bnx2x: Fix BCM84833 settings
authorYaniv Rosner <yanivr@broadcom.com>
Tue, 31 May 2011 21:28:10 +0000 (21:28 +0000)
committerDavid S. Miller <davem@davemloft.net>
Wed, 1 Jun 2011 20:10:56 +0000 (13:10 -0700)
Fix BCM84833 register settings.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/bnx2x/bnx2x_link.c
drivers/net/bnx2x/bnx2x_reg.h

index ffc3c16166d4c11d5800e94b994f6db206369023..6c70e86fad27a58a094b413290252e0f7941824d 100644 (file)
@@ -6099,111 +6099,106 @@ static void bnx2x_8727_link_reset(struct bnx2x_phy *phy,
 static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy,
                                           struct link_params *params)
 {
-       u16 val, fw_ver1, fw_ver2, cnt, adj;
+       u16 val, fw_ver1, fw_ver2, cnt;
+       u8 port;
        struct bnx2x *bp = params->bp;
 
-       adj = 0;
-       if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
-               adj = -1;
+       port = params->port;
 
        /* For the 32 bits registers in 848xx, access via MDIO2ARM interface.*/
        /* (1) set register 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */
-       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819 + adj, 0x0014);
-       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A + adj, 0xc200);
-       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B + adj, 0x0000);
-       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C + adj, 0x0300);
-       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817 + adj, 0x0009);
+       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0014);
+       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200);
+       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B, 0x0000);
+       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C, 0x0300);
+       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x0009);
 
        for (cnt = 0; cnt < 100; cnt++) {
-               bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818 + adj, &val);
+               bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val);
                if (val & 1)
                        break;
                udelay(5);
        }
        if (cnt == 100) {
                DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(1)\n");
-               bnx2x_save_spirom_version(bp, params->port, 0,
+               bnx2x_save_spirom_version(bp, port, 0,
                                          phy->ver_addr);
                return;
        }
 
 
        /* 2) read register 0xc200_0000 (SPI_FW_STATUS) */
-       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819 + adj, 0x0000);
-       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A + adj, 0xc200);
-       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817 + adj, 0x000A);
+       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000);
+       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200);
+       bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x000A);
        for (cnt = 0; cnt < 100; cnt++) {
-               bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818 + adj, &val);
+               bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val);
                if (val & 1)
                        break;
                udelay(5);
        }
        if (cnt == 100) {
                DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(2)\n");
-               bnx2x_save_spirom_version(bp, params->port, 0,
+               bnx2x_save_spirom_version(bp, port, 0,
                                          phy->ver_addr);
                return;
        }
 
        /* lower 16 bits of the register SPI_FW_STATUS */
-       bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B + adj, &fw_ver1);
+       bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B, &fw_ver1);
        /* upper 16 bits of register SPI_FW_STATUS */
-       bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C + adj, &fw_ver2);
+       bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C, &fw_ver2);
 
-       bnx2x_save_spirom_version(bp, params->port, (fw_ver2<<16) | fw_ver1,
+       bnx2x_save_spirom_version(bp, port, (fw_ver2<<16) | fw_ver1,
                                  phy->ver_addr);
 }
 
 static void bnx2x_848xx_set_led(struct bnx2x *bp,
                                struct bnx2x_phy *phy)
 {
-       u16 val, adj;
-
-       adj = 0;
-       if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
-               adj = -1;
+       u16 val;
 
        /* PHYC_CTL_LED_CTL */
        bnx2x_cl45_read(bp, phy,
                        MDIO_PMA_DEVAD,
-                       MDIO_PMA_REG_8481_LINK_SIGNAL + adj, &val);
+                       MDIO_PMA_REG_8481_LINK_SIGNAL, &val);
        val &= 0xFE00;
        val |= 0x0092;
 
        bnx2x_cl45_write(bp, phy,
                         MDIO_PMA_DEVAD,
-                        MDIO_PMA_REG_8481_LINK_SIGNAL + adj, val);
+                        MDIO_PMA_REG_8481_LINK_SIGNAL, val);
 
        bnx2x_cl45_write(bp, phy,
                         MDIO_PMA_DEVAD,
-                        MDIO_PMA_REG_8481_LED1_MASK + adj,
+                        MDIO_PMA_REG_8481_LED1_MASK,
                         0x80);
 
        bnx2x_cl45_write(bp, phy,
                         MDIO_PMA_DEVAD,
-                        MDIO_PMA_REG_8481_LED2_MASK + adj,
+                        MDIO_PMA_REG_8481_LED2_MASK,
                         0x18);
 
        /* Select activity source by Tx and Rx, as suggested by PHY AE */
        bnx2x_cl45_write(bp, phy,
                         MDIO_PMA_DEVAD,
-                        MDIO_PMA_REG_8481_LED3_MASK + adj,
+                        MDIO_PMA_REG_8481_LED3_MASK,
                         0x0006);
 
        /* Select the closest activity blink rate to that in 10/100/1000 */
        bnx2x_cl45_write(bp, phy,
                        MDIO_PMA_DEVAD,
-                       MDIO_PMA_REG_8481_LED3_BLINK + adj,
+                       MDIO_PMA_REG_8481_LED3_BLINK,
                        0);
 
        bnx2x_cl45_read(bp, phy,
                        MDIO_PMA_DEVAD,
-                       MDIO_PMA_REG_84823_CTL_LED_CTL_1 + adj, &val);
+                       MDIO_PMA_REG_84823_CTL_LED_CTL_1, &val);
        val |= MDIO_PMA_REG_84823_LED3_STRETCH_EN; /* stretch_en for LED3*/
 
        bnx2x_cl45_write(bp, phy,
                         MDIO_PMA_DEVAD,
-                        MDIO_PMA_REG_84823_CTL_LED_CTL_1 + adj, val);
+                        MDIO_PMA_REG_84823_CTL_LED_CTL_1, val);
 
        /* 'Interrupt Mask' */
        bnx2x_cl45_write(bp, phy,
@@ -6217,6 +6212,13 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
 {
        struct bnx2x *bp = params->bp;
        u16 autoneg_val, an_1000_val, an_10_100_val;
+       u16 tmp_req_line_speed;
+
+       tmp_req_line_speed = phy->req_line_speed;
+       if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
+               if (phy->req_line_speed == SPEED_10000)
+                       phy->req_line_speed = SPEED_AUTO_NEG;
+
        /*
         * This phy uses the NIG latch mechanism since link indication
         * arrives through its LED4 and not via its LASI signal, so we
@@ -6336,6 +6338,8 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
        /* Save spirom version */
        bnx2x_save_848xx_spirom_version(phy, params);
 
+       phy->req_line_speed = tmp_req_line_speed;
+
        return 0;
 }
 
@@ -6356,33 +6360,109 @@ static int bnx2x_8481_config_init(struct bnx2x_phy *phy,
        return bnx2x_848xx_cmn_config_init(phy, params, vars);
 }
 
+
+#define PHY84833_HDSHK_WAIT 300
+static int bnx2x_84833_pair_swap_cfg(struct bnx2x_phy *phy,
+                                  struct link_params *params,
+                                  struct link_vars *vars)
+{
+       u32 idx;
+       u16 val;
+       u16 data = 0x01b1;
+       struct bnx2x *bp = params->bp;
+       /* Do pair swap */
+
+
+       /* Write CMD_OPEN_OVERRIDE to STATUS reg */
+       bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
+                       MDIO_84833_TOP_CFG_SCRATCH_REG2,
+                       PHY84833_CMD_OPEN_OVERRIDE);
+       for (idx = 0; idx < PHY84833_HDSHK_WAIT; idx++) {
+               bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
+                               MDIO_84833_TOP_CFG_SCRATCH_REG2, &val);
+               if (val == PHY84833_CMD_OPEN_FOR_CMDS)
+                       break;
+               msleep(1);
+       }
+       if (idx >= PHY84833_HDSHK_WAIT) {
+               DP(NETIF_MSG_LINK, "Pairswap: FW not ready.\n");
+               return -EINVAL;
+       }
+
+       bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
+                       MDIO_84833_TOP_CFG_SCRATCH_REG4,
+                       data);
+       /* Issue pair swap command */
+       bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
+                       MDIO_84833_TOP_CFG_SCRATCH_REG0,
+                       PHY84833_DIAG_CMD_PAIR_SWAP_CHANGE);
+       for (idx = 0; idx < PHY84833_HDSHK_WAIT; idx++) {
+               bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
+                               MDIO_84833_TOP_CFG_SCRATCH_REG2, &val);
+               if ((val == PHY84833_CMD_COMPLETE_PASS) ||
+                       (val == PHY84833_CMD_COMPLETE_ERROR))
+                       break;
+               msleep(1);
+       }
+       if ((idx >= PHY84833_HDSHK_WAIT) ||
+               (val == PHY84833_CMD_COMPLETE_ERROR)) {
+               DP(NETIF_MSG_LINK, "Pairswap: override failed.\n");
+               return -EINVAL;
+       }
+       bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
+                       MDIO_84833_TOP_CFG_SCRATCH_REG2,
+                       PHY84833_CMD_CLEAR_COMPLETE);
+       DP(NETIF_MSG_LINK, "Pairswap OK, val=0x%x\n", data);
+       return 0;
+}
+
 static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
                                   struct link_params *params,
                                   struct link_vars *vars)
 {
        struct bnx2x *bp = params->bp;
        u8 port, initialize = 1;
-       u16 val, adj;
+       u16 val;
        u16 temp;
        u32 actual_phy_selection, cms_enable;
        int rc = 0;
 
-       /* This is just for MDIO_CTL_REG_84823_MEDIA register. */
-       adj = 0;
-       if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
-               adj = 3;
-
        msleep(1);
-       if (CHIP_IS_E2(bp))
+
+       if (!(CHIP_IS_E1(bp)))
                port = BP_PATH(bp);
        else
                port = params->port;
-       bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
-                      MISC_REGISTERS_GPIO_OUTPUT_HIGH,
-                      port);
+
+       if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) {
+               bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
+                              MISC_REGISTERS_GPIO_OUTPUT_HIGH,
+                              port);
+       } else {
+               bnx2x_cl45_write(bp, phy,
+                               MDIO_PMA_DEVAD,
+                               MDIO_PMA_REG_CTRL, 0x8000);
+       }
+
        bnx2x_wait_reset_complete(bp, phy, params);
        /* Wait for GPHY to come out of reset */
        msleep(50);
+
+       /* Bring PHY out of super isolate mode */
+       if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) {
+               bnx2x_cl45_read(bp, phy,
+                               MDIO_CTL_DEVAD,
+                               MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val);
+               val &= ~MDIO_84833_SUPER_ISOLATE;
+               bnx2x_cl45_write(bp, phy,
+                               MDIO_CTL_DEVAD,
+                               MDIO_84833_TOP_CFG_XGPHY_STRAP1, val);
+               bnx2x_wait_reset_complete(bp, phy, params);
+       }
+
+       if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
+               bnx2x_84833_pair_swap_cfg(phy, params, vars);
+
        /*
         * BCM84823 requires that XGXS links up first @ 10G for normal behavior
         */
@@ -6395,7 +6475,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
        /* Set dual-media configuration according to configuration */
 
        bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
-                       MDIO_CTL_REG_84823_MEDIA + adj, &val);
+                       MDIO_CTL_REG_84823_MEDIA, &val);
        val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK |
                 MDIO_CTL_REG_84823_MEDIA_LINE_MASK |
                 MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN |
@@ -6428,7 +6508,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
                val |= MDIO_CTL_REG_84823_MEDIA_FIBER_1G;
 
        bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
-                        MDIO_CTL_REG_84823_MEDIA + adj, val);
+                        MDIO_CTL_REG_84823_MEDIA, val);
        DP(NETIF_MSG_LINK, "Multi_phy config = 0x%x, Media control = 0x%x\n",
                   params->multi_phy_config, val);
 
@@ -6459,20 +6539,16 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy,
                                  struct link_vars *vars)
 {
        struct bnx2x *bp = params->bp;
-       u16 val, val1, val2, adj;
+       u16 val, val1, val2;
        u8 link_up = 0;
 
-       /* Reg offset adjustment for 84833 */
-       adj = 0;
-       if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
-               adj = -1;
 
        /* Check 10G-BaseT link status */
        /* Check PMD signal ok */
        bnx2x_cl45_read(bp, phy,
                        MDIO_AN_DEVAD, 0xFFFA, &val1);
        bnx2x_cl45_read(bp, phy,
-                       MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL + adj,
+                       MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL,
                        &val2);
        DP(NETIF_MSG_LINK, "BCM848xx: PMD_SIGNAL 1.a811 = 0x%x\n", val2);
 
@@ -6577,13 +6653,21 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy,
 {
        struct bnx2x *bp = params->bp;
        u8 port;
-       if (CHIP_IS_E2(bp))
+
+       if (!(CHIP_IS_E1(bp)))
                port = BP_PATH(bp);
        else
                port = params->port;
-       bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
-                      MISC_REGISTERS_GPIO_OUTPUT_LOW,
-                      port);
+
+       if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) {
+               bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
+                              MISC_REGISTERS_GPIO_OUTPUT_LOW,
+                              port);
+       } else {
+               bnx2x_cl45_write(bp, phy,
+                               MDIO_PMA_DEVAD,
+                               MDIO_PMA_REG_CTRL, 0x800);
+       }
 }
 
 static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy,
@@ -6591,11 +6675,17 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy,
 {
        struct bnx2x *bp = params->bp;
        u16 val;
+       u8 port;
+
+       if (!(CHIP_IS_E1(bp)))
+               port = BP_PATH(bp);
+       else
+               port = params->port;
 
        switch (mode) {
        case LED_MODE_OFF:
 
-               DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OFF\n", params->port);
+               DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OFF\n", port);
 
                if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
                    SHARED_HW_CFG_LED_EXTPHY1) {
@@ -6631,7 +6721,7 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy,
        case LED_MODE_FRONT_PANEL_OFF:
 
                DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE FRONT PANEL OFF\n",
-                  params->port);
+                  port);
 
                if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
                    SHARED_HW_CFG_LED_EXTPHY1) {
@@ -6666,7 +6756,7 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy,
                break;
        case LED_MODE_ON:
 
-               DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE ON\n", params->port);
+               DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE ON\n", port);
 
                if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
                    SHARED_HW_CFG_LED_EXTPHY1) {
@@ -6713,7 +6803,7 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy,
 
        case LED_MODE_OPER:
 
-               DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OPER\n", params->port);
+               DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OPER\n", port);
 
                if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
                    SHARED_HW_CFG_LED_EXTPHY1) {
index 7260d09cf25f694438b7d1c0100de93275700421..11d35250b092befae215fa8b9215ac6d938e6f20 100644 (file)
@@ -6202,6 +6202,29 @@ Theotherbitsarereservedandshouldbezero*/
 #define MDIO_PMA_REG_84823_CTL_LED_CTL_1               0xa8e3
 #define MDIO_PMA_REG_84823_LED3_STRETCH_EN             0x0080
 
+/* BCM84833 only */
+#define MDIO_84833_TOP_CFG_XGPHY_STRAP1                        0x401a
+#define MDIO_84833_SUPER_ISOLATE               0x8000
+/* These are mailbox register set used by 84833. */
+#define MDIO_84833_TOP_CFG_SCRATCH_REG0                        0x4005
+#define MDIO_84833_TOP_CFG_SCRATCH_REG1                        0x4006
+#define MDIO_84833_TOP_CFG_SCRATCH_REG2                        0x4007
+#define MDIO_84833_TOP_CFG_SCRATCH_REG3                        0x4008
+#define MDIO_84833_TOP_CFG_SCRATCH_REG4                        0x4009
+
+/* Mailbox command set used by 84833. */
+#define PHY84833_DIAG_CMD_PAIR_SWAP_CHANGE             0x2
+/* Mailbox status set used by 84833. */
+#define PHY84833_CMD_RECEIVED                          0x0001
+#define PHY84833_CMD_IN_PROGRESS                       0x0002
+#define PHY84833_CMD_COMPLETE_PASS                     0x0004
+#define PHY84833_CMD_COMPLETE_ERROR                    0x0008
+#define PHY84833_CMD_OPEN_FOR_CMDS                     0x0010
+#define PHY84833_CMD_SYSTEM_BOOT                       0x0020
+#define PHY84833_CMD_NOT_OPEN_FOR_CMDS                 0x0040
+#define PHY84833_CMD_CLEAR_COMPLETE                    0x0080
+#define PHY84833_CMD_OPEN_OVERRIDE                     0xa5a5
+
 #define IGU_FUNC_BASE                  0x0400
 
 #define IGU_ADDR_MSIX                  0x0000