.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.support_ct_kill_exit = true,
- .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
struct iwl_cfg iwl1000_bg_cfg = {
.broken_powersave = true,
.led_compensation = 61,
.chain_noise_num_beacons = IWL4965_CAL_NUM_BEACONS,
- .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
/* Module firmware */
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
- .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
struct iwl_cfg iwl5100_bgn_cfg = {
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
- .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
struct iwl_cfg iwl5350_agn_cfg = {
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
- .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
struct iwl_cfg iwl5150_agn_cfg = {
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
- .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
struct iwl_cfg iwl5150_abg_cfg = {
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
- .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
struct iwl_cfg iwl6000i_2abg_cfg = {
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
- .sm_ps_mode = WLAN_HT_CAP_SM_PS_DYNAMIC,
};
struct iwl_cfg iwl6050_2abg_cfg = {
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
- .sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
hw->flags |= IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
+ if (priv->cfg->sku & IWL_SKU_N)
+ hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
+ IEEE80211_HW_SUPPORTS_STATIC_SMPS;
+
hw->sta_data_size = sizeof(struct iwl_station_priv);
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
priv->band = IEEE80211_BAND_2GHZ;
priv->iw_mode = NL80211_IFTYPE_STATION;
+ priv->current_ht_config.smps = IEEE80211_SMPS_STATIC;
/* Choose which receivers/antennas to use */
if (priv->cfg->ops->hcmd->set_rxon_chain)
if (priv->cfg->ht_greenfield_support)
ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD;
ht_info->cap |= IEEE80211_HT_CAP_SGI_20;
- ht_info->cap |= (IEEE80211_HT_CAP_SM_PS &
- (priv->cfg->sm_ps_mode << 2));
max_bit_rate = MAX_BIT_RATE_20_MHZ;
if (priv->hw_params.ht40_channel & BIT(band)) {
ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
static bool is_single_rx_stream(struct iwl_priv *priv)
{
- return !priv->current_ht_config.is_ht ||
+ return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
priv->current_ht_config.single_chain_sufficient;
}
*/
static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
{
- int idle_cnt = active_cnt;
- bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
-
- /* # Rx chains when idling and maybe trying to save power */
- switch (priv->cfg->sm_ps_mode) {
- case WLAN_HT_CAP_SM_PS_STATIC:
- idle_cnt = (is_cam) ? active_cnt : IWL_NUM_IDLE_CHAINS_SINGLE;
- break;
- case WLAN_HT_CAP_SM_PS_DYNAMIC:
- idle_cnt = (is_cam) ? IWL_NUM_IDLE_CHAINS_DUAL :
- IWL_NUM_IDLE_CHAINS_SINGLE;
- break;
- case WLAN_HT_CAP_SM_PS_DISABLED:
- break;
- case WLAN_HT_CAP_SM_PS_INVALID:
+ /* # Rx chains when idling, depending on SMPS mode */
+ switch (priv->current_ht_config.smps) {
+ case IEEE80211_SMPS_STATIC:
+ case IEEE80211_SMPS_DYNAMIC:
+ return IWL_NUM_IDLE_CHAINS_SINGLE;
+ case IEEE80211_SMPS_OFF:
+ return active_cnt;
default:
- IWL_ERR(priv, "invalid sm_ps mode %u\n",
- priv->cfg->sm_ps_mode);
- WARN_ON(1);
- break;
+ WARN(1, "invalid SMPS mode %d",
+ priv->current_ht_config.smps);
+ return active_cnt;
}
- return idle_cnt;
}
/* up to 4 chains */
IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
}
+ if (changed & (IEEE80211_CONF_CHANGE_SMPS |
+ IEEE80211_CONF_CHANGE_CHANNEL)) {
+ /* mac80211 uses static for non-HT which is what we want */
+ priv->current_ht_config.smps = conf->smps_mode;
+
+ /*
+ * Recalculate chain counts.
+ *
+ * If monitor mode is enabled then mac80211 will
+ * set up the SM PS mode to OFF if an HT channel is
+ * configured.
+ */
+ if (priv->cfg->ops->hcmd->set_rxon_chain)
+ priv->cfg->ops->hcmd->set_rxon_chain(priv);
+ }
/* during scanning mac80211 will delay channel setting until
* scan finish with changed = 0
iwl_set_tx_power(priv, conf->power_level, false);
}
- /* call to ensure that 4965 rx_chain is set properly in monitor mode */
- if (priv->cfg->ops->hcmd->set_rxon_chain)
- priv->cfg->ops->hcmd->set_rxon_chain(priv);
-
if (!iwl_is_ready(priv)) {
IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
goto out;
* @chain_noise_num_beacons: number of beacons used to compute chain noise
* @adv_thermal_throttle: support advance thermal throttle
* @support_ct_kill_exit: support ct kill exit condition
- * @sm_ps_mode: spatial multiplexing power save mode
* @support_wimax_coexist: support wimax/wifi co-exist
*
* We enable the driver to be backward compatible wrt API version. The
const bool supports_idle;
bool adv_thermal_throttle;
bool support_ct_kill_exit;
- u8 sm_ps_mode;
const bool support_wimax_coexist;
};
bool is_ht;
bool is_40mhz;
bool single_chain_sufficient;
+ enum ieee80211_smps_mode smps; /* current smps mode */
/* BSS related data */
u8 extension_chan_offset;
u8 ht_protection;