source "drivers/staging/most/aim-v4l2/Kconfig"
+source "drivers/staging/most/hdm-dim2/Kconfig"
+
endif
obj-$(CONFIG_AIM_NETWORK) += aim-network/
obj-$(CONFIG_AIM_SOUND) += aim-sound/
obj-$(CONFIG_AIM_V4L2) += aim-v4l2/
+obj-$(CONFIG_HDM_DIM2) += hdm-dim2/
--- /dev/null
+#
+# MediaLB configuration
+#
+
+config HDM_DIM2
+ tristate "DIM2 HDM"
+
+ ---help---
+ Say Y here if you want to connect via MediaLB to network tranceiver.
+ This device driver is platform dependent and needs an addtional
+ platform driver to be installed. For more information contact
+ maintainer of this driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called hdm_dim2.
--- /dev/null
+obj-$(CONFIG_HDM_DIM2) += hdm_dim2.o
+
+hdm_dim2-objs := dim2_hdm.o dim2_hal.o dim2_sysfs.o
+ccflags-y += -Idrivers/staging/most/mostcore/
+ccflags-y += -Idrivers/staging/most/aim-network/
--- /dev/null
+/*
+ * dim2_errors.h - Definitions of errors for DIM2 HAL API
+ * (MediaLB, Device Interface Macro IP, OS62420)
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+#ifndef _MOST_DIM_ERRORS_H
+#define _MOST_DIM_ERRORS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/**
+ * MOST DIM errors.
+ */
+enum dim_errors_t {
+ /** Not an error */
+ DIM_NO_ERROR = 0,
+
+ /** Bad base address for DIM2 IP */
+ DIM_INIT_ERR_DIM_ADDR = 0x10,
+
+ /**< Bad MediaLB clock */
+ DIM_INIT_ERR_MLB_CLOCK,
+
+ /** Bad channel address */
+ DIM_INIT_ERR_CHANNEL_ADDRESS,
+
+ /** Out of DBR memory */
+ DIM_INIT_ERR_OUT_OF_MEMORY,
+
+ /** DIM API is called while DIM is not initialized successfully */
+ DIM_ERR_DRIVER_NOT_INITIALIZED = 0x20,
+
+ /**
+ * Configuration does not respect hardware limitations
+ * for isochronous or synchronous channels
+ */
+ DIM_ERR_BAD_CONFIG,
+
+ /**
+ * Buffer size does not respect hardware limitations
+ * for isochronous or synchronous channels
+ */
+ DIM_ERR_BAD_BUFFER_SIZE,
+
+ DIM_ERR_UNDERFLOW,
+
+ DIM_ERR_OVERFLOW,
+};
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _MOST_DIM_ERRORS_H */
--- /dev/null
+/*
+ * dim2_hal.c - DIM2 HAL implementation
+ * (MediaLB, Device Interface Macro IP, OS62420)
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+/* Author: Andrey Shvetsov <andrey.shvetsov@k2l.de> */
+
+#include "dim2_hal.h"
+#include "dim2_errors.h"
+#include "dim2_reg.h"
+#include <linux/stddef.h>
+
+
+/*
+ * The number of frames per sub-buffer for synchronous channels.
+ * Allowed values: 1, 2, 4, 8, 16, 32, 64.
+ */
+#define FRAMES_PER_SUBBUFF 16
+
+/*
+ * Size factor for synchronous DBR buffer.
+ * Minimal value is 4*FRAMES_PER_SUBBUFF.
+ */
+#define SYNC_DBR_FACTOR (4u * (u16)FRAMES_PER_SUBBUFF)
+
+/*
+ * Size factor for isochronous DBR buffer.
+ * Minimal value is 3.
+ */
+#define ISOC_DBR_FACTOR 3u
+
+/*
+ * Number of 32-bit units for DBR map.
+ *
+ * 1: block size is 512, max allocation is 16K
+ * 2: block size is 256, max allocation is 8K
+ * 4: block size is 128, max allocation is 4K
+ * 8: block size is 64, max allocation is 2K
+ *
+ * Min allocated space is block size.
+ * Max possible allocated space is 32 blocks.
+ */
+#define DBR_MAP_SIZE 2
+
+
+/* -------------------------------------------------------------------------- */
+/* not configurable area */
+
+#define CDT 0x00
+#define ADT 0x40
+#define MLB_CAT 0x80
+#define AHB_CAT 0x88
+
+#define DBR_SIZE (16*1024) /* specified by IP */
+#define DBR_BLOCK_SIZE (DBR_SIZE / 32 / DBR_MAP_SIZE)
+
+
+/* -------------------------------------------------------------------------- */
+/* generic helper functions and macros */
+
+#define MLBC0_FCNT_VAL_MACRO(n) MLBC0_FCNT_VAL_ ## n ## FPSB
+#define MLBC0_FCNT_VAL(fpsb) MLBC0_FCNT_VAL_MACRO(fpsb)
+
+static inline u32 bit_mask(u8 position)
+{
+ return (u32)1 << position;
+}
+
+static inline bool dim_on_error(u8 error_id, const char *error_message)
+{
+ DIMCB_OnError(error_id, error_message);
+ return false;
+}
+
+
+/* -------------------------------------------------------------------------- */
+/* types and local variables */
+
+struct lld_global_vars_t {
+ bool dim_is_initialized;
+ bool mcm_is_initialized;
+ struct dim2_regs *dim2; /* DIM2 core base address */
+ u32 dbr_map[DBR_MAP_SIZE];
+};
+
+static struct lld_global_vars_t g = { false };
+
+
+/* -------------------------------------------------------------------------- */
+
+static int dbr_get_mask_size(u16 size)
+{
+ int i;
+
+ for (i = 0; i < 6; i++)
+ if (size <= (DBR_BLOCK_SIZE << i))
+ return 1 << i;
+ return 0;
+}
+
+/**
+ * Allocates DBR memory.
+ * @param size Allocating memory size.
+ * @return Offset in DBR memory by success or DBR_SIZE if out of memory.
+ */
+static int alloc_dbr(u16 size)
+{
+ int mask_size;
+ int i, block_idx = 0;
+
+ if (size <= 0)
+ return DBR_SIZE; /* out of memory */
+
+ mask_size = dbr_get_mask_size(size);
+ if (mask_size == 0)
+ return DBR_SIZE; /* out of memory */
+
+ for (i = 0; i < DBR_MAP_SIZE; i++) {
+ u32 const blocks = (size + DBR_BLOCK_SIZE - 1) / DBR_BLOCK_SIZE;
+ u32 mask = ~((~(u32)0) << blocks);
+
+ do {
+ if ((g.dbr_map[i] & mask) == 0) {
+ g.dbr_map[i] |= mask;
+ return block_idx * DBR_BLOCK_SIZE;
+ }
+ block_idx += mask_size;
+ /* do shift left with 2 steps for case mask_size == 32 */
+ mask <<= mask_size - 1;
+ } while ((mask <<= 1) != 0);
+ }
+
+ return DBR_SIZE; /* out of memory */
+}
+
+static void free_dbr(int offs, int size)
+{
+ int block_idx = offs / DBR_BLOCK_SIZE;
+ u32 const blocks = (size + DBR_BLOCK_SIZE - 1) / DBR_BLOCK_SIZE;
+ u32 mask = ~((~(u32)0) << blocks);
+
+ mask <<= block_idx % 32;
+ g.dbr_map[block_idx / 32] &= ~mask;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static u32 dim2_read_ctr(u32 ctr_addr, u16 mdat_idx)
+{
+ DIMCB_IoWrite(&g.dim2->MADR, ctr_addr);
+
+ /* wait till transfer is completed */
+ while ((DIMCB_IoRead(&g.dim2->MCTL) & 1) != 1)
+ continue;
+
+ DIMCB_IoWrite(&g.dim2->MCTL, 0); /* clear transfer complete */
+
+ return DIMCB_IoRead((&g.dim2->MDAT0) + mdat_idx);
+}
+
+static void dim2_write_ctr_mask(u32 ctr_addr, const u32 *mask, const u32 *value)
+{
+ enum { MADR_WNR_BIT = 31 };
+
+ DIMCB_IoWrite(&g.dim2->MCTL, 0); /* clear transfer complete */
+
+ if (mask[0] != 0)
+ DIMCB_IoWrite(&g.dim2->MDAT0, value[0]);
+ if (mask[1] != 0)
+ DIMCB_IoWrite(&g.dim2->MDAT1, value[1]);
+ if (mask[2] != 0)
+ DIMCB_IoWrite(&g.dim2->MDAT2, value[2]);
+ if (mask[3] != 0)
+ DIMCB_IoWrite(&g.dim2->MDAT3, value[3]);
+
+ DIMCB_IoWrite(&g.dim2->MDWE0, mask[0]);
+ DIMCB_IoWrite(&g.dim2->MDWE1, mask[1]);
+ DIMCB_IoWrite(&g.dim2->MDWE2, mask[2]);
+ DIMCB_IoWrite(&g.dim2->MDWE3, mask[3]);
+
+ DIMCB_IoWrite(&g.dim2->MADR, bit_mask(MADR_WNR_BIT) | ctr_addr);
+
+ /* wait till transfer is completed */
+ while ((DIMCB_IoRead(&g.dim2->MCTL) & 1) != 1)
+ continue;
+
+ DIMCB_IoWrite(&g.dim2->MCTL, 0); /* clear transfer complete */
+}
+
+static inline void dim2_write_ctr(u32 ctr_addr, const u32 *value)
+{
+ u32 const mask[4] = { 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF };
+
+ dim2_write_ctr_mask(ctr_addr, mask, value);
+}
+
+static inline void dim2_clear_ctr(u32 ctr_addr)
+{
+ u32 const value[4] = { 0, 0, 0, 0 };
+
+ dim2_write_ctr(ctr_addr, value);
+}
+
+static void dim2_configure_cat(u8 cat_base, u8 ch_addr, u8 ch_type,
+ bool read_not_write, bool sync_mfe)
+{
+ u16 const cat =
+ (read_not_write << CAT_RNW_BIT) |
+ (ch_type << CAT_CT_SHIFT) |
+ (ch_addr << CAT_CL_SHIFT) |
+ (sync_mfe << CAT_MFE_BIT) |
+ (false << CAT_MT_BIT) |
+ (true << CAT_CE_BIT);
+ u8 const ctr_addr = cat_base + ch_addr / 8;
+ u8 const idx = (ch_addr % 8) / 2;
+ u8 const shift = (ch_addr % 2) * 16;
+ u32 mask[4] = { 0, 0, 0, 0 };
+ u32 value[4] = { 0, 0, 0, 0 };
+
+ mask[idx] = (u32)0xFFFF << shift;
+ value[idx] = cat << shift;
+ dim2_write_ctr_mask(ctr_addr, mask, value);
+}
+
+static void dim2_clear_cat(u8 cat_base, u8 ch_addr)
+{
+ u8 const ctr_addr = cat_base + ch_addr / 8;
+ u8 const idx = (ch_addr % 8) / 2;
+ u8 const shift = (ch_addr % 2) * 16;
+ u32 mask[4] = { 0, 0, 0, 0 };
+ u32 value[4] = { 0, 0, 0, 0 };
+
+ mask[idx] = (u32)0xFFFF << shift;
+ dim2_write_ctr_mask(ctr_addr, mask, value);
+}
+
+static void dim2_configure_cdt(u8 ch_addr, u16 dbr_address, u16 hw_buffer_size,
+ u16 packet_length)
+{
+ u32 cdt[4] = { 0, 0, 0, 0 };
+
+ if (packet_length)
+ cdt[1] = ((packet_length - 1) << CDT1_BS_ISOC_SHIFT);
+
+ cdt[3] =
+ ((hw_buffer_size - 1) << CDT3_BD_SHIFT) |
+ (dbr_address << CDT3_BA_SHIFT);
+ dim2_write_ctr(CDT + ch_addr, cdt);
+}
+
+static void dim2_clear_cdt(u8 ch_addr)
+{
+ u32 cdt[4] = { 0, 0, 0, 0 };
+
+ dim2_write_ctr(CDT + ch_addr, cdt);
+}
+
+static void dim2_configure_adt(u8 ch_addr)
+{
+ u32 adt[4] = { 0, 0, 0, 0 };
+
+ adt[0] =
+ (true << ADT0_CE_BIT) |
+ (true << ADT0_LE_BIT) |
+ (0 << ADT0_PG_BIT);
+
+ dim2_write_ctr(ADT + ch_addr, adt);
+}
+
+static void dim2_clear_adt(u8 ch_addr)
+{
+ u32 adt[4] = { 0, 0, 0, 0 };
+
+ dim2_write_ctr(ADT + ch_addr, adt);
+}
+
+static void dim2_start_ctrl_async(u8 ch_addr, u8 idx, u32 buf_addr,
+ u16 buffer_size)
+{
+ u8 const shift = idx * 16;
+
+ u32 mask[4] = { 0, 0, 0, 0 };
+ u32 adt[4] = { 0, 0, 0, 0 };
+
+ mask[1] =
+ bit_mask(ADT1_PS_BIT + shift) |
+ bit_mask(ADT1_RDY_BIT + shift) |
+ (ADT1_CTRL_ASYNC_BD_MASK << (ADT1_BD_SHIFT + shift));
+ adt[1] =
+ (true << (ADT1_PS_BIT + shift)) |
+ (true << (ADT1_RDY_BIT + shift)) |
+ ((buffer_size - 1) << (ADT1_BD_SHIFT + shift));
+
+ mask[idx + 2] = 0xFFFFFFFF;
+ adt[idx + 2] = buf_addr;
+
+ dim2_write_ctr_mask(ADT + ch_addr, mask, adt);
+}
+
+static void dim2_start_isoc_sync(u8 ch_addr, u8 idx, u32 buf_addr,
+ u16 buffer_size)
+{
+ u8 const shift = idx * 16;
+
+ u32 mask[4] = { 0, 0, 0, 0 };
+ u32 adt[4] = { 0, 0, 0, 0 };
+
+ mask[1] =
+ bit_mask(ADT1_RDY_BIT + shift) |
+ (ADT1_ISOC_SYNC_BD_MASK << (ADT1_BD_SHIFT + shift));
+ adt[1] =
+ (true << (ADT1_RDY_BIT + shift)) |
+ ((buffer_size - 1) << (ADT1_BD_SHIFT + shift));
+
+ mask[idx + 2] = 0xFFFFFFFF;
+ adt[idx + 2] = buf_addr;
+
+ dim2_write_ctr_mask(ADT + ch_addr, mask, adt);
+}
+
+
+static void dim2_clear_ctram(void)
+{
+ u32 ctr_addr;
+
+ for (ctr_addr = 0; ctr_addr < 0x90; ctr_addr++)
+ dim2_clear_ctr(ctr_addr);
+}
+
+static void dim2_configure_channel(
+ u8 ch_addr, u8 type, u8 is_tx, u16 dbr_address, u16 hw_buffer_size,
+ u16 packet_length, bool sync_mfe)
+{
+ dim2_configure_cdt(ch_addr, dbr_address, hw_buffer_size, packet_length);
+ dim2_configure_cat(MLB_CAT, ch_addr, type, is_tx ? 1 : 0, sync_mfe);
+
+ dim2_configure_adt(ch_addr);
+ dim2_configure_cat(AHB_CAT, ch_addr, type, is_tx ? 0 : 1, sync_mfe);
+
+ /* unmask interrupt for used channel, enable mlb_sys_int[0] interrupt */
+ DIMCB_IoWrite(&g.dim2->ACMR0,
+ DIMCB_IoRead(&g.dim2->ACMR0) | bit_mask(ch_addr));
+}
+
+static void dim2_clear_channel(u8 ch_addr)
+{
+ /* mask interrupt for used channel, disable mlb_sys_int[0] interrupt */
+ DIMCB_IoWrite(&g.dim2->ACMR0,
+ DIMCB_IoRead(&g.dim2->ACMR0) & ~bit_mask(ch_addr));
+
+ dim2_clear_cat(AHB_CAT, ch_addr);
+ dim2_clear_adt(ch_addr);
+
+ dim2_clear_cat(MLB_CAT, ch_addr);
+ dim2_clear_cdt(ch_addr);
+}
+
+/* -------------------------------------------------------------------------- */
+/* channel state helpers */
+
+static void state_init(struct int_ch_state *state)
+{
+ state->request_counter = 0;
+ state->service_counter = 0;
+
+ state->idx1 = 0;
+ state->idx2 = 0;
+ state->level = 0;
+}
+
+/* -------------------------------------------------------------------------- */
+/* macro helper functions */
+
+static inline bool check_channel_address(u32 ch_address)
+{
+ return ch_address > 0 && (ch_address % 2) == 0 &&
+ (ch_address / 2) <= (u32)CAT_CL_MASK;
+}
+
+static inline bool check_packet_length(u32 packet_length)
+{
+ u16 const max_size = ((u16)CDT3_BD_ISOC_MASK + 1u) / ISOC_DBR_FACTOR;
+
+ if (packet_length <= 0)
+ return false; /* too small */
+
+ if (packet_length > max_size)
+ return false; /* too big */
+
+ if (packet_length - 1u > (u32)CDT1_BS_ISOC_MASK)
+ return false; /* too big */
+
+ return true;
+}
+
+static inline bool check_bytes_per_frame(u32 bytes_per_frame)
+{
+ u16 const max_size = ((u16)CDT3_BD_MASK + 1u) / SYNC_DBR_FACTOR;
+
+ if (bytes_per_frame <= 0)
+ return false; /* too small */
+
+ if (bytes_per_frame > max_size)
+ return false; /* too big */
+
+ return true;
+}
+
+static inline u16 norm_ctrl_async_buffer_size(u16 buf_size)
+{
+ u16 const max_size = (u16)ADT1_CTRL_ASYNC_BD_MASK + 1u;
+
+ if (buf_size > max_size)
+ return max_size;
+
+ return buf_size;
+}
+
+static inline u16 norm_isoc_buffer_size(u16 buf_size, u16 packet_length)
+{
+ u16 n;
+ u16 const max_size = (u16)ADT1_ISOC_SYNC_BD_MASK + 1u;
+
+ if (buf_size > max_size)
+ buf_size = max_size;
+
+ n = buf_size / packet_length;
+
+ if (n < 2u)
+ return 0; /* too small buffer for given packet_length */
+
+ return packet_length * n;
+}
+
+static inline u16 norm_sync_buffer_size(u16 buf_size, u16 bytes_per_frame)
+{
+ u16 n;
+ u16 const max_size = (u16)ADT1_ISOC_SYNC_BD_MASK + 1u;
+ u32 const unit = bytes_per_frame * (u16)FRAMES_PER_SUBBUFF;
+
+ if (buf_size > max_size)
+ buf_size = max_size;
+
+ n = buf_size / unit;
+
+ if (n < 1u)
+ return 0; /* too small buffer for given bytes_per_frame */
+
+ return unit * n;
+}
+
+static void dim2_cleanup(void)
+{
+ /* disable MediaLB */
+ DIMCB_IoWrite(&g.dim2->MLBC0, false << MLBC0_MLBEN_BIT);
+
+ dim2_clear_ctram();
+
+ /* disable mlb_int interrupt */
+ DIMCB_IoWrite(&g.dim2->MIEN, 0);
+
+ /* clear status for all dma channels */
+ DIMCB_IoWrite(&g.dim2->ACSR0, 0xFFFFFFFF);
+ DIMCB_IoWrite(&g.dim2->ACSR1, 0xFFFFFFFF);
+
+ /* mask interrupts for all channels */
+ DIMCB_IoWrite(&g.dim2->ACMR0, 0);
+ DIMCB_IoWrite(&g.dim2->ACMR1, 0);
+}
+
+static void dim2_initialize(bool enable_6pin, u8 mlb_clock)
+{
+ dim2_cleanup();
+
+ /* configure and enable MediaLB */
+ DIMCB_IoWrite(&g.dim2->MLBC0,
+ enable_6pin << MLBC0_MLBPEN_BIT |
+ mlb_clock << MLBC0_MLBCLK_SHIFT |
+ MLBC0_FCNT_VAL(FRAMES_PER_SUBBUFF) << MLBC0_FCNT_SHIFT |
+ true << MLBC0_MLBEN_BIT);
+
+ /* activate all HBI channels */
+ DIMCB_IoWrite(&g.dim2->HCMR0, 0xFFFFFFFF);
+ DIMCB_IoWrite(&g.dim2->HCMR1, 0xFFFFFFFF);
+
+ /* enable HBI */
+ DIMCB_IoWrite(&g.dim2->HCTL, bit_mask(HCTL_EN_BIT));
+
+ /* configure DMA */
+ DIMCB_IoWrite(&g.dim2->ACTL,
+ ACTL_DMA_MODE_VAL_DMA_MODE_1 << ACTL_DMA_MODE_BIT |
+ true << ACTL_SCE_BIT);
+
+#if 0
+ DIMCB_IoWrite(&g.dim2->MIEN,
+ bit_mask(MIEN_CTX_BREAK_BIT) |
+ bit_mask(MIEN_CTX_PE_BIT) |
+ bit_mask(MIEN_CTX_DONE_BIT) |
+ bit_mask(MIEN_CRX_BREAK_BIT) |
+ bit_mask(MIEN_CRX_PE_BIT) |
+ bit_mask(MIEN_CRX_DONE_BIT) |
+ bit_mask(MIEN_ATX_BREAK_BIT) |
+ bit_mask(MIEN_ATX_PE_BIT) |
+ bit_mask(MIEN_ATX_DONE_BIT) |
+ bit_mask(MIEN_ARX_BREAK_BIT) |
+ bit_mask(MIEN_ARX_PE_BIT) |
+ bit_mask(MIEN_ARX_DONE_BIT));
+#endif
+}
+
+static bool dim2_is_mlb_locked(void)
+{
+ u32 const mask0 = bit_mask(MLBC0_MLBLK_BIT);
+ u32 const mask1 = bit_mask(MLBC1_CLKMERR_BIT) |
+ bit_mask(MLBC1_LOCKERR_BIT);
+ u32 const c1 = DIMCB_IoRead(&g.dim2->MLBC1);
+ u32 const nda_mask = (u32)MLBC1_NDA_MASK << MLBC1_NDA_SHIFT;
+
+ DIMCB_IoWrite(&g.dim2->MLBC1, c1 & nda_mask);
+ return (DIMCB_IoRead(&g.dim2->MLBC1) & mask1) == 0 &&
+ (DIMCB_IoRead(&g.dim2->MLBC0) & mask0) != 0;
+}
+
+
+/* -------------------------------------------------------------------------- */
+/* channel help routines */
+
+static inline bool service_channel(u8 ch_addr, u8 idx)
+{
+ u8 const shift = idx * 16;
+ u32 const adt1 = dim2_read_ctr(ADT + ch_addr, 1);
+
+ if (((adt1 >> (ADT1_DNE_BIT + shift)) & 1) == 0)
+ return false;
+
+ {
+ u32 mask[4] = { 0, 0, 0, 0 };
+ u32 adt_w[4] = { 0, 0, 0, 0 };
+
+ mask[1] =
+ bit_mask(ADT1_DNE_BIT + shift) |
+ bit_mask(ADT1_ERR_BIT + shift) |
+ bit_mask(ADT1_RDY_BIT + shift);
+ dim2_write_ctr_mask(ADT + ch_addr, mask, adt_w);
+ }
+
+ /* clear channel status bit */
+ DIMCB_IoWrite(&g.dim2->ACSR0, bit_mask(ch_addr));
+
+ return true;
+}
+
+
+/* -------------------------------------------------------------------------- */
+/* channel init routines */
+
+static void isoc_init(struct dim_channel *ch, u8 ch_addr, u16 packet_length)
+{
+ state_init(&ch->state);
+
+ ch->addr = ch_addr;
+
+ ch->packet_length = packet_length;
+ ch->bytes_per_frame = 0;
+ ch->done_sw_buffers_number = 0;
+}
+
+static void sync_init(struct dim_channel *ch, u8 ch_addr, u16 bytes_per_frame)
+{
+ state_init(&ch->state);
+
+ ch->addr = ch_addr;
+
+ ch->packet_length = 0;
+ ch->bytes_per_frame = bytes_per_frame;
+ ch->done_sw_buffers_number = 0;
+}
+
+static void channel_init(struct dim_channel *ch, u8 ch_addr)
+{
+ state_init(&ch->state);
+
+ ch->addr = ch_addr;
+
+ ch->packet_length = 0;
+ ch->bytes_per_frame = 0;
+ ch->done_sw_buffers_number = 0;
+}
+
+/* returns true if channel interrupt state is cleared */
+static bool channel_service_interrupt(struct dim_channel *ch)
+{
+ struct int_ch_state *const state = &ch->state;
+
+ if (!service_channel(ch->addr, state->idx2))
+ return false;
+
+ state->idx2 ^= 1;
+ state->request_counter++;
+ return true;
+}
+
+static bool channel_start(struct dim_channel *ch, u32 buf_addr, u16 buf_size)
+{
+ struct int_ch_state *const state = &ch->state;
+
+ if (buf_size <= 0)
+ return dim_on_error(DIM_ERR_BAD_BUFFER_SIZE, "Bad buffer size");
+
+ if (ch->packet_length == 0 && ch->bytes_per_frame == 0 &&
+ buf_size != norm_ctrl_async_buffer_size(buf_size))
+ return dim_on_error(DIM_ERR_BAD_BUFFER_SIZE,
+ "Bad control/async buffer size");
+
+ if (ch->packet_length &&
+ buf_size != norm_isoc_buffer_size(buf_size, ch->packet_length))
+ return dim_on_error(DIM_ERR_BAD_BUFFER_SIZE,
+ "Bad isochronous buffer size");
+
+ if (ch->bytes_per_frame &&
+ buf_size != norm_sync_buffer_size(buf_size, ch->bytes_per_frame))
+ return dim_on_error(DIM_ERR_BAD_BUFFER_SIZE,
+ "Bad synchronous buffer size");
+
+ if (state->level >= 2u)
+ return dim_on_error(DIM_ERR_OVERFLOW, "Channel overflow");
+
+ ++state->level;
+
+ if (ch->packet_length || ch->bytes_per_frame)
+ dim2_start_isoc_sync(ch->addr, state->idx1, buf_addr, buf_size);
+ else
+ dim2_start_ctrl_async(ch->addr, state->idx1, buf_addr, buf_size);
+ state->idx1 ^= 1;
+
+ return true;
+}
+
+static u8 channel_service(struct dim_channel *ch)
+{
+ struct int_ch_state *const state = &ch->state;
+
+ if (state->service_counter != state->request_counter) {
+ state->service_counter++;
+ if (state->level == 0)
+ return DIM_ERR_UNDERFLOW;
+
+ --state->level;
+ ch->done_sw_buffers_number++;
+ }
+
+ return DIM_NO_ERROR;
+}
+
+static bool channel_detach_buffers(struct dim_channel *ch, u16 buffers_number)
+{
+ if (buffers_number > ch->done_sw_buffers_number)
+ return dim_on_error(DIM_ERR_UNDERFLOW, "Channel underflow");
+
+ ch->done_sw_buffers_number -= buffers_number;
+ return true;
+}
+
+
+/* -------------------------------------------------------------------------- */
+/* API */
+
+u8 DIM_Startup(void *dim_base_address, u32 mlb_clock)
+{
+ g.dim_is_initialized = false;
+
+ if (!dim_base_address)
+ return DIM_INIT_ERR_DIM_ADDR;
+
+ /* MediaLB clock: 0 - 256 fs, 1 - 512 fs, 2 - 1024 fs, 3 - 2048 fs */
+ /* MediaLB clock: 4 - 3072 fs, 5 - 4096 fs, 6 - 6144 fs, 7 - 8192 fs */
+ if (mlb_clock >= 8)
+ return DIM_INIT_ERR_MLB_CLOCK;
+
+ g.dim2 = dim_base_address;
+ g.dbr_map[0] = g.dbr_map[1] = 0;
+
+ dim2_initialize(mlb_clock >= 3, mlb_clock);
+
+ g.dim_is_initialized = true;
+
+ return DIM_NO_ERROR;
+}
+
+void DIM_Shutdown(void)
+{
+ g.dim_is_initialized = false;
+ dim2_cleanup();
+}
+
+bool DIM_GetLockState(void)
+{
+ return dim2_is_mlb_locked();
+}
+
+static u8 init_ctrl_async(struct dim_channel *ch, u8 type, u8 is_tx,
+ u16 ch_address, u16 hw_buffer_size)
+{
+ if (!g.dim_is_initialized || !ch)
+ return DIM_ERR_DRIVER_NOT_INITIALIZED;
+
+ if (!check_channel_address(ch_address))
+ return DIM_INIT_ERR_CHANNEL_ADDRESS;
+
+ ch->dbr_size = hw_buffer_size;
+ ch->dbr_addr = alloc_dbr(ch->dbr_size);
+ if (ch->dbr_addr >= DBR_SIZE)
+ return DIM_INIT_ERR_OUT_OF_MEMORY;
+
+ channel_init(ch, ch_address / 2);
+
+ dim2_configure_channel(ch->addr, type, is_tx,
+ ch->dbr_addr, ch->dbr_size, 0, false);
+
+ return DIM_NO_ERROR;
+}
+
+u16 DIM_NormCtrlAsyncBufferSize(u16 buf_size)
+{
+ return norm_ctrl_async_buffer_size(buf_size);
+}
+
+/**
+ * Retrieves maximal possible correct buffer size for isochronous data type
+ * conform to given packet length and not bigger than given buffer size.
+ *
+ * Returns non-zero correct buffer size or zero by error.
+ */
+u16 DIM_NormIsocBufferSize(u16 buf_size, u16 packet_length)
+{
+ if (!check_packet_length(packet_length))
+ return 0;
+
+ return norm_isoc_buffer_size(buf_size, packet_length);
+}
+
+/**
+ * Retrieves maximal possible correct buffer size for synchronous data type
+ * conform to given bytes per frame and not bigger than given buffer size.
+ *
+ * Returns non-zero correct buffer size or zero by error.
+ */
+u16 DIM_NormSyncBufferSize(u16 buf_size, u16 bytes_per_frame)
+{
+ if (!check_bytes_per_frame(bytes_per_frame))
+ return 0;
+
+ return norm_sync_buffer_size(buf_size, bytes_per_frame);
+}
+
+u8 DIM_InitControl(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+ u16 max_buffer_size)
+{
+ return init_ctrl_async(ch, CAT_CT_VAL_CONTROL, is_tx, ch_address,
+ max_buffer_size * 2);
+}
+
+u8 DIM_InitAsync(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+ u16 max_buffer_size)
+{
+ return init_ctrl_async(ch, CAT_CT_VAL_ASYNC, is_tx, ch_address,
+ max_buffer_size * 2);
+}
+
+u8 DIM_InitIsoc(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+ u16 packet_length)
+{
+ if (!g.dim_is_initialized || !ch)
+ return DIM_ERR_DRIVER_NOT_INITIALIZED;
+
+ if (!check_channel_address(ch_address))
+ return DIM_INIT_ERR_CHANNEL_ADDRESS;
+
+ if (!check_packet_length(packet_length))
+ return DIM_ERR_BAD_CONFIG;
+
+ ch->dbr_size = packet_length * ISOC_DBR_FACTOR;
+ ch->dbr_addr = alloc_dbr(ch->dbr_size);
+ if (ch->dbr_addr >= DBR_SIZE)
+ return DIM_INIT_ERR_OUT_OF_MEMORY;
+
+ isoc_init(ch, ch_address / 2, packet_length);
+
+ dim2_configure_channel(ch->addr, CAT_CT_VAL_ISOC, is_tx, ch->dbr_addr,
+ ch->dbr_size, packet_length, false);
+
+ return DIM_NO_ERROR;
+}
+
+u8 DIM_InitSync(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+ u16 bytes_per_frame)
+{
+ if (!g.dim_is_initialized || !ch)
+ return DIM_ERR_DRIVER_NOT_INITIALIZED;
+
+ if (!check_channel_address(ch_address))
+ return DIM_INIT_ERR_CHANNEL_ADDRESS;
+
+ if (!check_bytes_per_frame(bytes_per_frame))
+ return DIM_ERR_BAD_CONFIG;
+
+ ch->dbr_size = bytes_per_frame * SYNC_DBR_FACTOR;
+ ch->dbr_addr = alloc_dbr(ch->dbr_size);
+ if (ch->dbr_addr >= DBR_SIZE)
+ return DIM_INIT_ERR_OUT_OF_MEMORY;
+
+ sync_init(ch, ch_address / 2, bytes_per_frame);
+
+ dim2_configure_channel(ch->addr, CAT_CT_VAL_SYNC, is_tx,
+ ch->dbr_addr, ch->dbr_size, 0, true);
+
+ return DIM_NO_ERROR;
+}
+
+u8 DIM_DestroyChannel(struct dim_channel *ch)
+{
+ if (!g.dim_is_initialized || !ch)
+ return DIM_ERR_DRIVER_NOT_INITIALIZED;
+
+ dim2_clear_channel(ch->addr);
+ if (ch->dbr_addr < DBR_SIZE)
+ free_dbr(ch->dbr_addr, ch->dbr_size);
+ ch->dbr_addr = DBR_SIZE;
+
+ return DIM_NO_ERROR;
+}
+
+void DIM_ServiceIrq(struct dim_channel *const *channels)
+{
+ bool state_changed;
+
+ if (!g.dim_is_initialized) {
+ dim_on_error(DIM_ERR_DRIVER_NOT_INITIALIZED,
+ "DIM is not initialized");
+ return;
+ }
+
+ if (!channels) {
+ dim_on_error(DIM_ERR_DRIVER_NOT_INITIALIZED, "Bad channels");
+ return;
+ }
+
+ /*
+ * Use while-loop and a flag to make sure the age is changed back at least once,
+ * otherwise the interrupt may never come if CPU generates interrupt on changing age.
+ *
+ * This cycle runs not more than number of channels, because service_interrupts
+ * routine doesn't start the channel again.
+ */
+ do {
+ struct dim_channel *const *ch = channels;
+
+ state_changed = false;
+
+ while (*ch) {
+ state_changed |= channel_service_interrupt(*ch);
+ ++ch;
+ }
+ } while (state_changed);
+
+ /* clear pending Interrupts */
+ DIMCB_IoWrite(&g.dim2->MS0, 0);
+ DIMCB_IoWrite(&g.dim2->MS1, 0);
+}
+
+u8 DIM_ServiceChannel(struct dim_channel *ch)
+{
+ if (!g.dim_is_initialized || !ch)
+ return DIM_ERR_DRIVER_NOT_INITIALIZED;
+
+ return channel_service(ch);
+}
+
+struct dim_ch_state_t *DIM_GetChannelState(struct dim_channel *ch,
+ struct dim_ch_state_t *state_ptr)
+{
+ if (!ch || !state_ptr)
+ return 0;
+
+ state_ptr->ready = ch->state.level < 2;
+ state_ptr->done_buffers = ch->done_sw_buffers_number;
+
+ return state_ptr;
+}
+
+bool DIM_EnqueueBuffer(struct dim_channel *ch, u32 buffer_addr, u16 buffer_size)
+{
+ if (!ch)
+ return dim_on_error(DIM_ERR_DRIVER_NOT_INITIALIZED, "Bad channel");
+
+ return channel_start(ch, buffer_addr, buffer_size);
+}
+
+bool DIM_DetachBuffers(struct dim_channel *ch, u16 buffers_number)
+{
+ if (!ch)
+ return dim_on_error(DIM_ERR_DRIVER_NOT_INITIALIZED, "Bad channel");
+
+ return channel_detach_buffers(ch, buffers_number);
+}
+
+u32 DIM_ReadRegister(u8 register_index)
+{
+ return DIMCB_IoRead((u32 *)g.dim2 + register_index);
+}
--- /dev/null
+/*
+ * dim2_hal.h - DIM2 HAL interface
+ * (MediaLB, Device Interface Macro IP, OS62420)
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+#ifndef _DIM2_HAL_H
+#define _DIM2_HAL_H
+
+#include <linux/types.h>
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * The values below are specified in the hardware specification.
+ * So, they should not be changed until the hardware specification changes.
+ */
+enum mlb_clk_speed {
+ CLK_256FS = 0,
+ CLK_512FS = 1,
+ CLK_1024FS = 2,
+ CLK_2048FS = 3,
+ CLK_3072FS = 4,
+ CLK_4096FS = 5,
+ CLK_6144FS = 6,
+ CLK_8192FS = 7,
+};
+
+struct dim_ch_state_t {
+ bool ready; /* Shows readiness to enqueue next buffer */
+ u16 done_buffers; /* Number of completed buffers */
+};
+
+typedef int atomic_counter_t;
+
+struct int_ch_state {
+ /* changed only in interrupt context */
+ volatile atomic_counter_t request_counter;
+
+ /* changed only in task context */
+ volatile atomic_counter_t service_counter;
+
+ u8 idx1;
+ u8 idx2;
+ u8 level; /* [0..2], buffering level */
+};
+
+struct dim_channel {
+ struct int_ch_state state;
+ u8 addr;
+ u16 dbr_addr;
+ u16 dbr_size;
+ u16 packet_length; /*< Isochronous packet length in bytes. */
+ u16 bytes_per_frame; /*< Synchronous bytes per frame. */
+ u16 done_sw_buffers_number; /*< Done software buffers number. */
+};
+
+
+u8 DIM_Startup(void *dim_base_address, u32 mlb_clock);
+
+void DIM_Shutdown(void);
+
+bool DIM_GetLockState(void);
+
+u16 DIM_NormCtrlAsyncBufferSize(u16 buf_size);
+
+u16 DIM_NormIsocBufferSize(u16 buf_size, u16 packet_length);
+
+u16 DIM_NormSyncBufferSize(u16 buf_size, u16 bytes_per_frame);
+
+u8 DIM_InitControl(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+ u16 max_buffer_size);
+
+u8 DIM_InitAsync(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+ u16 max_buffer_size);
+
+u8 DIM_InitIsoc(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+ u16 packet_length);
+
+u8 DIM_InitSync(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+ u16 bytes_per_frame);
+
+u8 DIM_DestroyChannel(struct dim_channel *ch);
+
+void DIM_ServiceIrq(struct dim_channel *const *channels);
+
+u8 DIM_ServiceChannel(struct dim_channel *ch);
+
+struct dim_ch_state_t *DIM_GetChannelState(struct dim_channel *ch,
+ struct dim_ch_state_t *dim_ch_state_ptr);
+
+bool DIM_EnqueueBuffer(struct dim_channel *ch, u32 buffer_addr,
+ u16 buffer_size);
+
+bool DIM_DetachBuffers(struct dim_channel *ch, u16 buffers_number);
+
+u32 DIM_ReadRegister(u8 register_index);
+
+
+extern u32 DIMCB_IoRead(u32 *ptr32);
+
+extern void DIMCB_IoWrite(u32 *ptr32, u32 value);
+
+extern void DIMCB_OnError(u8 error_id, const char *error_message);
+
+extern void DIMCB_OnFail(const char *filename, int linenum);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _DIM2_HAL_H */
--- /dev/null
+/*
+ * dim2_hdm.c - MediaLB DIM2 Hardware Dependent Module
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/printk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/sched.h>
+#include <linux/kthread.h>
+
+#include <mostcore.h>
+#include <networking.h>
+#include "dim2_hal.h"
+#include "dim2_hdm.h"
+#include "dim2_errors.h"
+#include "dim2_sysfs.h"
+
+#define DMA_CHANNELS (32 - 1) /* channel 0 is a system channel */
+
+#define MAX_BUFFERS_PACKET 32
+#define MAX_BUFFERS_STREAMING 32
+#define MAX_BUF_SIZE_PACKET 2048
+#define MAX_BUF_SIZE_STREAMING (8*1024)
+
+/* command line parameter to select clock speed */
+static char *clock_speed;
+module_param(clock_speed, charp, 0);
+MODULE_PARM_DESC(clock_speed, "MediaLB Clock Speed");
+
+/*
+ * #############################################################################
+ *
+ * The define below activates an utility function used by HAL-simu
+ * for calling DIM interrupt handler.
+ * It is used only for TEST PURPOSE and shall be commented before release.
+ *
+ * #############################################################################
+ */
+/* #define ENABLE_HDM_TEST */
+
+static DEFINE_SPINLOCK(dim_lock);
+
+static void dim2_tasklet_fn(unsigned long data);
+static DECLARE_TASKLET(dim2_tasklet, dim2_tasklet_fn, 0);
+
+/**
+ * struct hdm_channel - private structure to keep channel specific data
+ * @is_initialized: identifier to know whether the channel is initialized
+ * @ch: HAL specific channel data
+ * @pending_list: list to keep MBO's before starting transfer
+ * @started_list: list to keep MBO's after starting transfer
+ * @direction: channel direction (TX or RX)
+ * @data_type: channel data type
+ */
+struct hdm_channel {
+ char name[sizeof "caNNN"];
+ bool is_initialized;
+ struct dim_channel ch;
+ struct list_head pending_list; /* before DIM_EnqueueBuffer() */
+ struct list_head started_list; /* after DIM_EnqueueBuffer() */
+ enum most_channel_direction direction;
+ enum most_channel_data_type data_type;
+};
+
+/**
+ * struct dim2_hdm - private structure to keep interface specific data
+ * @hch: an array of channel specific data
+ * @most_iface: most interface structure
+ * @capabilities: an array of channel capability data
+ * @io_base: I/O register base address
+ * @irq_ahb0: dim2 AHB0 irq number
+ * @clk_speed: user selectable (through command line parameter) clock speed
+ * @netinfo_task: thread to deliver network status
+ * @netinfo_waitq: waitq for the thread to sleep
+ * @deliver_netinfo: to identify whether network status received
+ * @mac_addrs: INIC mac address
+ * @link_state: network link state
+ * @atx_idx: index of async tx channel
+ */
+struct dim2_hdm {
+ struct hdm_channel hch[DMA_CHANNELS];
+ struct most_channel_capability capabilities[DMA_CHANNELS];
+ struct most_interface most_iface;
+ char name[16 + sizeof "dim2-"];
+ void *io_base;
+ unsigned int irq_ahb0;
+ int clk_speed;
+ struct task_struct *netinfo_task;
+ wait_queue_head_t netinfo_waitq;
+ int deliver_netinfo;
+ unsigned char mac_addrs[6];
+ unsigned char link_state;
+ int atx_idx;
+ struct medialb_bus bus;
+};
+
+#define iface_to_hdm(iface) container_of(iface, struct dim2_hdm, most_iface)
+
+/* Macro to identify a network status message */
+#define PACKET_IS_NET_INFO(p) \
+ (((p)[1] == 0x18) && ((p)[2] == 0x05) && ((p)[3] == 0x0C) && \
+ ((p)[13] == 0x3C) && ((p)[14] == 0x00) && ((p)[15] == 0x0A))
+
+#if defined(ENABLE_HDM_TEST)
+static struct dim2_hdm *test_dev;
+#endif
+
+bool dim2_sysfs_get_state_cb(void)
+{
+ bool state;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dim_lock, flags);
+ state = DIM_GetLockState();
+ spin_unlock_irqrestore(&dim_lock, flags);
+
+ return state;
+}
+
+/**
+ * DIMCB_IoRead - callback from HAL to read an I/O register
+ * @ptr32: register address
+ */
+u32 DIMCB_IoRead(u32 *ptr32)
+{
+ return __raw_readl(ptr32);
+}
+
+/**
+ * DIMCB_IoWrite - callback from HAL to write value to an I/O register
+ * @ptr32: register address
+ * @value: value to write
+ */
+void DIMCB_IoWrite(u32 *ptr32, u32 value)
+{
+ __raw_writel(value, ptr32);
+}
+
+/**
+ * DIMCB_OnError - callback from HAL to report miscommunication between
+ * HDM and HAL
+ * @error_id: Error ID
+ * @error_message: Error message. Some text in a free format
+ */
+void DIMCB_OnError(u8 error_id, const char *error_message)
+{
+ pr_err("DIMCB_OnError: error_id - %d, error_message - %s\n", error_id,
+ error_message);
+}
+
+/**
+ * DIMCB_OnFail - callback from HAL to report unrecoverable errors
+ * @filename: Source file where the error happened
+ * @linenum: Line number of the file where the error happened
+ */
+void DIMCB_OnFail(const char *filename, int linenum)
+{
+ pr_err("DIMCB_OnFail: file - %s, line no. - %d\n", filename, linenum);
+}
+
+/**
+ * startup_dim - initialize the dim2 interface
+ * @pdev: platform device
+ *
+ * Get the value of command line parameter "clock_speed" if given or use the
+ * default value, enable the clock and PLL, and initialize the dim2 interface.
+ */
+static int startup_dim(struct platform_device *pdev)
+{
+ struct dim2_hdm *dev = platform_get_drvdata(pdev);
+ struct dim2_platform_data *pdata = pdev->dev.platform_data;
+ u8 hal_ret;
+
+ dev->clk_speed = -1;
+
+ if (clock_speed) {
+ if (!strcmp(clock_speed, "256fs"))
+ dev->clk_speed = CLK_256FS;
+ else if (!strcmp(clock_speed, "512fs"))
+ dev->clk_speed = CLK_512FS;
+ else if (!strcmp(clock_speed, "1024fs"))
+ dev->clk_speed = CLK_1024FS;
+ else if (!strcmp(clock_speed, "2048fs"))
+ dev->clk_speed = CLK_2048FS;
+ else if (!strcmp(clock_speed, "3072fs"))
+ dev->clk_speed = CLK_3072FS;
+ else if (!strcmp(clock_speed, "4096fs"))
+ dev->clk_speed = CLK_4096FS;
+ else if (!strcmp(clock_speed, "6144fs"))
+ dev->clk_speed = CLK_6144FS;
+ else if (!strcmp(clock_speed, "8192fs"))
+ dev->clk_speed = CLK_8192FS;
+ }
+
+ if (dev->clk_speed == -1) {
+ pr_info("Bad or missing clock speed parameter,"
+ " using default value: 3072fs\n");
+ dev->clk_speed = CLK_3072FS;
+ } else
+ pr_info("Selected clock speed: %s\n", clock_speed);
+
+ if (pdata && pdata->init) {
+ int ret = pdata->init(pdata, dev->io_base, dev->clk_speed);
+
+ if (ret)
+ return ret;
+ }
+
+ hal_ret = DIM_Startup(dev->io_base, dev->clk_speed);
+ if (hal_ret != DIM_NO_ERROR) {
+ pr_err("DIM_Startup failed: %d\n", hal_ret);
+ if (pdata && pdata->destroy)
+ pdata->destroy(pdata);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/**
+ * try_start_dim_transfer - try to transfer a buffer on a channel
+ * @hdm_ch: channel specific data
+ *
+ * Transfer a buffer from pending_list if the channel is ready
+ */
+static int try_start_dim_transfer(struct hdm_channel *hdm_ch)
+{
+ u16 buf_size;
+ struct list_head *head = &hdm_ch->pending_list;
+ struct mbo *mbo;
+ unsigned long flags;
+ struct dim_ch_state_t st;
+
+ BUG_ON(hdm_ch == 0);
+ BUG_ON(!hdm_ch->is_initialized);
+
+ spin_lock_irqsave(&dim_lock, flags);
+ if (list_empty(head)) {
+ spin_unlock_irqrestore(&dim_lock, flags);
+ return -EAGAIN;
+ }
+
+ if (!DIM_GetChannelState(&hdm_ch->ch, &st)->ready) {
+ spin_unlock_irqrestore(&dim_lock, flags);
+ return -EAGAIN;
+ }
+
+ mbo = list_entry(head->next, struct mbo, list);
+ buf_size = mbo->buffer_length;
+
+ BUG_ON(mbo->bus_address == 0);
+ if (!DIM_EnqueueBuffer(&hdm_ch->ch, mbo->bus_address, buf_size)) {
+ list_del(head->next);
+ spin_unlock_irqrestore(&dim_lock, flags);
+ mbo->processed_length = 0;
+ mbo->status = MBO_E_INVAL;
+ mbo->complete(mbo);
+ return -EFAULT;
+ }
+
+ list_move_tail(head->next, &hdm_ch->started_list);
+ spin_unlock_irqrestore(&dim_lock, flags);
+
+ return 0;
+}
+
+/**
+ * deliver_netinfo_thread - thread to deliver network status to mostcore
+ * @data: private data
+ *
+ * Wait for network status and deliver it to mostcore once it is received
+ */
+static int deliver_netinfo_thread(void *data)
+{
+ struct dim2_hdm *dev = (struct dim2_hdm *)data;
+
+ while (!kthread_should_stop()) {
+ wait_event_interruptible(dev->netinfo_waitq,
+ dev->deliver_netinfo ||
+ kthread_should_stop());
+
+ if (dev->deliver_netinfo) {
+ dev->deliver_netinfo--;
+ most_deliver_netinfo(&dev->most_iface, dev->link_state,
+ dev->mac_addrs);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * retrieve_netinfo - retrieve network status from received buffer
+ * @dev: private data
+ * @mbo: received MBO
+ *
+ * Parse the message in buffer and get node address, link state, MAC address.
+ * Wake up a thread to deliver this status to mostcore
+ */
+static void retrieve_netinfo(struct dim2_hdm *dev, struct mbo *mbo)
+{
+ u8 *data = mbo->virt_address;
+ u8 *mac = dev->mac_addrs;
+
+ pr_info("Node Address: 0x%03x\n", (u16)data[16] << 8 | data[17]);
+ dev->link_state = data[18];
+ pr_info("NIState: %d\n", dev->link_state);
+ memcpy(mac, data + 19, 6);
+ pr_info("MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+ dev->deliver_netinfo++;
+ wake_up_interruptible(&dev->netinfo_waitq);
+}
+
+/**
+ * service_done_flag - handle completed buffers
+ * @dev: private data
+ * @ch_idx: channel index
+ *
+ * Return back the completed buffers to mostcore, using completion callback
+ */
+static void service_done_flag(struct dim2_hdm *dev, int ch_idx)
+{
+ struct hdm_channel *hdm_ch = dev->hch + ch_idx;
+ struct dim_ch_state_t st;
+ struct list_head *head;
+ struct mbo *mbo;
+ int done_buffers;
+ unsigned long flags;
+ u8 *data;
+
+ BUG_ON(hdm_ch == 0);
+ BUG_ON(!hdm_ch->is_initialized);
+
+ spin_lock_irqsave(&dim_lock, flags);
+
+ done_buffers = DIM_GetChannelState(&hdm_ch->ch, &st)->done_buffers;
+ if (!done_buffers) {
+ spin_unlock_irqrestore(&dim_lock, flags);
+ return;
+ }
+
+ if (!DIM_DetachBuffers(&hdm_ch->ch, done_buffers)) {
+ spin_unlock_irqrestore(&dim_lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&dim_lock, flags);
+
+ head = &hdm_ch->started_list;
+
+ while (done_buffers) {
+ spin_lock_irqsave(&dim_lock, flags);
+ if (list_empty(head)) {
+ spin_unlock_irqrestore(&dim_lock, flags);
+ pr_crit("hard error: started_mbo list is empty "
+ "whereas DIM2 has sent buffers\n");
+ break;
+ }
+
+ mbo = list_entry(head->next, struct mbo, list);
+ list_del(head->next);
+ spin_unlock_irqrestore(&dim_lock, flags);
+
+ data = mbo->virt_address;
+
+ if (hdm_ch->data_type == MOST_CH_ASYNC &&
+ hdm_ch->direction == MOST_CH_RX &&
+ PACKET_IS_NET_INFO(data)) {
+
+ retrieve_netinfo(dev, mbo);
+
+ spin_lock_irqsave(&dim_lock, flags);
+ list_add_tail(&mbo->list, &hdm_ch->pending_list);
+ spin_unlock_irqrestore(&dim_lock, flags);
+ } else {
+ if (hdm_ch->data_type == MOST_CH_CONTROL ||
+ hdm_ch->data_type == MOST_CH_ASYNC) {
+
+ u32 const data_size =
+ (u32)data[0] * 256 + data[1] + 2;
+
+ mbo->processed_length =
+ min(data_size, (u32)mbo->buffer_length);
+ } else {
+ mbo->processed_length = mbo->buffer_length;
+ }
+ mbo->status = MBO_SUCCESS;
+ mbo->complete(mbo);
+ }
+
+ done_buffers--;
+ }
+}
+
+static struct dim_channel **get_active_channels(struct dim2_hdm *dev,
+ struct dim_channel **buffer)
+{
+ int idx = 0;
+ int ch_idx;
+
+ for (ch_idx = 0; ch_idx < DMA_CHANNELS; ch_idx++) {
+ if (dev->hch[ch_idx].is_initialized)
+ buffer[idx++] = &dev->hch[ch_idx].ch;
+ }
+ buffer[idx++] = 0;
+
+ return buffer;
+}
+
+/**
+ * dim2_tasklet_fn - tasklet function
+ * @data: private data
+ *
+ * Service each initialized channel, if needed
+ */
+static void dim2_tasklet_fn(unsigned long data)
+{
+ struct dim2_hdm *dev = (struct dim2_hdm *)data;
+ unsigned long flags;
+ int ch_idx;
+
+ for (ch_idx = 0; ch_idx < DMA_CHANNELS; ch_idx++) {
+ if (!dev->hch[ch_idx].is_initialized)
+ continue;
+
+ spin_lock_irqsave(&dim_lock, flags);
+ DIM_ServiceChannel(&(dev->hch[ch_idx].ch));
+ spin_unlock_irqrestore(&dim_lock, flags);
+
+ service_done_flag(dev, ch_idx);
+ while (!try_start_dim_transfer(dev->hch + ch_idx))
+ continue;
+ }
+}
+
+/**
+ * dim2_ahb_isr - interrupt service routine
+ * @irq: irq number
+ * @_dev: private data
+ *
+ * Acknowledge the interrupt and schedule a tasklet to service channels.
+ * Return IRQ_HANDLED.
+ */
+static irqreturn_t dim2_ahb_isr(int irq, void *_dev)
+{
+ struct dim2_hdm *dev = (struct dim2_hdm *)_dev;
+ struct dim_channel *buffer[DMA_CHANNELS + 1];
+ unsigned long flags;
+
+ spin_lock_irqsave(&dim_lock, flags);
+ DIM_ServiceIrq(get_active_channels(dev, buffer));
+ spin_unlock_irqrestore(&dim_lock, flags);
+
+#if !defined(ENABLE_HDM_TEST)
+ dim2_tasklet.data = (unsigned long)dev;
+ tasklet_schedule(&dim2_tasklet);
+#else
+ dim2_tasklet_fn((unsigned long)dev);
+#endif
+ return IRQ_HANDLED;
+}
+
+#if defined(ENABLE_HDM_TEST)
+
+/*
+ * Utility function used by HAL-simu for calling DIM interrupt handler.
+ * It is used only for TEST PURPOSE.
+ */
+void raise_dim_interrupt(void)
+{
+ (void)dim2_ahb_isr(0, test_dev);
+}
+#endif
+
+/**
+ * complete_all_mbos - complete MBO's in a list
+ * @head: list head
+ *
+ * Delete all the entries in list and return back MBO's to mostcore using
+ * completion call back.
+ */
+static void complete_all_mbos(struct list_head *head)
+{
+ unsigned long flags;
+ struct mbo *mbo;
+
+ for (;;) {
+ spin_lock_irqsave(&dim_lock, flags);
+ if (list_empty(head)) {
+ spin_unlock_irqrestore(&dim_lock, flags);
+ break;
+ }
+
+ mbo = list_entry(head->next, struct mbo, list);
+ list_del(head->next);
+ spin_unlock_irqrestore(&dim_lock, flags);
+
+ mbo->processed_length = 0;
+ mbo->status = MBO_E_CLOSE;
+ mbo->complete(mbo);
+ }
+}
+
+/**
+ * configure_channel - initialize a channel
+ * @iface: interface the channel belongs to
+ * @channel: channel to be configured
+ * @channel_config: structure that holds the configuration information
+ *
+ * Receives configuration information from mostcore and initialize
+ * the corresponding channel. Return 0 on success, negative on failure.
+ */
+static int configure_channel(struct most_interface *most_iface, int ch_idx,
+ struct most_channel_config *ccfg)
+{
+ struct dim2_hdm *dev = iface_to_hdm(most_iface);
+ bool const is_tx = ccfg->direction == MOST_CH_TX;
+ u16 const sub_size = ccfg->subbuffer_size;
+ u16 const buf_size = ccfg->buffer_size;
+ u16 new_size;
+ unsigned long flags;
+ u8 hal_ret;
+ int const ch_addr = ch_idx * 2 + 2;
+ struct hdm_channel *const hdm_ch = dev->hch + ch_idx;
+
+ BUG_ON(ch_idx < 0 || ch_idx >= DMA_CHANNELS);
+
+ if (hdm_ch->is_initialized)
+ return -EPERM;
+
+ switch (ccfg->data_type) {
+ case MOST_CH_CONTROL:
+ new_size = DIM_NormCtrlAsyncBufferSize(buf_size);
+ if (new_size == 0) {
+ pr_err("%s: too small buffer size\n", hdm_ch->name);
+ return -EINVAL;
+ }
+ ccfg->buffer_size = new_size;
+ if (new_size != buf_size)
+ pr_warn("%s: fixed buffer size (%d -> %d)\n",
+ hdm_ch->name, buf_size, new_size);
+ spin_lock_irqsave(&dim_lock, flags);
+ hal_ret = DIM_InitControl(&hdm_ch->ch, is_tx, ch_addr, buf_size);
+ break;
+ case MOST_CH_ASYNC:
+ new_size = DIM_NormCtrlAsyncBufferSize(buf_size);
+ if (new_size == 0) {
+ pr_err("%s: too small buffer size\n", hdm_ch->name);
+ return -EINVAL;
+ }
+ ccfg->buffer_size = new_size;
+ if (new_size != buf_size)
+ pr_warn("%s: fixed buffer size (%d -> %d)\n",
+ hdm_ch->name, buf_size, new_size);
+ spin_lock_irqsave(&dim_lock, flags);
+ hal_ret = DIM_InitAsync(&hdm_ch->ch, is_tx, ch_addr, buf_size);
+ break;
+ case MOST_CH_ISOC_AVP:
+ new_size = DIM_NormIsocBufferSize(buf_size, sub_size);
+ if (new_size == 0) {
+ pr_err("%s: invalid sub-buffer size or "
+ "too small buffer size\n", hdm_ch->name);
+ return -EINVAL;
+ }
+ ccfg->buffer_size = new_size;
+ if (new_size != buf_size)
+ pr_warn("%s: fixed buffer size (%d -> %d)\n",
+ hdm_ch->name, buf_size, new_size);
+ spin_lock_irqsave(&dim_lock, flags);
+ hal_ret = DIM_InitIsoc(&hdm_ch->ch, is_tx, ch_addr, sub_size);
+ break;
+ case MOST_CH_SYNC:
+ new_size = DIM_NormSyncBufferSize(buf_size, sub_size);
+ if (new_size == 0) {
+ pr_err("%s: invalid sub-buffer size or "
+ "too small buffer size\n", hdm_ch->name);
+ return -EINVAL;
+ }
+ ccfg->buffer_size = new_size;
+ if (new_size != buf_size)
+ pr_warn("%s: fixed buffer size (%d -> %d)\n",
+ hdm_ch->name, buf_size, new_size);
+ spin_lock_irqsave(&dim_lock, flags);
+ hal_ret = DIM_InitSync(&hdm_ch->ch, is_tx, ch_addr, sub_size);
+ break;
+ default:
+ pr_err("%s: configure failed, bad channel type: %d\n",
+ hdm_ch->name, ccfg->data_type);
+ return -EINVAL;
+ }
+
+ if (hal_ret != DIM_NO_ERROR) {
+ spin_unlock_irqrestore(&dim_lock, flags);
+ pr_err("%s: configure failed (%d), type: %d, is_tx: %d\n",
+ hdm_ch->name, hal_ret, ccfg->data_type, (int)is_tx);
+ return -ENODEV;
+ }
+
+ hdm_ch->data_type = ccfg->data_type;
+ hdm_ch->direction = ccfg->direction;
+ hdm_ch->is_initialized = true;
+
+ if (hdm_ch->data_type == MOST_CH_ASYNC &&
+ hdm_ch->direction == MOST_CH_TX &&
+ dev->atx_idx < 0)
+ dev->atx_idx = ch_idx;
+
+ spin_unlock_irqrestore(&dim_lock, flags);
+
+ return 0;
+}
+
+/**
+ * enqueue - enqueue a buffer for data transfer
+ * @iface: intended interface
+ * @channel: ID of the channel the buffer is intended for
+ * @mbo: pointer to the buffer object
+ *
+ * Push the buffer into pending_list and try to transfer one buffer from
+ * pending_list. Return 0 on success, negative on failure.
+ */
+static int enqueue(struct most_interface *most_iface, int ch_idx,
+ struct mbo *mbo)
+{
+ struct dim2_hdm *dev = iface_to_hdm(most_iface);
+ struct hdm_channel *hdm_ch = dev->hch + ch_idx;
+ unsigned long flags;
+
+ BUG_ON(ch_idx < 0 || ch_idx >= DMA_CHANNELS);
+
+ if (!hdm_ch->is_initialized)
+ return -EPERM;
+
+ if (mbo->bus_address == 0)
+ return -EFAULT;
+
+ spin_lock_irqsave(&dim_lock, flags);
+ list_add_tail(&mbo->list, &hdm_ch->pending_list);
+ spin_unlock_irqrestore(&dim_lock, flags);
+
+ (void)try_start_dim_transfer(hdm_ch);
+
+ return 0;
+}
+
+/**
+ * request_netinfo - triggers retrieving of network info
+ * @iface: pointer to the interface
+ * @channel_id: corresponding channel ID
+ *
+ * Send a command to INIC which triggers retrieving of network info by means of
+ * "Message exchange over MDP/MEP". Return 0 on success, negative on failure.
+ */
+static void request_netinfo(struct most_interface *most_iface, int ch_idx)
+{
+ struct dim2_hdm *dev = iface_to_hdm(most_iface);
+ struct mbo *mbo;
+ u8 *data;
+
+ if (dev->atx_idx < 0) {
+ pr_err("Async Tx Not initialized\n");
+ return;
+ }
+
+ mbo = most_get_mbo(&dev->most_iface, dev->atx_idx);
+ if (!mbo)
+ return;
+
+ mbo->buffer_length = 5;
+
+ data = mbo->virt_address;
+
+ data[0] = 0x00; /* PML High byte */
+ data[1] = 0x03; /* PML Low byte */
+ data[2] = 0x02; /* PMHL */
+ data[3] = 0x08; /* FPH */
+ data[4] = 0x40; /* FMF (FIFO cmd msg - Triggers NAOverMDP) */
+
+ most_submit_mbo(mbo);
+}
+
+/**
+ * poison_channel - poison buffers of a channel
+ * @iface: pointer to the interface the channel to be poisoned belongs to
+ * @channel_id: corresponding channel ID
+ *
+ * Destroy a channel and complete all the buffers in both started_list &
+ * pending_list. Return 0 on success, negative on failure.
+ */
+static int poison_channel(struct most_interface *most_iface, int ch_idx)
+{
+ struct dim2_hdm *dev = iface_to_hdm(most_iface);
+ struct hdm_channel *hdm_ch = dev->hch + ch_idx;
+ unsigned long flags;
+ u8 hal_ret;
+ int ret = 0;
+
+ BUG_ON(ch_idx < 0 || ch_idx >= DMA_CHANNELS);
+
+ if (!hdm_ch->is_initialized)
+ return -EPERM;
+
+ spin_lock_irqsave(&dim_lock, flags);
+ hal_ret = DIM_DestroyChannel(&hdm_ch->ch);
+ hdm_ch->is_initialized = false;
+ if (ch_idx == dev->atx_idx)
+ dev->atx_idx = -1;
+ spin_unlock_irqrestore(&dim_lock, flags);
+ if (hal_ret != DIM_NO_ERROR) {
+ pr_err("HAL Failed to close channel %s\n", hdm_ch->name);
+ ret = -EFAULT;
+ }
+
+ complete_all_mbos(&hdm_ch->started_list);
+ complete_all_mbos(&hdm_ch->pending_list);
+
+ return ret;
+}
+
+/*
+ * dim2_probe - dim2 probe handler
+ * @pdev: platform device structure
+ *
+ * Register the dim2 interface with mostcore and initialize it.
+ * Return 0 on success, negative on failure.
+ */
+static int dim2_probe(struct platform_device *pdev)
+{
+ struct dim2_hdm *dev;
+ struct resource *res;
+ int ret, i;
+ struct kobject *kobj;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ dev->atx_idx = -1;
+
+ platform_set_drvdata(pdev, dev);
+#if defined(ENABLE_HDM_TEST)
+ test_dev = dev;
+#else
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ pr_err("no memory region defined\n");
+ ret = -ENOENT;
+ goto err_free_dev;
+ }
+
+ if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+ pr_err("failed to request mem region\n");
+ ret = -EBUSY;
+ goto err_free_dev;
+ }
+
+ dev->io_base = ioremap(res->start, resource_size(res));
+ if (!dev->io_base) {
+ pr_err("failed to ioremap\n");
+ ret = -ENOMEM;
+ goto err_release_mem;
+ }
+
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
+ pr_err("failed to get irq\n");
+ goto err_unmap_io;
+ }
+ dev->irq_ahb0 = ret;
+
+ ret = request_irq(dev->irq_ahb0, dim2_ahb_isr, 0, "mlb_ahb0", dev);
+ if (ret) {
+ pr_err("failed to request IRQ: %d, err: %d\n", dev->irq_ahb0, ret);
+ goto err_unmap_io;
+ }
+#endif
+ init_waitqueue_head(&dev->netinfo_waitq);
+ dev->deliver_netinfo = 0;
+ dev->netinfo_task = kthread_run(&deliver_netinfo_thread, (void *)dev,
+ "dim2_netinfo");
+ if (IS_ERR(dev->netinfo_task)) {
+ ret = PTR_ERR(dev->netinfo_task);
+ goto err_free_irq;
+ }
+
+ for (i = 0; i < DMA_CHANNELS; i++) {
+ struct most_channel_capability *cap = dev->capabilities + i;
+ struct hdm_channel *hdm_ch = dev->hch + i;
+
+ INIT_LIST_HEAD(&hdm_ch->pending_list);
+ INIT_LIST_HEAD(&hdm_ch->started_list);
+ hdm_ch->is_initialized = false;
+ snprintf(hdm_ch->name, sizeof(hdm_ch->name), "ca%d", i * 2 + 2);
+
+ cap->name_suffix = hdm_ch->name;
+ cap->direction = MOST_CH_RX | MOST_CH_TX;
+ cap->data_type = MOST_CH_CONTROL | MOST_CH_ASYNC |
+ MOST_CH_ISOC_AVP | MOST_CH_SYNC;
+ cap->num_buffers_packet = MAX_BUFFERS_PACKET;
+ cap->buffer_size_packet = MAX_BUF_SIZE_PACKET;
+ cap->num_buffers_streaming = MAX_BUFFERS_STREAMING;
+ cap->buffer_size_streaming = MAX_BUF_SIZE_STREAMING;
+ }
+
+ {
+ const char *fmt;
+
+ if (sizeof(res->start) == sizeof(long long))
+ fmt = "dim2-%016llx";
+ else if (sizeof(res->start) == sizeof(long))
+ fmt = "dim2-%016lx";
+ else
+ fmt = "dim2-%016x";
+
+ snprintf(dev->name, sizeof(dev->name), fmt, res->start);
+ }
+
+ dev->most_iface.interface = ITYPE_MEDIALB_DIM2;
+ dev->most_iface.description = dev->name;
+ dev->most_iface.num_channels = DMA_CHANNELS;
+ dev->most_iface.channel_vector = dev->capabilities;
+ dev->most_iface.configure = configure_channel;
+ dev->most_iface.enqueue = enqueue;
+ dev->most_iface.poison_channel = poison_channel;
+ dev->most_iface.request_netinfo = request_netinfo;
+
+ kobj = most_register_interface(&dev->most_iface);
+ if (IS_ERR(kobj)) {
+ ret = PTR_ERR(kobj);
+ pr_err("failed to register MOST interface\n");
+ goto err_stop_thread;
+ }
+
+ ret = dim2_sysfs_probe(&dev->bus, kobj);
+ if (ret)
+ goto err_unreg_iface;
+
+ ret = startup_dim(pdev);
+ if (ret) {
+ pr_err("failed to initialize DIM2\n");
+ goto err_destroy_bus;
+ }
+
+ return 0;
+
+err_destroy_bus:
+ dim2_sysfs_destroy(&dev->bus);
+err_unreg_iface:
+ most_deregister_interface(&dev->most_iface);
+err_stop_thread:
+ kthread_stop(dev->netinfo_task);
+err_free_irq:
+#if !defined(ENABLE_HDM_TEST)
+ free_irq(dev->irq_ahb0, dev);
+err_unmap_io:
+ iounmap(dev->io_base);
+err_release_mem:
+ release_mem_region(res->start, resource_size(res));
+err_free_dev:
+#endif
+ kfree(dev);
+
+ return ret;
+}
+
+/**
+ * dim2_remove - dim2 remove handler
+ * @pdev: platform device structure
+ *
+ * Unregister the interface from mostcore
+ */
+static int dim2_remove(struct platform_device *pdev)
+{
+ struct dim2_hdm *dev = platform_get_drvdata(pdev);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct dim2_platform_data *pdata = pdev->dev.platform_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dim_lock, flags);
+ DIM_Shutdown();
+ spin_unlock_irqrestore(&dim_lock, flags);
+
+ if (pdata && pdata->destroy)
+ pdata->destroy(pdata);
+
+ dim2_sysfs_destroy(&dev->bus);
+ most_deregister_interface(&dev->most_iface);
+ kthread_stop(dev->netinfo_task);
+#if !defined(ENABLE_HDM_TEST)
+ free_irq(dev->irq_ahb0, dev);
+ iounmap(dev->io_base);
+ release_mem_region(res->start, resource_size(res));
+#endif
+ kfree(dev);
+ platform_set_drvdata(pdev, NULL);
+
+ /*
+ * break link to local platform_device_id struct
+ * to prevent crash by unload platform device module
+ */
+ pdev->id_entry = 0;
+
+ return 0;
+}
+
+static struct platform_device_id dim2_id[] = {
+ { "medialb_dim2" },
+ { }, /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(platform, dim2_id);
+
+static struct platform_driver dim2_driver = {
+ .probe = dim2_probe,
+ .remove = dim2_remove,
+ .id_table = dim2_id,
+ .driver = {
+ .name = "hdm_dim2",
+ .owner = THIS_MODULE,
+ },
+};
+
+/**
+ * dim2_hdm_init - Driver Registration Routine
+ */
+static int __init dim2_hdm_init(void)
+{
+ pr_info("dim2_hdm_init()\n");
+ return platform_driver_register(&dim2_driver);
+}
+
+/**
+ * dim2_hdm_exit - Driver Cleanup Routine
+ **/
+static void __exit dim2_hdm_exit(void)
+{
+ pr_info("dim2_hdm_exit()\n");
+ platform_driver_unregister(&dim2_driver);
+}
+
+module_init(dim2_hdm_init);
+module_exit(dim2_hdm_exit);
+
+MODULE_AUTHOR("Jain Roy Ambi <JainRoy.Ambi@microchip.com>");
+MODULE_AUTHOR("Andrey Shvetsov <andrey.shvetsov@k2l.de>");
+MODULE_DESCRIPTION("MediaLB DIM2 Hardware Dependent Module");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * dim2_hdm.h - MediaLB DIM2 HDM Header
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+#ifndef DIM2_HDM_H
+#define DIM2_HDM_H
+
+struct device;
+
+/* platform dependent data for dim2 interface */
+struct dim2_platform_data {
+ int (*init)(struct dim2_platform_data *pd, void *io_base, int clk_speed);
+ void (*destroy)(struct dim2_platform_data *pd);
+ void *priv;
+};
+
+#endif /* DIM2_HDM_H */
--- /dev/null
+/*
+ * dim2_reg.h - Definitions for registers of DIM2
+ * (MediaLB, Device Interface Macro IP, OS62420)
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+#ifndef DIM2_OS62420_H
+#define DIM2_OS62420_H
+
+#include <linux/types.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+struct dim2_regs {
+ /* 0x00 */ u32 MLBC0;
+ /* 0x01 */ u32 rsvd0[1];
+ /* 0x02 */ u32 MLBPC0;
+ /* 0x03 */ u32 MS0;
+ /* 0x04 */ u32 rsvd1[1];
+ /* 0x05 */ u32 MS1;
+ /* 0x06 */ u32 rsvd2[2];
+ /* 0x08 */ u32 MSS;
+ /* 0x09 */ u32 MSD;
+ /* 0x0A */ u32 rsvd3[1];
+ /* 0x0B */ u32 MIEN;
+ /* 0x0C */ u32 rsvd4[1];
+ /* 0x0D */ u32 MLBPC2;
+ /* 0x0E */ u32 MLBPC1;
+ /* 0x0F */ u32 MLBC1;
+ /* 0x10 */ u32 rsvd5[0x10];
+ /* 0x20 */ u32 HCTL;
+ /* 0x21 */ u32 rsvd6[1];
+ /* 0x22 */ u32 HCMR0;
+ /* 0x23 */ u32 HCMR1;
+ /* 0x24 */ u32 HCER0;
+ /* 0x25 */ u32 HCER1;
+ /* 0x26 */ u32 HCBR0;
+ /* 0x27 */ u32 HCBR1;
+ /* 0x28 */ u32 rsvd7[8];
+ /* 0x30 */ u32 MDAT0;
+ /* 0x31 */ u32 MDAT1;
+ /* 0x32 */ u32 MDAT2;
+ /* 0x33 */ u32 MDAT3;
+ /* 0x34 */ u32 MDWE0;
+ /* 0x35 */ u32 MDWE1;
+ /* 0x36 */ u32 MDWE2;
+ /* 0x37 */ u32 MDWE3;
+ /* 0x38 */ u32 MCTL;
+ /* 0x39 */ u32 MADR;
+ /* 0x3A */ u32 rsvd8[0xB6];
+ /* 0xF0 */ u32 ACTL;
+ /* 0xF1 */ u32 rsvd9[3];
+ /* 0xF4 */ u32 ACSR0;
+ /* 0xF5 */ u32 ACSR1;
+ /* 0xF6 */ u32 ACMR0;
+ /* 0xF7 */ u32 ACMR1;
+};
+
+
+#define DIM2_MASK(n) (~((~(u32)0)<<(n)))
+
+enum {
+ MLBC0_MLBLK_BIT = 7,
+
+ MLBC0_MLBPEN_BIT = 5,
+
+ MLBC0_MLBCLK_SHIFT = 2,
+ MLBC0_MLBCLK_VAL_256FS = 0,
+ MLBC0_MLBCLK_VAL_512FS = 1,
+ MLBC0_MLBCLK_VAL_1024FS = 2,
+ MLBC0_MLBCLK_VAL_2048FS = 3,
+
+ MLBC0_FCNT_SHIFT = 15,
+ MLBC0_FCNT_MASK = 7,
+ MLBC0_FCNT_VAL_1FPSB = 0,
+ MLBC0_FCNT_VAL_2FPSB = 1,
+ MLBC0_FCNT_VAL_4FPSB = 2,
+ MLBC0_FCNT_VAL_8FPSB = 3,
+ MLBC0_FCNT_VAL_16FPSB = 4,
+ MLBC0_FCNT_VAL_32FPSB = 5,
+ MLBC0_FCNT_VAL_64FPSB = 6,
+
+ MLBC0_MLBEN_BIT = 0,
+
+ MIEN_CTX_BREAK_BIT = 29,
+ MIEN_CTX_PE_BIT = 28,
+ MIEN_CTX_DONE_BIT = 27,
+
+ MIEN_CRX_BREAK_BIT = 26,
+ MIEN_CRX_PE_BIT = 25,
+ MIEN_CRX_DONE_BIT = 24,
+
+ MIEN_ATX_BREAK_BIT = 22,
+ MIEN_ATX_PE_BIT = 21,
+ MIEN_ATX_DONE_BIT = 20,
+
+ MIEN_ARX_BREAK_BIT = 19,
+ MIEN_ARX_PE_BIT = 18,
+ MIEN_ARX_DONE_BIT = 17,
+
+ MIEN_SYNC_PE_BIT = 16,
+
+ MIEN_ISOC_BUFO_BIT = 1,
+ MIEN_ISOC_PE_BIT = 0,
+
+ MLBC1_NDA_SHIFT = 8,
+ MLBC1_NDA_MASK = 0xFF,
+
+ MLBC1_CLKMERR_BIT = 7,
+ MLBC1_LOCKERR_BIT = 6,
+
+ ACTL_DMA_MODE_BIT = 2,
+ ACTL_DMA_MODE_VAL_DMA_MODE_0 = 0,
+ ACTL_DMA_MODE_VAL_DMA_MODE_1 = 1,
+ ACTL_SCE_BIT = 0,
+
+ HCTL_EN_BIT = 15
+};
+
+enum {
+ CDT1_BS_ISOC_SHIFT = 0,
+ CDT1_BS_ISOC_MASK = DIM2_MASK(9),
+
+ CDT3_BD_SHIFT = 0,
+ CDT3_BD_MASK = DIM2_MASK(12),
+ CDT3_BD_ISOC_MASK = DIM2_MASK(13),
+ CDT3_BA_SHIFT = 16,
+
+ ADT0_CE_BIT = 15,
+ ADT0_LE_BIT = 14,
+ ADT0_PG_BIT = 13,
+
+ ADT1_RDY_BIT = 15,
+ ADT1_DNE_BIT = 14,
+ ADT1_ERR_BIT = 13,
+ ADT1_PS_BIT = 12,
+ ADT1_MEP_BIT = 11,
+ ADT1_BD_SHIFT = 0,
+ ADT1_CTRL_ASYNC_BD_MASK = DIM2_MASK(11),
+ ADT1_ISOC_SYNC_BD_MASK = DIM2_MASK(13),
+
+ CAT_MFE_BIT = 14,
+
+ CAT_MT_BIT = 13,
+
+ CAT_RNW_BIT = 12,
+
+ CAT_CE_BIT = 11,
+
+ CAT_CT_SHIFT = 8,
+ CAT_CT_VAL_SYNC = 0,
+ CAT_CT_VAL_CONTROL = 1,
+ CAT_CT_VAL_ASYNC = 2,
+ CAT_CT_VAL_ISOC = 3,
+
+ CAT_CL_SHIFT = 0,
+ CAT_CL_MASK = DIM2_MASK(6)
+};
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* DIM2_OS62420_H */
--- /dev/null
+/*
+ * dim2_sysfs.c - MediaLB sysfs information
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+/* Author: Andrey Shvetsov <andrey.shvetsov@k2l.de> */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include "dim2_sysfs.h"
+
+struct bus_attr {
+ struct attribute attr;
+ ssize_t (*show)(struct medialb_bus *bus, char *buf);
+ ssize_t (*store)(struct medialb_bus *bus, const char *buf, size_t count);
+};
+
+static ssize_t state_show(struct medialb_bus *bus, char *buf)
+{
+ bool state = dim2_sysfs_get_state_cb();
+
+ return sprintf(buf, "%s\n", state ? "locked" : "");
+}
+
+static struct bus_attr state_attr = __ATTR_RO(state);
+
+static struct attribute *bus_default_attrs[] = {
+ &state_attr.attr,
+ NULL,
+};
+
+static struct attribute_group bus_attr_group = {
+ .attrs = bus_default_attrs,
+};
+
+static void bus_kobj_release(struct kobject *kobj)
+{
+}
+
+static ssize_t bus_kobj_attr_show(struct kobject *kobj, struct attribute *attr,
+ char *buf)
+{
+ struct medialb_bus *bus =
+ container_of(kobj, struct medialb_bus, kobj_group);
+ struct bus_attr *xattr = container_of(attr, struct bus_attr, attr);
+
+ if (!xattr->show)
+ return -EIO;
+
+ return xattr->show(bus, buf);
+}
+
+static ssize_t bus_kobj_attr_store(struct kobject *kobj, struct attribute *attr,
+ const char *buf, size_t count)
+{
+ ssize_t ret;
+ struct medialb_bus *bus =
+ container_of(kobj, struct medialb_bus, kobj_group);
+ struct bus_attr *xattr = container_of(attr, struct bus_attr, attr);
+
+ if (!xattr->store)
+ return -EIO;
+
+ ret = xattr->store(bus, buf, count);
+ return ret;
+}
+
+static struct sysfs_ops const bus_kobj_sysfs_ops = {
+ .show = bus_kobj_attr_show,
+ .store = bus_kobj_attr_store,
+};
+
+static struct kobj_type bus_ktype = {
+ .release = bus_kobj_release,
+ .sysfs_ops = &bus_kobj_sysfs_ops,
+};
+
+int dim2_sysfs_probe(struct medialb_bus *bus, struct kobject *parent_kobj)
+{
+ int err;
+
+ kobject_init(&bus->kobj_group, &bus_ktype);
+ err = kobject_add(&bus->kobj_group, parent_kobj, "bus");
+ if (err) {
+ pr_err("kobject_add() failed: %d\n", err);
+ goto err_kobject_add;
+ }
+
+ err = sysfs_create_group(&bus->kobj_group, &bus_attr_group);
+ if (err) {
+ pr_err("sysfs_create_group() failed: %d\n", err);
+ goto err_create_group;
+ }
+
+ return 0;
+
+err_create_group:
+ kobject_put(&bus->kobj_group);
+
+err_kobject_add:
+ return err;
+}
+
+void dim2_sysfs_destroy(struct medialb_bus *bus)
+{
+ kobject_put(&bus->kobj_group);
+}
--- /dev/null
+/*
+ * dim2_sysfs.h - MediaLB sysfs information
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+/* Author: Andrey Shvetsov <andrey.shvetsov@k2l.de> */
+
+#ifndef DIM2_SYSFS_H
+#define DIM2_SYSFS_H
+
+
+#include <linux/kobject.h>
+
+
+struct medialb_bus {
+ struct kobject kobj_group;
+};
+
+struct dim2_hdm;
+
+int dim2_sysfs_probe(struct medialb_bus *bus, struct kobject *parent_kobj);
+void dim2_sysfs_destroy(struct medialb_bus *bus);
+
+/*
+ * callback,
+ * must deliver MediaLB state as true if locked or false if unlocked
+ */
+bool dim2_sysfs_get_state_cb(void);
+
+
+#endif /* DIM2_SYSFS_H */
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / commitdiff