__ParmMapR));
-
- /*
- ** Well, the board thought it was OK, and setup its parmmap
- ** pointer. For the time being, we will pretend that this
- ** board is running, and check out what the error flag says.
- */
-
- /*
- ** Grab a 32 bit pointer to the parmmap structure
- */
- ParmMapP = (PARM_MAP __iomem *) RIO_PTR(Cad, readw(&HostP->__ParmMapR));
- rio_dprintk(RIO_DEBUG_BOOT, "ParmMapP : %p\n", ParmMapP);
- ParmMapP = (PARM_MAP __iomem *)(Cad + readw(&HostP->__ParmMapR));
- rio_dprintk(RIO_DEBUG_BOOT, "ParmMapP : %p\n", ParmMapP);
-
- /*
- ** The links entry should be 0xFFFF; we set it up
- ** with a mask to say how many PHBs to use, and
- ** which links to use.
- */
- if (readw(&ParmMapP->links) != 0xFFFF) {
- rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name);
- rio_dprintk(RIO_DEBUG_BOOT, "Links = 0x%x\n", readw(&ParmMapP->links));
- HostP->Flags &= ~RUN_STATE;
- HostP->Flags |= RC_STUFFED;
- RIOHostReset( HostP->Type, HostP->CardP, HostP->Slot );
- continue;
- }
-
- writew(RIO_LINK_ENABLE, &ParmMapP->links);
-
- /*
- ** now wait for the card to set all the parmmap->XXX stuff
- ** this is a wait of up to two seconds....
- */
- rio_dprintk(RIO_DEBUG_BOOT, "Looking for init_done - %d ticks\n", p->RIOConf.StartupTime);
- HostP->timeout_id = 0;
- for (wait_count = 0; (wait_count < p->RIOConf.StartupTime) && !readw(&ParmMapP->init_done); wait_count++) {
- rio_dprintk(RIO_DEBUG_BOOT, "Waiting for init_done\n");
- mdelay(100);
- }
- rio_dprintk(RIO_DEBUG_BOOT, "OK! init_done!\n");
-
- if (readw(&ParmMapP->error) != E_NO_ERROR || !readw(&ParmMapP->init_done)) {
- rio_dprintk(RIO_DEBUG_BOOT, "RIO Mesg Run Fail %s\n", HostP->Name);
- rio_dprintk(RIO_DEBUG_BOOT, "Timedout waiting for init_done\n");
- HostP->Flags &= ~RUN_STATE;
- HostP->Flags |= RC_STUFFED;
- RIOHostReset( HostP->Type, HostP->CardP, HostP->Slot );
- continue;
- }
-
- rio_dprintk(RIO_DEBUG_BOOT, "Got init_done\n");
-
- /*
- ** It runs! It runs!
- */
- rio_dprintk(RIO_DEBUG_BOOT, "Host ID %x Running\n", HostP->UniqueNum);
-
- /*
- ** set the time period between interrupts.
- */
- writew(p->RIOConf.Timer, &ParmMapP->timer);
-
- /*
- ** Translate all the 16 bit pointers in the __ParmMapR into
- ** 32 bit pointers for the driver in ioremap space.
- */
- HostP->ParmMapP = ParmMapP;
- HostP->PhbP = (struct PHB __iomem *) RIO_PTR(Cad, readw(&ParmMapP->phb_ptr));
- HostP->RupP = (struct RUP __iomem *) RIO_PTR(Cad, readw(&ParmMapP->rups));
- HostP->PhbNumP = (unsigned short __iomem *) RIO_PTR(Cad, readw(&ParmMapP->phb_num_ptr));
- HostP->LinkStrP = (struct LPB __iomem *) RIO_PTR(Cad, readw(&ParmMapP->link_str_ptr));
-
- /*
- ** point the UnixRups at the real Rups
- */
- for (RupN = 0; RupN < MAX_RUP; RupN++) {
- HostP->UnixRups[RupN].RupP = &HostP->RupP[RupN];
- HostP->UnixRups[RupN].Id = RupN + 1;
- HostP->UnixRups[RupN].BaseSysPort = NO_PORT;
- spin_lock_init(&HostP->UnixRups[RupN].RupLock);
- }
-
- for (RupN = 0; RupN < LINKS_PER_UNIT; RupN++) {
- HostP->UnixRups[RupN + MAX_RUP].RupP = &HostP->LinkStrP[RupN].rup;
- HostP->UnixRups[RupN + MAX_RUP].Id = 0;
- HostP->UnixRups[RupN + MAX_RUP].BaseSysPort = NO_PORT;
- spin_lock_init(&HostP->UnixRups[RupN + MAX_RUP].RupLock);
- }
-
- /*
- ** point the PortP->Phbs at the real Phbs
- */
- for (PortN = p->RIOFirstPortsMapped; PortN < p->RIOLastPortsMapped + PORTS_PER_RTA; PortN++) {
- if (p->RIOPortp[PortN]->HostP == HostP) {
- struct Port *PortP = p->RIOPortp[PortN];
- struct PHB __iomem *PhbP;
- /* int oldspl; */
-
- if (!PortP->Mapped)
- continue;
-
- PhbP = &HostP->PhbP[PortP->HostPort];
- rio_spin_lock_irqsave(&PortP->portSem, flags);
-
- PortP->PhbP = PhbP;
-
- PortP->TxAdd = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->tx_add));
- PortP->TxStart = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->tx_start));
- PortP->TxEnd = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->tx_end));
- PortP->RxRemove = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->rx_remove));
- PortP->RxStart = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->rx_start));
- PortP->RxEnd = (u16 __iomem *) RIO_PTR(Cad, readw(&PhbP->rx_end));
-
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- /*
- ** point the UnixRup at the base SysPort
- */
- if (!(PortN % PORTS_PER_RTA))
- HostP->UnixRups[PortP->RupNum].BaseSysPort = PortN;
- }
- }
-
- rio_dprintk(RIO_DEBUG_BOOT, "Set the card running... \n");
- /*
- ** last thing - show the world that everything is in place
- */
- HostP->Flags &= ~RUN_STATE;
- HostP->Flags |= RC_RUNNING;
- }
- /*
- ** MPX always uses a poller. This is actually patched into the system
- ** configuration and called directly from each clock tick.
- **
- */
- p->RIOPolling = 1;
-
- p->RIOSystemUp++;
-
- rio_dprintk(RIO_DEBUG_BOOT, "Done everything %x\n", HostP->Ivec);
- func_exit();
- return 0;
-}
-
-
-
-/**
- * RIOBootRup - Boot an RTA
- * @p: rio we are working with
- * @Rup: Rup number
- * @HostP: host object
- * @PacketP: packet to use
- *
- * If we have successfully processed this boot, then
- * return 1. If we havent, then return 0.
- */
-
-int RIOBootRup(struct rio_info *p, unsigned int Rup, struct Host *HostP, struct PKT __iomem *PacketP)
-{
- struct PktCmd __iomem *PktCmdP = (struct PktCmd __iomem *) PacketP->data;
- struct PktCmd_M *PktReplyP;
- struct CmdBlk *CmdBlkP;
- unsigned int sequence;
-
- /*
- ** If we haven't been told what to boot, we can't boot it.
- */
- if (p->RIONumBootPkts == 0) {
- rio_dprintk(RIO_DEBUG_BOOT, "No RTA code to download yet\n");
- return 0;
- }
-
- /*
- ** Special case of boot completed - if we get one of these then we
- ** don't need a command block. For all other cases we do, so handle
- ** this first and then get a command block, then handle every other
- ** case, relinquishing the command block if disaster strikes!
- */
- if ((readb(&PacketP->len) & PKT_CMD_BIT) && (readb(&PktCmdP->Command) == BOOT_COMPLETED))
- return RIOBootComplete(p, HostP, Rup, PktCmdP);
-
- /*
- ** Try to allocate a command block. This is in kernel space
- */
- if (!(CmdBlkP = RIOGetCmdBlk())) {
- rio_dprintk(RIO_DEBUG_BOOT, "No command blocks to boot RTA! come back later.\n");
- return 0;
- }
-
- /*
- ** Fill in the default info on the command block
- */
- CmdBlkP->Packet.dest_unit = Rup < (unsigned short) MAX_RUP ? Rup : 0;
- CmdBlkP->Packet.dest_port = BOOT_RUP;
- CmdBlkP->Packet.src_unit = 0;
- CmdBlkP->Packet.src_port = BOOT_RUP;
-
- CmdBlkP->PreFuncP = CmdBlkP->PostFuncP = NULL;
- PktReplyP = (struct PktCmd_M *) CmdBlkP->Packet.data;
-
- /*
- ** process COMMANDS on the boot rup!
- */
- if (readb(&PacketP->len) & PKT_CMD_BIT) {
- /*
- ** We only expect one type of command - a BOOT_REQUEST!
- */
- if (readb(&PktCmdP->Command) != BOOT_REQUEST) {
- rio_dprintk(RIO_DEBUG_BOOT, "Unexpected command %d on BOOT RUP %d of host %Zd\n", readb(&PktCmdP->Command), Rup, HostP - p->RIOHosts);
- RIOFreeCmdBlk(CmdBlkP);
- return 1;
- }
-
- /*
- ** Build a Boot Sequence command block
- **
- ** We no longer need to use "Boot Mode", we'll always allow
- ** boot requests - the boot will not complete if the device
- ** appears in the bindings table.
- **
- ** We'll just (always) set the command field in packet reply
- ** to allow an attempted boot sequence :
- */
- PktReplyP->Command = BOOT_SEQUENCE;
-
- PktReplyP->BootSequence.NumPackets = p->RIONumBootPkts;
- PktReplyP->BootSequence.LoadBase = p->RIOConf.RtaLoadBase;
- PktReplyP->BootSequence.CodeSize = p->RIOBootCount;
-
- CmdBlkP->Packet.len = BOOT_SEQUENCE_LEN | PKT_CMD_BIT;
-
- memcpy((void *) &CmdBlkP->Packet.data[BOOT_SEQUENCE_LEN], "BOOT", 4);
-
- rio_dprintk(RIO_DEBUG_BOOT, "Boot RTA on Host %Zd Rup %d - %d (0x%x) packets to 0x%x\n", HostP - p->RIOHosts, Rup, p->RIONumBootPkts, p->RIONumBootPkts, p->RIOConf.RtaLoadBase);
-
- /*
- ** If this host is in slave mode, send the RTA an invalid boot
- ** sequence command block to force it to kill the boot. We wait
- ** for half a second before sending this packet to prevent the RTA
- ** attempting to boot too often. The master host should then grab
- ** the RTA and make it its own.
- */
- p->RIOBooting++;
- RIOQueueCmdBlk(HostP, Rup, CmdBlkP);
- return 1;
- }
-
- /*
- ** It is a request for boot data.
- */
- sequence = readw(&PktCmdP->Sequence);
-
- rio_dprintk(RIO_DEBUG_BOOT, "Boot block %d on Host %Zd Rup%d\n", sequence, HostP - p->RIOHosts, Rup);
-
- if (sequence >= p->RIONumBootPkts) {
- rio_dprintk(RIO_DEBUG_BOOT, "Got a request for packet %d, max is %d\n", sequence, p->RIONumBootPkts);
- }
-
- PktReplyP->Sequence = sequence;
- memcpy(PktReplyP->BootData, p->RIOBootPackets[p->RIONumBootPkts - sequence - 1], RTA_BOOT_DATA_SIZE);
- CmdBlkP->Packet.len = PKT_MAX_DATA_LEN;
- RIOQueueCmdBlk(HostP, Rup, CmdBlkP);
- return 1;
-}
-
-/**
- * RIOBootComplete - RTA boot is done
- * @p: RIO we are working with
- * @HostP: Host structure
- * @Rup: RUP being used
- * @PktCmdP: Packet command that was used
- *
- * This function is called when an RTA been booted.
- * If booted by a host, HostP->HostUniqueNum is the booting host.
- * If booted by an RTA, HostP->Mapping[Rup].RtaUniqueNum is the booting RTA.
- * RtaUniq is the booted RTA.
- */
-
-static int RIOBootComplete(struct rio_info *p, struct Host *HostP, unsigned int Rup, struct PktCmd __iomem *PktCmdP)
-{
- struct Map *MapP = NULL;
- struct Map *MapP2 = NULL;
- int Flag;
- int found;
- int host, rta;
- int EmptySlot = -1;
- int entry, entry2;
- char *MyType, *MyName;
- unsigned int MyLink;
- unsigned short RtaType;
- u32 RtaUniq = (readb(&PktCmdP->UniqNum[0])) + (readb(&PktCmdP->UniqNum[1]) << 8) + (readb(&PktCmdP->UniqNum[2]) << 16) + (readb(&PktCmdP->UniqNum[3]) << 24);
-
- p->RIOBooting = 0;
-
- rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot completed - BootInProgress now %d\n", p->RIOBooting);
-
- /*
- ** Determine type of unit (16/8 port RTA).
- */
-
- RtaType = GetUnitType(RtaUniq);
- if (Rup >= (unsigned short) MAX_RUP)
- rio_dprintk(RIO_DEBUG_BOOT, "RIO: Host %s has booted an RTA(%d) on link %c\n", HostP->Name, 8 * RtaType, readb(&PktCmdP->LinkNum) + 'A');
- else
- rio_dprintk(RIO_DEBUG_BOOT, "RIO: RTA %s has booted an RTA(%d) on link %c\n", HostP->Mapping[Rup].Name, 8 * RtaType, readb(&PktCmdP->LinkNum) + 'A');
-
- rio_dprintk(RIO_DEBUG_BOOT, "UniqNum is 0x%x\n", RtaUniq);
-
- if (RtaUniq == 0x00000000 || RtaUniq == 0xffffffff) {
- rio_dprintk(RIO_DEBUG_BOOT, "Illegal RTA Uniq Number\n");
- return 1;
- }
-
- /*
- ** If this RTA has just booted an RTA which doesn't belong to this
- ** system, or the system is in slave mode, do not attempt to create
- ** a new table entry for it.
- */
-
- if (!RIOBootOk(p, HostP, RtaUniq)) {
- MyLink = readb(&PktCmdP->LinkNum);
- if (Rup < (unsigned short) MAX_RUP) {
- /*
- ** RtaUniq was clone booted (by this RTA). Instruct this RTA
- ** to hold off further attempts to boot on this link for 30
- ** seconds.
- */
- if (RIOSuspendBootRta(HostP, HostP->Mapping[Rup].ID, MyLink)) {
- rio_dprintk(RIO_DEBUG_BOOT, "RTA failed to suspend booting on link %c\n", 'A' + MyLink);
- }
- } else
- /*
- ** RtaUniq was booted by this host. Set the booting link
- ** to hold off for 30 seconds to give another unit a
- ** chance to boot it.
- */
- writew(30, &HostP->LinkStrP[MyLink].WaitNoBoot);
- rio_dprintk(RIO_DEBUG_BOOT, "RTA %x not owned - suspend booting down link %c on unit %x\n", RtaUniq, 'A' + MyLink, HostP->Mapping[Rup].RtaUniqueNum);
- return 1;
- }
-
- /*
- ** Check for a SLOT_IN_USE entry for this RTA attached to the
- ** current host card in the driver table.
- **
- ** If it exists, make a note that we have booted it. Other parts of
- ** the driver are interested in this information at a later date,
- ** in particular when the booting RTA asks for an ID for this unit,
- ** we must have set the BOOTED flag, and the NEWBOOT flag is used
- ** to force an open on any ports that where previously open on this
- ** unit.
- */
- for (entry = 0; entry < MAX_RUP; entry++) {
- unsigned int sysport;
-
- if ((HostP->Mapping[entry].Flags & SLOT_IN_USE) && (HostP->Mapping[entry].RtaUniqueNum == RtaUniq)) {
- HostP->Mapping[entry].Flags |= RTA_BOOTED | RTA_NEWBOOT;
- if ((sysport = HostP->Mapping[entry].SysPort) != NO_PORT) {
- if (sysport < p->RIOFirstPortsBooted)
- p->RIOFirstPortsBooted = sysport;
- if (sysport > p->RIOLastPortsBooted)
- p->RIOLastPortsBooted = sysport;
- /*
- ** For a 16 port RTA, check the second bank of 8 ports
- */
- if (RtaType == TYPE_RTA16) {
- entry2 = HostP->Mapping[entry].ID2 - 1;
- HostP->Mapping[entry2].Flags |= RTA_BOOTED | RTA_NEWBOOT;
- sysport = HostP->Mapping[entry2].SysPort;
- if (sysport < p->RIOFirstPortsBooted)
- p->RIOFirstPortsBooted = sysport;
- if (sysport > p->RIOLastPortsBooted)
- p->RIOLastPortsBooted = sysport;
- }
- }
- if (RtaType == TYPE_RTA16)
- rio_dprintk(RIO_DEBUG_BOOT, "RTA will be given IDs %d+%d\n", entry + 1, entry2 + 1);
- else
- rio_dprintk(RIO_DEBUG_BOOT, "RTA will be given ID %d\n", entry + 1);
- return 1;
- }
- }
-
- rio_dprintk(RIO_DEBUG_BOOT, "RTA not configured for this host\n");
-
- if (Rup >= (unsigned short) MAX_RUP) {
- /*
- ** It was a host that did the booting
- */
- MyType = "Host";
- MyName = HostP->Name;
- } else {
- /*
- ** It was an RTA that did the booting
- */
- MyType = "RTA";
- MyName = HostP->Mapping[Rup].Name;
- }
- MyLink = readb(&PktCmdP->LinkNum);
-
- /*
- ** There is no SLOT_IN_USE entry for this RTA attached to the current
- ** host card in the driver table.
- **
- ** Check for a SLOT_TENTATIVE entry for this RTA attached to the
- ** current host card in the driver table.
- **
- ** If we find one, then we re-use that slot.
- */
- for (entry = 0; entry < MAX_RUP; entry++) {
- if ((HostP->Mapping[entry].Flags & SLOT_TENTATIVE) && (HostP->Mapping[entry].RtaUniqueNum == RtaUniq)) {
- if (RtaType == TYPE_RTA16) {
- entry2 = HostP->Mapping[entry].ID2 - 1;
- if ((HostP->Mapping[entry2].Flags & SLOT_TENTATIVE) && (HostP->Mapping[entry2].RtaUniqueNum == RtaUniq))
- rio_dprintk(RIO_DEBUG_BOOT, "Found previous tentative slots (%d+%d)\n", entry, entry2);
- else
- continue;
- } else
- rio_dprintk(RIO_DEBUG_BOOT, "Found previous tentative slot (%d)\n", entry);
- if (!p->RIONoMessage)
- printk("RTA connected to %s '%s' (%c) not configured.\n", MyType, MyName, MyLink + 'A');
- return 1;
- }
- }
-
- /*
- ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
- ** attached to the current host card in the driver table.
- **
- ** Check if there is a SLOT_IN_USE or SLOT_TENTATIVE entry on another
- ** host for this RTA in the driver table.
- **
- ** For a SLOT_IN_USE entry on another host, we need to delete the RTA
- ** entry from the other host and add it to this host (using some of
- ** the functions from table.c which do this).
- ** For a SLOT_TENTATIVE entry on another host, we must cope with the
- ** following scenario:
- **
- ** + Plug 8 port RTA into host A. (This creates SLOT_TENTATIVE entry
- ** in table)
- ** + Unplug RTA and plug into host B. (We now have 2 SLOT_TENTATIVE
- ** entries)
- ** + Configure RTA on host B. (This slot now becomes SLOT_IN_USE)
- ** + Unplug RTA and plug back into host A.
- ** + Configure RTA on host A. We now have the same RTA configured
- ** with different ports on two different hosts.
- */
- rio_dprintk(RIO_DEBUG_BOOT, "Have we seen RTA %x before?\n", RtaUniq);
- found = 0;
- Flag = 0; /* Convince the compiler this variable is initialized */
- for (host = 0; !found && (host < p->RIONumHosts); host++) {
- for (rta = 0; rta < MAX_RUP; rta++) {
- if ((p->RIOHosts[host].Mapping[rta].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) && (p->RIOHosts[host].Mapping[rta].RtaUniqueNum == RtaUniq)) {
- Flag = p->RIOHosts[host].Mapping[rta].Flags;
- MapP = &p->RIOHosts[host].Mapping[rta];
- if (RtaType == TYPE_RTA16) {
- MapP2 = &p->RIOHosts[host].Mapping[MapP->ID2 - 1];
- rio_dprintk(RIO_DEBUG_BOOT, "This RTA is units %d+%d from host %s\n", rta + 1, MapP->ID2, p->RIOHosts[host].Name);
- } else
- rio_dprintk(RIO_DEBUG_BOOT, "This RTA is unit %d from host %s\n", rta + 1, p->RIOHosts[host].Name);
- found = 1;
- break;
- }
- }
- }
-
- /*
- ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
- ** attached to the current host card in the driver table.
- **
- ** If we have not found a SLOT_IN_USE or SLOT_TENTATIVE entry on
- ** another host for this RTA in the driver table...
- **
- ** Check for a SLOT_IN_USE entry for this RTA in the config table.
- */
- if (!MapP) {
- rio_dprintk(RIO_DEBUG_BOOT, "Look for RTA %x in RIOSavedTable\n", RtaUniq);
- for (rta = 0; rta < TOTAL_MAP_ENTRIES; rta++) {
- rio_dprintk(RIO_DEBUG_BOOT, "Check table entry %d (%x)", rta, p->RIOSavedTable[rta].RtaUniqueNum);
-
- if ((p->RIOSavedTable[rta].Flags & SLOT_IN_USE) && (p->RIOSavedTable[rta].RtaUniqueNum == RtaUniq)) {
- MapP = &p->RIOSavedTable[rta];
- Flag = p->RIOSavedTable[rta].Flags;
- if (RtaType == TYPE_RTA16) {
- for (entry2 = rta + 1; entry2 < TOTAL_MAP_ENTRIES; entry2++) {
- if (p->RIOSavedTable[entry2].RtaUniqueNum == RtaUniq)
- break;
- }
- MapP2 = &p->RIOSavedTable[entry2];
- rio_dprintk(RIO_DEBUG_BOOT, "This RTA is from table entries %d+%d\n", rta, entry2);
- } else
- rio_dprintk(RIO_DEBUG_BOOT, "This RTA is from table entry %d\n", rta);
- break;
- }
- }
- }
-
- /*
- ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
- ** attached to the current host card in the driver table.
- **
- ** We may have found a SLOT_IN_USE entry on another host for this
- ** RTA in the config table, or a SLOT_IN_USE or SLOT_TENTATIVE entry
- ** on another host for this RTA in the driver table.
- **
- ** Check the driver table for room to fit this newly discovered RTA.
- ** RIOFindFreeID() first looks for free slots and if it does not
- ** find any free slots it will then attempt to oust any
- ** tentative entry in the table.
- */
- EmptySlot = 1;
- if (RtaType == TYPE_RTA16) {
- if (RIOFindFreeID(p, HostP, &entry, &entry2) == 0) {
- RIODefaultName(p, HostP, entry);
- rio_fill_host_slot(entry, entry2, RtaUniq, HostP);
- EmptySlot = 0;
- }
- } else {
- if (RIOFindFreeID(p, HostP, &entry, NULL) == 0) {
- RIODefaultName(p, HostP, entry);
- rio_fill_host_slot(entry, 0, RtaUniq, HostP);
- EmptySlot = 0;
- }
- }
-
- /*
- ** There is no SLOT_IN_USE or SLOT_TENTATIVE entry for this RTA
- ** attached to the current host card in the driver table.
- **
- ** If we found a SLOT_IN_USE entry on another host for this
- ** RTA in the config or driver table, and there are enough free
- ** slots in the driver table, then we need to move it over and
- ** delete it from the other host.
- ** If we found a SLOT_TENTATIVE entry on another host for this
- ** RTA in the driver table, just delete the other host entry.
- */
- if (EmptySlot == 0) {
- if (MapP) {
- if (Flag & SLOT_IN_USE) {
- rio_dprintk(RIO_DEBUG_BOOT, "This RTA configured on another host - move entry to current host (1)\n");
- HostP->Mapping[entry].SysPort = MapP->SysPort;
- memcpy(HostP->Mapping[entry].Name, MapP->Name, MAX_NAME_LEN);
- HostP->Mapping[entry].Flags = SLOT_IN_USE | RTA_BOOTED | RTA_NEWBOOT;
- RIOReMapPorts(p, HostP, &HostP->Mapping[entry]);
- if (HostP->Mapping[entry].SysPort < p->RIOFirstPortsBooted)
- p->RIOFirstPortsBooted = HostP->Mapping[entry].SysPort;
- if (HostP->Mapping[entry].SysPort > p->RIOLastPortsBooted)
- p->RIOLastPortsBooted = HostP->Mapping[entry].SysPort;
- rio_dprintk(RIO_DEBUG_BOOT, "SysPort %d, Name %s\n", (int) MapP->SysPort, MapP->Name);
- } else {
- rio_dprintk(RIO_DEBUG_BOOT, "This RTA has a tentative entry on another host - delete that entry (1)\n");
- HostP->Mapping[entry].Flags = SLOT_TENTATIVE | RTA_BOOTED | RTA_NEWBOOT;
- }
- if (RtaType == TYPE_RTA16) {
- if (Flag & SLOT_IN_USE) {
- HostP->Mapping[entry2].Flags = SLOT_IN_USE | RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT;
- HostP->Mapping[entry2].SysPort = MapP2->SysPort;
- /*
- ** Map second block of ttys for 16 port RTA
- */
- RIOReMapPorts(p, HostP, &HostP->Mapping[entry2]);
- if (HostP->Mapping[entry2].SysPort < p->RIOFirstPortsBooted)
- p->RIOFirstPortsBooted = HostP->Mapping[entry2].SysPort;
- if (HostP->Mapping[entry2].SysPort > p->RIOLastPortsBooted)
- p->RIOLastPortsBooted = HostP->Mapping[entry2].SysPort;
- rio_dprintk(RIO_DEBUG_BOOT, "SysPort %d, Name %s\n", (int) HostP->Mapping[entry2].SysPort, HostP->Mapping[entry].Name);
- } else
- HostP->Mapping[entry2].Flags = SLOT_TENTATIVE | RTA_BOOTED | RTA_NEWBOOT | RTA16_SECOND_SLOT;
- memset(MapP2, 0, sizeof(struct Map));
- }
- memset(MapP, 0, sizeof(struct Map));
- if (!p->RIONoMessage)
- printk("An orphaned RTA has been adopted by %s '%s' (%c).\n", MyType, MyName, MyLink + 'A');
- } else if (!p->RIONoMessage)
- printk("RTA connected to %s '%s' (%c) not configured.\n", MyType, MyName, MyLink + 'A');
- RIOSetChange(p);
- return 1;
- }
-
- /*
- ** There is no room in the driver table to make an entry for the
- ** booted RTA. Keep a note of its Uniq Num in the overflow table,
- ** so we can ignore it's ID requests.
- */
- if (!p->RIONoMessage)
- printk("The RTA connected to %s '%s' (%c) cannot be configured. You cannot configure more than 128 ports to one host card.\n", MyType, MyName, MyLink + 'A');
- for (entry = 0; entry < HostP->NumExtraBooted; entry++) {
- if (HostP->ExtraUnits[entry] == RtaUniq) {
- /*
- ** already got it!
- */
- return 1;
- }
- }
- /*
- ** If there is room, add the unit to the list of extras
- */
- if (HostP->NumExtraBooted < MAX_EXTRA_UNITS)
- HostP->ExtraUnits[HostP->NumExtraBooted++] = RtaUniq;
- return 1;
-}
-
-
-/*
-** If the RTA or its host appears in the RIOBindTab[] structure then
-** we mustn't boot the RTA and should return 0.
-** This operation is slightly different from the other drivers for RIO
-** in that this is designed to work with the new utilities
-** not config.rio and is FAR SIMPLER.
-** We no longer support the RIOBootMode variable. It is all done from the
-** "boot/noboot" field in the rio.cf file.
-*/
-int RIOBootOk(struct rio_info *p, struct Host *HostP, unsigned long RtaUniq)
-{
- int Entry;
- unsigned int HostUniq = HostP->UniqueNum;
-
- /*
- ** Search bindings table for RTA or its parent.
- ** If it exists, return 0, else 1.
- */
- for (Entry = 0; (Entry < MAX_RTA_BINDINGS) && (p->RIOBindTab[Entry] != 0); Entry++) {
- if ((p->RIOBindTab[Entry] == HostUniq) || (p->RIOBindTab[Entry] == RtaUniq))
- return 0;
- }
- return 1;
-}
-
-/*
-** Make an empty slot tentative. If this is a 16 port RTA, make both
-** slots tentative, and the second one RTA_SECOND_SLOT as well.
-*/
-
-void rio_fill_host_slot(int entry, int entry2, unsigned int rta_uniq, struct Host *host)
-{
- int link;
-
- rio_dprintk(RIO_DEBUG_BOOT, "rio_fill_host_slot(%d, %d, 0x%x...)\n", entry, entry2, rta_uniq);
-
- host->Mapping[entry].Flags = (RTA_BOOTED | RTA_NEWBOOT | SLOT_TENTATIVE);
- host->Mapping[entry].SysPort = NO_PORT;
- host->Mapping[entry].RtaUniqueNum = rta_uniq;
- host->Mapping[entry].HostUniqueNum = host->UniqueNum;
- host->Mapping[entry].ID = entry + 1;
- host->Mapping[entry].ID2 = 0;
- if (entry2) {
- host->Mapping[entry2].Flags = (RTA_BOOTED | RTA_NEWBOOT | SLOT_TENTATIVE | RTA16_SECOND_SLOT);
- host->Mapping[entry2].SysPort = NO_PORT;
- host->Mapping[entry2].RtaUniqueNum = rta_uniq;
- host->Mapping[entry2].HostUniqueNum = host->UniqueNum;
- host->Mapping[entry2].Name[0] = '\0';
- host->Mapping[entry2].ID = entry2 + 1;
- host->Mapping[entry2].ID2 = entry + 1;
- host->Mapping[entry].ID2 = entry2 + 1;
- }
- /*
- ** Must set these up, so that utilities show
- ** topology of 16 port RTAs correctly
- */
- for (link = 0; link < LINKS_PER_UNIT; link++) {
- host->Mapping[entry].Topology[link].Unit = ROUTE_DISCONNECT;
- host->Mapping[entry].Topology[link].Link = NO_LINK;
- if (entry2) {
- host->Mapping[entry2].Topology[link].Unit = ROUTE_DISCONNECT;
- host->Mapping[entry2].Topology[link].Link = NO_LINK;
- }
- }
-}
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** ported from the existing SCO driver source
-**
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : riocmd.c
-** SID : 1.2
-** Last Modified : 11/6/98 10:33:41
-** Retrieved : 11/6/98 10:33:49
-**
-** ident @(#)riocmd.c 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-
-#include <linux/termios.h>
-#include <linux/serial.h>
-
-#include <linux/generic_serial.h>
-
-#include "linux_compat.h"
-#include "rio_linux.h"
-#include "pkt.h"
-#include "daemon.h"
-#include "rio.h"
-#include "riospace.h"
-#include "cmdpkt.h"
-#include "map.h"
-#include "rup.h"
-#include "port.h"
-#include "riodrvr.h"
-#include "rioinfo.h"
-#include "func.h"
-#include "errors.h"
-#include "pci.h"
-
-#include "parmmap.h"
-#include "unixrup.h"
-#include "board.h"
-#include "host.h"
-#include "phb.h"
-#include "link.h"
-#include "cmdblk.h"
-#include "route.h"
-#include "cirrus.h"
-
-
-static struct IdentifyRta IdRta;
-static struct KillNeighbour KillUnit;
-
-int RIOFoadRta(struct Host *HostP, struct Map *MapP)
-{
- struct CmdBlk *CmdBlkP;
-
- rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA\n");
-
- CmdBlkP = RIOGetCmdBlk();
-
- if (!CmdBlkP) {
- rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA: GetCmdBlk failed\n");
- return -ENXIO;
- }
-
- CmdBlkP->Packet.dest_unit = MapP->ID;
- CmdBlkP->Packet.dest_port = BOOT_RUP;
- CmdBlkP->Packet.src_unit = 0;
- CmdBlkP->Packet.src_port = BOOT_RUP;
- CmdBlkP->Packet.len = 0x84;
- CmdBlkP->Packet.data[0] = IFOAD;
- CmdBlkP->Packet.data[1] = 0;
- CmdBlkP->Packet.data[2] = IFOAD_MAGIC & 0xFF;
- CmdBlkP->Packet.data[3] = (IFOAD_MAGIC >> 8) & 0xFF;
-
- if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA: Failed to queue foad command\n");
- return -EIO;
- }
- return 0;
-}
-
-int RIOZombieRta(struct Host *HostP, struct Map *MapP)
-{
- struct CmdBlk *CmdBlkP;
-
- rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA\n");
-
- CmdBlkP = RIOGetCmdBlk();
-
- if (!CmdBlkP) {
- rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA: GetCmdBlk failed\n");
- return -ENXIO;
- }
-
- CmdBlkP->Packet.dest_unit = MapP->ID;
- CmdBlkP->Packet.dest_port = BOOT_RUP;
- CmdBlkP->Packet.src_unit = 0;
- CmdBlkP->Packet.src_port = BOOT_RUP;
- CmdBlkP->Packet.len = 0x84;
- CmdBlkP->Packet.data[0] = ZOMBIE;
- CmdBlkP->Packet.data[1] = 0;
- CmdBlkP->Packet.data[2] = ZOMBIE_MAGIC & 0xFF;
- CmdBlkP->Packet.data[3] = (ZOMBIE_MAGIC >> 8) & 0xFF;
-
- if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA: Failed to queue zombie command\n");
- return -EIO;
- }
- return 0;
-}
-
-int RIOCommandRta(struct rio_info *p, unsigned long RtaUnique, int (*func) (struct Host * HostP, struct Map * MapP))
-{
- unsigned int Host;
-
- rio_dprintk(RIO_DEBUG_CMD, "Command RTA 0x%lx func %p\n", RtaUnique, func);
-
- if (!RtaUnique)
- return (0);
-
- for (Host = 0; Host < p->RIONumHosts; Host++) {
- unsigned int Rta;
- struct Host *HostP = &p->RIOHosts[Host];
-
- for (Rta = 0; Rta < RTAS_PER_HOST; Rta++) {
- struct Map *MapP = &HostP->Mapping[Rta];
-
- if (MapP->RtaUniqueNum == RtaUnique) {
- uint Link;
-
- /*
- ** now, lets just check we have a route to it...
- ** IF the routing stuff is working, then one of the
- ** topology entries for this unit will have a legit
- ** route *somewhere*. We care not where - if its got
- ** any connections, we can get to it.
- */
- for (Link = 0; Link < LINKS_PER_UNIT; Link++) {
- if (MapP->Topology[Link].Unit <= (u8) MAX_RUP) {
- /*
- ** Its worth trying the operation...
- */
- return (*func) (HostP, MapP);
- }
- }
- }
- }
- }
- return -ENXIO;
-}
-
-
-int RIOIdentifyRta(struct rio_info *p, void __user * arg)
-{
- unsigned int Host;
-
- if (copy_from_user(&IdRta, arg, sizeof(IdRta))) {
- rio_dprintk(RIO_DEBUG_CMD, "RIO_IDENTIFY_RTA copy failed\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
-
- for (Host = 0; Host < p->RIONumHosts; Host++) {
- unsigned int Rta;
- struct Host *HostP = &p->RIOHosts[Host];
-
- for (Rta = 0; Rta < RTAS_PER_HOST; Rta++) {
- struct Map *MapP = &HostP->Mapping[Rta];
-
- if (MapP->RtaUniqueNum == IdRta.RtaUnique) {
- uint Link;
- /*
- ** now, lets just check we have a route to it...
- ** IF the routing stuff is working, then one of the
- ** topology entries for this unit will have a legit
- ** route *somewhere*. We care not where - if its got
- ** any connections, we can get to it.
- */
- for (Link = 0; Link < LINKS_PER_UNIT; Link++) {
- if (MapP->Topology[Link].Unit <= (u8) MAX_RUP) {
- /*
- ** Its worth trying the operation...
- */
- struct CmdBlk *CmdBlkP;
-
- rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA\n");
-
- CmdBlkP = RIOGetCmdBlk();
-
- if (!CmdBlkP) {
- rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA: GetCmdBlk failed\n");
- return -ENXIO;
- }
-
- CmdBlkP->Packet.dest_unit = MapP->ID;
- CmdBlkP->Packet.dest_port = BOOT_RUP;
- CmdBlkP->Packet.src_unit = 0;
- CmdBlkP->Packet.src_port = BOOT_RUP;
- CmdBlkP->Packet.len = 0x84;
- CmdBlkP->Packet.data[0] = IDENTIFY;
- CmdBlkP->Packet.data[1] = 0;
- CmdBlkP->Packet.data[2] = IdRta.ID;
-
- if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA: Failed to queue command\n");
- return -EIO;
- }
- return 0;
- }
- }
- }
- }
- }
- return -ENOENT;
-}
-
-
-int RIOKillNeighbour(struct rio_info *p, void __user * arg)
-{
- uint Host;
- uint ID;
- struct Host *HostP;
- struct CmdBlk *CmdBlkP;
-
- rio_dprintk(RIO_DEBUG_CMD, "KILL HOST NEIGHBOUR\n");
-
- if (copy_from_user(&KillUnit, arg, sizeof(KillUnit))) {
- rio_dprintk(RIO_DEBUG_CMD, "RIO_KILL_NEIGHBOUR copy failed\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
-
- if (KillUnit.Link > 3)
- return -ENXIO;
-
- CmdBlkP = RIOGetCmdBlk();
-
- if (!CmdBlkP) {
- rio_dprintk(RIO_DEBUG_CMD, "UFOAD: GetCmdBlk failed\n");
- return -ENXIO;
- }
-
- CmdBlkP->Packet.dest_unit = 0;
- CmdBlkP->Packet.src_unit = 0;
- CmdBlkP->Packet.dest_port = BOOT_RUP;
- CmdBlkP->Packet.src_port = BOOT_RUP;
- CmdBlkP->Packet.len = 0x84;
- CmdBlkP->Packet.data[0] = UFOAD;
- CmdBlkP->Packet.data[1] = KillUnit.Link;
- CmdBlkP->Packet.data[2] = UFOAD_MAGIC & 0xFF;
- CmdBlkP->Packet.data[3] = (UFOAD_MAGIC >> 8) & 0xFF;
-
- for (Host = 0; Host < p->RIONumHosts; Host++) {
- ID = 0;
- HostP = &p->RIOHosts[Host];
-
- if (HostP->UniqueNum == KillUnit.UniqueNum) {
- if (RIOQueueCmdBlk(HostP, RTAS_PER_HOST + KillUnit.Link, CmdBlkP) == RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_CMD, "UFOAD: Failed queue command\n");
- return -EIO;
- }
- return 0;
- }
-
- for (ID = 0; ID < RTAS_PER_HOST; ID++) {
- if (HostP->Mapping[ID].RtaUniqueNum == KillUnit.UniqueNum) {
- CmdBlkP->Packet.dest_unit = ID + 1;
- if (RIOQueueCmdBlk(HostP, ID, CmdBlkP) == RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_CMD, "UFOAD: Failed queue command\n");
- return -EIO;
- }
- return 0;
- }
- }
- }
- RIOFreeCmdBlk(CmdBlkP);
- return -ENXIO;
-}
-
-int RIOSuspendBootRta(struct Host *HostP, int ID, int Link)
-{
- struct CmdBlk *CmdBlkP;
-
- rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA ID %d, link %c\n", ID, 'A' + Link);
-
- CmdBlkP = RIOGetCmdBlk();
-
- if (!CmdBlkP) {
- rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA: GetCmdBlk failed\n");
- return -ENXIO;
- }
-
- CmdBlkP->Packet.dest_unit = ID;
- CmdBlkP->Packet.dest_port = BOOT_RUP;
- CmdBlkP->Packet.src_unit = 0;
- CmdBlkP->Packet.src_port = BOOT_RUP;
- CmdBlkP->Packet.len = 0x84;
- CmdBlkP->Packet.data[0] = IWAIT;
- CmdBlkP->Packet.data[1] = Link;
- CmdBlkP->Packet.data[2] = IWAIT_MAGIC & 0xFF;
- CmdBlkP->Packet.data[3] = (IWAIT_MAGIC >> 8) & 0xFF;
-
- if (RIOQueueCmdBlk(HostP, ID - 1, CmdBlkP) == RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA: Failed to queue iwait command\n");
- return -EIO;
- }
- return 0;
-}
-
-int RIOFoadWakeup(struct rio_info *p)
-{
- int port;
- struct Port *PortP;
- unsigned long flags;
-
- for (port = 0; port < RIO_PORTS; port++) {
- PortP = p->RIOPortp[port];
-
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- PortP->Config = 0;
- PortP->State = 0;
- PortP->InUse = NOT_INUSE;
- PortP->PortState = 0;
- PortP->FlushCmdBodge = 0;
- PortP->ModemLines = 0;
- PortP->ModemState = 0;
- PortP->CookMode = 0;
- PortP->ParamSem = 0;
- PortP->Mapped = 0;
- PortP->WflushFlag = 0;
- PortP->MagicFlags = 0;
- PortP->RxDataStart = 0;
- PortP->TxBufferIn = 0;
- PortP->TxBufferOut = 0;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- }
- return (0);
-}
-
-/*
-** Incoming command on the COMMAND_RUP to be processed.
-*/
-static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, struct PKT __iomem *PacketP)
-{
- struct PktCmd __iomem *PktCmdP = (struct PktCmd __iomem *)PacketP->data;
- struct Port *PortP;
- struct UnixRup *UnixRupP;
- unsigned short SysPort;
- unsigned short ReportedModemStatus;
- unsigned short rup;
- unsigned short subCommand;
- unsigned long flags;
-
- func_enter();
-
- /*
- ** 16 port RTA note:
- ** Command rup packets coming from the RTA will have pkt->data[1] (which
- ** translates to PktCmdP->PhbNum) set to the host port number for the
- ** particular unit. To access the correct BaseSysPort for a 16 port RTA,
- ** we can use PhbNum to get the rup number for the appropriate 8 port
- ** block (for the first block, this should be equal to 'Rup').
- */
- rup = readb(&PktCmdP->PhbNum) / (unsigned short) PORTS_PER_RTA;
- UnixRupP = &HostP->UnixRups[rup];
- SysPort = UnixRupP->BaseSysPort + (readb(&PktCmdP->PhbNum) % (unsigned short) PORTS_PER_RTA);
- rio_dprintk(RIO_DEBUG_CMD, "Command on rup %d, port %d\n", rup, SysPort);
-
- if (UnixRupP->BaseSysPort == NO_PORT) {
- rio_dprintk(RIO_DEBUG_CMD, "OBSCURE ERROR!\n");
- rio_dprintk(RIO_DEBUG_CMD, "Diagnostics follow. Please WRITE THESE DOWN and report them to Specialix Technical Support\n");
- rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: Host number %Zd, name ``%s''\n", HostP - p->RIOHosts, HostP->Name);
- rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: Rup number 0x%x\n", rup);
-
- if (Rup < (unsigned short) MAX_RUP) {
- rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: This is the RUP for RTA ``%s''\n", HostP->Mapping[Rup].Name);
- } else
- rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: This is the RUP for link ``%c'' of host ``%s''\n", ('A' + Rup - MAX_RUP), HostP->Name);
-
- rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Destination 0x%x:0x%x\n", readb(&PacketP->dest_unit), readb(&PacketP->dest_port));
- rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Source 0x%x:0x%x\n", readb(&PacketP->src_unit), readb(&PacketP->src_port));
- rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Length 0x%x (%d)\n", readb(&PacketP->len), readb(&PacketP->len));
- rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Control 0x%x (%d)\n", readb(&PacketP->control), readb(&PacketP->control));
- rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Check 0x%x (%d)\n", readw(&PacketP->csum), readw(&PacketP->csum));
- rio_dprintk(RIO_DEBUG_CMD, "COMMAND information: Host Port Number 0x%x, " "Command Code 0x%x\n", readb(&PktCmdP->PhbNum), readb(&PktCmdP->Command));
- return 1;
- }
- PortP = p->RIOPortp[SysPort];
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- switch (readb(&PktCmdP->Command)) {
- case RIOC_BREAK_RECEIVED:
- rio_dprintk(RIO_DEBUG_CMD, "Received a break!\n");
- /* If the current line disc. is not multi-threading and
- the current processor is not the default, reset rup_intr
- and return 0 to ensure that the command packet is
- not freed. */
- /* Call tmgr HANGUP HERE */
- /* Fix this later when every thing works !!!! RAMRAJ */
- gs_got_break(&PortP->gs);
- break;
-
- case RIOC_COMPLETE:
- rio_dprintk(RIO_DEBUG_CMD, "Command complete on phb %d host %Zd\n", readb(&PktCmdP->PhbNum), HostP - p->RIOHosts);
- subCommand = 1;
- switch (readb(&PktCmdP->SubCommand)) {
- case RIOC_MEMDUMP:
- rio_dprintk(RIO_DEBUG_CMD, "Memory dump cmd (0x%x) from addr 0x%x\n", readb(&PktCmdP->SubCommand), readw(&PktCmdP->SubAddr));
- break;
- case RIOC_READ_REGISTER:
- rio_dprintk(RIO_DEBUG_CMD, "Read register (0x%x)\n", readw(&PktCmdP->SubAddr));
- p->CdRegister = (readb(&PktCmdP->ModemStatus) & RIOC_MSVR1_HOST);
- break;
- default:
- subCommand = 0;
- break;
- }
- if (subCommand)
- break;
- rio_dprintk(RIO_DEBUG_CMD, "New status is 0x%x was 0x%x\n", readb(&PktCmdP->PortStatus), PortP->PortState);
- if (PortP->PortState != readb(&PktCmdP->PortStatus)) {
- rio_dprintk(RIO_DEBUG_CMD, "Mark status & wakeup\n");
- PortP->PortState = readb(&PktCmdP->PortStatus);
- /* What should we do here ...
- wakeup( &PortP->PortState );
- */
- } else
- rio_dprintk(RIO_DEBUG_CMD, "No change\n");
-
- /* FALLTHROUGH */
- case RIOC_MODEM_STATUS:
- /*
- ** Knock out the tbusy and tstop bits, as these are not relevant
- ** to the check for modem status change (they're just there because
- ** it's a convenient place to put them!).
- */
- ReportedModemStatus = readb(&PktCmdP->ModemStatus);
- if ((PortP->ModemState & RIOC_MSVR1_HOST) ==
- (ReportedModemStatus & RIOC_MSVR1_HOST)) {
- rio_dprintk(RIO_DEBUG_CMD, "Modem status unchanged 0x%x\n", PortP->ModemState);
- /*
- ** Update ModemState just in case tbusy or tstop states have
- ** changed.
- */
- PortP->ModemState = ReportedModemStatus;
- } else {
- rio_dprintk(RIO_DEBUG_CMD, "Modem status change from 0x%x to 0x%x\n", PortP->ModemState, ReportedModemStatus);
- PortP->ModemState = ReportedModemStatus;
-#ifdef MODEM_SUPPORT
- if (PortP->Mapped) {
- /***********************************************************\
- *************************************************************
- *** ***
- *** M O D E M S T A T E C H A N G E ***
- *** ***
- *************************************************************
- \***********************************************************/
- /*
- ** If the device is a modem, then check the modem
- ** carrier.
- */
- if (PortP->gs.port.tty == NULL)
- break;
- if (PortP->gs.port.tty->termios == NULL)
- break;
-
- if (!(PortP->gs.port.tty->termios->c_cflag & CLOCAL) && ((PortP->State & (RIO_MOPEN | RIO_WOPEN)))) {
-
- rio_dprintk(RIO_DEBUG_CMD, "Is there a Carrier?\n");
- /*
- ** Is there a carrier?
- */
- if (PortP->ModemState & RIOC_MSVR1_CD) {
- /*
- ** Has carrier just appeared?
- */
- if (!(PortP->State & RIO_CARR_ON)) {
- rio_dprintk(RIO_DEBUG_CMD, "Carrier just came up.\n");
- PortP->State |= RIO_CARR_ON;
- /*
- ** wakeup anyone in WOPEN
- */
- if (PortP->State & (PORT_ISOPEN | RIO_WOPEN))
- wake_up_interruptible(&PortP->gs.port.open_wait);
- }
- } else {
- /*
- ** Has carrier just dropped?
- */
- if (PortP->State & RIO_CARR_ON) {
- if (PortP->State & (PORT_ISOPEN | RIO_WOPEN | RIO_MOPEN))
- tty_hangup(PortP->gs.port.tty);
- PortP->State &= ~RIO_CARR_ON;
- rio_dprintk(RIO_DEBUG_CMD, "Carrirer just went down\n");
- }
- }
- }
- }
-#endif
- }
- break;
-
- default:
- rio_dprintk(RIO_DEBUG_CMD, "Unknown command %d on CMD_RUP of host %Zd\n", readb(&PktCmdP->Command), HostP - p->RIOHosts);
- break;
- }
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
-
- func_exit();
-
- return 1;
-}
-
-/*
-** The command mechanism:
-** Each rup has a chain of commands associated with it.
-** This chain is maintained by routines in this file.
-** Periodically we are called and we run a quick check of all the
-** active chains to determine if there is a command to be executed,
-** and if the rup is ready to accept it.
-**
-*/
-
-/*
-** Allocate an empty command block.
-*/
-struct CmdBlk *RIOGetCmdBlk(void)
-{
- struct CmdBlk *CmdBlkP;
-
- CmdBlkP = kzalloc(sizeof(struct CmdBlk), GFP_ATOMIC);
- return CmdBlkP;
-}
-
-/*
-** Return a block to the head of the free list.
-*/
-void RIOFreeCmdBlk(struct CmdBlk *CmdBlkP)
-{
- kfree(CmdBlkP);
-}
-
-/*
-** attach a command block to the list of commands to be performed for
-** a given rup.
-*/
-int RIOQueueCmdBlk(struct Host *HostP, uint Rup, struct CmdBlk *CmdBlkP)
-{
- struct CmdBlk **Base;
- struct UnixRup *UnixRupP;
- unsigned long flags;
-
- if (Rup >= (unsigned short) (MAX_RUP + LINKS_PER_UNIT)) {
- rio_dprintk(RIO_DEBUG_CMD, "Illegal rup number %d in RIOQueueCmdBlk\n", Rup);
- RIOFreeCmdBlk(CmdBlkP);
- return RIO_FAIL;
- }
-
- UnixRupP = &HostP->UnixRups[Rup];
-
- rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
-
- /*
- ** If the RUP is currently inactive, then put the request
- ** straight on the RUP....
- */
- if ((UnixRupP->CmdsWaitingP == NULL) && (UnixRupP->CmdPendingP == NULL) && (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE) && (CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP) (CmdBlkP->PreArg, CmdBlkP)
- : 1)) {
- rio_dprintk(RIO_DEBUG_CMD, "RUP inactive-placing command straight on. Cmd byte is 0x%x\n", CmdBlkP->Packet.data[0]);
-
- /*
- ** Whammy! blat that pack!
- */
- HostP->Copy(&CmdBlkP->Packet, RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->txpkt)), sizeof(struct PKT));
-
- /*
- ** place command packet on the pending position.
- */
- UnixRupP->CmdPendingP = CmdBlkP;
-
- /*
- ** set the command register
- */
- writew(TX_PACKET_READY, &UnixRupP->RupP->txcontrol);
-
- rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
-
- return 0;
- }
- rio_dprintk(RIO_DEBUG_CMD, "RUP active - en-queing\n");
-
- if (UnixRupP->CmdsWaitingP != NULL)
- rio_dprintk(RIO_DEBUG_CMD, "Rup active - command waiting\n");
- if (UnixRupP->CmdPendingP != NULL)
- rio_dprintk(RIO_DEBUG_CMD, "Rup active - command pending\n");
- if (readw(&UnixRupP->RupP->txcontrol) != TX_RUP_INACTIVE)
- rio_dprintk(RIO_DEBUG_CMD, "Rup active - command rup not ready\n");
-
- Base = &UnixRupP->CmdsWaitingP;
-
- rio_dprintk(RIO_DEBUG_CMD, "First try to queue cmdblk %p at %p\n", CmdBlkP, Base);
-
- while (*Base) {
- rio_dprintk(RIO_DEBUG_CMD, "Command cmdblk %p here\n", *Base);
- Base = &((*Base)->NextP);
- rio_dprintk(RIO_DEBUG_CMD, "Now try to queue cmd cmdblk %p at %p\n", CmdBlkP, Base);
- }
-
- rio_dprintk(RIO_DEBUG_CMD, "Will queue cmdblk %p at %p\n", CmdBlkP, Base);
-
- *Base = CmdBlkP;
-
- CmdBlkP->NextP = NULL;
-
- rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
-
- return 0;
-}
-
-/*
-** Here we go - if there is an empty rup, fill it!
-** must be called at splrio() or higher.
-*/
-void RIOPollHostCommands(struct rio_info *p, struct Host *HostP)
-{
- struct CmdBlk *CmdBlkP;
- struct UnixRup *UnixRupP;
- struct PKT __iomem *PacketP;
- unsigned short Rup;
- unsigned long flags;
-
-
- Rup = MAX_RUP + LINKS_PER_UNIT;
-
- do { /* do this loop for each RUP */
- /*
- ** locate the rup we are processing & lock it
- */
- UnixRupP = &HostP->UnixRups[--Rup];
-
- spin_lock_irqsave(&UnixRupP->RupLock, flags);
-
- /*
- ** First check for incoming commands:
- */
- if (readw(&UnixRupP->RupP->rxcontrol) != RX_RUP_INACTIVE) {
- int FreeMe;
-
- PacketP = (struct PKT __iomem *) RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->rxpkt));
-
- switch (readb(&PacketP->dest_port)) {
- case BOOT_RUP:
- rio_dprintk(RIO_DEBUG_CMD, "Incoming Boot %s packet '%x'\n", readb(&PacketP->len) & 0x80 ? "Command" : "Data", readb(&PacketP->data[0]));
- rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
- FreeMe = RIOBootRup(p, Rup, HostP, PacketP);
- rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
- break;
-
- case COMMAND_RUP:
- /*
- ** Free the RUP lock as loss of carrier causes a
- ** ttyflush which will (eventually) call another
- ** routine that uses the RUP lock.
- */
- rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
- FreeMe = RIOCommandRup(p, Rup, HostP, PacketP);
- if (readb(&PacketP->data[5]) == RIOC_MEMDUMP) {
- rio_dprintk(RIO_DEBUG_CMD, "Memdump from 0x%x complete\n", readw(&(PacketP->data[6])));
- rio_memcpy_fromio(p->RIOMemDump, &(PacketP->data[8]), 32);
- }
- rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
- break;
-
- case ROUTE_RUP:
- rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
- FreeMe = RIORouteRup(p, Rup, HostP, PacketP);
- rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
- break;
-
- default:
- rio_dprintk(RIO_DEBUG_CMD, "Unknown RUP %d\n", readb(&PacketP->dest_port));
- FreeMe = 1;
- break;
- }
-
- if (FreeMe) {
- rio_dprintk(RIO_DEBUG_CMD, "Free processed incoming command packet\n");
- put_free_end(HostP, PacketP);
-
- writew(RX_RUP_INACTIVE, &UnixRupP->RupP->rxcontrol);
-
- if (readw(&UnixRupP->RupP->handshake) == PHB_HANDSHAKE_SET) {
- rio_dprintk(RIO_DEBUG_CMD, "Handshake rup %d\n", Rup);
- writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &UnixRupP->RupP->handshake);
- }
- }
- }
-
- /*
- ** IF a command was running on the port,
- ** and it has completed, then tidy it up.
- */
- if ((CmdBlkP = UnixRupP->CmdPendingP) && /* ASSIGN! */
- (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE)) {
- /*
- ** we are idle.
- ** there is a command in pending.
- ** Therefore, this command has finished.
- ** So, wakeup whoever is waiting for it (and tell them
- ** what happened).
- */
- if (CmdBlkP->Packet.dest_port == BOOT_RUP)
- rio_dprintk(RIO_DEBUG_CMD, "Free Boot %s Command Block '%x'\n", CmdBlkP->Packet.len & 0x80 ? "Command" : "Data", CmdBlkP->Packet.data[0]);
-
- rio_dprintk(RIO_DEBUG_CMD, "Command %p completed\n", CmdBlkP);
-
- /*
- ** Clear the Rup lock to prevent mutual exclusion.
- */
- if (CmdBlkP->PostFuncP) {
- rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
- (*CmdBlkP->PostFuncP) (CmdBlkP->PostArg, CmdBlkP);
- rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
- }
-
- /*
- ** ....clear the pending flag....
- */
- UnixRupP->CmdPendingP = NULL;
-
- /*
- ** ....and return the command block to the freelist.
- */
- RIOFreeCmdBlk(CmdBlkP);
- }
-
- /*
- ** If there is a command for this rup, and the rup
- ** is idle, then process the command
- */
- if ((CmdBlkP = UnixRupP->CmdsWaitingP) && /* ASSIGN! */
- (UnixRupP->CmdPendingP == NULL) && (readw(&UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE)) {
- /*
- ** if the pre-function is non-zero, call it.
- ** If it returns RIO_FAIL then don't
- ** send this command yet!
- */
- if (!(CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP) (CmdBlkP->PreArg, CmdBlkP) : 1)) {
- rio_dprintk(RIO_DEBUG_CMD, "Not ready to start command %p\n", CmdBlkP);
- } else {
- rio_dprintk(RIO_DEBUG_CMD, "Start new command %p Cmd byte is 0x%x\n", CmdBlkP, CmdBlkP->Packet.data[0]);
- /*
- ** Whammy! blat that pack!
- */
- HostP->Copy(&CmdBlkP->Packet, RIO_PTR(HostP->Caddr, readw(&UnixRupP->RupP->txpkt)), sizeof(struct PKT));
-
- /*
- ** remove the command from the rup command queue...
- */
- UnixRupP->CmdsWaitingP = CmdBlkP->NextP;
-
- /*
- ** ...and place it on the pending position.
- */
- UnixRupP->CmdPendingP = CmdBlkP;
-
- /*
- ** set the command register
- */
- writew(TX_PACKET_READY, &UnixRupP->RupP->txcontrol);
-
- /*
- ** the command block will be freed
- ** when the command has been processed.
- */
- }
- }
- spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
- } while (Rup);
-}
-
-int RIOWFlushMark(unsigned long iPortP, struct CmdBlk *CmdBlkP)
-{
- struct Port *PortP = (struct Port *) iPortP;
- unsigned long flags;
-
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- PortP->WflushFlag++;
- PortP->MagicFlags |= MAGIC_FLUSH;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return RIOUnUse(iPortP, CmdBlkP);
-}
-
-int RIORFlushEnable(unsigned long iPortP, struct CmdBlk *CmdBlkP)
-{
- struct Port *PortP = (struct Port *) iPortP;
- struct PKT __iomem *PacketP;
- unsigned long flags;
-
- rio_spin_lock_irqsave(&PortP->portSem, flags);
-
- while (can_remove_receive(&PacketP, PortP)) {
- remove_receive(PortP);
- put_free_end(PortP->HostP, PacketP);
- }
-
- if (readw(&PortP->PhbP->handshake) == PHB_HANDSHAKE_SET) {
- /*
- ** MAGIC! (Basically, handshake the RX buffer, so that
- ** the RTAs upstream can be re-enabled.)
- */
- rio_dprintk(RIO_DEBUG_CMD, "Util: Set RX handshake bit\n");
- writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &PortP->PhbP->handshake);
- }
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return RIOUnUse(iPortP, CmdBlkP);
-}
-
-int RIOUnUse(unsigned long iPortP, struct CmdBlk *CmdBlkP)
-{
- struct Port *PortP = (struct Port *) iPortP;
- unsigned long flags;
-
- rio_spin_lock_irqsave(&PortP->portSem, flags);
-
- rio_dprintk(RIO_DEBUG_CMD, "Decrement in use count for port\n");
-
- if (PortP->InUse) {
- if (--PortP->InUse != NOT_INUSE) {
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return 0;
- }
- }
- /*
- ** While PortP->InUse is set (i.e. a preemptive command has been sent to
- ** the RTA and is awaiting completion), any transmit data is prevented from
- ** being transferred from the write queue into the transmit packets
- ** (add_transmit) and no furthur transmit interrupt will be sent for that
- ** data. The next interrupt will occur up to 500ms later (RIOIntr is called
- ** twice a second as a safety measure). This was the case when kermit was
- ** used to send data into a RIO port. After each packet was sent, TCFLSH
- ** was called to flush the read queue preemptively. PortP->InUse was
- ** incremented, thereby blocking the 6 byte acknowledgement packet
- ** transmitted back. This acknowledgment hung around for 500ms before
- ** being sent, thus reducing input performance substantially!.
- ** When PortP->InUse becomes NOT_INUSE, we must ensure that any data
- ** hanging around in the transmit buffer is sent immediately.
- */
- writew(1, &PortP->HostP->ParmMapP->tx_intr);
- /* What to do here ..
- wakeup( (caddr_t)&(PortP->InUse) );
- */
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return 0;
-}
-
-/*
-**
-** How to use this file:
-**
-** To send a command down a rup, you need to allocate a command block, fill
-** in the packet information, fill in the command number, fill in the pre-
-** and post- functions and arguments, and then add the command block to the
-** queue of command blocks for the port in question. When the port is idle,
-** then the pre-function will be called. If this returns RIO_FAIL then the
-** command will be re-queued and tried again at a later date (probably in one
-** clock tick). If the pre-function returns NOT RIO_FAIL, then the command
-** packet will be queued on the RUP, and the txcontrol field set to the
-** command number. When the txcontrol field has changed from being the
-** command number, then the post-function will be called, with the argument
-** specified earlier, a pointer to the command block, and the value of
-** txcontrol.
-**
-** To allocate a command block, call RIOGetCmdBlk(). This returns a pointer
-** to the command block structure allocated, or NULL if there aren't any.
-** The block will have been zeroed for you.
-**
-** The structure has the following fields:
-**
-** struct CmdBlk
-** {
-** struct CmdBlk *NextP; ** Pointer to next command block **
-** struct PKT Packet; ** A packet, to copy to the rup **
-** int (*PreFuncP)(); ** The func to call to check if OK **
-** int PreArg; ** The arg for the func **
-** int (*PostFuncP)(); ** The func to call when completed **
-** int PostArg; ** The arg for the func **
-** };
-**
-** You need to fill in ALL fields EXCEPT NextP, which is used to link the
-** blocks together either on the free list or on the Rup list.
-**
-** Packet is an actual packet structure to be filled in with the packet
-** information associated with the command. You need to fill in everything,
-** as the command processor doesn't process the command packet in any way.
-**
-** The PreFuncP is called before the packet is enqueued on the host rup.
-** PreFuncP is called as (*PreFuncP)(PreArg, CmdBlkP);. PreFuncP must
-** return !RIO_FAIL to have the packet queued on the rup, and RIO_FAIL
-** if the packet is NOT to be queued.
-**
-** The PostFuncP is called when the command has completed. It is called
-** as (*PostFuncP)(PostArg, CmdBlkP, txcontrol);. PostFuncP is not expected
-** to return a value. PostFuncP does NOT need to free the command block,
-** as this happens automatically after PostFuncP returns.
-**
-** Once the command block has been filled in, it is attached to the correct
-** queue by calling RIOQueueCmdBlk( HostP, Rup, CmdBlkP ) where HostP is
-** a pointer to the struct Host, Rup is the NUMBER of the rup (NOT a pointer
-** to it!), and CmdBlkP is the pointer to the command block allocated using
-** RIOGetCmdBlk().
-**
-*/
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : rioctrl.c
-** SID : 1.3
-** Last Modified : 11/6/98 10:33:42
-** Retrieved : 11/6/98 10:33:49
-**
-** ident @(#)rioctrl.c 1.3
-**
-** -----------------------------------------------------------------------------
-*/
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-
-#include <linux/termios.h>
-#include <linux/serial.h>
-
-#include <linux/generic_serial.h>
-
-
-#include "linux_compat.h"
-#include "rio_linux.h"
-#include "pkt.h"
-#include "daemon.h"
-#include "rio.h"
-#include "riospace.h"
-#include "cmdpkt.h"
-#include "map.h"
-#include "rup.h"
-#include "port.h"
-#include "riodrvr.h"
-#include "rioinfo.h"
-#include "func.h"
-#include "errors.h"
-#include "pci.h"
-
-#include "parmmap.h"
-#include "unixrup.h"
-#include "board.h"
-#include "host.h"
-#include "phb.h"
-#include "link.h"
-#include "cmdblk.h"
-#include "route.h"
-#include "cirrus.h"
-#include "rioioctl.h"
-
-
-static struct LpbReq LpbReq;
-static struct RupReq RupReq;
-static struct PortReq PortReq;
-static struct HostReq HostReq; /* oh really? global? and no locking? */
-static struct HostDpRam HostDpRam;
-static struct DebugCtrl DebugCtrl;
-static struct Map MapEnt;
-static struct PortSetup PortSetup;
-static struct DownLoad DownLoad;
-static struct SendPack SendPack;
-/* static struct StreamInfo StreamInfo; */
-/* static char modemtable[RIO_PORTS]; */
-static struct SpecialRupCmd SpecialRupCmd;
-static struct PortParams PortParams;
-static struct portStats portStats;
-
-static struct SubCmdStruct {
- ushort Host;
- ushort Rup;
- ushort Port;
- ushort Addr;
-} SubCmd;
-
-struct PortTty {
- uint port;
- struct ttystatics Tty;
-};
-
-static struct PortTty PortTty;
-typedef struct ttystatics TERMIO;
-
-/*
-** This table is used when the config.rio downloads bin code to the
-** driver. We index the table using the product code, 0-F, and call
-** the function pointed to by the entry, passing the information
-** about the boot.
-** The RIOBootCodeUNKNOWN entry is there to politely tell the calling
-** process to bog off.
-*/
-static int
- (*RIOBootTable[MAX_PRODUCT]) (struct rio_info *, struct DownLoad *) = {
- /* 0 */ RIOBootCodeHOST,
- /* Host Card */
- /* 1 */ RIOBootCodeRTA,
- /* RTA */
-};
-
-#define drv_makedev(maj, min) ((((uint) maj & 0xff) << 8) | ((uint) min & 0xff))
-
-static int copy_from_io(void __user *to, void __iomem *from, size_t size)
-{
- void *buf = kmalloc(size, GFP_KERNEL);
- int res = -ENOMEM;
- if (buf) {
- rio_memcpy_fromio(buf, from, size);
- res = copy_to_user(to, buf, size);
- kfree(buf);
- }
- return res;
-}
-
-int riocontrol(struct rio_info *p, dev_t dev, int cmd, unsigned long arg, int su)
-{
- uint Host; /* leave me unsigned! */
- uint port; /* and me! */
- struct Host *HostP;
- ushort loop;
- int Entry;
- struct Port *PortP;
- struct PKT __iomem *PacketP;
- int retval = 0;
- unsigned long flags;
- void __user *argp = (void __user *)arg;
-
- func_enter();
-
- /* Confuse the compiler to think that we've initialized these */
- Host = 0;
- PortP = NULL;
-
- rio_dprintk(RIO_DEBUG_CTRL, "control ioctl cmd: 0x%x arg: %p\n", cmd, argp);
-
- switch (cmd) {
- /*
- ** RIO_SET_TIMER
- **
- ** Change the value of the host card interrupt timer.
- ** If the host card number is -1 then all host cards are changed
- ** otherwise just the specified host card will be changed.
- */
- case RIO_SET_TIMER:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_TIMER to %ldms\n", arg);
- {
- int host, value;
- host = (arg >> 16) & 0x0000FFFF;
- value = arg & 0x0000ffff;
- if (host == -1) {
- for (host = 0; host < p->RIONumHosts; host++) {
- if (p->RIOHosts[host].Flags == RC_RUNNING) {
- writew(value, &p->RIOHosts[host].ParmMapP->timer);
- }
- }
- } else if (host >= p->RIONumHosts) {
- return -EINVAL;
- } else {
- if (p->RIOHosts[host].Flags == RC_RUNNING) {
- writew(value, &p->RIOHosts[host].ParmMapP->timer);
- }
- }
- }
- return 0;
-
- case RIO_FOAD_RTA:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_FOAD_RTA\n");
- return RIOCommandRta(p, arg, RIOFoadRta);
-
- case RIO_ZOMBIE_RTA:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_ZOMBIE_RTA\n");
- return RIOCommandRta(p, arg, RIOZombieRta);
-
- case RIO_IDENTIFY_RTA:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_IDENTIFY_RTA\n");
- return RIOIdentifyRta(p, argp);
-
- case RIO_KILL_NEIGHBOUR:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_KILL_NEIGHBOUR\n");
- return RIOKillNeighbour(p, argp);
-
- case SPECIAL_RUP_CMD:
- {
- struct CmdBlk *CmdBlkP;
-
- rio_dprintk(RIO_DEBUG_CTRL, "SPECIAL_RUP_CMD\n");
- if (copy_from_user(&SpecialRupCmd, argp, sizeof(SpecialRupCmd))) {
- rio_dprintk(RIO_DEBUG_CTRL, "SPECIAL_RUP_CMD copy failed\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- CmdBlkP = RIOGetCmdBlk();
- if (!CmdBlkP) {
- rio_dprintk(RIO_DEBUG_CTRL, "SPECIAL_RUP_CMD GetCmdBlk failed\n");
- return -ENXIO;
- }
- CmdBlkP->Packet = SpecialRupCmd.Packet;
- if (SpecialRupCmd.Host >= p->RIONumHosts)
- SpecialRupCmd.Host = 0;
- rio_dprintk(RIO_DEBUG_CTRL, "Queue special rup command for host %d rup %d\n", SpecialRupCmd.Host, SpecialRupCmd.RupNum);
- if (RIOQueueCmdBlk(&p->RIOHosts[SpecialRupCmd.Host], SpecialRupCmd.RupNum, CmdBlkP) == RIO_FAIL) {
- printk(KERN_WARNING "rio: FAILED TO QUEUE SPECIAL RUP COMMAND\n");
- }
- return 0;
- }
-
- case RIO_DEBUG_MEM:
- return -EPERM;
-
- case RIO_ALL_MODEM:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_ALL_MODEM\n");
- p->RIOError.Error = IOCTL_COMMAND_UNKNOWN;
- return -EINVAL;
-
- case RIO_GET_TABLE:
- /*
- ** Read the routing table from the device driver to user space
- */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_TABLE\n");
-
- if ((retval = RIOApel(p)) != 0)
- return retval;
-
- if (copy_to_user(argp, p->RIOConnectTable, TOTAL_MAP_ENTRIES * sizeof(struct Map))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_TABLE copy failed\n");
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
-
- {
- int entry;
- rio_dprintk(RIO_DEBUG_CTRL, "*****\nMAP ENTRIES\n");
- for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) {
- if ((p->RIOConnectTable[entry].ID == 0) && (p->RIOConnectTable[entry].HostUniqueNum == 0) && (p->RIOConnectTable[entry].RtaUniqueNum == 0))
- continue;
-
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.HostUniqueNum = 0x%x\n", entry, p->RIOConnectTable[entry].HostUniqueNum);
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.RtaUniqueNum = 0x%x\n", entry, p->RIOConnectTable[entry].RtaUniqueNum);
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.ID = 0x%x\n", entry, p->RIOConnectTable[entry].ID);
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.ID2 = 0x%x\n", entry, p->RIOConnectTable[entry].ID2);
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Flags = 0x%x\n", entry, (int) p->RIOConnectTable[entry].Flags);
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.SysPort = 0x%x\n", entry, (int) p->RIOConnectTable[entry].SysPort);
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[0].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[0].Unit);
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[0].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[0].Link);
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[1].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[1].Unit);
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[1].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[1].Link);
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[2].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[2].Unit);
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[2].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[2].Link);
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[3].Unit = %x\n", entry, p->RIOConnectTable[entry].Topology[3].Unit);
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Top[4].Link = %x\n", entry, p->RIOConnectTable[entry].Topology[3].Link);
- rio_dprintk(RIO_DEBUG_CTRL, "Map entry %d.Name = %s\n", entry, p->RIOConnectTable[entry].Name);
- }
- rio_dprintk(RIO_DEBUG_CTRL, "*****\nEND MAP ENTRIES\n");
- }
- p->RIOQuickCheck = NOT_CHANGED; /* a table has been gotten */
- return 0;
-
- case RIO_PUT_TABLE:
- /*
- ** Write the routing table to the device driver from user space
- */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_TABLE\n");
-
- if (!su) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_TABLE !Root\n");
- p->RIOError.Error = NOT_SUPER_USER;
- return -EPERM;
- }
- if (copy_from_user(&p->RIOConnectTable[0], argp, TOTAL_MAP_ENTRIES * sizeof(struct Map))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_TABLE copy failed\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
-/*
-***********************************
- {
- int entry;
- rio_dprint(RIO_DEBUG_CTRL, ("*****\nMAP ENTRIES\n") );
- for ( entry=0; entry<TOTAL_MAP_ENTRIES; entry++ )
- {
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.HostUniqueNum = 0x%x\n", entry, p->RIOConnectTable[entry].HostUniqueNum ) );
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.RtaUniqueNum = 0x%x\n", entry, p->RIOConnectTable[entry].RtaUniqueNum ) );
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.ID = 0x%x\n", entry, p->RIOConnectTable[entry].ID ) );
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.ID2 = 0x%x\n", entry, p->RIOConnectTable[entry].ID2 ) );
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Flags = 0x%x\n", entry, p->RIOConnectTable[entry].Flags ) );
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.SysPort = 0x%x\n", entry, p->RIOConnectTable[entry].SysPort ) );
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[0].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[0].Unit ) );
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[0].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[0].Link ) );
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[1].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[1].Unit ) );
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[1].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[1].Link ) );
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[2].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[2].Unit ) );
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[2].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[2].Link ) );
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[3].Unit = %b\n", entry, p->RIOConnectTable[entry].Topology[3].Unit ) );
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Top[4].Link = %b\n", entry, p->RIOConnectTable[entry].Topology[3].Link ) );
- rio_dprint(RIO_DEBUG_CTRL, ("Map entry %d.Name = %s\n", entry, p->RIOConnectTable[entry].Name ) );
- }
- rio_dprint(RIO_DEBUG_CTRL, ("*****\nEND MAP ENTRIES\n") );
- }
-***********************************
-*/
- return RIONewTable(p);
-
- case RIO_GET_BINDINGS:
- /*
- ** Send bindings table, containing unique numbers of RTAs owned
- ** by this system to user space
- */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_BINDINGS\n");
-
- if (!su) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_BINDINGS !Root\n");
- p->RIOError.Error = NOT_SUPER_USER;
- return -EPERM;
- }
- if (copy_to_user(argp, p->RIOBindTab, (sizeof(ulong) * MAX_RTA_BINDINGS))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_BINDINGS copy failed\n");
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return 0;
-
- case RIO_PUT_BINDINGS:
- /*
- ** Receive a bindings table, containing unique numbers of RTAs owned
- ** by this system
- */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_BINDINGS\n");
-
- if (!su) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_BINDINGS !Root\n");
- p->RIOError.Error = NOT_SUPER_USER;
- return -EPERM;
- }
- if (copy_from_user(&p->RIOBindTab[0], argp, (sizeof(ulong) * MAX_RTA_BINDINGS))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_PUT_BINDINGS copy failed\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- return 0;
-
- case RIO_BIND_RTA:
- {
- int EmptySlot = -1;
- /*
- ** Bind this RTA to host, so that it will be booted by
- ** host in 'boot owned RTAs' mode.
- */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_BIND_RTA\n");
-
- if (!su) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_BIND_RTA !Root\n");
- p->RIOError.Error = NOT_SUPER_USER;
- return -EPERM;
- }
- for (Entry = 0; Entry < MAX_RTA_BINDINGS; Entry++) {
- if ((EmptySlot == -1) && (p->RIOBindTab[Entry] == 0L))
- EmptySlot = Entry;
- else if (p->RIOBindTab[Entry] == arg) {
- /*
- ** Already exists - delete
- */
- p->RIOBindTab[Entry] = 0L;
- rio_dprintk(RIO_DEBUG_CTRL, "Removing Rta %ld from p->RIOBindTab\n", arg);
- return 0;
- }
- }
- /*
- ** Dosen't exist - add
- */
- if (EmptySlot != -1) {
- p->RIOBindTab[EmptySlot] = arg;
- rio_dprintk(RIO_DEBUG_CTRL, "Adding Rta %lx to p->RIOBindTab\n", arg);
- } else {
- rio_dprintk(RIO_DEBUG_CTRL, "p->RIOBindTab full! - Rta %lx not added\n", arg);
- return -ENOMEM;
- }
- return 0;
- }
-
- case RIO_RESUME:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME\n");
- port = arg;
- if ((port < 0) || (port > 511)) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Bad port number %d\n", port);
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
- PortP = p->RIOPortp[port];
- if (!PortP->Mapped) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Port %d not mapped\n", port);
- p->RIOError.Error = PORT_NOT_MAPPED_INTO_SYSTEM;
- return -EINVAL;
- }
- if (!(PortP->State & (RIO_LOPEN | RIO_MOPEN))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Port %d not open\n", port);
- return -EINVAL;
- }
-
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- if (RIOPreemptiveCmd(p, (p->RIOPortp[port]), RIOC_RESUME) ==
- RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME failed\n");
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return -EBUSY;
- } else {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESUME: Port %d resumed\n", port);
- PortP->State |= RIO_BUSY;
- }
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return retval;
-
- case RIO_ASSIGN_RTA:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_ASSIGN_RTA\n");
- if (!su) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_ASSIGN_RTA !Root\n");
- p->RIOError.Error = NOT_SUPER_USER;
- return -EPERM;
- }
- if (copy_from_user(&MapEnt, argp, sizeof(MapEnt))) {
- rio_dprintk(RIO_DEBUG_CTRL, "Copy from user space failed\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- return RIOAssignRta(p, &MapEnt);
-
- case RIO_CHANGE_NAME:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_CHANGE_NAME\n");
- if (!su) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_CHANGE_NAME !Root\n");
- p->RIOError.Error = NOT_SUPER_USER;
- return -EPERM;
- }
- if (copy_from_user(&MapEnt, argp, sizeof(MapEnt))) {
- rio_dprintk(RIO_DEBUG_CTRL, "Copy from user space failed\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- return RIOChangeName(p, &MapEnt);
-
- case RIO_DELETE_RTA:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_DELETE_RTA\n");
- if (!su) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_DELETE_RTA !Root\n");
- p->RIOError.Error = NOT_SUPER_USER;
- return -EPERM;
- }
- if (copy_from_user(&MapEnt, argp, sizeof(MapEnt))) {
- rio_dprintk(RIO_DEBUG_CTRL, "Copy from data space failed\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- return RIODeleteRta(p, &MapEnt);
-
- case RIO_QUICK_CHECK:
- if (copy_to_user(argp, &p->RIORtaDisCons, sizeof(unsigned int))) {
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return 0;
-
- case RIO_LAST_ERROR:
- if (copy_to_user(argp, &p->RIOError, sizeof(struct Error)))
- return -EFAULT;
- return 0;
-
- case RIO_GET_LOG:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_LOG\n");
- return -EINVAL;
-
- case RIO_GET_MODTYPE:
- if (copy_from_user(&port, argp, sizeof(unsigned int))) {
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- rio_dprintk(RIO_DEBUG_CTRL, "Get module type for port %d\n", port);
- if (port < 0 || port > 511) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_MODTYPE: Bad port number %d\n", port);
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
- PortP = (p->RIOPortp[port]);
- if (!PortP->Mapped) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_MODTYPE: Port %d not mapped\n", port);
- p->RIOError.Error = PORT_NOT_MAPPED_INTO_SYSTEM;
- return -EINVAL;
- }
- /*
- ** Return module type of port
- */
- port = PortP->HostP->UnixRups[PortP->RupNum].ModTypes;
- if (copy_to_user(argp, &port, sizeof(unsigned int))) {
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return (0);
- case RIO_BLOCK_OPENS:
- rio_dprintk(RIO_DEBUG_CTRL, "Opens block until booted\n");
- for (Entry = 0; Entry < RIO_PORTS; Entry++) {
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- p->RIOPortp[Entry]->WaitUntilBooted = 1;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- }
- return 0;
-
- case RIO_SETUP_PORTS:
- rio_dprintk(RIO_DEBUG_CTRL, "Setup ports\n");
- if (copy_from_user(&PortSetup, argp, sizeof(PortSetup))) {
- p->RIOError.Error = COPYIN_FAILED;
- rio_dprintk(RIO_DEBUG_CTRL, "EFAULT");
- return -EFAULT;
- }
- if (PortSetup.From > PortSetup.To || PortSetup.To >= RIO_PORTS) {
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- rio_dprintk(RIO_DEBUG_CTRL, "ENXIO");
- return -ENXIO;
- }
- if (PortSetup.XpCps > p->RIOConf.MaxXpCps || PortSetup.XpCps < p->RIOConf.MinXpCps) {
- p->RIOError.Error = XPRINT_CPS_OUT_OF_RANGE;
- rio_dprintk(RIO_DEBUG_CTRL, "EINVAL");
- return -EINVAL;
- }
- if (!p->RIOPortp) {
- printk(KERN_ERR "rio: No p->RIOPortp array!\n");
- rio_dprintk(RIO_DEBUG_CTRL, "No p->RIOPortp array!\n");
- return -EIO;
- }
- rio_dprintk(RIO_DEBUG_CTRL, "entering loop (%d %d)!\n", PortSetup.From, PortSetup.To);
- for (loop = PortSetup.From; loop <= PortSetup.To; loop++) {
- rio_dprintk(RIO_DEBUG_CTRL, "in loop (%d)!\n", loop);
- }
- rio_dprintk(RIO_DEBUG_CTRL, "after loop (%d)!\n", loop);
- rio_dprintk(RIO_DEBUG_CTRL, "Retval:%x\n", retval);
- return retval;
-
- case RIO_GET_PORT_SETUP:
- rio_dprintk(RIO_DEBUG_CTRL, "Get port setup\n");
- if (copy_from_user(&PortSetup, argp, sizeof(PortSetup))) {
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- if (PortSetup.From >= RIO_PORTS) {
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -ENXIO;
- }
-
- port = PortSetup.To = PortSetup.From;
- PortSetup.IxAny = (p->RIOPortp[port]->Config & RIO_IXANY) ? 1 : 0;
- PortSetup.IxOn = (p->RIOPortp[port]->Config & RIO_IXON) ? 1 : 0;
- PortSetup.Drain = (p->RIOPortp[port]->Config & RIO_WAITDRAIN) ? 1 : 0;
- PortSetup.Store = p->RIOPortp[port]->Store;
- PortSetup.Lock = p->RIOPortp[port]->Lock;
- PortSetup.XpCps = p->RIOPortp[port]->Xprint.XpCps;
- memcpy(PortSetup.XpOn, p->RIOPortp[port]->Xprint.XpOn, MAX_XP_CTRL_LEN);
- memcpy(PortSetup.XpOff, p->RIOPortp[port]->Xprint.XpOff, MAX_XP_CTRL_LEN);
- PortSetup.XpOn[MAX_XP_CTRL_LEN - 1] = '\0';
- PortSetup.XpOff[MAX_XP_CTRL_LEN - 1] = '\0';
-
- if (copy_to_user(argp, &PortSetup, sizeof(PortSetup))) {
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return retval;
-
- case RIO_GET_PORT_PARAMS:
- rio_dprintk(RIO_DEBUG_CTRL, "Get port params\n");
- if (copy_from_user(&PortParams, argp, sizeof(struct PortParams))) {
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- if (PortParams.Port >= RIO_PORTS) {
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -ENXIO;
- }
- PortP = (p->RIOPortp[PortParams.Port]);
- PortParams.Config = PortP->Config;
- PortParams.State = PortP->State;
- rio_dprintk(RIO_DEBUG_CTRL, "Port %d\n", PortParams.Port);
-
- if (copy_to_user(argp, &PortParams, sizeof(struct PortParams))) {
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return retval;
-
- case RIO_GET_PORT_TTY:
- rio_dprintk(RIO_DEBUG_CTRL, "Get port tty\n");
- if (copy_from_user(&PortTty, argp, sizeof(struct PortTty))) {
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- if (PortTty.port >= RIO_PORTS) {
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -ENXIO;
- }
-
- rio_dprintk(RIO_DEBUG_CTRL, "Port %d\n", PortTty.port);
- PortP = (p->RIOPortp[PortTty.port]);
- if (copy_to_user(argp, &PortTty, sizeof(struct PortTty))) {
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return retval;
-
- case RIO_SET_PORT_TTY:
- if (copy_from_user(&PortTty, argp, sizeof(struct PortTty))) {
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- rio_dprintk(RIO_DEBUG_CTRL, "Set port %d tty\n", PortTty.port);
- if (PortTty.port >= (ushort) RIO_PORTS) {
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -ENXIO;
- }
- PortP = (p->RIOPortp[PortTty.port]);
- RIOParam(PortP, RIOC_CONFIG, PortP->State & RIO_MODEM,
- OK_TO_SLEEP);
- return retval;
-
- case RIO_SET_PORT_PARAMS:
- rio_dprintk(RIO_DEBUG_CTRL, "Set port params\n");
- if (copy_from_user(&PortParams, argp, sizeof(PortParams))) {
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- if (PortParams.Port >= (ushort) RIO_PORTS) {
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -ENXIO;
- }
- PortP = (p->RIOPortp[PortParams.Port]);
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- PortP->Config = PortParams.Config;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return retval;
-
- case RIO_GET_PORT_STATS:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_PORT_STATS\n");
- if (copy_from_user(&portStats, argp, sizeof(struct portStats))) {
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- if (portStats.port < 0 || portStats.port >= RIO_PORTS) {
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -ENXIO;
- }
- PortP = (p->RIOPortp[portStats.port]);
- portStats.gather = PortP->statsGather;
- portStats.txchars = PortP->txchars;
- portStats.rxchars = PortP->rxchars;
- portStats.opens = PortP->opens;
- portStats.closes = PortP->closes;
- portStats.ioctls = PortP->ioctls;
- if (copy_to_user(argp, &portStats, sizeof(struct portStats))) {
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return retval;
-
- case RIO_RESET_PORT_STATS:
- port = arg;
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_RESET_PORT_STATS\n");
- if (port >= RIO_PORTS) {
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -ENXIO;
- }
- PortP = (p->RIOPortp[port]);
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- PortP->txchars = 0;
- PortP->rxchars = 0;
- PortP->opens = 0;
- PortP->closes = 0;
- PortP->ioctls = 0;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return retval;
-
- case RIO_GATHER_PORT_STATS:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_GATHER_PORT_STATS\n");
- if (copy_from_user(&portStats, argp, sizeof(struct portStats))) {
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- if (portStats.port < 0 || portStats.port >= RIO_PORTS) {
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -ENXIO;
- }
- PortP = (p->RIOPortp[portStats.port]);
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- PortP->statsGather = portStats.gather;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return retval;
-
- case RIO_READ_CONFIG:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_CONFIG\n");
- if (copy_to_user(argp, &p->RIOConf, sizeof(struct Conf))) {
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return retval;
-
- case RIO_SET_CONFIG:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_CONFIG\n");
- if (!su) {
- p->RIOError.Error = NOT_SUPER_USER;
- return -EPERM;
- }
- if (copy_from_user(&p->RIOConf, argp, sizeof(struct Conf))) {
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- /*
- ** move a few value around
- */
- for (Host = 0; Host < p->RIONumHosts; Host++)
- if ((p->RIOHosts[Host].Flags & RUN_STATE) == RC_RUNNING)
- writew(p->RIOConf.Timer, &p->RIOHosts[Host].ParmMapP->timer);
- return retval;
-
- case RIO_START_POLLER:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_START_POLLER\n");
- return -EINVAL;
-
- case RIO_STOP_POLLER:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_STOP_POLLER\n");
- if (!su) {
- p->RIOError.Error = NOT_SUPER_USER;
- return -EPERM;
- }
- p->RIOPolling = NOT_POLLING;
- return retval;
-
- case RIO_SETDEBUG:
- case RIO_GETDEBUG:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_SETDEBUG/RIO_GETDEBUG\n");
- if (copy_from_user(&DebugCtrl, argp, sizeof(DebugCtrl))) {
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- if (DebugCtrl.SysPort == NO_PORT) {
- if (cmd == RIO_SETDEBUG) {
- if (!su) {
- p->RIOError.Error = NOT_SUPER_USER;
- return -EPERM;
- }
- p->rio_debug = DebugCtrl.Debug;
- p->RIODebugWait = DebugCtrl.Wait;
- rio_dprintk(RIO_DEBUG_CTRL, "Set global debug to 0x%x set wait to 0x%x\n", p->rio_debug, p->RIODebugWait);
- } else {
- rio_dprintk(RIO_DEBUG_CTRL, "Get global debug 0x%x wait 0x%x\n", p->rio_debug, p->RIODebugWait);
- DebugCtrl.Debug = p->rio_debug;
- DebugCtrl.Wait = p->RIODebugWait;
- if (copy_to_user(argp, &DebugCtrl, sizeof(DebugCtrl))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET/GET DEBUG: bad port number %d\n", DebugCtrl.SysPort);
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- }
- } else if (DebugCtrl.SysPort >= RIO_PORTS && DebugCtrl.SysPort != NO_PORT) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET/GET DEBUG: bad port number %d\n", DebugCtrl.SysPort);
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -ENXIO;
- } else if (cmd == RIO_SETDEBUG) {
- if (!su) {
- p->RIOError.Error = NOT_SUPER_USER;
- return -EPERM;
- }
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- p->RIOPortp[DebugCtrl.SysPort]->Debug = DebugCtrl.Debug;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_SETDEBUG 0x%x\n", p->RIOPortp[DebugCtrl.SysPort]->Debug);
- } else {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_GETDEBUG 0x%x\n", p->RIOPortp[DebugCtrl.SysPort]->Debug);
- DebugCtrl.Debug = p->RIOPortp[DebugCtrl.SysPort]->Debug;
- if (copy_to_user(argp, &DebugCtrl, sizeof(DebugCtrl))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_GETDEBUG: Bad copy to user space\n");
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- }
- return retval;
-
- case RIO_VERSID:
- /*
- ** Enquire about the release and version.
- ** We return MAX_VERSION_LEN bytes, being a
- ** textual null terminated string.
- */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_VERSID\n");
- if (copy_to_user(argp, RIOVersid(), sizeof(struct rioVersion))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_VERSID: Bad copy to user space (host=%d)\n", Host);
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return retval;
-
- case RIO_NUM_HOSTS:
- /*
- ** Enquire as to the number of hosts located
- ** at init time.
- */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_NUM_HOSTS\n");
- if (copy_to_user(argp, &p->RIONumHosts, sizeof(p->RIONumHosts))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_NUM_HOSTS: Bad copy to user space\n");
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return retval;
-
- case RIO_HOST_FOAD:
- /*
- ** Kill host. This may not be in the final version...
- */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_FOAD %ld\n", arg);
- if (!su) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_FOAD: Not super user\n");
- p->RIOError.Error = NOT_SUPER_USER;
- return -EPERM;
- }
- p->RIOHalted = 1;
- p->RIOSystemUp = 0;
-
- for (Host = 0; Host < p->RIONumHosts; Host++) {
- (void) RIOBoardTest(p->RIOHosts[Host].PaddrP, p->RIOHosts[Host].Caddr, p->RIOHosts[Host].Type, p->RIOHosts[Host].Slot);
- memset(&p->RIOHosts[Host].Flags, 0, ((char *) &p->RIOHosts[Host].____end_marker____) - ((char *) &p->RIOHosts[Host].Flags));
- p->RIOHosts[Host].Flags = RC_WAITING;
- }
- RIOFoadWakeup(p);
- p->RIONumBootPkts = 0;
- p->RIOBooting = 0;
- printk("HEEEEELP!\n");
-
- for (loop = 0; loop < RIO_PORTS; loop++) {
- spin_lock_init(&p->RIOPortp[loop]->portSem);
- p->RIOPortp[loop]->InUse = NOT_INUSE;
- }
-
- p->RIOSystemUp = 0;
- return retval;
-
- case RIO_DOWNLOAD:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD\n");
- if (!su) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD: Not super user\n");
- p->RIOError.Error = NOT_SUPER_USER;
- return -EPERM;
- }
- if (copy_from_user(&DownLoad, argp, sizeof(DownLoad))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD: Copy in from user space failed\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- rio_dprintk(RIO_DEBUG_CTRL, "Copied in download code for product code 0x%x\n", DownLoad.ProductCode);
-
- /*
- ** It is important that the product code is an unsigned object!
- */
- if (DownLoad.ProductCode >= MAX_PRODUCT) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD: Bad product code %d passed\n", DownLoad.ProductCode);
- p->RIOError.Error = NO_SUCH_PRODUCT;
- return -ENXIO;
- }
- /*
- ** do something!
- */
- retval = (*(RIOBootTable[DownLoad.ProductCode])) (p, &DownLoad);
- /* <-- Panic */
- p->RIOHalted = 0;
- /*
- ** and go back, content with a job well completed.
- */
- return retval;
-
- case RIO_PARMS:
- {
- unsigned int host;
-
- if (copy_from_user(&host, argp, sizeof(host))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Copy in from user space failed\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- /*
- ** Fetch the parmmap
- */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_PARMS\n");
- if (copy_from_io(argp, p->RIOHosts[host].ParmMapP, sizeof(PARM_MAP))) {
- p->RIOError.Error = COPYOUT_FAILED;
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_PARMS: Copy out to user space failed\n");
- return -EFAULT;
- }
- }
- return retval;
-
- case RIO_HOST_REQ:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ\n");
- if (copy_from_user(&HostReq, argp, sizeof(HostReq))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Copy in from user space failed\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- if (HostReq.HostNum >= p->RIONumHosts) {
- p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE;
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Illegal host number %d\n", HostReq.HostNum);
- return -ENXIO;
- }
- rio_dprintk(RIO_DEBUG_CTRL, "Request for host %d\n", HostReq.HostNum);
-
- if (copy_to_user(HostReq.HostP, &p->RIOHosts[HostReq.HostNum], sizeof(struct Host))) {
- p->RIOError.Error = COPYOUT_FAILED;
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_REQ: Bad copy to user space\n");
- return -EFAULT;
- }
- return retval;
-
- case RIO_HOST_DPRAM:
- rio_dprintk(RIO_DEBUG_CTRL, "Request for DPRAM\n");
- if (copy_from_user(&HostDpRam, argp, sizeof(HostDpRam))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Copy in from user space failed\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- if (HostDpRam.HostNum >= p->RIONumHosts) {
- p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE;
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Illegal host number %d\n", HostDpRam.HostNum);
- return -ENXIO;
- }
- rio_dprintk(RIO_DEBUG_CTRL, "Request for host %d\n", HostDpRam.HostNum);
-
- if (p->RIOHosts[HostDpRam.HostNum].Type == RIO_PCI) {
- int off;
- /* It's hardware like this that really gets on my tits. */
- static unsigned char copy[sizeof(struct DpRam)];
- for (off = 0; off < sizeof(struct DpRam); off++)
- copy[off] = readb(p->RIOHosts[HostDpRam.HostNum].Caddr + off);
- if (copy_to_user(HostDpRam.DpRamP, copy, sizeof(struct DpRam))) {
- p->RIOError.Error = COPYOUT_FAILED;
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Bad copy to user space\n");
- return -EFAULT;
- }
- } else if (copy_from_io(HostDpRam.DpRamP, p->RIOHosts[HostDpRam.HostNum].Caddr, sizeof(struct DpRam))) {
- p->RIOError.Error = COPYOUT_FAILED;
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_DPRAM: Bad copy to user space\n");
- return -EFAULT;
- }
- return retval;
-
- case RIO_SET_BUSY:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_BUSY\n");
- if (arg > 511) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_SET_BUSY: Bad port number %ld\n", arg);
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- p->RIOPortp[arg]->State |= RIO_BUSY;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return retval;
-
- case RIO_HOST_PORT:
- /*
- ** The daemon want port information
- ** (probably for debug reasons)
- */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT\n");
- if (copy_from_user(&PortReq, argp, sizeof(PortReq))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT: Copy in from user space failed\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
-
- if (PortReq.SysPort >= RIO_PORTS) { /* SysPort is unsigned */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT: Illegal port number %d\n", PortReq.SysPort);
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -ENXIO;
- }
- rio_dprintk(RIO_DEBUG_CTRL, "Request for port %d\n", PortReq.SysPort);
- if (copy_to_user(PortReq.PortP, p->RIOPortp[PortReq.SysPort], sizeof(struct Port))) {
- p->RIOError.Error = COPYOUT_FAILED;
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_PORT: Bad copy to user space\n");
- return -EFAULT;
- }
- return retval;
-
- case RIO_HOST_RUP:
- /*
- ** The daemon want rup information
- ** (probably for debug reasons)
- */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP\n");
- if (copy_from_user(&RupReq, argp, sizeof(RupReq))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Copy in from user space failed\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- if (RupReq.HostNum >= p->RIONumHosts) { /* host is unsigned */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Illegal host number %d\n", RupReq.HostNum);
- p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE;
- return -ENXIO;
- }
- if (RupReq.RupNum >= MAX_RUP + LINKS_PER_UNIT) { /* eek! */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Illegal rup number %d\n", RupReq.RupNum);
- p->RIOError.Error = RUP_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
- HostP = &p->RIOHosts[RupReq.HostNum];
-
- if ((HostP->Flags & RUN_STATE) != RC_RUNNING) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Host %d not running\n", RupReq.HostNum);
- p->RIOError.Error = HOST_NOT_RUNNING;
- return -EIO;
- }
- rio_dprintk(RIO_DEBUG_CTRL, "Request for rup %d from host %d\n", RupReq.RupNum, RupReq.HostNum);
-
- if (copy_from_io(RupReq.RupP, HostP->UnixRups[RupReq.RupNum].RupP, sizeof(struct RUP))) {
- p->RIOError.Error = COPYOUT_FAILED;
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_RUP: Bad copy to user space\n");
- return -EFAULT;
- }
- return retval;
-
- case RIO_HOST_LPB:
- /*
- ** The daemon want lpb information
- ** (probably for debug reasons)
- */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB\n");
- if (copy_from_user(&LpbReq, argp, sizeof(LpbReq))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Bad copy from user space\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- if (LpbReq.Host >= p->RIONumHosts) { /* host is unsigned */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Illegal host number %d\n", LpbReq.Host);
- p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE;
- return -ENXIO;
- }
- if (LpbReq.Link >= LINKS_PER_UNIT) { /* eek! */
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Illegal link number %d\n", LpbReq.Link);
- p->RIOError.Error = LINK_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
- HostP = &p->RIOHosts[LpbReq.Host];
-
- if ((HostP->Flags & RUN_STATE) != RC_RUNNING) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Host %d not running\n", LpbReq.Host);
- p->RIOError.Error = HOST_NOT_RUNNING;
- return -EIO;
- }
- rio_dprintk(RIO_DEBUG_CTRL, "Request for lpb %d from host %d\n", LpbReq.Link, LpbReq.Host);
-
- if (copy_from_io(LpbReq.LpbP, &HostP->LinkStrP[LpbReq.Link], sizeof(struct LPB))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_HOST_LPB: Bad copy to user space\n");
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return retval;
-
- /*
- ** Here 3 IOCTL's that allow us to change the way in which
- ** rio logs errors. send them just to syslog or send them
- ** to both syslog and console or send them to just the console.
- **
- ** See RioStrBuf() in util.c for the other half.
- */
- case RIO_SYSLOG_ONLY:
- p->RIOPrintLogState = PRINT_TO_LOG; /* Just syslog */
- return 0;
-
- case RIO_SYSLOG_CONS:
- p->RIOPrintLogState = PRINT_TO_LOG_CONS; /* syslog and console */
- return 0;
-
- case RIO_CONS_ONLY:
- p->RIOPrintLogState = PRINT_TO_CONS; /* Just console */
- return 0;
-
- case RIO_SIGNALS_ON:
- if (p->RIOSignalProcess) {
- p->RIOError.Error = SIGNALS_ALREADY_SET;
- return -EBUSY;
- }
- /* FIXME: PID tracking */
- p->RIOSignalProcess = current->pid;
- p->RIOPrintDisabled = DONT_PRINT;
- return retval;
-
- case RIO_SIGNALS_OFF:
- if (p->RIOSignalProcess != current->pid) {
- p->RIOError.Error = NOT_RECEIVING_PROCESS;
- return -EPERM;
- }
- rio_dprintk(RIO_DEBUG_CTRL, "Clear signal process to zero\n");
- p->RIOSignalProcess = 0;
- return retval;
-
- case RIO_SET_BYTE_MODE:
- for (Host = 0; Host < p->RIONumHosts; Host++)
- if (p->RIOHosts[Host].Type == RIO_AT)
- p->RIOHosts[Host].Mode &= ~WORD_OPERATION;
- return retval;
-
- case RIO_SET_WORD_MODE:
- for (Host = 0; Host < p->RIONumHosts; Host++)
- if (p->RIOHosts[Host].Type == RIO_AT)
- p->RIOHosts[Host].Mode |= WORD_OPERATION;
- return retval;
-
- case RIO_SET_FAST_BUS:
- for (Host = 0; Host < p->RIONumHosts; Host++)
- if (p->RIOHosts[Host].Type == RIO_AT)
- p->RIOHosts[Host].Mode |= FAST_AT_BUS;
- return retval;
-
- case RIO_SET_SLOW_BUS:
- for (Host = 0; Host < p->RIONumHosts; Host++)
- if (p->RIOHosts[Host].Type == RIO_AT)
- p->RIOHosts[Host].Mode &= ~FAST_AT_BUS;
- return retval;
-
- case RIO_MAP_B50_TO_50:
- case RIO_MAP_B50_TO_57600:
- case RIO_MAP_B110_TO_110:
- case RIO_MAP_B110_TO_115200:
- rio_dprintk(RIO_DEBUG_CTRL, "Baud rate mapping\n");
- port = arg;
- if (port < 0 || port > 511) {
- rio_dprintk(RIO_DEBUG_CTRL, "Baud rate mapping: Bad port number %d\n", port);
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- switch (cmd) {
- case RIO_MAP_B50_TO_50:
- p->RIOPortp[port]->Config |= RIO_MAP_50_TO_50;
- break;
- case RIO_MAP_B50_TO_57600:
- p->RIOPortp[port]->Config &= ~RIO_MAP_50_TO_50;
- break;
- case RIO_MAP_B110_TO_110:
- p->RIOPortp[port]->Config |= RIO_MAP_110_TO_110;
- break;
- case RIO_MAP_B110_TO_115200:
- p->RIOPortp[port]->Config &= ~RIO_MAP_110_TO_110;
- break;
- }
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return retval;
-
- case RIO_STREAM_INFO:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_STREAM_INFO\n");
- return -EINVAL;
-
- case RIO_SEND_PACKET:
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_SEND_PACKET\n");
- if (copy_from_user(&SendPack, argp, sizeof(SendPack))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_SEND_PACKET: Bad copy from user space\n");
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- if (SendPack.PortNum >= 128) {
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -ENXIO;
- }
-
- PortP = p->RIOPortp[SendPack.PortNum];
- rio_spin_lock_irqsave(&PortP->portSem, flags);
-
- if (!can_add_transmit(&PacketP, PortP)) {
- p->RIOError.Error = UNIT_IS_IN_USE;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return -ENOSPC;
- }
-
- for (loop = 0; loop < (ushort) (SendPack.Len & 127); loop++)
- writeb(SendPack.Data[loop], &PacketP->data[loop]);
-
- writeb(SendPack.Len, &PacketP->len);
-
- add_transmit(PortP);
- /*
- ** Count characters transmitted for port statistics reporting
- */
- if (PortP->statsGather)
- PortP->txchars += (SendPack.Len & 127);
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return retval;
-
- case RIO_NO_MESG:
- if (su)
- p->RIONoMessage = 1;
- return su ? 0 : -EPERM;
-
- case RIO_MESG:
- if (su)
- p->RIONoMessage = 0;
- return su ? 0 : -EPERM;
-
- case RIO_WHAT_MESG:
- if (copy_to_user(argp, &p->RIONoMessage, sizeof(p->RIONoMessage))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_WHAT_MESG: Bad copy to user space\n");
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return 0;
-
- case RIO_MEM_DUMP:
- if (copy_from_user(&SubCmd, argp, sizeof(struct SubCmdStruct))) {
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_MEM_DUMP host %d rup %d addr %x\n", SubCmd.Host, SubCmd.Rup, SubCmd.Addr);
-
- if (SubCmd.Rup >= MAX_RUP + LINKS_PER_UNIT) {
- p->RIOError.Error = RUP_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
-
- if (SubCmd.Host >= p->RIONumHosts) {
- p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
-
- port = p->RIOHosts[SubCmd.Host].UnixRups[SubCmd.Rup].BaseSysPort;
-
- PortP = p->RIOPortp[port];
-
- rio_spin_lock_irqsave(&PortP->portSem, flags);
-
- if (RIOPreemptiveCmd(p, PortP, RIOC_MEMDUMP) == RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_MEM_DUMP failed\n");
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return -EBUSY;
- } else
- PortP->State |= RIO_BUSY;
-
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- if (copy_to_user(argp, p->RIOMemDump, MEMDUMP_SIZE)) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_MEM_DUMP copy failed\n");
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return 0;
-
- case RIO_TICK:
- if (arg >= p->RIONumHosts)
- return -EINVAL;
- rio_dprintk(RIO_DEBUG_CTRL, "Set interrupt for host %ld\n", arg);
- writeb(0xFF, &p->RIOHosts[arg].SetInt);
- return 0;
-
- case RIO_TOCK:
- if (arg >= p->RIONumHosts)
- return -EINVAL;
- rio_dprintk(RIO_DEBUG_CTRL, "Clear interrupt for host %ld\n", arg);
- writeb(0xFF, &p->RIOHosts[arg].ResetInt);
- return 0;
-
- case RIO_READ_CHECK:
- /* Check reads for pkts with data[0] the same */
- p->RIOReadCheck = !p->RIOReadCheck;
- if (copy_to_user(argp, &p->RIOReadCheck, sizeof(unsigned int))) {
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return 0;
-
- case RIO_READ_REGISTER:
- if (copy_from_user(&SubCmd, argp, sizeof(struct SubCmdStruct))) {
- p->RIOError.Error = COPYIN_FAILED;
- return -EFAULT;
- }
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_REGISTER host %d rup %d port %d reg %x\n", SubCmd.Host, SubCmd.Rup, SubCmd.Port, SubCmd.Addr);
-
- if (SubCmd.Port > 511) {
- rio_dprintk(RIO_DEBUG_CTRL, "Baud rate mapping: Bad port number %d\n", SubCmd.Port);
- p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
-
- if (SubCmd.Rup >= MAX_RUP + LINKS_PER_UNIT) {
- p->RIOError.Error = RUP_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
-
- if (SubCmd.Host >= p->RIONumHosts) {
- p->RIOError.Error = HOST_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
-
- port = p->RIOHosts[SubCmd.Host].UnixRups[SubCmd.Rup].BaseSysPort + SubCmd.Port;
- PortP = p->RIOPortp[port];
-
- rio_spin_lock_irqsave(&PortP->portSem, flags);
-
- if (RIOPreemptiveCmd(p, PortP, RIOC_READ_REGISTER) ==
- RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_REGISTER failed\n");
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return -EBUSY;
- } else
- PortP->State |= RIO_BUSY;
-
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- if (copy_to_user(argp, &p->CdRegister, sizeof(unsigned int))) {
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_REGISTER copy failed\n");
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- return 0;
- /*
- ** rio_make_dev: given port number (0-511) ORed with port type
- ** (RIO_DEV_DIRECT, RIO_DEV_MODEM, RIO_DEV_XPRINT) return dev_t
- ** value to pass to mknod to create the correct device node.
- */
- case RIO_MAKE_DEV:
- {
- unsigned int port = arg & RIO_MODEM_MASK;
- unsigned int ret;
-
- switch (arg & RIO_DEV_MASK) {
- case RIO_DEV_DIRECT:
- ret = drv_makedev(MAJOR(dev), port);
- rio_dprintk(RIO_DEBUG_CTRL, "Makedev direct 0x%x is 0x%x\n", port, ret);
- return ret;
- case RIO_DEV_MODEM:
- ret = drv_makedev(MAJOR(dev), (port | RIO_MODEM_BIT));
- rio_dprintk(RIO_DEBUG_CTRL, "Makedev modem 0x%x is 0x%x\n", port, ret);
- return ret;
- case RIO_DEV_XPRINT:
- ret = drv_makedev(MAJOR(dev), port);
- rio_dprintk(RIO_DEBUG_CTRL, "Makedev printer 0x%x is 0x%x\n", port, ret);
- return ret;
- }
- rio_dprintk(RIO_DEBUG_CTRL, "MAKE Device is called\n");
- return -EINVAL;
- }
- /*
- ** rio_minor: given a dev_t from a stat() call, return
- ** the port number (0-511) ORed with the port type
- ** ( RIO_DEV_DIRECT, RIO_DEV_MODEM, RIO_DEV_XPRINT )
- */
- case RIO_MINOR:
- {
- dev_t dv;
- int mino;
- unsigned long ret;
-
- dv = (dev_t) (arg);
- mino = RIO_UNMODEM(dv);
-
- if (RIO_ISMODEM(dv)) {
- rio_dprintk(RIO_DEBUG_CTRL, "Minor for device 0x%x: modem %d\n", dv, mino);
- ret = mino | RIO_DEV_MODEM;
- } else {
- rio_dprintk(RIO_DEBUG_CTRL, "Minor for device 0x%x: direct %d\n", dv, mino);
- ret = mino | RIO_DEV_DIRECT;
- }
- return ret;
- }
- }
- rio_dprintk(RIO_DEBUG_CTRL, "INVALID DAEMON IOCTL 0x%x\n", cmd);
- p->RIOError.Error = IOCTL_COMMAND_UNKNOWN;
-
- func_exit();
- return -EINVAL;
-}
-
-/*
-** Pre-emptive commands go on RUPs and are only one byte long.
-*/
-int RIOPreemptiveCmd(struct rio_info *p, struct Port *PortP, u8 Cmd)
-{
- struct CmdBlk *CmdBlkP;
- struct PktCmd_M *PktCmdP;
- int Ret;
- ushort rup;
- int port;
-
- if (PortP->State & RIO_DELETED) {
- rio_dprintk(RIO_DEBUG_CTRL, "Preemptive command to deleted RTA ignored\n");
- return RIO_FAIL;
- }
-
- if ((PortP->InUse == (typeof(PortP->InUse))-1) ||
- !(CmdBlkP = RIOGetCmdBlk())) {
- rio_dprintk(RIO_DEBUG_CTRL, "Cannot allocate command block "
- "for command %d on port %d\n", Cmd, PortP->PortNum);
- return RIO_FAIL;
- }
-
- rio_dprintk(RIO_DEBUG_CTRL, "Command blk %p - InUse now %d\n",
- CmdBlkP, PortP->InUse);
-
- PktCmdP = (struct PktCmd_M *)&CmdBlkP->Packet.data[0];
-
- CmdBlkP->Packet.src_unit = 0;
- if (PortP->SecondBlock)
- rup = PortP->ID2;
- else
- rup = PortP->RupNum;
- CmdBlkP->Packet.dest_unit = rup;
- CmdBlkP->Packet.src_port = COMMAND_RUP;
- CmdBlkP->Packet.dest_port = COMMAND_RUP;
- CmdBlkP->Packet.len = PKT_CMD_BIT | 2;
- CmdBlkP->PostFuncP = RIOUnUse;
- CmdBlkP->PostArg = (unsigned long) PortP;
- PktCmdP->Command = Cmd;
- port = PortP->HostPort % (ushort) PORTS_PER_RTA;
- /*
- ** Index ports 8-15 for 2nd block of 16 port RTA.
- */
- if (PortP->SecondBlock)
- port += (ushort) PORTS_PER_RTA;
- PktCmdP->PhbNum = port;
-
- switch (Cmd) {
- case RIOC_MEMDUMP:
- rio_dprintk(RIO_DEBUG_CTRL, "Queue MEMDUMP command blk %p "
- "(addr 0x%x)\n", CmdBlkP, (int) SubCmd.Addr);
- PktCmdP->SubCommand = RIOC_MEMDUMP;
- PktCmdP->SubAddr = SubCmd.Addr;
- break;
- case RIOC_FCLOSE:
- rio_dprintk(RIO_DEBUG_CTRL, "Queue FCLOSE command blk %p\n",
- CmdBlkP);
- break;
- case RIOC_READ_REGISTER:
- rio_dprintk(RIO_DEBUG_CTRL, "Queue READ_REGISTER (0x%x) "
- "command blk %p\n", (int) SubCmd.Addr, CmdBlkP);
- PktCmdP->SubCommand = RIOC_READ_REGISTER;
- PktCmdP->SubAddr = SubCmd.Addr;
- break;
- case RIOC_RESUME:
- rio_dprintk(RIO_DEBUG_CTRL, "Queue RESUME command blk %p\n",
- CmdBlkP);
- break;
- case RIOC_RFLUSH:
- rio_dprintk(RIO_DEBUG_CTRL, "Queue RFLUSH command blk %p\n",
- CmdBlkP);
- CmdBlkP->PostFuncP = RIORFlushEnable;
- break;
- case RIOC_SUSPEND:
- rio_dprintk(RIO_DEBUG_CTRL, "Queue SUSPEND command blk %p\n",
- CmdBlkP);
- break;
-
- case RIOC_MGET:
- rio_dprintk(RIO_DEBUG_CTRL, "Queue MGET command blk %p\n",
- CmdBlkP);
- break;
-
- case RIOC_MSET:
- case RIOC_MBIC:
- case RIOC_MBIS:
- CmdBlkP->Packet.data[4] = (char) PortP->ModemLines;
- rio_dprintk(RIO_DEBUG_CTRL, "Queue MSET/MBIC/MBIS command "
- "blk %p\n", CmdBlkP);
- break;
-
- case RIOC_WFLUSH:
- /*
- ** If we have queued up the maximum number of Write flushes
- ** allowed then we should not bother sending any more to the
- ** RTA.
- */
- if (PortP->WflushFlag == (typeof(PortP->WflushFlag))-1) {
- rio_dprintk(RIO_DEBUG_CTRL, "Trashed WFLUSH, "
- "WflushFlag about to wrap!");
- RIOFreeCmdBlk(CmdBlkP);
- return (RIO_FAIL);
- } else {
- rio_dprintk(RIO_DEBUG_CTRL, "Queue WFLUSH command "
- "blk %p\n", CmdBlkP);
- CmdBlkP->PostFuncP = RIOWFlushMark;
- }
- break;
- }
-
- PortP->InUse++;
-
- Ret = RIOQueueCmdBlk(PortP->HostP, rup, CmdBlkP);
-
- return Ret;
-}
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : riodrvr.h
-** SID : 1.3
-** Last Modified : 11/6/98 09:22:46
-** Retrieved : 11/6/98 09:22:46
-**
-** ident @(#)riodrvr.h 1.3
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __riodrvr_h
-#define __riodrvr_h
-
-#include <asm/param.h> /* for HZ */
-
-#define MEMDUMP_SIZE 32
-#define MOD_DISABLE (RIO_NOREAD|RIO_NOWRITE|RIO_NOXPRINT)
-
-
-struct rio_info {
- int mode; /* Intr or polled, word/byte */
- spinlock_t RIOIntrSem; /* Interrupt thread sem */
- int current_chan; /* current channel */
- int RIOFailed; /* Not initialised ? */
- int RIOInstallAttempts; /* no. of rio-install() calls */
- int RIOLastPCISearch; /* status of last search */
- int RIONumHosts; /* Number of RIO Hosts */
- struct Host *RIOHosts; /* RIO Host values */
- struct Port **RIOPortp; /* RIO port values */
-/*
-** 02.03.1999 ARG - ESIL 0820 fix
-** We no longer use RIOBootMode
-**
- int RIOBootMode; * RIO boot mode *
-**
-*/
- int RIOPrintDisabled; /* RIO printing disabled ? */
- int RIOPrintLogState; /* RIO printing state ? */
- int RIOPolling; /* Polling ? */
-/*
-** 09.12.1998 ARG - ESIL 0776 part fix
-** The 'RIO_QUICK_CHECK' ioctl was using RIOHalted.
-** The fix for this ESIL introduces another member (RIORtaDisCons) here to be
-** updated in RIOConCon() - to keep track of RTA connections/disconnections.
-** 'RIO_QUICK_CHECK' now returns the value of RIORtaDisCons.
-*/
- int RIOHalted; /* halted ? */
- int RIORtaDisCons; /* RTA connections/disconnections */
- unsigned int RIOReadCheck; /* Rio read check */
- unsigned int RIONoMessage; /* To display message or not */
- unsigned int RIONumBootPkts; /* how many packets for an RTA */
- unsigned int RIOBootCount; /* size of RTA code */
- unsigned int RIOBooting; /* count of outstanding boots */
- unsigned int RIOSystemUp; /* Booted ?? */
- unsigned int RIOCounting; /* for counting interrupts */
- unsigned int RIOIntCount; /* # of intr since last check */
- unsigned int RIOTxCount; /* number of xmit intrs */
- unsigned int RIORxCount; /* number of rx intrs */
- unsigned int RIORupCount; /* number of rup intrs */
- int RIXTimer;
- int RIOBufferSize; /* Buffersize */
- int RIOBufferMask; /* Buffersize */
-
- int RIOFirstMajor; /* First host card's major no */
-
- unsigned int RIOLastPortsMapped; /* highest port number known */
- unsigned int RIOFirstPortsMapped; /* lowest port number known */
-
- unsigned int RIOLastPortsBooted; /* highest port number running */
- unsigned int RIOFirstPortsBooted; /* lowest port number running */
-
- unsigned int RIOLastPortsOpened; /* highest port number running */
- unsigned int RIOFirstPortsOpened; /* lowest port number running */
-
- /* Flag to say that the topology information has been changed. */
- unsigned int RIOQuickCheck;
- unsigned int CdRegister; /* ??? */
- int RIOSignalProcess; /* Signalling process */
- int rio_debug; /* To debug ... */
- int RIODebugWait; /* For what ??? */
- int tpri; /* Thread prio */
- int tid; /* Thread id */
- unsigned int _RIO_Polled; /* Counter for polling */
- unsigned int _RIO_Interrupted; /* Counter for interrupt */
- int intr_tid; /* iointset return value */
- int TxEnSem; /* TxEnable Semaphore */
-
-
- struct Error RIOError; /* to Identify what went wrong */
- struct Conf RIOConf; /* Configuration ??? */
- struct ttystatics channel[RIO_PORTS]; /* channel information */
- char RIOBootPackets[1 + (SIXTY_FOUR_K / RTA_BOOT_DATA_SIZE)]
- [RTA_BOOT_DATA_SIZE];
- struct Map RIOConnectTable[TOTAL_MAP_ENTRIES];
- struct Map RIOSavedTable[TOTAL_MAP_ENTRIES];
-
- /* RTA to host binding table for master/slave operation */
- unsigned long RIOBindTab[MAX_RTA_BINDINGS];
- /* RTA memory dump variable */
- unsigned char RIOMemDump[MEMDUMP_SIZE];
- struct ModuleInfo RIOModuleTypes[MAX_MODULE_TYPES];
-
-};
-
-
-#ifdef linux
-#define debug(x) printk x
-#else
-#define debug(x) kkprintf x
-#endif
-
-
-
-#define RIO_RESET_INT 0x7d80
-
-#endif /* __riodrvr.h */
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : rioinfo.h
-** SID : 1.2
-** Last Modified : 11/6/98 14:07:49
-** Retrieved : 11/6/98 14:07:50
-**
-** ident @(#)rioinfo.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rioinfo_h
-#define __rioinfo_h
-
-/*
-** Host card data structure
-*/
-struct RioHostInfo {
- long location; /* RIO Card Base I/O address */
- long vector; /* RIO Card IRQ vector */
- int bus; /* ISA/EISA/MCA/PCI */
- int mode; /* pointer to host mode - INTERRUPT / POLLED */
- struct old_sgttyb
- *Sg; /* pointer to default term characteristics */
-};
-
-
-/* Mode in rio device info */
-#define INTERRUPTED_MODE 0x01 /* Interrupt is generated */
-#define POLLED_MODE 0x02 /* No interrupt */
-#define AUTO_MODE 0x03 /* Auto mode */
-
-#define WORD_ACCESS_MODE 0x10 /* Word Access Mode */
-#define BYTE_ACCESS_MODE 0x20 /* Byte Access Mode */
-
-
-/* Bus type that RIO supports */
-#define ISA_BUS 0x01 /* The card is ISA */
-#define EISA_BUS 0x02 /* The card is EISA */
-#define MCA_BUS 0x04 /* The card is MCA */
-#define PCI_BUS 0x08 /* The card is PCI */
-
-/*
-** 11.11.1998 ARG - ESIL ???? part fix
-** Moved definition for 'CHAN' here from rioinfo.c (it is now
-** called 'DEF_TERM_CHARACTERISTICS').
-*/
-
-#define DEF_TERM_CHARACTERISTICS \
-{ \
- B19200, B19200, /* input and output speed */ \
- 'H' - '@', /* erase char */ \
- -1, /* 2nd erase char */ \
- 'U' - '@', /* kill char */ \
- ECHO | CRMOD, /* mode */ \
- 'C' - '@', /* interrupt character */ \
- '\\' - '@', /* quit char */ \
- 'Q' - '@', /* start char */ \
- 'S' - '@', /* stop char */ \
- 'D' - '@', /* EOF */ \
- -1, /* brk */ \
- (LCRTBS | LCRTERA | LCRTKIL | LCTLECH), /* local mode word */ \
- 'Z' - '@', /* process stop */ \
- 'Y' - '@', /* delayed stop */ \
- 'R' - '@', /* reprint line */ \
- 'O' - '@', /* flush output */ \
- 'W' - '@', /* word erase */ \
- 'V' - '@' /* literal next char */ \
-}
-
-#endif /* __rioinfo_h */
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : rioinit.c
-** SID : 1.3
-** Last Modified : 11/6/98 10:33:43
-** Retrieved : 11/6/98 10:33:49
-**
-** ident @(#)rioinit.c 1.3
-**
-** -----------------------------------------------------------------------------
-*/
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-
-#include <linux/termios.h>
-#include <linux/serial.h>
-
-#include <linux/generic_serial.h>
-
-
-#include "linux_compat.h"
-#include "pkt.h"
-#include "daemon.h"
-#include "rio.h"
-#include "riospace.h"
-#include "cmdpkt.h"
-#include "map.h"
-#include "rup.h"
-#include "port.h"
-#include "riodrvr.h"
-#include "rioinfo.h"
-#include "func.h"
-#include "errors.h"
-#include "pci.h"
-
-#include "parmmap.h"
-#include "unixrup.h"
-#include "board.h"
-#include "host.h"
-#include "phb.h"
-#include "link.h"
-#include "cmdblk.h"
-#include "route.h"
-#include "cirrus.h"
-#include "rioioctl.h"
-#include "rio_linux.h"
-
-int RIOPCIinit(struct rio_info *p, int Mode);
-
-static int RIOScrub(int, u8 __iomem *, int);
-
-
-/**
-** RIOAssignAT :
-**
-** Fill out the fields in the p->RIOHosts structure now we know we know
-** we have a board present.
-**
-** bits < 0 indicates 8 bit operation requested,
-** bits > 0 indicates 16 bit operation.
-*/
-
-int RIOAssignAT(struct rio_info *p, int Base, void __iomem *virtAddr, int mode)
-{
- int bits;
- struct DpRam __iomem *cardp = (struct DpRam __iomem *)virtAddr;
-
- if ((Base < ONE_MEG) || (mode & BYTE_ACCESS_MODE))
- bits = BYTE_OPERATION;
- else
- bits = WORD_OPERATION;
-
- /*
- ** Board has passed its scrub test. Fill in all the
- ** transient stuff.
- */
- p->RIOHosts[p->RIONumHosts].Caddr = virtAddr;
- p->RIOHosts[p->RIONumHosts].CardP = virtAddr;
-
- /*
- ** Revision 01 AT host cards don't support WORD operations,
- */
- if (readb(&cardp->DpRevision) == 01)
- bits = BYTE_OPERATION;
-
- p->RIOHosts[p->RIONumHosts].Type = RIO_AT;
- p->RIOHosts[p->RIONumHosts].Copy = rio_copy_to_card;
- /* set this later */
- p->RIOHosts[p->RIONumHosts].Slot = -1;
- p->RIOHosts[p->RIONumHosts].Mode = SLOW_LINKS | SLOW_AT_BUS | bits;
- writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | p->RIOHosts[p->RIONumHosts].Mode | INTERRUPT_DISABLE ,
- &p->RIOHosts[p->RIONumHosts].Control);
- writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt);
- writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | p->RIOHosts[p->RIONumHosts].Mode | INTERRUPT_DISABLE,
- &p->RIOHosts[p->RIONumHosts].Control);
- writeb(0xFF, &p->RIOHosts[p->RIONumHosts].ResetInt);
- p->RIOHosts[p->RIONumHosts].UniqueNum =
- ((readb(&p->RIOHosts[p->RIONumHosts].Unique[0])&0xFF)<<0)|
- ((readb(&p->RIOHosts[p->RIONumHosts].Unique[1])&0xFF)<<8)|
- ((readb(&p->RIOHosts[p->RIONumHosts].Unique[2])&0xFF)<<16)|
- ((readb(&p->RIOHosts[p->RIONumHosts].Unique[3])&0xFF)<<24);
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Uniquenum 0x%x\n",p->RIOHosts[p->RIONumHosts].UniqueNum);
-
- p->RIONumHosts++;
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Tests Passed at 0x%x\n", Base);
- return(1);
-}
-
-static u8 val[] = {
-#ifdef VERY_LONG_TEST
- 0x00, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80,
- 0xa5, 0xff, 0x5a, 0x00, 0xff, 0xc9, 0x36,
-#endif
- 0xff, 0x00, 0x00 };
-
-#define TEST_END sizeof(val)
-
-/*
-** RAM test a board.
-** Nothing too complicated, just enough to check it out.
-*/
-int RIOBoardTest(unsigned long paddr, void __iomem *caddr, unsigned char type, int slot)
-{
- struct DpRam __iomem *DpRam = caddr;
- void __iomem *ram[4];
- int size[4];
- int op, bank;
- int nbanks;
-
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Reset host type=%d, DpRam=%p, slot=%d\n",
- type, DpRam, slot);
-
- RIOHostReset(type, DpRam, slot);
-
- /*
- ** Scrub the memory. This comes in several banks:
- ** DPsram1 - 7000h bytes
- ** DPsram2 - 200h bytes
- ** DPsram3 - 7000h bytes
- ** scratch - 1000h bytes
- */
-
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Setup ram/size arrays\n");
-
- size[0] = DP_SRAM1_SIZE;
- size[1] = DP_SRAM2_SIZE;
- size[2] = DP_SRAM3_SIZE;
- size[3] = DP_SCRATCH_SIZE;
-
- ram[0] = DpRam->DpSram1;
- ram[1] = DpRam->DpSram2;
- ram[2] = DpRam->DpSram3;
- nbanks = (type == RIO_PCI) ? 3 : 4;
- if (nbanks == 4)
- ram[3] = DpRam->DpScratch;
-
-
- if (nbanks == 3) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Memory: %p(0x%x), %p(0x%x), %p(0x%x)\n",
- ram[0], size[0], ram[1], size[1], ram[2], size[2]);
- } else {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: %p(0x%x), %p(0x%x), %p(0x%x), %p(0x%x)\n",
- ram[0], size[0], ram[1], size[1], ram[2], size[2], ram[3], size[3]);
- }
-
- /*
- ** This scrub operation will test for crosstalk between
- ** banks. TEST_END is a magic number, and relates to the offset
- ** within the 'val' array used by Scrub.
- */
- for (op=0; op<TEST_END; op++) {
- for (bank=0; bank<nbanks; bank++) {
- if (RIOScrub(op, ram[bank], size[bank]) == RIO_FAIL) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: RIOScrub band %d, op %d failed\n",
- bank, op);
- return RIO_FAIL;
- }
- }
- }
-
- rio_dprintk (RIO_DEBUG_INIT, "Test completed\n");
- return 0;
-}
-
-
-/*
-** Scrub an area of RAM.
-** Define PRETEST and POSTTEST for a more thorough checking of the
-** state of the memory.
-** Call with op set to an index into the above 'val' array to determine
-** which value will be written into memory.
-** Call with op set to zero means that the RAM will not be read and checked
-** before it is written.
-** Call with op not zero and the RAM will be read and compared with val[op-1]
-** to check that the data from the previous phase was retained.
-*/
-
-static int RIOScrub(int op, u8 __iomem *ram, int size)
-{
- int off;
- unsigned char oldbyte;
- unsigned char newbyte;
- unsigned char invbyte;
- unsigned short oldword;
- unsigned short newword;
- unsigned short invword;
- unsigned short swapword;
-
- if (op) {
- oldbyte = val[op-1];
- oldword = oldbyte | (oldbyte<<8);
- } else
- oldbyte = oldword = 0; /* Tell the compiler we've initilalized them. */
- newbyte = val[op];
- newword = newbyte | (newbyte<<8);
- invbyte = ~newbyte;
- invword = invbyte | (invbyte<<8);
-
- /*
- ** Check that the RAM contains the value that should have been left there
- ** by the previous test (not applicable for pass zero)
- */
- if (op) {
- for (off=0; off<size; off++) {
- if (readb(ram + off) != oldbyte) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Pre Check 1: BYTE at offset 0x%x should have been=%x, was=%x\n", off, oldbyte, readb(ram + off));
- return RIO_FAIL;
- }
- }
- for (off=0; off<size; off+=2) {
- if (readw(ram + off) != oldword) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Pre Check: WORD at offset 0x%x should have been=%x, was=%x\n",off,oldword, readw(ram + off));
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Pre Check: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram+off+1));
- return RIO_FAIL;
- }
- }
- }
-
- /*
- ** Now write the INVERSE of the test data into every location, using
- ** BYTE write operations, first checking before each byte is written
- ** that the location contains the old value still, and checking after
- ** the write that the location contains the data specified - this is
- ** the BYTE read/write test.
- */
- for (off=0; off<size; off++) {
- if (op && (readb(ram + off) != oldbyte)) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Pre Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off, oldbyte, readb(ram + off));
- return RIO_FAIL;
- }
- writeb(invbyte, ram + off);
- if (readb(ram + off) != invbyte) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Inv Check: BYTE at offset 0x%x should have been=%x, was=%x\n", off, invbyte, readb(ram + off));
- return RIO_FAIL;
- }
- }
-
- /*
- ** now, use WORD operations to write the test value into every location,
- ** check as before that the location contains the previous test value
- ** before overwriting, and that it contains the data value written
- ** afterwards.
- ** This is the WORD operation test.
- */
- for (off=0; off<size; off+=2) {
- if (readw(ram + off) != invword) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Inv Check: WORD at offset 0x%x should have been=%x, was=%x\n", off, invword, readw(ram + off));
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Inv Check: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram+off+1));
- return RIO_FAIL;
- }
-
- writew(newword, ram + off);
- if ( readw(ram + off) != newword ) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 1: WORD at offset 0x%x should have been=%x, was=%x\n", off, newword, readw(ram + off));
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 1: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram + off + 1));
- return RIO_FAIL;
- }
- }
-
- /*
- ** now run through the block of memory again, first in byte mode
- ** then in word mode, and check that all the locations contain the
- ** required test data.
- */
- for (off=0; off<size; off++) {
- if (readb(ram + off) != newbyte) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Byte Check: BYTE at offset 0x%x should have been=%x, was=%x\n", off, newbyte, readb(ram + off));
- return RIO_FAIL;
- }
- }
-
- for (off=0; off<size; off+=2) {
- if (readw(ram + off) != newword ) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 2: WORD at offset 0x%x should have been=%x, was=%x\n", off, newword, readw(ram + off));
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 2: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram + off + 1));
- return RIO_FAIL;
- }
- }
-
- /*
- ** time to check out byte swapping errors
- */
- swapword = invbyte | (newbyte << 8);
-
- for (off=0; off<size; off+=2) {
- writeb(invbyte, &ram[off]);
- writeb(newbyte, &ram[off+1]);
- }
-
- for ( off=0; off<size; off+=2 ) {
- if (readw(ram + off) != swapword) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 1: WORD at offset 0x%x should have been=%x, was=%x\n", off, swapword, readw(ram + off));
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 1: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, readb(ram + off), off+1, readb(ram + off + 1));
- return RIO_FAIL;
- }
- writew(~swapword, ram + off);
- }
-
- for (off=0; off<size; off+=2) {
- if (readb(ram + off) != newbyte) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off, newbyte, readb(ram + off));
- return RIO_FAIL;
- }
- if (readb(ram + off + 1) != invbyte) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off+1, invbyte, readb(ram + off + 1));
- return RIO_FAIL;
- }
- writew(newword, ram + off);
- }
- return 0;
-}
-
-
-int RIODefaultName(struct rio_info *p, struct Host *HostP, unsigned int UnitId)
-{
- memcpy(HostP->Mapping[UnitId].Name, "UNKNOWN RTA X-XX", 17);
- HostP->Mapping[UnitId].Name[12]='1'+(HostP-p->RIOHosts);
- if ((UnitId+1) > 9) {
- HostP->Mapping[UnitId].Name[14]='0'+((UnitId+1)/10);
- HostP->Mapping[UnitId].Name[15]='0'+((UnitId+1)%10);
- }
- else {
- HostP->Mapping[UnitId].Name[14]='1'+UnitId;
- HostP->Mapping[UnitId].Name[15]=0;
- }
- return 0;
-}
-
-#define RIO_RELEASE "Linux"
-#define RELEASE_ID "1.0"
-
-static struct rioVersion stVersion;
-
-struct rioVersion *RIOVersid(void)
-{
- strlcpy(stVersion.version, "RIO driver for linux V1.0",
- sizeof(stVersion.version));
- strlcpy(stVersion.buildDate, "Aug 15 2010",
- sizeof(stVersion.buildDate));
-
- return &stVersion;
-}
-
-void RIOHostReset(unsigned int Type, struct DpRam __iomem *DpRamP, unsigned int Slot)
-{
- /*
- ** Reset the Tpu
- */
- rio_dprintk (RIO_DEBUG_INIT, "RIOHostReset: type 0x%x", Type);
- switch ( Type ) {
- case RIO_AT:
- rio_dprintk (RIO_DEBUG_INIT, " (RIO_AT)\n");
- writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | INTERRUPT_DISABLE | BYTE_OPERATION |
- SLOW_LINKS | SLOW_AT_BUS, &DpRamP->DpControl);
- writeb(0xFF, &DpRamP->DpResetTpu);
- udelay(3);
- rio_dprintk (RIO_DEBUG_INIT, "RIOHostReset: Don't know if it worked. Try reset again\n");
- writeb(BOOT_FROM_RAM | EXTERNAL_BUS_OFF | INTERRUPT_DISABLE |
- BYTE_OPERATION | SLOW_LINKS | SLOW_AT_BUS, &DpRamP->DpControl);
- writeb(0xFF, &DpRamP->DpResetTpu);
- udelay(3);
- break;
- case RIO_PCI:
- rio_dprintk (RIO_DEBUG_INIT, " (RIO_PCI)\n");
- writeb(RIO_PCI_BOOT_FROM_RAM, &DpRamP->DpControl);
- writeb(0xFF, &DpRamP->DpResetInt);
- writeb(0xFF, &DpRamP->DpResetTpu);
- udelay(100);
- break;
- default:
- rio_dprintk (RIO_DEBUG_INIT, " (UNKNOWN)\n");
- break;
- }
- return;
-}
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : riointr.c
-** SID : 1.2
-** Last Modified : 11/6/98 10:33:44
-** Retrieved : 11/6/98 10:33:49
-**
-** ident @(#)riointr.c 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-
-#include <linux/termios.h>
-#include <linux/serial.h>
-
-#include <linux/generic_serial.h>
-
-#include <linux/delay.h>
-
-#include "linux_compat.h"
-#include "rio_linux.h"
-#include "pkt.h"
-#include "daemon.h"
-#include "rio.h"
-#include "riospace.h"
-#include "cmdpkt.h"
-#include "map.h"
-#include "rup.h"
-#include "port.h"
-#include "riodrvr.h"
-#include "rioinfo.h"
-#include "func.h"
-#include "errors.h"
-#include "pci.h"
-
-#include "parmmap.h"
-#include "unixrup.h"
-#include "board.h"
-#include "host.h"
-#include "phb.h"
-#include "link.h"
-#include "cmdblk.h"
-#include "route.h"
-#include "cirrus.h"
-#include "rioioctl.h"
-
-
-static void RIOReceive(struct rio_info *, struct Port *);
-
-
-static char *firstchars(char *p, int nch)
-{
- static char buf[2][128];
- static int t = 0;
- t = !t;
- memcpy(buf[t], p, nch);
- buf[t][nch] = 0;
- return buf[t];
-}
-
-
-#define INCR( P, I ) ((P) = (((P)+(I)) & p->RIOBufferMask))
-/* Enable and start the transmission of packets */
-void RIOTxEnable(char *en)
-{
- struct Port *PortP;
- struct rio_info *p;
- struct tty_struct *tty;
- int c;
- struct PKT __iomem *PacketP;
- unsigned long flags;
-
- PortP = (struct Port *) en;
- p = (struct rio_info *) PortP->p;
- tty = PortP->gs.port.tty;
-
-
- rio_dprintk(RIO_DEBUG_INTR, "tx port %d: %d chars queued.\n", PortP->PortNum, PortP->gs.xmit_cnt);
-
- if (!PortP->gs.xmit_cnt)
- return;
-
-
- /* This routine is an order of magnitude simpler than the specialix
- version. One of the disadvantages is that this version will send
- an incomplete packet (usually 64 bytes instead of 72) once for
- every 4k worth of data. Let's just say that this won't influence
- performance significantly..... */
-
- rio_spin_lock_irqsave(&PortP->portSem, flags);
-
- while (can_add_transmit(&PacketP, PortP)) {
- c = PortP->gs.xmit_cnt;
- if (c > PKT_MAX_DATA_LEN)
- c = PKT_MAX_DATA_LEN;
-
- /* Don't copy past the end of the source buffer */
- if (c > SERIAL_XMIT_SIZE - PortP->gs.xmit_tail)
- c = SERIAL_XMIT_SIZE - PortP->gs.xmit_tail;
-
- {
- int t;
- t = (c > 10) ? 10 : c;
-
- rio_dprintk(RIO_DEBUG_INTR, "rio: tx port %d: copying %d chars: %s - %s\n", PortP->PortNum, c, firstchars(PortP->gs.xmit_buf + PortP->gs.xmit_tail, t), firstchars(PortP->gs.xmit_buf + PortP->gs.xmit_tail + c - t, t));
- }
- /* If for one reason or another, we can't copy more data,
- we're done! */
- if (c == 0)
- break;
-
- rio_memcpy_toio(PortP->HostP->Caddr, PacketP->data, PortP->gs.xmit_buf + PortP->gs.xmit_tail, c);
- /* udelay (1); */
-
- writeb(c, &(PacketP->len));
- if (!(PortP->State & RIO_DELETED)) {
- add_transmit(PortP);
- /*
- ** Count chars tx'd for port statistics reporting
- */
- if (PortP->statsGather)
- PortP->txchars += c;
- }
- PortP->gs.xmit_tail = (PortP->gs.xmit_tail + c) & (SERIAL_XMIT_SIZE - 1);
- PortP->gs.xmit_cnt -= c;
- }
-
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
-
- if (PortP->gs.xmit_cnt <= (PortP->gs.wakeup_chars + 2 * PKT_MAX_DATA_LEN))
- tty_wakeup(PortP->gs.port.tty);
-
-}
-
-
-/*
-** RIO Host Service routine. Does all the work traditionally associated with an
-** interrupt.
-*/
-static int RupIntr;
-static int RxIntr;
-static int TxIntr;
-
-void RIOServiceHost(struct rio_info *p, struct Host *HostP)
-{
- rio_spin_lock(&HostP->HostLock);
- if ((HostP->Flags & RUN_STATE) != RC_RUNNING) {
- static int t = 0;
- rio_spin_unlock(&HostP->HostLock);
- if ((t++ % 200) == 0)
- rio_dprintk(RIO_DEBUG_INTR, "Interrupt but host not running. flags=%x.\n", (int) HostP->Flags);
- return;
- }
- rio_spin_unlock(&HostP->HostLock);
-
- if (readw(&HostP->ParmMapP->rup_intr)) {
- writew(0, &HostP->ParmMapP->rup_intr);
- p->RIORupCount++;
- RupIntr++;
- rio_dprintk(RIO_DEBUG_INTR, "rio: RUP interrupt on host %Zd\n", HostP - p->RIOHosts);
- RIOPollHostCommands(p, HostP);
- }
-
- if (readw(&HostP->ParmMapP->rx_intr)) {
- int port;
-
- writew(0, &HostP->ParmMapP->rx_intr);
- p->RIORxCount++;
- RxIntr++;
-
- rio_dprintk(RIO_DEBUG_INTR, "rio: RX interrupt on host %Zd\n", HostP - p->RIOHosts);
- /*
- ** Loop through every port. If the port is mapped into
- ** the system ( i.e. has /dev/ttyXXXX associated ) then it is
- ** worth checking. If the port isn't open, grab any packets
- ** hanging on its receive queue and stuff them on the free
- ** list; check for commands on the way.
- */
- for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) {
- struct Port *PortP = p->RIOPortp[port];
- struct tty_struct *ttyP;
- struct PKT __iomem *PacketP;
-
- /*
- ** not mapped in - most of the RIOPortp[] information
- ** has not been set up!
- ** Optimise: ports come in bundles of eight.
- */
- if (!PortP->Mapped) {
- port += 7;
- continue; /* with the next port */
- }
-
- /*
- ** If the host board isn't THIS host board, check the next one.
- ** optimise: ports come in bundles of eight.
- */
- if (PortP->HostP != HostP) {
- port += 7;
- continue;
- }
-
- /*
- ** Let us see - is the port open? If not, then don't service it.
- */
- if (!(PortP->PortState & PORT_ISOPEN)) {
- continue;
- }
-
- /*
- ** find corresponding tty structure. The process of mapping
- ** the ports puts these here.
- */
- ttyP = PortP->gs.port.tty;
-
- /*
- ** Lock the port before we begin working on it.
- */
- rio_spin_lock(&PortP->portSem);
-
- /*
- ** Process received data if there is any.
- */
- if (can_remove_receive(&PacketP, PortP))
- RIOReceive(p, PortP);
-
- /*
- ** If there is no data left to be read from the port, and
- ** it's handshake bit is set, then we must clear the handshake,
- ** so that that downstream RTA is re-enabled.
- */
- if (!can_remove_receive(&PacketP, PortP) && (readw(&PortP->PhbP->handshake) == PHB_HANDSHAKE_SET)) {
- /*
- ** MAGIC! ( Basically, handshake the RX buffer, so that
- ** the RTAs upstream can be re-enabled. )
- */
- rio_dprintk(RIO_DEBUG_INTR, "Set RX handshake bit\n");
- writew(PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET, &PortP->PhbP->handshake);
- }
- rio_spin_unlock(&PortP->portSem);
- }
- }
-
- if (readw(&HostP->ParmMapP->tx_intr)) {
- int port;
-
- writew(0, &HostP->ParmMapP->tx_intr);
-
- p->RIOTxCount++;
- TxIntr++;
- rio_dprintk(RIO_DEBUG_INTR, "rio: TX interrupt on host %Zd\n", HostP - p->RIOHosts);
-
- /*
- ** Loop through every port.
- ** If the port is mapped into the system ( i.e. has /dev/ttyXXXX
- ** associated ) then it is worth checking.
- */
- for (port = p->RIOFirstPortsBooted; port < p->RIOLastPortsBooted + PORTS_PER_RTA; port++) {
- struct Port *PortP = p->RIOPortp[port];
- struct tty_struct *ttyP;
- struct PKT __iomem *PacketP;
-
- /*
- ** not mapped in - most of the RIOPortp[] information
- ** has not been set up!
- */
- if (!PortP->Mapped) {
- port += 7;
- continue; /* with the next port */
- }
-
- /*
- ** If the host board isn't running, then its data structures
- ** are no use to us - continue quietly.
- */
- if (PortP->HostP != HostP) {
- port += 7;
- continue; /* with the next port */
- }
-
- /*
- ** Let us see - is the port open? If not, then don't service it.
- */
- if (!(PortP->PortState & PORT_ISOPEN)) {
- continue;
- }
-
- rio_dprintk(RIO_DEBUG_INTR, "rio: Looking into port %d.\n", port);
- /*
- ** Lock the port before we begin working on it.
- */
- rio_spin_lock(&PortP->portSem);
-
- /*
- ** If we can't add anything to the transmit queue, then
- ** we need do none of this processing.
- */
- if (!can_add_transmit(&PacketP, PortP)) {
- rio_dprintk(RIO_DEBUG_INTR, "Can't add to port, so skipping.\n");
- rio_spin_unlock(&PortP->portSem);
- continue;
- }
-
- /*
- ** find corresponding tty structure. The process of mapping
- ** the ports puts these here.
- */
- ttyP = PortP->gs.port.tty;
- /* If ttyP is NULL, the port is getting closed. Forget about it. */
- if (!ttyP) {
- rio_dprintk(RIO_DEBUG_INTR, "no tty, so skipping.\n");
- rio_spin_unlock(&PortP->portSem);
- continue;
- }
- /*
- ** If there is more room available we start up the transmit
- ** data process again. This can be direct I/O, if the cookmode
- ** is set to COOK_RAW or COOK_MEDIUM, or will be a call to the
- ** riotproc( T_OUTPUT ) if we are in COOK_WELL mode, to fetch
- ** characters via the line discipline. We must always call
- ** the line discipline,
- ** so that user input characters can be echoed correctly.
- **
- ** ++++ Update +++++
- ** With the advent of double buffering, we now see if
- ** TxBufferOut-In is non-zero. If so, then we copy a packet
- ** to the output place, and set it going. If this empties
- ** the buffer, then we must issue a wakeup( ) on OUT.
- ** If it frees space in the buffer then we must issue
- ** a wakeup( ) on IN.
- **
- ** ++++ Extra! Extra! If PortP->WflushFlag is set, then we
- ** have to send a WFLUSH command down the PHB, to mark the
- ** end point of a WFLUSH. We also need to clear out any
- ** data from the double buffer! ( note that WflushFlag is a
- ** *count* of the number of WFLUSH commands outstanding! )
- **
- ** ++++ And there's more!
- ** If an RTA is powered off, then on again, and rebooted,
- ** whilst it has ports open, then we need to re-open the ports.
- ** ( reasonable enough ). We can't do this when we spot the
- ** re-boot, in interrupt time, because the queue is probably
- ** full. So, when we come in here, we need to test if any
- ** ports are in this condition, and re-open the port before
- ** we try to send any more data to it. Now, the re-booted
- ** RTA will be discarding packets from the PHB until it
- ** receives this open packet, but don't worry tooo much
- ** about that. The one thing that is interesting is the
- ** combination of this effect and the WFLUSH effect!
- */
- /* For now don't handle RTA reboots. -- REW.
- Reenabled. Otherwise RTA reboots didn't work. Duh. -- REW */
- if (PortP->MagicFlags) {
- if (PortP->MagicFlags & MAGIC_REBOOT) {
- /*
- ** well, the RTA has been rebooted, and there is room
- ** on its queue to add the open packet that is required.
- **
- ** The messy part of this line is trying to decide if
- ** we need to call the Param function as a tty or as
- ** a modem.
- ** DONT USE CLOCAL AS A TEST FOR THIS!
- **
- ** If we can't param the port, then move on to the
- ** next port.
- */
- PortP->InUse = NOT_INUSE;
-
- rio_spin_unlock(&PortP->portSem);
- if (RIOParam(PortP, RIOC_OPEN, ((PortP->Cor2Copy & (RIOC_COR2_RTSFLOW | RIOC_COR2_CTSFLOW)) == (RIOC_COR2_RTSFLOW | RIOC_COR2_CTSFLOW)) ? 1 : 0, DONT_SLEEP) == RIO_FAIL)
- continue; /* with next port */
- rio_spin_lock(&PortP->portSem);
- PortP->MagicFlags &= ~MAGIC_REBOOT;
- }
-
- /*
- ** As mentioned above, this is a tacky hack to cope
- ** with WFLUSH
- */
- if (PortP->WflushFlag) {
- rio_dprintk(RIO_DEBUG_INTR, "Want to WFLUSH mark this port\n");
-
- if (PortP->InUse)
- rio_dprintk(RIO_DEBUG_INTR, "FAILS - PORT IS IN USE\n");
- }
-
- while (PortP->WflushFlag && can_add_transmit(&PacketP, PortP) && (PortP->InUse == NOT_INUSE)) {
- int p;
- struct PktCmd __iomem *PktCmdP;
-
- rio_dprintk(RIO_DEBUG_INTR, "Add WFLUSH marker to data queue\n");
- /*
- ** make it look just like a WFLUSH command
- */
- PktCmdP = (struct PktCmd __iomem *) &PacketP->data[0];
-
- writeb(RIOC_WFLUSH, &PktCmdP->Command);
-
- p = PortP->HostPort % (u16) PORTS_PER_RTA;
-
- /*
- ** If second block of ports for 16 port RTA, add 8
- ** to index 8-15.
- */
- if (PortP->SecondBlock)
- p += PORTS_PER_RTA;
-
- writeb(p, &PktCmdP->PhbNum);
-
- /*
- ** to make debuggery easier
- */
- writeb('W', &PacketP->data[2]);
- writeb('F', &PacketP->data[3]);
- writeb('L', &PacketP->data[4]);
- writeb('U', &PacketP->data[5]);
- writeb('S', &PacketP->data[6]);
- writeb('H', &PacketP->data[7]);
- writeb(' ', &PacketP->data[8]);
- writeb('0' + PortP->WflushFlag, &PacketP->data[9]);
- writeb(' ', &PacketP->data[10]);
- writeb(' ', &PacketP->data[11]);
- writeb('\0', &PacketP->data[12]);
-
- /*
- ** its two bytes long!
- */
- writeb(PKT_CMD_BIT | 2, &PacketP->len);
-
- /*
- ** queue it!
- */
- if (!(PortP->State & RIO_DELETED)) {
- add_transmit(PortP);
- /*
- ** Count chars tx'd for port statistics reporting
- */
- if (PortP->statsGather)
- PortP->txchars += 2;
- }
-
- if (--(PortP->WflushFlag) == 0) {
- PortP->MagicFlags &= ~MAGIC_FLUSH;
- }
-
- rio_dprintk(RIO_DEBUG_INTR, "Wflush count now stands at %d\n", PortP->WflushFlag);
- }
- if (PortP->MagicFlags & MORE_OUTPUT_EYGOR) {
- if (PortP->MagicFlags & MAGIC_FLUSH) {
- PortP->MagicFlags |= MORE_OUTPUT_EYGOR;
- } else {
- if (!can_add_transmit(&PacketP, PortP)) {
- rio_spin_unlock(&PortP->portSem);
- continue;
- }
- rio_spin_unlock(&PortP->portSem);
- RIOTxEnable((char *) PortP);
- rio_spin_lock(&PortP->portSem);
- PortP->MagicFlags &= ~MORE_OUTPUT_EYGOR;
- }
- }
- }
-
-
- /*
- ** If we can't add anything to the transmit queue, then
- ** we need do none of the remaining processing.
- */
- if (!can_add_transmit(&PacketP, PortP)) {
- rio_spin_unlock(&PortP->portSem);
- continue;
- }
-
- rio_spin_unlock(&PortP->portSem);
- RIOTxEnable((char *) PortP);
- }
- }
-}
-
-/*
-** Routine for handling received data for tty drivers
-*/
-static void RIOReceive(struct rio_info *p, struct Port *PortP)
-{
- struct tty_struct *TtyP;
- unsigned short transCount;
- struct PKT __iomem *PacketP;
- register unsigned int DataCnt;
- unsigned char __iomem *ptr;
- unsigned char *buf;
- int copied = 0;
-
- static int intCount, RxIntCnt;
-
- /*
- ** The receive data process is to remove packets from the
- ** PHB until there aren't any more or the current cblock
- ** is full. When this occurs, there will be some left over
- ** data in the packet, that we must do something with.
- ** As we haven't unhooked the packet from the read list
- ** yet, we can just leave the packet there, having first
- ** made a note of how far we got. This means that we need
- ** a pointer per port saying where we start taking the
- ** data from - this will normally be zero, but when we
- ** run out of space it will be set to the offset of the
- ** next byte to copy from the packet data area. The packet
- ** length field is decremented by the number of bytes that
- ** we successfully removed from the packet. When this reaches
- ** zero, we reset the offset pointer to be zero, and free
- ** the packet from the front of the queue.
- */
-
- intCount++;
-
- TtyP = PortP->gs.port.tty;
- if (!TtyP) {
- rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: tty is null. \n");
- return;
- }
-
- if (PortP->State & RIO_THROTTLE_RX) {
- rio_dprintk(RIO_DEBUG_INTR, "RIOReceive: Throttled. Can't handle more input.\n");
- return;
- }
-
- if (PortP->State & RIO_DELETED) {
- while (can_remove_receive(&PacketP, PortP)) {
- remove_receive(PortP);
- put_free_end(PortP->HostP, PacketP);
- }
- } else {
- /*
- ** loop, just so long as:
- ** i ) there's some data ( i.e. can_remove_receive )
- ** ii ) we haven't been blocked
- ** iii ) there's somewhere to put the data
- ** iv ) we haven't outstayed our welcome
- */
- transCount = 1;
- while (can_remove_receive(&PacketP, PortP)
- && transCount) {
- RxIntCnt++;
-
- /*
- ** check that it is not a command!
- */
- if (readb(&PacketP->len) & PKT_CMD_BIT) {
- rio_dprintk(RIO_DEBUG_INTR, "RIO: unexpected command packet received on PHB\n");
- /* rio_dprint(RIO_DEBUG_INTR, (" sysport = %d\n", p->RIOPortp->PortNum)); */
- rio_dprintk(RIO_DEBUG_INTR, " dest_unit = %d\n", readb(&PacketP->dest_unit));
- rio_dprintk(RIO_DEBUG_INTR, " dest_port = %d\n", readb(&PacketP->dest_port));
- rio_dprintk(RIO_DEBUG_INTR, " src_unit = %d\n", readb(&PacketP->src_unit));
- rio_dprintk(RIO_DEBUG_INTR, " src_port = %d\n", readb(&PacketP->src_port));
- rio_dprintk(RIO_DEBUG_INTR, " len = %d\n", readb(&PacketP->len));
- rio_dprintk(RIO_DEBUG_INTR, " control = %d\n", readb(&PacketP->control));
- rio_dprintk(RIO_DEBUG_INTR, " csum = %d\n", readw(&PacketP->csum));
- rio_dprintk(RIO_DEBUG_INTR, " data bytes: ");
- for (DataCnt = 0; DataCnt < PKT_MAX_DATA_LEN; DataCnt++)
- rio_dprintk(RIO_DEBUG_INTR, "%d\n", readb(&PacketP->data[DataCnt]));
- remove_receive(PortP);
- put_free_end(PortP->HostP, PacketP);
- continue; /* with next packet */
- }
-
- /*
- ** How many characters can we move 'upstream' ?
- **
- ** Determine the minimum of the amount of data
- ** available and the amount of space in which to
- ** put it.
- **
- ** 1. Get the packet length by masking 'len'
- ** for only the length bits.
- ** 2. Available space is [buffer size] - [space used]
- **
- ** Transfer count is the minimum of packet length
- ** and available space.
- */
-
- transCount = tty_buffer_request_room(TtyP, readb(&PacketP->len) & PKT_LEN_MASK);
- rio_dprintk(RIO_DEBUG_REC, "port %d: Copy %d bytes\n", PortP->PortNum, transCount);
- /*
- ** To use the following 'kkprintfs' for debugging - change the '#undef'
- ** to '#define', (this is the only place ___DEBUG_IT___ occurs in the
- ** driver).
- */
- ptr = (unsigned char __iomem *) PacketP->data + PortP->RxDataStart;
-
- tty_prepare_flip_string(TtyP, &buf, transCount);
- rio_memcpy_fromio(buf, ptr, transCount);
- PortP->RxDataStart += transCount;
- writeb(readb(&PacketP->len)-transCount, &PacketP->len);
- copied += transCount;
-
-
-
- if (readb(&PacketP->len) == 0) {
- /*
- ** If we have emptied the packet, then we can
- ** free it, and reset the start pointer for
- ** the next packet.
- */
- remove_receive(PortP);
- put_free_end(PortP->HostP, PacketP);
- PortP->RxDataStart = 0;
- }
- }
- }
- if (copied) {
- rio_dprintk(RIO_DEBUG_REC, "port %d: pushing tty flip buffer: %d total bytes copied.\n", PortP->PortNum, copied);
- tty_flip_buffer_push(TtyP);
- }
-
- return;
-}
-
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : rioioctl.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:13
-** Retrieved : 11/6/98 11:34:22
-**
-** ident @(#)rioioctl.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rioioctl_h__
-#define __rioioctl_h__
-
-/*
-** RIO device driver - user ioctls and associated structures.
-*/
-
-struct portStats {
- int port;
- int gather;
- unsigned long txchars;
- unsigned long rxchars;
- unsigned long opens;
- unsigned long closes;
- unsigned long ioctls;
-};
-
-#define RIOC ('R'<<8)|('i'<<16)|('o'<<24)
-
-#define RIO_QUICK_CHECK (RIOC | 105)
-#define RIO_GATHER_PORT_STATS (RIOC | 193)
-#define RIO_RESET_PORT_STATS (RIOC | 194)
-#define RIO_GET_PORT_STATS (RIOC | 195)
-
-#endif /* __rioioctl_h__ */
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : rioparam.c
-** SID : 1.3
-** Last Modified : 11/6/98 10:33:45
-** Retrieved : 11/6/98 10:33:50
-**
-** ident @(#)rioparam.c 1.3
-**
-** -----------------------------------------------------------------------------
-*/
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-
-#include <linux/termios.h>
-#include <linux/serial.h>
-
-#include <linux/generic_serial.h>
-
-
-#include "linux_compat.h"
-#include "rio_linux.h"
-#include "pkt.h"
-#include "daemon.h"
-#include "rio.h"
-#include "riospace.h"
-#include "cmdpkt.h"
-#include "map.h"
-#include "rup.h"
-#include "port.h"
-#include "riodrvr.h"
-#include "rioinfo.h"
-#include "func.h"
-#include "errors.h"
-#include "pci.h"
-
-#include "parmmap.h"
-#include "unixrup.h"
-#include "board.h"
-#include "host.h"
-#include "phb.h"
-#include "link.h"
-#include "cmdblk.h"
-#include "route.h"
-#include "cirrus.h"
-#include "rioioctl.h"
-#include "param.h"
-
-
-
-/*
-** The Scam, based on email from jeremyr@bugs.specialix.co.uk....
-**
-** To send a command on a particular port, you put a packet with the
-** command bit set onto the port. The command bit is in the len field,
-** and gets ORed in with the actual byte count.
-**
-** When you send a packet with the command bit set the first
-** data byte (data[0]) is interpreted as the command to execute.
-** It also governs what data structure overlay should accompany the packet.
-** Commands are defined in cirrus/cirrus.h
-**
-** If you want the command to pre-emt data already on the queue for the
-** port, set the pre-emptive bit in conjunction with the command bit.
-** It is not defined what will happen if you set the preemptive bit
-** on a packet that is NOT a command.
-**
-** Pre-emptive commands should be queued at the head of the queue using
-** add_start(), whereas normal commands and data are enqueued using
-** add_end().
-**
-** Most commands do not use the remaining bytes in the data array. The
-** exceptions are OPEN MOPEN and CONFIG. (NB. As with the SI CONFIG and
-** OPEN are currently analogous). With these three commands the following
-** 11 data bytes are all used to pass config information such as baud rate etc.
-** The fields are also defined in cirrus.h. Some contain straightforward
-** information such as the transmit XON character. Two contain the transmit and
-** receive baud rates respectively. For most baud rates there is a direct
-** mapping between the rates defined in <sys/termio.h> and the byte in the
-** packet. There are additional (non UNIX-standard) rates defined in
-** /u/dos/rio/cirrus/h/brates.h.
-**
-** The rest of the data fields contain approximations to the Cirrus registers
-** that are used to program number of bits etc. Each registers bit fields is
-** defined in cirrus.h.
-**
-** NB. Only use those bits that are defined as being driver specific
-** or common to the RTA and the driver.
-**
-** All commands going from RTA->Host will be dealt with by the Host code - you
-** will never see them. As with the SI there will be three fields to look out
-** for in each phb (not yet defined - needs defining a.s.a.p).
-**
-** modem_status - current state of handshake pins.
-**
-** port_status - current port status - equivalent to hi_stat for SI, indicates
-** if port is IDLE_OPEN, IDLE_CLOSED etc.
-**
-** break_status - bit X set if break has been received.
-**
-** Happy hacking.
-**
-*/
-
-/*
-** RIOParam is used to open or configure a port. You pass it a PortP,
-** which will have a tty struct attached to it. You also pass a command,
-** either OPEN or CONFIG. The port's setup is taken from the t_ fields
-** of the tty struct inside the PortP, and the port is either opened
-** or re-configured. You must also tell RIOParam if the device is a modem
-** device or not (i.e. top bit of minor number set or clear - take special
-** care when deciding on this!).
-** RIOParam neither flushes nor waits for drain, and is NOT preemptive.
-**
-** RIOParam assumes it will be called at splrio(), and also assumes
-** that CookMode is set correctly in the port structure.
-**
-** NB. for MPX
-** tty lock must NOT have been previously acquired.
-*/
-int RIOParam(struct Port *PortP, int cmd, int Modem, int SleepFlag)
-{
- struct tty_struct *TtyP;
- int retval;
- struct phb_param __iomem *phb_param_ptr;
- struct PKT __iomem *PacketP;
- int res;
- u8 Cor1 = 0, Cor2 = 0, Cor4 = 0, Cor5 = 0;
- u8 TxXon = 0, TxXoff = 0, RxXon = 0, RxXoff = 0;
- u8 LNext = 0, TxBaud = 0, RxBaud = 0;
- int retries = 0xff;
- unsigned long flags;
-
- func_enter();
-
- TtyP = PortP->gs.port.tty;
-
- rio_dprintk(RIO_DEBUG_PARAM, "RIOParam: Port:%d cmd:%d Modem:%d SleepFlag:%d Mapped: %d, tty=%p\n", PortP->PortNum, cmd, Modem, SleepFlag, PortP->Mapped, TtyP);
-
- if (!TtyP) {
- rio_dprintk(RIO_DEBUG_PARAM, "Can't call rioparam with null tty.\n");
-
- func_exit();
-
- return RIO_FAIL;
- }
- rio_spin_lock_irqsave(&PortP->portSem, flags);
-
- if (cmd == RIOC_OPEN) {
- /*
- ** If the port is set to store or lock the parameters, and it is
- ** paramed with OPEN, we want to restore the saved port termio, but
- ** only if StoredTermio has been saved, i.e. NOT 1st open after reboot.
- */
- }
-
- /*
- ** wait for space
- */
- while (!(res = can_add_transmit(&PacketP, PortP)) || (PortP->InUse != NOT_INUSE)) {
- if (retries-- <= 0) {
- break;
- }
- if (PortP->InUse != NOT_INUSE) {
- rio_dprintk(RIO_DEBUG_PARAM, "Port IN_USE for pre-emptive command\n");
- }
-
- if (!res) {
- rio_dprintk(RIO_DEBUG_PARAM, "Port has no space on transmit queue\n");
- }
-
- if (SleepFlag != OK_TO_SLEEP) {
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- func_exit();
-
- return RIO_FAIL;
- }
-
- rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit\n");
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- retval = RIODelay(PortP, HUNDRED_MS);
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- if (retval == RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit broken by signal\n");
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- func_exit();
- return -EINTR;
- }
- if (PortP->State & RIO_DELETED) {
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- func_exit();
- return 0;
- }
- }
-
- if (!res) {
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- func_exit();
-
- return RIO_FAIL;
- }
-
- rio_dprintk(RIO_DEBUG_PARAM, "can_add_transmit() returns %x\n", res);
- rio_dprintk(RIO_DEBUG_PARAM, "Packet is %p\n", PacketP);
-
- phb_param_ptr = (struct phb_param __iomem *) PacketP->data;
-
-
- switch (TtyP->termios->c_cflag & CSIZE) {
- case CS5:
- {
- rio_dprintk(RIO_DEBUG_PARAM, "5 bit data\n");
- Cor1 |= RIOC_COR1_5BITS;
- break;
- }
- case CS6:
- {
- rio_dprintk(RIO_DEBUG_PARAM, "6 bit data\n");
- Cor1 |= RIOC_COR1_6BITS;
- break;
- }
- case CS7:
- {
- rio_dprintk(RIO_DEBUG_PARAM, "7 bit data\n");
- Cor1 |= RIOC_COR1_7BITS;
- break;
- }
- case CS8:
- {
- rio_dprintk(RIO_DEBUG_PARAM, "8 bit data\n");
- Cor1 |= RIOC_COR1_8BITS;
- break;
- }
- }
-
- if (TtyP->termios->c_cflag & CSTOPB) {
- rio_dprintk(RIO_DEBUG_PARAM, "2 stop bits\n");
- Cor1 |= RIOC_COR1_2STOP;
- } else {
- rio_dprintk(RIO_DEBUG_PARAM, "1 stop bit\n");
- Cor1 |= RIOC_COR1_1STOP;
- }
-
- if (TtyP->termios->c_cflag & PARENB) {
- rio_dprintk(RIO_DEBUG_PARAM, "Enable parity\n");
- Cor1 |= RIOC_COR1_NORMAL;
- } else {
- rio_dprintk(RIO_DEBUG_PARAM, "Disable parity\n");
- Cor1 |= RIOC_COR1_NOP;
- }
- if (TtyP->termios->c_cflag & PARODD) {
- rio_dprintk(RIO_DEBUG_PARAM, "Odd parity\n");
- Cor1 |= RIOC_COR1_ODD;
- } else {
- rio_dprintk(RIO_DEBUG_PARAM, "Even parity\n");
- Cor1 |= RIOC_COR1_EVEN;
- }
-
- /*
- ** COR 2
- */
- if (TtyP->termios->c_iflag & IXON) {
- rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop output control\n");
- Cor2 |= RIOC_COR2_IXON;
- } else {
- if (PortP->Config & RIO_IXON) {
- rio_dprintk(RIO_DEBUG_PARAM, "Force enable start/stop output control\n");
- Cor2 |= RIOC_COR2_IXON;
- } else
- rio_dprintk(RIO_DEBUG_PARAM, "IXON has been disabled.\n");
- }
-
- if (TtyP->termios->c_iflag & IXANY) {
- if (PortP->Config & RIO_IXANY) {
- rio_dprintk(RIO_DEBUG_PARAM, "Enable any key to restart output\n");
- Cor2 |= RIOC_COR2_IXANY;
- } else
- rio_dprintk(RIO_DEBUG_PARAM, "IXANY has been disabled due to sanity reasons.\n");
- }
-
- if (TtyP->termios->c_iflag & IXOFF) {
- rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop input control 2\n");
- Cor2 |= RIOC_COR2_IXOFF;
- }
-
- if (TtyP->termios->c_cflag & HUPCL) {
- rio_dprintk(RIO_DEBUG_PARAM, "Hangup on last close\n");
- Cor2 |= RIOC_COR2_HUPCL;
- }
-
- if (C_CRTSCTS(TtyP)) {
- rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control enabled\n");
- Cor2 |= RIOC_COR2_CTSFLOW;
- Cor2 |= RIOC_COR2_RTSFLOW;
- } else {
- rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control disabled\n");
- Cor2 &= ~RIOC_COR2_CTSFLOW;
- Cor2 &= ~RIOC_COR2_RTSFLOW;
- }
-
-
- if (TtyP->termios->c_cflag & CLOCAL) {
- rio_dprintk(RIO_DEBUG_PARAM, "Local line\n");
- } else {
- rio_dprintk(RIO_DEBUG_PARAM, "Possible Modem line\n");
- }
-
- /*
- ** COR 4 (there is no COR 3)
- */
- if (TtyP->termios->c_iflag & IGNBRK) {
- rio_dprintk(RIO_DEBUG_PARAM, "Ignore break condition\n");
- Cor4 |= RIOC_COR4_IGNBRK;
- }
- if (!(TtyP->termios->c_iflag & BRKINT)) {
- rio_dprintk(RIO_DEBUG_PARAM, "Break generates NULL condition\n");
- Cor4 |= RIOC_COR4_NBRKINT;
- } else {
- rio_dprintk(RIO_DEBUG_PARAM, "Interrupt on break condition\n");
- }
-
- if (TtyP->termios->c_iflag & INLCR) {
- rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage return on input\n");
- Cor4 |= RIOC_COR4_INLCR;
- }
-
- if (TtyP->termios->c_iflag & IGNCR) {
- rio_dprintk(RIO_DEBUG_PARAM, "Ignore carriage return on input\n");
- Cor4 |= RIOC_COR4_IGNCR;
- }
-
- if (TtyP->termios->c_iflag & ICRNL) {
- rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on input\n");
- Cor4 |= RIOC_COR4_ICRNL;
- }
- if (TtyP->termios->c_iflag & IGNPAR) {
- rio_dprintk(RIO_DEBUG_PARAM, "Ignore characters with parity errors\n");
- Cor4 |= RIOC_COR4_IGNPAR;
- }
- if (TtyP->termios->c_iflag & PARMRK) {
- rio_dprintk(RIO_DEBUG_PARAM, "Mark parity errors\n");
- Cor4 |= RIOC_COR4_PARMRK;
- }
-
- /*
- ** Set the RAISEMOD flag to ensure that the modem lines are raised
- ** on reception of a config packet.
- ** The download code handles the zero baud condition.
- */
- Cor4 |= RIOC_COR4_RAISEMOD;
-
- /*
- ** COR 5
- */
-
- Cor5 = RIOC_COR5_CMOE;
-
- /*
- ** Set to monitor tbusy/tstop (or not).
- */
-
- if (PortP->MonitorTstate)
- Cor5 |= RIOC_COR5_TSTATE_ON;
- else
- Cor5 |= RIOC_COR5_TSTATE_OFF;
-
- /*
- ** Could set LNE here if you wanted LNext processing. SVR4 will use it.
- */
- if (TtyP->termios->c_iflag & ISTRIP) {
- rio_dprintk(RIO_DEBUG_PARAM, "Strip input characters\n");
- if (!(PortP->State & RIO_TRIAD_MODE)) {
- Cor5 |= RIOC_COR5_ISTRIP;
- }
- }
-
- if (TtyP->termios->c_oflag & ONLCR) {
- rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage-return, newline on output\n");
- if (PortP->CookMode == COOK_MEDIUM)
- Cor5 |= RIOC_COR5_ONLCR;
- }
- if (TtyP->termios->c_oflag & OCRNL) {
- rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on output\n");
- if (PortP->CookMode == COOK_MEDIUM)
- Cor5 |= RIOC_COR5_OCRNL;
- }
- if ((TtyP->termios->c_oflag & TABDLY) == TAB3) {
- rio_dprintk(RIO_DEBUG_PARAM, "Tab delay 3 set\n");
- if (PortP->CookMode == COOK_MEDIUM)
- Cor5 |= RIOC_COR5_TAB3;
- }
-
- /*
- ** Flow control bytes.
- */
- TxXon = TtyP->termios->c_cc[VSTART];
- TxXoff = TtyP->termios->c_cc[VSTOP];
- RxXon = TtyP->termios->c_cc[VSTART];
- RxXoff = TtyP->termios->c_cc[VSTOP];
- /*
- ** LNEXT byte
- */
- LNext = 0;
-
- /*
- ** Baud rate bytes
- */
- rio_dprintk(RIO_DEBUG_PARAM, "Mapping of rx/tx baud %x (%x)\n", TtyP->termios->c_cflag, CBAUD);
-
- switch (TtyP->termios->c_cflag & CBAUD) {
-#define e(b) case B ## b : RxBaud = TxBaud = RIO_B ## b ;break
- e(50);
- e(75);
- e(110);
- e(134);
- e(150);
- e(200);
- e(300);
- e(600);
- e(1200);
- e(1800);
- e(2400);
- e(4800);
- e(9600);
- e(19200);
- e(38400);
- e(57600);
- e(115200); /* e(230400);e(460800); e(921600); */
- }
-
- rio_dprintk(RIO_DEBUG_PARAM, "tx baud 0x%x, rx baud 0x%x\n", TxBaud, RxBaud);
-
-
- /*
- ** Leftovers
- */
- if (TtyP->termios->c_cflag & CREAD)
- rio_dprintk(RIO_DEBUG_PARAM, "Enable receiver\n");
-#ifdef RCV1EN
- if (TtyP->termios->c_cflag & RCV1EN)
- rio_dprintk(RIO_DEBUG_PARAM, "RCV1EN (?)\n");
-#endif
-#ifdef XMT1EN
- if (TtyP->termios->c_cflag & XMT1EN)
- rio_dprintk(RIO_DEBUG_PARAM, "XMT1EN (?)\n");
-#endif
- if (TtyP->termios->c_lflag & ISIG)
- rio_dprintk(RIO_DEBUG_PARAM, "Input character signal generating enabled\n");
- if (TtyP->termios->c_lflag & ICANON)
- rio_dprintk(RIO_DEBUG_PARAM, "Canonical input: erase and kill enabled\n");
- if (TtyP->termios->c_lflag & XCASE)
- rio_dprintk(RIO_DEBUG_PARAM, "Canonical upper/lower presentation\n");
- if (TtyP->termios->c_lflag & ECHO)
- rio_dprintk(RIO_DEBUG_PARAM, "Enable input echo\n");
- if (TtyP->termios->c_lflag & ECHOE)
- rio_dprintk(RIO_DEBUG_PARAM, "Enable echo erase\n");
- if (TtyP->termios->c_lflag & ECHOK)
- rio_dprintk(RIO_DEBUG_PARAM, "Enable echo kill\n");
- if (TtyP->termios->c_lflag & ECHONL)
- rio_dprintk(RIO_DEBUG_PARAM, "Enable echo newline\n");
- if (TtyP->termios->c_lflag & NOFLSH)
- rio_dprintk(RIO_DEBUG_PARAM, "Disable flush after interrupt or quit\n");
-#ifdef TOSTOP
- if (TtyP->termios->c_lflag & TOSTOP)
- rio_dprintk(RIO_DEBUG_PARAM, "Send SIGTTOU for background output\n");
-#endif
-#ifdef XCLUDE
- if (TtyP->termios->c_lflag & XCLUDE)
- rio_dprintk(RIO_DEBUG_PARAM, "Exclusive use of this line\n");
-#endif
- if (TtyP->termios->c_iflag & IUCLC)
- rio_dprintk(RIO_DEBUG_PARAM, "Map uppercase to lowercase on input\n");
- if (TtyP->termios->c_oflag & OPOST)
- rio_dprintk(RIO_DEBUG_PARAM, "Enable output post-processing\n");
- if (TtyP->termios->c_oflag & OLCUC)
- rio_dprintk(RIO_DEBUG_PARAM, "Map lowercase to uppercase on output\n");
- if (TtyP->termios->c_oflag & ONOCR)
- rio_dprintk(RIO_DEBUG_PARAM, "No carriage return output at column 0\n");
- if (TtyP->termios->c_oflag & ONLRET)
- rio_dprintk(RIO_DEBUG_PARAM, "Newline performs carriage return function\n");
- if (TtyP->termios->c_oflag & OFILL)
- rio_dprintk(RIO_DEBUG_PARAM, "Use fill characters for delay\n");
- if (TtyP->termios->c_oflag & OFDEL)
- rio_dprintk(RIO_DEBUG_PARAM, "Fill character is DEL\n");
- if (TtyP->termios->c_oflag & NLDLY)
- rio_dprintk(RIO_DEBUG_PARAM, "Newline delay set\n");
- if (TtyP->termios->c_oflag & CRDLY)
- rio_dprintk(RIO_DEBUG_PARAM, "Carriage return delay set\n");
- if (TtyP->termios->c_oflag & TABDLY)
- rio_dprintk(RIO_DEBUG_PARAM, "Tab delay set\n");
- /*
- ** These things are kind of useful in a later life!
- */
- PortP->Cor2Copy = Cor2;
-
- if (PortP->State & RIO_DELETED) {
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- func_exit();
-
- return RIO_FAIL;
- }
-
- /*
- ** Actually write the info into the packet to be sent
- */
- writeb(cmd, &phb_param_ptr->Cmd);
- writeb(Cor1, &phb_param_ptr->Cor1);
- writeb(Cor2, &phb_param_ptr->Cor2);
- writeb(Cor4, &phb_param_ptr->Cor4);
- writeb(Cor5, &phb_param_ptr->Cor5);
- writeb(TxXon, &phb_param_ptr->TxXon);
- writeb(RxXon, &phb_param_ptr->RxXon);
- writeb(TxXoff, &phb_param_ptr->TxXoff);
- writeb(RxXoff, &phb_param_ptr->RxXoff);
- writeb(LNext, &phb_param_ptr->LNext);
- writeb(TxBaud, &phb_param_ptr->TxBaud);
- writeb(RxBaud, &phb_param_ptr->RxBaud);
-
- /*
- ** Set the length/command field
- */
- writeb(12 | PKT_CMD_BIT, &PacketP->len);
-
- /*
- ** The packet is formed - now, whack it off
- ** to its final destination:
- */
- add_transmit(PortP);
- /*
- ** Count characters transmitted for port statistics reporting
- */
- if (PortP->statsGather)
- PortP->txchars += 12;
-
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
-
- rio_dprintk(RIO_DEBUG_PARAM, "add_transmit returned.\n");
- /*
- ** job done.
- */
- func_exit();
-
- return 0;
-}
-
-
-/*
-** We can add another packet to a transmit queue if the packet pointer pointed
-** to by the TxAdd pointer has PKT_IN_USE clear in its address.
-*/
-int can_add_transmit(struct PKT __iomem **PktP, struct Port *PortP)
-{
- struct PKT __iomem *tp;
-
- *PktP = tp = (struct PKT __iomem *) RIO_PTR(PortP->Caddr, readw(PortP->TxAdd));
-
- return !((unsigned long) tp & PKT_IN_USE);
-}
-
-/*
-** To add a packet to the queue, you set the PKT_IN_USE bit in the address,
-** and then move the TxAdd pointer along one position to point to the next
-** packet pointer. You must wrap the pointer from the end back to the start.
-*/
-void add_transmit(struct Port *PortP)
-{
- if (readw(PortP->TxAdd) & PKT_IN_USE) {
- rio_dprintk(RIO_DEBUG_PARAM, "add_transmit: Packet has been stolen!");
- }
- writew(readw(PortP->TxAdd) | PKT_IN_USE, PortP->TxAdd);
- PortP->TxAdd = (PortP->TxAdd == PortP->TxEnd) ? PortP->TxStart : PortP->TxAdd + 1;
- writew(RIO_OFF(PortP->Caddr, PortP->TxAdd), &PortP->PhbP->tx_add);
-}
-
-/****************************************
- * Put a packet onto the end of the
- * free list
- ****************************************/
-void put_free_end(struct Host *HostP, struct PKT __iomem *PktP)
-{
- struct rio_free_list __iomem *tmp_pointer;
- unsigned short old_end, new_end;
- unsigned long flags;
-
- rio_spin_lock_irqsave(&HostP->HostLock, flags);
-
- /*************************************************
- * Put a packet back onto the back of the free list
- *
- ************************************************/
-
- rio_dprintk(RIO_DEBUG_PFE, "put_free_end(PktP=%p)\n", PktP);
-
- if ((old_end = readw(&HostP->ParmMapP->free_list_end)) != TPNULL) {
- new_end = RIO_OFF(HostP->Caddr, PktP);
- tmp_pointer = (struct rio_free_list __iomem *) RIO_PTR(HostP->Caddr, old_end);
- writew(new_end, &tmp_pointer->next);
- writew(old_end, &((struct rio_free_list __iomem *) PktP)->prev);
- writew(TPNULL, &((struct rio_free_list __iomem *) PktP)->next);
- writew(new_end, &HostP->ParmMapP->free_list_end);
- } else { /* First packet on the free list this should never happen! */
- rio_dprintk(RIO_DEBUG_PFE, "put_free_end(): This should never happen\n");
- writew(RIO_OFF(HostP->Caddr, PktP), &HostP->ParmMapP->free_list_end);
- tmp_pointer = (struct rio_free_list __iomem *) PktP;
- writew(TPNULL, &tmp_pointer->prev);
- writew(TPNULL, &tmp_pointer->next);
- }
- rio_dprintk(RIO_DEBUG_CMD, "Before unlock: %p\n", &HostP->HostLock);
- rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
-}
-
-/*
-** can_remove_receive(PktP,P) returns non-zero if PKT_IN_USE is set
-** for the next packet on the queue. It will also set PktP to point to the
-** relevant packet, [having cleared the PKT_IN_USE bit]. If PKT_IN_USE is clear,
-** then can_remove_receive() returns 0.
-*/
-int can_remove_receive(struct PKT __iomem **PktP, struct Port *PortP)
-{
- if (readw(PortP->RxRemove) & PKT_IN_USE) {
- *PktP = (struct PKT __iomem *) RIO_PTR(PortP->Caddr, readw(PortP->RxRemove) & ~PKT_IN_USE);
- return 1;
- }
- return 0;
-}
-
-/*
-** To remove a packet from the receive queue you clear its PKT_IN_USE bit,
-** and then bump the pointers. Once the pointers get to the end, they must
-** be wrapped back to the start.
-*/
-void remove_receive(struct Port *PortP)
-{
- writew(readw(PortP->RxRemove) & ~PKT_IN_USE, PortP->RxRemove);
- PortP->RxRemove = (PortP->RxRemove == PortP->RxEnd) ? PortP->RxStart : PortP->RxRemove + 1;
- writew(RIO_OFF(PortP->Caddr, PortP->RxRemove), &PortP->PhbP->rx_remove);
-}
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : rioroute.c
-** SID : 1.3
-** Last Modified : 11/6/98 10:33:46
-** Retrieved : 11/6/98 10:33:50
-**
-** ident @(#)rioroute.c 1.3
-**
-** -----------------------------------------------------------------------------
-*/
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-
-#include <linux/termios.h>
-#include <linux/serial.h>
-
-#include <linux/generic_serial.h>
-
-
-#include "linux_compat.h"
-#include "rio_linux.h"
-#include "pkt.h"
-#include "daemon.h"
-#include "rio.h"
-#include "riospace.h"
-#include "cmdpkt.h"
-#include "map.h"
-#include "rup.h"
-#include "port.h"
-#include "riodrvr.h"
-#include "rioinfo.h"
-#include "func.h"
-#include "errors.h"
-#include "pci.h"
-
-#include "parmmap.h"
-#include "unixrup.h"
-#include "board.h"
-#include "host.h"
-#include "phb.h"
-#include "link.h"
-#include "cmdblk.h"
-#include "route.h"
-#include "cirrus.h"
-#include "rioioctl.h"
-#include "param.h"
-
-static int RIOCheckIsolated(struct rio_info *, struct Host *, unsigned int);
-static int RIOIsolate(struct rio_info *, struct Host *, unsigned int);
-static int RIOCheck(struct Host *, unsigned int);
-static void RIOConCon(struct rio_info *, struct Host *, unsigned int, unsigned int, unsigned int, unsigned int, int);
-
-
-/*
-** Incoming on the ROUTE_RUP
-** I wrote this while I was tired. Forgive me.
-*/
-int RIORouteRup(struct rio_info *p, unsigned int Rup, struct Host *HostP, struct PKT __iomem * PacketP)
-{
- struct PktCmd __iomem *PktCmdP = (struct PktCmd __iomem *) PacketP->data;
- struct PktCmd_M *PktReplyP;
- struct CmdBlk *CmdBlkP;
- struct Port *PortP;
- struct Map *MapP;
- struct Top *TopP;
- int ThisLink, ThisLinkMin, ThisLinkMax;
- int port;
- int Mod, Mod1, Mod2;
- unsigned short RtaType;
- unsigned int RtaUniq;
- unsigned int ThisUnit, ThisUnit2; /* 2 ids to accommodate 16 port RTA */
- unsigned int OldUnit, NewUnit, OldLink, NewLink;
- char *MyType, *MyName;
- int Lies;
- unsigned long flags;
-
- /*
- ** Is this unit telling us it's current link topology?
- */
- if (readb(&PktCmdP->Command) == ROUTE_TOPOLOGY) {
- MapP = HostP->Mapping;
-
- /*
- ** The packet can be sent either by the host or by an RTA.
- ** If it comes from the host, then we need to fill in the
- ** Topology array in the host structure. If it came in
- ** from an RTA then we need to fill in the Mapping structure's
- ** Topology array for the unit.
- */
- if (Rup >= (unsigned short) MAX_RUP) {
- ThisUnit = HOST_ID;
- TopP = HostP->Topology;
- MyType = "Host";
- MyName = HostP->Name;
- ThisLinkMin = ThisLinkMax = Rup - MAX_RUP;
- } else {
- ThisUnit = Rup + 1;
- TopP = HostP->Mapping[Rup].Topology;
- MyType = "RTA";
- MyName = HostP->Mapping[Rup].Name;
- ThisLinkMin = 0;
- ThisLinkMax = LINKS_PER_UNIT - 1;
- }
-
- /*
- ** Lies will not be tolerated.
- ** If any pair of links claim to be connected to the same
- ** place, then ignore this packet completely.
- */
- Lies = 0;
- for (ThisLink = ThisLinkMin + 1; ThisLink <= ThisLinkMax; ThisLink++) {
- /*
- ** it won't lie about network interconnect, total disconnects
- ** and no-IDs. (or at least, it doesn't *matter* if it does)
- */
- if (readb(&PktCmdP->RouteTopology[ThisLink].Unit) > (unsigned short) MAX_RUP)
- continue;
-
- for (NewLink = ThisLinkMin; NewLink < ThisLink; NewLink++) {
- if ((readb(&PktCmdP->RouteTopology[ThisLink].Unit) == readb(&PktCmdP->RouteTopology[NewLink].Unit)) && (readb(&PktCmdP->RouteTopology[ThisLink].Link) == readb(&PktCmdP->RouteTopology[NewLink].Link))) {
- Lies++;
- }
- }
- }
-
- if (Lies) {
- rio_dprintk(RIO_DEBUG_ROUTE, "LIES! DAMN LIES! %d LIES!\n", Lies);
- rio_dprintk(RIO_DEBUG_ROUTE, "%d:%c %d:%c %d:%c %d:%c\n",
- readb(&PktCmdP->RouteTopology[0].Unit),
- 'A' + readb(&PktCmdP->RouteTopology[0].Link),
- readb(&PktCmdP->RouteTopology[1].Unit),
- 'A' + readb(&PktCmdP->RouteTopology[1].Link), readb(&PktCmdP->RouteTopology[2].Unit), 'A' + readb(&PktCmdP->RouteTopology[2].Link), readb(&PktCmdP->RouteTopology[3].Unit), 'A' + readb(&PktCmdP->RouteTopology[3].Link));
- return 1;
- }
-
- /*
- ** now, process each link.
- */
- for (ThisLink = ThisLinkMin; ThisLink <= ThisLinkMax; ThisLink++) {
- /*
- ** this is what it was connected to
- */
- OldUnit = TopP[ThisLink].Unit;
- OldLink = TopP[ThisLink].Link;
-
- /*
- ** this is what it is now connected to
- */
- NewUnit = readb(&PktCmdP->RouteTopology[ThisLink].Unit);
- NewLink = readb(&PktCmdP->RouteTopology[ThisLink].Link);
-
- if (OldUnit != NewUnit || OldLink != NewLink) {
- /*
- ** something has changed!
- */
-
- if (NewUnit > MAX_RUP && NewUnit != ROUTE_DISCONNECT && NewUnit != ROUTE_NO_ID && NewUnit != ROUTE_INTERCONNECT) {
- rio_dprintk(RIO_DEBUG_ROUTE, "I have a link from %s %s to unit %d:%d - I don't like it.\n", MyType, MyName, NewUnit, NewLink);
- } else {
- /*
- ** put the new values in
- */
- TopP[ThisLink].Unit = NewUnit;
- TopP[ThisLink].Link = NewLink;
-
- RIOSetChange(p);
-
- if (OldUnit <= MAX_RUP) {
- /*
- ** If something has become bust, then re-enable them messages
- */
- if (!p->RIONoMessage)
- RIOConCon(p, HostP, ThisUnit, ThisLink, OldUnit, OldLink, DISCONNECT);
- }
-
- if ((NewUnit <= MAX_RUP) && !p->RIONoMessage)
- RIOConCon(p, HostP, ThisUnit, ThisLink, NewUnit, NewLink, CONNECT);
-
- if (NewUnit == ROUTE_NO_ID)
- rio_dprintk(RIO_DEBUG_ROUTE, "%s %s (%c) is connected to an unconfigured unit.\n", MyType, MyName, 'A' + ThisLink);
-
- if (NewUnit == ROUTE_INTERCONNECT) {
- if (!p->RIONoMessage)
- printk(KERN_DEBUG "rio: %s '%s' (%c) is connected to another network.\n", MyType, MyName, 'A' + ThisLink);
- }
-
- /*
- ** perform an update for 'the other end', so that these messages
- ** only appears once. Only disconnect the other end if it is pointing
- ** at us!
- */
- if (OldUnit == HOST_ID) {
- if (HostP->Topology[OldLink].Unit == ThisUnit && HostP->Topology[OldLink].Link == ThisLink) {
- rio_dprintk(RIO_DEBUG_ROUTE, "SETTING HOST (%c) TO DISCONNECTED!\n", OldLink + 'A');
- HostP->Topology[OldLink].Unit = ROUTE_DISCONNECT;
- HostP->Topology[OldLink].Link = NO_LINK;
- } else {
- rio_dprintk(RIO_DEBUG_ROUTE, "HOST(%c) WAS NOT CONNECTED TO %s (%c)!\n", OldLink + 'A', HostP->Mapping[ThisUnit - 1].Name, ThisLink + 'A');
- }
- } else if (OldUnit <= MAX_RUP) {
- if (HostP->Mapping[OldUnit - 1].Topology[OldLink].Unit == ThisUnit && HostP->Mapping[OldUnit - 1].Topology[OldLink].Link == ThisLink) {
- rio_dprintk(RIO_DEBUG_ROUTE, "SETTING RTA %s (%c) TO DISCONNECTED!\n", HostP->Mapping[OldUnit - 1].Name, OldLink + 'A');
- HostP->Mapping[OldUnit - 1].Topology[OldLink].Unit = ROUTE_DISCONNECT;
- HostP->Mapping[OldUnit - 1].Topology[OldLink].Link = NO_LINK;
- } else {
- rio_dprintk(RIO_DEBUG_ROUTE, "RTA %s (%c) WAS NOT CONNECTED TO %s (%c)\n", HostP->Mapping[OldUnit - 1].Name, OldLink + 'A', HostP->Mapping[ThisUnit - 1].Name, ThisLink + 'A');
- }
- }
- if (NewUnit == HOST_ID) {
- rio_dprintk(RIO_DEBUG_ROUTE, "MARKING HOST (%c) CONNECTED TO %s (%c)\n", NewLink + 'A', MyName, ThisLink + 'A');
- HostP->Topology[NewLink].Unit = ThisUnit;
- HostP->Topology[NewLink].Link = ThisLink;
- } else if (NewUnit <= MAX_RUP) {
- rio_dprintk(RIO_DEBUG_ROUTE, "MARKING RTA %s (%c) CONNECTED TO %s (%c)\n", HostP->Mapping[NewUnit - 1].Name, NewLink + 'A', MyName, ThisLink + 'A');
- HostP->Mapping[NewUnit - 1].Topology[NewLink].Unit = ThisUnit;
- HostP->Mapping[NewUnit - 1].Topology[NewLink].Link = ThisLink;
- }
- }
- RIOSetChange(p);
- RIOCheckIsolated(p, HostP, OldUnit);
- }
- }
- return 1;
- }
-
- /*
- ** The only other command we recognise is a route_request command
- */
- if (readb(&PktCmdP->Command) != ROUTE_REQUEST) {
- rio_dprintk(RIO_DEBUG_ROUTE, "Unknown command %d received on rup %d host %p ROUTE_RUP\n", readb(&PktCmdP->Command), Rup, HostP);
- return 1;
- }
-
- RtaUniq = (readb(&PktCmdP->UniqNum[0])) + (readb(&PktCmdP->UniqNum[1]) << 8) + (readb(&PktCmdP->UniqNum[2]) << 16) + (readb(&PktCmdP->UniqNum[3]) << 24);
-
- /*
- ** Determine if 8 or 16 port RTA
- */
- RtaType = GetUnitType(RtaUniq);
-
- rio_dprintk(RIO_DEBUG_ROUTE, "Received a request for an ID for serial number %x\n", RtaUniq);
-
- Mod = readb(&PktCmdP->ModuleTypes);
- Mod1 = LONYBLE(Mod);
- if (RtaType == TYPE_RTA16) {
- /*
- ** Only one ident is set for a 16 port RTA. To make compatible
- ** with 8 port, set 2nd ident in Mod2 to the same as Mod1.
- */
- Mod2 = Mod1;
- rio_dprintk(RIO_DEBUG_ROUTE, "Backplane type is %s (all ports)\n", p->RIOModuleTypes[Mod1].Name);
- } else {
- Mod2 = HINYBLE(Mod);
- rio_dprintk(RIO_DEBUG_ROUTE, "Module types are %s (ports 0-3) and %s (ports 4-7)\n", p->RIOModuleTypes[Mod1].Name, p->RIOModuleTypes[Mod2].Name);
- }
-
- /*
- ** try to unhook a command block from the command free list.
- */
- if (!(CmdBlkP = RIOGetCmdBlk())) {
- rio_dprintk(RIO_DEBUG_ROUTE, "No command blocks to route RTA! come back later.\n");
- return 0;
- }
-
- /*
- ** Fill in the default info on the command block
- */
- CmdBlkP->Packet.dest_unit = Rup;
- CmdBlkP->Packet.dest_port = ROUTE_RUP;
- CmdBlkP->Packet.src_unit = HOST_ID;
- CmdBlkP->Packet.src_port = ROUTE_RUP;
- CmdBlkP->Packet.len = PKT_CMD_BIT | 1;
- CmdBlkP->PreFuncP = CmdBlkP->PostFuncP = NULL;
- PktReplyP = (struct PktCmd_M *) CmdBlkP->Packet.data;
-
- if (!RIOBootOk(p, HostP, RtaUniq)) {
- rio_dprintk(RIO_DEBUG_ROUTE, "RTA %x tried to get an ID, but does not belong - FOAD it!\n", RtaUniq);
- PktReplyP->Command = ROUTE_FOAD;
- memcpy(PktReplyP->CommandText, "RT_FOAD", 7);
- RIOQueueCmdBlk(HostP, Rup, CmdBlkP);
- return 1;
- }
-
- /*
- ** Check to see if the RTA is configured for this host
- */
- for (ThisUnit = 0; ThisUnit < MAX_RUP; ThisUnit++) {
- rio_dprintk(RIO_DEBUG_ROUTE, "Entry %d Flags=%s %s UniqueNum=0x%x\n",
- ThisUnit, HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE ? "Slot-In-Use" : "Not In Use", HostP->Mapping[ThisUnit].Flags & SLOT_TENTATIVE ? "Slot-Tentative" : "Not Tentative", HostP->Mapping[ThisUnit].RtaUniqueNum);
-
- /*
- ** We have an entry for it.
- */
- if ((HostP->Mapping[ThisUnit].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) && (HostP->Mapping[ThisUnit].RtaUniqueNum == RtaUniq)) {
- if (RtaType == TYPE_RTA16) {
- ThisUnit2 = HostP->Mapping[ThisUnit].ID2 - 1;
- rio_dprintk(RIO_DEBUG_ROUTE, "Found unit 0x%x at slots %d+%d\n", RtaUniq, ThisUnit, ThisUnit2);
- } else
- rio_dprintk(RIO_DEBUG_ROUTE, "Found unit 0x%x at slot %d\n", RtaUniq, ThisUnit);
- /*
- ** If we have no knowledge of booting it, then the host has
- ** been re-booted, and so we must kill the RTA, so that it
- ** will be booted again (potentially with new bins)
- ** and it will then re-ask for an ID, which we will service.
- */
- if ((HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE) && !(HostP->Mapping[ThisUnit].Flags & RTA_BOOTED)) {
- if (!(HostP->Mapping[ThisUnit].Flags & MSG_DONE)) {
- if (!p->RIONoMessage)
- printk(KERN_DEBUG "rio: RTA '%s' is being updated.\n", HostP->Mapping[ThisUnit].Name);
- HostP->Mapping[ThisUnit].Flags |= MSG_DONE;
- }
- PktReplyP->Command = ROUTE_FOAD;
- memcpy(PktReplyP->CommandText, "RT_FOAD", 7);
- RIOQueueCmdBlk(HostP, Rup, CmdBlkP);
- return 1;
- }
-
- /*
- ** Send the ID (entry) to this RTA. The ID number is implicit as
- ** the offset into the table. It is worth noting at this stage
- ** that offset zero in the table contains the entries for the
- ** RTA with ID 1!!!!
- */
- PktReplyP->Command = ROUTE_ALLOCATE;
- PktReplyP->IDNum = ThisUnit + 1;
- if (RtaType == TYPE_RTA16) {
- if (HostP->Mapping[ThisUnit].Flags & SLOT_IN_USE)
- /*
- ** Adjust the phb and tx pkt dest_units for 2nd block of 8
- ** only if the RTA has ports associated (SLOT_IN_USE)
- */
- RIOFixPhbs(p, HostP, ThisUnit2);
- PktReplyP->IDNum2 = ThisUnit2 + 1;
- rio_dprintk(RIO_DEBUG_ROUTE, "RTA '%s' has been allocated IDs %d+%d\n", HostP->Mapping[ThisUnit].Name, PktReplyP->IDNum, PktReplyP->IDNum2);
- } else {
- PktReplyP->IDNum2 = ROUTE_NO_ID;
- rio_dprintk(RIO_DEBUG_ROUTE, "RTA '%s' has been allocated ID %d\n", HostP->Mapping[ThisUnit].Name, PktReplyP->IDNum);
- }
- memcpy(PktReplyP->CommandText, "RT_ALLOCAT", 10);
-
- RIOQueueCmdBlk(HostP, Rup, CmdBlkP);
-
- /*
- ** If this is a freshly booted RTA, then we need to re-open
- ** the ports, if any where open, so that data may once more
- ** flow around the system!
- */
- if ((HostP->Mapping[ThisUnit].Flags & RTA_NEWBOOT) && (HostP->Mapping[ThisUnit].SysPort != NO_PORT)) {
- /*
- ** look at the ports associated with this beast and
- ** see if any where open. If they was, then re-open
- ** them, using the info from the tty flags.
- */
- for (port = 0; port < PORTS_PER_RTA; port++) {
- PortP = p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort];
- if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) {
- rio_dprintk(RIO_DEBUG_ROUTE, "Re-opened this port\n");
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- PortP->MagicFlags |= MAGIC_REBOOT;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- }
- }
- if (RtaType == TYPE_RTA16) {
- for (port = 0; port < PORTS_PER_RTA; port++) {
- PortP = p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort];
- if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) {
- rio_dprintk(RIO_DEBUG_ROUTE, "Re-opened this port\n");
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- PortP->MagicFlags |= MAGIC_REBOOT;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- }
- }
- }
- }
-
- /*
- ** keep a copy of the module types!
- */
- HostP->UnixRups[ThisUnit].ModTypes = Mod;
- if (RtaType == TYPE_RTA16)
- HostP->UnixRups[ThisUnit2].ModTypes = Mod;
-
- /*
- ** If either of the modules on this unit is read-only or write-only
- ** or none-xprint, then we need to transfer that info over to the
- ** relevant ports.
- */
- if (HostP->Mapping[ThisUnit].SysPort != NO_PORT) {
- for (port = 0; port < PORTS_PER_MODULE; port++) {
- p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK;
- p->RIOPortp[port + HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port];
- p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit].SysPort]->Config &= ~RIO_NOMASK;
- p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port];
- }
- if (RtaType == TYPE_RTA16) {
- for (port = 0; port < PORTS_PER_MODULE; port++) {
- p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK;
- p->RIOPortp[port + HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod1].Flags[port];
- p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit2].SysPort]->Config &= ~RIO_NOMASK;
- p->RIOPortp[port + PORTS_PER_MODULE + HostP->Mapping[ThisUnit2].SysPort]->Config |= p->RIOModuleTypes[Mod2].Flags[port];
- }
- }
- }
-
- /*
- ** Job done, get on with the interrupts!
- */
- return 1;
- }
- }
- /*
- ** There is no table entry for this RTA at all.
- **
- ** Lets check to see if we actually booted this unit - if not,
- ** then we reset it and it will go round the loop of being booted
- ** we can then worry about trying to fit it into the table.
- */
- for (ThisUnit = 0; ThisUnit < HostP->NumExtraBooted; ThisUnit++)
- if (HostP->ExtraUnits[ThisUnit] == RtaUniq)
- break;
- if (ThisUnit == HostP->NumExtraBooted && ThisUnit != MAX_EXTRA_UNITS) {
- /*
- ** if the unit wasn't in the table, and the table wasn't full, then
- ** we reset the unit, because we didn't boot it.
- ** However, if the table is full, it could be that we did boot
- ** this unit, and so we won't reboot it, because it isn't really
- ** all that disastrous to keep the old bins in most cases. This
- ** is a rather tacky feature, but we are on the edge of reallity
- ** here, because the implication is that someone has connected
- ** 16+MAX_EXTRA_UNITS onto one host.
- */
- static int UnknownMesgDone = 0;
-
- if (!UnknownMesgDone) {
- if (!p->RIONoMessage)
- printk(KERN_DEBUG "rio: One or more unknown RTAs are being updated.\n");
- UnknownMesgDone = 1;
- }
-
- PktReplyP->Command = ROUTE_FOAD;
- memcpy(PktReplyP->CommandText, "RT_FOAD", 7);
- } else {
- /*
- ** we did boot it (as an extra), and there may now be a table
- ** slot free (because of a delete), so we will try to make
- ** a tentative entry for it, so that the configurator can see it
- ** and fill in the details for us.
- */
- if (RtaType == TYPE_RTA16) {
- if (RIOFindFreeID(p, HostP, &ThisUnit, &ThisUnit2) == 0) {
- RIODefaultName(p, HostP, ThisUnit);
- rio_fill_host_slot(ThisUnit, ThisUnit2, RtaUniq, HostP);
- }
- } else {
- if (RIOFindFreeID(p, HostP, &ThisUnit, NULL) == 0) {
- RIODefaultName(p, HostP, ThisUnit);
- rio_fill_host_slot(ThisUnit, 0, RtaUniq, HostP);
- }
- }
- PktReplyP->Command = ROUTE_USED;
- memcpy(PktReplyP->CommandText, "RT_USED", 7);
- }
- RIOQueueCmdBlk(HostP, Rup, CmdBlkP);
- return 1;
-}
-
-
-void RIOFixPhbs(struct rio_info *p, struct Host *HostP, unsigned int unit)
-{
- unsigned short link, port;
- struct Port *PortP;
- unsigned long flags;
- int PortN = HostP->Mapping[unit].SysPort;
-
- rio_dprintk(RIO_DEBUG_ROUTE, "RIOFixPhbs unit %d sysport %d\n", unit, PortN);
-
- if (PortN != -1) {
- unsigned short dest_unit = HostP->Mapping[unit].ID2;
-
- /*
- ** Get the link number used for the 1st 8 phbs on this unit.
- */
- PortP = p->RIOPortp[HostP->Mapping[dest_unit - 1].SysPort];
-
- link = readw(&PortP->PhbP->link);
-
- for (port = 0; port < PORTS_PER_RTA; port++, PortN++) {
- unsigned short dest_port = port + 8;
- u16 __iomem *TxPktP;
- struct PKT __iomem *Pkt;
-
- PortP = p->RIOPortp[PortN];
-
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- /*
- ** If RTA is not powered on, the tx packets will be
- ** unset, so go no further.
- */
- if (!PortP->TxStart) {
- rio_dprintk(RIO_DEBUG_ROUTE, "Tx pkts not set up yet\n");
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- break;
- }
-
- /*
- ** For the second slot of a 16 port RTA, the driver needs to
- ** sort out the phb to port mappings. The dest_unit for this
- ** group of 8 phbs is set to the dest_unit of the accompanying
- ** 8 port block. The dest_port of the second unit is set to
- ** be in the range 8-15 (i.e. 8 is added). Thus, for a 16 port
- ** RTA with IDs 5 and 6, traffic bound for port 6 of unit 6
- ** (being the second map ID) will be sent to dest_unit 5, port
- ** 14. When this RTA is deleted, dest_unit for ID 6 will be
- ** restored, and the dest_port will be reduced by 8.
- ** Transmit packets also have a destination field which needs
- ** adjusting in the same manner.
- ** Note that the unit/port bytes in 'dest' are swapped.
- ** We also need to adjust the phb and rup link numbers for the
- ** second block of 8 ttys.
- */
- for (TxPktP = PortP->TxStart; TxPktP <= PortP->TxEnd; TxPktP++) {
- /*
- ** *TxPktP is the pointer to the transmit packet on the host
- ** card. This needs to be translated into a 32 bit pointer
- ** so it can be accessed from the driver.
- */
- Pkt = (struct PKT __iomem *) RIO_PTR(HostP->Caddr, readw(TxPktP));
-
- /*
- ** If the packet is used, reset it.
- */
- Pkt = (struct PKT __iomem *) ((unsigned long) Pkt & ~PKT_IN_USE);
- writeb(dest_unit, &Pkt->dest_unit);
- writeb(dest_port, &Pkt->dest_port);
- }
- rio_dprintk(RIO_DEBUG_ROUTE, "phb dest: Old %x:%x New %x:%x\n", readw(&PortP->PhbP->destination) & 0xff, (readw(&PortP->PhbP->destination) >> 8) & 0xff, dest_unit, dest_port);
- writew(dest_unit + (dest_port << 8), &PortP->PhbP->destination);
- writew(link, &PortP->PhbP->link);
-
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- }
- /*
- ** Now make sure the range of ports to be serviced includes
- ** the 2nd 8 on this 16 port RTA.
- */
- if (link > 3)
- return;
- if (((unit * 8) + 7) > readw(&HostP->LinkStrP[link].last_port)) {
- rio_dprintk(RIO_DEBUG_ROUTE, "last port on host link %d: %d\n", link, (unit * 8) + 7);
- writew((unit * 8) + 7, &HostP->LinkStrP[link].last_port);
- }
- }
-}
-
-/*
-** Check to see if the new disconnection has isolated this unit.
-** If it has, then invalidate all its link information, and tell
-** the world about it. This is done to ensure that the configurator
-** only gets up-to-date information about what is going on.
-*/
-static int RIOCheckIsolated(struct rio_info *p, struct Host *HostP, unsigned int UnitId)
-{
- unsigned long flags;
- rio_spin_lock_irqsave(&HostP->HostLock, flags);
-
- if (RIOCheck(HostP, UnitId)) {
- rio_dprintk(RIO_DEBUG_ROUTE, "Unit %d is NOT isolated\n", UnitId);
- rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
- return (0);
- }
-
- RIOIsolate(p, HostP, UnitId);
- RIOSetChange(p);
- rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
- return 1;
-}
-
-/*
-** Invalidate all the link interconnectivity of this unit, and of
-** all the units attached to it. This will mean that the entire
-** subnet will re-introduce itself.
-*/
-static int RIOIsolate(struct rio_info *p, struct Host *HostP, unsigned int UnitId)
-{
- unsigned int link, unit;
-
- UnitId--; /* this trick relies on the Unit Id being UNSIGNED! */
-
- if (UnitId >= MAX_RUP) /* dontcha just lurv unsigned maths! */
- return (0);
-
- if (HostP->Mapping[UnitId].Flags & BEEN_HERE)
- return (0);
-
- HostP->Mapping[UnitId].Flags |= BEEN_HERE;
-
- if (p->RIOPrintDisabled == DO_PRINT)
- rio_dprintk(RIO_DEBUG_ROUTE, "RIOMesgIsolated %s", HostP->Mapping[UnitId].Name);
-
- for (link = 0; link < LINKS_PER_UNIT; link++) {
- unit = HostP->Mapping[UnitId].Topology[link].Unit;
- HostP->Mapping[UnitId].Topology[link].Unit = ROUTE_DISCONNECT;
- HostP->Mapping[UnitId].Topology[link].Link = NO_LINK;
- RIOIsolate(p, HostP, unit);
- }
- HostP->Mapping[UnitId].Flags &= ~BEEN_HERE;
- return 1;
-}
-
-static int RIOCheck(struct Host *HostP, unsigned int UnitId)
-{
- unsigned char link;
-
-/* rio_dprint(RIO_DEBUG_ROUTE, ("Check to see if unit %d has a route to the host\n",UnitId)); */
- rio_dprintk(RIO_DEBUG_ROUTE, "RIOCheck : UnitID = %d\n", UnitId);
-
- if (UnitId == HOST_ID) {
- /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is NOT isolated - it IS the host!\n", UnitId)); */
- return 1;
- }
-
- UnitId--;
-
- if (UnitId >= MAX_RUP) {
- /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d - ignored.\n", UnitId)); */
- return 0;
- }
-
- for (link = 0; link < LINKS_PER_UNIT; link++) {
- if (HostP->Mapping[UnitId].Topology[link].Unit == HOST_ID) {
- /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is connected directly to host via link (%c).\n",
- UnitId, 'A'+link)); */
- return 1;
- }
- }
-
- if (HostP->Mapping[UnitId].Flags & BEEN_HERE) {
- /* rio_dprint(RIO_DEBUG_ROUTE, ("Been to Unit %d before - ignoring\n", UnitId)); */
- return 0;
- }
-
- HostP->Mapping[UnitId].Flags |= BEEN_HERE;
-
- for (link = 0; link < LINKS_PER_UNIT; link++) {
- /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d check link (%c)\n", UnitId,'A'+link)); */
- if (RIOCheck(HostP, HostP->Mapping[UnitId].Topology[link].Unit)) {
- /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d is connected to something that knows the host via link (%c)\n", UnitId,link+'A')); */
- HostP->Mapping[UnitId].Flags &= ~BEEN_HERE;
- return 1;
- }
- }
-
- HostP->Mapping[UnitId].Flags &= ~BEEN_HERE;
-
- /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d DOESN'T KNOW THE HOST!\n", UnitId)); */
-
- return 0;
-}
-
-/*
-** Returns the type of unit (host, 16/8 port RTA)
-*/
-
-unsigned int GetUnitType(unsigned int Uniq)
-{
- switch ((Uniq >> 28) & 0xf) {
- case RIO_AT:
- case RIO_MCA:
- case RIO_EISA:
- case RIO_PCI:
- rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: Host\n");
- return (TYPE_HOST);
- case RIO_RTA_16:
- rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: 16 port RTA\n");
- return (TYPE_RTA16);
- case RIO_RTA:
- rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: 8 port RTA\n");
- return (TYPE_RTA8);
- default:
- rio_dprintk(RIO_DEBUG_ROUTE, "Unit type: Unrecognised\n");
- return (99);
- }
-}
-
-int RIOSetChange(struct rio_info *p)
-{
- if (p->RIOQuickCheck != NOT_CHANGED)
- return (0);
- p->RIOQuickCheck = CHANGED;
- if (p->RIOSignalProcess) {
- rio_dprintk(RIO_DEBUG_ROUTE, "Send SIG-HUP");
- /*
- psignal( RIOSignalProcess, SIGHUP );
- */
- }
- return (0);
-}
-
-static void RIOConCon(struct rio_info *p,
- struct Host *HostP,
- unsigned int FromId,
- unsigned int FromLink,
- unsigned int ToId,
- unsigned int ToLink,
- int Change)
-{
- char *FromName;
- char *FromType;
- char *ToName;
- char *ToType;
- unsigned int tp;
-
-/*
-** 15.10.1998 ARG - ESIL 0759
-** (Part) fix for port being trashed when opened whilst RTA "disconnected"
-**
-** What's this doing in here anyway ?
-** It was causing the port to be 'unmapped' if opened whilst RTA "disconnected"
-**
-** 09.12.1998 ARG - ESIL 0776 - part fix
-** Okay, We've found out what this was all about now !
-** Someone had botched this to use RIOHalted to indicated the number of RTAs
-** 'disconnected'. The value in RIOHalted was then being used in the
-** 'RIO_QUICK_CHECK' ioctl. A none zero value indicating that a least one RTA
-** is 'disconnected'. The change was put in to satisfy a customer's needs.
-** Having taken this bit of code out 'RIO_QUICK_CHECK' now no longer works for
-** the customer.
-**
- if (Change == CONNECT) {
- if (p->RIOHalted) p->RIOHalted --;
- }
- else {
- p->RIOHalted ++;
- }
-**
-** So - we need to implement it slightly differently - a new member of the
-** rio_info struct - RIORtaDisCons (RIO RTA connections) keeps track of RTA
-** connections and disconnections.
-*/
- if (Change == CONNECT) {
- if (p->RIORtaDisCons)
- p->RIORtaDisCons--;
- } else {
- p->RIORtaDisCons++;
- }
-
- if (p->RIOPrintDisabled == DONT_PRINT)
- return;
-
- if (FromId > ToId) {
- tp = FromId;
- FromId = ToId;
- ToId = tp;
- tp = FromLink;
- FromLink = ToLink;
- ToLink = tp;
- }
-
- FromName = FromId ? HostP->Mapping[FromId - 1].Name : HostP->Name;
- FromType = FromId ? "RTA" : "HOST";
- ToName = ToId ? HostP->Mapping[ToId - 1].Name : HostP->Name;
- ToType = ToId ? "RTA" : "HOST";
-
- rio_dprintk(RIO_DEBUG_ROUTE, "Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", FromType, FromName, 'A' + FromLink, ToType, ToName, 'A' + ToLink, (Change == CONNECT) ? "established" : "disconnected");
- printk(KERN_DEBUG "rio: Link between %s '%s' (%c) and %s '%s' (%c) %s.\n", FromType, FromName, 'A' + FromLink, ToType, ToName, 'A' + ToLink, (Change == CONNECT) ? "established" : "disconnected");
-}
-
-/*
-** RIORemoveFromSavedTable :
-**
-** Delete and RTA entry from the saved table given to us
-** by the configuration program.
-*/
-static int RIORemoveFromSavedTable(struct rio_info *p, struct Map *pMap)
-{
- int entry;
-
- /*
- ** We loop for all entries even after finding an entry and
- ** zeroing it because we may have two entries to delete if
- ** it's a 16 port RTA.
- */
- for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) {
- if (p->RIOSavedTable[entry].RtaUniqueNum == pMap->RtaUniqueNum) {
- memset(&p->RIOSavedTable[entry], 0, sizeof(struct Map));
- }
- }
- return 0;
-}
-
-
-/*
-** RIOCheckDisconnected :
-**
-** Scan the unit links to and return zero if the unit is completely
-** disconnected.
-*/
-static int RIOFreeDisconnected(struct rio_info *p, struct Host *HostP, int unit)
-{
- int link;
-
-
- rio_dprintk(RIO_DEBUG_ROUTE, "RIOFreeDisconnect unit %d\n", unit);
- /*
- ** If the slot is tentative and does not belong to the
- ** second half of a 16 port RTA then scan to see if
- ** is disconnected.
- */
- for (link = 0; link < LINKS_PER_UNIT; link++) {
- if (HostP->Mapping[unit].Topology[link].Unit != ROUTE_DISCONNECT)
- break;
- }
-
- /*
- ** If not all links are disconnected then we can forget about it.
- */
- if (link < LINKS_PER_UNIT)
- return 1;
-
-#ifdef NEED_TO_FIX_THIS
- /* Ok so all the links are disconnected. But we may have only just
- ** made this slot tentative and not yet received a topology update.
- ** Lets check how long ago we made it tentative.
- */
- rio_dprintk(RIO_DEBUG_ROUTE, "Just about to check LBOLT on entry %d\n", unit);
- if (drv_getparm(LBOLT, (ulong_t *) & current_time))
- rio_dprintk(RIO_DEBUG_ROUTE, "drv_getparm(LBOLT,....) Failed.\n");
-
- elapse_time = current_time - TentTime[unit];
- rio_dprintk(RIO_DEBUG_ROUTE, "elapse %d = current %d - tent %d (%d usec)\n", elapse_time, current_time, TentTime[unit], drv_hztousec(elapse_time));
- if (drv_hztousec(elapse_time) < WAIT_TO_FINISH) {
- rio_dprintk(RIO_DEBUG_ROUTE, "Skipping slot %d, not timed out yet %d\n", unit, drv_hztousec(elapse_time));
- return 1;
- }
-#endif
-
- /*
- ** We have found an usable slot.
- ** If it is half of a 16 port RTA then delete the other half.
- */
- if (HostP->Mapping[unit].ID2 != 0) {
- int nOther = (HostP->Mapping[unit].ID2) - 1;
-
- rio_dprintk(RIO_DEBUG_ROUTE, "RioFreedis second slot %d.\n", nOther);
- memset(&HostP->Mapping[nOther], 0, sizeof(struct Map));
- }
- RIORemoveFromSavedTable(p, &HostP->Mapping[unit]);
-
- return 0;
-}
-
-
-/*
-** RIOFindFreeID :
-**
-** This function scans the given host table for either one
-** or two free unit ID's.
-*/
-
-int RIOFindFreeID(struct rio_info *p, struct Host *HostP, unsigned int * pID1, unsigned int * pID2)
-{
- int unit, tempID;
-
- /*
- ** Initialise the ID's to MAX_RUP.
- ** We do this to make the loop for setting the ID's as simple as
- ** possible.
- */
- *pID1 = MAX_RUP;
- if (pID2 != NULL)
- *pID2 = MAX_RUP;
-
- /*
- ** Scan all entries of the host mapping table for free slots.
- ** We scan for free slots first and then if that is not successful
- ** we start all over again looking for tentative slots we can re-use.
- */
- for (unit = 0; unit < MAX_RUP; unit++) {
- rio_dprintk(RIO_DEBUG_ROUTE, "Scanning unit %d\n", unit);
- /*
- ** If the flags are zero then the slot is empty.
- */
- if (HostP->Mapping[unit].Flags == 0) {
- rio_dprintk(RIO_DEBUG_ROUTE, " This slot is empty.\n");
- /*
- ** If we haven't allocated the first ID then do it now.
- */
- if (*pID1 == MAX_RUP) {
- rio_dprintk(RIO_DEBUG_ROUTE, "Make tentative entry for first unit %d\n", unit);
- *pID1 = unit;
-
- /*
- ** If the second ID is not needed then we can return
- ** now.
- */
- if (pID2 == NULL)
- return 0;
- } else {
- /*
- ** Allocate the second slot and return.
- */
- rio_dprintk(RIO_DEBUG_ROUTE, "Make tentative entry for second unit %d\n", unit);
- *pID2 = unit;
- return 0;
- }
- }
- }
-
- /*
- ** If we manage to come out of the free slot loop then we
- ** need to start all over again looking for tentative slots
- ** that we can re-use.
- */
- rio_dprintk(RIO_DEBUG_ROUTE, "Starting to scan for tentative slots\n");
- for (unit = 0; unit < MAX_RUP; unit++) {
- if (((HostP->Mapping[unit].Flags & SLOT_TENTATIVE) || (HostP->Mapping[unit].Flags == 0)) && !(HostP->Mapping[unit].Flags & RTA16_SECOND_SLOT)) {
- rio_dprintk(RIO_DEBUG_ROUTE, " Slot %d looks promising.\n", unit);
-
- if (unit == *pID1) {
- rio_dprintk(RIO_DEBUG_ROUTE, " No it isn't, its the 1st half\n");
- continue;
- }
-
- /*
- ** Slot is Tentative or Empty, but not a tentative second
- ** slot of a 16 porter.
- ** Attempt to free up this slot (and its parnter if
- ** it is a 16 port slot. The second slot will become
- ** empty after a call to RIOFreeDisconnected so thats why
- ** we look for empty slots above as well).
- */
- if (HostP->Mapping[unit].Flags != 0)
- if (RIOFreeDisconnected(p, HostP, unit) != 0)
- continue;
- /*
- ** If we haven't allocated the first ID then do it now.
- */
- if (*pID1 == MAX_RUP) {
- rio_dprintk(RIO_DEBUG_ROUTE, "Grab tentative entry for first unit %d\n", unit);
- *pID1 = unit;
-
- /*
- ** Clear out this slot now that we intend to use it.
- */
- memset(&HostP->Mapping[unit], 0, sizeof(struct Map));
-
- /*
- ** If the second ID is not needed then we can return
- ** now.
- */
- if (pID2 == NULL)
- return 0;
- } else {
- /*
- ** Allocate the second slot and return.
- */
- rio_dprintk(RIO_DEBUG_ROUTE, "Grab tentative/empty entry for second unit %d\n", unit);
- *pID2 = unit;
-
- /*
- ** Clear out this slot now that we intend to use it.
- */
- memset(&HostP->Mapping[unit], 0, sizeof(struct Map));
-
- /* At this point under the right(wrong?) conditions
- ** we may have a first unit ID being higher than the
- ** second unit ID. This is a bad idea if we are about
- ** to fill the slots with a 16 port RTA.
- ** Better check and swap them over.
- */
-
- if (*pID1 > *pID2) {
- rio_dprintk(RIO_DEBUG_ROUTE, "Swapping IDS %d %d\n", *pID1, *pID2);
- tempID = *pID1;
- *pID1 = *pID2;
- *pID2 = tempID;
- }
- return 0;
- }
- }
- }
-
- /*
- ** If we manage to get to the end of the second loop then we
- ** can give up and return a failure.
- */
- return 1;
-}
-
-
-/*
-** The link switch scenario.
-**
-** Rta Wun (A) is connected to Tuw (A).
-** The tables are all up to date, and the system is OK.
-**
-** If Wun (A) is now moved to Wun (B) before Wun (A) can
-** become disconnected, then the follow happens:
-**
-** Tuw (A) spots the change of unit:link at the other end
-** of its link and Tuw sends a topology packet reflecting
-** the change: Tuw (A) now disconnected from Wun (A), and
-** this is closely followed by a packet indicating that
-** Tuw (A) is now connected to Wun (B).
-**
-** Wun (B) will spot that it has now become connected, and
-** Wun will send a topology packet, which indicates that
-** both Wun (A) and Wun (B) is connected to Tuw (A).
-**
-** Eventually Wun (A) realises that it is now disconnected
-** and Wun will send out a topology packet indicating that
-** Wun (A) is now disconnected.
-*/
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : riospace.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:13
-** Retrieved : 11/6/98 11:34:22
-**
-** ident @(#)riospace.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_riospace_h__
-#define __rio_riospace_h__
-
-#define RIO_LOCATOR_LEN 16
-#define MAX_RIO_BOARDS 4
-
-/*
-** DONT change this file. At all. Unless you can rebuild the entire
-** device driver, which you probably can't, then the rest of the
-** driver won't see any changes you make here. So don't make any.
-** In particular, it won't be able to see changes to RIO_SLOTS
-*/
-
-struct Conf {
- char Locator[24];
- unsigned int StartupTime;
- unsigned int SlowCook;
- unsigned int IntrPollTime;
- unsigned int BreakInterval;
- unsigned int Timer;
- unsigned int RtaLoadBase;
- unsigned int HostLoadBase;
- unsigned int XpHz;
- unsigned int XpCps;
- char *XpOn;
- char *XpOff;
- unsigned int MaxXpCps;
- unsigned int MinXpCps;
- unsigned int SpinCmds;
- unsigned int FirstAddr;
- unsigned int LastAddr;
- unsigned int BufferSize;
- unsigned int LowWater;
- unsigned int LineLength;
- unsigned int CmdTime;
-};
-
-/*
-** Board types - these MUST correspond to product codes!
-*/
-#define RIO_EMPTY 0x0
-#define RIO_EISA 0x3
-#define RIO_RTA_16 0x9
-#define RIO_AT 0xA
-#define RIO_MCA 0xB
-#define RIO_PCI 0xD
-#define RIO_RTA 0xE
-
-/*
-** Board data structure. This is used for configuration info
-*/
-struct Brd {
- unsigned char Type; /* RIO_EISA, RIO_MCA, RIO_AT, RIO_EMPTY... */
- unsigned char Ivec; /* POLLED or ivec number */
- unsigned char Mode; /* Control stuff, see below */
-};
-
-struct Board {
- char Locator[RIO_LOCATOR_LEN];
- int NumSlots;
- struct Brd Boards[MAX_RIO_BOARDS];
-};
-
-#define BOOT_FROM_LINK 0x00
-#define BOOT_FROM_RAM 0x01
-#define EXTERNAL_BUS_OFF 0x00
-#define EXTERNAL_BUS_ON 0x02
-#define INTERRUPT_DISABLE 0x00
-#define INTERRUPT_ENABLE 0x04
-#define BYTE_OPERATION 0x00
-#define WORD_OPERATION 0x08
-#define POLLED INTERRUPT_DISABLE
-#define IRQ_15 (0x00 | INTERRUPT_ENABLE)
-#define IRQ_12 (0x10 | INTERRUPT_ENABLE)
-#define IRQ_11 (0x20 | INTERRUPT_ENABLE)
-#define IRQ_9 (0x30 | INTERRUPT_ENABLE)
-#define SLOW_LINKS 0x00
-#define FAST_LINKS 0x40
-#define SLOW_AT_BUS 0x00
-#define FAST_AT_BUS 0x80
-#define SLOW_PCI_TP 0x00
-#define FAST_PCI_TP 0x80
-/*
-** Debug levels
-*/
-#define DBG_NONE 0x00000000
-
-#define DBG_INIT 0x00000001
-#define DBG_OPEN 0x00000002
-#define DBG_CLOSE 0x00000004
-#define DBG_IOCTL 0x00000008
-
-#define DBG_READ 0x00000010
-#define DBG_WRITE 0x00000020
-#define DBG_INTR 0x00000040
-#define DBG_PROC 0x00000080
-
-#define DBG_PARAM 0x00000100
-#define DBG_CMD 0x00000200
-#define DBG_XPRINT 0x00000400
-#define DBG_POLL 0x00000800
-
-#define DBG_DAEMON 0x00001000
-#define DBG_FAIL 0x00002000
-#define DBG_MODEM 0x00004000
-#define DBG_LIST 0x00008000
-
-#define DBG_ROUTE 0x00010000
-#define DBG_UTIL 0x00020000
-#define DBG_BOOT 0x00040000
-#define DBG_BUFFER 0x00080000
-
-#define DBG_MON 0x00100000
-#define DBG_SPECIAL 0x00200000
-#define DBG_VPIX 0x00400000
-#define DBG_FLUSH 0x00800000
-
-#define DBG_QENABLE 0x01000000
-
-#define DBG_ALWAYS 0x80000000
-
-#endif /* __rio_riospace_h__ */
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : riotable.c
-** SID : 1.2
-** Last Modified : 11/6/98 10:33:47
-** Retrieved : 11/6/98 10:33:50
-**
-** ident @(#)riotable.c 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-
-#include <linux/termios.h>
-#include <linux/serial.h>
-
-#include <linux/generic_serial.h>
-
-
-#include "linux_compat.h"
-#include "rio_linux.h"
-#include "pkt.h"
-#include "daemon.h"
-#include "rio.h"
-#include "riospace.h"
-#include "cmdpkt.h"
-#include "map.h"
-#include "rup.h"
-#include "port.h"
-#include "riodrvr.h"
-#include "rioinfo.h"
-#include "func.h"
-#include "errors.h"
-#include "pci.h"
-
-#include "parmmap.h"
-#include "unixrup.h"
-#include "board.h"
-#include "host.h"
-#include "phb.h"
-#include "link.h"
-#include "cmdblk.h"
-#include "route.h"
-#include "cirrus.h"
-#include "rioioctl.h"
-#include "param.h"
-#include "protsts.h"
-
-/*
-** A configuration table has been loaded. It is now up to us
-** to sort it out and use the information contained therein.
-*/
-int RIONewTable(struct rio_info *p)
-{
- int Host, Host1, Host2, NameIsUnique, Entry, SubEnt;
- struct Map *MapP;
- struct Map *HostMapP;
- struct Host *HostP;
-
- char *cptr;
-
- /*
- ** We have been sent a new table to install. We need to break
- ** it down into little bits and spread it around a bit to see
- ** what we have got.
- */
- /*
- ** Things to check:
- ** (things marked 'xx' aren't checked any more!)
- ** (1) That there are no booted Hosts/RTAs out there.
- ** (2) That the names are properly formed
- ** (3) That blank entries really are.
- ** xx (4) That hosts mentioned in the table actually exist. xx
- ** (5) That the IDs are unique (per host).
- ** (6) That host IDs are zero
- ** (7) That port numbers are valid
- ** (8) That port numbers aren't duplicated
- ** (9) That names aren't duplicated
- ** xx (10) That hosts that actually exist are mentioned in the table. xx
- */
- rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(1)\n");
- if (p->RIOSystemUp) { /* (1) */
- p->RIOError.Error = HOST_HAS_ALREADY_BEEN_BOOTED;
- return -EBUSY;
- }
-
- p->RIOError.Error = NOTHING_WRONG_AT_ALL;
- p->RIOError.Entry = -1;
- p->RIOError.Other = -1;
-
- for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) {
- MapP = &p->RIOConnectTable[Entry];
- if ((MapP->Flags & RTA16_SECOND_SLOT) == 0) {
- rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(2)\n");
- cptr = MapP->Name; /* (2) */
- cptr[MAX_NAME_LEN - 1] = '\0';
- if (cptr[0] == '\0') {
- memcpy(MapP->Name, MapP->RtaUniqueNum ? "RTA NN" : "HOST NN", 8);
- MapP->Name[5] = '0' + Entry / 10;
- MapP->Name[6] = '0' + Entry % 10;
- }
- while (*cptr) {
- if (*cptr < ' ' || *cptr > '~') {
- p->RIOError.Error = BAD_CHARACTER_IN_NAME;
- p->RIOError.Entry = Entry;
- return -ENXIO;
- }
- cptr++;
- }
- }
-
- /*
- ** If the entry saved was a tentative entry then just forget
- ** about it.
- */
- if (MapP->Flags & SLOT_TENTATIVE) {
- MapP->HostUniqueNum = 0;
- MapP->RtaUniqueNum = 0;
- continue;
- }
-
- rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(3)\n");
- if (!MapP->RtaUniqueNum && !MapP->HostUniqueNum) { /* (3) */
- if (MapP->ID || MapP->SysPort || MapP->Flags) {
- rio_dprintk(RIO_DEBUG_TABLE, "%s pretending to be empty but isn't\n", MapP->Name);
- p->RIOError.Error = TABLE_ENTRY_ISNT_PROPERLY_NULL;
- p->RIOError.Entry = Entry;
- return -ENXIO;
- }
- rio_dprintk(RIO_DEBUG_TABLE, "!RIO: Daemon: test (3) passes\n");
- continue;
- }
-
- rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(4)\n");
- for (Host = 0; Host < p->RIONumHosts; Host++) { /* (4) */
- if (p->RIOHosts[Host].UniqueNum == MapP->HostUniqueNum) {
- HostP = &p->RIOHosts[Host];
- /*
- ** having done the lookup, we don't really want to do
- ** it again, so hang the host number in a safe place
- */
- MapP->Topology[0].Unit = Host;
- break;
- }
- }
-
- if (Host >= p->RIONumHosts) {
- rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has unknown host unique number 0x%x\n", MapP->Name, MapP->HostUniqueNum);
- MapP->HostUniqueNum = 0;
- /* MapP->RtaUniqueNum = 0; */
- /* MapP->ID = 0; */
- /* MapP->Flags = 0; */
- /* MapP->SysPort = 0; */
- /* MapP->Name[0] = 0; */
- continue;
- }
-
- rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(5)\n");
- if (MapP->RtaUniqueNum) { /* (5) */
- if (!MapP->ID) {
- rio_dprintk(RIO_DEBUG_TABLE, "RIO: RTA %s has been allocated an ID of zero!\n", MapP->Name);
- p->RIOError.Error = ZERO_RTA_ID;
- p->RIOError.Entry = Entry;
- return -ENXIO;
- }
- if (MapP->ID > MAX_RUP) {
- rio_dprintk(RIO_DEBUG_TABLE, "RIO: RTA %s has been allocated an invalid ID %d\n", MapP->Name, MapP->ID);
- p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE;
- p->RIOError.Entry = Entry;
- return -ENXIO;
- }
- for (SubEnt = 0; SubEnt < Entry; SubEnt++) {
- if (MapP->HostUniqueNum == p->RIOConnectTable[SubEnt].HostUniqueNum && MapP->ID == p->RIOConnectTable[SubEnt].ID) {
- rio_dprintk(RIO_DEBUG_TABLE, "Dupl. ID number allocated to RTA %s and RTA %s\n", MapP->Name, p->RIOConnectTable[SubEnt].Name);
- p->RIOError.Error = DUPLICATED_RTA_ID;
- p->RIOError.Entry = Entry;
- p->RIOError.Other = SubEnt;
- return -ENXIO;
- }
- /*
- ** If the RtaUniqueNum is the same, it may be looking at both
- ** entries for a 16 port RTA, so check the ids
- */
- if ((MapP->RtaUniqueNum == p->RIOConnectTable[SubEnt].RtaUniqueNum)
- && (MapP->ID2 != p->RIOConnectTable[SubEnt].ID)) {
- rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has duplicate unique number\n", MapP->Name);
- rio_dprintk(RIO_DEBUG_TABLE, "RTA %s has duplicate unique number\n", p->RIOConnectTable[SubEnt].Name);
- p->RIOError.Error = DUPLICATE_UNIQUE_NUMBER;
- p->RIOError.Entry = Entry;
- p->RIOError.Other = SubEnt;
- return -ENXIO;
- }
- }
- rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(7a)\n");
- /* (7a) */
- if ((MapP->SysPort != NO_PORT) && (MapP->SysPort % PORTS_PER_RTA)) {
- rio_dprintk(RIO_DEBUG_TABLE, "TTY Port number %d-RTA %s is not a multiple of %d!\n", (int) MapP->SysPort, MapP->Name, PORTS_PER_RTA);
- p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE;
- p->RIOError.Entry = Entry;
- return -ENXIO;
- }
- rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(7b)\n");
- /* (7b) */
- if ((MapP->SysPort != NO_PORT) && (MapP->SysPort >= RIO_PORTS)) {
- rio_dprintk(RIO_DEBUG_TABLE, "TTY Port number %d for RTA %s is too big\n", (int) MapP->SysPort, MapP->Name);
- p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE;
- p->RIOError.Entry = Entry;
- return -ENXIO;
- }
- for (SubEnt = 0; SubEnt < Entry; SubEnt++) {
- if (p->RIOConnectTable[SubEnt].Flags & RTA16_SECOND_SLOT)
- continue;
- if (p->RIOConnectTable[SubEnt].RtaUniqueNum) {
- rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(8)\n");
- /* (8) */
- if ((MapP->SysPort != NO_PORT) && (MapP->SysPort == p->RIOConnectTable[SubEnt].SysPort)) {
- rio_dprintk(RIO_DEBUG_TABLE, "RTA %s:same TTY port # as RTA %s (%d)\n", MapP->Name, p->RIOConnectTable[SubEnt].Name, (int) MapP->SysPort);
- p->RIOError.Error = TTY_NUMBER_IN_USE;
- p->RIOError.Entry = Entry;
- p->RIOError.Other = SubEnt;
- return -ENXIO;
- }
- rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(9)\n");
- if (strcmp(MapP->Name, p->RIOConnectTable[SubEnt].Name) == 0 && !(MapP->Flags & RTA16_SECOND_SLOT)) { /* (9) */
- rio_dprintk(RIO_DEBUG_TABLE, "RTA name %s used twice\n", MapP->Name);
- p->RIOError.Error = NAME_USED_TWICE;
- p->RIOError.Entry = Entry;
- p->RIOError.Other = SubEnt;
- return -ENXIO;
- }
- }
- }
- } else { /* (6) */
- rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: entering(6)\n");
- if (MapP->ID) {
- rio_dprintk(RIO_DEBUG_TABLE, "RIO:HOST %s has been allocated ID that isn't zero!\n", MapP->Name);
- p->RIOError.Error = HOST_ID_NOT_ZERO;
- p->RIOError.Entry = Entry;
- return -ENXIO;
- }
- if (MapP->SysPort != NO_PORT) {
- rio_dprintk(RIO_DEBUG_TABLE, "RIO: HOST %s has been allocated port numbers!\n", MapP->Name);
- p->RIOError.Error = HOST_SYSPORT_BAD;
- p->RIOError.Entry = Entry;
- return -ENXIO;
- }
- }
- }
-
- /*
- ** wow! if we get here then it's a goody!
- */
-
- /*
- ** Zero the (old) entries for each host...
- */
- for (Host = 0; Host < RIO_HOSTS; Host++) {
- for (Entry = 0; Entry < MAX_RUP; Entry++) {
- memset(&p->RIOHosts[Host].Mapping[Entry], 0, sizeof(struct Map));
- }
- memset(&p->RIOHosts[Host].Name[0], 0, sizeof(p->RIOHosts[Host].Name));
- }
-
- /*
- ** Copy in the new table entries
- */
- for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) {
- rio_dprintk(RIO_DEBUG_TABLE, "RIONewTable: Copy table for Host entry %d\n", Entry);
- MapP = &p->RIOConnectTable[Entry];
-
- /*
- ** Now, if it is an empty slot ignore it!
- */
- if (MapP->HostUniqueNum == 0)
- continue;
-
- /*
- ** we saved the host number earlier, so grab it back
- */
- HostP = &p->RIOHosts[MapP->Topology[0].Unit];
-
- /*
- ** If it is a host, then we only need to fill in the name field.
- */
- if (MapP->ID == 0) {
- rio_dprintk(RIO_DEBUG_TABLE, "Host entry found. Name %s\n", MapP->Name);
- memcpy(HostP->Name, MapP->Name, MAX_NAME_LEN);
- continue;
- }
-
- /*
- ** Its an RTA entry, so fill in the host mapping entries for it
- ** and the port mapping entries. Notice that entry zero is for
- ** ID one.
- */
- HostMapP = &HostP->Mapping[MapP->ID - 1];
-
- if (MapP->Flags & SLOT_IN_USE) {
- rio_dprintk(RIO_DEBUG_TABLE, "Rta entry found. Name %s\n", MapP->Name);
- /*
- ** structure assign, then sort out the bits we shouldn't have done
- */
- *HostMapP = *MapP;
-
- HostMapP->Flags = SLOT_IN_USE;
- if (MapP->Flags & RTA16_SECOND_SLOT)
- HostMapP->Flags |= RTA16_SECOND_SLOT;
-
- RIOReMapPorts(p, HostP, HostMapP);
- } else {
- rio_dprintk(RIO_DEBUG_TABLE, "TENTATIVE Rta entry found. Name %s\n", MapP->Name);
- }
- }
-
- for (Entry = 0; Entry < TOTAL_MAP_ENTRIES; Entry++) {
- p->RIOSavedTable[Entry] = p->RIOConnectTable[Entry];
- }
-
- for (Host = 0; Host < p->RIONumHosts; Host++) {
- for (SubEnt = 0; SubEnt < LINKS_PER_UNIT; SubEnt++) {
- p->RIOHosts[Host].Topology[SubEnt].Unit = ROUTE_DISCONNECT;
- p->RIOHosts[Host].Topology[SubEnt].Link = NO_LINK;
- }
- for (Entry = 0; Entry < MAX_RUP; Entry++) {
- for (SubEnt = 0; SubEnt < LINKS_PER_UNIT; SubEnt++) {
- p->RIOHosts[Host].Mapping[Entry].Topology[SubEnt].Unit = ROUTE_DISCONNECT;
- p->RIOHosts[Host].Mapping[Entry].Topology[SubEnt].Link = NO_LINK;
- }
- }
- if (!p->RIOHosts[Host].Name[0]) {
- memcpy(p->RIOHosts[Host].Name, "HOST 1", 7);
- p->RIOHosts[Host].Name[5] += Host;
- }
- /*
- ** Check that default name assigned is unique.
- */
- Host1 = Host;
- NameIsUnique = 0;
- while (!NameIsUnique) {
- NameIsUnique = 1;
- for (Host2 = 0; Host2 < p->RIONumHosts; Host2++) {
- if (Host2 == Host)
- continue;
- if (strcmp(p->RIOHosts[Host].Name, p->RIOHosts[Host2].Name)
- == 0) {
- NameIsUnique = 0;
- Host1++;
- if (Host1 >= p->RIONumHosts)
- Host1 = 0;
- p->RIOHosts[Host].Name[5] = '1' + Host1;
- }
- }
- }
- /*
- ** Rename host if name already used.
- */
- if (Host1 != Host) {
- rio_dprintk(RIO_DEBUG_TABLE, "Default name %s already used\n", p->RIOHosts[Host].Name);
- memcpy(p->RIOHosts[Host].Name, "HOST 1", 7);
- p->RIOHosts[Host].Name[5] += Host1;
- }
- rio_dprintk(RIO_DEBUG_TABLE, "Assigning default name %s\n", p->RIOHosts[Host].Name);
- }
- return 0;
-}
-
-/*
-** User process needs the config table - build it from first
-** principles.
-**
-* FIXME: SMP locking
-*/
-int RIOApel(struct rio_info *p)
-{
- int Host;
- int link;
- int Rup;
- int Next = 0;
- struct Map *MapP;
- struct Host *HostP;
- unsigned long flags;
-
- rio_dprintk(RIO_DEBUG_TABLE, "Generating a table to return to config.rio\n");
-
- memset(&p->RIOConnectTable[0], 0, sizeof(struct Map) * TOTAL_MAP_ENTRIES);
-
- for (Host = 0; Host < RIO_HOSTS; Host++) {
- rio_dprintk(RIO_DEBUG_TABLE, "Processing host %d\n", Host);
- HostP = &p->RIOHosts[Host];
- rio_spin_lock_irqsave(&HostP->HostLock, flags);
-
- MapP = &p->RIOConnectTable[Next++];
- MapP->HostUniqueNum = HostP->UniqueNum;
- if ((HostP->Flags & RUN_STATE) != RC_RUNNING) {
- rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
- continue;
- }
- MapP->RtaUniqueNum = 0;
- MapP->ID = 0;
- MapP->Flags = SLOT_IN_USE;
- MapP->SysPort = NO_PORT;
- for (link = 0; link < LINKS_PER_UNIT; link++)
- MapP->Topology[link] = HostP->Topology[link];
- memcpy(MapP->Name, HostP->Name, MAX_NAME_LEN);
- for (Rup = 0; Rup < MAX_RUP; Rup++) {
- if (HostP->Mapping[Rup].Flags & (SLOT_IN_USE | SLOT_TENTATIVE)) {
- p->RIOConnectTable[Next] = HostP->Mapping[Rup];
- if (HostP->Mapping[Rup].Flags & SLOT_IN_USE)
- p->RIOConnectTable[Next].Flags |= SLOT_IN_USE;
- if (HostP->Mapping[Rup].Flags & SLOT_TENTATIVE)
- p->RIOConnectTable[Next].Flags |= SLOT_TENTATIVE;
- if (HostP->Mapping[Rup].Flags & RTA16_SECOND_SLOT)
- p->RIOConnectTable[Next].Flags |= RTA16_SECOND_SLOT;
- Next++;
- }
- }
- rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
- }
- return 0;
-}
-
-/*
-** config.rio has taken a dislike to one of the gross maps entries.
-** if the entry is suitably inactive, then we can gob on it and remove
-** it from the table.
-*/
-int RIODeleteRta(struct rio_info *p, struct Map *MapP)
-{
- int host, entry, port, link;
- int SysPort;
- struct Host *HostP;
- struct Map *HostMapP;
- struct Port *PortP;
- int work_done = 0;
- unsigned long lock_flags, sem_flags;
-
- rio_dprintk(RIO_DEBUG_TABLE, "Delete entry on host %x, rta %x\n", MapP->HostUniqueNum, MapP->RtaUniqueNum);
-
- for (host = 0; host < p->RIONumHosts; host++) {
- HostP = &p->RIOHosts[host];
-
- rio_spin_lock_irqsave(&HostP->HostLock, lock_flags);
-
- if ((HostP->Flags & RUN_STATE) != RC_RUNNING) {
- rio_spin_unlock_irqrestore(&HostP->HostLock, lock_flags);
- continue;
- }
-
- for (entry = 0; entry < MAX_RUP; entry++) {
- if (MapP->RtaUniqueNum == HostP->Mapping[entry].RtaUniqueNum) {
- HostMapP = &HostP->Mapping[entry];
- rio_dprintk(RIO_DEBUG_TABLE, "Found entry offset %d on host %s\n", entry, HostP->Name);
-
- /*
- ** Check all four links of the unit are disconnected
- */
- for (link = 0; link < LINKS_PER_UNIT; link++) {
- if (HostMapP->Topology[link].Unit != ROUTE_DISCONNECT) {
- rio_dprintk(RIO_DEBUG_TABLE, "Entry is in use and cannot be deleted!\n");
- p->RIOError.Error = UNIT_IS_IN_USE;
- rio_spin_unlock_irqrestore(&HostP->HostLock, lock_flags);
- return -EBUSY;
- }
- }
- /*
- ** Slot has been allocated, BUT not booted/routed/
- ** connected/selected or anything else-ed
- */
- SysPort = HostMapP->SysPort;
-
- if (SysPort != NO_PORT) {
- for (port = SysPort; port < SysPort + PORTS_PER_RTA; port++) {
- PortP = p->RIOPortp[port];
- rio_dprintk(RIO_DEBUG_TABLE, "Unmap port\n");
-
- rio_spin_lock_irqsave(&PortP->portSem, sem_flags);
-
- PortP->Mapped = 0;
-
- if (PortP->State & (RIO_MOPEN | RIO_LOPEN)) {
-
- rio_dprintk(RIO_DEBUG_TABLE, "Gob on port\n");
- PortP->TxBufferIn = PortP->TxBufferOut = 0;
- /* What should I do
- wakeup( &PortP->TxBufferIn );
- wakeup( &PortP->TxBufferOut);
- */
- PortP->InUse = NOT_INUSE;
- /* What should I do
- wakeup( &PortP->InUse );
- signal(PortP->TtyP->t_pgrp,SIGKILL);
- ttyflush(PortP->TtyP,(FREAD|FWRITE));
- */
- PortP->State |= RIO_CLOSING | RIO_DELETED;
- }
-
- /*
- ** For the second slot of a 16 port RTA, the
- ** driver needs to reset the changes made to
- ** the phb to port mappings in RIORouteRup.
- */
- if (PortP->SecondBlock) {
- u16 dest_unit = HostMapP->ID;
- u16 dest_port = port - SysPort;
- u16 __iomem *TxPktP;
- struct PKT __iomem *Pkt;
-
- for (TxPktP = PortP->TxStart; TxPktP <= PortP->TxEnd; TxPktP++) {
- /*
- ** *TxPktP is the pointer to the
- ** transmit packet on the host card.
- ** This needs to be translated into
- ** a 32 bit pointer so it can be
- ** accessed from the driver.
- */
- Pkt = (struct PKT __iomem *) RIO_PTR(HostP->Caddr, readw(&*TxPktP));
- rio_dprintk(RIO_DEBUG_TABLE, "Tx packet (%x) destination: Old %x:%x New %x:%x\n", readw(TxPktP), readb(&Pkt->dest_unit), readb(&Pkt->dest_port), dest_unit, dest_port);
- writew(dest_unit, &Pkt->dest_unit);
- writew(dest_port, &Pkt->dest_port);
- }
- rio_dprintk(RIO_DEBUG_TABLE, "Port %d phb destination: Old %x:%x New %x:%x\n", port, readb(&PortP->PhbP->destination) & 0xff, (readb(&PortP->PhbP->destination) >> 8) & 0xff, dest_unit, dest_port);
- writew(dest_unit + (dest_port << 8), &PortP->PhbP->destination);
- }
- rio_spin_unlock_irqrestore(&PortP->portSem, sem_flags);
- }
- }
- rio_dprintk(RIO_DEBUG_TABLE, "Entry nulled.\n");
- memset(HostMapP, 0, sizeof(struct Map));
- work_done++;
- }
- }
- rio_spin_unlock_irqrestore(&HostP->HostLock, lock_flags);
- }
-
- /* XXXXX lock me up */
- for (entry = 0; entry < TOTAL_MAP_ENTRIES; entry++) {
- if (p->RIOSavedTable[entry].RtaUniqueNum == MapP->RtaUniqueNum) {
- memset(&p->RIOSavedTable[entry], 0, sizeof(struct Map));
- work_done++;
- }
- if (p->RIOConnectTable[entry].RtaUniqueNum == MapP->RtaUniqueNum) {
- memset(&p->RIOConnectTable[entry], 0, sizeof(struct Map));
- work_done++;
- }
- }
- if (work_done)
- return 0;
-
- rio_dprintk(RIO_DEBUG_TABLE, "Couldn't find entry to be deleted\n");
- p->RIOError.Error = COULDNT_FIND_ENTRY;
- return -ENXIO;
-}
-
-int RIOAssignRta(struct rio_info *p, struct Map *MapP)
-{
- int host;
- struct Map *HostMapP;
- char *sptr;
- int link;
-
-
- rio_dprintk(RIO_DEBUG_TABLE, "Assign entry on host %x, rta %x, ID %d, Sysport %d\n", MapP->HostUniqueNum, MapP->RtaUniqueNum, MapP->ID, (int) MapP->SysPort);
-
- if ((MapP->ID != (u16) - 1) && ((int) MapP->ID < (int) 1 || (int) MapP->ID > MAX_RUP)) {
- rio_dprintk(RIO_DEBUG_TABLE, "Bad ID in map entry!\n");
- p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
- if (MapP->RtaUniqueNum == 0) {
- rio_dprintk(RIO_DEBUG_TABLE, "Rta Unique number zero!\n");
- p->RIOError.Error = RTA_UNIQUE_NUMBER_ZERO;
- return -EINVAL;
- }
- if ((MapP->SysPort != NO_PORT) && (MapP->SysPort % PORTS_PER_RTA)) {
- rio_dprintk(RIO_DEBUG_TABLE, "Port %d not multiple of %d!\n", (int) MapP->SysPort, PORTS_PER_RTA);
- p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
- if ((MapP->SysPort != NO_PORT) && (MapP->SysPort >= RIO_PORTS)) {
- rio_dprintk(RIO_DEBUG_TABLE, "Port %d not valid!\n", (int) MapP->SysPort);
- p->RIOError.Error = TTY_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
-
- /*
- ** Copy the name across to the map entry.
- */
- MapP->Name[MAX_NAME_LEN - 1] = '\0';
- sptr = MapP->Name;
- while (*sptr) {
- if (*sptr < ' ' || *sptr > '~') {
- rio_dprintk(RIO_DEBUG_TABLE, "Name entry contains non-printing characters!\n");
- p->RIOError.Error = BAD_CHARACTER_IN_NAME;
- return -EINVAL;
- }
- sptr++;
- }
-
- for (host = 0; host < p->RIONumHosts; host++) {
- if (MapP->HostUniqueNum == p->RIOHosts[host].UniqueNum) {
- if ((p->RIOHosts[host].Flags & RUN_STATE) != RC_RUNNING) {
- p->RIOError.Error = HOST_NOT_RUNNING;
- return -ENXIO;
- }
-
- /*
- ** Now we have a host we need to allocate an ID
- ** if the entry does not already have one.
- */
- if (MapP->ID == (u16) - 1) {
- int nNewID;
-
- rio_dprintk(RIO_DEBUG_TABLE, "Attempting to get a new ID for rta \"%s\"\n", MapP->Name);
- /*
- ** The idea here is to allow RTA's to be assigned
- ** before they actually appear on the network.
- ** This allows the addition of RTA's without having
- ** to plug them in.
- ** What we do is:
- ** - Find a free ID and allocate it to the RTA.
- ** - If this map entry is the second half of a
- ** 16 port entry then find the other half and
- ** make sure the 2 cross reference each other.
- */
- if (RIOFindFreeID(p, &p->RIOHosts[host], &nNewID, NULL) != 0) {
- p->RIOError.Error = COULDNT_FIND_ENTRY;
- return -EBUSY;
- }
- MapP->ID = (u16) nNewID + 1;
- rio_dprintk(RIO_DEBUG_TABLE, "Allocated ID %d for this new RTA.\n", MapP->ID);
- HostMapP = &p->RIOHosts[host].Mapping[nNewID];
- HostMapP->RtaUniqueNum = MapP->RtaUniqueNum;
- HostMapP->HostUniqueNum = MapP->HostUniqueNum;
- HostMapP->ID = MapP->ID;
- for (link = 0; link < LINKS_PER_UNIT; link++) {
- HostMapP->Topology[link].Unit = ROUTE_DISCONNECT;
- HostMapP->Topology[link].Link = NO_LINK;
- }
- if (MapP->Flags & RTA16_SECOND_SLOT) {
- int unit;
-
- for (unit = 0; unit < MAX_RUP; unit++)
- if (p->RIOHosts[host].Mapping[unit].RtaUniqueNum == MapP->RtaUniqueNum)
- break;
- if (unit == MAX_RUP) {
- p->RIOError.Error = COULDNT_FIND_ENTRY;
- return -EBUSY;
- }
- HostMapP->Flags |= RTA16_SECOND_SLOT;
- HostMapP->ID2 = MapP->ID2 = p->RIOHosts[host].Mapping[unit].ID;
- p->RIOHosts[host].Mapping[unit].ID2 = MapP->ID;
- rio_dprintk(RIO_DEBUG_TABLE, "Cross referenced id %d to ID %d.\n", MapP->ID, p->RIOHosts[host].Mapping[unit].ID);
- }
- }
-
- HostMapP = &p->RIOHosts[host].Mapping[MapP->ID - 1];
-
- if (HostMapP->Flags & SLOT_IN_USE) {
- rio_dprintk(RIO_DEBUG_TABLE, "Map table slot for ID %d is already in use.\n", MapP->ID);
- p->RIOError.Error = ID_ALREADY_IN_USE;
- return -EBUSY;
- }
-
- /*
- ** Assign the sys ports and the name, and mark the slot as
- ** being in use.
- */
- HostMapP->SysPort = MapP->SysPort;
- if ((MapP->Flags & RTA16_SECOND_SLOT) == 0)
- memcpy(HostMapP->Name, MapP->Name, MAX_NAME_LEN);
- HostMapP->Flags = SLOT_IN_USE | RTA_BOOTED;
-#ifdef NEED_TO_FIX
- RIO_SV_BROADCAST(p->RIOHosts[host].svFlags[MapP->ID - 1]);
-#endif
- if (MapP->Flags & RTA16_SECOND_SLOT)
- HostMapP->Flags |= RTA16_SECOND_SLOT;
-
- RIOReMapPorts(p, &p->RIOHosts[host], HostMapP);
- /*
- ** Adjust 2nd block of 8 phbs
- */
- if (MapP->Flags & RTA16_SECOND_SLOT)
- RIOFixPhbs(p, &p->RIOHosts[host], HostMapP->ID - 1);
-
- if (HostMapP->SysPort != NO_PORT) {
- if (HostMapP->SysPort < p->RIOFirstPortsBooted)
- p->RIOFirstPortsBooted = HostMapP->SysPort;
- if (HostMapP->SysPort > p->RIOLastPortsBooted)
- p->RIOLastPortsBooted = HostMapP->SysPort;
- }
- if (MapP->Flags & RTA16_SECOND_SLOT)
- rio_dprintk(RIO_DEBUG_TABLE, "Second map of RTA %s added to configuration\n", p->RIOHosts[host].Mapping[MapP->ID2 - 1].Name);
- else
- rio_dprintk(RIO_DEBUG_TABLE, "RTA %s added to configuration\n", MapP->Name);
- return 0;
- }
- }
- p->RIOError.Error = UNKNOWN_HOST_NUMBER;
- rio_dprintk(RIO_DEBUG_TABLE, "Unknown host %x\n", MapP->HostUniqueNum);
- return -ENXIO;
-}
-
-
-int RIOReMapPorts(struct rio_info *p, struct Host *HostP, struct Map *HostMapP)
-{
- struct Port *PortP;
- unsigned int SubEnt;
- unsigned int HostPort;
- unsigned int SysPort;
- u16 RtaType;
- unsigned long flags;
-
- rio_dprintk(RIO_DEBUG_TABLE, "Mapping sysport %d to id %d\n", (int) HostMapP->SysPort, HostMapP->ID);
-
- /*
- ** We need to tell the UnixRups which sysport the rup corresponds to
- */
- HostP->UnixRups[HostMapP->ID - 1].BaseSysPort = HostMapP->SysPort;
-
- if (HostMapP->SysPort == NO_PORT)
- return (0);
-
- RtaType = GetUnitType(HostMapP->RtaUniqueNum);
- rio_dprintk(RIO_DEBUG_TABLE, "Mapping sysport %d-%d\n", (int) HostMapP->SysPort, (int) HostMapP->SysPort + PORTS_PER_RTA - 1);
-
- /*
- ** now map each of its eight ports
- */
- for (SubEnt = 0; SubEnt < PORTS_PER_RTA; SubEnt++) {
- rio_dprintk(RIO_DEBUG_TABLE, "subent = %d, HostMapP->SysPort = %d\n", SubEnt, (int) HostMapP->SysPort);
- SysPort = HostMapP->SysPort + SubEnt; /* portnumber within system */
- /* portnumber on host */
-
- HostPort = (HostMapP->ID - 1) * PORTS_PER_RTA + SubEnt;
-
- rio_dprintk(RIO_DEBUG_TABLE, "c1 p = %p, p->rioPortp = %p\n", p, p->RIOPortp);
- PortP = p->RIOPortp[SysPort];
- rio_dprintk(RIO_DEBUG_TABLE, "Map port\n");
-
- /*
- ** Point at all the real neat data structures
- */
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- PortP->HostP = HostP;
- PortP->Caddr = HostP->Caddr;
-
- /*
- ** The PhbP cannot be filled in yet
- ** unless the host has been booted
- */
- if ((HostP->Flags & RUN_STATE) == RC_RUNNING) {
- struct PHB __iomem *PhbP = PortP->PhbP = &HostP->PhbP[HostPort];
- PortP->TxAdd = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->tx_add));
- PortP->TxStart = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->tx_start));
- PortP->TxEnd = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->tx_end));
- PortP->RxRemove = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->rx_remove));
- PortP->RxStart = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->rx_start));
- PortP->RxEnd = (u16 __iomem *) RIO_PTR(HostP->Caddr, readw(&PhbP->rx_end));
- } else
- PortP->PhbP = NULL;
-
- /*
- ** port related flags
- */
- PortP->HostPort = HostPort;
- /*
- ** For each part of a 16 port RTA, RupNum is ID - 1.
- */
- PortP->RupNum = HostMapP->ID - 1;
- if (HostMapP->Flags & RTA16_SECOND_SLOT) {
- PortP->ID2 = HostMapP->ID2 - 1;
- PortP->SecondBlock = 1;
- } else {
- PortP->ID2 = 0;
- PortP->SecondBlock = 0;
- }
- PortP->RtaUniqueNum = HostMapP->RtaUniqueNum;
-
- /*
- ** If the port was already mapped then thats all we need to do.
- */
- if (PortP->Mapped) {
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- continue;
- } else
- HostMapP->Flags &= ~RTA_NEWBOOT;
-
- PortP->State = 0;
- PortP->Config = 0;
- /*
- ** Check out the module type - if it is special (read only etc.)
- ** then we need to set flags in the PortP->Config.
- ** Note: For 16 port RTA, all ports are of the same type.
- */
- if (RtaType == TYPE_RTA16) {
- PortP->Config |= p->RIOModuleTypes[HostP->UnixRups[HostMapP->ID - 1].ModTypes].Flags[SubEnt % PORTS_PER_MODULE];
- } else {
- if (SubEnt < PORTS_PER_MODULE)
- PortP->Config |= p->RIOModuleTypes[LONYBLE(HostP->UnixRups[HostMapP->ID - 1].ModTypes)].Flags[SubEnt % PORTS_PER_MODULE];
- else
- PortP->Config |= p->RIOModuleTypes[HINYBLE(HostP->UnixRups[HostMapP->ID - 1].ModTypes)].Flags[SubEnt % PORTS_PER_MODULE];
- }
-
- /*
- ** more port related flags
- */
- PortP->PortState = 0;
- PortP->ModemLines = 0;
- PortP->ModemState = 0;
- PortP->CookMode = COOK_WELL;
- PortP->ParamSem = 0;
- PortP->FlushCmdBodge = 0;
- PortP->WflushFlag = 0;
- PortP->MagicFlags = 0;
- PortP->Lock = 0;
- PortP->Store = 0;
- PortP->FirstOpen = 1;
-
- /*
- ** Buffers 'n things
- */
- PortP->RxDataStart = 0;
- PortP->Cor2Copy = 0;
- PortP->Name = &HostMapP->Name[0];
- PortP->statsGather = 0;
- PortP->txchars = 0;
- PortP->rxchars = 0;
- PortP->opens = 0;
- PortP->closes = 0;
- PortP->ioctls = 0;
- if (PortP->TxRingBuffer)
- memset(PortP->TxRingBuffer, 0, p->RIOBufferSize);
- else if (p->RIOBufferSize) {
- PortP->TxRingBuffer = kzalloc(p->RIOBufferSize, GFP_KERNEL);
- }
- PortP->TxBufferOut = 0;
- PortP->TxBufferIn = 0;
- PortP->Debug = 0;
- /*
- ** LastRxTgl stores the state of the rx toggle bit for this
- ** port, to be compared with the state of the next pkt received.
- ** If the same, we have received the same rx pkt from the RTA
- ** twice. Initialise to a value not equal to PHB_RX_TGL or 0.
- */
- PortP->LastRxTgl = ~(u8) PHB_RX_TGL;
-
- /*
- ** and mark the port as usable
- */
- PortP->Mapped = 1;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- }
- if (HostMapP->SysPort < p->RIOFirstPortsMapped)
- p->RIOFirstPortsMapped = HostMapP->SysPort;
- if (HostMapP->SysPort > p->RIOLastPortsMapped)
- p->RIOLastPortsMapped = HostMapP->SysPort;
-
- return 0;
-}
-
-int RIOChangeName(struct rio_info *p, struct Map *MapP)
-{
- int host;
- struct Map *HostMapP;
- char *sptr;
-
- rio_dprintk(RIO_DEBUG_TABLE, "Change name entry on host %x, rta %x, ID %d, Sysport %d\n", MapP->HostUniqueNum, MapP->RtaUniqueNum, MapP->ID, (int) MapP->SysPort);
-
- if (MapP->ID > MAX_RUP) {
- rio_dprintk(RIO_DEBUG_TABLE, "Bad ID in map entry!\n");
- p->RIOError.Error = ID_NUMBER_OUT_OF_RANGE;
- return -EINVAL;
- }
-
- MapP->Name[MAX_NAME_LEN - 1] = '\0';
- sptr = MapP->Name;
-
- while (*sptr) {
- if (*sptr < ' ' || *sptr > '~') {
- rio_dprintk(RIO_DEBUG_TABLE, "Name entry contains non-printing characters!\n");
- p->RIOError.Error = BAD_CHARACTER_IN_NAME;
- return -EINVAL;
- }
- sptr++;
- }
-
- for (host = 0; host < p->RIONumHosts; host++) {
- if (MapP->HostUniqueNum == p->RIOHosts[host].UniqueNum) {
- if ((p->RIOHosts[host].Flags & RUN_STATE) != RC_RUNNING) {
- p->RIOError.Error = HOST_NOT_RUNNING;
- return -ENXIO;
- }
- if (MapP->ID == 0) {
- memcpy(p->RIOHosts[host].Name, MapP->Name, MAX_NAME_LEN);
- return 0;
- }
-
- HostMapP = &p->RIOHosts[host].Mapping[MapP->ID - 1];
-
- if (HostMapP->RtaUniqueNum != MapP->RtaUniqueNum) {
- p->RIOError.Error = RTA_NUMBER_WRONG;
- return -ENXIO;
- }
- memcpy(HostMapP->Name, MapP->Name, MAX_NAME_LEN);
- return 0;
- }
- }
- p->RIOError.Error = UNKNOWN_HOST_NUMBER;
- rio_dprintk(RIO_DEBUG_TABLE, "Unknown host %x\n", MapP->HostUniqueNum);
- return -ENXIO;
-}
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : riotty.c
-** SID : 1.3
-** Last Modified : 11/6/98 10:33:47
-** Retrieved : 11/6/98 10:33:50
-**
-** ident @(#)riotty.c 1.3
-**
-** -----------------------------------------------------------------------------
-*/
-
-#define __EXPLICIT_DEF_H__
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/string.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-
-#include <linux/termios.h>
-
-#include <linux/serial.h>
-
-#include <linux/generic_serial.h>
-
-
-#include "linux_compat.h"
-#include "rio_linux.h"
-#include "pkt.h"
-#include "daemon.h"
-#include "rio.h"
-#include "riospace.h"
-#include "cmdpkt.h"
-#include "map.h"
-#include "rup.h"
-#include "port.h"
-#include "riodrvr.h"
-#include "rioinfo.h"
-#include "func.h"
-#include "errors.h"
-#include "pci.h"
-
-#include "parmmap.h"
-#include "unixrup.h"
-#include "board.h"
-#include "host.h"
-#include "phb.h"
-#include "link.h"
-#include "cmdblk.h"
-#include "route.h"
-#include "cirrus.h"
-#include "rioioctl.h"
-#include "param.h"
-
-static void RIOClearUp(struct Port *PortP);
-
-/* Below belongs in func.h */
-int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len, int arg);
-
-
-extern struct rio_info *p;
-
-
-int riotopen(struct tty_struct *tty, struct file *filp)
-{
- unsigned int SysPort;
- int repeat_this = 250;
- struct Port *PortP; /* pointer to the port structure */
- unsigned long flags;
- int retval = 0;
-
- func_enter();
-
- /* Make sure driver_data is NULL in case the rio isn't booted jet. Else gs_close
- is going to oops.
- */
- tty->driver_data = NULL;
-
- SysPort = rio_minor(tty);
-
- if (p->RIOFailed) {
- rio_dprintk(RIO_DEBUG_TTY, "System initialisation failed\n");
- func_exit();
- return -ENXIO;
- }
-
- rio_dprintk(RIO_DEBUG_TTY, "port open SysPort %d (mapped:%d)\n", SysPort, p->RIOPortp[SysPort]->Mapped);
-
- /*
- ** Validate that we have received a legitimate request.
- ** Currently, just check that we are opening a port on
- ** a host card that actually exists, and that the port
- ** has been mapped onto a host.
- */
- if (SysPort >= RIO_PORTS) { /* out of range ? */
- rio_dprintk(RIO_DEBUG_TTY, "Illegal port number %d\n", SysPort);
- func_exit();
- return -ENXIO;
- }
-
- /*
- ** Grab pointer to the port structure
- */
- PortP = p->RIOPortp[SysPort]; /* Get control struc */
- rio_dprintk(RIO_DEBUG_TTY, "PortP: %p\n", PortP);
- if (!PortP->Mapped) { /* we aren't mapped yet! */
- /*
- ** The system doesn't know which RTA this port
- ** corresponds to.
- */
- rio_dprintk(RIO_DEBUG_TTY, "port not mapped into system\n");
- func_exit();
- return -ENXIO;
- }
-
- tty->driver_data = PortP;
-
- PortP->gs.port.tty = tty;
- PortP->gs.port.count++;
-
- rio_dprintk(RIO_DEBUG_TTY, "%d bytes in tx buffer\n", PortP->gs.xmit_cnt);
-
- retval = gs_init_port(&PortP->gs);
- if (retval) {
- PortP->gs.port.count--;
- return -ENXIO;
- }
- /*
- ** If the host hasn't been booted yet, then
- ** fail
- */
- if ((PortP->HostP->Flags & RUN_STATE) != RC_RUNNING) {
- rio_dprintk(RIO_DEBUG_TTY, "Host not running\n");
- func_exit();
- return -ENXIO;
- }
-
- /*
- ** If the RTA has not booted yet and the user has chosen to block
- ** until the RTA is present then we must spin here waiting for
- ** the RTA to boot.
- */
- /* I find the above code a bit hairy. I find the below code
- easier to read and shorter. Now, if it works too that would
- be great... -- REW
- */
- rio_dprintk(RIO_DEBUG_TTY, "Checking if RTA has booted... \n");
- while (!(PortP->HostP->Mapping[PortP->RupNum].Flags & RTA_BOOTED)) {
- if (!PortP->WaitUntilBooted) {
- rio_dprintk(RIO_DEBUG_TTY, "RTA never booted\n");
- func_exit();
- return -ENXIO;
- }
-
- /* Under Linux you'd normally use a wait instead of this
- busy-waiting. I'll stick with the old implementation for
- now. --REW
- */
- if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_TTY, "RTA_wait_for_boot: EINTR in delay \n");
- func_exit();
- return -EINTR;
- }
- if (repeat_this-- <= 0) {
- rio_dprintk(RIO_DEBUG_TTY, "Waiting for RTA to boot timeout\n");
- func_exit();
- return -EIO;
- }
- }
- rio_dprintk(RIO_DEBUG_TTY, "RTA has been booted\n");
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- if (p->RIOHalted) {
- goto bombout;
- }
-
- /*
- ** If the port is in the final throws of being closed,
- ** we should wait here (politely), waiting
- ** for it to finish, so that it doesn't close us!
- */
- while ((PortP->State & RIO_CLOSING) && !p->RIOHalted) {
- rio_dprintk(RIO_DEBUG_TTY, "Waiting for RIO_CLOSING to go away\n");
- if (repeat_this-- <= 0) {
- rio_dprintk(RIO_DEBUG_TTY, "Waiting for not idle closed broken by signal\n");
- RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE);
- retval = -EINTR;
- goto bombout;
- }
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- retval = -EINTR;
- goto bombout;
- }
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- }
-
- if (!PortP->Mapped) {
- rio_dprintk(RIO_DEBUG_TTY, "Port unmapped while closing!\n");
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- retval = -ENXIO;
- func_exit();
- return retval;
- }
-
- if (p->RIOHalted) {
- goto bombout;
- }
-
-/*
-** 15.10.1998 ARG - ESIL 0761 part fix
-** RIO has it's own CTSFLOW and RTSFLOW flags in 'Config' in the port structure,
-** we need to make sure that the flags are clear when the port is opened.
-*/
- /* Uh? Suppose I turn these on and then another process opens
- the port again? The flags get cleared! Not good. -- REW */
- if (!(PortP->State & (RIO_LOPEN | RIO_MOPEN))) {
- PortP->Config &= ~(RIO_CTSFLOW | RIO_RTSFLOW);
- }
-
- if (!(PortP->firstOpen)) { /* First time ? */
- rio_dprintk(RIO_DEBUG_TTY, "First open for this port\n");
-
-
- PortP->firstOpen++;
- PortP->CookMode = 0; /* XXX RIOCookMode(tp); */
- PortP->InUse = NOT_INUSE;
-
- /* Tentative fix for bug PR27. Didn't work. */
- /* PortP->gs.xmit_cnt = 0; */
-
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
-
- /* Someone explain to me why this delay/config is
- here. If I read the docs correctly the "open"
- command piggybacks the parameters immediately.
- -- REW */
- RIOParam(PortP, RIOC_OPEN, 1, OK_TO_SLEEP); /* Open the port */
- rio_spin_lock_irqsave(&PortP->portSem, flags);
-
- /*
- ** wait for the port to be not closed.
- */
- while (!(PortP->PortState & PORT_ISOPEN) && !p->RIOHalted) {
- rio_dprintk(RIO_DEBUG_TTY, "Waiting for PORT_ISOPEN-currently %x\n", PortP->PortState);
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_TTY, "Waiting for open to finish broken by signal\n");
- RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE);
- func_exit();
- return -EINTR;
- }
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- }
-
- if (p->RIOHalted) {
- retval = -EIO;
- bombout:
- /* RIOClearUp( PortP ); */
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return retval;
- }
- rio_dprintk(RIO_DEBUG_TTY, "PORT_ISOPEN found\n");
- }
- rio_dprintk(RIO_DEBUG_TTY, "Modem - test for carrier\n");
- /*
- ** ACTION
- ** insert test for carrier here. -- ???
- ** I already see that test here. What's the deal? -- REW
- */
- if ((PortP->gs.port.tty->termios->c_cflag & CLOCAL) ||
- (PortP->ModemState & RIOC_MSVR1_CD)) {
- rio_dprintk(RIO_DEBUG_TTY, "open(%d) Modem carr on\n", SysPort);
- /*
- tp->tm.c_state |= CARR_ON;
- wakeup((caddr_t) &tp->tm.c_canq);
- */
- PortP->State |= RIO_CARR_ON;
- wake_up_interruptible(&PortP->gs.port.open_wait);
- } else { /* no carrier - wait for DCD */
- /*
- while (!(PortP->gs.port.tty->termios->c_state & CARR_ON) &&
- !(filp->f_flags & O_NONBLOCK) && !p->RIOHalted )
- */
- while (!(PortP->State & RIO_CARR_ON) && !(filp->f_flags & O_NONBLOCK) && !p->RIOHalted) {
- rio_dprintk(RIO_DEBUG_TTY, "open(%d) sleeping for carr on\n", SysPort);
- /*
- PortP->gs.port.tty->termios->c_state |= WOPEN;
- */
- PortP->State |= RIO_WOPEN;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- /*
- ** ACTION: verify that this is a good thing
- ** to do here. -- ???
- ** I think it's OK. -- REW
- */
- rio_dprintk(RIO_DEBUG_TTY, "open(%d) sleeping for carr broken by signal\n", SysPort);
- RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE);
- /*
- tp->tm.c_state &= ~WOPEN;
- */
- PortP->State &= ~RIO_WOPEN;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- func_exit();
- return -EINTR;
- }
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- }
- PortP->State &= ~RIO_WOPEN;
- }
- if (p->RIOHalted)
- goto bombout;
- rio_dprintk(RIO_DEBUG_TTY, "Setting RIO_MOPEN\n");
- PortP->State |= RIO_MOPEN;
-
- if (p->RIOHalted)
- goto bombout;
-
- rio_dprintk(RIO_DEBUG_TTY, "high level open done\n");
-
- /*
- ** Count opens for port statistics reporting
- */
- if (PortP->statsGather)
- PortP->opens++;
-
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- rio_dprintk(RIO_DEBUG_TTY, "Returning from open\n");
- func_exit();
- return 0;
-}
-
-/*
-** RIOClose the port.
-** The operating system thinks that this is last close for the device.
-** As there are two interfaces to the port (Modem and tty), we need to
-** check that both are closed before we close the device.
-*/
-int riotclose(void *ptr)
-{
- struct Port *PortP = ptr; /* pointer to the port structure */
- int deleted = 0;
- int try = -1; /* Disable the timeouts by setting them to -1 */
- int repeat_this = -1; /* Congrats to those having 15 years of
- uptime! (You get to break the driver.) */
- unsigned long end_time;
- struct tty_struct *tty;
- unsigned long flags;
- int rv = 0;
-
- rio_dprintk(RIO_DEBUG_TTY, "port close SysPort %d\n", PortP->PortNum);
-
- /* PortP = p->RIOPortp[SysPort]; */
- rio_dprintk(RIO_DEBUG_TTY, "Port is at address %p\n", PortP);
- /* tp = PortP->TtyP; *//* Get tty */
- tty = PortP->gs.port.tty;
- rio_dprintk(RIO_DEBUG_TTY, "TTY is at address %p\n", tty);
-
- if (PortP->gs.closing_wait)
- end_time = jiffies + PortP->gs.closing_wait;
- else
- end_time = jiffies + MAX_SCHEDULE_TIMEOUT;
-
- rio_spin_lock_irqsave(&PortP->portSem, flags);
-
- /*
- ** Setting this flag will make any process trying to open
- ** this port block until we are complete closing it.
- */
- PortP->State |= RIO_CLOSING;
-
- if ((PortP->State & RIO_DELETED)) {
- rio_dprintk(RIO_DEBUG_TTY, "Close on deleted RTA\n");
- deleted = 1;
- }
-
- if (p->RIOHalted) {
- RIOClearUp(PortP);
- rv = -EIO;
- goto close_end;
- }
-
- rio_dprintk(RIO_DEBUG_TTY, "Clear bits\n");
- /*
- ** clear the open bits for this device
- */
- PortP->State &= ~RIO_MOPEN;
- PortP->State &= ~RIO_CARR_ON;
- PortP->ModemState &= ~RIOC_MSVR1_CD;
- /*
- ** If the device was open as both a Modem and a tty line
- ** then we need to wimp out here, as the port has not really
- ** been finally closed (gee, whizz!) The test here uses the
- ** bit for the OTHER mode of operation, to see if THAT is
- ** still active!
- */
- if ((PortP->State & (RIO_LOPEN | RIO_MOPEN))) {
- /*
- ** The port is still open for the other task -
- ** return, pretending that we are still active.
- */
- rio_dprintk(RIO_DEBUG_TTY, "Channel %d still open !\n", PortP->PortNum);
- PortP->State &= ~RIO_CLOSING;
- if (PortP->firstOpen)
- PortP->firstOpen--;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return -EIO;
- }
-
- rio_dprintk(RIO_DEBUG_TTY, "Closing down - everything must go!\n");
-
- PortP->State &= ~RIO_DYNOROD;
-
- /*
- ** This is where we wait for the port
- ** to drain down before closing. Bye-bye....
- ** (We never meant to do this)
- */
- rio_dprintk(RIO_DEBUG_TTY, "Timeout 1 starts\n");
-
- if (!deleted)
- while ((PortP->InUse != NOT_INUSE) && !p->RIOHalted && (PortP->TxBufferIn != PortP->TxBufferOut)) {
- if (repeat_this-- <= 0) {
- rv = -EINTR;
- rio_dprintk(RIO_DEBUG_TTY, "Waiting for not idle closed broken by signal\n");
- RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE);
- goto close_end;
- }
- rio_dprintk(RIO_DEBUG_TTY, "Calling timeout to flush in closing\n");
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- if (RIODelay_ni(PortP, HUNDRED_MS * 10) == RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_TTY, "RTA EINTR in delay \n");
- rv = -EINTR;
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- goto close_end;
- }
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- }
-
- PortP->TxBufferIn = PortP->TxBufferOut = 0;
- repeat_this = 0xff;
-
- PortP->InUse = 0;
- if ((PortP->State & (RIO_LOPEN | RIO_MOPEN))) {
- /*
- ** The port has been re-opened for the other task -
- ** return, pretending that we are still active.
- */
- rio_dprintk(RIO_DEBUG_TTY, "Channel %d re-open!\n", PortP->PortNum);
- PortP->State &= ~RIO_CLOSING;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- if (PortP->firstOpen)
- PortP->firstOpen--;
- return -EIO;
- }
-
- if (p->RIOHalted) {
- RIOClearUp(PortP);
- goto close_end;
- }
-
- /* Can't call RIOShortCommand with the port locked. */
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
-
- if (RIOShortCommand(p, PortP, RIOC_CLOSE, 1, 0) == RIO_FAIL) {
- RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE);
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- goto close_end;
- }
-
- if (!deleted)
- while (try && (PortP->PortState & PORT_ISOPEN)) {
- try--;
- if (time_after(jiffies, end_time)) {
- rio_dprintk(RIO_DEBUG_TTY, "Run out of tries - force the bugger shut!\n");
- RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE);
- break;
- }
- rio_dprintk(RIO_DEBUG_TTY, "Close: PortState:ISOPEN is %d\n", PortP->PortState & PORT_ISOPEN);
-
- if (p->RIOHalted) {
- RIOClearUp(PortP);
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- goto close_end;
- }
- if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_TTY, "RTA EINTR in delay \n");
- RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE);
- break;
- }
- }
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- rio_dprintk(RIO_DEBUG_TTY, "Close: try was %d on completion\n", try);
-
- /* RIOPreemptiveCmd(p, PortP, RIOC_FCLOSE); */
-
-/*
-** 15.10.1998 ARG - ESIL 0761 part fix
-** RIO has it's own CTSFLOW and RTSFLOW flags in 'Config' in the port structure,** we need to make sure that the flags are clear when the port is opened.
-*/
- PortP->Config &= ~(RIO_CTSFLOW | RIO_RTSFLOW);
-
- /*
- ** Count opens for port statistics reporting
- */
- if (PortP->statsGather)
- PortP->closes++;
-
-close_end:
- /* XXX: Why would a "DELETED" flag be reset here? I'd have
- thought that a "deleted" flag means that the port was
- permanently gone, but here we can make it reappear by it
- being in close during the "deletion".
- */
- PortP->State &= ~(RIO_CLOSING | RIO_DELETED);
- if (PortP->firstOpen)
- PortP->firstOpen--;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- rio_dprintk(RIO_DEBUG_TTY, "Return from close\n");
- return rv;
-}
-
-
-
-static void RIOClearUp(struct Port *PortP)
-{
- rio_dprintk(RIO_DEBUG_TTY, "RIOHalted set\n");
- PortP->Config = 0; /* Direct semaphore */
- PortP->PortState = 0;
- PortP->firstOpen = 0;
- PortP->FlushCmdBodge = 0;
- PortP->ModemState = PortP->CookMode = 0;
- PortP->Mapped = 0;
- PortP->WflushFlag = 0;
- PortP->MagicFlags = 0;
- PortP->RxDataStart = 0;
- PortP->TxBufferIn = 0;
- PortP->TxBufferOut = 0;
-}
-
-/*
-** Put a command onto a port.
-** The PortPointer, command, length and arg are passed.
-** The len is the length *inclusive* of the command byte,
-** and so for a command that takes no data, len==1.
-** The arg is a single byte, and is only used if len==2.
-** Other values of len aren't allowed, and will cause
-** a panic.
-*/
-int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len, int arg)
-{
- struct PKT __iomem *PacketP;
- int retries = 20; /* at 10 per second -> 2 seconds */
- unsigned long flags;
-
- rio_dprintk(RIO_DEBUG_TTY, "entering shortcommand.\n");
-
- if (PortP->State & RIO_DELETED) {
- rio_dprintk(RIO_DEBUG_TTY, "Short command to deleted RTA ignored\n");
- return RIO_FAIL;
- }
- rio_spin_lock_irqsave(&PortP->portSem, flags);
-
- /*
- ** If the port is in use for pre-emptive command, then wait for it to
- ** be free again.
- */
- while ((PortP->InUse != NOT_INUSE) && !p->RIOHalted) {
- rio_dprintk(RIO_DEBUG_TTY, "Waiting for not in use (%d)\n", retries);
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- if (retries-- <= 0) {
- return RIO_FAIL;
- }
- if (RIODelay_ni(PortP, HUNDRED_MS) == RIO_FAIL) {
- return RIO_FAIL;
- }
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- }
- if (PortP->State & RIO_DELETED) {
- rio_dprintk(RIO_DEBUG_TTY, "Short command to deleted RTA ignored\n");
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return RIO_FAIL;
- }
-
- while (!can_add_transmit(&PacketP, PortP) && !p->RIOHalted) {
- rio_dprintk(RIO_DEBUG_TTY, "Waiting to add short command to queue (%d)\n", retries);
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- if (retries-- <= 0) {
- rio_dprintk(RIO_DEBUG_TTY, "out of tries. Failing\n");
- return RIO_FAIL;
- }
- if (RIODelay_ni(PortP, HUNDRED_MS) == RIO_FAIL) {
- return RIO_FAIL;
- }
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- }
-
- if (p->RIOHalted) {
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return RIO_FAIL;
- }
-
- /*
- ** set the command byte and the argument byte
- */
- writeb(command, &PacketP->data[0]);
-
- if (len == 2)
- writeb(arg, &PacketP->data[1]);
-
- /*
- ** set the length of the packet and set the command bit.
- */
- writeb(PKT_CMD_BIT | len, &PacketP->len);
-
- add_transmit(PortP);
- /*
- ** Count characters transmitted for port statistics reporting
- */
- if (PortP->statsGather)
- PortP->txchars += len;
-
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return p->RIOHalted ? RIO_FAIL : ~RIO_FAIL;
-}
-
-
+++ /dev/null
-/****************************************************************************
- ******* *******
- ******* R O U T E H E A D E R
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra / Jeremy Rolls
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef _route_h
-#define _route_h
-
-#define MAX_LINKS 4
-#define MAX_NODES 17 /* Maximum nodes in a subnet */
-#define NODE_BYTES ((MAX_NODES / 8) + 1) /* Number of bytes needed for
- 1 bit per node */
-#define ROUTE_DATA_SIZE (NODE_BYTES + 2) /* Number of bytes for complete
- info about cost etc. */
-#define ROUTES_PER_PACKET ((PKT_MAX_DATA_LEN -2)/ ROUTE_DATA_SIZE)
- /* Number of nodes we can squeeze
- into one packet */
-#define MAX_TOPOLOGY_PACKETS (MAX_NODES / ROUTES_PER_PACKET + 1)
-/************************************************
- * Define the types of command for the ROUTE RUP.
- ************************************************/
-#define ROUTE_REQUEST 0 /* Request an ID */
-#define ROUTE_FOAD 1 /* Kill the RTA */
-#define ROUTE_ALREADY 2 /* ID given already */
-#define ROUTE_USED 3 /* All ID's used */
-#define ROUTE_ALLOCATE 4 /* Here it is */
-#define ROUTE_REQ_TOP 5 /* I bet you didn't expect....
- the Topological Inquisition */
-#define ROUTE_TOPOLOGY 6 /* Topology request answered FD */
-/*******************************************************************
- * Define the Route Map Structure
- *
- * The route map gives a pointer to a Link Structure to use.
- * This allows Disconnected Links to be checked quickly
- ******************************************************************/
-typedef struct COST_ROUTE COST_ROUTE;
-struct COST_ROUTE {
- unsigned char cost; /* Cost down this link */
- unsigned char route[NODE_BYTES]; /* Nodes through this route */
-};
-
-typedef struct ROUTE_STR ROUTE_STR;
-struct ROUTE_STR {
- COST_ROUTE cost_route[MAX_LINKS];
- /* cost / route for this link */
- ushort favoured; /* favoured link */
-};
-
-
-#define NO_LINK (short) 5 /* Link unattached */
-#define ROUTE_NO_ID (short) 100 /* No Id */
-#define ROUTE_DISCONNECT (ushort) 0xff /* Not connected */
-#define ROUTE_INTERCONNECT (ushort) 0x40 /* Sub-net interconnect */
-
-
-#define SYNC_RUP (ushort) 255
-#define COMMAND_RUP (ushort) 254
-#define ERROR_RUP (ushort) 253
-#define POLL_RUP (ushort) 252
-#define BOOT_RUP (ushort) 251
-#define ROUTE_RUP (ushort) 250
-#define STATUS_RUP (ushort) 249
-#define POWER_RUP (ushort) 248
-
-#define HIGHEST_RUP (ushort) 255 /* Set to Top one */
-#define LOWEST_RUP (ushort) 248 /* Set to bottom one */
-
-#endif
-
-/*********** end of file ***********/
+++ /dev/null
-/****************************************************************************
- ******* *******
- ******* R U P S T R U C T U R E
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef _rup_h
-#define _rup_h 1
-
-#define MAX_RUP ((short) 16)
-#define PKTS_PER_RUP ((short) 2) /* They are always used in pairs */
-
-/*************************************************
- * Define all the packet request stuff
- ************************************************/
-#define TX_RUP_INACTIVE 0 /* Nothing to transmit */
-#define TX_PACKET_READY 1 /* Transmit packet ready */
-#define TX_LOCK_RUP 2 /* Transmit side locked */
-
-#define RX_RUP_INACTIVE 0 /* Nothing received */
-#define RX_PACKET_READY 1 /* Packet received */
-
-#define RUP_NO_OWNER 0xff /* RUP not owned by any process */
-
-struct RUP {
- u16 txpkt; /* Outgoing packet */
- u16 rxpkt; /* Incoming packet */
- u16 link; /* Which link to send down? */
- u8 rup_dest_unit[2]; /* Destination unit */
- u16 handshake; /* For handshaking */
- u16 timeout; /* Timeout */
- u16 status; /* Status */
- u16 txcontrol; /* Transmit control */
- u16 rxcontrol; /* Receive control */
-};
-
-#endif
-
-/*********** end of file ***********/
+++ /dev/null
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : unixrup.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:20
-** Retrieved : 11/6/98 11:34:22
-**
-** ident @(#)unixrup.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_unixrup_h__
-#define __rio_unixrup_h__
-
-/*
-** UnixRup data structure. This contains pointers to actual RUPs on the
-** host card, and all the command/boot control stuff.
-*/
-struct UnixRup {
- struct CmdBlk *CmdsWaitingP; /* Commands waiting to be done */
- struct CmdBlk *CmdPendingP; /* The command currently being sent */
- struct RUP __iomem *RupP; /* the Rup to send it to */
- unsigned int Id; /* Id number */
- unsigned int BaseSysPort; /* SysPort of first tty on this RTA */
- unsigned int ModTypes; /* Modules on this RTA */
- spinlock_t RupLock; /* Lock structure for MPX */
- /* struct lockb RupLock; *//* Lock structure for MPX */
-};
-
-#endif /* __rio_unixrup_h__ */
+++ /dev/null
-/* drivers/char/ser_a2232.c */
-
-/* $Id: ser_a2232.c,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */
-
-/* Linux serial driver for the Amiga A2232 board */
-
-/* This driver is MAINTAINED. Before applying any changes, please contact
- * the author.
- */
-
-/* Copyright (c) 2000-2001 Enver Haase <ehaase@inf.fu-berlin.de>
- * alias The A2232 driver project <A2232@gmx.net>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-/***************************** Documentation ************************/
-/*
- * This driver is in EXPERIMENTAL state. That means I could not find
- * someone with five A2232 boards with 35 ports running at 19200 bps
- * at the same time and test the machine's behaviour.
- * However, I know that you can performance-tweak this driver (see
- * the source code).
- * One thing to consider is the time this driver consumes during the
- * Amiga's vertical blank interrupt. Everything that is to be done
- * _IS DONE_ when entering the vertical blank interrupt handler of
- * this driver.
- * However, it would be more sane to only do the job for only ONE card
- * instead of ALL cards at a time; or, more generally, to handle only
- * SOME ports instead of ALL ports at a time.
- * However, as long as no-one runs into problems I guess I shouldn't
- * change the driver as it runs fine for me :) .
- *
- * Version history of this file:
- * 0.4 Resolved licensing issues.
- * 0.3 Inclusion in the Linux/m68k tree, small fixes.
- * 0.2 Added documentation, minor typo fixes.
- * 0.1 Initial release.
- *
- * TO DO:
- * - Handle incoming BREAK events. I guess "Stevens: Advanced
- * Programming in the UNIX(R) Environment" is a good reference
- * on what is to be done.
- * - When installing as a module, don't simply 'printk' text, but
- * send it to the TTY used by the user.
- *
- * THANKS TO:
- * - Jukka Marin (65EC02 code).
- * - The other NetBSD developers on whose A2232 driver I had a
- * pretty close look. However, I didn't copy any code so it
- * is okay to put my code under the GPL and include it into
- * Linux.
- */
-/***************************** End of Documentation *****************/
-
-/***************************** Defines ******************************/
-/*
- * Enables experimental 115200 (normal) 230400 (turbo) baud rate.
- * The A2232 specification states it can only operate at speeds up to
- * 19200 bits per second, and I was not able to send a file via
- * "sz"/"rz" and a null-modem cable from one A2232 port to another
- * at 115200 bits per second.
- * However, this might work for you.
- */
-#undef A2232_SPEEDHACK
-/*
- * Default is not to use RTS/CTS so you could be talked to death.
- */
-#define A2232_SUPPRESS_RTSCTS_WARNING
-/************************* End of Defines ***************************/
-
-/***************************** Includes *****************************/
-#include <linux/module.h>
-
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/tty.h>
-
-#include <asm/setup.h>
-#include <asm/amigaints.h>
-#include <asm/amigahw.h>
-#include <linux/zorro.h>
-#include <asm/irq.h>
-#include <linux/mutex.h>
-
-#include <linux/delay.h>
-
-#include <linux/serial.h>
-#include <linux/generic_serial.h>
-#include <linux/tty_flip.h>
-
-#include "ser_a2232.h"
-#include "ser_a2232fw.h"
-/************************* End of Includes **************************/
-
-/***************************** Prototypes ***************************/
-/* The interrupt service routine */
-static irqreturn_t a2232_vbl_inter(int irq, void *data);
-/* Initialize the port structures */
-static void a2232_init_portstructs(void);
-/* Initialize and register TTY drivers. */
-/* returns 0 IFF successful */
-static int a2232_init_drivers(void);
-
-/* BEGIN GENERIC_SERIAL PROTOTYPES */
-static void a2232_disable_tx_interrupts(void *ptr);
-static void a2232_enable_tx_interrupts(void *ptr);
-static void a2232_disable_rx_interrupts(void *ptr);
-static void a2232_enable_rx_interrupts(void *ptr);
-static int a2232_carrier_raised(struct tty_port *port);
-static void a2232_shutdown_port(void *ptr);
-static int a2232_set_real_termios(void *ptr);
-static int a2232_chars_in_buffer(void *ptr);
-static void a2232_close(void *ptr);
-static void a2232_hungup(void *ptr);
-/* static void a2232_getserial (void *ptr, struct serial_struct *sp); */
-/* END GENERIC_SERIAL PROTOTYPES */
-
-/* Functions that the TTY driver struct expects */
-static int a2232_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg);
-static void a2232_throttle(struct tty_struct *tty);
-static void a2232_unthrottle(struct tty_struct *tty);
-static int a2232_open(struct tty_struct * tty, struct file * filp);
-/************************* End of Prototypes ************************/
-
-/***************************** Global variables *********************/
-/*---------------------------------------------------------------------------
- * Interface from generic_serial.c back here
- *--------------------------------------------------------------------------*/
-static struct real_driver a2232_real_driver = {
- a2232_disable_tx_interrupts,
- a2232_enable_tx_interrupts,
- a2232_disable_rx_interrupts,
- a2232_enable_rx_interrupts,
- a2232_shutdown_port,
- a2232_set_real_termios,
- a2232_chars_in_buffer,
- a2232_close,
- a2232_hungup,
- NULL /* a2232_getserial */
-};
-
-static void *a2232_driver_ID = &a2232_driver_ID; // Some memory address WE own.
-
-/* Ports structs */
-static struct a2232_port a2232_ports[MAX_A2232_BOARDS*NUMLINES];
-
-/* TTY driver structs */
-static struct tty_driver *a2232_driver;
-
-/* nr of cards completely (all ports) and correctly configured */
-static int nr_a2232;
-
-/* zorro_dev structs for the A2232's */
-static struct zorro_dev *zd_a2232[MAX_A2232_BOARDS];
-/***************************** End of Global variables **************/
-
-/* Helper functions */
-
-static inline volatile struct a2232memory *a2232mem(unsigned int board)
-{
- return (volatile struct a2232memory *)ZTWO_VADDR(zd_a2232[board]->resource.start);
-}
-
-static inline volatile struct a2232status *a2232stat(unsigned int board,
- unsigned int portonboard)
-{
- volatile struct a2232memory *mem = a2232mem(board);
- return &(mem->Status[portonboard]);
-}
-
-static inline void a2232_receive_char(struct a2232_port *port, int ch, int err)
-{
-/* Mostly stolen from other drivers.
- Maybe one could implement a more efficient version by not only
- transferring one character at a time.
-*/
- struct tty_struct *tty = port->gs.port.tty;
-
-#if 0
- switch(err) {
- case TTY_BREAK:
- break;
- case TTY_PARITY:
- break;
- case TTY_OVERRUN:
- break;
- case TTY_FRAME:
- break;
- }
-#endif
-
- tty_insert_flip_char(tty, ch, err);
- tty_flip_buffer_push(tty);
-}
-
-/***************************** Functions ****************************/
-/*** BEGIN OF REAL_DRIVER FUNCTIONS ***/
-
-static void a2232_disable_tx_interrupts(void *ptr)
-{
- struct a2232_port *port;
- volatile struct a2232status *stat;
- unsigned long flags;
-
- port = ptr;
- stat = a2232stat(port->which_a2232, port->which_port_on_a2232);
- stat->OutDisable = -1;
-
- /* Does this here really have to be? */
- local_irq_save(flags);
- port->gs.port.flags &= ~GS_TX_INTEN;
- local_irq_restore(flags);
-}
-
-static void a2232_enable_tx_interrupts(void *ptr)
-{
- struct a2232_port *port;
- volatile struct a2232status *stat;
- unsigned long flags;
-
- port = ptr;
- stat = a2232stat(port->which_a2232, port->which_port_on_a2232);
- stat->OutDisable = 0;
-
- /* Does this here really have to be? */
- local_irq_save(flags);
- port->gs.port.flags |= GS_TX_INTEN;
- local_irq_restore(flags);
-}
-
-static void a2232_disable_rx_interrupts(void *ptr)
-{
- struct a2232_port *port;
- port = ptr;
- port->disable_rx = -1;
-}
-
-static void a2232_enable_rx_interrupts(void *ptr)
-{
- struct a2232_port *port;
- port = ptr;
- port->disable_rx = 0;
-}
-
-static int a2232_carrier_raised(struct tty_port *port)
-{
- struct a2232_port *ap = container_of(port, struct a2232_port, gs.port);
- return ap->cd_status;
-}
-
-static void a2232_shutdown_port(void *ptr)
-{
- struct a2232_port *port;
- volatile struct a2232status *stat;
- unsigned long flags;
-
- port = ptr;
- stat = a2232stat(port->which_a2232, port->which_port_on_a2232);
-
- local_irq_save(flags);
-
- port->gs.port.flags &= ~GS_ACTIVE;
-
- if (port->gs.port.tty && port->gs.port.tty->termios->c_cflag & HUPCL) {
- /* Set DTR and RTS to Low, flush output.
- The NetBSD driver "msc.c" does it this way. */
- stat->Command = ( (stat->Command & ~A2232CMD_CMask) |
- A2232CMD_Close );
- stat->OutFlush = -1;
- stat->Setup = -1;
- }
-
- local_irq_restore(flags);
-
- /* After analyzing control flow, I think a2232_shutdown_port
- is actually the last call from the system when at application
- level someone issues a "echo Hello >>/dev/ttyY0".
- Therefore I think the MOD_DEC_USE_COUNT should be here and
- not in "a2232_close()". See the comment in "sx.c", too.
- If you run into problems, compile this driver into the
- kernel instead of compiling it as a module. */
-}
-
-static int a2232_set_real_termios(void *ptr)
-{
- unsigned int cflag, baud, chsize, stopb, parity, softflow;
- int rate;
- int a2232_param, a2232_cmd;
- unsigned long flags;
- unsigned int i;
- struct a2232_port *port = ptr;
- volatile struct a2232status *status;
- volatile struct a2232memory *mem;
-
- if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0;
-
- status = a2232stat(port->which_a2232, port->which_port_on_a2232);
- mem = a2232mem(port->which_a2232);
-
- a2232_param = a2232_cmd = 0;
-
- // get baud rate
- baud = port->gs.baud;
- if (baud == 0) {
- /* speed == 0 -> drop DTR, do nothing else */
- local_irq_save(flags);
- // Clear DTR (and RTS... mhhh).
- status->Command = ( (status->Command & ~A2232CMD_CMask) |
- A2232CMD_Close );
- status->OutFlush = -1;
- status->Setup = -1;
-
- local_irq_restore(flags);
- return 0;
- }
-
- rate = A2232_BAUD_TABLE_NOAVAIL;
- for (i=0; i < A2232_BAUD_TABLE_NUM_RATES * 3; i += 3){
- if (a2232_baud_table[i] == baud){
- if (mem->Common.Crystal == A2232_TURBO) rate = a2232_baud_table[i+2];
- else rate = a2232_baud_table[i+1];
- }
- }
- if (rate == A2232_BAUD_TABLE_NOAVAIL){
- printk("a2232: Board %d Port %d unsupported baud rate: %d baud. Using another.\n",port->which_a2232,port->which_port_on_a2232,baud);
- // This is useful for both (turbo or normal) Crystal versions.
- rate = A2232PARAM_B9600;
- }
- a2232_param |= rate;
-
- cflag = port->gs.port.tty->termios->c_cflag;
-
- // get character size
- chsize = cflag & CSIZE;
- switch (chsize){
- case CS8: a2232_param |= A2232PARAM_8Bit; break;
- case CS7: a2232_param |= A2232PARAM_7Bit; break;
- case CS6: a2232_param |= A2232PARAM_6Bit; break;
- case CS5: a2232_param |= A2232PARAM_5Bit; break;
- default: printk("a2232: Board %d Port %d unsupported character size: %d. Using 8 data bits.\n",
- port->which_a2232,port->which_port_on_a2232,chsize);
- a2232_param |= A2232PARAM_8Bit; break;
- }
-
- // get number of stop bits
- stopb = cflag & CSTOPB;
- if (stopb){ // two stop bits instead of one
- printk("a2232: Board %d Port %d 2 stop bits unsupported. Using 1 stop bit.\n",
- port->which_a2232,port->which_port_on_a2232);
- }
-
- // Warn if RTS/CTS not wanted
- if (!(cflag & CRTSCTS)){
-#ifndef A2232_SUPPRESS_RTSCTS_WARNING
- printk("a2232: Board %d Port %d cannot switch off firmware-implemented RTS/CTS hardware flow control.\n",
- port->which_a2232,port->which_port_on_a2232);
-#endif
- }
-
- /* I think this is correct.
- However, IXOFF means _input_ flow control and I wonder
- if one should care about IXON _output_ flow control,
- too. If this makes problems, one should turn the A2232
- firmware XON/XOFF "SoftFlow" flow control off and use
- the conventional way of inserting START/STOP characters
- by hand in throttle()/unthrottle().
- */
- softflow = !!( port->gs.port.tty->termios->c_iflag & IXOFF );
-
- // get Parity (Enabled/Disabled? If Enabled, Odd or Even?)
- parity = cflag & (PARENB | PARODD);
- if (parity & PARENB){
- if (parity & PARODD){
- a2232_cmd |= A2232CMD_OddParity;
- }
- else{
- a2232_cmd |= A2232CMD_EvenParity;
- }
- }
- else a2232_cmd |= A2232CMD_NoParity;
-
-
- /* Hmm. Maybe an own a2232_port structure
- member would be cleaner? */
- if (cflag & CLOCAL)
- port->gs.port.flags &= ~ASYNC_CHECK_CD;
- else
- port->gs.port.flags |= ASYNC_CHECK_CD;
-
-
- /* Now we have all parameters and can go to set them: */
- local_irq_save(flags);
-
- status->Param = a2232_param | A2232PARAM_RcvBaud;
- status->Command = a2232_cmd | A2232CMD_Open | A2232CMD_Enable;
- status->SoftFlow = softflow;
- status->OutDisable = 0;
- status->Setup = -1;
-
- local_irq_restore(flags);
- return 0;
-}
-
-static int a2232_chars_in_buffer(void *ptr)
-{
- struct a2232_port *port;
- volatile struct a2232status *status;
- unsigned char ret; /* we need modulo-256 arithmetics */
- port = ptr;
- status = a2232stat(port->which_a2232, port->which_port_on_a2232);
-#if A2232_IOBUFLEN != 256
-#error "Re-Implement a2232_chars_in_buffer()!"
-#endif
- ret = (status->OutHead - status->OutTail);
- return ret;
-}
-
-static void a2232_close(void *ptr)
-{
- a2232_disable_tx_interrupts(ptr);
- a2232_disable_rx_interrupts(ptr);
- /* see the comment in a2232_shutdown_port above. */
-}
-
-static void a2232_hungup(void *ptr)
-{
- a2232_close(ptr);
-}
-/*** END OF REAL_DRIVER FUNCTIONS ***/
-
-/*** BEGIN FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/
-static int a2232_ioctl( struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- return -ENOIOCTLCMD;
-}
-
-static void a2232_throttle(struct tty_struct *tty)
-{
-/* Throttle: System cannot take another chars: Drop RTS or
- send the STOP char or whatever.
- The A2232 firmware does RTS/CTS anyway, and XON/XOFF
- if switched on. So the only thing we can do at this
- layer here is not taking any characters out of the
- A2232 buffer any more. */
- struct a2232_port *port = tty->driver_data;
- port->throttle_input = -1;
-}
-
-static void a2232_unthrottle(struct tty_struct *tty)
-{
-/* Unthrottle: dual to "throttle()" above. */
- struct a2232_port *port = tty->driver_data;
- port->throttle_input = 0;
-}
-
-static int a2232_open(struct tty_struct * tty, struct file * filp)
-{
-/* More or less stolen from other drivers. */
- int line;
- int retval;
- struct a2232_port *port;
-
- line = tty->index;
- port = &a2232_ports[line];
-
- tty->driver_data = port;
- port->gs.port.tty = tty;
- port->gs.port.count++;
- retval = gs_init_port(&port->gs);
- if (retval) {
- port->gs.port.count--;
- return retval;
- }
- port->gs.port.flags |= GS_ACTIVE;
- retval = gs_block_til_ready(port, filp);
-
- if (retval) {
- port->gs.port.count--;
- return retval;
- }
-
- a2232_enable_rx_interrupts(port);
-
- return 0;
-}
-/*** END OF FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/
-
-static irqreturn_t a2232_vbl_inter(int irq, void *data)
-{
-#if A2232_IOBUFLEN != 256
-#error "Re-Implement a2232_vbl_inter()!"
-#endif
-
-struct a2232_port *port;
-volatile struct a2232memory *mem;
-volatile struct a2232status *status;
-unsigned char newhead;
-unsigned char bufpos; /* Must be unsigned char. We need the modulo-256 arithmetics */
-unsigned char ncd, ocd, ccd; /* names consistent with the NetBSD driver */
-volatile u_char *ibuf, *cbuf, *obuf;
-int ch, err, n, p;
- for (n = 0; n < nr_a2232; n++){ /* for every completely initialized A2232 board */
- mem = a2232mem(n);
- for (p = 0; p < NUMLINES; p++){ /* for every port on this board */
- err = 0;
- port = &a2232_ports[n*NUMLINES+p];
- if ( port->gs.port.flags & GS_ACTIVE ){ /* if the port is used */
-
- status = a2232stat(n,p);
-
- if (!port->disable_rx && !port->throttle_input){ /* If input is not disabled */
- newhead = status->InHead; /* 65EC02 write pointer */
- bufpos = status->InTail;
-
- /* check for input for this port */
- if (newhead != bufpos) {
- /* buffer for input chars/events */
- ibuf = mem->InBuf[p];
-
- /* data types of bytes in ibuf */
- cbuf = mem->InCtl[p];
-
- /* do for all chars */
- while (bufpos != newhead) {
- /* which type of input data? */
- switch (cbuf[bufpos]) {
- /* switch on input event (CD, BREAK, etc.) */
- case A2232INCTL_EVENT:
- switch (ibuf[bufpos++]) {
- case A2232EVENT_Break:
- /* TODO: Handle BREAK signal */
- break;
- /* A2232EVENT_CarrierOn and A2232EVENT_CarrierOff are
- handled in a separate queue and should not occur here. */
- case A2232EVENT_Sync:
- printk("A2232: 65EC02 software sent SYNC event, don't know what to do. Ignoring.");
- break;
- default:
- printk("A2232: 65EC02 software broken, unknown event type %d occurred.\n",ibuf[bufpos-1]);
- } /* event type switch */
- break;
- case A2232INCTL_CHAR:
- /* Receive incoming char */
- a2232_receive_char(port, ibuf[bufpos], err);
- bufpos++;
- break;
- default:
- printk("A2232: 65EC02 software broken, unknown data type %d occurred.\n",cbuf[bufpos]);
- bufpos++;
- } /* switch on input data type */
- } /* while there's something in the buffer */
-
- status->InTail = bufpos; /* tell 65EC02 what we've read */
-
- } /* if there was something in the buffer */
- } /* If input is not disabled */
-
- /* Now check if there's something to output */
- obuf = mem->OutBuf[p];
- bufpos = status->OutHead;
- while ( (port->gs.xmit_cnt > 0) &&
- (!port->gs.port.tty->stopped) &&
- (!port->gs.port.tty->hw_stopped) ){ /* While there are chars to transmit */
- if (((bufpos+1) & A2232_IOBUFLENMASK) != status->OutTail) { /* If the A2232 buffer is not full */
- ch = port->gs.xmit_buf[port->gs.xmit_tail]; /* get the next char to transmit */
- port->gs.xmit_tail = (port->gs.xmit_tail+1) & (SERIAL_XMIT_SIZE-1); /* modulo-addition for the gs.xmit_buf ring-buffer */
- obuf[bufpos++] = ch; /* put it into the A2232 buffer */
- port->gs.xmit_cnt--;
- }
- else{ /* If A2232 the buffer is full */
- break; /* simply stop filling it. */
- }
- }
- status->OutHead = bufpos;
-
- /* WakeUp if output buffer runs low */
- if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) {
- tty_wakeup(port->gs.port.tty);
- }
- } // if the port is used
- } // for every port on the board
-
- /* Now check the CD message queue */
- newhead = mem->Common.CDHead;
- bufpos = mem->Common.CDTail;
- if (newhead != bufpos){ /* There are CD events in queue */
- ocd = mem->Common.CDStatus; /* get old status bits */
- while (newhead != bufpos){ /* read all events */
- ncd = mem->CDBuf[bufpos++]; /* get one event */
- ccd = ncd ^ ocd; /* mask of changed lines */
- ocd = ncd; /* save new status bits */
- for(p=0; p < NUMLINES; p++){ /* for all ports */
- if (ccd & 1){ /* this one changed */
-
- struct a2232_port *port = &a2232_ports[n*7+p];
- port->cd_status = !(ncd & 1); /* ncd&1 <=> CD is now off */
-
- if (!(port->gs.port.flags & ASYNC_CHECK_CD))
- ; /* Don't report DCD changes */
- else if (port->cd_status) { // if DCD on: DCD went UP!
-
- /* Are we blocking in open?*/
- wake_up_interruptible(&port->gs.port.open_wait);
- }
- else { // if DCD off: DCD went DOWN!
- if (port->gs.port.tty)
- tty_hangup (port->gs.port.tty);
- }
-
- } // if CD changed for this port
- ccd >>= 1;
- ncd >>= 1; /* Shift bits for next line */
- } // for every port
- } // while CD events in queue
- mem->Common.CDStatus = ocd; /* save new status */
- mem->Common.CDTail = bufpos; /* remove events */
- } // if events in CD queue
-
- } // for every completely initialized A2232 board
- return IRQ_HANDLED;
-}
-
-static const struct tty_port_operations a2232_port_ops = {
- .carrier_raised = a2232_carrier_raised,
-};
-
-static void a2232_init_portstructs(void)
-{
- struct a2232_port *port;
- int i;
-
- for (i = 0; i < MAX_A2232_BOARDS*NUMLINES; i++) {
- port = a2232_ports + i;
- tty_port_init(&port->gs.port);
- port->gs.port.ops = &a2232_port_ops;
- port->which_a2232 = i/NUMLINES;
- port->which_port_on_a2232 = i%NUMLINES;
- port->disable_rx = port->throttle_input = port->cd_status = 0;
- port->gs.magic = A2232_MAGIC;
- port->gs.close_delay = HZ/2;
- port->gs.closing_wait = 30 * HZ;
- port->gs.rd = &a2232_real_driver;
- }
-}
-
-static const struct tty_operations a2232_ops = {
- .open = a2232_open,
- .close = gs_close,
- .write = gs_write,
- .put_char = gs_put_char,
- .flush_chars = gs_flush_chars,
- .write_room = gs_write_room,
- .chars_in_buffer = gs_chars_in_buffer,
- .flush_buffer = gs_flush_buffer,
- .ioctl = a2232_ioctl,
- .throttle = a2232_throttle,
- .unthrottle = a2232_unthrottle,
- .set_termios = gs_set_termios,
- .stop = gs_stop,
- .start = gs_start,
- .hangup = gs_hangup,
-};
-
-static int a2232_init_drivers(void)
-{
- int error;
-
- a2232_driver = alloc_tty_driver(NUMLINES * nr_a2232);
- if (!a2232_driver)
- return -ENOMEM;
- a2232_driver->owner = THIS_MODULE;
- a2232_driver->driver_name = "commodore_a2232";
- a2232_driver->name = "ttyY";
- a2232_driver->major = A2232_NORMAL_MAJOR;
- a2232_driver->type = TTY_DRIVER_TYPE_SERIAL;
- a2232_driver->subtype = SERIAL_TYPE_NORMAL;
- a2232_driver->init_termios = tty_std_termios;
- a2232_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- a2232_driver->init_termios.c_ispeed = 9600;
- a2232_driver->init_termios.c_ospeed = 9600;
- a2232_driver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(a2232_driver, &a2232_ops);
- if ((error = tty_register_driver(a2232_driver))) {
- printk(KERN_ERR "A2232: Couldn't register A2232 driver, error = %d\n",
- error);
- put_tty_driver(a2232_driver);
- return 1;
- }
- return 0;
-}
-
-static int __init a2232board_init(void)
-{
- struct zorro_dev *z;
-
- unsigned int boardaddr;
- int bcount;
- short start;
- u_char *from;
- volatile u_char *to;
- volatile struct a2232memory *mem;
- int error, i;
-
-#ifdef CONFIG_SMP
- return -ENODEV; /* This driver is not SMP aware. Is there an SMP ZorroII-bus-machine? */
-#endif
-
- if (!MACH_IS_AMIGA){
- return -ENODEV;
- }
-
- printk("Commodore A2232 driver initializing.\n"); /* Say that we're alive. */
-
- z = NULL;
- nr_a2232 = 0;
- while ( (z = zorro_find_device(ZORRO_WILDCARD, z)) ){
- if ( (z->id != ZORRO_PROD_CBM_A2232_PROTOTYPE) &&
- (z->id != ZORRO_PROD_CBM_A2232) ){
- continue; // The board found was no A2232
- }
- if (!zorro_request_device(z,"A2232 driver"))
- continue;
-
- printk("Commodore A2232 found (#%d).\n",nr_a2232);
-
- zd_a2232[nr_a2232] = z;
-
- boardaddr = ZTWO_VADDR( z->resource.start );
- printk("Board is located at address 0x%x, size is 0x%x.\n", boardaddr, (unsigned int) ((z->resource.end+1) - (z->resource.start)));
-
- mem = (volatile struct a2232memory *) boardaddr;
-
- (void) mem->Enable6502Reset; /* copy the code across to the board */
- to = (u_char *)mem; from = a2232_65EC02code; bcount = sizeof(a2232_65EC02code) - 2;
- start = *(short *)from;
- from += sizeof(start);
- to += start;
- while(bcount--) *to++ = *from++;
- printk("65EC02 software uploaded to the A2232 memory.\n");
-
- mem->Common.Crystal = A2232_UNKNOWN; /* use automatic speed check */
-
- /* start 6502 running */
- (void) mem->ResetBoard;
- printk("A2232's 65EC02 CPU up and running.\n");
-
- /* wait until speed detector has finished */
- for (bcount = 0; bcount < 2000; bcount++) {
- udelay(1000);
- if (mem->Common.Crystal)
- break;
- }
- printk((mem->Common.Crystal?"A2232 oscillator crystal detected by 65EC02 software: ":"65EC02 software could not determine A2232 oscillator crystal: "));
- switch (mem->Common.Crystal){
- case A2232_UNKNOWN:
- printk("Unknown crystal.\n");
- break;
- case A2232_NORMAL:
- printk ("Normal crystal.\n");
- break;
- case A2232_TURBO:
- printk ("Turbo crystal.\n");
- break;
- default:
- printk ("0x%x. Huh?\n",mem->Common.Crystal);
- }
-
- nr_a2232++;
-
- }
-
- printk("Total: %d A2232 boards initialized.\n", nr_a2232); /* Some status report if no card was found */
-
- a2232_init_portstructs();
-
- /*
- a2232_init_drivers also registers the drivers. Must be here because all boards
- have to be detected first.
- */
- if (a2232_init_drivers()) return -ENODEV; // maybe we should use a different -Exxx?
-
- error = request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0,
- "A2232 serial VBL", a2232_driver_ID);
- if (error) {
- for (i = 0; i < nr_a2232; i++)
- zorro_release_device(zd_a2232[i]);
- tty_unregister_driver(a2232_driver);
- put_tty_driver(a2232_driver);
- }
- return error;
-}
-
-static void __exit a2232board_exit(void)
-{
- int i;
-
- for (i = 0; i < nr_a2232; i++) {
- zorro_release_device(zd_a2232[i]);
- }
-
- tty_unregister_driver(a2232_driver);
- put_tty_driver(a2232_driver);
- free_irq(IRQ_AMIGA_VERTB, a2232_driver_ID);
-}
-
-module_init(a2232board_init);
-module_exit(a2232board_exit);
-
-MODULE_AUTHOR("Enver Haase");
-MODULE_DESCRIPTION("Amiga A2232 multi-serial board driver");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/* drivers/char/ser_a2232.h */
-
-/* $Id: ser_a2232.h,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */
-
-/* Linux serial driver for the Amiga A2232 board */
-
-/* This driver is MAINTAINED. Before applying any changes, please contact
- * the author.
- */
-
-/* Copyright (c) 2000-2001 Enver Haase <ehaase@inf.fu-berlin.de>
- * alias The A2232 driver project <A2232@gmx.net>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _SER_A2232_H_
-#define _SER_A2232_H_
-
-/*
- How many boards are to be supported at maximum;
- "up to five A2232 Multiport Serial Cards may be installed in a
- single Amiga 2000" states the A2232 User's Guide. If you have
- more slots available, you might want to change the value below.
-*/
-#define MAX_A2232_BOARDS 5
-
-#ifndef A2232_NORMAL_MAJOR
-/* This allows overriding on the compiler commandline, or in a "major.h"
- include or something like that */
-#define A2232_NORMAL_MAJOR 224 /* /dev/ttyY* */
-#define A2232_CALLOUT_MAJOR 225 /* /dev/cuy* */
-#endif
-
-/* Some magic is always good - Who knows :) */
-#define A2232_MAGIC 0x000a2232
-
-/* A2232 port structure to keep track of the
- status of every single line used */
-struct a2232_port{
- struct gs_port gs;
- unsigned int which_a2232;
- unsigned int which_port_on_a2232;
- short disable_rx;
- short throttle_input;
- short cd_status;
-};
-
-#define NUMLINES 7 /* number of lines per board */
-#define A2232_IOBUFLEN 256 /* number of bytes per buffer */
-#define A2232_IOBUFLENMASK 0xff /* mask for maximum number of bytes */
-
-
-#define A2232_UNKNOWN 0 /* crystal not known */
-#define A2232_NORMAL 1 /* normal A2232 (1.8432 MHz oscillator) */
-#define A2232_TURBO 2 /* turbo A2232 (3.6864 MHz oscillator) */
-
-
-struct a2232common {
- char Crystal; /* normal (1) or turbo (2) board? */
- u_char Pad_a;
- u_char TimerH; /* timer value after speed check */
- u_char TimerL;
- u_char CDHead; /* head pointer for CD message queue */
- u_char CDTail; /* tail pointer for CD message queue */
- u_char CDStatus;
- u_char Pad_b;
-};
-
-struct a2232status {
- u_char InHead; /* input queue head */
- u_char InTail; /* input queue tail */
- u_char OutDisable; /* disables output */
- u_char OutHead; /* output queue head */
- u_char OutTail; /* output queue tail */
- u_char OutCtrl; /* soft flow control character to send */
- u_char OutFlush; /* flushes output buffer */
- u_char Setup; /* causes reconfiguration */
- u_char Param; /* parameter byte - see A2232PARAM */
- u_char Command; /* command byte - see A2232CMD */
- u_char SoftFlow; /* enables xon/xoff flow control */
- /* private 65EC02 fields: */
- u_char XonOff; /* stores XON/XOFF enable/disable */
-};
-
-#define A2232_MEMPAD1 \
- (0x0200 - NUMLINES * sizeof(struct a2232status) - \
- sizeof(struct a2232common))
-#define A2232_MEMPAD2 (0x2000 - NUMLINES * A2232_IOBUFLEN - A2232_IOBUFLEN)
-
-struct a2232memory {
- struct a2232status Status[NUMLINES]; /* 0x0000-0x006f status areas */
- struct a2232common Common; /* 0x0070-0x0077 common flags */
- u_char Dummy1[A2232_MEMPAD1]; /* 0x00XX-0x01ff */
- u_char OutBuf[NUMLINES][A2232_IOBUFLEN];/* 0x0200-0x08ff output bufs */
- u_char InBuf[NUMLINES][A2232_IOBUFLEN]; /* 0x0900-0x0fff input bufs */
- u_char InCtl[NUMLINES][A2232_IOBUFLEN]; /* 0x1000-0x16ff control data */
- u_char CDBuf[A2232_IOBUFLEN]; /* 0x1700-0x17ff CD event buffer */
- u_char Dummy2[A2232_MEMPAD2]; /* 0x1800-0x2fff */
- u_char Code[0x1000]; /* 0x3000-0x3fff code area */
- u_short InterruptAck; /* 0x4000 intr ack */
- u_char Dummy3[0x3ffe]; /* 0x4002-0x7fff */
- u_short Enable6502Reset; /* 0x8000 Stop board, */
- /* 6502 RESET line held low */
- u_char Dummy4[0x3ffe]; /* 0x8002-0xbfff */
- u_short ResetBoard; /* 0xc000 reset board & run, */
- /* 6502 RESET line held high */
-};
-
-#undef A2232_MEMPAD1
-#undef A2232_MEMPAD2
-
-#define A2232INCTL_CHAR 0 /* corresponding byte in InBuf is a character */
-#define A2232INCTL_EVENT 1 /* corresponding byte in InBuf is an event */
-
-#define A2232EVENT_Break 1 /* break set */
-#define A2232EVENT_CarrierOn 2 /* carrier raised */
-#define A2232EVENT_CarrierOff 3 /* carrier dropped */
-#define A2232EVENT_Sync 4 /* don't know, defined in 2232.ax */
-
-#define A2232CMD_Enable 0x1 /* enable/DTR bit */
-#define A2232CMD_Close 0x2 /* close the device */
-#define A2232CMD_Open 0xb /* open the device */
-#define A2232CMD_CMask 0xf /* command mask */
-#define A2232CMD_RTSOff 0x0 /* turn off RTS */
-#define A2232CMD_RTSOn 0x8 /* turn on RTS */
-#define A2232CMD_Break 0xd /* transmit a break */
-#define A2232CMD_RTSMask 0xc /* mask for RTS stuff */
-#define A2232CMD_NoParity 0x00 /* don't use parity */
-#define A2232CMD_OddParity 0x20 /* odd parity */
-#define A2232CMD_EvenParity 0x60 /* even parity */
-#define A2232CMD_ParityMask 0xe0 /* parity mask */
-
-#define A2232PARAM_B115200 0x0 /* baud rates */
-#define A2232PARAM_B50 0x1
-#define A2232PARAM_B75 0x2
-#define A2232PARAM_B110 0x3
-#define A2232PARAM_B134 0x4
-#define A2232PARAM_B150 0x5
-#define A2232PARAM_B300 0x6
-#define A2232PARAM_B600 0x7
-#define A2232PARAM_B1200 0x8
-#define A2232PARAM_B1800 0x9
-#define A2232PARAM_B2400 0xa
-#define A2232PARAM_B3600 0xb
-#define A2232PARAM_B4800 0xc
-#define A2232PARAM_B7200 0xd
-#define A2232PARAM_B9600 0xe
-#define A2232PARAM_B19200 0xf
-#define A2232PARAM_BaudMask 0xf /* baud rate mask */
-#define A2232PARAM_RcvBaud 0x10 /* enable receive baud rate */
-#define A2232PARAM_8Bit 0x00 /* numbers of bits */
-#define A2232PARAM_7Bit 0x20
-#define A2232PARAM_6Bit 0x40
-#define A2232PARAM_5Bit 0x60
-#define A2232PARAM_BitMask 0x60 /* numbers of bits mask */
-
-
-/* Standard speeds tables, -1 means unavailable, -2 means 0 baud: switch off line */
-#define A2232_BAUD_TABLE_NOAVAIL -1
-#define A2232_BAUD_TABLE_NUM_RATES (18)
-static int a2232_baud_table[A2232_BAUD_TABLE_NUM_RATES*3] = {
- //Baud //Normal //Turbo
- 50, A2232PARAM_B50, A2232_BAUD_TABLE_NOAVAIL,
- 75, A2232PARAM_B75, A2232_BAUD_TABLE_NOAVAIL,
- 110, A2232PARAM_B110, A2232_BAUD_TABLE_NOAVAIL,
- 134, A2232PARAM_B134, A2232_BAUD_TABLE_NOAVAIL,
- 150, A2232PARAM_B150, A2232PARAM_B75,
- 200, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL,
- 300, A2232PARAM_B300, A2232PARAM_B150,
- 600, A2232PARAM_B600, A2232PARAM_B300,
- 1200, A2232PARAM_B1200, A2232PARAM_B600,
- 1800, A2232PARAM_B1800, A2232_BAUD_TABLE_NOAVAIL,
- 2400, A2232PARAM_B2400, A2232PARAM_B1200,
- 4800, A2232PARAM_B4800, A2232PARAM_B2400,
- 9600, A2232PARAM_B9600, A2232PARAM_B4800,
- 19200, A2232PARAM_B19200, A2232PARAM_B9600,
- 38400, A2232_BAUD_TABLE_NOAVAIL, A2232PARAM_B19200,
- 57600, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL,
-#ifdef A2232_SPEEDHACK
- 115200, A2232PARAM_B115200, A2232_BAUD_TABLE_NOAVAIL,
- 230400, A2232_BAUD_TABLE_NOAVAIL, A2232PARAM_B115200
-#else
- 115200, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL,
- 230400, A2232_BAUD_TABLE_NOAVAIL, A2232_BAUD_TABLE_NOAVAIL
-#endif
-};
-#endif
+++ /dev/null
-;.lib "axm"
-;
-;begin
-;title "A2232 serial board driver"
-;
-;set modules "2232"
-;set executable "2232.bin"
-;
-;;;;set nolink
-;
-;set temporary directory "t:"
-;
-;set assembly options "-m6502 -l60:t:list"
-;set link options "bin"; loadadr"
-;;;bin2c 2232.bin msc6502.h msc6502code
-;end
-;
-;
-; ### Commodore A2232 serial board driver for NetBSD by JM v1.3 ###
-;
-; - Created 950501 by JM -
-;
-;
-; Serial board driver software.
-;
-;
-% Copyright (c) 1995 Jukka Marin <jmarin@jmp.fi>.
-% All rights reserved.
-%
-% Redistribution and use in source and binary forms, with or without
-% modification, are permitted provided that the following conditions
-% are met:
-% 1. Redistributions of source code must retain the above copyright
-% notice, and the entire permission notice in its entirety,
-% including the disclaimer of warranties.
-% 2. Redistributions in binary form must reproduce the above copyright
-% notice, this list of conditions and the following disclaimer in the
-% documentation and/or other materials provided with the distribution.
-% 3. The name of the author may not be used to endorse or promote
-% products derived from this software without specific prior
-% written permission.
-%
-% ALTERNATIVELY, this product may be distributed under the terms of
-% the GNU General Public License, in which case the provisions of the
-% GPL are required INSTEAD OF the above restrictions. (This clause is
-% necessary due to a potential bad interaction between the GPL and
-% the restrictions contained in a BSD-style copyright.)
-%
-% THIS SOFTWARE IS PROVIDED `AS IS'' AND ANY EXPRESS OR IMPLIED
-% WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-% OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-% DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
-% INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-% (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-% SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-% HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-% STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-% ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
-% OF THE POSSIBILITY OF SUCH DAMAGE.
-;
-;
-; Bugs:
-;
-; - Can't send a break yet
-;
-;
-;
-; Edited:
-;
-; - 950501 by JM -> v0.1 - Created this file.
-; - 951029 by JM -> v1.3 - Carrier Detect events now queued in a separate
-; queue.
-;
-;
-
-
-CODE equ $3800 ; start address for program code
-
-
-CTL_CHAR equ $00 ; byte in ibuf is a character
-CTL_EVENT equ $01 ; byte in ibuf is an event
-
-EVENT_BREAK equ $01
-EVENT_CDON equ $02
-EVENT_CDOFF equ $03
-EVENT_SYNC equ $04
-
-XON equ $11
-XOFF equ $13
-
-
-VARBASE macro *starting_address ; was VARINIT
-_varbase set \1
- endm
-
-VARDEF macro *name space_needs
-\1 equ _varbase
-_varbase set _varbase+\2
- endm
-
-
-stz macro * address
- db $64,\1
- endm
-
-stzax macro * address
- db $9e,<\1,>\1
- endm
-
-
-biti macro * immediate value
- db $89,\1
- endm
-
-smb0 macro * address
- db $87,\1
- endm
-smb1 macro * address
- db $97,\1
- endm
-smb2 macro * address
- db $a7,\1
- endm
-smb3 macro * address
- db $b7,\1
- endm
-smb4 macro * address
- db $c7,\1
- endm
-smb5 macro * address
- db $d7,\1
- endm
-smb6 macro * address
- db $e7,\1
- endm
-smb7 macro * address
- db $f7,\1
- endm
-
-
-
-;-----------------------------------------------------------------------;
-; ;
-; stuff common for all ports, non-critical (run once / loop) ;
-; ;
-DO_SLOW macro * port_number ;
- .local ; ;
- lda CIA+C_PA ; check all CD inputs ;
- cmp CommonCDo ; changed from previous accptd? ;
- beq =over ; nope, do nothing else here ;
- ; ;
- cmp CommonCDb ; bouncing? ;
- beq =nobounce ; nope -> ;
- ; ;
- sta CommonCDb ; save current state ;
- lda #64 ; reinitialize counter ;
- sta CommonCDc ; ;
- jmp =over ; skip CD save ;
- ; ;
-=nobounce dec CommonCDc ; no, decrement bounce counter ;
- bpl =over ; not done yet, so skip CD save ;
- ; ;
-=saveCD ldx CDHead ; get write index ;
- sta cdbuf,x ; save status in buffer ;
- inx ; ;
- cpx CDTail ; buffer full? ;
- .if ne ; no: preserve status: ;
- stx CDHead ; update index in RAM ;
- sta CommonCDo ; save state for the next check ;
- .end ; ;
-=over .end local ;
- endm ;
- ;
-;-----------------------------------------------------------------------;
-
-
-; port specific stuff (no data transfer)
-
-DO_PORT macro * port_number
- .local ; ;
- lda SetUp\1 ; reconfiguration request? ;
- .if ne ; yes: ;
- lda SoftFlow\1 ; get XON/XOFF flag ;
- sta XonOff\1 ; save it ;
- lda Param\1 ; get parameter ;
- ora #%00010000 ; use baud generator for Rx ;
- sta ACIA\1+A_CTRL ; store in control register ;
- stz OutDisable\1 ; enable transmit output ;
- stz SetUp\1 ; no reconfiguration no more ;
- .end ; ;
- ; ;
- lda InHead\1 ; get write index ;
- sbc InTail\1 ; buffer full soon? ;
- cmp #200 ; 200 chars or more in buffer? ;
- lda Command\1 ; get Command reg value ;
- and #%11110011 ; turn RTS OFF by default ;
- .if cc ; still room in buffer: ;
- ora #%00001000 ; turn RTS ON ;
- .end ; ;
- sta ACIA\1+A_CMD ; set/clear RTS ;
- ; ;
- lda OutFlush\1 ; request to flush output buffer;
- .if ne ; yessh! ;
- lda OutHead\1 ; get head ;
- sta OutTail\1 ; save as tail ;
- stz OutDisable\1 ; enable transmit output ;
- stz OutFlush\1 ; clear request ;
- .end
- .end local
- endm
-
-
-DO_DATA macro * port number
- .local
- lda ACIA\1+A_SR ; read ACIA status register ;
- biti [1<<3] ; something received? ;
- .if ne ; yes: ;
- biti [1<<1] ; framing error? ;
- .if ne ; yes: ;
- lda ACIA\1+A_DATA ; read received character ;
- bne =SEND ; not break -> ignore it ;
- ldx InHead\1 ; get write pointer ;
- lda #CTL_EVENT ; get type of byte ;
- sta ictl\1,x ; save it in InCtl buffer ;
- lda #EVENT_BREAK ; event code ;
- sta ibuf\1,x ; save it as well ;
- inx ; ;
- cpx InTail\1 ; still room in buffer? ;
- .if ne ; absolutely: ;
- stx InHead\1 ; update index in memory ;
- .end ; ;
- jmp =SEND ; go check if anything to send ;
- .end ; ;
- ; normal char received: ;
- ldx InHead\1 ; get write index ;
- lda ACIA\1+A_DATA ; read received character ;
- sta ibuf\1,x ; save char in buffer ;
- stzax ictl\1 ; set type to CTL_CHAR ;
- inx ; ;
- cpx InTail\1 ; buffer full? ;
- .if ne ; no: preserve character: ;
- stx InHead\1 ; update index in RAM ;
- .end ; ;
- and #$7f ; mask off parity if any ;
- cmp #XOFF ; XOFF from remote host? ;
- .if eq ; yes: ;
- lda XonOff\1 ; if XON/XOFF handshaking.. ;
- sta OutDisable\1 ; ..disable transmitter ;
- .end ; ;
- .end ; ;
- ; ;
- ; BUFFER FULL CHECK WAS HERE ;
- ; ;
-=SEND lda ACIA\1+A_SR ; transmit register empty? ;
- and #[1<<4] ; ;
- .if ne ; yes: ;
- ldx OutCtrl\1 ; sending out XON/XOFF? ;
- .if ne ; yes: ;
- lda CIA+C_PB ; check CTS signal ;
- and #[1<<\1] ; (for this port only) ;
- bne =DONE ; not allowed to send -> done ;
- stx ACIA\1+A_DATA ; transmit control char ;
- stz OutCtrl\1 ; clear flag ;
- jmp =DONE ; and we're done ;
- .end ; ;
- ; ;
- ldx OutTail\1 ; anything to transmit? ;
- cpx OutHead\1 ; ;
- .if ne ; yes: ;
- lda OutDisable\1 ; allowed to transmit? ;
- .if eq ; yes: ;
- lda CIA+C_PB ; check CTS signal ;
- and #[1<<\1] ; (for this port only) ;
- bne =DONE ; not allowed to send -> done ;
- lda obuf\1,x ; get a char from buffer ;
- sta ACIA\1+A_DATA ; send it away ;
- inc OutTail\1 ; update read index ;
- .end ; ;
- .end ; ;
- .end ; ;
-=DONE .end local
- endm
-
-
-
-PORTVAR macro * port number
- VARDEF InHead\1 1
- VARDEF InTail\1 1
- VARDEF OutDisable\1 1
- VARDEF OutHead\1 1
- VARDEF OutTail\1 1
- VARDEF OutCtrl\1 1
- VARDEF OutFlush\1 1
- VARDEF SetUp\1 1
- VARDEF Param\1 1
- VARDEF Command\1 1
- VARDEF SoftFlow\1 1
- ; private:
- VARDEF XonOff\1 1
- endm
-
-
- VARBASE 0 ; start variables at address $0000
- PORTVAR 0 ; define variables for port 0
- PORTVAR 1 ; define variables for port 1
- PORTVAR 2 ; define variables for port 2
- PORTVAR 3 ; define variables for port 3
- PORTVAR 4 ; define variables for port 4
- PORTVAR 5 ; define variables for port 5
- PORTVAR 6 ; define variables for port 6
-
-
-
- VARDEF Crystal 1 ; 0 = unknown, 1 = normal, 2 = turbo
- VARDEF Pad_a 1
- VARDEF TimerH 1
- VARDEF TimerL 1
- VARDEF CDHead 1
- VARDEF CDTail 1
- VARDEF CDStatus 1
- VARDEF Pad_b 1
-
- VARDEF CommonCDo 1 ; for carrier detect optimization
- VARDEF CommonCDc 1 ; for carrier detect debouncing
- VARDEF CommonCDb 1 ; for carrier detect debouncing
-
-
- VARBASE $0200
- VARDEF obuf0 256 ; output data (characters only)
- VARDEF obuf1 256
- VARDEF obuf2 256
- VARDEF obuf3 256
- VARDEF obuf4 256
- VARDEF obuf5 256
- VARDEF obuf6 256
-
- VARDEF ibuf0 256 ; input data (characters, events etc - see ictl)
- VARDEF ibuf1 256
- VARDEF ibuf2 256
- VARDEF ibuf3 256
- VARDEF ibuf4 256
- VARDEF ibuf5 256
- VARDEF ibuf6 256
-
- VARDEF ictl0 256 ; input control information (type of data in ibuf)
- VARDEF ictl1 256
- VARDEF ictl2 256
- VARDEF ictl3 256
- VARDEF ictl4 256
- VARDEF ictl5 256
- VARDEF ictl6 256
-
- VARDEF cdbuf 256 ; CD event queue
-
-
-ACIA0 equ $4400
-ACIA1 equ $4c00
-ACIA2 equ $5400
-ACIA3 equ $5c00
-ACIA4 equ $6400
-ACIA5 equ $6c00
-ACIA6 equ $7400
-
-A_DATA equ $00
-A_SR equ $02
-A_CMD equ $04
-A_CTRL equ $06
-; 00 write transmit data read received data
-; 02 reset ACIA read status register
-; 04 write command register read command register
-; 06 write control register read control register
-
-CIA equ $7c00 ; 8520 CIA
-C_PA equ $00 ; port A data register
-C_PB equ $02 ; port B data register
-C_DDRA equ $04 ; data direction register for port A
-C_DDRB equ $06 ; data direction register for port B
-C_TAL equ $08 ; timer A
-C_TAH equ $0a
-C_TBL equ $0c ; timer B
-C_TBH equ $0e
-C_TODL equ $10 ; TOD LSB
-C_TODM equ $12 ; TOD middle byte
-C_TODH equ $14 ; TOD MSB
-C_DATA equ $18 ; serial data register
-C_INTCTRL equ $1a ; interrupt control register
-C_CTRLA equ $1c ; control register A
-C_CTRLB equ $1e ; control register B
-
-
-
-
-
- section main,code,CODE-2
-
- db >CODE,<CODE
-
-;-----------------------------------------------------------------------;
-; here's the initialization code: ;
-; ;
-R_RESET ldx #$ff ;
- txs ; initialize stack pointer ;
- cld ; in case a 6502 is used... ;
- ldx #0 ; ;
- lda #0 ; ;
- ldy #Crystal ; this many bytes to clear ;
-clr_loop sta 0,x ; clear zero page variables ;
- inx ; ;
- dey ; ;
- bne clr_loop ; ;
- ; ;
- stz CommonCDo ; force CD test at boot ;
- stz CommonCDb ; ;
- stz CDHead ; clear queue ;
- stz CDTail ; ;
- ; ;
- lda #0 ; ;
- sta Pad_a ; ;
- lda #170 ; test cmp ;
- cmp #100 ; ;
- .if cs ; ;
- inc Pad_a ; C was set ;
- .end ; ;
- ;
-;-----------------------------------------------------------------------;
-; Speed check ;
-;-----------------------------------------------------------------------;
- ;
- lda Crystal ; speed already set? ;
- beq DoSpeedy ; ;
- jmp LOOP ; yes, skip speed test ;
- ; ;
-DoSpeedy lda #%10011000 ; 8N1, 1200/2400 bps ;
- sta ACIA0+A_CTRL ; ;
- lda #%00001011 ; enable DTR ;
- sta ACIA0+A_CMD ; ;
- lda ACIA0+A_SR ; read status register ;
- ; ;
- lda #%10000000 ; disable all ints (unnecessary);
- sta CIA+C_INTCTRL ; ;
- lda #255 ; program the timer ;
- sta CIA+C_TAL ; ;
- sta CIA+C_TAH ; ;
- ; ;
- ldx #0 ; ;
- stx ACIA0+A_DATA ; transmit a zero ;
- nop ; ;
- nop ; ;
- lda ACIA0+A_SR ; read status ;
- nop ; ;
- nop ; ;
- stx ACIA0+A_DATA ; transmit a zero ;
-Speedy1 lda ACIA0+A_SR ; read status ;
- and #[1<<4] ; transmit data reg empty? ;
- beq Speedy1 ; not yet, wait more ;
- ; ;
- lda #%00010001 ; load & start the timer ;
- stx ACIA0+A_DATA ; transmit one more zero ;
- sta CIA+C_CTRLA ; ;
-Speedy2 lda ACIA0+A_SR ; read status ;
- and #[1<<4] ; transmit data reg empty? ;
- beq Speedy2 ; not yet, wait more ;
- stx CIA+C_CTRLA ; stop the timer ;
- ; ;
- lda CIA+C_TAL ; copy timer value for 68k ;
- sta TimerL ; ;
- lda CIA+C_TAH ; ;
- sta TimerH ; ;
- cmp #$d0 ; turbo or normal? ;
- .if cs ; ;
- lda #2 ; turbo! :-) ;
- .else ; ;
- lda #1 ; normal :-( ;
- .end ; ;
- sta Crystal ; ;
- lda #0 ; ;
- sta ACIA0+A_SR ; ;
- sta ACIA0+A_CTRL ; reset UART ;
- sta ACIA0+A_CMD ; ;
- ;
- jmp LOOP ;
- ;
-; ;
-;-----------------------------------------------------------------------;
-; ;
-; The Real Thing: ;
-; ;
-LOOP DO_SLOW ; do non-critical things ;
- jsr do_input ; check for received data
- DO_PORT 0
- jsr do_input
- DO_PORT 1
- jsr do_input
- DO_PORT 2
- jsr do_input
- DO_PORT 3
- jsr do_input
- DO_PORT 4
- jsr do_input
- DO_PORT 5
- jsr do_input
- DO_PORT 6
- jsr do_input
- jmp LOOP
-
-
-do_input DO_DATA 0
- DO_DATA 1
- DO_DATA 2
- DO_DATA 3
- DO_DATA 4
- DO_DATA 5
- DO_DATA 6
- rts
-
-
-;-----------------------------------------------------------------------;
- section vectors,data,$3ffa
- dw $d0d0
- dw R_RESET
- dw $c0ce
-;-----------------------------------------------------------------------;
-
-
-
- end
-
-
-
+++ /dev/null
-/* drivers/char/ser_a2232fw.h */
-
-/* $Id: ser_a2232fw.h,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */
-
-/*
- * Copyright (c) 1995 Jukka Marin <jmarin@jmp.fi>.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, and the entire permission notice in its entirety,
- * including the disclaimer of warranties.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- * products derived from this software without specific prior
- * written permission.
- *
- * ALTERNATIVELY, this product may be distributed under the terms of
- * the GNU Public License, in which case the provisions of the GPL are
- * required INSTEAD OF the above restrictions. (This clause is
- * necessary due to a potential bad interaction between the GPL and
- * the restrictions contained in a BSD-style copyright.)
- *
- * THIS SOFTWARE IS PROVIDED `AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-/* This is the 65EC02 code by Jukka Marin that is executed by
- the A2232's 65EC02 processor (base address: 0x3800)
- Source file: ser_a2232fw.ax
- Version: 1.3 (951029)
- Known Bugs: Cannot send a break yet
-*/
-static unsigned char a2232_65EC02code[] = {
- 0x38, 0x00, 0xA2, 0xFF, 0x9A, 0xD8, 0xA2, 0x00,
- 0xA9, 0x00, 0xA0, 0x54, 0x95, 0x00, 0xE8, 0x88,
- 0xD0, 0xFA, 0x64, 0x5C, 0x64, 0x5E, 0x64, 0x58,
- 0x64, 0x59, 0xA9, 0x00, 0x85, 0x55, 0xA9, 0xAA,
- 0xC9, 0x64, 0x90, 0x02, 0xE6, 0x55, 0xA5, 0x54,
- 0xF0, 0x03, 0x4C, 0x92, 0x38, 0xA9, 0x98, 0x8D,
- 0x06, 0x44, 0xA9, 0x0B, 0x8D, 0x04, 0x44, 0xAD,
- 0x02, 0x44, 0xA9, 0x80, 0x8D, 0x1A, 0x7C, 0xA9,
- 0xFF, 0x8D, 0x08, 0x7C, 0x8D, 0x0A, 0x7C, 0xA2,
- 0x00, 0x8E, 0x00, 0x44, 0xEA, 0xEA, 0xAD, 0x02,
- 0x44, 0xEA, 0xEA, 0x8E, 0x00, 0x44, 0xAD, 0x02,
- 0x44, 0x29, 0x10, 0xF0, 0xF9, 0xA9, 0x11, 0x8E,
- 0x00, 0x44, 0x8D, 0x1C, 0x7C, 0xAD, 0x02, 0x44,
- 0x29, 0x10, 0xF0, 0xF9, 0x8E, 0x1C, 0x7C, 0xAD,
- 0x08, 0x7C, 0x85, 0x57, 0xAD, 0x0A, 0x7C, 0x85,
- 0x56, 0xC9, 0xD0, 0x90, 0x05, 0xA9, 0x02, 0x4C,
- 0x82, 0x38, 0xA9, 0x01, 0x85, 0x54, 0xA9, 0x00,
- 0x8D, 0x02, 0x44, 0x8D, 0x06, 0x44, 0x8D, 0x04,
- 0x44, 0x4C, 0x92, 0x38, 0xAD, 0x00, 0x7C, 0xC5,
- 0x5C, 0xF0, 0x1F, 0xC5, 0x5E, 0xF0, 0x09, 0x85,
- 0x5E, 0xA9, 0x40, 0x85, 0x5D, 0x4C, 0xB8, 0x38,
- 0xC6, 0x5D, 0x10, 0x0E, 0xA6, 0x58, 0x9D, 0x00,
- 0x17, 0xE8, 0xE4, 0x59, 0xF0, 0x04, 0x86, 0x58,
- 0x85, 0x5C, 0x20, 0x23, 0x3A, 0xA5, 0x07, 0xF0,
- 0x0F, 0xA5, 0x0A, 0x85, 0x0B, 0xA5, 0x08, 0x09,
- 0x10, 0x8D, 0x06, 0x44, 0x64, 0x02, 0x64, 0x07,
- 0xA5, 0x00, 0xE5, 0x01, 0xC9, 0xC8, 0xA5, 0x09,
- 0x29, 0xF3, 0xB0, 0x02, 0x09, 0x08, 0x8D, 0x04,
- 0x44, 0xA5, 0x06, 0xF0, 0x08, 0xA5, 0x03, 0x85,
- 0x04, 0x64, 0x02, 0x64, 0x06, 0x20, 0x23, 0x3A,
- 0xA5, 0x13, 0xF0, 0x0F, 0xA5, 0x16, 0x85, 0x17,
- 0xA5, 0x14, 0x09, 0x10, 0x8D, 0x06, 0x4C, 0x64,
- 0x0E, 0x64, 0x13, 0xA5, 0x0C, 0xE5, 0x0D, 0xC9,
- 0xC8, 0xA5, 0x15, 0x29, 0xF3, 0xB0, 0x02, 0x09,
- 0x08, 0x8D, 0x04, 0x4C, 0xA5, 0x12, 0xF0, 0x08,
- 0xA5, 0x0F, 0x85, 0x10, 0x64, 0x0E, 0x64, 0x12,
- 0x20, 0x23, 0x3A, 0xA5, 0x1F, 0xF0, 0x0F, 0xA5,
- 0x22, 0x85, 0x23, 0xA5, 0x20, 0x09, 0x10, 0x8D,
- 0x06, 0x54, 0x64, 0x1A, 0x64, 0x1F, 0xA5, 0x18,
- 0xE5, 0x19, 0xC9, 0xC8, 0xA5, 0x21, 0x29, 0xF3,
- 0xB0, 0x02, 0x09, 0x08, 0x8D, 0x04, 0x54, 0xA5,
- 0x1E, 0xF0, 0x08, 0xA5, 0x1B, 0x85, 0x1C, 0x64,
- 0x1A, 0x64, 0x1E, 0x20, 0x23, 0x3A, 0xA5, 0x2B,
- 0xF0, 0x0F, 0xA5, 0x2E, 0x85, 0x2F, 0xA5, 0x2C,
- 0x09, 0x10, 0x8D, 0x06, 0x5C, 0x64, 0x26, 0x64,
- 0x2B, 0xA5, 0x24, 0xE5, 0x25, 0xC9, 0xC8, 0xA5,
- 0x2D, 0x29, 0xF3, 0xB0, 0x02, 0x09, 0x08, 0x8D,
- 0x04, 0x5C, 0xA5, 0x2A, 0xF0, 0x08, 0xA5, 0x27,
- 0x85, 0x28, 0x64, 0x26, 0x64, 0x2A, 0x20, 0x23,
- 0x3A, 0xA5, 0x37, 0xF0, 0x0F, 0xA5, 0x3A, 0x85,
- 0x3B, 0xA5, 0x38, 0x09, 0x10, 0x8D, 0x06, 0x64,
- 0x64, 0x32, 0x64, 0x37, 0xA5, 0x30, 0xE5, 0x31,
- 0xC9, 0xC8, 0xA5, 0x39, 0x29, 0xF3, 0xB0, 0x02,
- 0x09, 0x08, 0x8D, 0x04, 0x64, 0xA5, 0x36, 0xF0,
- 0x08, 0xA5, 0x33, 0x85, 0x34, 0x64, 0x32, 0x64,
- 0x36, 0x20, 0x23, 0x3A, 0xA5, 0x43, 0xF0, 0x0F,
- 0xA5, 0x46, 0x85, 0x47, 0xA5, 0x44, 0x09, 0x10,
- 0x8D, 0x06, 0x6C, 0x64, 0x3E, 0x64, 0x43, 0xA5,
- 0x3C, 0xE5, 0x3D, 0xC9, 0xC8, 0xA5, 0x45, 0x29,
- 0xF3, 0xB0, 0x02, 0x09, 0x08, 0x8D, 0x04, 0x6C,
- 0xA5, 0x42, 0xF0, 0x08, 0xA5, 0x3F, 0x85, 0x40,
- 0x64, 0x3E, 0x64, 0x42, 0x20, 0x23, 0x3A, 0xA5,
- 0x4F, 0xF0, 0x0F, 0xA5, 0x52, 0x85, 0x53, 0xA5,
- 0x50, 0x09, 0x10, 0x8D, 0x06, 0x74, 0x64, 0x4A,
- 0x64, 0x4F, 0xA5, 0x48, 0xE5, 0x49, 0xC9, 0xC8,
- 0xA5, 0x51, 0x29, 0xF3, 0xB0, 0x02, 0x09, 0x08,
- 0x8D, 0x04, 0x74, 0xA5, 0x4E, 0xF0, 0x08, 0xA5,
- 0x4B, 0x85, 0x4C, 0x64, 0x4A, 0x64, 0x4E, 0x20,
- 0x23, 0x3A, 0x4C, 0x92, 0x38, 0xAD, 0x02, 0x44,
- 0x89, 0x08, 0xF0, 0x3B, 0x89, 0x02, 0xF0, 0x1B,
- 0xAD, 0x00, 0x44, 0xD0, 0x32, 0xA6, 0x00, 0xA9,
- 0x01, 0x9D, 0x00, 0x10, 0xA9, 0x01, 0x9D, 0x00,
- 0x09, 0xE8, 0xE4, 0x01, 0xF0, 0x02, 0x86, 0x00,
- 0x4C, 0x65, 0x3A, 0xA6, 0x00, 0xAD, 0x00, 0x44,
- 0x9D, 0x00, 0x09, 0x9E, 0x00, 0x10, 0xE8, 0xE4,
- 0x01, 0xF0, 0x02, 0x86, 0x00, 0x29, 0x7F, 0xC9,
- 0x13, 0xD0, 0x04, 0xA5, 0x0B, 0x85, 0x02, 0xAD,
- 0x02, 0x44, 0x29, 0x10, 0xF0, 0x2C, 0xA6, 0x05,
- 0xF0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x01, 0xD0,
- 0x21, 0x8E, 0x00, 0x44, 0x64, 0x05, 0x4C, 0x98,
- 0x3A, 0xA6, 0x04, 0xE4, 0x03, 0xF0, 0x13, 0xA5,
- 0x02, 0xD0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x01,
- 0xD0, 0x08, 0xBD, 0x00, 0x02, 0x8D, 0x00, 0x44,
- 0xE6, 0x04, 0xAD, 0x02, 0x4C, 0x89, 0x08, 0xF0,
- 0x3B, 0x89, 0x02, 0xF0, 0x1B, 0xAD, 0x00, 0x4C,
- 0xD0, 0x32, 0xA6, 0x0C, 0xA9, 0x01, 0x9D, 0x00,
- 0x11, 0xA9, 0x01, 0x9D, 0x00, 0x0A, 0xE8, 0xE4,
- 0x0D, 0xF0, 0x02, 0x86, 0x0C, 0x4C, 0xDA, 0x3A,
- 0xA6, 0x0C, 0xAD, 0x00, 0x4C, 0x9D, 0x00, 0x0A,
- 0x9E, 0x00, 0x11, 0xE8, 0xE4, 0x0D, 0xF0, 0x02,
- 0x86, 0x0C, 0x29, 0x7F, 0xC9, 0x13, 0xD0, 0x04,
- 0xA5, 0x17, 0x85, 0x0E, 0xAD, 0x02, 0x4C, 0x29,
- 0x10, 0xF0, 0x2C, 0xA6, 0x11, 0xF0, 0x0F, 0xAD,
- 0x02, 0x7C, 0x29, 0x02, 0xD0, 0x21, 0x8E, 0x00,
- 0x4C, 0x64, 0x11, 0x4C, 0x0D, 0x3B, 0xA6, 0x10,
- 0xE4, 0x0F, 0xF0, 0x13, 0xA5, 0x0E, 0xD0, 0x0F,
- 0xAD, 0x02, 0x7C, 0x29, 0x02, 0xD0, 0x08, 0xBD,
- 0x00, 0x03, 0x8D, 0x00, 0x4C, 0xE6, 0x10, 0xAD,
- 0x02, 0x54, 0x89, 0x08, 0xF0, 0x3B, 0x89, 0x02,
- 0xF0, 0x1B, 0xAD, 0x00, 0x54, 0xD0, 0x32, 0xA6,
- 0x18, 0xA9, 0x01, 0x9D, 0x00, 0x12, 0xA9, 0x01,
- 0x9D, 0x00, 0x0B, 0xE8, 0xE4, 0x19, 0xF0, 0x02,
- 0x86, 0x18, 0x4C, 0x4F, 0x3B, 0xA6, 0x18, 0xAD,
- 0x00, 0x54, 0x9D, 0x00, 0x0B, 0x9E, 0x00, 0x12,
- 0xE8, 0xE4, 0x19, 0xF0, 0x02, 0x86, 0x18, 0x29,
- 0x7F, 0xC9, 0x13, 0xD0, 0x04, 0xA5, 0x23, 0x85,
- 0x1A, 0xAD, 0x02, 0x54, 0x29, 0x10, 0xF0, 0x2C,
- 0xA6, 0x1D, 0xF0, 0x0F, 0xAD, 0x02, 0x7C, 0x29,
- 0x04, 0xD0, 0x21, 0x8E, 0x00, 0x54, 0x64, 0x1D,
- 0x4C, 0x82, 0x3B, 0xA6, 0x1C, 0xE4, 0x1B, 0xF0,
- 0x13, 0xA5, 0x1A, 0xD0, 0x0F, 0xAD, 0x02, 0x7C,
- 0x29, 0x04, 0xD0, 0x08, 0xBD, 0x00, 0x04, 0x8D,
- 0x00, 0x54, 0xE6, 0x1C, 0xAD, 0x02, 0x5C, 0x89,
- 0x08, 0xF0, 0x3B, 0x89, 0x02, 0xF0, 0x1B, 0xAD,
- 0x00, 0x5C, 0xD0, 0x32, 0xA6, 0x24, 0xA9, 0x01,
- 0x9D, 0x00, 0x13, 0xA9, 0x01, 0x9D, 0x00, 0x0C,
- 0xE8, 0xE4, 0x25, 0xF0, 0x02, 0x86, 0x24, 0x4C,
- 0xC4, 0x3B, 0xA6, 0x24, 0xAD, 0x00, 0x5C, 0x9D,
- 0x00, 0x0C, 0x9E, 0x00, 0x13, 0xE8, 0xE4, 0x25,
- 0xF0, 0x02, 0x86, 0x24, 0x29, 0x7F, 0xC9, 0x13,
- 0xD0, 0x04, 0xA5, 0x2F, 0x85, 0x26, 0xAD, 0x02,
- 0x5C, 0x29, 0x10, 0xF0, 0x2C, 0xA6, 0x29, 0xF0,
- 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x08, 0xD0, 0x21,
- 0x8E, 0x00, 0x5C, 0x64, 0x29, 0x4C, 0xF7, 0x3B,
- 0xA6, 0x28, 0xE4, 0x27, 0xF0, 0x13, 0xA5, 0x26,
- 0xD0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x08, 0xD0,
- 0x08, 0xBD, 0x00, 0x05, 0x8D, 0x00, 0x5C, 0xE6,
- 0x28, 0xAD, 0x02, 0x64, 0x89, 0x08, 0xF0, 0x3B,
- 0x89, 0x02, 0xF0, 0x1B, 0xAD, 0x00, 0x64, 0xD0,
- 0x32, 0xA6, 0x30, 0xA9, 0x01, 0x9D, 0x00, 0x14,
- 0xA9, 0x01, 0x9D, 0x00, 0x0D, 0xE8, 0xE4, 0x31,
- 0xF0, 0x02, 0x86, 0x30, 0x4C, 0x39, 0x3C, 0xA6,
- 0x30, 0xAD, 0x00, 0x64, 0x9D, 0x00, 0x0D, 0x9E,
- 0x00, 0x14, 0xE8, 0xE4, 0x31, 0xF0, 0x02, 0x86,
- 0x30, 0x29, 0x7F, 0xC9, 0x13, 0xD0, 0x04, 0xA5,
- 0x3B, 0x85, 0x32, 0xAD, 0x02, 0x64, 0x29, 0x10,
- 0xF0, 0x2C, 0xA6, 0x35, 0xF0, 0x0F, 0xAD, 0x02,
- 0x7C, 0x29, 0x10, 0xD0, 0x21, 0x8E, 0x00, 0x64,
- 0x64, 0x35, 0x4C, 0x6C, 0x3C, 0xA6, 0x34, 0xE4,
- 0x33, 0xF0, 0x13, 0xA5, 0x32, 0xD0, 0x0F, 0xAD,
- 0x02, 0x7C, 0x29, 0x10, 0xD0, 0x08, 0xBD, 0x00,
- 0x06, 0x8D, 0x00, 0x64, 0xE6, 0x34, 0xAD, 0x02,
- 0x6C, 0x89, 0x08, 0xF0, 0x3B, 0x89, 0x02, 0xF0,
- 0x1B, 0xAD, 0x00, 0x6C, 0xD0, 0x32, 0xA6, 0x3C,
- 0xA9, 0x01, 0x9D, 0x00, 0x15, 0xA9, 0x01, 0x9D,
- 0x00, 0x0E, 0xE8, 0xE4, 0x3D, 0xF0, 0x02, 0x86,
- 0x3C, 0x4C, 0xAE, 0x3C, 0xA6, 0x3C, 0xAD, 0x00,
- 0x6C, 0x9D, 0x00, 0x0E, 0x9E, 0x00, 0x15, 0xE8,
- 0xE4, 0x3D, 0xF0, 0x02, 0x86, 0x3C, 0x29, 0x7F,
- 0xC9, 0x13, 0xD0, 0x04, 0xA5, 0x47, 0x85, 0x3E,
- 0xAD, 0x02, 0x6C, 0x29, 0x10, 0xF0, 0x2C, 0xA6,
- 0x41, 0xF0, 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x20,
- 0xD0, 0x21, 0x8E, 0x00, 0x6C, 0x64, 0x41, 0x4C,
- 0xE1, 0x3C, 0xA6, 0x40, 0xE4, 0x3F, 0xF0, 0x13,
- 0xA5, 0x3E, 0xD0, 0x0F, 0xAD, 0x02, 0x7C, 0x29,
- 0x20, 0xD0, 0x08, 0xBD, 0x00, 0x07, 0x8D, 0x00,
- 0x6C, 0xE6, 0x40, 0xAD, 0x02, 0x74, 0x89, 0x08,
- 0xF0, 0x3B, 0x89, 0x02, 0xF0, 0x1B, 0xAD, 0x00,
- 0x74, 0xD0, 0x32, 0xA6, 0x48, 0xA9, 0x01, 0x9D,
- 0x00, 0x16, 0xA9, 0x01, 0x9D, 0x00, 0x0F, 0xE8,
- 0xE4, 0x49, 0xF0, 0x02, 0x86, 0x48, 0x4C, 0x23,
- 0x3D, 0xA6, 0x48, 0xAD, 0x00, 0x74, 0x9D, 0x00,
- 0x0F, 0x9E, 0x00, 0x16, 0xE8, 0xE4, 0x49, 0xF0,
- 0x02, 0x86, 0x48, 0x29, 0x7F, 0xC9, 0x13, 0xD0,
- 0x04, 0xA5, 0x53, 0x85, 0x4A, 0xAD, 0x02, 0x74,
- 0x29, 0x10, 0xF0, 0x2C, 0xA6, 0x4D, 0xF0, 0x0F,
- 0xAD, 0x02, 0x7C, 0x29, 0x40, 0xD0, 0x21, 0x8E,
- 0x00, 0x74, 0x64, 0x4D, 0x4C, 0x56, 0x3D, 0xA6,
- 0x4C, 0xE4, 0x4B, 0xF0, 0x13, 0xA5, 0x4A, 0xD0,
- 0x0F, 0xAD, 0x02, 0x7C, 0x29, 0x40, 0xD0, 0x08,
- 0xBD, 0x00, 0x08, 0x8D, 0x00, 0x74, 0xE6, 0x4C,
- 0x60, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
- 0xFF, 0xFF, 0xFF, 0xFF, 0xD0, 0xD0, 0x00, 0x38,
- 0xCE, 0xC0,
-};
+++ /dev/null
-/* sx.c -- driver for the Specialix SX series cards.
- *
- * This driver will also support the older SI, and XIO cards.
- *
- *
- * (C) 1998 - 2004 R.E.Wolff@BitWizard.nl
- *
- * Simon Allen (simonallen@cix.compulink.co.uk) wrote a previous
- * version of this driver. Some fragments may have been copied. (none
- * yet :-)
- *
- * Specialix pays for the development and support of this driver.
- * Please DO contact support@specialix.co.uk if you require
- * support. But please read the documentation (sx.txt) first.
- *
- *
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be
- * useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE. See the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the Free
- * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
- * USA.
- *
- * Revision history:
- * Revision 1.33 2000/03/09 10:00:00 pvdl,wolff
- * - Fixed module and port counting
- * - Fixed signal handling
- * - Fixed an Ooops
- *
- * Revision 1.32 2000/03/07 09:00:00 wolff,pvdl
- * - Fixed some sx_dprintk typos
- * - added detection for an invalid board/module configuration
- *
- * Revision 1.31 2000/03/06 12:00:00 wolff,pvdl
- * - Added support for EISA
- *
- * Revision 1.30 2000/01/21 17:43:06 wolff
- * - Added support for SX+
- *
- * Revision 1.26 1999/08/05 15:22:14 wolff
- * - Port to 2.3.x
- * - Reformatted to Linus' liking.
- *
- * Revision 1.25 1999/07/30 14:24:08 wolff
- * Had accidentally left "gs_debug" set to "-1" instead of "off" (=0).
- *
- * Revision 1.24 1999/07/28 09:41:52 wolff
- * - I noticed the remark about use-count straying in sx.txt. I checked
- * sx_open, and found a few places where that could happen. I hope it's
- * fixed now.
- *
- * Revision 1.23 1999/07/28 08:56:06 wolff
- * - Fixed crash when sx_firmware run twice.
- * - Added sx_slowpoll as a module parameter (I guess nobody really wanted
- * to change it from the default... )
- * - Fixed a stupid editing problem I introduced in 1.22.
- * - Fixed dropping characters on a termios change.
- *
- * Revision 1.22 1999/07/26 21:01:43 wolff
- * Russell Brown noticed that I had overlooked 4 out of six modem control
- * signals in sx_getsignals. Ooops.
- *
- * Revision 1.21 1999/07/23 09:11:33 wolff
- * I forgot to free dynamically allocated memory when the driver is unloaded.
- *
- * Revision 1.20 1999/07/20 06:25:26 wolff
- * The "closing wait" wasn't honoured. Thanks to James Griffiths for
- * reporting this.
- *
- * Revision 1.19 1999/07/11 08:59:59 wolff
- * Fixed an oops in close, when an open was pending. Changed the memtest
- * a bit. Should also test the board in word-mode, however my card fails the
- * memtest then. I still have to figure out what is wrong...
- *
- * Revision 1.18 1999/06/10 09:38:42 wolff
- * Changed the format of the firmware revision from %04x to %x.%02x .
- *
- * Revision 1.17 1999/06/04 09:44:35 wolff
- * fixed problem: reference to pci stuff when config_pci was off...
- * Thanks to Jorge Novo for noticing this.
- *
- * Revision 1.16 1999/06/02 08:30:15 wolff
- * added/removed the workaround for the DCD bug in the Firmware.
- * A bit more debugging code to locate that...
- *
- * Revision 1.15 1999/06/01 11:35:30 wolff
- * when DCD is left low (floating?), on TA's the firmware first tells us
- * that DCD is high, but after a short while suddenly comes to the
- * conclusion that it is low. All this would be fine, if it weren't that
- * Unix requires us to send a "hangup" signal in that case. This usually
- * all happens BEFORE the program has had a chance to ioctl the device
- * into clocal mode..
- *
- * Revision 1.14 1999/05/25 11:18:59 wolff
- * Added PCI-fix.
- * Added checks for return code of sx_sendcommand.
- * Don't issue "reconfig" if port isn't open yet. (bit us on TA modules...)
- *
- * Revision 1.13 1999/04/29 15:18:01 wolff
- * Fixed an "oops" that showed on SuSE 6.0 systems.
- * Activate DTR again after stty 0.
- *
- * Revision 1.12 1999/04/29 07:49:52 wolff
- * Improved "stty 0" handling a bit. (used to change baud to 9600 assuming
- * the connection would be dropped anyway. That is not always the case,
- * and confuses people).
- * Told the card to always monitor the modem signals.
- * Added support for dynamic gs_debug adjustments.
- * Now tells the rest of the system the number of ports.
- *
- * Revision 1.11 1999/04/24 11:11:30 wolff
- * Fixed two stupid typos in the memory test.
- *
- * Revision 1.10 1999/04/24 10:53:39 wolff
- * Added some of Christian's suggestions.
- * Fixed an HW_COOK_IN bug (ISIG was not in I_OTHER. We used to trust the
- * card to send the signal to the process.....)
- *
- * Revision 1.9 1999/04/23 07:26:38 wolff
- * Included Christian Lademann's 2.0 compile-warning fixes and interrupt
- * assignment redesign.
- * Cleanup of some other stuff.
- *
- * Revision 1.8 1999/04/16 13:05:30 wolff
- * fixed a DCD change unnoticed bug.
- *
- * Revision 1.7 1999/04/14 22:19:51 wolff
- * Fixed typo that showed up in 2.0.x builds (get_user instead of Get_user!)
- *
- * Revision 1.6 1999/04/13 18:40:20 wolff
- * changed misc-minor to 161, as assigned by HPA.
- *
- * Revision 1.5 1999/04/13 15:12:25 wolff
- * Fixed use-count leak when "hangup" occurred.
- * Added workaround for a stupid-PCIBIOS bug.
- *
- *
- * Revision 1.4 1999/04/01 22:47:40 wolff
- * Fixed < 1M linux-2.0 problem.
- * (vremap isn't compatible with ioremap in that case)
- *
- * Revision 1.3 1999/03/31 13:45:45 wolff
- * Firmware loading is now done through a separate IOCTL.
- *
- * Revision 1.2 1999/03/28 12:22:29 wolff
- * rcs cleanup
- *
- * Revision 1.1 1999/03/28 12:10:34 wolff
- * Readying for release on 2.0.x (sorry David, 1.01 becomes 1.1 for RCS).
- *
- * Revision 0.12 1999/03/28 09:20:10 wolff
- * Fixed problem in 0.11, continuing cleanup.
- *
- * Revision 0.11 1999/03/28 08:46:44 wolff
- * cleanup. Not good.
- *
- * Revision 0.10 1999/03/28 08:09:43 wolff
- * Fixed losing characters on close.
- *
- * Revision 0.9 1999/03/21 22:52:01 wolff
- * Ported back to 2.2.... (minor things)
- *
- * Revision 0.8 1999/03/21 22:40:33 wolff
- * Port to 2.0
- *
- * Revision 0.7 1999/03/21 19:06:34 wolff
- * Fixed hangup processing.
- *
- * Revision 0.6 1999/02/05 08:45:14 wolff
- * fixed real_raw problems. Inclusion into kernel imminent.
- *
- * Revision 0.5 1998/12/21 23:51:06 wolff
- * Snatched a nasty bug: sx_transmit_chars was getting re-entered, and it
- * shouldn't have. THATs why I want to have transmit interrupts even when
- * the buffer is empty.
- *
- * Revision 0.4 1998/12/17 09:34:46 wolff
- * PPP works. ioctl works. Basically works!
- *
- * Revision 0.3 1998/12/15 13:05:18 wolff
- * It works! Wow! Gotta start implementing IOCTL and stuff....
- *
- * Revision 0.2 1998/12/01 08:33:53 wolff
- * moved over to 2.1.130
- *
- * Revision 0.1 1998/11/03 21:23:51 wolff
- * Initial revision. Detects SX card.
- *
- * */
-
-#define SX_VERSION 1.33
-
-#include <linux/module.h>
-#include <linux/kdev_t.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/mm.h>
-#include <linux/serial.h>
-#include <linux/fcntl.h>
-#include <linux/major.h>
-#include <linux/delay.h>
-#include <linux/eisa.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/miscdevice.h>
-#include <linux/bitops.h>
-
-#include <asm/io.h>
-#include <asm/uaccess.h>
-
-/* The 3.0.0 version of sxboards/sxwindow.h uses BYTE and WORD.... */
-#define BYTE u8
-#define WORD u16
-
-/* .... but the 3.0.4 version uses _u8 and _u16. */
-#define _u8 u8
-#define _u16 u16
-
-#include "sxboards.h"
-#include "sxwindow.h"
-
-#include <linux/generic_serial.h>
-#include "sx.h"
-
-/* I don't think that this driver can handle more than 256 ports on
- one machine. You'll have to increase the number of boards in sx.h
- if you want more than 4 boards. */
-
-#ifndef PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8
-#define PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8 0x2000
-#endif
-
-/* Configurable options:
- (Don't be too sure that it'll work if you toggle them) */
-
-/* Am I paranoid or not ? ;-) */
-#undef SX_PARANOIA_CHECK
-
-/* 20 -> 2000 per second. The card should rate-limit interrupts at 100
- Hz, but it is user configurable. I don't recommend going above 1000
- Hz. The interrupt ratelimit might trigger if the interrupt is
- shared with a very active other device. */
-#define IRQ_RATE_LIMIT 20
-
-/* Sharing interrupts is possible now. If the other device wants more
- than 2000 interrupts per second, we'd gracefully decline further
- interrupts. That's not what we want. On the other hand, if the
- other device interrupts 2000 times a second, don't use the SX
- interrupt. Use polling. */
-#undef IRQ_RATE_LIMIT
-
-#if 0
-/* Not implemented */
-/*
- * The following defines are mostly for testing purposes. But if you need
- * some nice reporting in your syslog, you can define them also.
- */
-#define SX_REPORT_FIFO
-#define SX_REPORT_OVERRUN
-#endif
-
-/* Function prototypes */
-static void sx_disable_tx_interrupts(void *ptr);
-static void sx_enable_tx_interrupts(void *ptr);
-static void sx_disable_rx_interrupts(void *ptr);
-static void sx_enable_rx_interrupts(void *ptr);
-static int sx_carrier_raised(struct tty_port *port);
-static void sx_shutdown_port(void *ptr);
-static int sx_set_real_termios(void *ptr);
-static void sx_close(void *ptr);
-static int sx_chars_in_buffer(void *ptr);
-static int sx_init_board(struct sx_board *board);
-static int sx_init_portstructs(int nboards, int nports);
-static long sx_fw_ioctl(struct file *filp, unsigned int cmd,
- unsigned long arg);
-static int sx_init_drivers(void);
-
-static struct tty_driver *sx_driver;
-
-static DEFINE_MUTEX(sx_boards_lock);
-static struct sx_board boards[SX_NBOARDS];
-static struct sx_port *sx_ports;
-static int sx_initialized;
-static int sx_nports;
-static int sx_debug;
-
-/* You can have the driver poll your card.
- - Set sx_poll to 1 to poll every timer tick (10ms on Intel).
- This is used when the card cannot use an interrupt for some reason.
-
- - set sx_slowpoll to 100 to do an extra poll once a second (on Intel). If
- the driver misses an interrupt (report this if it DOES happen to you!)
- everything will continue to work....
- */
-static int sx_poll = 1;
-static int sx_slowpoll;
-
-/* The card limits the number of interrupts per second.
- At 115k2 "100" should be sufficient.
- If you're using higher baudrates, you can increase this...
- */
-
-static int sx_maxints = 100;
-
-#ifdef CONFIG_ISA
-
-/* These are the only open spaces in my computer. Yours may have more
- or less.... -- REW
- duh: Card at 0xa0000 is possible on HP Netserver?? -- pvdl
-*/
-static int sx_probe_addrs[] = {
- 0xc0000, 0xd0000, 0xe0000,
- 0xc8000, 0xd8000, 0xe8000
-};
-static int si_probe_addrs[] = {
- 0xc0000, 0xd0000, 0xe0000,
- 0xc8000, 0xd8000, 0xe8000, 0xa0000
-};
-static int si1_probe_addrs[] = {
- 0xd0000
-};
-
-#define NR_SX_ADDRS ARRAY_SIZE(sx_probe_addrs)
-#define NR_SI_ADDRS ARRAY_SIZE(si_probe_addrs)
-#define NR_SI1_ADDRS ARRAY_SIZE(si1_probe_addrs)
-
-module_param_array(sx_probe_addrs, int, NULL, 0);
-module_param_array(si_probe_addrs, int, NULL, 0);
-#endif
-
-/* Set the mask to all-ones. This alas, only supports 32 interrupts.
- Some architectures may need more. */
-static int sx_irqmask = -1;
-
-module_param(sx_poll, int, 0);
-module_param(sx_slowpoll, int, 0);
-module_param(sx_maxints, int, 0);
-module_param(sx_debug, int, 0);
-module_param(sx_irqmask, int, 0);
-
-MODULE_LICENSE("GPL");
-
-static struct real_driver sx_real_driver = {
- sx_disable_tx_interrupts,
- sx_enable_tx_interrupts,
- sx_disable_rx_interrupts,
- sx_enable_rx_interrupts,
- sx_shutdown_port,
- sx_set_real_termios,
- sx_chars_in_buffer,
- sx_close,
-};
-
-/*
- This driver can spew a whole lot of debugging output at you. If you
- need maximum performance, you should disable the DEBUG define. To
- aid in debugging in the field, I'm leaving the compile-time debug
- features enabled, and disable them "runtime". That allows me to
- instruct people with problems to enable debugging without requiring
- them to recompile...
-*/
-#define DEBUG
-
-#ifdef DEBUG
-#define sx_dprintk(f, str...) if (sx_debug & f) printk (str)
-#else
-#define sx_dprintk(f, str...) /* nothing */
-#endif
-
-#define func_enter() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s\n",__func__)
-#define func_exit() sx_dprintk(SX_DEBUG_FLOW, "sx: exit %s\n",__func__)
-
-#define func_enter2() sx_dprintk(SX_DEBUG_FLOW, "sx: enter %s (port %d)\n", \
- __func__, port->line)
-
-/*
- * Firmware loader driver specific routines
- *
- */
-
-static const struct file_operations sx_fw_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = sx_fw_ioctl,
- .llseek = noop_llseek,
-};
-
-static struct miscdevice sx_fw_device = {
- SXCTL_MISC_MINOR, "sxctl", &sx_fw_fops
-};
-
-#ifdef SX_PARANOIA_CHECK
-
-/* This doesn't work. Who's paranoid around here? Not me! */
-
-static inline int sx_paranoia_check(struct sx_port const *port,
- char *name, const char *routine)
-{
- static const char *badmagic = KERN_ERR "sx: Warning: bad sx port magic "
- "number for device %s in %s\n";
- static const char *badinfo = KERN_ERR "sx: Warning: null sx port for "
- "device %s in %s\n";
-
- if (!port) {
- printk(badinfo, name, routine);
- return 1;
- }
- if (port->magic != SX_MAGIC) {
- printk(badmagic, name, routine);
- return 1;
- }
-
- return 0;
-}
-#else
-#define sx_paranoia_check(a,b,c) 0
-#endif
-
-/* The timeouts. First try 30 times as fast as possible. Then give
- the card some time to breathe between accesses. (Otherwise the
- processor on the card might not be able to access its OWN bus... */
-
-#define TIMEOUT_1 30
-#define TIMEOUT_2 1000000
-
-#ifdef DEBUG
-static void my_hd_io(void __iomem *p, int len)
-{
- int i, j, ch;
- unsigned char __iomem *addr = p;
-
- for (i = 0; i < len; i += 16) {
- printk("%p ", addr + i);
- for (j = 0; j < 16; j++) {
- printk("%02x %s", readb(addr + j + i),
- (j == 7) ? " " : "");
- }
- for (j = 0; j < 16; j++) {
- ch = readb(addr + j + i);
- printk("%c", (ch < 0x20) ? '.' :
- ((ch > 0x7f) ? '.' : ch));
- }
- printk("\n");
- }
-}
-static void my_hd(void *p, int len)
-{
- int i, j, ch;
- unsigned char *addr = p;
-
- for (i = 0; i < len; i += 16) {
- printk("%p ", addr + i);
- for (j = 0; j < 16; j++) {
- printk("%02x %s", addr[j + i], (j == 7) ? " " : "");
- }
- for (j = 0; j < 16; j++) {
- ch = addr[j + i];
- printk("%c", (ch < 0x20) ? '.' :
- ((ch > 0x7f) ? '.' : ch));
- }
- printk("\n");
- }
-}
-#endif
-
-/* This needs redoing for Alpha -- REW -- Done. */
-
-static inline void write_sx_byte(struct sx_board *board, int offset, u8 byte)
-{
- writeb(byte, board->base + offset);
-}
-
-static inline u8 read_sx_byte(struct sx_board *board, int offset)
-{
- return readb(board->base + offset);
-}
-
-static inline void write_sx_word(struct sx_board *board, int offset, u16 word)
-{
- writew(word, board->base + offset);
-}
-
-static inline u16 read_sx_word(struct sx_board *board, int offset)
-{
- return readw(board->base + offset);
-}
-
-static int sx_busy_wait_eq(struct sx_board *board,
- int offset, int mask, int correctval)
-{
- int i;
-
- func_enter();
-
- for (i = 0; i < TIMEOUT_1; i++)
- if ((read_sx_byte(board, offset) & mask) == correctval) {
- func_exit();
- return 1;
- }
-
- for (i = 0; i < TIMEOUT_2; i++) {
- if ((read_sx_byte(board, offset) & mask) == correctval) {
- func_exit();
- return 1;
- }
- udelay(1);
- }
-
- func_exit();
- return 0;
-}
-
-static int sx_busy_wait_neq(struct sx_board *board,
- int offset, int mask, int badval)
-{
- int i;
-
- func_enter();
-
- for (i = 0; i < TIMEOUT_1; i++)
- if ((read_sx_byte(board, offset) & mask) != badval) {
- func_exit();
- return 1;
- }
-
- for (i = 0; i < TIMEOUT_2; i++) {
- if ((read_sx_byte(board, offset) & mask) != badval) {
- func_exit();
- return 1;
- }
- udelay(1);
- }
-
- func_exit();
- return 0;
-}
-
-/* 5.6.4 of 6210028 r2.3 */
-static int sx_reset(struct sx_board *board)
-{
- func_enter();
-
- if (IS_SX_BOARD(board)) {
-
- write_sx_byte(board, SX_CONFIG, 0);
- write_sx_byte(board, SX_RESET, 1); /* Value doesn't matter */
-
- if (!sx_busy_wait_eq(board, SX_RESET_STATUS, 1, 0)) {
- printk(KERN_INFO "sx: Card doesn't respond to "
- "reset...\n");
- return 0;
- }
- } else if (IS_EISA_BOARD(board)) {
- outb(board->irq << 4, board->eisa_base + 0xc02);
- } else if (IS_SI1_BOARD(board)) {
- write_sx_byte(board, SI1_ISA_RESET, 0); /*value doesn't matter*/
- } else {
- /* Gory details of the SI/ISA board */
- write_sx_byte(board, SI2_ISA_RESET, SI2_ISA_RESET_SET);
- write_sx_byte(board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_CLEAR);
- write_sx_byte(board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_CLEAR);
- write_sx_byte(board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_CLEAR);
- write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_CLEAR);
- write_sx_byte(board, SI2_ISA_IRQSET, SI2_ISA_IRQSET_CLEAR);
- }
-
- func_exit();
- return 1;
-}
-
-/* This doesn't work on machines where "NULL" isn't 0 */
-/* If you have one of those, someone will need to write
- the equivalent of this, which will amount to about 3 lines. I don't
- want to complicate this right now. -- REW
- (See, I do write comments every now and then :-) */
-#define OFFSETOF(strct, elem) ((long)&(((struct strct *)NULL)->elem))
-
-#define CHAN_OFFSET(port,elem) (port->ch_base + OFFSETOF (_SXCHANNEL, elem))
-#define MODU_OFFSET(board,addr,elem) (addr + OFFSETOF (_SXMODULE, elem))
-#define BRD_OFFSET(board,elem) (OFFSETOF (_SXCARD, elem))
-
-#define sx_write_channel_byte(port, elem, val) \
- write_sx_byte (port->board, CHAN_OFFSET (port, elem), val)
-
-#define sx_read_channel_byte(port, elem) \
- read_sx_byte (port->board, CHAN_OFFSET (port, elem))
-
-#define sx_write_channel_word(port, elem, val) \
- write_sx_word (port->board, CHAN_OFFSET (port, elem), val)
-
-#define sx_read_channel_word(port, elem) \
- read_sx_word (port->board, CHAN_OFFSET (port, elem))
-
-#define sx_write_module_byte(board, addr, elem, val) \
- write_sx_byte (board, MODU_OFFSET (board, addr, elem), val)
-
-#define sx_read_module_byte(board, addr, elem) \
- read_sx_byte (board, MODU_OFFSET (board, addr, elem))
-
-#define sx_write_module_word(board, addr, elem, val) \
- write_sx_word (board, MODU_OFFSET (board, addr, elem), val)
-
-#define sx_read_module_word(board, addr, elem) \
- read_sx_word (board, MODU_OFFSET (board, addr, elem))
-
-#define sx_write_board_byte(board, elem, val) \
- write_sx_byte (board, BRD_OFFSET (board, elem), val)
-
-#define sx_read_board_byte(board, elem) \
- read_sx_byte (board, BRD_OFFSET (board, elem))
-
-#define sx_write_board_word(board, elem, val) \
- write_sx_word (board, BRD_OFFSET (board, elem), val)
-
-#define sx_read_board_word(board, elem) \
- read_sx_word (board, BRD_OFFSET (board, elem))
-
-static int sx_start_board(struct sx_board *board)
-{
- if (IS_SX_BOARD(board)) {
- write_sx_byte(board, SX_CONFIG, SX_CONF_BUSEN);
- } else if (IS_EISA_BOARD(board)) {
- write_sx_byte(board, SI2_EISA_OFF, SI2_EISA_VAL);
- outb((board->irq << 4) | 4, board->eisa_base + 0xc02);
- } else if (IS_SI1_BOARD(board)) {
- write_sx_byte(board, SI1_ISA_RESET_CLEAR, 0);
- write_sx_byte(board, SI1_ISA_INTCL, 0);
- } else {
- /* Don't bug me about the clear_set.
- I haven't the foggiest idea what it's about -- REW */
- write_sx_byte(board, SI2_ISA_RESET, SI2_ISA_RESET_CLEAR);
- write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET);
- }
- return 1;
-}
-
-#define SX_IRQ_REG_VAL(board) \
- ((board->flags & SX_ISA_BOARD) ? (board->irq << 4) : 0)
-
-/* Note. The SX register is write-only. Therefore, we have to enable the
- bus too. This is a no-op, if you don't mess with this driver... */
-static int sx_start_interrupts(struct sx_board *board)
-{
-
- /* Don't call this with board->irq == 0 */
-
- if (IS_SX_BOARD(board)) {
- write_sx_byte(board, SX_CONFIG, SX_IRQ_REG_VAL(board) |
- SX_CONF_BUSEN | SX_CONF_HOSTIRQ);
- } else if (IS_EISA_BOARD(board)) {
- inb(board->eisa_base + 0xc03);
- } else if (IS_SI1_BOARD(board)) {
- write_sx_byte(board, SI1_ISA_INTCL, 0);
- write_sx_byte(board, SI1_ISA_INTCL_CLEAR, 0);
- } else {
- switch (board->irq) {
- case 11:
- write_sx_byte(board, SI2_ISA_IRQ11, SI2_ISA_IRQ11_SET);
- break;
- case 12:
- write_sx_byte(board, SI2_ISA_IRQ12, SI2_ISA_IRQ12_SET);
- break;
- case 15:
- write_sx_byte(board, SI2_ISA_IRQ15, SI2_ISA_IRQ15_SET);
- break;
- default:
- printk(KERN_INFO "sx: SI/XIO card doesn't support "
- "interrupt %d.\n", board->irq);
- return 0;
- }
- write_sx_byte(board, SI2_ISA_INTCLEAR, SI2_ISA_INTCLEAR_SET);
- }
-
- return 1;
-}
-
-static int sx_send_command(struct sx_port *port,
- int command, int mask, int newstat)
-{
- func_enter2();
- write_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat), command);
- func_exit();
- return sx_busy_wait_eq(port->board, CHAN_OFFSET(port, hi_hstat), mask,
- newstat);
-}
-
-static char *mod_type_s(int module_type)
-{
- switch (module_type) {
- case TA4:
- return "TA4";
- case TA8:
- return "TA8";
- case TA4_ASIC:
- return "TA4_ASIC";
- case TA8_ASIC:
- return "TA8_ASIC";
- case MTA_CD1400:
- return "MTA_CD1400";
- case SXDC:
- return "SXDC";
- default:
- return "Unknown/invalid";
- }
-}
-
-static char *pan_type_s(int pan_type)
-{
- switch (pan_type) {
- case MOD_RS232DB25:
- return "MOD_RS232DB25";
- case MOD_RS232RJ45:
- return "MOD_RS232RJ45";
- case MOD_RS422DB25:
- return "MOD_RS422DB25";
- case MOD_PARALLEL:
- return "MOD_PARALLEL";
- case MOD_2_RS232DB25:
- return "MOD_2_RS232DB25";
- case MOD_2_RS232RJ45:
- return "MOD_2_RS232RJ45";
- case MOD_2_RS422DB25:
- return "MOD_2_RS422DB25";
- case MOD_RS232DB25MALE:
- return "MOD_RS232DB25MALE";
- case MOD_2_PARALLEL:
- return "MOD_2_PARALLEL";
- case MOD_BLANK:
- return "empty";
- default:
- return "invalid";
- }
-}
-
-static int mod_compat_type(int module_type)
-{
- return module_type >> 4;
-}
-
-static void sx_reconfigure_port(struct sx_port *port)
-{
- if (sx_read_channel_byte(port, hi_hstat) == HS_IDLE_OPEN) {
- if (sx_send_command(port, HS_CONFIG, -1, HS_IDLE_OPEN) != 1) {
- printk(KERN_WARNING "sx: Sent reconfigure command, but "
- "card didn't react.\n");
- }
- } else {
- sx_dprintk(SX_DEBUG_TERMIOS, "sx: Not sending reconfigure: "
- "port isn't open (%02x).\n",
- sx_read_channel_byte(port, hi_hstat));
- }
-}
-
-static void sx_setsignals(struct sx_port *port, int dtr, int rts)
-{
- int t;
- func_enter2();
-
- t = sx_read_channel_byte(port, hi_op);
- if (dtr >= 0)
- t = dtr ? (t | OP_DTR) : (t & ~OP_DTR);
- if (rts >= 0)
- t = rts ? (t | OP_RTS) : (t & ~OP_RTS);
- sx_write_channel_byte(port, hi_op, t);
- sx_dprintk(SX_DEBUG_MODEMSIGNALS, "setsignals: %d/%d\n", dtr, rts);
-
- func_exit();
-}
-
-static int sx_getsignals(struct sx_port *port)
-{
- int i_stat, o_stat;
-
- o_stat = sx_read_channel_byte(port, hi_op);
- i_stat = sx_read_channel_byte(port, hi_ip);
-
- sx_dprintk(SX_DEBUG_MODEMSIGNALS, "getsignals: %d/%d (%d/%d) "
- "%02x/%02x\n",
- (o_stat & OP_DTR) != 0, (o_stat & OP_RTS) != 0,
- port->c_dcd, tty_port_carrier_raised(&port->gs.port),
- sx_read_channel_byte(port, hi_ip),
- sx_read_channel_byte(port, hi_state));
-
- return (((o_stat & OP_DTR) ? TIOCM_DTR : 0) |
- ((o_stat & OP_RTS) ? TIOCM_RTS : 0) |
- ((i_stat & IP_CTS) ? TIOCM_CTS : 0) |
- ((i_stat & IP_DCD) ? TIOCM_CAR : 0) |
- ((i_stat & IP_DSR) ? TIOCM_DSR : 0) |
- ((i_stat & IP_RI) ? TIOCM_RNG : 0));
-}
-
-static void sx_set_baud(struct sx_port *port)
-{
- int t;
-
- if (port->board->ta_type == MOD_SXDC) {
- switch (port->gs.baud) {
- /* Save some typing work... */
-#define e(x) case x: t = BAUD_ ## x; break
- e(50);
- e(75);
- e(110);
- e(150);
- e(200);
- e(300);
- e(600);
- e(1200);
- e(1800);
- e(2000);
- e(2400);
- e(4800);
- e(7200);
- e(9600);
- e(14400);
- e(19200);
- e(28800);
- e(38400);
- e(56000);
- e(57600);
- e(64000);
- e(76800);
- e(115200);
- e(128000);
- e(150000);
- e(230400);
- e(256000);
- e(460800);
- e(921600);
- case 134:
- t = BAUD_134_5;
- break;
- case 0:
- t = -1;
- break;
- default:
- /* Can I return "invalid"? */
- t = BAUD_9600;
- printk(KERN_INFO "sx: unsupported baud rate: %d.\n",
- port->gs.baud);
- break;
- }
-#undef e
- if (t > 0) {
-/* The baud rate is not set to 0, so we're enabeling DTR... -- REW */
- sx_setsignals(port, 1, -1);
- /* XXX This is not TA & MTA compatible */
- sx_write_channel_byte(port, hi_csr, 0xff);
-
- sx_write_channel_byte(port, hi_txbaud, t);
- sx_write_channel_byte(port, hi_rxbaud, t);
- } else {
- sx_setsignals(port, 0, -1);
- }
- } else {
- switch (port->gs.baud) {
-#define e(x) case x: t = CSR_ ## x; break
- e(75);
- e(150);
- e(300);
- e(600);
- e(1200);
- e(2400);
- e(4800);
- e(1800);
- e(9600);
- e(19200);
- e(57600);
- e(38400);
-/* TA supports 110, but not 115200, MTA supports 115200, but not 110 */
- case 110:
- if (port->board->ta_type == MOD_TA) {
- t = CSR_110;
- break;
- } else {
- t = CSR_9600;
- printk(KERN_INFO "sx: Unsupported baud rate: "
- "%d.\n", port->gs.baud);
- break;
- }
- case 115200:
- if (port->board->ta_type == MOD_TA) {
- t = CSR_9600;
- printk(KERN_INFO "sx: Unsupported baud rate: "
- "%d.\n", port->gs.baud);
- break;
- } else {
- t = CSR_110;
- break;
- }
- case 0:
- t = -1;
- break;
- default:
- t = CSR_9600;
- printk(KERN_INFO "sx: Unsupported baud rate: %d.\n",
- port->gs.baud);
- break;
- }
-#undef e
- if (t >= 0) {
- sx_setsignals(port, 1, -1);
- sx_write_channel_byte(port, hi_csr, t * 0x11);
- } else {
- sx_setsignals(port, 0, -1);
- }
- }
-}
-
-/* Simon Allen's version of this routine was 225 lines long. 85 is a lot
- better. -- REW */
-
-static int sx_set_real_termios(void *ptr)
-{
- struct sx_port *port = ptr;
-
- func_enter2();
-
- if (!port->gs.port.tty)
- return 0;
-
- /* What is this doing here? -- REW
- Ha! figured it out. It is to allow you to get DTR active again
- if you've dropped it with stty 0. Moved to set_baud, where it
- belongs (next to the drop dtr if baud == 0) -- REW */
- /* sx_setsignals (port, 1, -1); */
-
- sx_set_baud(port);
-
-#define CFLAG port->gs.port.tty->termios->c_cflag
- sx_write_channel_byte(port, hi_mr1,
- (C_PARENB(port->gs.port.tty) ? MR1_WITH : MR1_NONE) |
- (C_PARODD(port->gs.port.tty) ? MR1_ODD : MR1_EVEN) |
- (C_CRTSCTS(port->gs.port.tty) ? MR1_RTS_RXFLOW : 0) |
- (((CFLAG & CSIZE) == CS8) ? MR1_8_BITS : 0) |
- (((CFLAG & CSIZE) == CS7) ? MR1_7_BITS : 0) |
- (((CFLAG & CSIZE) == CS6) ? MR1_6_BITS : 0) |
- (((CFLAG & CSIZE) == CS5) ? MR1_5_BITS : 0));
-
- sx_write_channel_byte(port, hi_mr2,
- (C_CRTSCTS(port->gs.port.tty) ? MR2_CTS_TXFLOW : 0) |
- (C_CSTOPB(port->gs.port.tty) ? MR2_2_STOP :
- MR2_1_STOP));
-
- switch (CFLAG & CSIZE) {
- case CS8:
- sx_write_channel_byte(port, hi_mask, 0xff);
- break;
- case CS7:
- sx_write_channel_byte(port, hi_mask, 0x7f);
- break;
- case CS6:
- sx_write_channel_byte(port, hi_mask, 0x3f);
- break;
- case CS5:
- sx_write_channel_byte(port, hi_mask, 0x1f);
- break;
- default:
- printk(KERN_INFO "sx: Invalid wordsize: %u\n",
- (unsigned int)CFLAG & CSIZE);
- break;
- }
-
- sx_write_channel_byte(port, hi_prtcl,
- (I_IXON(port->gs.port.tty) ? SP_TXEN : 0) |
- (I_IXOFF(port->gs.port.tty) ? SP_RXEN : 0) |
- (I_IXANY(port->gs.port.tty) ? SP_TANY : 0) | SP_DCEN);
-
- sx_write_channel_byte(port, hi_break,
- (I_IGNBRK(port->gs.port.tty) ? BR_IGN : 0 |
- I_BRKINT(port->gs.port.tty) ? BR_INT : 0));
-
- sx_write_channel_byte(port, hi_txon, START_CHAR(port->gs.port.tty));
- sx_write_channel_byte(port, hi_rxon, START_CHAR(port->gs.port.tty));
- sx_write_channel_byte(port, hi_txoff, STOP_CHAR(port->gs.port.tty));
- sx_write_channel_byte(port, hi_rxoff, STOP_CHAR(port->gs.port.tty));
-
- sx_reconfigure_port(port);
-
- /* Tell line discipline whether we will do input cooking */
- if (I_OTHER(port->gs.port.tty)) {
- clear_bit(TTY_HW_COOK_IN, &port->gs.port.tty->flags);
- } else {
- set_bit(TTY_HW_COOK_IN, &port->gs.port.tty->flags);
- }
- sx_dprintk(SX_DEBUG_TERMIOS, "iflags: %x(%d) ",
- (unsigned int)port->gs.port.tty->termios->c_iflag,
- I_OTHER(port->gs.port.tty));
-
-/* Tell line discipline whether we will do output cooking.
- * If OPOST is set and no other output flags are set then we can do output
- * processing. Even if only *one* other flag in the O_OTHER group is set
- * we do cooking in software.
- */
- if (O_OPOST(port->gs.port.tty) && !O_OTHER(port->gs.port.tty)) {
- set_bit(TTY_HW_COOK_OUT, &port->gs.port.tty->flags);
- } else {
- clear_bit(TTY_HW_COOK_OUT, &port->gs.port.tty->flags);
- }
- sx_dprintk(SX_DEBUG_TERMIOS, "oflags: %x(%d)\n",
- (unsigned int)port->gs.port.tty->termios->c_oflag,
- O_OTHER(port->gs.port.tty));
- /* port->c_dcd = sx_get_CD (port); */
- func_exit();
- return 0;
-}
-
-/* ********************************************************************** *
- * the interrupt related routines *
- * ********************************************************************** */
-
-/* Note:
- Other drivers use the macro "MIN" to calculate how much to copy.
- This has the disadvantage that it will evaluate parts twice. That's
- expensive when it's IO (and the compiler cannot optimize those away!).
- Moreover, I'm not sure that you're race-free.
-
- I assign a value, and then only allow the value to decrease. This
- is always safe. This makes the code a few lines longer, and you
- know I'm dead against that, but I think it is required in this
- case. */
-
-static void sx_transmit_chars(struct sx_port *port)
-{
- int c;
- int tx_ip;
- int txroom;
-
- func_enter2();
- sx_dprintk(SX_DEBUG_TRANSMIT, "Port %p: transmit %d chars\n",
- port, port->gs.xmit_cnt);
-
- if (test_and_set_bit(SX_PORT_TRANSMIT_LOCK, &port->locks)) {
- return;
- }
-
- while (1) {
- c = port->gs.xmit_cnt;
-
- sx_dprintk(SX_DEBUG_TRANSMIT, "Copying %d ", c);
- tx_ip = sx_read_channel_byte(port, hi_txipos);
-
- /* Took me 5 minutes to deduce this formula.
- Luckily it is literally in the manual in section 6.5.4.3.5 */
- txroom = (sx_read_channel_byte(port, hi_txopos) - tx_ip - 1) &
- 0xff;
-
- /* Don't copy more bytes than there is room for in the buffer */
- if (c > txroom)
- c = txroom;
- sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%d) ", c, txroom);
-
- /* Don't copy past the end of the hardware transmit buffer */
- if (c > 0x100 - tx_ip)
- c = 0x100 - tx_ip;
-
- sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%d) ", c, 0x100 - tx_ip);
-
- /* Don't copy pas the end of the source buffer */
- if (c > SERIAL_XMIT_SIZE - port->gs.xmit_tail)
- c = SERIAL_XMIT_SIZE - port->gs.xmit_tail;
-
- sx_dprintk(SX_DEBUG_TRANSMIT, " %d(%ld) \n",
- c, SERIAL_XMIT_SIZE - port->gs.xmit_tail);
-
- /* If for one reason or another, we can't copy more data, we're
- done! */
- if (c == 0)
- break;
-
- memcpy_toio(port->board->base + CHAN_OFFSET(port, hi_txbuf) +
- tx_ip, port->gs.xmit_buf + port->gs.xmit_tail, c);
-
- /* Update the pointer in the card */
- sx_write_channel_byte(port, hi_txipos, (tx_ip + c) & 0xff);
-
- /* Update the kernel buffer end */
- port->gs.xmit_tail = (port->gs.xmit_tail + c) &
- (SERIAL_XMIT_SIZE - 1);
-
- /* This one last. (this is essential)
- It would allow others to start putting more data into the
- buffer! */
- port->gs.xmit_cnt -= c;
- }
-
- if (port->gs.xmit_cnt == 0) {
- sx_disable_tx_interrupts(port);
- }
-
- if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.port.tty) {
- tty_wakeup(port->gs.port.tty);
- sx_dprintk(SX_DEBUG_TRANSMIT, "Waking up.... ldisc (%d)....\n",
- port->gs.wakeup_chars);
- }
-
- clear_bit(SX_PORT_TRANSMIT_LOCK, &port->locks);
- func_exit();
-}
-
-/* Note the symmetry between receiving chars and transmitting them!
- Note: The kernel should have implemented both a receive buffer and
- a transmit buffer. */
-
-/* Inlined: Called only once. Remove the inline when you add another call */
-static inline void sx_receive_chars(struct sx_port *port)
-{
- int c;
- int rx_op;
- struct tty_struct *tty;
- int copied = 0;
- unsigned char *rp;
-
- func_enter2();
- tty = port->gs.port.tty;
- while (1) {
- rx_op = sx_read_channel_byte(port, hi_rxopos);
- c = (sx_read_channel_byte(port, hi_rxipos) - rx_op) & 0xff;
-
- sx_dprintk(SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c);
-
- /* Don't copy past the end of the hardware receive buffer */
- if (rx_op + c > 0x100)
- c = 0x100 - rx_op;
-
- sx_dprintk(SX_DEBUG_RECEIVE, "c = %d.\n", c);
-
- /* Don't copy more bytes than there is room for in the buffer */
-
- c = tty_prepare_flip_string(tty, &rp, c);
-
- sx_dprintk(SX_DEBUG_RECEIVE, "c = %d.\n", c);
-
- /* If for one reason or another, we can't copy more data, we're done! */
- if (c == 0)
- break;
-
- sx_dprintk(SX_DEBUG_RECEIVE, "Copying over %d chars. First is "
- "%d at %lx\n", c, read_sx_byte(port->board,
- CHAN_OFFSET(port, hi_rxbuf) + rx_op),
- CHAN_OFFSET(port, hi_rxbuf));
- memcpy_fromio(rp, port->board->base +
- CHAN_OFFSET(port, hi_rxbuf) + rx_op, c);
-
- /* This one last. ( Not essential.)
- It allows the card to start putting more data into the
- buffer!
- Update the pointer in the card */
- sx_write_channel_byte(port, hi_rxopos, (rx_op + c) & 0xff);
-
- copied += c;
- }
- if (copied) {
- struct timeval tv;
-
- do_gettimeofday(&tv);
- sx_dprintk(SX_DEBUG_RECEIVE, "pushing flipq port %d (%3d "
- "chars): %d.%06d (%d/%d)\n", port->line,
- copied, (int)(tv.tv_sec % 60), (int)tv.tv_usec,
- tty->raw, tty->real_raw);
-
- /* Tell the rest of the system the news. Great news. New
- characters! */
- tty_flip_buffer_push(tty);
- /* tty_schedule_flip (tty); */
- }
-
- func_exit();
-}
-
-/* Inlined: it is called only once. Remove the inline if you add another
- call */
-static inline void sx_check_modem_signals(struct sx_port *port)
-{
- int hi_state;
- int c_dcd;
-
- hi_state = sx_read_channel_byte(port, hi_state);
- sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Checking modem signals (%d/%d)\n",
- port->c_dcd, tty_port_carrier_raised(&port->gs.port));
-
- if (hi_state & ST_BREAK) {
- hi_state &= ~ST_BREAK;
- sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a break.\n");
- sx_write_channel_byte(port, hi_state, hi_state);
- gs_got_break(&port->gs);
- }
- if (hi_state & ST_DCD) {
- hi_state &= ~ST_DCD;
- sx_dprintk(SX_DEBUG_MODEMSIGNALS, "got a DCD change.\n");
- sx_write_channel_byte(port, hi_state, hi_state);
- c_dcd = tty_port_carrier_raised(&port->gs.port);
- sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD is now %d\n", c_dcd);
- if (c_dcd != port->c_dcd) {
- port->c_dcd = c_dcd;
- if (tty_port_carrier_raised(&port->gs.port)) {
- /* DCD went UP */
- if ((sx_read_channel_byte(port, hi_hstat) !=
- HS_IDLE_CLOSED) &&
- !(port->gs.port.tty->termios->
- c_cflag & CLOCAL)) {
- /* Are we blocking in open? */
- sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
- "active, unblocking open\n");
- wake_up_interruptible(&port->gs.port.
- open_wait);
- } else {
- sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
- "raised. Ignoring.\n");
- }
- } else {
- /* DCD went down! */
- if (!(port->gs.port.tty->termios->c_cflag & CLOCAL)){
- sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
- "dropped. hanging up....\n");
- tty_hangup(port->gs.port.tty);
- } else {
- sx_dprintk(SX_DEBUG_MODEMSIGNALS, "DCD "
- "dropped. ignoring.\n");
- }
- }
- } else {
- sx_dprintk(SX_DEBUG_MODEMSIGNALS, "Hmmm. card told us "
- "DCD changed, but it didn't.\n");
- }
- }
-}
-
-/* This is what an interrupt routine should look like.
- * Small, elegant, clear.
- */
-
-static irqreturn_t sx_interrupt(int irq, void *ptr)
-{
- struct sx_board *board = ptr;
- struct sx_port *port;
- int i;
-
- func_enter();
- sx_dprintk(SX_DEBUG_FLOW, "sx: enter sx_interrupt (%d/%d)\n", irq,
- board->irq);
-
- /* AAargh! The order in which to do these things is essential and
- not trivial.
-
- - Rate limit goes before "recursive". Otherwise a series of
- recursive calls will hang the machine in the interrupt routine.
-
- - hardware twiddling goes before "recursive". Otherwise when we
- poll the card, and a recursive interrupt happens, we won't
- ack the card, so it might keep on interrupting us. (especially
- level sensitive interrupt systems like PCI).
-
- - Rate limit goes before hardware twiddling. Otherwise we won't
- catch a card that has gone bonkers.
-
- - The "initialized" test goes after the hardware twiddling. Otherwise
- the card will stick us in the interrupt routine again.
-
- - The initialized test goes before recursive.
- */
-
-#ifdef IRQ_RATE_LIMIT
- /* Aaargh! I'm ashamed. This costs more lines-of-code than the
- actual interrupt routine!. (Well, used to when I wrote that
- comment) */
- {
- static int lastjif;
- static int nintr = 0;
-
- if (lastjif == jiffies) {
- if (++nintr > IRQ_RATE_LIMIT) {
- free_irq(board->irq, board);
- printk(KERN_ERR "sx: Too many interrupts. "
- "Turning off interrupt %d.\n",
- board->irq);
- }
- } else {
- lastjif = jiffies;
- nintr = 0;
- }
- }
-#endif
-
- if (board->irq == irq) {
- /* Tell the card we've noticed the interrupt. */
-
- sx_write_board_word(board, cc_int_pending, 0);
- if (IS_SX_BOARD(board)) {
- write_sx_byte(board, SX_RESET_IRQ, 1);
- } else if (IS_EISA_BOARD(board)) {
- inb(board->eisa_base + 0xc03);
- write_sx_word(board, 8, 0);
- } else {
- write_sx_byte(board, SI2_ISA_INTCLEAR,
- SI2_ISA_INTCLEAR_CLEAR);
- write_sx_byte(board, SI2_ISA_INTCLEAR,
- SI2_ISA_INTCLEAR_SET);
- }
- }
-
- if (!sx_initialized)
- return IRQ_HANDLED;
- if (!(board->flags & SX_BOARD_INITIALIZED))
- return IRQ_HANDLED;
-
- if (test_and_set_bit(SX_BOARD_INTR_LOCK, &board->locks)) {
- printk(KERN_ERR "Recursive interrupt! (%d)\n", board->irq);
- return IRQ_HANDLED;
- }
-
- for (i = 0; i < board->nports; i++) {
- port = &board->ports[i];
- if (port->gs.port.flags & GS_ACTIVE) {
- if (sx_read_channel_byte(port, hi_state)) {
- sx_dprintk(SX_DEBUG_INTERRUPTS, "Port %d: "
- "modem signal change?... \n",i);
- sx_check_modem_signals(port);
- }
- if (port->gs.xmit_cnt) {
- sx_transmit_chars(port);
- }
- if (!(port->gs.port.flags & SX_RX_THROTTLE)) {
- sx_receive_chars(port);
- }
- }
- }
-
- clear_bit(SX_BOARD_INTR_LOCK, &board->locks);
-
- sx_dprintk(SX_DEBUG_FLOW, "sx: exit sx_interrupt (%d/%d)\n", irq,
- board->irq);
- func_exit();
- return IRQ_HANDLED;
-}
-
-static void sx_pollfunc(unsigned long data)
-{
- struct sx_board *board = (struct sx_board *)data;
-
- func_enter();
-
- sx_interrupt(0, board);
-
- mod_timer(&board->timer, jiffies + sx_poll);
- func_exit();
-}
-
-/* ********************************************************************** *
- * Here are the routines that actually *
- * interface with the generic_serial driver *
- * ********************************************************************** */
-
-/* Ehhm. I don't know how to fiddle with interrupts on the SX card. --REW */
-/* Hmm. Ok I figured it out. You don't. */
-
-static void sx_disable_tx_interrupts(void *ptr)
-{
- struct sx_port *port = ptr;
- func_enter2();
-
- port->gs.port.flags &= ~GS_TX_INTEN;
-
- func_exit();
-}
-
-static void sx_enable_tx_interrupts(void *ptr)
-{
- struct sx_port *port = ptr;
- int data_in_buffer;
- func_enter2();
-
- /* First transmit the characters that we're supposed to */
- sx_transmit_chars(port);
-
- /* The sx card will never interrupt us if we don't fill the buffer
- past 25%. So we keep considering interrupts off if that's the case. */
- data_in_buffer = (sx_read_channel_byte(port, hi_txipos) -
- sx_read_channel_byte(port, hi_txopos)) & 0xff;
-
- /* XXX Must be "HIGH_WATER" for SI card according to doc. */
- if (data_in_buffer < LOW_WATER)
- port->gs.port.flags &= ~GS_TX_INTEN;
-
- func_exit();
-}
-
-static void sx_disable_rx_interrupts(void *ptr)
-{
- /* struct sx_port *port = ptr; */
- func_enter();
-
- func_exit();
-}
-
-static void sx_enable_rx_interrupts(void *ptr)
-{
- /* struct sx_port *port = ptr; */
- func_enter();
-
- func_exit();
-}
-
-/* Jeez. Isn't this simple? */
-static int sx_carrier_raised(struct tty_port *port)
-{
- struct sx_port *sp = container_of(port, struct sx_port, gs.port);
- return ((sx_read_channel_byte(sp, hi_ip) & IP_DCD) != 0);
-}
-
-/* Jeez. Isn't this simple? */
-static int sx_chars_in_buffer(void *ptr)
-{
- struct sx_port *port = ptr;
- func_enter2();
-
- func_exit();
- return ((sx_read_channel_byte(port, hi_txipos) -
- sx_read_channel_byte(port, hi_txopos)) & 0xff);
-}
-
-static void sx_shutdown_port(void *ptr)
-{
- struct sx_port *port = ptr;
-
- func_enter();
-
- port->gs.port.flags &= ~GS_ACTIVE;
- if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) {
- sx_setsignals(port, 0, 0);
- sx_reconfigure_port(port);
- }
-
- func_exit();
-}
-
-/* ********************************************************************** *
- * Here are the routines that actually *
- * interface with the rest of the system *
- * ********************************************************************** */
-
-static int sx_open(struct tty_struct *tty, struct file *filp)
-{
- struct sx_port *port;
- int retval, line;
- unsigned long flags;
-
- func_enter();
-
- if (!sx_initialized) {
- return -EIO;
- }
-
- line = tty->index;
- sx_dprintk(SX_DEBUG_OPEN, "%d: opening line %d. tty=%p ctty=%p, "
- "np=%d)\n", task_pid_nr(current), line, tty,
- current->signal->tty, sx_nports);
-
- if ((line < 0) || (line >= SX_NPORTS) || (line >= sx_nports))
- return -ENODEV;
-
- port = &sx_ports[line];
- port->c_dcd = 0; /* Make sure that the first interrupt doesn't detect a
- 1 -> 0 transition. */
-
- sx_dprintk(SX_DEBUG_OPEN, "port = %p c_dcd = %d\n", port, port->c_dcd);
-
- spin_lock_irqsave(&port->gs.driver_lock, flags);
-
- tty->driver_data = port;
- port->gs.port.tty = tty;
- port->gs.port.count++;
- spin_unlock_irqrestore(&port->gs.driver_lock, flags);
-
- sx_dprintk(SX_DEBUG_OPEN, "starting port\n");
-
- /*
- * Start up serial port
- */
- retval = gs_init_port(&port->gs);
- sx_dprintk(SX_DEBUG_OPEN, "done gs_init\n");
- if (retval) {
- port->gs.port.count--;
- return retval;
- }
-
- port->gs.port.flags |= GS_ACTIVE;
- if (port->gs.port.count <= 1)
- sx_setsignals(port, 1, 1);
-
-#if 0
- if (sx_debug & SX_DEBUG_OPEN)
- my_hd(port, sizeof(*port));
-#else
- if (sx_debug & SX_DEBUG_OPEN)
- my_hd_io(port->board->base + port->ch_base, sizeof(*port));
-#endif
-
- if (port->gs.port.count <= 1) {
- if (sx_send_command(port, HS_LOPEN, -1, HS_IDLE_OPEN) != 1) {
- printk(KERN_ERR "sx: Card didn't respond to LOPEN "
- "command.\n");
- spin_lock_irqsave(&port->gs.driver_lock, flags);
- port->gs.port.count--;
- spin_unlock_irqrestore(&port->gs.driver_lock, flags);
- return -EIO;
- }
- }
-
- retval = gs_block_til_ready(port, filp);
- sx_dprintk(SX_DEBUG_OPEN, "Block til ready returned %d. Count=%d\n",
- retval, port->gs.port.count);
-
- if (retval) {
-/*
- * Don't lower gs.port.count here because sx_close() will be called later
- */
-
- return retval;
- }
- /* tty->low_latency = 1; */
-
- port->c_dcd = sx_carrier_raised(&port->gs.port);
- sx_dprintk(SX_DEBUG_OPEN, "at open: cd=%d\n", port->c_dcd);
-
- func_exit();
- return 0;
-
-}
-
-static void sx_close(void *ptr)
-{
- struct sx_port *port = ptr;
- /* Give the port 5 seconds to close down. */
- int to = 5 * HZ;
-
- func_enter();
-
- sx_setsignals(port, 0, 0);
- sx_reconfigure_port(port);
- sx_send_command(port, HS_CLOSE, 0, 0);
-
- while (to-- && (sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED))
- if (msleep_interruptible(10))
- break;
- if (sx_read_channel_byte(port, hi_hstat) != HS_IDLE_CLOSED) {
- if (sx_send_command(port, HS_FORCE_CLOSED, -1, HS_IDLE_CLOSED)
- != 1) {
- printk(KERN_ERR "sx: sent the force_close command, but "
- "card didn't react\n");
- } else
- sx_dprintk(SX_DEBUG_CLOSE, "sent the force_close "
- "command.\n");
- }
-
- sx_dprintk(SX_DEBUG_CLOSE, "waited %d jiffies for close. count=%d\n",
- 5 * HZ - to - 1, port->gs.port.count);
-
- if (port->gs.port.count) {
- sx_dprintk(SX_DEBUG_CLOSE, "WARNING port count:%d\n",
- port->gs.port.count);
- /*printk("%s SETTING port count to zero: %p count: %d\n",
- __func__, port, port->gs.port.count);
- port->gs.port.count = 0;*/
- }
-
- func_exit();
-}
-
-/* This is relatively thorough. But then again it is only 20 lines. */
-#define MARCHUP for (i = min; i < max; i++)
-#define MARCHDOWN for (i = max - 1; i >= min; i--)
-#define W0 write_sx_byte(board, i, 0x55)
-#define W1 write_sx_byte(board, i, 0xaa)
-#define R0 if (read_sx_byte(board, i) != 0x55) return 1
-#define R1 if (read_sx_byte(board, i) != 0xaa) return 1
-
-/* This memtest takes a human-noticeable time. You normally only do it
- once a boot, so I guess that it is worth it. */
-static int do_memtest(struct sx_board *board, int min, int max)
-{
- int i;
-
- /* This is a marchb. Theoretically, marchb catches much more than
- simpler tests. In practise, the longer test just catches more
- intermittent errors. -- REW
- (For the theory behind memory testing see:
- Testing Semiconductor Memories by A.J. van de Goor.) */
- MARCHUP {
- W0;
- }
- MARCHUP {
- R0;
- W1;
- R1;
- W0;
- R0;
- W1;
- }
- MARCHUP {
- R1;
- W0;
- W1;
- }
- MARCHDOWN {
- R1;
- W0;
- W1;
- W0;
- }
- MARCHDOWN {
- R0;
- W1;
- W0;
- }
-
- return 0;
-}
-
-#undef MARCHUP
-#undef MARCHDOWN
-#undef W0
-#undef W1
-#undef R0
-#undef R1
-
-#define MARCHUP for (i = min; i < max; i += 2)
-#define MARCHDOWN for (i = max - 1; i >= min; i -= 2)
-#define W0 write_sx_word(board, i, 0x55aa)
-#define W1 write_sx_word(board, i, 0xaa55)
-#define R0 if (read_sx_word(board, i) != 0x55aa) return 1
-#define R1 if (read_sx_word(board, i) != 0xaa55) return 1
-
-#if 0
-/* This memtest takes a human-noticeable time. You normally only do it
- once a boot, so I guess that it is worth it. */
-static int do_memtest_w(struct sx_board *board, int min, int max)
-{
- int i;
-
- MARCHUP {
- W0;
- }
- MARCHUP {
- R0;
- W1;
- R1;
- W0;
- R0;
- W1;
- }
- MARCHUP {
- R1;
- W0;
- W1;
- }
- MARCHDOWN {
- R1;
- W0;
- W1;
- W0;
- }
- MARCHDOWN {
- R0;
- W1;
- W0;
- }
-
- return 0;
-}
-#endif
-
-static long sx_fw_ioctl(struct file *filp, unsigned int cmd,
- unsigned long arg)
-{
- long rc = 0;
- int __user *descr = (int __user *)arg;
- int i;
- static struct sx_board *board = NULL;
- int nbytes, offset;
- unsigned long data;
- char *tmp;
-
- func_enter();
-
- if (!capable(CAP_SYS_RAWIO))
- return -EPERM;
-
- tty_lock();
-
- sx_dprintk(SX_DEBUG_FIRMWARE, "IOCTL %x: %lx\n", cmd, arg);
-
- if (!board)
- board = &boards[0];
- if (board->flags & SX_BOARD_PRESENT) {
- sx_dprintk(SX_DEBUG_FIRMWARE, "Board present! (%x)\n",
- board->flags);
- } else {
- sx_dprintk(SX_DEBUG_FIRMWARE, "Board not present! (%x) all:",
- board->flags);
- for (i = 0; i < SX_NBOARDS; i++)
- sx_dprintk(SX_DEBUG_FIRMWARE, "<%x> ", boards[i].flags);
- sx_dprintk(SX_DEBUG_FIRMWARE, "\n");
- rc = -EIO;
- goto out;
- }
-
- switch (cmd) {
- case SXIO_SET_BOARD:
- sx_dprintk(SX_DEBUG_FIRMWARE, "set board to %ld\n", arg);
- rc = -EIO;
- if (arg >= SX_NBOARDS)
- break;
- sx_dprintk(SX_DEBUG_FIRMWARE, "not out of range\n");
- if (!(boards[arg].flags & SX_BOARD_PRESENT))
- break;
- sx_dprintk(SX_DEBUG_FIRMWARE, ".. and present!\n");
- board = &boards[arg];
- rc = 0;
- /* FIXME: And this does ... nothing?? */
- break;
- case SXIO_GET_TYPE:
- rc = -ENOENT; /* If we manage to miss one, return error. */
- if (IS_SX_BOARD(board))
- rc = SX_TYPE_SX;
- if (IS_CF_BOARD(board))
- rc = SX_TYPE_CF;
- if (IS_SI_BOARD(board))
- rc = SX_TYPE_SI;
- if (IS_SI1_BOARD(board))
- rc = SX_TYPE_SI;
- if (IS_EISA_BOARD(board))
- rc = SX_TYPE_SI;
- sx_dprintk(SX_DEBUG_FIRMWARE, "returning type= %ld\n", rc);
- break;
- case SXIO_DO_RAMTEST:
- if (sx_initialized) { /* Already initialized: better not ramtest the board. */
- rc = -EPERM;
- break;
- }
- if (IS_SX_BOARD(board)) {
- rc = do_memtest(board, 0, 0x7000);
- if (!rc)
- rc = do_memtest(board, 0, 0x7000);
- /*if (!rc) rc = do_memtest_w (board, 0, 0x7000); */
- } else {
- rc = do_memtest(board, 0, 0x7ff8);
- /* if (!rc) rc = do_memtest_w (board, 0, 0x7ff8); */
- }
- sx_dprintk(SX_DEBUG_FIRMWARE,
- "returning memtest result= %ld\n", rc);
- break;
- case SXIO_DOWNLOAD:
- if (sx_initialized) {/* Already initialized */
- rc = -EEXIST;
- break;
- }
- if (!sx_reset(board)) {
- rc = -EIO;
- break;
- }
- sx_dprintk(SX_DEBUG_INIT, "reset the board...\n");
-
- tmp = kmalloc(SX_CHUNK_SIZE, GFP_USER);
- if (!tmp) {
- rc = -ENOMEM;
- break;
- }
- /* FIXME: check returns */
- get_user(nbytes, descr++);
- get_user(offset, descr++);
- get_user(data, descr++);
- while (nbytes && data) {
- for (i = 0; i < nbytes; i += SX_CHUNK_SIZE) {
- if (copy_from_user(tmp, (char __user *)data + i,
- (i + SX_CHUNK_SIZE > nbytes) ?
- nbytes - i : SX_CHUNK_SIZE)) {
- kfree(tmp);
- rc = -EFAULT;
- goto out;
- }
- memcpy_toio(board->base2 + offset + i, tmp,
- (i + SX_CHUNK_SIZE > nbytes) ?
- nbytes - i : SX_CHUNK_SIZE);
- }
-
- get_user(nbytes, descr++);
- get_user(offset, descr++);
- get_user(data, descr++);
- }
- kfree(tmp);
- sx_nports += sx_init_board(board);
- rc = sx_nports;
- break;
- case SXIO_INIT:
- if (sx_initialized) { /* Already initialized */
- rc = -EEXIST;
- break;
- }
- /* This is not allowed until all boards are initialized... */
- for (i = 0; i < SX_NBOARDS; i++) {
- if ((boards[i].flags & SX_BOARD_PRESENT) &&
- !(boards[i].flags & SX_BOARD_INITIALIZED)) {
- rc = -EIO;
- break;
- }
- }
- for (i = 0; i < SX_NBOARDS; i++)
- if (!(boards[i].flags & SX_BOARD_PRESENT))
- break;
-
- sx_dprintk(SX_DEBUG_FIRMWARE, "initing portstructs, %d boards, "
- "%d channels, first board: %d ports\n",
- i, sx_nports, boards[0].nports);
- rc = sx_init_portstructs(i, sx_nports);
- sx_init_drivers();
- if (rc >= 0)
- sx_initialized++;
- break;
- case SXIO_SETDEBUG:
- sx_debug = arg;
- break;
- case SXIO_GETDEBUG:
- rc = sx_debug;
- break;
- case SXIO_GETGSDEBUG:
- case SXIO_SETGSDEBUG:
- rc = -EINVAL;
- break;
- case SXIO_GETNPORTS:
- rc = sx_nports;
- break;
- default:
- rc = -ENOTTY;
- break;
- }
-out:
- tty_unlock();
- func_exit();
- return rc;
-}
-
-static int sx_break(struct tty_struct *tty, int flag)
-{
- struct sx_port *port = tty->driver_data;
- int rv;
-
- func_enter();
- tty_lock();
-
- if (flag)
- rv = sx_send_command(port, HS_START, -1, HS_IDLE_BREAK);
- else
- rv = sx_send_command(port, HS_STOP, -1, HS_IDLE_OPEN);
- if (rv != 1)
- printk(KERN_ERR "sx: couldn't send break (%x).\n",
- read_sx_byte(port->board, CHAN_OFFSET(port, hi_hstat)));
- tty_unlock();
- func_exit();
- return 0;
-}
-
-static int sx_tiocmget(struct tty_struct *tty)
-{
- struct sx_port *port = tty->driver_data;
- return sx_getsignals(port);
-}
-
-static int sx_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
-{
- struct sx_port *port = tty->driver_data;
- int rts = -1, dtr = -1;
-
- if (set & TIOCM_RTS)
- rts = 1;
- if (set & TIOCM_DTR)
- dtr = 1;
- if (clear & TIOCM_RTS)
- rts = 0;
- if (clear & TIOCM_DTR)
- dtr = 0;
-
- sx_setsignals(port, dtr, rts);
- sx_reconfigure_port(port);
- return 0;
-}
-
-static int sx_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- int rc;
- struct sx_port *port = tty->driver_data;
- void __user *argp = (void __user *)arg;
-
- /* func_enter2(); */
-
- rc = 0;
- tty_lock();
- switch (cmd) {
- case TIOCGSERIAL:
- rc = gs_getserial(&port->gs, argp);
- break;
- case TIOCSSERIAL:
- rc = gs_setserial(&port->gs, argp);
- break;
- default:
- rc = -ENOIOCTLCMD;
- break;
- }
- tty_unlock();
-
- /* func_exit(); */
- return rc;
-}
-
-/* The throttle/unthrottle scheme for the Specialix card is different
- * from other drivers and deserves some explanation.
- * The Specialix hardware takes care of XON/XOFF
- * and CTS/RTS flow control itself. This means that all we have to
- * do when signalled by the upper tty layer to throttle/unthrottle is
- * to make a note of it here. When we come to read characters from the
- * rx buffers on the card (sx_receive_chars()) we look to see if the
- * upper layer can accept more (as noted here in sx_rx_throt[]).
- * If it can't we simply don't remove chars from the cards buffer.
- * When the tty layer can accept chars, we again note that here and when
- * sx_receive_chars() is called it will remove them from the cards buffer.
- * The card will notice that a ports buffer has drained below some low
- * water mark and will unflow control the line itself, using whatever
- * flow control scheme is in use for that port. -- Simon Allen
- */
-
-static void sx_throttle(struct tty_struct *tty)
-{
- struct sx_port *port = tty->driver_data;
-
- func_enter2();
- /* If the port is using any type of input flow
- * control then throttle the port.
- */
- if ((tty->termios->c_cflag & CRTSCTS) || (I_IXOFF(tty))) {
- port->gs.port.flags |= SX_RX_THROTTLE;
- }
- func_exit();
-}
-
-static void sx_unthrottle(struct tty_struct *tty)
-{
- struct sx_port *port = tty->driver_data;
-
- func_enter2();
- /* Always unthrottle even if flow control is not enabled on
- * this port in case we disabled flow control while the port
- * was throttled
- */
- port->gs.port.flags &= ~SX_RX_THROTTLE;
- func_exit();
- return;
-}
-
-/* ********************************************************************** *
- * Here are the initialization routines. *
- * ********************************************************************** */
-
-static int sx_init_board(struct sx_board *board)
-{
- int addr;
- int chans;
- int type;
-
- func_enter();
-
- /* This is preceded by downloading the download code. */
-
- board->flags |= SX_BOARD_INITIALIZED;
-
- if (read_sx_byte(board, 0))
- /* CF boards may need this. */
- write_sx_byte(board, 0, 0);
-
- /* This resets the processor again, to make sure it didn't do any
- foolish things while we were downloading the image */
- if (!sx_reset(board))
- return 0;
-
- sx_start_board(board);
- udelay(10);
- if (!sx_busy_wait_neq(board, 0, 0xff, 0)) {
- printk(KERN_ERR "sx: Ooops. Board won't initialize.\n");
- return 0;
- }
-
- /* Ok. So now the processor on the card is running. It gathered
- some info for us... */
- sx_dprintk(SX_DEBUG_INIT, "The sxcard structure:\n");
- if (sx_debug & SX_DEBUG_INIT)
- my_hd_io(board->base, 0x10);
- sx_dprintk(SX_DEBUG_INIT, "the first sx_module structure:\n");
- if (sx_debug & SX_DEBUG_INIT)
- my_hd_io(board->base + 0x80, 0x30);
-
- sx_dprintk(SX_DEBUG_INIT, "init_status: %x, %dk memory, firmware "
- "V%x.%02x,\n",
- read_sx_byte(board, 0), read_sx_byte(board, 1),
- read_sx_byte(board, 5), read_sx_byte(board, 4));
-
- if (read_sx_byte(board, 0) == 0xff) {
- printk(KERN_INFO "sx: No modules found. Sorry.\n");
- board->nports = 0;
- return 0;
- }
-
- chans = 0;
-
- if (IS_SX_BOARD(board)) {
- sx_write_board_word(board, cc_int_count, sx_maxints);
- } else {
- if (sx_maxints)
- sx_write_board_word(board, cc_int_count,
- SI_PROCESSOR_CLOCK / 8 / sx_maxints);
- }
-
- /* grab the first module type... */
- /* board->ta_type = mod_compat_type (read_sx_byte (board, 0x80 + 0x08)); */
- board->ta_type = mod_compat_type(sx_read_module_byte(board, 0x80,
- mc_chip));
-
- /* XXX byteorder */
- for (addr = 0x80; addr != 0; addr = read_sx_word(board, addr) & 0x7fff){
- type = sx_read_module_byte(board, addr, mc_chip);
- sx_dprintk(SX_DEBUG_INIT, "Module at %x: %d channels\n",
- addr, read_sx_byte(board, addr + 2));
-
- chans += sx_read_module_byte(board, addr, mc_type);
-
- sx_dprintk(SX_DEBUG_INIT, "module is an %s, which has %s/%s "
- "panels\n",
- mod_type_s(type),
- pan_type_s(sx_read_module_byte(board, addr,
- mc_mods) & 0xf),
- pan_type_s(sx_read_module_byte(board, addr,
- mc_mods) >> 4));
-
- sx_dprintk(SX_DEBUG_INIT, "CD1400 versions: %x/%x, ASIC "
- "version: %x\n",
- sx_read_module_byte(board, addr, mc_rev1),
- sx_read_module_byte(board, addr, mc_rev2),
- sx_read_module_byte(board, addr, mc_mtaasic_rev));
-
- /* The following combinations are illegal: It should theoretically
- work, but timing problems make the bus HANG. */
-
- if (mod_compat_type(type) != board->ta_type) {
- printk(KERN_ERR "sx: This is an invalid "
- "configuration.\nDon't mix TA/MTA/SXDC on the "
- "same hostadapter.\n");
- chans = 0;
- break;
- }
- if ((IS_EISA_BOARD(board) ||
- IS_SI_BOARD(board)) &&
- (mod_compat_type(type) == 4)) {
- printk(KERN_ERR "sx: This is an invalid "
- "configuration.\nDon't use SXDCs on an SI/XIO "
- "adapter.\n");
- chans = 0;
- break;
- }
-#if 0 /* Problem fixed: firmware 3.05 */
- if (IS_SX_BOARD(board) && (type == TA8)) {
- /* There are some issues with the firmware and the DCD/RTS
- lines. It might work if you tie them together or something.
- It might also work if you get a newer sx_firmware. Therefore
- this is just a warning. */
- printk(KERN_WARNING
- "sx: The SX host doesn't work too well "
- "with the TA8 adapters.\nSpecialix is working on it.\n");
- }
-#endif
- }
-
- if (chans) {
- if (board->irq > 0) {
- /* fixed irq, probably PCI */
- if (sx_irqmask & (1 << board->irq)) { /* may we use this irq? */
- if (request_irq(board->irq, sx_interrupt,
- IRQF_SHARED | IRQF_DISABLED,
- "sx", board)) {
- printk(KERN_ERR "sx: Cannot allocate "
- "irq %d.\n", board->irq);
- board->irq = 0;
- }
- } else
- board->irq = 0;
- } else if (board->irq < 0 && sx_irqmask) {
- /* auto-allocate irq */
- int irqnr;
- int irqmask = sx_irqmask & (IS_SX_BOARD(board) ?
- SX_ISA_IRQ_MASK : SI2_ISA_IRQ_MASK);
- for (irqnr = 15; irqnr > 0; irqnr--)
- if (irqmask & (1 << irqnr))
- if (!request_irq(irqnr, sx_interrupt,
- IRQF_SHARED | IRQF_DISABLED,
- "sx", board))
- break;
- if (!irqnr)
- printk(KERN_ERR "sx: Cannot allocate IRQ.\n");
- board->irq = irqnr;
- } else
- board->irq = 0;
-
- if (board->irq) {
- /* Found a valid interrupt, start up interrupts! */
- sx_dprintk(SX_DEBUG_INIT, "Using irq %d.\n",
- board->irq);
- sx_start_interrupts(board);
- board->poll = sx_slowpoll;
- board->flags |= SX_IRQ_ALLOCATED;
- } else {
- /* no irq: setup board for polled operation */
- board->poll = sx_poll;
- sx_dprintk(SX_DEBUG_INIT, "Using poll-interval %d.\n",
- board->poll);
- }
-
- /* The timer should be initialized anyway: That way we can
- safely del_timer it when the module is unloaded. */
- setup_timer(&board->timer, sx_pollfunc, (unsigned long)board);
-
- if (board->poll)
- mod_timer(&board->timer, jiffies + board->poll);
- } else {
- board->irq = 0;
- }
-
- board->nports = chans;
- sx_dprintk(SX_DEBUG_INIT, "returning %d ports.", board->nports);
-
- func_exit();
- return chans;
-}
-
-static void __devinit printheader(void)
-{
- static int header_printed;
-
- if (!header_printed) {
- printk(KERN_INFO "Specialix SX driver "
- "(C) 1998/1999 R.E.Wolff@BitWizard.nl\n");
- printk(KERN_INFO "sx: version " __stringify(SX_VERSION) "\n");
- header_printed = 1;
- }
-}
-
-static int __devinit probe_sx(struct sx_board *board)
-{
- struct vpd_prom vpdp;
- char *p;
- int i;
-
- func_enter();
-
- if (!IS_CF_BOARD(board)) {
- sx_dprintk(SX_DEBUG_PROBE, "Going to verify vpd prom at %p.\n",
- board->base + SX_VPD_ROM);
-
- if (sx_debug & SX_DEBUG_PROBE)
- my_hd_io(board->base + SX_VPD_ROM, 0x40);
-
- p = (char *)&vpdp;
- for (i = 0; i < sizeof(struct vpd_prom); i++)
- *p++ = read_sx_byte(board, SX_VPD_ROM + i * 2);
-
- if (sx_debug & SX_DEBUG_PROBE)
- my_hd(&vpdp, 0x20);
-
- sx_dprintk(SX_DEBUG_PROBE, "checking identifier...\n");
-
- if (strncmp(vpdp.identifier, SX_VPD_IDENT_STRING, 16) != 0) {
- sx_dprintk(SX_DEBUG_PROBE, "Got non-SX identifier: "
- "'%s'\n", vpdp.identifier);
- return 0;
- }
- }
-
- printheader();
-
- if (!IS_CF_BOARD(board)) {
- printk(KERN_DEBUG "sx: Found an SX board at %lx\n",
- board->hw_base);
- printk(KERN_DEBUG "sx: hw_rev: %d, assembly level: %d, "
- "uniq ID:%08x, ",
- vpdp.hwrev, vpdp.hwass, vpdp.uniqid);
- printk("Manufactured: %d/%d\n", 1970 + vpdp.myear, vpdp.mweek);
-
- if ((((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) !=
- SX_PCI_UNIQUEID1) && (((vpdp.uniqid >> 24) &
- SX_UNIQUEID_MASK) != SX_ISA_UNIQUEID1)) {
- /* This might be a bit harsh. This was the primary
- reason the SX/ISA card didn't work at first... */
- printk(KERN_ERR "sx: Hmm. Not an SX/PCI or SX/ISA "
- "card. Sorry: giving up.\n");
- return (0);
- }
-
- if (((vpdp.uniqid >> 24) & SX_UNIQUEID_MASK) ==
- SX_ISA_UNIQUEID1) {
- if (((unsigned long)board->hw_base) & 0x8000) {
- printk(KERN_WARNING "sx: Warning: There may be "
- "hardware problems with the card at "
- "%lx.\n", board->hw_base);
- printk(KERN_WARNING "sx: Read sx.txt for more "
- "info.\n");
- }
- }
- }
-
- board->nports = -1;
-
- /* This resets the processor, and keeps it off the bus. */
- if (!sx_reset(board))
- return 0;
- sx_dprintk(SX_DEBUG_INIT, "reset the board...\n");
-
- func_exit();
- return 1;
-}
-
-#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
-
-/* Specialix probes for this card at 32k increments from 640k to 16M.
- I consider machines with less than 16M unlikely nowadays, so I'm
- not probing above 1Mb. Also, 0xa0000, 0xb0000, are taken by the VGA
- card. 0xe0000 and 0xf0000 are taken by the BIOS. That only leaves
- 0xc0000, 0xc8000, 0xd0000 and 0xd8000 . */
-
-static int __devinit probe_si(struct sx_board *board)
-{
- int i;
-
- func_enter();
- sx_dprintk(SX_DEBUG_PROBE, "Going to verify SI signature hw %lx at "
- "%p.\n", board->hw_base, board->base + SI2_ISA_ID_BASE);
-
- if (sx_debug & SX_DEBUG_PROBE)
- my_hd_io(board->base + SI2_ISA_ID_BASE, 0x8);
-
- if (!IS_EISA_BOARD(board)) {
- if (IS_SI1_BOARD(board)) {
- for (i = 0; i < 8; i++) {
- write_sx_byte(board, SI2_ISA_ID_BASE + 7 - i,i);
- }
- }
- for (i = 0; i < 8; i++) {
- if ((read_sx_byte(board, SI2_ISA_ID_BASE + 7 - i) & 7)
- != i) {
- func_exit();
- return 0;
- }
- }
- }
-
- /* Now we're pretty much convinced that there is an SI board here,
- but to prevent trouble, we'd better double check that we don't
- have an SI1 board when we're probing for an SI2 board.... */
-
- write_sx_byte(board, SI2_ISA_ID_BASE, 0x10);
- if (IS_SI1_BOARD(board)) {
- /* This should be an SI1 board, which has this
- location writable... */
- if (read_sx_byte(board, SI2_ISA_ID_BASE) != 0x10) {
- func_exit();
- return 0;
- }
- } else {
- /* This should be an SI2 board, which has the bottom
- 3 bits non-writable... */
- if (read_sx_byte(board, SI2_ISA_ID_BASE) == 0x10) {
- func_exit();
- return 0;
- }
- }
-
- /* Now we're pretty much convinced that there is an SI board here,
- but to prevent trouble, we'd better double check that we don't
- have an SI1 board when we're probing for an SI2 board.... */
-
- write_sx_byte(board, SI2_ISA_ID_BASE, 0x10);
- if (IS_SI1_BOARD(board)) {
- /* This should be an SI1 board, which has this
- location writable... */
- if (read_sx_byte(board, SI2_ISA_ID_BASE) != 0x10) {
- func_exit();
- return 0;
- }
- } else {
- /* This should be an SI2 board, which has the bottom
- 3 bits non-writable... */
- if (read_sx_byte(board, SI2_ISA_ID_BASE) == 0x10) {
- func_exit();
- return 0;
- }
- }
-
- printheader();
-
- printk(KERN_DEBUG "sx: Found an SI board at %lx\n", board->hw_base);
- /* Compared to the SX boards, it is a complete guess as to what
- this card is up to... */
-
- board->nports = -1;
-
- /* This resets the processor, and keeps it off the bus. */
- if (!sx_reset(board))
- return 0;
- sx_dprintk(SX_DEBUG_INIT, "reset the board...\n");
-
- func_exit();
- return 1;
-}
-#endif
-
-static const struct tty_operations sx_ops = {
- .break_ctl = sx_break,
- .open = sx_open,
- .close = gs_close,
- .write = gs_write,
- .put_char = gs_put_char,
- .flush_chars = gs_flush_chars,
- .write_room = gs_write_room,
- .chars_in_buffer = gs_chars_in_buffer,
- .flush_buffer = gs_flush_buffer,
- .ioctl = sx_ioctl,
- .throttle = sx_throttle,
- .unthrottle = sx_unthrottle,
- .set_termios = gs_set_termios,
- .stop = gs_stop,
- .start = gs_start,
- .hangup = gs_hangup,
- .tiocmget = sx_tiocmget,
- .tiocmset = sx_tiocmset,
-};
-
-static const struct tty_port_operations sx_port_ops = {
- .carrier_raised = sx_carrier_raised,
-};
-
-static int sx_init_drivers(void)
-{
- int error;
-
- func_enter();
-
- sx_driver = alloc_tty_driver(sx_nports);
- if (!sx_driver)
- return 1;
- sx_driver->owner = THIS_MODULE;
- sx_driver->driver_name = "specialix_sx";
- sx_driver->name = "ttyX";
- sx_driver->major = SX_NORMAL_MAJOR;
- sx_driver->type = TTY_DRIVER_TYPE_SERIAL;
- sx_driver->subtype = SERIAL_TYPE_NORMAL;
- sx_driver->init_termios = tty_std_termios;
- sx_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- sx_driver->init_termios.c_ispeed = 9600;
- sx_driver->init_termios.c_ospeed = 9600;
- sx_driver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(sx_driver, &sx_ops);
-
- if ((error = tty_register_driver(sx_driver))) {
- put_tty_driver(sx_driver);
- printk(KERN_ERR "sx: Couldn't register sx driver, error = %d\n",
- error);
- return 1;
- }
- func_exit();
- return 0;
-}
-
-static int sx_init_portstructs(int nboards, int nports)
-{
- struct sx_board *board;
- struct sx_port *port;
- int i, j;
- int addr, chans;
- int portno;
-
- func_enter();
-
- /* Many drivers statically allocate the maximum number of ports
- There is no reason not to allocate them dynamically.
- Is there? -- REW */
- sx_ports = kcalloc(nports, sizeof(struct sx_port), GFP_KERNEL);
- if (!sx_ports)
- return -ENOMEM;
-
- port = sx_ports;
- for (i = 0; i < nboards; i++) {
- board = &boards[i];
- board->ports = port;
- for (j = 0; j < boards[i].nports; j++) {
- sx_dprintk(SX_DEBUG_INIT, "initing port %d\n", j);
- tty_port_init(&port->gs.port);
- port->gs.port.ops = &sx_port_ops;
- port->gs.magic = SX_MAGIC;
- port->gs.close_delay = HZ / 2;
- port->gs.closing_wait = 30 * HZ;
- port->board = board;
- port->gs.rd = &sx_real_driver;
-#ifdef NEW_WRITE_LOCKING
- port->gs.port_write_mutex = MUTEX;
-#endif
- spin_lock_init(&port->gs.driver_lock);
- /*
- * Initializing wait queue
- */
- port++;
- }
- }
-
- port = sx_ports;
- portno = 0;
- for (i = 0; i < nboards; i++) {
- board = &boards[i];
- board->port_base = portno;
- /* Possibly the configuration was rejected. */
- sx_dprintk(SX_DEBUG_PROBE, "Board has %d channels\n",
- board->nports);
- if (board->nports <= 0)
- continue;
- /* XXX byteorder ?? */
- for (addr = 0x80; addr != 0;
- addr = read_sx_word(board, addr) & 0x7fff) {
- chans = sx_read_module_byte(board, addr, mc_type);
- sx_dprintk(SX_DEBUG_PROBE, "Module at %x: %d "
- "channels\n", addr, chans);
- sx_dprintk(SX_DEBUG_PROBE, "Port at");
- for (j = 0; j < chans; j++) {
- /* The "sx-way" is the way it SHOULD be done.
- That way in the future, the firmware may for
- example pack the structures a bit more
- efficient. Neil tells me it isn't going to
- happen anytime soon though. */
- if (IS_SX_BOARD(board))
- port->ch_base = sx_read_module_word(
- board, addr + j * 2,
- mc_chan_pointer);
- else
- port->ch_base = addr + 0x100 + 0x300 *j;
-
- sx_dprintk(SX_DEBUG_PROBE, " %x",
- port->ch_base);
- port->line = portno++;
- port++;
- }
- sx_dprintk(SX_DEBUG_PROBE, "\n");
- }
- /* This has to be done earlier. */
- /* board->flags |= SX_BOARD_INITIALIZED; */
- }
-
- func_exit();
- return 0;
-}
-
-static unsigned int sx_find_free_board(void)
-{
- unsigned int i;
-
- for (i = 0; i < SX_NBOARDS; i++)
- if (!(boards[i].flags & SX_BOARD_PRESENT))
- break;
-
- return i;
-}
-
-static void __exit sx_release_drivers(void)
-{
- func_enter();
- tty_unregister_driver(sx_driver);
- put_tty_driver(sx_driver);
- func_exit();
-}
-
-static void __devexit sx_remove_card(struct sx_board *board,
- struct pci_dev *pdev)
-{
- if (board->flags & SX_BOARD_INITIALIZED) {
- /* The board should stop messing with us. (actually I mean the
- interrupt) */
- sx_reset(board);
- if ((board->irq) && (board->flags & SX_IRQ_ALLOCATED))
- free_irq(board->irq, board);
-
- /* It is safe/allowed to del_timer a non-active timer */
- del_timer(&board->timer);
- if (pdev) {
-#ifdef CONFIG_PCI
- iounmap(board->base2);
- pci_release_region(pdev, IS_CF_BOARD(board) ? 3 : 2);
-#endif
- } else {
- iounmap(board->base);
- release_region(board->hw_base, board->hw_len);
- }
-
- board->flags &= ~(SX_BOARD_INITIALIZED | SX_BOARD_PRESENT);
- }
-}
-
-#ifdef CONFIG_EISA
-
-static int __devinit sx_eisa_probe(struct device *dev)
-{
- struct eisa_device *edev = to_eisa_device(dev);
- struct sx_board *board;
- unsigned long eisa_slot = edev->base_addr;
- unsigned int i;
- int retval = -EIO;
-
- mutex_lock(&sx_boards_lock);
- i = sx_find_free_board();
- if (i == SX_NBOARDS) {
- mutex_unlock(&sx_boards_lock);
- goto err;
- }
- board = &boards[i];
- board->flags |= SX_BOARD_PRESENT;
- mutex_unlock(&sx_boards_lock);
-
- dev_info(dev, "XIO : Signature found in EISA slot %lu, "
- "Product %d Rev %d (REPORT THIS TO LKLM)\n",
- eisa_slot >> 12,
- inb(eisa_slot + EISA_VENDOR_ID_OFFSET + 2),
- inb(eisa_slot + EISA_VENDOR_ID_OFFSET + 3));
-
- board->eisa_base = eisa_slot;
- board->flags &= ~SX_BOARD_TYPE;
- board->flags |= SI_EISA_BOARD;
-
- board->hw_base = ((inb(eisa_slot + 0xc01) << 8) +
- inb(eisa_slot + 0xc00)) << 16;
- board->hw_len = SI2_EISA_WINDOW_LEN;
- if (!request_region(board->hw_base, board->hw_len, "sx")) {
- dev_err(dev, "can't request region\n");
- goto err_flag;
- }
- board->base2 =
- board->base = ioremap_nocache(board->hw_base, SI2_EISA_WINDOW_LEN);
- if (!board->base) {
- dev_err(dev, "can't remap memory\n");
- goto err_reg;
- }
-
- sx_dprintk(SX_DEBUG_PROBE, "IO hw_base address: %lx\n", board->hw_base);
- sx_dprintk(SX_DEBUG_PROBE, "base: %p\n", board->base);
- board->irq = inb(eisa_slot + 0xc02) >> 4;
- sx_dprintk(SX_DEBUG_PROBE, "IRQ: %d\n", board->irq);
-
- if (!probe_si(board))
- goto err_unmap;
-
- dev_set_drvdata(dev, board);
-
- return 0;
-err_unmap:
- iounmap(board->base);
-err_reg:
- release_region(board->hw_base, board->hw_len);
-err_flag:
- board->flags &= ~SX_BOARD_PRESENT;
-err:
- return retval;
-}
-
-static int __devexit sx_eisa_remove(struct device *dev)
-{
- struct sx_board *board = dev_get_drvdata(dev);
-
- sx_remove_card(board, NULL);
-
- return 0;
-}
-
-static struct eisa_device_id sx_eisa_tbl[] = {
- { "SLX" },
- { "" }
-};
-
-MODULE_DEVICE_TABLE(eisa, sx_eisa_tbl);
-
-static struct eisa_driver sx_eisadriver = {
- .id_table = sx_eisa_tbl,
- .driver = {
- .name = "sx",
- .probe = sx_eisa_probe,
- .remove = __devexit_p(sx_eisa_remove),
- }
-};
-
-#endif
-
-#ifdef CONFIG_PCI
- /********************************************************
- * Setting bit 17 in the CNTRL register of the PLX 9050 *
- * chip forces a retry on writes while a read is pending.*
- * This is to prevent the card locking up on Intel Xeon *
- * multiprocessor systems with the NX chipset. -- NV *
- ********************************************************/
-
-/* Newer cards are produced with this bit set from the configuration
- EEprom. As the bit is read/write for the CPU, we can fix it here,
- if we detect that it isn't set correctly. -- REW */
-
-static void __devinit fix_sx_pci(struct pci_dev *pdev, struct sx_board *board)
-{
- unsigned int hwbase;
- void __iomem *rebase;
- unsigned int t;
-
-#define CNTRL_REG_OFFSET 0x50
-#define CNTRL_REG_GOODVALUE 0x18260000
-
- pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &hwbase);
- hwbase &= PCI_BASE_ADDRESS_MEM_MASK;
- rebase = ioremap_nocache(hwbase, 0x80);
- t = readl(rebase + CNTRL_REG_OFFSET);
- if (t != CNTRL_REG_GOODVALUE) {
- printk(KERN_DEBUG "sx: performing cntrl reg fix: %08x -> "
- "%08x\n", t, CNTRL_REG_GOODVALUE);
- writel(CNTRL_REG_GOODVALUE, rebase + CNTRL_REG_OFFSET);
- }
- iounmap(rebase);
-}
-#endif
-
-static int __devinit sx_pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
-#ifdef CONFIG_PCI
- struct sx_board *board;
- unsigned int i, reg;
- int retval = -EIO;
-
- mutex_lock(&sx_boards_lock);
- i = sx_find_free_board();
- if (i == SX_NBOARDS) {
- mutex_unlock(&sx_boards_lock);
- goto err;
- }
- board = &boards[i];
- board->flags |= SX_BOARD_PRESENT;
- mutex_unlock(&sx_boards_lock);
-
- retval = pci_enable_device(pdev);
- if (retval)
- goto err_flag;
-
- board->flags &= ~SX_BOARD_TYPE;
- board->flags |= (pdev->subsystem_vendor == 0x200) ? SX_PCI_BOARD :
- SX_CFPCI_BOARD;
-
- /* CF boards use base address 3.... */
- reg = IS_CF_BOARD(board) ? 3 : 2;
- retval = pci_request_region(pdev, reg, "sx");
- if (retval) {
- dev_err(&pdev->dev, "can't request region\n");
- goto err_flag;
- }
- board->hw_base = pci_resource_start(pdev, reg);
- board->base2 =
- board->base = ioremap_nocache(board->hw_base, WINDOW_LEN(board));
- if (!board->base) {
- dev_err(&pdev->dev, "ioremap failed\n");
- goto err_reg;
- }
-
- /* Most of the stuff on the CF board is offset by 0x18000 .... */
- if (IS_CF_BOARD(board))
- board->base += 0x18000;
-
- board->irq = pdev->irq;
-
- dev_info(&pdev->dev, "Got a specialix card: %p(%d) %x.\n", board->base,
- board->irq, board->flags);
-
- if (!probe_sx(board)) {
- retval = -EIO;
- goto err_unmap;
- }
-
- fix_sx_pci(pdev, board);
-
- pci_set_drvdata(pdev, board);
-
- return 0;
-err_unmap:
- iounmap(board->base2);
-err_reg:
- pci_release_region(pdev, reg);
-err_flag:
- board->flags &= ~SX_BOARD_PRESENT;
-err:
- return retval;
-#else
- return -ENODEV;
-#endif
-}
-
-static void __devexit sx_pci_remove(struct pci_dev *pdev)
-{
- struct sx_board *board = pci_get_drvdata(pdev);
-
- sx_remove_card(board, pdev);
-}
-
-/* Specialix has a whole bunch of cards with 0x2000 as the device ID. They say
- its because the standard requires it. So check for SUBVENDOR_ID. */
-static struct pci_device_id sx_pci_tbl[] = {
- { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8,
- .subvendor = PCI_ANY_ID, .subdevice = 0x0200 },
- { PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_SX_XIO_IO8,
- .subvendor = PCI_ANY_ID, .subdevice = 0x0300 },
- { 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, sx_pci_tbl);
-
-static struct pci_driver sx_pcidriver = {
- .name = "sx",
- .id_table = sx_pci_tbl,
- .probe = sx_pci_probe,
- .remove = __devexit_p(sx_pci_remove)
-};
-
-static int __init sx_init(void)
-{
-#ifdef CONFIG_EISA
- int retval1;
-#endif
-#ifdef CONFIG_ISA
- struct sx_board *board;
- unsigned int i;
-#endif
- unsigned int found = 0;
- int retval;
-
- func_enter();
- sx_dprintk(SX_DEBUG_INIT, "Initing sx module... (sx_debug=%d)\n",
- sx_debug);
- if (abs((long)(&sx_debug) - sx_debug) < 0x10000) {
- printk(KERN_WARNING "sx: sx_debug is an address, instead of a "
- "value. Assuming -1.\n(%p)\n", &sx_debug);
- sx_debug = -1;
- }
-
- if (misc_register(&sx_fw_device) < 0) {
- printk(KERN_ERR "SX: Unable to register firmware loader "
- "driver.\n");
- return -EIO;
- }
-#ifdef CONFIG_ISA
- for (i = 0; i < NR_SX_ADDRS; i++) {
- board = &boards[found];
- board->hw_base = sx_probe_addrs[i];
- board->hw_len = SX_WINDOW_LEN;
- if (!request_region(board->hw_base, board->hw_len, "sx"))
- continue;
- board->base2 =
- board->base = ioremap_nocache(board->hw_base, board->hw_len);
- if (!board->base)
- goto err_sx_reg;
- board->flags &= ~SX_BOARD_TYPE;
- board->flags |= SX_ISA_BOARD;
- board->irq = sx_irqmask ? -1 : 0;
-
- if (probe_sx(board)) {
- board->flags |= SX_BOARD_PRESENT;
- found++;
- } else {
- iounmap(board->base);
-err_sx_reg:
- release_region(board->hw_base, board->hw_len);
- }
- }
-
- for (i = 0; i < NR_SI_ADDRS; i++) {
- board = &boards[found];
- board->hw_base = si_probe_addrs[i];
- board->hw_len = SI2_ISA_WINDOW_LEN;
- if (!request_region(board->hw_base, board->hw_len, "sx"))
- continue;
- board->base2 =
- board->base = ioremap_nocache(board->hw_base, board->hw_len);
- if (!board->base)
- goto err_si_reg;
- board->flags &= ~SX_BOARD_TYPE;
- board->flags |= SI_ISA_BOARD;
- board->irq = sx_irqmask ? -1 : 0;
-
- if (probe_si(board)) {
- board->flags |= SX_BOARD_PRESENT;
- found++;
- } else {
- iounmap(board->base);
-err_si_reg:
- release_region(board->hw_base, board->hw_len);
- }
- }
- for (i = 0; i < NR_SI1_ADDRS; i++) {
- board = &boards[found];
- board->hw_base = si1_probe_addrs[i];
- board->hw_len = SI1_ISA_WINDOW_LEN;
- if (!request_region(board->hw_base, board->hw_len, "sx"))
- continue;
- board->base2 =
- board->base = ioremap_nocache(board->hw_base, board->hw_len);
- if (!board->base)
- goto err_si1_reg;
- board->flags &= ~SX_BOARD_TYPE;
- board->flags |= SI1_ISA_BOARD;
- board->irq = sx_irqmask ? -1 : 0;
-
- if (probe_si(board)) {
- board->flags |= SX_BOARD_PRESENT;
- found++;
- } else {
- iounmap(board->base);
-err_si1_reg:
- release_region(board->hw_base, board->hw_len);
- }
- }
-#endif
-#ifdef CONFIG_EISA
- retval1 = eisa_driver_register(&sx_eisadriver);
-#endif
- retval = pci_register_driver(&sx_pcidriver);
-
- if (found) {
- printk(KERN_INFO "sx: total of %d boards detected.\n", found);
- retval = 0;
- } else if (retval) {
-#ifdef CONFIG_EISA
- retval = retval1;
- if (retval1)
-#endif
- misc_deregister(&sx_fw_device);
- }
-
- func_exit();
- return retval;
-}
-
-static void __exit sx_exit(void)
-{
- int i;
-
- func_enter();
-#ifdef CONFIG_EISA
- eisa_driver_unregister(&sx_eisadriver);
-#endif
- pci_unregister_driver(&sx_pcidriver);
-
- for (i = 0; i < SX_NBOARDS; i++)
- sx_remove_card(&boards[i], NULL);
-
- if (misc_deregister(&sx_fw_device) < 0) {
- printk(KERN_INFO "sx: couldn't deregister firmware loader "
- "device\n");
- }
- sx_dprintk(SX_DEBUG_CLEANUP, "Cleaning up drivers (%d)\n",
- sx_initialized);
- if (sx_initialized)
- sx_release_drivers();
-
- kfree(sx_ports);
- func_exit();
-}
-
-module_init(sx_init);
-module_exit(sx_exit);
+++ /dev/null
-
-/*
- * sx.h
- *
- * Copyright (C) 1998/1999 R.E.Wolff@BitWizard.nl
- *
- * SX serial driver.
- * -- Supports SI, XIO and SX host cards.
- * -- Supports TAs, MTAs and SXDCs.
- *
- * Version 1.3 -- March, 1999.
- *
- */
-
-#define SX_NBOARDS 4
-#define SX_PORTSPERBOARD 32
-#define SX_NPORTS (SX_NBOARDS * SX_PORTSPERBOARD)
-
-#ifdef __KERNEL__
-
-#define SX_MAGIC 0x12345678
-
-struct sx_port {
- struct gs_port gs;
- struct wait_queue *shutdown_wait;
- int ch_base;
- int c_dcd;
- struct sx_board *board;
- int line;
- unsigned long locks;
-};
-
-struct sx_board {
- int magic;
- void __iomem *base;
- void __iomem *base2;
- unsigned long hw_base;
- resource_size_t hw_len;
- int eisa_base;
- int port_base; /* Number of the first port */
- struct sx_port *ports;
- int nports;
- int flags;
- int irq;
- int poll;
- int ta_type;
- struct timer_list timer;
- unsigned long locks;
-};
-
-struct vpd_prom {
- unsigned short id;
- char hwrev;
- char hwass;
- int uniqid;
- char myear;
- char mweek;
- char hw_feature[5];
- char oem_id;
- char identifier[16];
-};
-
-#ifndef MOD_RS232DB25MALE
-#define MOD_RS232DB25MALE 0x0a
-#endif
-
-#define SI_ISA_BOARD 0x00000001
-#define SX_ISA_BOARD 0x00000002
-#define SX_PCI_BOARD 0x00000004
-#define SX_CFPCI_BOARD 0x00000008
-#define SX_CFISA_BOARD 0x00000010
-#define SI_EISA_BOARD 0x00000020
-#define SI1_ISA_BOARD 0x00000040
-
-#define SX_BOARD_PRESENT 0x00001000
-#define SX_BOARD_INITIALIZED 0x00002000
-#define SX_IRQ_ALLOCATED 0x00004000
-
-#define SX_BOARD_TYPE 0x000000ff
-
-#define IS_SX_BOARD(board) (board->flags & (SX_PCI_BOARD | SX_CFPCI_BOARD | \
- SX_ISA_BOARD | SX_CFISA_BOARD))
-
-#define IS_SI_BOARD(board) (board->flags & SI_ISA_BOARD)
-#define IS_SI1_BOARD(board) (board->flags & SI1_ISA_BOARD)
-
-#define IS_EISA_BOARD(board) (board->flags & SI_EISA_BOARD)
-
-#define IS_CF_BOARD(board) (board->flags & (SX_CFISA_BOARD | SX_CFPCI_BOARD))
-
-/* The SI processor clock is required to calculate the cc_int_count register
- value for the SI cards. */
-#define SI_PROCESSOR_CLOCK 25000000
-
-
-/* port flags */
-/* Make sure these don't clash with gs flags or async flags */
-#define SX_RX_THROTTLE 0x0000001
-
-
-
-#define SX_PORT_TRANSMIT_LOCK 0
-#define SX_BOARD_INTR_LOCK 0
-
-
-
-/* Debug flags. Add these together to get more debug info. */
-
-#define SX_DEBUG_OPEN 0x00000001
-#define SX_DEBUG_SETTING 0x00000002
-#define SX_DEBUG_FLOW 0x00000004
-#define SX_DEBUG_MODEMSIGNALS 0x00000008
-#define SX_DEBUG_TERMIOS 0x00000010
-#define SX_DEBUG_TRANSMIT 0x00000020
-#define SX_DEBUG_RECEIVE 0x00000040
-#define SX_DEBUG_INTERRUPTS 0x00000080
-#define SX_DEBUG_PROBE 0x00000100
-#define SX_DEBUG_INIT 0x00000200
-#define SX_DEBUG_CLEANUP 0x00000400
-#define SX_DEBUG_CLOSE 0x00000800
-#define SX_DEBUG_FIRMWARE 0x00001000
-#define SX_DEBUG_MEMTEST 0x00002000
-
-#define SX_DEBUG_ALL 0xffffffff
-
-
-#define O_OTHER(tty) \
- ((O_OLCUC(tty)) ||\
- (O_ONLCR(tty)) ||\
- (O_OCRNL(tty)) ||\
- (O_ONOCR(tty)) ||\
- (O_ONLRET(tty)) ||\
- (O_OFILL(tty)) ||\
- (O_OFDEL(tty)) ||\
- (O_NLDLY(tty)) ||\
- (O_CRDLY(tty)) ||\
- (O_TABDLY(tty)) ||\
- (O_BSDLY(tty)) ||\
- (O_VTDLY(tty)) ||\
- (O_FFDLY(tty)))
-
-/* Same for input. */
-#define I_OTHER(tty) \
- ((I_INLCR(tty)) ||\
- (I_IGNCR(tty)) ||\
- (I_ICRNL(tty)) ||\
- (I_IUCLC(tty)) ||\
- (L_ISIG(tty)))
-
-#define MOD_TA ( TA>>4)
-#define MOD_MTA (MTA_CD1400>>4)
-#define MOD_SXDC ( SXDC>>4)
-
-
-/* We copy the download code over to the card in chunks of ... bytes */
-#define SX_CHUNK_SIZE 128
-
-#endif /* __KERNEL__ */
-
-
-
-/* Specialix document 6210046-11 page 3 */
-#define SPX(X) (('S'<<24) | ('P' << 16) | (X))
-
-/* Specialix-Linux specific IOCTLS. */
-#define SPXL(X) (SPX(('L' << 8) | (X)))
-
-
-#define SXIO_SET_BOARD SPXL(0x01)
-#define SXIO_GET_TYPE SPXL(0x02)
-#define SXIO_DOWNLOAD SPXL(0x03)
-#define SXIO_INIT SPXL(0x04)
-#define SXIO_SETDEBUG SPXL(0x05)
-#define SXIO_GETDEBUG SPXL(0x06)
-#define SXIO_DO_RAMTEST SPXL(0x07)
-#define SXIO_SETGSDEBUG SPXL(0x08)
-#define SXIO_GETGSDEBUG SPXL(0x09)
-#define SXIO_GETNPORTS SPXL(0x0a)
-
-
-#ifndef SXCTL_MISC_MINOR
-/* Allow others to gather this into "major.h" or something like that */
-#define SXCTL_MISC_MINOR 167
-#endif
-
-#ifndef SX_NORMAL_MAJOR
-/* This allows overriding on the compiler commandline, or in a "major.h"
- include or something like that */
-#define SX_NORMAL_MAJOR 32
-#define SX_CALLOUT_MAJOR 33
-#endif
-
-
-#define SX_TYPE_SX 0x01
-#define SX_TYPE_SI 0x02
-#define SX_TYPE_CF 0x03
-
-
-#define WINDOW_LEN(board) (IS_CF_BOARD(board)?0x20000:SX_WINDOW_LEN)
-/* Need a #define for ^^^^^^^ !!! */
-
+++ /dev/null
-/************************************************************************/
-/* */
-/* Title : SX/SI/XIO Board Hardware Definitions */
-/* */
-/* Author : N.P.Vassallo */
-/* */
-/* Creation : 16th March 1998 */
-/* */
-/* Version : 3.0.0 */
-/* */
-/* Copyright : (c) Specialix International Ltd. 1998 */
-/* */
-/* Description : Prototypes, structures and definitions */
-/* describing the SX/SI/XIO board hardware */
-/* */
-/************************************************************************/
-
-/* History...
-
-3.0.0 16/03/98 NPV Creation.
-
-*/
-
-#ifndef _sxboards_h /* If SXBOARDS.H not already defined */
-#define _sxboards_h 1
-
-/*****************************************************************************
-******************************* ******************************
-******************************* Board Types ******************************
-******************************* ******************************
-*****************************************************************************/
-
-/* BUS types... */
-#define BUS_ISA 0
-#define BUS_MCA 1
-#define BUS_EISA 2
-#define BUS_PCI 3
-
-/* Board phases... */
-#define SI1_Z280 1
-#define SI2_Z280 2
-#define SI3_T225 3
-
-/* Board types... */
-#define CARD_TYPE(bus,phase) (bus<<4|phase)
-#define CARD_BUS(type) ((type>>4)&0xF)
-#define CARD_PHASE(type) (type&0xF)
-
-#define TYPE_SI1_ISA CARD_TYPE(BUS_ISA,SI1_Z280)
-#define TYPE_SI2_ISA CARD_TYPE(BUS_ISA,SI2_Z280)
-#define TYPE_SI2_EISA CARD_TYPE(BUS_EISA,SI2_Z280)
-#define TYPE_SI2_PCI CARD_TYPE(BUS_PCI,SI2_Z280)
-
-#define TYPE_SX_ISA CARD_TYPE(BUS_ISA,SI3_T225)
-#define TYPE_SX_PCI CARD_TYPE(BUS_PCI,SI3_T225)
-/*****************************************************************************
-****************************** ******************************
-****************************** Phase 1 Z280 ******************************
-****************************** ******************************
-*****************************************************************************/
-
-/* ISA board details... */
-#define SI1_ISA_WINDOW_LEN 0x10000 /* 64 Kbyte shared memory window */
-//#define SI1_ISA_MEMORY_LEN 0x8000 /* Usable memory - unused define*/
-//#define SI1_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */
-//#define SI1_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */
-//#define SI2_ISA_ADDR_STEP SI2_ISA_WINDOW_LEN/* ISA board address step */
-//#define SI2_ISA_IRQ_MASK 0x9800 /* IRQs 15,12,11 */
-
-/* ISA board, register definitions... */
-//#define SI2_ISA_ID_BASE 0x7FF8 /* READ: Board ID string */
-#define SI1_ISA_RESET 0x8000 /* WRITE: Host Reset */
-#define SI1_ISA_RESET_CLEAR 0xc000 /* WRITE: Host Reset clear*/
-#define SI1_ISA_WAIT 0x9000 /* WRITE: Host wait */
-#define SI1_ISA_WAIT_CLEAR 0xd000 /* WRITE: Host wait clear */
-#define SI1_ISA_INTCL 0xa000 /* WRITE: Host Reset */
-#define SI1_ISA_INTCL_CLEAR 0xe000 /* WRITE: Host Reset */
-
-
-/*****************************************************************************
-****************************** ******************************
-****************************** Phase 2 Z280 ******************************
-****************************** ******************************
-*****************************************************************************/
-
-/* ISA board details... */
-#define SI2_ISA_WINDOW_LEN 0x8000 /* 32 Kbyte shared memory window */
-#define SI2_ISA_MEMORY_LEN 0x7FF8 /* Usable memory */
-#define SI2_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */
-#define SI2_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */
-#define SI2_ISA_ADDR_STEP SI2_ISA_WINDOW_LEN/* ISA board address step */
-#define SI2_ISA_IRQ_MASK 0x9800 /* IRQs 15,12,11 */
-
-/* ISA board, register definitions... */
-#define SI2_ISA_ID_BASE 0x7FF8 /* READ: Board ID string */
-#define SI2_ISA_RESET SI2_ISA_ID_BASE /* WRITE: Host Reset */
-#define SI2_ISA_IRQ11 (SI2_ISA_ID_BASE+1) /* WRITE: Set IRQ11 */
-#define SI2_ISA_IRQ12 (SI2_ISA_ID_BASE+2) /* WRITE: Set IRQ12 */
-#define SI2_ISA_IRQ15 (SI2_ISA_ID_BASE+3) /* WRITE: Set IRQ15 */
-#define SI2_ISA_IRQSET (SI2_ISA_ID_BASE+4) /* WRITE: Set Host Interrupt */
-#define SI2_ISA_INTCLEAR (SI2_ISA_ID_BASE+5) /* WRITE: Enable Host Interrupt */
-
-#define SI2_ISA_IRQ11_SET 0x10
-#define SI2_ISA_IRQ11_CLEAR 0x00
-#define SI2_ISA_IRQ12_SET 0x10
-#define SI2_ISA_IRQ12_CLEAR 0x00
-#define SI2_ISA_IRQ15_SET 0x10
-#define SI2_ISA_IRQ15_CLEAR 0x00
-#define SI2_ISA_INTCLEAR_SET 0x10
-#define SI2_ISA_INTCLEAR_CLEAR 0x00
-#define SI2_ISA_IRQSET_CLEAR 0x10
-#define SI2_ISA_IRQSET_SET 0x00
-#define SI2_ISA_RESET_SET 0x00
-#define SI2_ISA_RESET_CLEAR 0x10
-
-/* PCI board details... */
-#define SI2_PCI_WINDOW_LEN 0x100000 /* 1 Mbyte memory window */
-
-/* PCI board register definitions... */
-#define SI2_PCI_SET_IRQ 0x40001 /* Set Host Interrupt */
-#define SI2_PCI_RESET 0xC0001 /* Host Reset */
-
-/*****************************************************************************
-****************************** ******************************
-****************************** Phase 3 T225 ******************************
-****************************** ******************************
-*****************************************************************************/
-
-/* General board details... */
-#define SX_WINDOW_LEN 64*1024 /* 64 Kbyte memory window */
-
-/* ISA board details... */
-#define SX_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */
-#define SX_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */
-#define SX_ISA_ADDR_STEP SX_WINDOW_LEN /* ISA board address step */
-#define SX_ISA_IRQ_MASK 0x9E00 /* IRQs 15,12,11,10,9 */
-
-/* Hardware register definitions... */
-#define SX_EVENT_STATUS 0x7800 /* READ: T225 Event Status */
-#define SX_EVENT_STROBE 0x7800 /* WRITE: T225 Event Strobe */
-#define SX_EVENT_ENABLE 0x7880 /* WRITE: T225 Event Enable */
-#define SX_VPD_ROM 0x7C00 /* READ: Vital Product Data ROM */
-#define SX_CONFIG 0x7C00 /* WRITE: Host Configuration Register */
-#define SX_IRQ_STATUS 0x7C80 /* READ: Host Interrupt Status */
-#define SX_SET_IRQ 0x7C80 /* WRITE: Set Host Interrupt */
-#define SX_RESET_STATUS 0x7D00 /* READ: Host Reset Status */
-#define SX_RESET 0x7D00 /* WRITE: Host Reset */
-#define SX_RESET_IRQ 0x7D80 /* WRITE: Reset Host Interrupt */
-
-/* SX_VPD_ROM definitions... */
-#define SX_VPD_SLX_ID1 0x00
-#define SX_VPD_SLX_ID2 0x01
-#define SX_VPD_HW_REV 0x02
-#define SX_VPD_HW_ASSEM 0x03
-#define SX_VPD_UNIQUEID4 0x04
-#define SX_VPD_UNIQUEID3 0x05
-#define SX_VPD_UNIQUEID2 0x06
-#define SX_VPD_UNIQUEID1 0x07
-#define SX_VPD_MANU_YEAR 0x08
-#define SX_VPD_MANU_WEEK 0x09
-#define SX_VPD_IDENT 0x10
-#define SX_VPD_IDENT_STRING "JET HOST BY KEV#"
-
-/* SX unique identifiers... */
-#define SX_UNIQUEID_MASK 0xF0
-#define SX_ISA_UNIQUEID1 0x20
-#define SX_PCI_UNIQUEID1 0x50
-
-/* SX_CONFIG definitions... */
-#define SX_CONF_BUSEN 0x02 /* Enable T225 memory and I/O */
-#define SX_CONF_HOSTIRQ 0x04 /* Enable board to host interrupt */
-
-/* SX bootstrap... */
-#define SX_BOOTSTRAP "\x28\x20\x21\x02\x60\x0a"
-#define SX_BOOTSTRAP_SIZE 6
-#define SX_BOOTSTRAP_ADDR (0x8000-SX_BOOTSTRAP_SIZE)
-
-/*****************************************************************************
-********************************** **********************************
-********************************** EISA **********************************
-********************************** **********************************
-*****************************************************************************/
-
-#define SI2_EISA_OFF 0x42
-#define SI2_EISA_VAL 0x01
-#define SI2_EISA_WINDOW_LEN 0x10000
-
-/*****************************************************************************
-*********************************** **********************************
-*********************************** PCI **********************************
-*********************************** **********************************
-*****************************************************************************/
-
-/* General definitions... */
-
-#define SPX_VENDOR_ID 0x11CB /* Assigned by the PCI SIG */
-#define SPX_DEVICE_ID 0x4000 /* SI/XIO boards */
-#define SPX_PLXDEVICE_ID 0x2000 /* SX boards */
-
-#define SPX_SUB_VENDOR_ID SPX_VENDOR_ID /* Same as vendor id */
-#define SI2_SUB_SYS_ID 0x400 /* Phase 2 (Z280) board */
-#define SX_SUB_SYS_ID 0x200 /* Phase 3 (t225) board */
-
-#endif /*_sxboards_h */
-
-/* End of SXBOARDS.H */
+++ /dev/null
-/************************************************************************/
-/* */
-/* Title : SX Shared Memory Window Structure */
-/* */
-/* Author : N.P.Vassallo */
-/* */
-/* Creation : 16th March 1998 */
-/* */
-/* Version : 3.0.0 */
-/* */
-/* Copyright : (c) Specialix International Ltd. 1998 */
-/* */
-/* Description : Prototypes, structures and definitions */
-/* describing the SX/SI/XIO cards shared */
-/* memory window structure: */
-/* SXCARD */
-/* SXMODULE */
-/* SXCHANNEL */
-/* */
-/************************************************************************/
-
-/* History...
-
-3.0.0 16/03/98 NPV Creation. (based on STRUCT.H)
-
-*/
-
-#ifndef _sxwindow_h /* If SXWINDOW.H not already defined */
-#define _sxwindow_h 1
-
-/*****************************************************************************
-*************************** ***************************
-*************************** Common Definitions ***************************
-*************************** ***************************
-*****************************************************************************/
-
-typedef struct _SXCARD *PSXCARD; /* SXCARD structure pointer */
-typedef struct _SXMODULE *PMOD; /* SXMODULE structure pointer */
-typedef struct _SXCHANNEL *PCHAN; /* SXCHANNEL structure pointer */
-
-/*****************************************************************************
-********************************* *********************************
-********************************* SXCARD *********************************
-********************************* *********************************
-*****************************************************************************/
-
-typedef struct _SXCARD
-{
- BYTE cc_init_status; /* 0x00 Initialisation status */
- BYTE cc_mem_size; /* 0x01 Size of memory on card */
- WORD cc_int_count; /* 0x02 Interrupt count */
- WORD cc_revision; /* 0x04 Download code revision */
- BYTE cc_isr_count; /* 0x06 Count when ISR is run */
- BYTE cc_main_count; /* 0x07 Count when main loop is run */
- WORD cc_int_pending; /* 0x08 Interrupt pending */
- WORD cc_poll_count; /* 0x0A Count when poll is run */
- BYTE cc_int_set_count; /* 0x0C Count when host interrupt is set */
- BYTE cc_rfu[0x80 - 0x0D]; /* 0x0D Pad structure to 128 bytes (0x80) */
-
-} SXCARD;
-
-/* SXCARD.cc_init_status definitions... */
-#define ADAPTERS_FOUND (BYTE)0x01
-#define NO_ADAPTERS_FOUND (BYTE)0xFF
-
-/* SXCARD.cc_mem_size definitions... */
-#define SX_MEMORY_SIZE (BYTE)0x40
-
-/* SXCARD.cc_int_count definitions... */
-#define INT_COUNT_DEFAULT 100 /* Hz */
-
-/*****************************************************************************
-******************************** ********************************
-******************************** SXMODULE ********************************
-******************************** ********************************
-*****************************************************************************/
-
-#define TOP_POINTER(a) ((a)|0x8000) /* Sets top bit of word */
-#define UNTOP_POINTER(a) ((a)&~0x8000) /* Clears top bit of word */
-
-typedef struct _SXMODULE
-{
- WORD mc_next; /* 0x00 Next module "pointer" (ORed with 0x8000) */
- BYTE mc_type; /* 0x02 Type of TA in terms of number of channels */
- BYTE mc_mod_no; /* 0x03 Module number on SI bus cable (0 closest to card) */
- BYTE mc_dtr; /* 0x04 Private DTR copy (TA only) */
- BYTE mc_rfu1; /* 0x05 Reserved */
- WORD mc_uart; /* 0x06 UART base address for this module */
- BYTE mc_chip; /* 0x08 Chip type / number of ports */
- BYTE mc_current_uart; /* 0x09 Current uart selected for this module */
-#ifdef DOWNLOAD
- PCHAN mc_chan_pointer[8]; /* 0x0A Pointer to each channel structure */
-#else
- WORD mc_chan_pointer[8]; /* 0x0A Define as WORD if not compiling into download */
-#endif
- WORD mc_rfu2; /* 0x1A Reserved */
- BYTE mc_opens1; /* 0x1C Number of open ports on first four ports on MTA/SXDC */
- BYTE mc_opens2; /* 0x1D Number of open ports on second four ports on MTA/SXDC */
- BYTE mc_mods; /* 0x1E Types of connector module attached to MTA/SXDC */
- BYTE mc_rev1; /* 0x1F Revision of first CD1400 on MTA/SXDC */
- BYTE mc_rev2; /* 0x20 Revision of second CD1400 on MTA/SXDC */
- BYTE mc_mtaasic_rev; /* 0x21 Revision of MTA ASIC 1..4 -> A, B, C, D */
- BYTE mc_rfu3[0x100 - 0x22]; /* 0x22 Pad structure to 256 bytes (0x100) */
-
-} SXMODULE;
-
-/* SXMODULE.mc_type definitions... */
-#define FOUR_PORTS (BYTE)4
-#define EIGHT_PORTS (BYTE)8
-
-/* SXMODULE.mc_chip definitions... */
-#define CHIP_MASK 0xF0
-#define TA (BYTE)0
-#define TA4 (TA | FOUR_PORTS)
-#define TA8 (TA | EIGHT_PORTS)
-#define TA4_ASIC (BYTE)0x0A
-#define TA8_ASIC (BYTE)0x0B
-#define MTA_CD1400 (BYTE)0x28
-#define SXDC (BYTE)0x48
-
-/* SXMODULE.mc_mods definitions... */
-#define MOD_RS232DB25 0x00 /* RS232 DB25 (socket/plug) */
-#define MOD_RS232RJ45 0x01 /* RS232 RJ45 (shielded/opto-isolated) */
-#define MOD_RESERVED_2 0x02 /* Reserved (RS485) */
-#define MOD_RS422DB25 0x03 /* RS422 DB25 Socket */
-#define MOD_RESERVED_4 0x04 /* Reserved */
-#define MOD_PARALLEL 0x05 /* Parallel */
-#define MOD_RESERVED_6 0x06 /* Reserved (RS423) */
-#define MOD_RESERVED_7 0x07 /* Reserved */
-#define MOD_2_RS232DB25 0x08 /* Rev 2.0 RS232 DB25 (socket/plug) */
-#define MOD_2_RS232RJ45 0x09 /* Rev 2.0 RS232 RJ45 */
-#define MOD_RESERVED_A 0x0A /* Rev 2.0 Reserved */
-#define MOD_2_RS422DB25 0x0B /* Rev 2.0 RS422 DB25 */
-#define MOD_RESERVED_C 0x0C /* Rev 2.0 Reserved */
-#define MOD_2_PARALLEL 0x0D /* Rev 2.0 Parallel */
-#define MOD_RESERVED_E 0x0E /* Rev 2.0 Reserved */
-#define MOD_BLANK 0x0F /* Blank Panel */
-
-/*****************************************************************************
-******************************** *******************************
-******************************** SXCHANNEL *******************************
-******************************** *******************************
-*****************************************************************************/
-
-#define TX_BUFF_OFFSET 0x60 /* Transmit buffer offset in channel structure */
-#define BUFF_POINTER(a) (((a)+TX_BUFF_OFFSET)|0x8000)
-#define UNBUFF_POINTER(a) (jet_channel*)(((a)&~0x8000)-TX_BUFF_OFFSET)
-#define BUFFER_SIZE 256
-#define HIGH_WATER ((BUFFER_SIZE / 4) * 3)
-#define LOW_WATER (BUFFER_SIZE / 4)
-
-typedef struct _SXCHANNEL
-{
- WORD next_item; /* 0x00 Offset from window base of next channels hi_txbuf (ORred with 0x8000) */
- WORD addr_uart; /* 0x02 INTERNAL pointer to uart address. Includes FASTPATH bit */
- WORD module; /* 0x04 Offset from window base of parent SXMODULE structure */
- BYTE type; /* 0x06 Chip type / number of ports (copy of mc_chip) */
- BYTE chan_number; /* 0x07 Channel number on the TA/MTA/SXDC */
- WORD xc_status; /* 0x08 Flow control and I/O status */
- BYTE hi_rxipos; /* 0x0A Receive buffer input index */
- BYTE hi_rxopos; /* 0x0B Receive buffer output index */
- BYTE hi_txopos; /* 0x0C Transmit buffer output index */
- BYTE hi_txipos; /* 0x0D Transmit buffer input index */
- BYTE hi_hstat; /* 0x0E Command register */
- BYTE dtr_bit; /* 0x0F INTERNAL DTR control byte (TA only) */
- BYTE txon; /* 0x10 INTERNAL copy of hi_txon */
- BYTE txoff; /* 0x11 INTERNAL copy of hi_txoff */
- BYTE rxon; /* 0x12 INTERNAL copy of hi_rxon */
- BYTE rxoff; /* 0x13 INTERNAL copy of hi_rxoff */
- BYTE hi_mr1; /* 0x14 Mode Register 1 (databits,parity,RTS rx flow)*/
- BYTE hi_mr2; /* 0x15 Mode Register 2 (stopbits,local,CTS tx flow)*/
- BYTE hi_csr; /* 0x16 Clock Select Register (baud rate) */
- BYTE hi_op; /* 0x17 Modem Output Signal */
- BYTE hi_ip; /* 0x18 Modem Input Signal */
- BYTE hi_state; /* 0x19 Channel status */
- BYTE hi_prtcl; /* 0x1A Channel protocol (flow control) */
- BYTE hi_txon; /* 0x1B Transmit XON character */
- BYTE hi_txoff; /* 0x1C Transmit XOFF character */
- BYTE hi_rxon; /* 0x1D Receive XON character */
- BYTE hi_rxoff; /* 0x1E Receive XOFF character */
- BYTE close_prev; /* 0x1F INTERNAL channel previously closed flag */
- BYTE hi_break; /* 0x20 Break and error control */
- BYTE break_state; /* 0x21 INTERNAL copy of hi_break */
- BYTE hi_mask; /* 0x22 Mask for received data */
- BYTE mask; /* 0x23 INTERNAL copy of hi_mask */
- BYTE mod_type; /* 0x24 MTA/SXDC hardware module type */
- BYTE ccr_state; /* 0x25 INTERNAL MTA/SXDC state of CCR register */
- BYTE ip_mask; /* 0x26 Input handshake mask */
- BYTE hi_parallel; /* 0x27 Parallel port flag */
- BYTE par_error; /* 0x28 Error code for parallel loopback test */
- BYTE any_sent; /* 0x29 INTERNAL data sent flag */
- BYTE asic_txfifo_size; /* 0x2A INTERNAL SXDC transmit FIFO size */
- BYTE rfu1[2]; /* 0x2B Reserved */
- BYTE csr; /* 0x2D INTERNAL copy of hi_csr */
-#ifdef DOWNLOAD
- PCHAN nextp; /* 0x2E Offset from window base of next channel structure */
-#else
- WORD nextp; /* 0x2E Define as WORD if not compiling into download */
-#endif
- BYTE prtcl; /* 0x30 INTERNAL copy of hi_prtcl */
- BYTE mr1; /* 0x31 INTERNAL copy of hi_mr1 */
- BYTE mr2; /* 0x32 INTERNAL copy of hi_mr2 */
- BYTE hi_txbaud; /* 0x33 Extended transmit baud rate (SXDC only if((hi_csr&0x0F)==0x0F) */
- BYTE hi_rxbaud; /* 0x34 Extended receive baud rate (SXDC only if((hi_csr&0xF0)==0xF0) */
- BYTE txbreak_state; /* 0x35 INTERNAL MTA/SXDC transmit break state */
- BYTE txbaud; /* 0x36 INTERNAL copy of hi_txbaud */
- BYTE rxbaud; /* 0x37 INTERNAL copy of hi_rxbaud */
- WORD err_framing; /* 0x38 Count of receive framing errors */
- WORD err_parity; /* 0x3A Count of receive parity errors */
- WORD err_overrun; /* 0x3C Count of receive overrun errors */
- WORD err_overflow; /* 0x3E Count of receive buffer overflow errors */
- BYTE rfu2[TX_BUFF_OFFSET - 0x40]; /* 0x40 Reserved until hi_txbuf */
- BYTE hi_txbuf[BUFFER_SIZE]; /* 0x060 Transmit buffer */
- BYTE hi_rxbuf[BUFFER_SIZE]; /* 0x160 Receive buffer */
- BYTE rfu3[0x300 - 0x260]; /* 0x260 Reserved until 768 bytes (0x300) */
-
-} SXCHANNEL;
-
-/* SXCHANNEL.addr_uart definitions... */
-#define FASTPATH 0x1000 /* Set to indicate fast rx/tx processing (TA only) */
-
-/* SXCHANNEL.xc_status definitions... */
-#define X_TANY 0x0001 /* XON is any character (TA only) */
-#define X_TION 0x0001 /* Tx interrupts on (MTA only) */
-#define X_TXEN 0x0002 /* Tx XON/XOFF enabled (TA only) */
-#define X_RTSEN 0x0002 /* RTS FLOW enabled (MTA only) */
-#define X_TXRC 0x0004 /* XOFF received (TA only) */
-#define X_RTSLOW 0x0004 /* RTS dropped (MTA only) */
-#define X_RXEN 0x0008 /* Rx XON/XOFF enabled */
-#define X_ANYXO 0x0010 /* XOFF pending/sent or RTS dropped */
-#define X_RXSE 0x0020 /* Rx XOFF sent */
-#define X_NPEND 0x0040 /* Rx XON pending or XOFF pending */
-#define X_FPEND 0x0080 /* Rx XOFF pending */
-#define C_CRSE 0x0100 /* Carriage return sent (TA only) */
-#define C_TEMR 0x0100 /* Tx empty requested (MTA only) */
-#define C_TEMA 0x0200 /* Tx empty acked (MTA only) */
-#define C_ANYP 0x0200 /* Any protocol bar tx XON/XOFF (TA only) */
-#define C_EN 0x0400 /* Cooking enabled (on MTA means port is also || */
-#define C_HIGH 0x0800 /* Buffer previously hit high water */
-#define C_CTSEN 0x1000 /* CTS automatic flow-control enabled */
-#define C_DCDEN 0x2000 /* DCD/DTR checking enabled */
-#define C_BREAK 0x4000 /* Break detected */
-#define C_RTSEN 0x8000 /* RTS automatic flow control enabled (MTA only) */
-#define C_PARITY 0x8000 /* Parity checking enabled (TA only) */
-
-/* SXCHANNEL.hi_hstat definitions... */
-#define HS_IDLE_OPEN 0x00 /* Channel open state */
-#define HS_LOPEN 0x02 /* Local open command (no modem monitoring) */
-#define HS_MOPEN 0x04 /* Modem open command (wait for DCD signal) */
-#define HS_IDLE_MPEND 0x06 /* Waiting for DCD signal state */
-#define HS_CONFIG 0x08 /* Configuration command */
-#define HS_CLOSE 0x0A /* Close command */
-#define HS_START 0x0C /* Start transmit break command */
-#define HS_STOP 0x0E /* Stop transmit break command */
-#define HS_IDLE_CLOSED 0x10 /* Closed channel state */
-#define HS_IDLE_BREAK 0x12 /* Transmit break state */
-#define HS_FORCE_CLOSED 0x14 /* Force close command */
-#define HS_RESUME 0x16 /* Clear pending XOFF command */
-#define HS_WFLUSH 0x18 /* Flush transmit buffer command */
-#define HS_RFLUSH 0x1A /* Flush receive buffer command */
-#define HS_SUSPEND 0x1C /* Suspend output command (like XOFF received) */
-#define PARALLEL 0x1E /* Parallel port loopback test command (Diagnostics Only) */
-#define ENABLE_RX_INTS 0x20 /* Enable receive interrupts command (Diagnostics Only) */
-#define ENABLE_TX_INTS 0x22 /* Enable transmit interrupts command (Diagnostics Only) */
-#define ENABLE_MDM_INTS 0x24 /* Enable modem interrupts command (Diagnostics Only) */
-#define DISABLE_INTS 0x26 /* Disable interrupts command (Diagnostics Only) */
-
-/* SXCHANNEL.hi_mr1 definitions... */
-#define MR1_BITS 0x03 /* Data bits mask */
-#define MR1_5_BITS 0x00 /* 5 data bits */
-#define MR1_6_BITS 0x01 /* 6 data bits */
-#define MR1_7_BITS 0x02 /* 7 data bits */
-#define MR1_8_BITS 0x03 /* 8 data bits */
-#define MR1_PARITY 0x1C /* Parity mask */
-#define MR1_ODD 0x04 /* Odd parity */
-#define MR1_EVEN 0x00 /* Even parity */
-#define MR1_WITH 0x00 /* Parity enabled */
-#define MR1_FORCE 0x08 /* Force parity */
-#define MR1_NONE 0x10 /* No parity */
-#define MR1_NOPARITY MR1_NONE /* No parity */
-#define MR1_ODDPARITY (MR1_WITH|MR1_ODD) /* Odd parity */
-#define MR1_EVENPARITY (MR1_WITH|MR1_EVEN) /* Even parity */
-#define MR1_MARKPARITY (MR1_FORCE|MR1_ODD) /* Mark parity */
-#define MR1_SPACEPARITY (MR1_FORCE|MR1_EVEN) /* Space parity */
-#define MR1_RTS_RXFLOW 0x80 /* RTS receive flow control */
-
-/* SXCHANNEL.hi_mr2 definitions... */
-#define MR2_STOP 0x0F /* Stop bits mask */
-#define MR2_1_STOP 0x07 /* 1 stop bit */
-#define MR2_2_STOP 0x0F /* 2 stop bits */
-#define MR2_CTS_TXFLOW 0x10 /* CTS transmit flow control */
-#define MR2_RTS_TOGGLE 0x20 /* RTS toggle on transmit */
-#define MR2_NORMAL 0x00 /* Normal mode */
-#define MR2_AUTO 0x40 /* Auto-echo mode (TA only) */
-#define MR2_LOCAL 0x80 /* Local echo mode */
-#define MR2_REMOTE 0xC0 /* Remote echo mode (TA only) */
-
-/* SXCHANNEL.hi_csr definitions... */
-#define CSR_75 0x0 /* 75 baud */
-#define CSR_110 0x1 /* 110 baud (TA), 115200 (MTA/SXDC) */
-#define CSR_38400 0x2 /* 38400 baud */
-#define CSR_150 0x3 /* 150 baud */
-#define CSR_300 0x4 /* 300 baud */
-#define CSR_600 0x5 /* 600 baud */
-#define CSR_1200 0x6 /* 1200 baud */
-#define CSR_2000 0x7 /* 2000 baud */
-#define CSR_2400 0x8 /* 2400 baud */
-#define CSR_4800 0x9 /* 4800 baud */
-#define CSR_1800 0xA /* 1800 baud */
-#define CSR_9600 0xB /* 9600 baud */
-#define CSR_19200 0xC /* 19200 baud */
-#define CSR_57600 0xD /* 57600 baud */
-#define CSR_EXTBAUD 0xF /* Extended baud rate (hi_txbaud/hi_rxbaud) */
-
-/* SXCHANNEL.hi_op definitions... */
-#define OP_RTS 0x01 /* RTS modem output signal */
-#define OP_DTR 0x02 /* DTR modem output signal */
-
-/* SXCHANNEL.hi_ip definitions... */
-#define IP_CTS 0x02 /* CTS modem input signal */
-#define IP_DCD 0x04 /* DCD modem input signal */
-#define IP_DSR 0x20 /* DTR modem input signal */
-#define IP_RI 0x40 /* RI modem input signal */
-
-/* SXCHANNEL.hi_state definitions... */
-#define ST_BREAK 0x01 /* Break received (clear with config) */
-#define ST_DCD 0x02 /* DCD signal changed state */
-
-/* SXCHANNEL.hi_prtcl definitions... */
-#define SP_TANY 0x01 /* Transmit XON/XANY (if SP_TXEN enabled) */
-#define SP_TXEN 0x02 /* Transmit XON/XOFF flow control */
-#define SP_CEN 0x04 /* Cooking enabled */
-#define SP_RXEN 0x08 /* Rx XON/XOFF enabled */
-#define SP_DCEN 0x20 /* DCD / DTR check */
-#define SP_DTR_RXFLOW 0x40 /* DTR receive flow control */
-#define SP_PAEN 0x80 /* Parity checking enabled */
-
-/* SXCHANNEL.hi_break definitions... */
-#define BR_IGN 0x01 /* Ignore any received breaks */
-#define BR_INT 0x02 /* Interrupt on received break */
-#define BR_PARMRK 0x04 /* Enable parmrk parity error processing */
-#define BR_PARIGN 0x08 /* Ignore chars with parity errors */
-#define BR_ERRINT 0x80 /* Treat parity/framing/overrun errors as exceptions */
-
-/* SXCHANNEL.par_error definitions.. */
-#define DIAG_IRQ_RX 0x01 /* Indicate serial receive interrupt (diags only) */
-#define DIAG_IRQ_TX 0x02 /* Indicate serial transmit interrupt (diags only) */
-#define DIAG_IRQ_MD 0x04 /* Indicate serial modem interrupt (diags only) */
-
-/* SXCHANNEL.hi_txbaud/hi_rxbaud definitions... (SXDC only) */
-#define BAUD_75 0x00 /* 75 baud */
-#define BAUD_115200 0x01 /* 115200 baud */
-#define BAUD_38400 0x02 /* 38400 baud */
-#define BAUD_150 0x03 /* 150 baud */
-#define BAUD_300 0x04 /* 300 baud */
-#define BAUD_600 0x05 /* 600 baud */
-#define BAUD_1200 0x06 /* 1200 baud */
-#define BAUD_2000 0x07 /* 2000 baud */
-#define BAUD_2400 0x08 /* 2400 baud */
-#define BAUD_4800 0x09 /* 4800 baud */
-#define BAUD_1800 0x0A /* 1800 baud */
-#define BAUD_9600 0x0B /* 9600 baud */
-#define BAUD_19200 0x0C /* 19200 baud */
-#define BAUD_57600 0x0D /* 57600 baud */
-#define BAUD_230400 0x0E /* 230400 baud */
-#define BAUD_460800 0x0F /* 460800 baud */
-#define BAUD_921600 0x10 /* 921600 baud */
-#define BAUD_50 0x11 /* 50 baud */
-#define BAUD_110 0x12 /* 110 baud */
-#define BAUD_134_5 0x13 /* 134.5 baud */
-#define BAUD_200 0x14 /* 200 baud */
-#define BAUD_7200 0x15 /* 7200 baud */
-#define BAUD_56000 0x16 /* 56000 baud */
-#define BAUD_64000 0x17 /* 64000 baud */
-#define BAUD_76800 0x18 /* 76800 baud */
-#define BAUD_128000 0x19 /* 128000 baud */
-#define BAUD_150000 0x1A /* 150000 baud */
-#define BAUD_14400 0x1B /* 14400 baud */
-#define BAUD_256000 0x1C /* 256000 baud */
-#define BAUD_28800 0x1D /* 28800 baud */
-
-/* SXCHANNEL.txbreak_state definiions... */
-#define TXBREAK_OFF 0 /* Not sending break */
-#define TXBREAK_START 1 /* Begin sending break */
-#define TXBREAK_START1 2 /* Begin sending break, part 1 */
-#define TXBREAK_ON 3 /* Sending break */
-#define TXBREAK_STOP 4 /* Stop sending break */
-#define TXBREAK_STOP1 5 /* Stop sending break, part 1 */
-
-#endif /* _sxwindow_h */
-
-/* End of SXWINDOW.H */
-
+++ /dev/null
-/*
- * drivers/char/vme_scc.c: MVME147, MVME162, BVME6000 SCC serial ports
- * implementation.
- * Copyright 1999 Richard Hirst <richard@sleepie.demon.co.uk>
- *
- * Based on atari_SCC.c which was
- * Copyright 1994-95 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
- * Partially based on PC-Linux serial.c by Linus Torvalds and Theodore Ts'o
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kdev_t.h>
-#include <asm/io.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/mm.h>
-#include <linux/serial.h>
-#include <linux/fcntl.h>
-#include <linux/major.h>
-#include <linux/delay.h>
-#include <linux/miscdevice.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <asm/setup.h>
-#include <asm/bootinfo.h>
-
-#ifdef CONFIG_MVME147_SCC
-#include <asm/mvme147hw.h>
-#endif
-#ifdef CONFIG_MVME162_SCC
-#include <asm/mvme16xhw.h>
-#endif
-#ifdef CONFIG_BVME6000_SCC
-#include <asm/bvme6000hw.h>
-#endif
-
-#include <linux/generic_serial.h>
-#include "scc.h"
-
-
-#define CHANNEL_A 0
-#define CHANNEL_B 1
-
-#define SCC_MINOR_BASE 64
-
-/* Shadows for all SCC write registers */
-static unsigned char scc_shadow[2][16];
-
-/* Location to access for SCC register access delay */
-static volatile unsigned char *scc_del = NULL;
-
-/* To keep track of STATUS_REG state for detection of Ext/Status int source */
-static unsigned char scc_last_status_reg[2];
-
-/***************************** Prototypes *****************************/
-
-/* Function prototypes */
-static void scc_disable_tx_interrupts(void * ptr);
-static void scc_enable_tx_interrupts(void * ptr);
-static void scc_disable_rx_interrupts(void * ptr);
-static void scc_enable_rx_interrupts(void * ptr);
-static int scc_carrier_raised(struct tty_port *port);
-static void scc_shutdown_port(void * ptr);
-static int scc_set_real_termios(void *ptr);
-static void scc_hungup(void *ptr);
-static void scc_close(void *ptr);
-static int scc_chars_in_buffer(void * ptr);
-static int scc_open(struct tty_struct * tty, struct file * filp);
-static int scc_ioctl(struct tty_struct * tty,
- unsigned int cmd, unsigned long arg);
-static void scc_throttle(struct tty_struct *tty);
-static void scc_unthrottle(struct tty_struct *tty);
-static irqreturn_t scc_tx_int(int irq, void *data);
-static irqreturn_t scc_rx_int(int irq, void *data);
-static irqreturn_t scc_stat_int(int irq, void *data);
-static irqreturn_t scc_spcond_int(int irq, void *data);
-static void scc_setsignals(struct scc_port *port, int dtr, int rts);
-static int scc_break_ctl(struct tty_struct *tty, int break_state);
-
-static struct tty_driver *scc_driver;
-
-static struct scc_port scc_ports[2];
-
-/*---------------------------------------------------------------------------
- * Interface from generic_serial.c back here
- *--------------------------------------------------------------------------*/
-
-static struct real_driver scc_real_driver = {
- scc_disable_tx_interrupts,
- scc_enable_tx_interrupts,
- scc_disable_rx_interrupts,
- scc_enable_rx_interrupts,
- scc_shutdown_port,
- scc_set_real_termios,
- scc_chars_in_buffer,
- scc_close,
- scc_hungup,
- NULL
-};
-
-
-static const struct tty_operations scc_ops = {
- .open = scc_open,
- .close = gs_close,
- .write = gs_write,
- .put_char = gs_put_char,
- .flush_chars = gs_flush_chars,
- .write_room = gs_write_room,
- .chars_in_buffer = gs_chars_in_buffer,
- .flush_buffer = gs_flush_buffer,
- .ioctl = scc_ioctl,
- .throttle = scc_throttle,
- .unthrottle = scc_unthrottle,
- .set_termios = gs_set_termios,
- .stop = gs_stop,
- .start = gs_start,
- .hangup = gs_hangup,
- .break_ctl = scc_break_ctl,
-};
-
-static const struct tty_port_operations scc_port_ops = {
- .carrier_raised = scc_carrier_raised,
-};
-
-/*----------------------------------------------------------------------------
- * vme_scc_init() and support functions
- *---------------------------------------------------------------------------*/
-
-static int __init scc_init_drivers(void)
-{
- int error;
-
- scc_driver = alloc_tty_driver(2);
- if (!scc_driver)
- return -ENOMEM;
- scc_driver->owner = THIS_MODULE;
- scc_driver->driver_name = "scc";
- scc_driver->name = "ttyS";
- scc_driver->major = TTY_MAJOR;
- scc_driver->minor_start = SCC_MINOR_BASE;
- scc_driver->type = TTY_DRIVER_TYPE_SERIAL;
- scc_driver->subtype = SERIAL_TYPE_NORMAL;
- scc_driver->init_termios = tty_std_termios;
- scc_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- scc_driver->init_termios.c_ispeed = 9600;
- scc_driver->init_termios.c_ospeed = 9600;
- scc_driver->flags = TTY_DRIVER_REAL_RAW;
- tty_set_operations(scc_driver, &scc_ops);
-
- if ((error = tty_register_driver(scc_driver))) {
- printk(KERN_ERR "scc: Couldn't register scc driver, error = %d\n",
- error);
- put_tty_driver(scc_driver);
- return 1;
- }
-
- return 0;
-}
-
-
-/* ports[] array is indexed by line no (i.e. [0] for ttyS0, [1] for ttyS1).
- */
-
-static void __init scc_init_portstructs(void)
-{
- struct scc_port *port;
- int i;
-
- for (i = 0; i < 2; i++) {
- port = scc_ports + i;
- tty_port_init(&port->gs.port);
- port->gs.port.ops = &scc_port_ops;
- port->gs.magic = SCC_MAGIC;
- port->gs.close_delay = HZ/2;
- port->gs.closing_wait = 30 * HZ;
- port->gs.rd = &scc_real_driver;
-#ifdef NEW_WRITE_LOCKING
- port->gs.port_write_mutex = MUTEX;
-#endif
- init_waitqueue_head(&port->gs.port.open_wait);
- init_waitqueue_head(&port->gs.port.close_wait);
- }
-}
-
-
-#ifdef CONFIG_MVME147_SCC
-static int __init mvme147_scc_init(void)
-{
- struct scc_port *port;
- int error;
-
- printk(KERN_INFO "SCC: MVME147 Serial Driver\n");
- /* Init channel A */
- port = &scc_ports[0];
- port->channel = CHANNEL_A;
- port->ctrlp = (volatile unsigned char *)M147_SCC_A_ADDR;
- port->datap = port->ctrlp + 1;
- port->port_a = &scc_ports[0];
- port->port_b = &scc_ports[1];
- error = request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
- "SCC-A TX", port);
- if (error)
- goto fail;
- error = request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
- "SCC-A status", port);
- if (error)
- goto fail_free_a_tx;
- error = request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
- "SCC-A RX", port);
- if (error)
- goto fail_free_a_stat;
- error = request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int,
- IRQF_DISABLED, "SCC-A special cond", port);
- if (error)
- goto fail_free_a_rx;
-
- {
- SCC_ACCESS_INIT(port);
-
- /* disable interrupts for this channel */
- SCCwrite(INT_AND_DMA_REG, 0);
- /* Set the interrupt vector */
- SCCwrite(INT_VECTOR_REG, MVME147_IRQ_SCC_BASE);
- /* Interrupt parameters: vector includes status, status low */
- SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
- SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
- }
-
- /* Init channel B */
- port = &scc_ports[1];
- port->channel = CHANNEL_B;
- port->ctrlp = (volatile unsigned char *)M147_SCC_B_ADDR;
- port->datap = port->ctrlp + 1;
- port->port_a = &scc_ports[0];
- port->port_b = &scc_ports[1];
- error = request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
- "SCC-B TX", port);
- if (error)
- goto fail_free_a_spcond;
- error = request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
- "SCC-B status", port);
- if (error)
- goto fail_free_b_tx;
- error = request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
- "SCC-B RX", port);
- if (error)
- goto fail_free_b_stat;
- error = request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int,
- IRQF_DISABLED, "SCC-B special cond", port);
- if (error)
- goto fail_free_b_rx;
-
- {
- SCC_ACCESS_INIT(port);
-
- /* disable interrupts for this channel */
- SCCwrite(INT_AND_DMA_REG, 0);
- }
-
- /* Ensure interrupts are enabled in the PCC chip */
- m147_pcc->serial_cntrl=PCC_LEVEL_SERIAL|PCC_INT_ENAB;
-
- /* Initialise the tty driver structures and register */
- scc_init_portstructs();
- scc_init_drivers();
-
- return 0;
-
-fail_free_b_rx:
- free_irq(MVME147_IRQ_SCCB_RX, port);
-fail_free_b_stat:
- free_irq(MVME147_IRQ_SCCB_STAT, port);
-fail_free_b_tx:
- free_irq(MVME147_IRQ_SCCB_TX, port);
-fail_free_a_spcond:
- free_irq(MVME147_IRQ_SCCA_SPCOND, port);
-fail_free_a_rx:
- free_irq(MVME147_IRQ_SCCA_RX, port);
-fail_free_a_stat:
- free_irq(MVME147_IRQ_SCCA_STAT, port);
-fail_free_a_tx:
- free_irq(MVME147_IRQ_SCCA_TX, port);
-fail:
- return error;
-}
-#endif
-
-
-#ifdef CONFIG_MVME162_SCC
-static int __init mvme162_scc_init(void)
-{
- struct scc_port *port;
- int error;
-
- if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA))
- return (-ENODEV);
-
- printk(KERN_INFO "SCC: MVME162 Serial Driver\n");
- /* Init channel A */
- port = &scc_ports[0];
- port->channel = CHANNEL_A;
- port->ctrlp = (volatile unsigned char *)MVME_SCC_A_ADDR;
- port->datap = port->ctrlp + 2;
- port->port_a = &scc_ports[0];
- port->port_b = &scc_ports[1];
- error = request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
- "SCC-A TX", port);
- if (error)
- goto fail;
- error = request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
- "SCC-A status", port);
- if (error)
- goto fail_free_a_tx;
- error = request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
- "SCC-A RX", port);
- if (error)
- goto fail_free_a_stat;
- error = request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int,
- IRQF_DISABLED, "SCC-A special cond", port);
- if (error)
- goto fail_free_a_rx;
-
- {
- SCC_ACCESS_INIT(port);
-
- /* disable interrupts for this channel */
- SCCwrite(INT_AND_DMA_REG, 0);
- /* Set the interrupt vector */
- SCCwrite(INT_VECTOR_REG, MVME162_IRQ_SCC_BASE);
- /* Interrupt parameters: vector includes status, status low */
- SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
- SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
- }
-
- /* Init channel B */
- port = &scc_ports[1];
- port->channel = CHANNEL_B;
- port->ctrlp = (volatile unsigned char *)MVME_SCC_B_ADDR;
- port->datap = port->ctrlp + 2;
- port->port_a = &scc_ports[0];
- port->port_b = &scc_ports[1];
- error = request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
- "SCC-B TX", port);
- if (error)
- goto fail_free_a_spcond;
- error = request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
- "SCC-B status", port);
- if (error)
- goto fail_free_b_tx;
- error = request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
- "SCC-B RX", port);
- if (error)
- goto fail_free_b_stat;
- error = request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int,
- IRQF_DISABLED, "SCC-B special cond", port);
- if (error)
- goto fail_free_b_rx;
-
- {
- SCC_ACCESS_INIT(port); /* Either channel will do */
-
- /* disable interrupts for this channel */
- SCCwrite(INT_AND_DMA_REG, 0);
- }
-
- /* Ensure interrupts are enabled in the MC2 chip */
- *(volatile char *)0xfff4201d = 0x14;
-
- /* Initialise the tty driver structures and register */
- scc_init_portstructs();
- scc_init_drivers();
-
- return 0;
-
-fail_free_b_rx:
- free_irq(MVME162_IRQ_SCCB_RX, port);
-fail_free_b_stat:
- free_irq(MVME162_IRQ_SCCB_STAT, port);
-fail_free_b_tx:
- free_irq(MVME162_IRQ_SCCB_TX, port);
-fail_free_a_spcond:
- free_irq(MVME162_IRQ_SCCA_SPCOND, port);
-fail_free_a_rx:
- free_irq(MVME162_IRQ_SCCA_RX, port);
-fail_free_a_stat:
- free_irq(MVME162_IRQ_SCCA_STAT, port);
-fail_free_a_tx:
- free_irq(MVME162_IRQ_SCCA_TX, port);
-fail:
- return error;
-}
-#endif
-
-
-#ifdef CONFIG_BVME6000_SCC
-static int __init bvme6000_scc_init(void)
-{
- struct scc_port *port;
- int error;
-
- printk(KERN_INFO "SCC: BVME6000 Serial Driver\n");
- /* Init channel A */
- port = &scc_ports[0];
- port->channel = CHANNEL_A;
- port->ctrlp = (volatile unsigned char *)BVME_SCC_A_ADDR;
- port->datap = port->ctrlp + 4;
- port->port_a = &scc_ports[0];
- port->port_b = &scc_ports[1];
- error = request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
- "SCC-A TX", port);
- if (error)
- goto fail;
- error = request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
- "SCC-A status", port);
- if (error)
- goto fail_free_a_tx;
- error = request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
- "SCC-A RX", port);
- if (error)
- goto fail_free_a_stat;
- error = request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int,
- IRQF_DISABLED, "SCC-A special cond", port);
- if (error)
- goto fail_free_a_rx;
-
- {
- SCC_ACCESS_INIT(port);
-
- /* disable interrupts for this channel */
- SCCwrite(INT_AND_DMA_REG, 0);
- /* Set the interrupt vector */
- SCCwrite(INT_VECTOR_REG, BVME_IRQ_SCC_BASE);
- /* Interrupt parameters: vector includes status, status low */
- SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
- SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
- }
-
- /* Init channel B */
- port = &scc_ports[1];
- port->channel = CHANNEL_B;
- port->ctrlp = (volatile unsigned char *)BVME_SCC_B_ADDR;
- port->datap = port->ctrlp + 4;
- port->port_a = &scc_ports[0];
- port->port_b = &scc_ports[1];
- error = request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
- "SCC-B TX", port);
- if (error)
- goto fail_free_a_spcond;
- error = request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
- "SCC-B status", port);
- if (error)
- goto fail_free_b_tx;
- error = request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
- "SCC-B RX", port);
- if (error)
- goto fail_free_b_stat;
- error = request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int,
- IRQF_DISABLED, "SCC-B special cond", port);
- if (error)
- goto fail_free_b_rx;
-
- {
- SCC_ACCESS_INIT(port); /* Either channel will do */
-
- /* disable interrupts for this channel */
- SCCwrite(INT_AND_DMA_REG, 0);
- }
-
- /* Initialise the tty driver structures and register */
- scc_init_portstructs();
- scc_init_drivers();
-
- return 0;
-
-fail:
- free_irq(BVME_IRQ_SCCA_STAT, port);
-fail_free_a_tx:
- free_irq(BVME_IRQ_SCCA_RX, port);
-fail_free_a_stat:
- free_irq(BVME_IRQ_SCCA_SPCOND, port);
-fail_free_a_rx:
- free_irq(BVME_IRQ_SCCB_TX, port);
-fail_free_a_spcond:
- free_irq(BVME_IRQ_SCCB_STAT, port);
-fail_free_b_tx:
- free_irq(BVME_IRQ_SCCB_RX, port);
-fail_free_b_stat:
- free_irq(BVME_IRQ_SCCB_SPCOND, port);
-fail_free_b_rx:
- return error;
-}
-#endif
-
-
-static int __init vme_scc_init(void)
-{
- int res = -ENODEV;
-
-#ifdef CONFIG_MVME147_SCC
- if (MACH_IS_MVME147)
- res = mvme147_scc_init();
-#endif
-#ifdef CONFIG_MVME162_SCC
- if (MACH_IS_MVME16x)
- res = mvme162_scc_init();
-#endif
-#ifdef CONFIG_BVME6000_SCC
- if (MACH_IS_BVME6000)
- res = bvme6000_scc_init();
-#endif
- return res;
-}
-
-module_init(vme_scc_init);
-
-
-/*---------------------------------------------------------------------------
- * Interrupt handlers
- *--------------------------------------------------------------------------*/
-
-static irqreturn_t scc_rx_int(int irq, void *data)
-{
- unsigned char ch;
- struct scc_port *port = data;
- struct tty_struct *tty = port->gs.port.tty;
- SCC_ACCESS_INIT(port);
-
- ch = SCCread_NB(RX_DATA_REG);
- if (!tty) {
- printk(KERN_WARNING "scc_rx_int with NULL tty!\n");
- SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
- return IRQ_HANDLED;
- }
- tty_insert_flip_char(tty, ch, 0);
-
- /* Check if another character is already ready; in that case, the
- * spcond_int() function must be used, because this character may have an
- * error condition that isn't signalled by the interrupt vector used!
- */
- if (SCCread(INT_PENDING_REG) &
- (port->channel == CHANNEL_A ? IPR_A_RX : IPR_B_RX)) {
- scc_spcond_int (irq, data);
- return IRQ_HANDLED;
- }
-
- SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
-
- tty_flip_buffer_push(tty);
- return IRQ_HANDLED;
-}
-
-
-static irqreturn_t scc_spcond_int(int irq, void *data)
-{
- struct scc_port *port = data;
- struct tty_struct *tty = port->gs.port.tty;
- unsigned char stat, ch, err;
- int int_pending_mask = port->channel == CHANNEL_A ?
- IPR_A_RX : IPR_B_RX;
- SCC_ACCESS_INIT(port);
-
- if (!tty) {
- printk(KERN_WARNING "scc_spcond_int with NULL tty!\n");
- SCCwrite(COMMAND_REG, CR_ERROR_RESET);
- SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
- return IRQ_HANDLED;
- }
- do {
- stat = SCCread(SPCOND_STATUS_REG);
- ch = SCCread_NB(RX_DATA_REG);
-
- if (stat & SCSR_RX_OVERRUN)
- err = TTY_OVERRUN;
- else if (stat & SCSR_PARITY_ERR)
- err = TTY_PARITY;
- else if (stat & SCSR_CRC_FRAME_ERR)
- err = TTY_FRAME;
- else
- err = 0;
-
- tty_insert_flip_char(tty, ch, err);
-
- /* ++TeSche: *All* errors have to be cleared manually,
- * else the condition persists for the next chars
- */
- if (err)
- SCCwrite(COMMAND_REG, CR_ERROR_RESET);
-
- } while(SCCread(INT_PENDING_REG) & int_pending_mask);
-
- SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
-
- tty_flip_buffer_push(tty);
- return IRQ_HANDLED;
-}
-
-
-static irqreturn_t scc_tx_int(int irq, void *data)
-{
- struct scc_port *port = data;
- SCC_ACCESS_INIT(port);
-
- if (!port->gs.port.tty) {
- printk(KERN_WARNING "scc_tx_int with NULL tty!\n");
- SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
- SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);
- SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
- return IRQ_HANDLED;
- }
- while ((SCCread_NB(STATUS_REG) & SR_TX_BUF_EMPTY)) {
- if (port->x_char) {
- SCCwrite(TX_DATA_REG, port->x_char);
- port->x_char = 0;
- }
- else if ((port->gs.xmit_cnt <= 0) ||
- port->gs.port.tty->stopped ||
- port->gs.port.tty->hw_stopped)
- break;
- else {
- SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]);
- port->gs.xmit_tail = port->gs.xmit_tail & (SERIAL_XMIT_SIZE-1);
- if (--port->gs.xmit_cnt <= 0)
- break;
- }
- }
- if ((port->gs.xmit_cnt <= 0) || port->gs.port.tty->stopped ||
- port->gs.port.tty->hw_stopped) {
- /* disable tx interrupts */
- SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
- SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); /* disable tx_int on next tx underrun? */
- port->gs.port.flags &= ~GS_TX_INTEN;
- }
- if (port->gs.port.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars)
- tty_wakeup(port->gs.port.tty);
-
- SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
- return IRQ_HANDLED;
-}
-
-
-static irqreturn_t scc_stat_int(int irq, void *data)
-{
- struct scc_port *port = data;
- unsigned channel = port->channel;
- unsigned char last_sr, sr, changed;
- SCC_ACCESS_INIT(port);
-
- last_sr = scc_last_status_reg[channel];
- sr = scc_last_status_reg[channel] = SCCread_NB(STATUS_REG);
- changed = last_sr ^ sr;
-
- if (changed & SR_DCD) {
- port->c_dcd = !!(sr & SR_DCD);
- if (!(port->gs.port.flags & ASYNC_CHECK_CD))
- ; /* Don't report DCD changes */
- else if (port->c_dcd) {
- wake_up_interruptible(&port->gs.port.open_wait);
- }
- else {
- if (port->gs.port.tty)
- tty_hangup (port->gs.port.tty);
- }
- }
- SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET);
- SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
- return IRQ_HANDLED;
-}
-
-
-/*---------------------------------------------------------------------------
- * generic_serial.c callback funtions
- *--------------------------------------------------------------------------*/
-
-static void scc_disable_tx_interrupts(void *ptr)
-{
- struct scc_port *port = ptr;
- unsigned long flags;
- SCC_ACCESS_INIT(port);
-
- local_irq_save(flags);
- SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
- port->gs.port.flags &= ~GS_TX_INTEN;
- local_irq_restore(flags);
-}
-
-
-static void scc_enable_tx_interrupts(void *ptr)
-{
- struct scc_port *port = ptr;
- unsigned long flags;
- SCC_ACCESS_INIT(port);
-
- local_irq_save(flags);
- SCCmod(INT_AND_DMA_REG, 0xff, IDR_TX_INT_ENAB);
- /* restart the transmitter */
- scc_tx_int (0, port);
- local_irq_restore(flags);
-}
-
-
-static void scc_disable_rx_interrupts(void *ptr)
-{
- struct scc_port *port = ptr;
- unsigned long flags;
- SCC_ACCESS_INIT(port);
-
- local_irq_save(flags);
- SCCmod(INT_AND_DMA_REG,
- ~(IDR_RX_INT_MASK|IDR_PARERR_AS_SPCOND|IDR_EXTSTAT_INT_ENAB), 0);
- local_irq_restore(flags);
-}
-
-
-static void scc_enable_rx_interrupts(void *ptr)
-{
- struct scc_port *port = ptr;
- unsigned long flags;
- SCC_ACCESS_INIT(port);
-
- local_irq_save(flags);
- SCCmod(INT_AND_DMA_REG, 0xff,
- IDR_EXTSTAT_INT_ENAB|IDR_PARERR_AS_SPCOND|IDR_RX_INT_ALL);
- local_irq_restore(flags);
-}
-
-
-static int scc_carrier_raised(struct tty_port *port)
-{
- struct scc_port *sc = container_of(port, struct scc_port, gs.port);
- unsigned channel = sc->channel;
-
- return !!(scc_last_status_reg[channel] & SR_DCD);
-}
-
-
-static void scc_shutdown_port(void *ptr)
-{
- struct scc_port *port = ptr;
-
- port->gs.port.flags &= ~ GS_ACTIVE;
- if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) {
- scc_setsignals (port, 0, 0);
- }
-}
-
-
-static int scc_set_real_termios (void *ptr)
-{
- /* the SCC has char sizes 5,7,6,8 in that order! */
- static int chsize_map[4] = { 0, 2, 1, 3 };
- unsigned cflag, baud, chsize, channel, brgval = 0;
- unsigned long flags;
- struct scc_port *port = ptr;
- SCC_ACCESS_INIT(port);
-
- if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0;
-
- channel = port->channel;
-
- if (channel == CHANNEL_A)
- return 0; /* Settings controlled by boot PROM */
-
- cflag = port->gs.port.tty->termios->c_cflag;
- baud = port->gs.baud;
- chsize = (cflag & CSIZE) >> 4;
-
- if (baud == 0) {
- /* speed == 0 -> drop DTR */
- local_irq_save(flags);
- SCCmod(TX_CTRL_REG, ~TCR_DTR, 0);
- local_irq_restore(flags);
- return 0;
- }
- else if ((MACH_IS_MVME16x && (baud < 50 || baud > 38400)) ||
- (MACH_IS_MVME147 && (baud < 50 || baud > 19200)) ||
- (MACH_IS_BVME6000 &&(baud < 50 || baud > 76800))) {
- printk(KERN_NOTICE "SCC: Bad speed requested, %d\n", baud);
- return 0;
- }
-
- if (cflag & CLOCAL)
- port->gs.port.flags &= ~ASYNC_CHECK_CD;
- else
- port->gs.port.flags |= ASYNC_CHECK_CD;
-
-#ifdef CONFIG_MVME147_SCC
- if (MACH_IS_MVME147)
- brgval = (M147_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
-#endif
-#ifdef CONFIG_MVME162_SCC
- if (MACH_IS_MVME16x)
- brgval = (MVME_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
-#endif
-#ifdef CONFIG_BVME6000_SCC
- if (MACH_IS_BVME6000)
- brgval = (BVME_SCC_RTxC + baud/2) / (16 * 2 * baud) - 2;
-#endif
- /* Now we have all parameters and can go to set them: */
- local_irq_save(flags);
-
- /* receiver's character size and auto-enables */
- SCCmod(RX_CTRL_REG, ~(RCR_CHSIZE_MASK|RCR_AUTO_ENAB_MODE),
- (chsize_map[chsize] << 6) |
- ((cflag & CRTSCTS) ? RCR_AUTO_ENAB_MODE : 0));
- /* parity and stop bits (both, Tx and Rx), clock mode never changes */
- SCCmod (AUX1_CTRL_REG,
- ~(A1CR_PARITY_MASK | A1CR_MODE_MASK),
- ((cflag & PARENB
- ? (cflag & PARODD ? A1CR_PARITY_ODD : A1CR_PARITY_EVEN)
- : A1CR_PARITY_NONE)
- | (cflag & CSTOPB ? A1CR_MODE_ASYNC_2 : A1CR_MODE_ASYNC_1)));
- /* sender's character size, set DTR for valid baud rate */
- SCCmod(TX_CTRL_REG, ~TCR_CHSIZE_MASK, chsize_map[chsize] << 5 | TCR_DTR);
- /* clock sources never change */
- /* disable BRG before changing the value */
- SCCmod(DPLL_CTRL_REG, ~DCR_BRG_ENAB, 0);
- /* BRG value */
- SCCwrite(TIMER_LOW_REG, brgval & 0xff);
- SCCwrite(TIMER_HIGH_REG, (brgval >> 8) & 0xff);
- /* BRG enable, and clock source never changes */
- SCCmod(DPLL_CTRL_REG, 0xff, DCR_BRG_ENAB);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-
-static int scc_chars_in_buffer (void *ptr)
-{
- struct scc_port *port = ptr;
- SCC_ACCESS_INIT(port);
-
- return (SCCread (SPCOND_STATUS_REG) & SCSR_ALL_SENT) ? 0 : 1;
-}
-
-
-/* Comment taken from sx.c (2.4.0):
- I haven't the foggiest why the decrement use count has to happen
- here. The whole linux serial drivers stuff needs to be redesigned.
- My guess is that this is a hack to minimize the impact of a bug
- elsewhere. Thinking about it some more. (try it sometime) Try
- running minicom on a serial port that is driven by a modularized
- driver. Have the modem hangup. Then remove the driver module. Then
- exit minicom. I expect an "oops". -- REW */
-
-static void scc_hungup(void *ptr)
-{
- scc_disable_tx_interrupts(ptr);
- scc_disable_rx_interrupts(ptr);
-}
-
-
-static void scc_close(void *ptr)
-{
- scc_disable_tx_interrupts(ptr);
- scc_disable_rx_interrupts(ptr);
-}
-
-
-/*---------------------------------------------------------------------------
- * Internal support functions
- *--------------------------------------------------------------------------*/
-
-static void scc_setsignals(struct scc_port *port, int dtr, int rts)
-{
- unsigned long flags;
- unsigned char t;
- SCC_ACCESS_INIT(port);
-
- local_irq_save(flags);
- t = SCCread(TX_CTRL_REG);
- if (dtr >= 0) t = dtr? (t | TCR_DTR): (t & ~TCR_DTR);
- if (rts >= 0) t = rts? (t | TCR_RTS): (t & ~TCR_RTS);
- SCCwrite(TX_CTRL_REG, t);
- local_irq_restore(flags);
-}
-
-
-static void scc_send_xchar(struct tty_struct *tty, char ch)
-{
- struct scc_port *port = tty->driver_data;
-
- port->x_char = ch;
- if (ch)
- scc_enable_tx_interrupts(port);
-}
-
-
-/*---------------------------------------------------------------------------
- * Driver entrypoints referenced from above
- *--------------------------------------------------------------------------*/
-
-static int scc_open (struct tty_struct * tty, struct file * filp)
-{
- int line = tty->index;
- int retval;
- struct scc_port *port = &scc_ports[line];
- int i, channel = port->channel;
- unsigned long flags;
- SCC_ACCESS_INIT(port);
-#if defined(CONFIG_MVME162_SCC) || defined(CONFIG_MVME147_SCC)
- static const struct {
- unsigned reg, val;
- } mvme_init_tab[] = {
- /* Values for MVME162 and MVME147 */
- /* no parity, 1 stop bit, async, 1:16 */
- { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
- /* parity error is special cond, ints disabled, no DMA */
- { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
- /* Rx 8 bits/char, no auto enable, Rx off */
- { RX_CTRL_REG, RCR_CHSIZE_8 },
- /* DTR off, Tx 8 bits/char, RTS off, Tx off */
- { TX_CTRL_REG, TCR_CHSIZE_8 },
- /* special features off */
- { AUX2_CTRL_REG, 0 },
- { CLK_CTRL_REG, CCR_RXCLK_BRG | CCR_TXCLK_BRG },
- { DPLL_CTRL_REG, DCR_BRG_ENAB | DCR_BRG_USE_PCLK },
- /* Start Rx */
- { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
- /* Start Tx */
- { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
- /* Ext/Stat ints: DCD only */
- { INT_CTRL_REG, ICR_ENAB_DCD_INT },
- /* Reset Ext/Stat ints */
- { COMMAND_REG, CR_EXTSTAT_RESET },
- /* ...again */
- { COMMAND_REG, CR_EXTSTAT_RESET },
- };
-#endif
-#if defined(CONFIG_BVME6000_SCC)
- static const struct {
- unsigned reg, val;
- } bvme_init_tab[] = {
- /* Values for BVME6000 */
- /* no parity, 1 stop bit, async, 1:16 */
- { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
- /* parity error is special cond, ints disabled, no DMA */
- { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
- /* Rx 8 bits/char, no auto enable, Rx off */
- { RX_CTRL_REG, RCR_CHSIZE_8 },
- /* DTR off, Tx 8 bits/char, RTS off, Tx off */
- { TX_CTRL_REG, TCR_CHSIZE_8 },
- /* special features off */
- { AUX2_CTRL_REG, 0 },
- { CLK_CTRL_REG, CCR_RTxC_XTAL | CCR_RXCLK_BRG | CCR_TXCLK_BRG },
- { DPLL_CTRL_REG, DCR_BRG_ENAB },
- /* Start Rx */
- { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
- /* Start Tx */
- { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
- /* Ext/Stat ints: DCD only */
- { INT_CTRL_REG, ICR_ENAB_DCD_INT },
- /* Reset Ext/Stat ints */
- { COMMAND_REG, CR_EXTSTAT_RESET },
- /* ...again */
- { COMMAND_REG, CR_EXTSTAT_RESET },
- };
-#endif
- if (!(port->gs.port.flags & ASYNC_INITIALIZED)) {
- local_irq_save(flags);
-#if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC)
- if (MACH_IS_MVME147 || MACH_IS_MVME16x) {
- for (i = 0; i < ARRAY_SIZE(mvme_init_tab); ++i)
- SCCwrite(mvme_init_tab[i].reg, mvme_init_tab[i].val);
- }
-#endif
-#if defined(CONFIG_BVME6000_SCC)
- if (MACH_IS_BVME6000) {
- for (i = 0; i < ARRAY_SIZE(bvme_init_tab); ++i)
- SCCwrite(bvme_init_tab[i].reg, bvme_init_tab[i].val);
- }
-#endif
-
- /* remember status register for detection of DCD and CTS changes */
- scc_last_status_reg[channel] = SCCread(STATUS_REG);
-
- port->c_dcd = 0; /* Prevent initial 1->0 interrupt */
- scc_setsignals (port, 1,1);
- local_irq_restore(flags);
- }
-
- tty->driver_data = port;
- port->gs.port.tty = tty;
- port->gs.port.count++;
- retval = gs_init_port(&port->gs);
- if (retval) {
- port->gs.port.count--;
- return retval;
- }
- port->gs.port.flags |= GS_ACTIVE;
- retval = gs_block_til_ready(port, filp);
-
- if (retval) {
- port->gs.port.count--;
- return retval;
- }
-
- port->c_dcd = tty_port_carrier_raised(&port->gs.port);
-
- scc_enable_rx_interrupts(port);
-
- return 0;
-}
-
-
-static void scc_throttle (struct tty_struct * tty)
-{
- struct scc_port *port = tty->driver_data;
- unsigned long flags;
- SCC_ACCESS_INIT(port);
-
- if (tty->termios->c_cflag & CRTSCTS) {
- local_irq_save(flags);
- SCCmod(TX_CTRL_REG, ~TCR_RTS, 0);
- local_irq_restore(flags);
- }
- if (I_IXOFF(tty))
- scc_send_xchar(tty, STOP_CHAR(tty));
-}
-
-
-static void scc_unthrottle (struct tty_struct * tty)
-{
- struct scc_port *port = tty->driver_data;
- unsigned long flags;
- SCC_ACCESS_INIT(port);
-
- if (tty->termios->c_cflag & CRTSCTS) {
- local_irq_save(flags);
- SCCmod(TX_CTRL_REG, 0xff, TCR_RTS);
- local_irq_restore(flags);
- }
- if (I_IXOFF(tty))
- scc_send_xchar(tty, START_CHAR(tty));
-}
-
-
-static int scc_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- return -ENOIOCTLCMD;
-}
-
-
-static int scc_break_ctl(struct tty_struct *tty, int break_state)
-{
- struct scc_port *port = tty->driver_data;
- unsigned long flags;
- SCC_ACCESS_INIT(port);
-
- local_irq_save(flags);
- SCCmod(TX_CTRL_REG, ~TCR_SEND_BREAK,
- break_state ? TCR_SEND_BREAK : 0);
- local_irq_restore(flags);
- return 0;
-}
-
-
-/*---------------------------------------------------------------------------
- * Serial console stuff...
- *--------------------------------------------------------------------------*/
-
-#define scc_delay() do { __asm__ __volatile__ (" nop; nop"); } while (0)
-
-static void scc_ch_write (char ch)
-{
- volatile char *p = NULL;
-
-#ifdef CONFIG_MVME147_SCC
- if (MACH_IS_MVME147)
- p = (volatile char *)M147_SCC_A_ADDR;
-#endif
-#ifdef CONFIG_MVME162_SCC
- if (MACH_IS_MVME16x)
- p = (volatile char *)MVME_SCC_A_ADDR;
-#endif
-#ifdef CONFIG_BVME6000_SCC
- if (MACH_IS_BVME6000)
- p = (volatile char *)BVME_SCC_A_ADDR;
-#endif
-
- do {
- scc_delay();
- }
- while (!(*p & 4));
- scc_delay();
- *p = 8;
- scc_delay();
- *p = ch;
-}
-
-/* The console must be locked when we get here. */
-
-static void scc_console_write (struct console *co, const char *str, unsigned count)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- while (count--)
- {
- if (*str == '\n')
- scc_ch_write ('\r');
- scc_ch_write (*str++);
- }
- local_irq_restore(flags);
-}
-
-static struct tty_driver *scc_console_device(struct console *c, int *index)
-{
- *index = c->index;
- return scc_driver;
-}
-
-static struct console sercons = {
- .name = "ttyS",
- .write = scc_console_write,
- .device = scc_console_device,
- .flags = CON_PRINTBUFFER,
- .index = -1,
-};
-
-
-static int __init vme_scc_console_init(void)
-{
- if (vme_brdtype == VME_TYPE_MVME147 ||
- vme_brdtype == VME_TYPE_MVME162 ||
- vme_brdtype == VME_TYPE_MVME172 ||
- vme_brdtype == VME_TYPE_BVME4000 ||
- vme_brdtype == VME_TYPE_BVME6000)
- register_console(&sercons);
- return 0;
-}
-console_initcall(vme_scc_console_init);
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / commitdiff