Attaching a keyboard, using it as a wakeup via
|for f in $(find /sys/devices/ocp.3/
47400000.usb -name wakeup)
|do
| echo enabled > $f
|done
going into standby
| echo standby > /sys/power/state
and now a wake up by a pressing a key.
What happens is that the system wakes up but the USB device is dead. The
USB stack tries to send a few control URBs but nothing comes back.
Eventually it gaves up and the device remains dead:
|[ 632.559678] PM: Wakeup source USB1_PHY
|[ 632.581074] PM: noirq resume of devices complete after 21.261 msecs
|[ 632.607521] PM: early resume of devices complete after 10.360 msecs
|[ 632.616854] net eth2: initializing cpsw version 1.12 (0)
|[ 632.704126] net eth2: phy found : id is : 0x4dd074
|[ 636.704048] libphy:
4a101000.mdio:00 - Link is Up - 1000/Full
|[ 638.444620] usb 1-1: reset low-speed USB device number 2 using musb-hdrc
|[ 653.713435] usb 1-1: device descriptor read/64, error -110
|[ 669.093435] usb 1-1: device descriptor read/64, error -110
|[ 669.473424] usb 1-1: reset low-speed USB device number 2 using musb-hdrc
|[ 684.743436] usb 1-1: device descriptor read/64, error -110
|[ 690.065097] PM: resume of devices complete after 57450.744 msecs
|[ 690.076601] PM: Finishing wakeup.
|[ 690.076627] Restarting tasks ...
It seems that since we got woken up via MUSB_INTR_RESUME the
musb_host_finish_resume() callback is executed before the
resume-callbacks of the PHY and glue layer are invoked. If I delay it
until the glue layer resumed then I don't see this problem.
I also move musb_host_resume_root_hub() into that callback since I don't
see any reason in doing anything resume-link if there are still pieces
not restored.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
| MUSB_PORT_STAT_RESUME;
musb->rh_timer = jiffies
+ msecs_to_jiffies(20);
- schedule_delayed_work(
- &musb->finish_resume_work,
- msecs_to_jiffies(20));
+ musb->need_finish_resume = 1;
musb->xceiv->otg->state = OTG_STATE_A_HOST;
musb->is_active = 1;
- musb_host_resume_root_hub(musb);
break;
case OTG_STATE_B_WAIT_ACON:
musb->xceiv->otg->state = OTG_STATE_B_PERIPHERAL;
mask = MUSB_DEVCTL_BDEVICE | MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV;
if ((devctl & mask) != (musb->context.devctl & mask))
musb->port1_status = 0;
+ if (musb->need_finish_resume) {
+ musb->need_finish_resume = 0;
+ schedule_delayed_work(&musb->finish_resume_work,
+ msecs_to_jiffies(20));
+ }
return 0;
}
/* is_suspended means USB B_PERIPHERAL suspend */
unsigned is_suspended:1;
+ unsigned need_finish_resume :1;
/* may_wakeup means remote wakeup is enabled */
unsigned may_wakeup:1;
musb->xceiv->otg->state = OTG_STATE_A_HOST;
spin_unlock_irqrestore(&musb->lock, flags);
+ musb_host_resume_root_hub(musb);
}
void musb_port_suspend(struct musb *musb, bool do_suspend)