spi/tegra-slink: Factor runtime PM out into transfer prepare/unprepare
authorMark Brown <broonie@linaro.org>
Sat, 27 Jul 2013 11:34:24 +0000 (12:34 +0100)
committerMark Brown <broonie@linaro.org>
Mon, 29 Jul 2013 16:12:38 +0000 (17:12 +0100)
Currently the tegra slink driver acquires a runtime PM reference for the
duration of each transfer. This may result in the IP being powered down
between transfers which would be at best wasteful. Instead it is better
to do this in the callbacks that are generated before and after starting
a series of transfers, keeping the IP powered throughout.

Signed-off-by: Mark Brown <broonie@linaro.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
drivers/spi/spi-tegra20-slink.c

index 80490cc11ce53e72794a1546103b90df42c07fc5..b2fb115df027bfa40aba3f46bc7bd13b170c5509 100644 (file)
@@ -824,6 +824,20 @@ static int tegra_slink_setup(struct spi_device *spi)
        return 0;
 }
 
+static int tegra_slink_prepare_transfer(struct spi_master *spi)
+{
+       struct tegra_slink_data *tspi = spi_master_get_devdata(spi);
+       int ret;
+
+       ret = pm_runtime_get_sync(tspi->dev);
+       if (ret < 0) {
+               dev_err(tspi->dev, "runtime PM get failed: %d\n", ret);
+               return ret;
+       }
+
+       return ret;
+}
+
 static int tegra_slink_transfer_one_message(struct spi_master *master,
                        struct spi_message *msg)
 {
@@ -836,11 +850,6 @@ static int tegra_slink_transfer_one_message(struct spi_master *master,
 
        msg->status = 0;
        msg->actual_length = 0;
-       ret = pm_runtime_get_sync(tspi->dev);
-       if (ret < 0) {
-               dev_err(tspi->dev, "runtime get failed: %d\n", ret);
-               goto done;
-       }
 
        single_xfer = list_is_singular(&msg->transfers);
        list_for_each_entry(xfer, &msg->transfers, transfer_list) {
@@ -878,13 +887,20 @@ static int tegra_slink_transfer_one_message(struct spi_master *master,
 exit:
        tegra_slink_writel(tspi, tspi->def_command_reg, SLINK_COMMAND);
        tegra_slink_writel(tspi, tspi->def_command2_reg, SLINK_COMMAND2);
-       pm_runtime_put(tspi->dev);
-done:
        msg->status = ret;
        spi_finalize_current_message(master);
        return ret;
 }
 
+static int tegra_slink_unprepare_transfer(struct spi_master *spi)
+{
+       struct tegra_slink_data *tspi = spi_master_get_devdata(spi);
+
+       pm_runtime_put(tspi->dev);
+
+       return 0;
+}
+
 static irqreturn_t handle_cpu_based_xfer(struct tegra_slink_data *tspi)
 {
        struct spi_transfer *t = tspi->curr_xfer;
@@ -1085,7 +1101,9 @@ static int tegra_slink_probe(struct platform_device *pdev)
        /* the spi->mode bits understood by this driver: */
        master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
        master->setup = tegra_slink_setup;
+       master->prepare_transfer_hardware = tegra_slink_prepare_transfer;
        master->transfer_one_message = tegra_slink_transfer_one_message;
+       master->unprepare_transfer_hardware = tegra_slink_unprepare_transfer;
        master->num_chipselect = MAX_CHIP_SELECT;
        master->bus_num = -1;