/*
- * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
#ifndef __IRQ_USER_H__
#define __IRQ_USER_H__
-#include "uml-config.h"
+#include "sysdep/ptrace.h"
struct irq_fd {
struct irq_fd *next;
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
#include "sysdep/ptrace.h"
#include "sysdep/faultinfo.h"
-#include "uml-config.h"
typedef void (*kern_hndl)(int, struct uml_pt_regs *);
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
#ifndef __OS_H__
#define __OS_H__
-#include "uml-config.h"
-#include "asm/types.h"
-#include "../os/include/file.h"
-#include "sysdep/ptrace.h"
-#include "kern_util.h"
-#include "skas/mm_id.h"
+#include <stdarg.h>
#include "irq_user.h"
+#include "kern_util.h"
+#include "longjmp.h"
+#include "mm_id.h"
#include "sysdep/tls.h"
-#include "sysdep/archsetjmp.h"
+#include "../os/include/file.h"
#define CATCH_EINTR(expr) while ((errno = 0, ((expr) < 0)) && (errno == EINTR))
extern int os_set_owner(int fd, int pid);
extern int os_mode_fd(int fd, int mode);
-extern int os_seek_file(int fd, __u64 offset);
+extern int os_seek_file(int fd, unsigned long long offset);
extern int os_open_file(char *file, struct openflags flags, int mode);
extern int os_read_file(int fd, void *buf, int len);
extern int os_write_file(int fd, const void *buf, int count);
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
#ifndef __SKAS_H
#define __SKAS_H
-#include "mm_id.h"
#include "sysdep/ptrace.h"
extern int userspace_pid[];
};
#define SYSCALL_ARGS(r) ((struct syscall_args) \
- { .args = { UPT_SYSCALL_ARG1(r), \
- UPT_SYSCALL_ARG2(r), \
- UPT_SYSCALL_ARG3(r), \
- UPT_SYSCALL_ARG4(r), \
- UPT_SYSCALL_ARG5(r), \
- UPT_SYSCALL_ARG6(r) } } )
+ { .args = { UPT_SYSCALL_ARG1(r), \
+ UPT_SYSCALL_ARG2(r), \
+ UPT_SYSCALL_ARG3(r), \
+ UPT_SYSCALL_ARG4(r), \
+ UPT_SYSCALL_ARG5(r), \
+ UPT_SYSCALL_ARG6(r) } } )
#define UPT_REG(regs, reg) \
({ unsigned long val; \
/*
- * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include "linux/slab.h"
+#include "linux/stddef.h"
+#include "linux/fs.h"
#include "linux/smp_lock.h"
#include "linux/ptrace.h"
-#include "linux/fs.h"
-#include "asm/ptrace.h"
-#include "asm/pgtable.h"
-#include "asm/tlbflush.h"
+#include "linux/sched.h"
+#include "asm/current.h"
+#include "asm/processor.h"
#include "asm/uaccess.h"
-#include "kern_util.h"
-#include "as-layout.h"
#include "mem_user.h"
-#include "kern.h"
-#include "irq_user.h"
-#include "tlb.h"
+#include "skas.h"
#include "os.h"
-#include "skas/skas.h"
void flush_thread(void)
{
arch_flush_thread(¤t->thread.arch);
ret = unmap(¤t->mm->context.skas.id, 0, end, 1, &data);
- if(ret){
- printk("flush_thread - clearing address space failed, "
+ if (ret) {
+ printk(KERN_ERR "flush_thread - clearing address space failed, "
"err = %d\n", ret);
force_sig(SIGKILL, current);
}
static long execve1(char *file, char __user * __user *argv,
char __user *__user *env)
{
- long error;
+ long error;
#ifdef CONFIG_TTY_LOG
struct tty_struct *tty;
log_exec(argv, tty);
mutex_unlock(&tty_mutex);
#endif
- error = do_execve(file, argv, env, ¤t->thread.regs);
- if (error == 0){
+ error = do_execve(file, argv, env, ¤t->thread.regs);
+ if (error == 0) {
task_lock(current);
- current->ptrace &= ~PT_DTRACE;
+ current->ptrace &= ~PT_DTRACE;
#ifdef SUBARCH_EXECVE1
SUBARCH_EXECVE1(¤t->thread.regs.regs);
#endif
task_unlock(current);
- }
- return(error);
+ }
+ return error;
}
long um_execve(char *file, char __user *__user *argv, char __user *__user *env)
long err;
err = execve1(file, argv, env);
- if(!err)
+ if (!err)
do_longjmp(current->thread.exec_buf, 1);
- return(err);
+ return err;
}
long sys_execve(char __user *file, char __user *__user *argv,
putname(filename);
out:
unlock_kernel();
- return(error);
+ return error;
}
/*
- * Copyright (C) 2000 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
* Derived (i.e. mostly copied) from arch/i386/kernel/irq.c:
* Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
*/
-#include "linux/kernel.h"
-#include "linux/module.h"
-#include "linux/smp.h"
-#include "linux/kernel_stat.h"
+#include "linux/cpumask.h"
+#include "linux/hardirq.h"
#include "linux/interrupt.h"
-#include "linux/random.h"
-#include "linux/slab.h"
-#include "linux/file.h"
-#include "linux/proc_fs.h"
-#include "linux/init.h"
+#include "linux/kernel_stat.h"
+#include "linux/module.h"
#include "linux/seq_file.h"
-#include "linux/profile.h"
-#include "linux/hardirq.h"
-#include "asm/irq.h"
-#include "asm/hw_irq.h"
-#include "asm/atomic.h"
-#include "asm/signal.h"
-#include "asm/system.h"
-#include "asm/errno.h"
-#include "asm/uaccess.h"
+#include "as-layout.h"
#include "kern_util.h"
-#include "irq_user.h"
-#include "irq_kern.h"
#include "os.h"
-#include "sigio.h"
-#include "misc_constants.h"
-#include "as-layout.h"
/*
* Generic, controller-independent functions:
seq_putc(p, '\n');
skip:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
- } else if (i == NR_IRQS) {
+ } else if (i == NR_IRQS)
seq_putc(p, '\n');
- }
return 0;
}
while (1) {
n = os_waiting_for_events(active_fds);
if (n <= 0) {
- if(n == -EINTR) continue;
+ if (n == -EINTR)
+ continue;
else break;
}
- for (irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next) {
+ for (irq_fd = active_fds; irq_fd != NULL;
+ irq_fd = irq_fd->next) {
if (irq_fd->current_events != 0) {
irq_fd->current_events = 0;
do_IRQ(irq_fd->irq, regs);
if (type == IRQ_READ)
events = UM_POLLIN | UM_POLLPRI;
- else
- events = UM_POLLOUT;
+ else events = UM_POLLOUT;
*new_fd = ((struct irq_fd) { .next = NULL,
.id = dev_id,
.fd = fd,
spin_lock_irqsave(&irq_lock, flags);
for (irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next) {
if ((irq_fd->fd == fd) && (irq_fd->type == type)) {
- printk("Registering fd %d twice\n", fd);
- printk("Irqs : %d, %d\n", irq_fd->irq, irq);
- printk("Ids : 0x%p, 0x%p\n", irq_fd->id, dev_id);
+ printk(KERN_ERR "Registering fd %d twice\n", fd);
+ printk(KERN_ERR "Irqs : %d, %d\n", irq_fd->irq, irq);
+ printk(KERN_ERR "Ids : 0x%p, 0x%p\n", irq_fd->id,
+ dev_id);
goto out_unlock;
}
}
if (n == 0)
break;
- /* n > 0
+ /*
+ * n > 0
* It means we couldn't put new pollfd to current pollfds
* and tmp_fds is NULL or too small for new pollfds array.
* Needed size is equal to n as minimum.
spin_unlock_irqrestore(&irq_lock, flags);
- /* This calls activate_fd, so it has to be outside the critical
+ /*
+ * This calls activate_fd, so it has to be outside the critical
* section.
*/
maybe_sigio_broken(fd, (type == IRQ_READ));
i++;
}
if (irq == NULL) {
- printk("find_irq_by_fd doesn't have descriptor %d\n", fd);
+ printk(KERN_ERR "find_irq_by_fd doesn't have descriptor %d\n",
+ fd);
goto out;
}
fdi = os_get_pollfd(i);
if ((fdi != -1) && (fdi != fd)) {
- printk("find_irq_by_fd - mismatch between active_fds and "
- "pollfds, fd %d vs %d, need %d\n", irq->fd,
+ printk(KERN_ERR "find_irq_by_fd - mismatch between active_fds "
+ "and pollfds, fd %d vs %d, need %d\n", irq->fd,
fdi, fd);
irq = NULL;
goto out;
spin_lock_irqsave(&irq_lock, flags);
irq = find_irq_by_fd(fd, irqnum, &i);
- if(irq == NULL){
+ if (irq == NULL) {
spin_unlock_irqrestore(&irq_lock, flags);
return;
}
EXPORT_SYMBOL(um_request_irq);
EXPORT_SYMBOL(reactivate_fd);
-/* hw_interrupt_type must define (startup || enable) &&
- * (shutdown || disable) && end */
+/*
+ * hw_interrupt_type must define (startup || enable) &&
+ * (shutdown || disable) && end
+ */
static void dummy(unsigned int irq)
{
}
err = os_pipe(fds, 1, 1);
if (err) {
- printk("init_aio_irq - os_pipe failed, err = %d\n", -err);
+ printk(KERN_ERR "init_aio_irq - os_pipe failed, err = %d\n",
+ -err);
goto out;
}
IRQF_DISABLED | IRQF_SAMPLE_RANDOM, name,
(void *) (long) fds[0]);
if (err) {
- printk("init_aio_irq - : um_request_irq failed, err = %d\n",
+ printk(KERN_ERR "init_aio_irq - : um_request_irq failed, "
+ "err = %d\n",
err);
goto out_close;
}
int nested;
mask = xchg(&pending_mask, *mask_out);
- if(mask != 0){
- /* If any interrupts come in at this point, we want to
+ if (mask != 0) {
+ /*
+ * If any interrupts come in at this point, we want to
* make sure that their bits aren't lost by our
* putting our bit in. So, this loop accumulates bits
* until xchg returns the same value that we put in.
do {
old |= mask;
mask = xchg(&pending_mask, old);
- } while(mask != old);
+ } while (mask != old);
return 1;
}
ti = current_thread_info();
nested = (ti->real_thread != NULL);
- if(!nested){
+ if (!nested) {
struct task_struct *task;
struct thread_info *tti;
err = os_map_memory((void *) virt, fd, offset, len, r, w, x);
if (err) {
if (err == -ENOMEM)
- printk("try increasing the host's "
+ printk(KERN_ERR "try increasing the host's "
"/proc/sys/vm/max_map_count to <physical "
"memory size>/4096\n");
panic("map_memory(0x%lx, %d, 0x%llx, %ld, %d, %d, %d) failed, "
exit(1);
}
- /* Special kludge - This page will be mapped in to userspace processes
+ /*
+ * Special kludge - This page will be mapped in to userspace processes
* from physmem_fd, so it needs to be written out there.
*/
os_seek_file(physmem_fd, __pa(&__syscall_stub_start));
err = os_map_memory((void *) iomem_start, region->fd, 0,
region->size, 1, 1, 0);
if (err)
- printk("Mapping iomem region for driver '%s' failed, "
- "errno = %d\n", region->driver, -err);
+ printk(KERN_ERR "Mapping iomem region for driver '%s' "
+ "failed, errno = %d\n", region->driver, -err);
else {
region->virt = iomem_start;
region->phys = __pa(region->virt);
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Copyright 2003 PathScale, Inc.
* Licensed under the GPL
*/
-#include "linux/kernel.h"
-#include "linux/sched.h"
-#include "linux/interrupt.h"
-#include "linux/string.h"
+#include "linux/stddef.h"
+#include "linux/err.h"
+#include "linux/hardirq.h"
#include "linux/mm.h"
-#include "linux/slab.h"
-#include "linux/utsname.h"
-#include "linux/fs.h"
-#include "linux/utime.h"
-#include "linux/smp_lock.h"
-#include "linux/module.h"
-#include "linux/init.h"
-#include "linux/capability.h"
-#include "linux/vmalloc.h"
-#include "linux/spinlock.h"
+#include "linux/personality.h"
#include "linux/proc_fs.h"
#include "linux/ptrace.h"
#include "linux/random.h"
-#include "linux/personality.h"
-#include "asm/unistd.h"
-#include "asm/mman.h"
-#include "asm/segment.h"
-#include "asm/stat.h"
+#include "linux/sched.h"
+#include "linux/threads.h"
#include "asm/pgtable.h"
-#include "asm/processor.h"
-#include "asm/tlbflush.h"
#include "asm/uaccess.h"
-#include "asm/user.h"
-#include "kern_util.h"
#include "as-layout.h"
-#include "kern.h"
-#include "signal_kern.h"
-#include "init.h"
-#include "irq_user.h"
-#include "mem_user.h"
-#include "tlb.h"
-#include "frame_kern.h"
-#include "sigcontext.h"
+#include "kern_util.h"
#include "os.h"
#include "skas.h"
+#include "tlb.h"
-/* This is a per-cpu array. A processor only modifies its entry and it only
+/*
+ * This is a per-cpu array. A processor only modifies its entry and it only
* cares about its entry, so it's OK if another processor is modifying its
* entry.
*/
static inline int external_pid(struct task_struct *task)
{
/* FIXME: Need to look up userspace_pid by cpu */
- return(userspace_pid[0]);
+ return userspace_pid[0];
}
int pid_to_processor_id(int pid)
{
int i;
- for(i = 0; i < ncpus; i++){
- if(cpu_tasks[i].pid == pid)
+ for(i = 0; i < ncpus; i++) {
+ if (cpu_tasks[i].pid == pid)
return i;
}
return -1;
current->thread.saved_task = NULL;
/* XXX need to check runqueues[cpu].idle */
- if(current->pid == 0)
+ if (current->pid == 0)
switch_timers(0);
switch_threads(&from->thread.switch_buf,
arch_switch_to(current->thread.prev_sched, current);
- if(current->pid == 0)
+ if (current->pid == 0)
switch_timers(1);
- if(current->thread.saved_task)
+ if (current->thread.saved_task)
show_regs(&(current->thread.regs));
next= current->thread.saved_task;
prev= current;
void interrupt_end(void)
{
- if(need_resched())
+ if (need_resched())
schedule();
- if(test_tsk_thread_flag(current, TIF_SIGPENDING))
+ if (test_tsk_thread_flag(current, TIF_SIGPENDING))
do_signal();
}
extern void schedule_tail(struct task_struct *prev);
-/* This is called magically, by its address being stuffed in a jmp_buf
+/*
+ * This is called magically, by its address being stuffed in a jmp_buf
* and being longjmp-d to.
*/
void new_thread_handler(void)
int (*fn)(void *), n;
void *arg;
- if(current->thread.prev_sched != NULL)
+ if (current->thread.prev_sched != NULL)
schedule_tail(current->thread.prev_sched);
current->thread.prev_sched = NULL;
fn = current->thread.request.u.thread.proc;
arg = current->thread.request.u.thread.arg;
- /* The return value is 1 if the kernel thread execs a process,
+ /*
+ * The return value is 1 if the kernel thread execs a process,
* 0 if it just exits
*/
n = run_kernel_thread(fn, arg, ¤t->thread.exec_buf);
- if(n == 1){
+ if (n == 1) {
/* Handle any immediate reschedules or signals */
interrupt_end();
userspace(¤t->thread.regs.regs);
void fork_handler(void)
{
force_flush_all();
- if(current->thread.prev_sched == NULL)
+ if (current->thread.prev_sched == NULL)
panic("blech");
schedule_tail(current->thread.prev_sched);
- /* XXX: if interrupt_end() calls schedule, this call to
+ /*
+ * XXX: if interrupt_end() calls schedule, this call to
* arch_switch_to isn't needed. We could want to apply this to
- * improve performance. -bb */
+ * improve performance. -bb
+ */
arch_switch_to(current->thread.prev_sched, current);
current->thread.prev_sched = NULL;
p->thread = (struct thread_struct) INIT_THREAD;
- if(current->thread.forking){
+ if (current->thread.forking) {
memcpy(&p->thread.regs.regs, ®s->regs,
sizeof(p->thread.regs.regs));
REGS_SET_SYSCALL_RETURN(p->thread.regs.regs.regs, 0);
- if(sp != 0)
+ if (sp != 0)
REGS_SP(p->thread.regs.regs.regs) = sp;
handler = fork_handler;
void default_idle(void)
{
- while(1){
+ while(1) {
/* endless idle loop with no priority at all */
/*
* although we are an idle CPU, we do not want to
* get into the scheduler unnecessarily.
*/
- if(need_resched())
+ if (need_resched())
schedule();
idle_sleep(10);
pte_t *pte;
pte_t ptent;
- if(task->mm == NULL)
+ if (task->mm == NULL)
return ERR_PTR(-EINVAL);
pgd = pgd_offset(task->mm, addr);
- if(!pgd_present(*pgd))
+ if (!pgd_present(*pgd))
return ERR_PTR(-EINVAL);
pud = pud_offset(pgd, addr);
- if(!pud_present(*pud))
+ if (!pud_present(*pud))
return ERR_PTR(-EINVAL);
pmd = pmd_offset(pud, addr);
- if(!pmd_present(*pmd))
+ if (!pmd_present(*pmd))
return ERR_PTR(-EINVAL);
pte = pte_offset_kernel(pmd, addr);
ptent = *pte;
- if(!pte_present(ptent))
+ if (!pte_present(ptent))
return ERR_PTR(-EINVAL);
- if(pte_out != NULL)
+ if (pte_out != NULL)
*pte_out = ptent;
return (void *) (pte_val(ptent) & PAGE_MASK) + (addr & ~PAGE_MASK);
}
#ifdef CONFIG_SMP
int cpu = current_thread->cpu;
IPI_handler(cpu);
- if(cpu != 0)
+ if (cpu != 0)
return 1;
#endif
return 0;
static int proc_read_sysemu(char *buf, char **start, off_t offset, int size,int *eof, void *data)
{
- if (snprintf(buf, size, "%d\n", get_using_sysemu()) < size) /*No overflow*/
+ if (snprintf(buf, size, "%d\n", get_using_sysemu()) < size)
+ /* No overflow */
*eof = 1;
return strlen(buf);
if (tmp[0] >= '0' && tmp[0] <= '2')
set_using_sysemu(tmp[0] - '0');
- return count; /*We use the first char, but pretend to write everything*/
+ /* We use the first char, but pretend to write everything */
+ return count;
}
int __init make_proc_sysemu(void)
struct task_struct *task = t ? t : current;
if ( ! (task->ptrace & PT_DTRACE) )
- return(0);
+ return 0;
if (task->thread.singlestep_syscall)
- return(1);
+ return 1;
return 2;
}
-/*
- * Copyright (C) 2000 Jeff Dike (jdike@karaya.com)
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include "linux/sched.h"
-#include "linux/mm.h"
-#include "linux/errno.h"
-#include "linux/smp_lock.h"
-#include "linux/security.h"
-#include "linux/ptrace.h"
#include "linux/audit.h"
+#include "linux/ptrace.h"
+#include "linux/sched.h"
+#include "asm/uaccess.h"
#ifdef CONFIG_PROC_MM
-#include "linux/proc_mm.h"
+#include "proc_mm.h"
#endif
-#include "asm/ptrace.h"
-#include "asm/uaccess.h"
-#include "kern_util.h"
#include "skas_ptrace.h"
-#include "sysdep/ptrace.h"
-#include "os.h"
static inline void set_singlestepping(struct task_struct *child, int on)
{
- if (on)
- child->ptrace |= PT_DTRACE;
- else
- child->ptrace &= ~PT_DTRACE;
- child->thread.singlestep_syscall = 0;
+ if (on)
+ child->ptrace |= PT_DTRACE;
+ else
+ child->ptrace &= ~PT_DTRACE;
+ child->thread.singlestep_syscall = 0;
#ifdef SUBARCH_SET_SINGLESTEPPING
- SUBARCH_SET_SINGLESTEPPING(child, on);
+ SUBARCH_SET_SINGLESTEPPING(child, on);
#endif
}
* Called by kernel/ptrace.c when detaching..
*/
void ptrace_disable(struct task_struct *child)
-{
- set_singlestepping(child,0);
+{
+ set_singlestepping(child,0);
}
extern int peek_user(struct task_struct * child, long addr, long data);
unsigned long __user *p = (void __user *)(unsigned long)data;
switch (request) {
- /* when I and D space are separate, these will need to be fixed. */
- case PTRACE_PEEKTEXT: /* read word at location addr. */
+ /* read word at location addr. */
+ case PTRACE_PEEKTEXT:
case PTRACE_PEEKDATA:
ret = generic_ptrace_peekdata(child, addr, data);
break;
/* read the word at location addr in the USER area. */
- case PTRACE_PEEKUSR:
- ret = peek_user(child, addr, data);
- break;
+ case PTRACE_PEEKUSR:
+ ret = peek_user(child, addr, data);
+ break;
- /* when I and D space are separate, this will have to be fixed. */
- case PTRACE_POKETEXT: /* write the word at location addr. */
+ /* write the word at location addr. */
+ case PTRACE_POKETEXT:
case PTRACE_POKEDATA:
ret = generic_ptrace_pokedata(child, addr, data);
break;
- case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
- ret = poke_user(child, addr, data);
- break;
+ /* write the word at location addr in the USER area */
+ case PTRACE_POKEUSR:
+ ret = poke_user(child, addr, data);
+ break;
- case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
- case PTRACE_CONT: { /* restart after signal. */
+ /* continue and stop at next (return from) syscall */
+ case PTRACE_SYSCALL:
+ /* restart after signal. */
+ case PTRACE_CONT: {
ret = -EIO;
if (!valid_signal(data))
break;
- set_singlestepping(child, 0);
- if (request == PTRACE_SYSCALL) {
+ set_singlestepping(child, 0);
+ if (request == PTRACE_SYSCALL)
set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- }
- else {
- clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- }
+ else clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
child->exit_code = data;
wake_up_process(child);
ret = 0;
}
/*
- * make the child exit. Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
+ * make the child exit. Best I can do is send it a sigkill.
+ * perhaps it should be put in the status that it wants to
* exit.
*/
case PTRACE_KILL: {
if (child->exit_state == EXIT_ZOMBIE) /* already dead */
break;
- set_singlestepping(child, 0);
+ set_singlestepping(child, 0);
child->exit_code = SIGKILL;
wake_up_process(child);
break;
if (!valid_signal(data))
break;
clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- set_singlestepping(child, 1);
+ set_singlestepping(child, 1);
child->exit_code = data;
/* give it a chance to run. */
wake_up_process(child);
break;
case PTRACE_FAULTINFO: {
- /* Take the info from thread->arch->faultinfo,
+ /*
+ * Take the info from thread->arch->faultinfo,
* but transfer max. sizeof(struct ptrace_faultinfo).
* On i386, ptrace_faultinfo is smaller!
*/
ret = copy_to_user(p, &child->thread.arch.faultinfo,
sizeof(struct ptrace_faultinfo));
- if(ret)
+ if (ret)
break;
break;
}
case PTRACE_LDT: {
struct ptrace_ldt ldt;
- if(copy_from_user(&ldt, p, sizeof(ldt))){
+ if (copy_from_user(&ldt, p, sizeof(ldt))) {
ret = -EIO;
break;
}
- /* This one is confusing, so just punt and return -EIO for
+ /*
+ * This one is confusing, so just punt and return -EIO for
* now
*/
ret = -EIO;
struct mm_struct *old = child->mm;
struct mm_struct *new = proc_mm_get_mm(data);
- if(IS_ERR(new)){
+ if (IS_ERR(new)) {
ret = PTR_ERR(new);
break;
}
}
#endif
#ifdef PTRACE_ARCH_PRCTL
- case PTRACE_ARCH_PRCTL:
- /* XXX Calls ptrace on the host - needs some SMP thinking */
- ret = arch_prctl(child, data, (void *) addr);
- break;
+ case PTRACE_ARCH_PRCTL:
+ /* XXX Calls ptrace on the host - needs some SMP thinking */
+ ret = arch_prctl(child, data, (void *) addr);
+ break;
#endif
default:
ret = ptrace_request(child, request, addr, data);
force_sig_info(SIGTRAP, &info, tsk);
}
-/* XXX Check PT_DTRACE vs TIF_SINGLESTEP for singlestepping check and
+/*
+ * XXX Check PT_DTRACE vs TIF_SINGLESTEP for singlestepping check and
* PT_PTRACED vs TIF_SYSCALL_TRACE for syscall tracing check
*/
void syscall_trace(struct uml_pt_regs *regs, int entryexit)
UPT_SYSCALL_ARG3(regs),
UPT_SYSCALL_ARG4(regs));
else audit_syscall_exit(AUDITSC_RESULT(UPT_SYSCALL_RET(regs)),
- UPT_SYSCALL_RET(regs));
+ UPT_SYSCALL_RET(regs));
}
/* Fake a debug trap */
if (!(current->ptrace & PT_PTRACED))
return;
- /* the 0x80 provides a way for the tracing parent to distinguish
- between a syscall stop and SIGTRAP delivery */
+ /*
+ * the 0x80 provides a way for the tracing parent to distinguish
+ * between a syscall stop and SIGTRAP delivery
+ */
tracesysgood = (current->ptrace & PT_TRACESYSGOOD);
ptrace_notify(SIGTRAP | (tracesysgood ? 0x80 : 0));
if (entryexit) /* force do_signal() --> is_syscall() */
set_thread_flag(TIF_SIGPENDING);
- /* this isn't the same as continuing with a signal, but it will do
+ /*
+ * this isn't the same as continuing with a signal, but it will do
* for normal use. strace only continues with a signal if the
* stopping signal is not SIGTRAP. -brl
*/
/*
- * Copyright (C) 2000, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include "linux/module.h"
#include "linux/sched.h"
-#include "asm/smp.h"
-#include "kern_util.h"
-#include "kern.h"
#include "os.h"
#include "skas.h"
void uml_cleanup(void)
{
- kmalloc_ok = 0;
+ kmalloc_ok = 0;
do_uml_exitcalls();
kill_off_processes();
}
void machine_restart(char * __unused)
{
- uml_cleanup();
+ uml_cleanup();
reboot_skas();
}
void machine_power_off(void)
{
- uml_cleanup();
+ uml_cleanup();
halt_skas();
}
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include "linux/stddef.h"
-#include "linux/sys.h"
-#include "linux/sched.h"
-#include "linux/wait.h"
-#include "linux/kernel.h"
-#include "linux/smp_lock.h"
#include "linux/module.h"
-#include "linux/slab.h"
-#include "linux/tty.h"
-#include "linux/binfmts.h"
#include "linux/ptrace.h"
+#include "linux/sched.h"
+#include "asm/siginfo.h"
#include "asm/signal.h"
-#include "asm/uaccess.h"
#include "asm/unistd.h"
-#include "asm/ucontext.h"
-#include "kern_util.h"
-#include "signal_kern.h"
-#include "kern.h"
#include "frame_kern.h"
+#include "kern_util.h"
#include "sigcontext.h"
EXPORT_SYMBOL(block_signals);
current_thread_info()->restart_block.fn = do_no_restart_syscall;
/* Did we come from a system call? */
- if(PT_REGS_SYSCALL_NR(regs) >= 0){
+ if (PT_REGS_SYSCALL_NR(regs) >= 0) {
/* If so, check system call restarting.. */
- switch(PT_REGS_SYSCALL_RET(regs)){
+ switch(PT_REGS_SYSCALL_RET(regs)) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
PT_REGS_SYSCALL_RET(regs) = -EINTR;
}
sp = PT_REGS_SP(regs);
- if((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags(sp) == 0))
+ if ((ka->sa.sa_flags & SA_ONSTACK) && (sas_ss_flags(sp) == 0))
sp = current->sas_ss_sp + current->sas_ss_size;
#ifdef CONFIG_ARCH_HAS_SC_SIGNALS
- if(!(ka->sa.sa_flags & SA_SIGINFO))
+ if (!(ka->sa.sa_flags & SA_SIGINFO))
err = setup_signal_stack_sc(sp, signr, ka, regs, oldset);
else
#endif
err = setup_signal_stack_si(sp, signr, ka, regs, info, oldset);
- if(err){
+ if (err) {
spin_lock_irq(¤t->sighand->siglock);
current->blocked = *oldset;
recalc_sigpending();
spin_lock_irq(¤t->sighand->siglock);
sigorsets(¤t->blocked, ¤t->blocked,
&ka->sa.sa_mask);
- if(!(ka->sa.sa_flags & SA_NODEFER))
+ if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(¤t->blocked, signr);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
else
oldset = ¤t->blocked;
- while((sig = get_signal_to_deliver(&info, &ka_copy, regs, NULL)) > 0){
+ while ((sig = get_signal_to_deliver(&info, &ka_copy, regs, NULL)) > 0) {
handled_sig = 1;
/* Whee! Actually deliver the signal. */
- if(!handle_signal(regs, sig, &ka_copy, &info, oldset)){
- /* a signal was successfully delivered; the saved
+ if (!handle_signal(regs, sig, &ka_copy, &info, oldset)) {
+ /*
+ * a signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
- * clear the TIF_RESTORE_SIGMASK flag */
+ * clear the TIF_RESTORE_SIGMASK flag
+ */
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
break;
}
/* Did we come from a system call? */
- if(!handled_sig && (PT_REGS_SYSCALL_NR(regs) >= 0)){
+ if (!handled_sig && (PT_REGS_SYSCALL_NR(regs) >= 0)) {
/* Restart the system call - no handlers present */
- switch(PT_REGS_SYSCALL_RET(regs)){
+ switch(PT_REGS_SYSCALL_RET(regs)) {
case -ERESTARTNOHAND:
case -ERESTARTSYS:
case -ERESTARTNOINTR:
PT_REGS_ORIG_SYSCALL(regs) = __NR_restart_syscall;
PT_REGS_RESTART_SYSCALL(regs);
break;
- }
+ }
}
- /* This closes a way to execute a system call on the host. If
+ /*
+ * This closes a way to execute a system call on the host. If
* you set a breakpoint on a system call instruction and singlestep
* from it, the tracing thread used to PTRACE_SINGLESTEP the process
* rather than PTRACE_SYSCALL it, allowing the system call to execute
* on the host. The tracing thread will check this flag and
* PTRACE_SYSCALL if necessary.
*/
- if(current->ptrace & PT_DTRACE)
+ if (current->ptrace & PT_DTRACE)
current->thread.singlestep_syscall =
is_syscall(PT_REGS_IP(¤t->thread.regs));
- /* if there's no signal to deliver, we just put the saved sigmask
- * back */
+ /*
+ * if there's no signal to deliver, we just put the saved sigmask
+ * back
+ */
if (!handled_sig && test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
#
-# Copyright (C) 2002 - 2004 Jeff Dike (jdike@addtoit.com)
+# Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
# Licensed under the GPL
#
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+/*
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include "linux/sched.h"
-#include "linux/list.h"
-#include "linux/spinlock.h"
-#include "linux/slab.h"
-#include "linux/errno.h"
#include "linux/mm.h"
-#include "asm/current.h"
-#include "asm/segment.h"
-#include "asm/mmu.h"
+#include "linux/sched.h"
#include "asm/pgalloc.h"
#include "asm/pgtable.h"
-#include "asm/ldt.h"
#include "os.h"
#include "skas.h"
if (!pte)
goto out_pte;
- /* There's an interaction between the skas0 stub pages, stack
+ /*
+ * There's an interaction between the skas0 stub pages, stack
* randomization, and the BUG at the end of exit_mmap. exit_mmap
- * checks that the number of page tables freed is the same as had
- * been allocated. If the stack is on the last page table page,
+ * checks that the number of page tables freed is the same as had
+ * been allocated. If the stack is on the last page table page,
* then the stack pte page will be freed, and if not, it won't. To
* avoid having to know where the stack is, or if the process mapped
* something at the top of its address space for some other reason,
* destroy_context_skas.
*/
- mm->context.skas.last_page_table = pmd_page_vaddr(*pmd);
+ mm->context.skas.last_page_table = pmd_page_vaddr(*pmd);
#ifdef CONFIG_3_LEVEL_PGTABLES
- mm->context.skas.last_pmd = (unsigned long) __va(pud_val(*pud));
+ mm->context.skas.last_pmd = (unsigned long) __va(pud_val(*pud));
#endif
*pte = mk_pte(virt_to_page(kernel), __pgprot(_PAGE_PRESENT));
*pte = pte_mkread(*pte);
- return(0);
+ return 0;
out_pmd:
pud_free(pud);
out_pte:
pmd_free(pmd);
out:
- return(-ENOMEM);
+ return -ENOMEM;
}
int init_new_context(struct task_struct *task, struct mm_struct *mm)
{
- struct mmu_context_skas *from_mm = NULL;
+ struct mmu_context_skas *from_mm = NULL;
struct mmu_context_skas *to_mm = &mm->context.skas;
unsigned long stack = 0;
int ret = -ENOMEM;
- if(skas_needs_stub){
+ if (skas_needs_stub) {
stack = get_zeroed_page(GFP_KERNEL);
- if(stack == 0)
+ if (stack == 0)
goto out;
- /* This zeros the entry that pgd_alloc didn't, needed since
+ /*
+ * This zeros the entry that pgd_alloc didn't, needed since
* we are about to reinitialize it, and want mm.nr_ptes to
* be accurate.
*/
ret = init_stub_pte(mm, CONFIG_STUB_CODE,
(unsigned long) &__syscall_stub_start);
- if(ret)
+ if (ret)
goto out_free;
ret = init_stub_pte(mm, CONFIG_STUB_DATA, stack);
- if(ret)
+ if (ret)
goto out_free;
mm->nr_ptes--;
}
to_mm->id.stack = stack;
- if(current->mm != NULL && current->mm != &init_mm)
+ if (current->mm != NULL && current->mm != &init_mm)
from_mm = ¤t->mm->context.skas;
- if(proc_mm){
+ if (proc_mm) {
ret = new_mm(stack);
- if(ret < 0){
- printk("init_new_context_skas - new_mm failed, "
- "errno = %d\n", ret);
+ if (ret < 0) {
+ printk(KERN_ERR "init_new_context_skas - "
+ "new_mm failed, errno = %d\n", ret);
goto out_free;
}
to_mm->id.u.mm_fd = ret;
}
else {
- if(from_mm)
+ if (from_mm)
to_mm->id.u.pid = copy_context_skas0(stack,
from_mm->id.u.pid);
else to_mm->id.u.pid = start_userspace(stack);
}
ret = init_new_ldt(to_mm, from_mm);
- if(ret < 0){
- printk("init_new_context_skas - init_ldt"
+ if (ret < 0) {
+ printk(KERN_ERR "init_new_context_skas - init_ldt"
" failed, errno = %d\n", ret);
goto out_free;
}
return 0;
out_free:
- if(to_mm->id.stack != 0)
+ if (to_mm->id.stack != 0)
free_page(to_mm->id.stack);
out:
return ret;
{
struct mmu_context_skas *mmu = &mm->context.skas;
- if(proc_mm)
+ if (proc_mm)
os_close_file(mmu->id.u.mm_fd);
else
os_kill_ptraced_process(mmu->id.u.pid, 1);
- if(!proc_mm || !ptrace_faultinfo){
+ if (!proc_mm || !ptrace_faultinfo) {
free_page(mmu->id.stack);
pte_lock_deinit(virt_to_page(mmu->last_page_table));
pte_free_kernel((pte_t *) mmu->last_page_table);
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include "linux/sched.h"
-#include "linux/slab.h"
-#include "linux/ptrace.h"
-#include "linux/proc_fs.h"
-#include "linux/file.h"
-#include "linux/errno.h"
#include "linux/init.h"
-#include "asm/uaccess.h"
-#include "asm/atomic.h"
-#include "kern_util.h"
+#include "linux/sched.h"
#include "as-layout.h"
-#include "skas.h"
#include "os.h"
-#include "tlb.h"
-#include "kern.h"
-#include "registers.h"
-
-extern void schedule_tail(struct task_struct *prev);
+#include "skas.h"
int new_mm(unsigned long stack)
{
int fd;
fd = os_open_file("/proc/mm", of_cloexec(of_write(OPENFLAGS())), 0);
- if(fd < 0)
+ if (fd < 0)
return fd;
- if(skas_needs_stub)
+ if (skas_needs_stub)
map_stub_pages(fd, CONFIG_STUB_CODE, CONFIG_STUB_DATA, stack);
return fd;
{
stack_protections((unsigned long) &cpu0_irqstack);
set_sigstack(cpu0_irqstack, THREAD_SIZE);
- if(proc_mm)
+ if (proc_mm)
userspace_pid[0] = start_userspace(0);
init_new_thread_signals();
unsigned long current_stub_stack(void)
{
- if(current->mm == NULL)
+ if (current->mm == NULL)
return 0;
return current->mm->context.skas.id.stack;
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include "linux/sys.h"
+#include "linux/kernel.h"
#include "linux/ptrace.h"
-#include "asm/errno.h"
-#include "asm/unistd.h"
-#include "asm/ptrace.h"
-#include "asm/current.h"
-#include "sysdep/syscalls.h"
#include "kern_util.h"
-#include "syscall.h"
+#include "sysdep/ptrace.h"
+#include "sysdep/syscalls.h"
void handle_syscall(struct uml_pt_regs *r)
{
current->thread.nsyscalls++;
nsyscalls++;
- /* This should go in the declaration of syscall, but when I do that,
+ /*
+ * This should go in the declaration of syscall, but when I do that,
* strace -f -c bash -c 'ls ; ls' breaks, sometimes not tracing
* children at all, sometimes hanging when bash doesn't see the first
* ls exit.
* in case it's a compiler bug.
*/
syscall = UPT_SYSCALL_NR(r);
- if((syscall >= NR_syscalls) || (syscall < 0))
+ if ((syscall >= NR_syscalls) || (syscall < 0))
result = -ENOSYS;
else result = EXECUTE_SYSCALL(syscall, regs);
/*
- * Copyright (C) 2000 - 2003 Jeff Dike (jdike@addtoit.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include "linux/sched.h"
#include "linux/file.h"
-#include "linux/smp_lock.h"
-#include "linux/mm.h"
#include "linux/fs.h"
+#include "linux/mm.h"
+#include "linux/sched.h"
#include "linux/utsname.h"
-#include "linux/msg.h"
-#include "linux/shm.h"
-#include "linux/sys.h"
-#include "linux/syscalls.h"
-#include "linux/unistd.h"
-#include "linux/slab.h"
-#include "linux/utime.h"
+#include "asm/current.h"
#include "asm/mman.h"
#include "asm/uaccess.h"
-#include "kern_util.h"
-#include "sysdep/syscalls.h"
+#include "asm/unistd.h"
/* Unlocked, I don't care if this is a bit off */
int nsyscalls = 0;
ret = do_fork(SIGCHLD, UPT_SP(¤t->thread.regs.regs),
¤t->thread.regs, 0, NULL, NULL);
current->thread.forking = 0;
- return(ret);
+ return ret;
}
long sys_vfork(void)
UPT_SP(¤t->thread.regs.regs),
¤t->thread.regs, 0, NULL, NULL);
current->thread.forking = 0;
- return(ret);
+ return ret;
}
/* common code for old and new mmaps */
*/
long sys_pipe(unsigned long __user * fildes)
{
- int fd[2];
- long error;
+ int fd[2];
+ long error;
- error = do_pipe(fd);
- if (!error) {
+ error = do_pipe(fd);
+ if (!error) {
if (copy_to_user(fildes, fd, sizeof(fd)))
- error = -EFAULT;
- }
- return error;
+ error = -EFAULT;
+ }
+ return error;
}
if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
return -EFAULT;
- down_read(&uts_sem);
+ down_read(&uts_sem);
error = __copy_to_user(&name->sysname, &utsname()->sysname,
__OLD_UTS_LEN);
/*
- * Copyright (C) 2000 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include "linux/kernel.h"
-#include "linux/module.h"
-#include "linux/unistd.h"
-#include "linux/stddef.h"
-#include "linux/spinlock.h"
-#include "linux/time.h"
-#include "linux/sched.h"
#include "linux/interrupt.h"
-#include "linux/init.h"
-#include "linux/delay.h"
-#include "linux/hrtimer.h"
+#include "linux/jiffies.h"
+#include "linux/threads.h"
#include "asm/irq.h"
#include "asm/param.h"
-#include "asm/current.h"
#include "kern_util.h"
#include "os.h"
int hz(void)
{
- return(HZ);
+ return HZ;
}
/*
unsigned long long ticks = 0;
#ifdef CONFIG_UML_REAL_TIME_CLOCK
int c = cpu();
- if(prev_nsecs[c]){
+ if (prev_nsecs[c]) {
/* We've had 1 tick */
unsigned long long nsecs = os_nsecs();
prev_nsecs[c] = nsecs;
/* Protect against the host clock being set backwards */
- if(delta[c] < 0)
+ if (delta[c] < 0)
delta[c] = 0;
ticks += (delta[c] * HZ) / BILLION;
#else
ticks = 1;
#endif
- while(ticks > 0){
+ while (ticks > 0) {
do_IRQ(TIMER_IRQ, regs);
ticks--;
}
int err;
err = request_irq(TIMER_IRQ, um_timer, IRQF_DISABLED, "timer", NULL);
- if(err != 0)
+ if (err != 0)
printk(KERN_ERR "register_timer : request_irq failed - "
"errno = %d\n", -err);
err = set_interval(1);
- if(err != 0)
+ if (err != 0)
printk(KERN_ERR "register_timer : set_interval failed - "
"errno = %d\n", -err);
}
xtime.tv_nsec;
#endif
tv->tv_sec = nsecs / NSEC_PER_SEC;
- /* Careful about calculations here - this was originally done as
+ /*
+ * Careful about calculations here - this was originally done as
* (nsecs - tv->tv_sec * NSEC_PER_SEC) / NSEC_PER_USEC
* which gave bogus (> 1000000) values. Dunno why, suspect gcc
* (4.0.0) miscompiled it, or there's a subtle 64/32-bit conversion
void timer_handler(int sig, struct uml_pt_regs *regs)
{
- if(current_thread->cpu == 0)
+ if (current_thread->cpu == 0)
timer_irq(regs);
local_irq_disable();
irq_enter();
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
#include "linux/mm.h"
-#include "asm/page.h"
-#include "asm/pgalloc.h"
#include "asm/pgtable.h"
#include "asm/tlbflush.h"
#include "as-layout.h"
-#include "tlb.h"
-#include "mem.h"
#include "mem_user.h"
#include "os.h"
#include "skas.h"
+#include "tlb.h"
static int add_mmap(unsigned long virt, unsigned long phys, unsigned long len,
unsigned int prot, struct host_vm_op *ops, int *index,
int fd, ret = 0;
fd = phys_mapping(phys, &offset);
- if(*index != -1){
+ if (*index != -1) {
last = &ops[*index];
- if((last->type == MMAP) &&
+ if ((last->type == MMAP) &&
(last->u.mmap.addr + last->u.mmap.len == virt) &&
(last->u.mmap.prot == prot) && (last->u.mmap.fd == fd) &&
- (last->u.mmap.offset + last->u.mmap.len == offset)){
+ (last->u.mmap.offset + last->u.mmap.len == offset)) {
last->u.mmap.len += len;
return 0;
}
}
- if(*index == last_filled){
+ if (*index == last_filled) {
ret = (*do_ops)(mmu, ops, last_filled, 0, flush);
*index = -1;
}
struct host_vm_op *last;
int ret = 0;
- if(*index != -1){
+ if (*index != -1) {
last = &ops[*index];
- if((last->type == MUNMAP) &&
- (last->u.munmap.addr + last->u.mmap.len == addr)){
+ if ((last->type == MUNMAP) &&
+ (last->u.munmap.addr + last->u.mmap.len == addr)) {
last->u.munmap.len += len;
return 0;
}
}
- if(*index == last_filled){
+ if (*index == last_filled) {
ret = (*do_ops)(mmu, ops, last_filled, 0, flush);
*index = -1;
}
struct host_vm_op *last;
int ret = 0;
- if(*index != -1){
+ if (*index != -1) {
last = &ops[*index];
- if((last->type == MPROTECT) &&
+ if ((last->type == MPROTECT) &&
(last->u.mprotect.addr + last->u.mprotect.len == addr) &&
- (last->u.mprotect.prot == prot)){
+ (last->u.mprotect.prot == prot)) {
last->u.mprotect.len += len;
return 0;
}
}
- if(*index == last_filled){
+ if (*index == last_filled) {
ret = (*do_ops)(mmu, ops, last_filled, 0, flush);
*index = -1;
}
}
prot = ((r ? UM_PROT_READ : 0) | (w ? UM_PROT_WRITE : 0) |
(x ? UM_PROT_EXEC : 0));
- if(force || pte_newpage(*pte)){
- if(pte_present(*pte))
+ if (force || pte_newpage(*pte)) {
+ if (pte_present(*pte))
ret = add_mmap(addr, pte_val(*pte) & PAGE_MASK,
PAGE_SIZE, prot, ops, op_index,
last_op, mmu, flush, do_ops);
else ret = add_munmap(addr, PAGE_SIZE, ops, op_index,
last_op, mmu, flush, do_ops);
}
- else if(pte_newprot(*pte))
+ else if (pte_newprot(*pte))
ret = add_mprotect(addr, PAGE_SIZE, prot, ops, op_index,
last_op, mmu, flush, do_ops);
*pte = pte_mkuptodate(*pte);
pmd = pmd_offset(pud, addr);
do {
next = pmd_addr_end(addr, end);
- if(!pmd_present(*pmd)){
- if(force || pmd_newpage(*pmd)){
+ if (!pmd_present(*pmd)) {
+ if (force || pmd_newpage(*pmd)) {
ret = add_munmap(addr, next - addr, ops,
op_index, last_op, mmu,
flush, do_ops);
pud = pud_offset(pgd, addr);
do {
next = pud_addr_end(addr, end);
- if(!pud_present(*pud)){
- if(force || pud_newpage(*pud)){
+ if (!pud_present(*pud)) {
+ if (force || pud_newpage(*pud)) {
ret = add_munmap(addr, next - addr, ops,
op_index, last_op, mmu,
flush, do_ops);
pgd = pgd_offset(mm, addr);
do {
next = pgd_addr_end(addr, end_addr);
- if(!pgd_present(*pgd)){
- if (force || pgd_newpage(*pgd)){
+ if (!pgd_present(*pgd)) {
+ if (force || pgd_newpage(*pgd)) {
ret = add_munmap(addr, next - addr, ops,
&op_index, last_op, mmu,
&flush, do_ops);
do_ops);
} while (pgd++, addr = next, ((addr != end_addr) && !ret));
- if(!ret)
+ if (!ret)
ret = (*do_ops)(mmu, ops, op_index, 1, &flush);
/* This is not an else because ret is modified above */
- if(ret) {
- printk("fix_range_common: failed, killing current process\n");
+ if (ret) {
+ printk(KERN_ERR "fix_range_common: failed, killing current "
+ "process\n");
force_sig(SIGKILL, current);
}
}
int updated = 0, err;
mm = &init_mm;
- for(addr = start; addr < end;){
+ for (addr = start; addr < end;) {
pgd = pgd_offset(mm, addr);
- if(!pgd_present(*pgd)){
+ if (!pgd_present(*pgd)) {
last = ADD_ROUND(addr, PGDIR_SIZE);
- if(last > end)
+ if (last > end)
last = end;
- if(pgd_newpage(*pgd)){
+ if (pgd_newpage(*pgd)) {
updated = 1;
err = os_unmap_memory((void *) addr,
last - addr);
- if(err < 0)
+ if (err < 0)
panic("munmap failed, errno = %d\n",
-err);
}
}
pud = pud_offset(pgd, addr);
- if(!pud_present(*pud)){
+ if (!pud_present(*pud)) {
last = ADD_ROUND(addr, PUD_SIZE);
- if(last > end)
+ if (last > end)
last = end;
- if(pud_newpage(*pud)){
+ if (pud_newpage(*pud)) {
updated = 1;
err = os_unmap_memory((void *) addr,
last - addr);
- if(err < 0)
+ if (err < 0)
panic("munmap failed, errno = %d\n",
-err);
}
}
pmd = pmd_offset(pud, addr);
- if(!pmd_present(*pmd)){
+ if (!pmd_present(*pmd)) {
last = ADD_ROUND(addr, PMD_SIZE);
- if(last > end)
+ if (last > end)
last = end;
- if(pmd_newpage(*pmd)){
+ if (pmd_newpage(*pmd)) {
updated = 1;
err = os_unmap_memory((void *) addr,
last - addr);
- if(err < 0)
+ if (err < 0)
panic("munmap failed, errno = %d\n",
-err);
}
}
pte = pte_offset_kernel(pmd, addr);
- if(!pte_present(*pte) || pte_newpage(*pte)){
+ if (!pte_present(*pte) || pte_newpage(*pte)) {
updated = 1;
err = os_unmap_memory((void *) addr,
PAGE_SIZE);
- if(err < 0)
+ if (err < 0)
panic("munmap failed, errno = %d\n",
-err);
- if(pte_present(*pte))
+ if (pte_present(*pte))
map_memory(addr,
pte_val(*pte) & PAGE_MASK,
PAGE_SIZE, 1, 1, 1);
}
- else if(pte_newprot(*pte)){
+ else if (pte_newprot(*pte)) {
updated = 1;
os_protect_memory((void *) addr, PAGE_SIZE, 1, 1, 1);
}
addr += PAGE_SIZE;
}
- return(updated);
+ return updated;
}
void flush_tlb_page(struct vm_area_struct *vma, unsigned long address)
address &= PAGE_MASK;
pgd = pgd_offset(mm, address);
- if(!pgd_present(*pgd))
+ if (!pgd_present(*pgd))
goto kill;
pud = pud_offset(pgd, address);
- if(!pud_present(*pud))
+ if (!pud_present(*pud))
goto kill;
pmd = pmd_offset(pud, address);
- if(!pmd_present(*pmd))
+ if (!pmd_present(*pmd))
goto kill;
pte = pte_offset_kernel(pmd, address);
mm_id = &mm->context.skas.id;
prot = ((r ? UM_PROT_READ : 0) | (w ? UM_PROT_WRITE : 0) |
(x ? UM_PROT_EXEC : 0));
- if(pte_newpage(*pte)){
- if(pte_present(*pte)){
+ if (pte_newpage(*pte)) {
+ if (pte_present(*pte)) {
unsigned long long offset;
int fd;
}
else err = unmap(mm_id, address, PAGE_SIZE, 1, &flush);
}
- else if(pte_newprot(*pte))
+ else if (pte_newprot(*pte))
err = protect(mm_id, address, PAGE_SIZE, prot, 1, &flush);
- if(err)
+ if (err)
goto kill;
*pte = pte_mkuptodate(*pte);
return;
kill:
- printk("Failed to flush page for address 0x%lx\n", address);
+ printk(KERN_ERR "Failed to flush page for address 0x%lx\n", address);
force_sig(SIGKILL, current);
}
pgd_t *pgd_offset_proc(struct mm_struct *mm, unsigned long address)
{
- return(pgd_offset(mm, address));
+ return pgd_offset(mm, address);
}
pud_t *pud_offset_proc(pgd_t *pgd, unsigned long address)
{
- return(pud_offset(pgd, address));
+ return pud_offset(pgd, address);
}
pmd_t *pmd_offset_proc(pud_t *pud, unsigned long address)
{
- return(pmd_offset(pud, address));
+ return pmd_offset(pud, address);
}
pte_t *pte_offset_proc(pmd_t *pmd, unsigned long address)
{
- return(pte_offset_kernel(pmd, address));
+ return pte_offset_kernel(pmd, address);
}
pte_t *addr_pte(struct task_struct *task, unsigned long addr)
pud_t *pud = pud_offset(pgd, addr);
pmd_t *pmd = pmd_offset(pud, addr);
- return(pte_offset_map(pmd, addr));
+ return pte_offset_map(pmd, addr);
}
void flush_tlb_all(void)
void __flush_tlb_one(unsigned long addr)
{
- flush_tlb_kernel_range_common(addr, addr + PAGE_SIZE);
+ flush_tlb_kernel_range_common(addr, addr + PAGE_SIZE);
}
static int do_ops(union mm_context *mmu, struct host_vm_op *ops, int last,
int finished, void **flush)
{
struct host_vm_op *op;
- int i, ret = 0;
+ int i, ret = 0;
- for(i = 0; i <= last && !ret; i++){
- op = &ops[i];
- switch(op->type){
+ for (i = 0; i <= last && !ret; i++) {
+ op = &ops[i];
+ switch(op->type) {
case MMAP:
ret = map(&mmu->skas.id, op->u.mmap.addr,
op->u.mmap.len, op->u.mmap.prot,
finished, flush);
break;
default:
- printk("Unknown op type %d in do_ops\n", op->type);
+ printk(KERN_ERR "Unknown op type %d in do_ops\n",
+ op->type);
break;
}
}
static void fix_range(struct mm_struct *mm, unsigned long start_addr,
unsigned long end_addr, int force)
{
- if(!proc_mm && (end_addr > CONFIG_STUB_START))
- end_addr = CONFIG_STUB_START;
+ if (!proc_mm && (end_addr > CONFIG_STUB_START))
+ end_addr = CONFIG_STUB_START;
- fix_range_common(mm, start_addr, end_addr, force, do_ops);
+ fix_range_common(mm, start_addr, end_addr, force, do_ops);
}
void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end)
{
- if(vma->vm_mm == NULL)
- flush_tlb_kernel_range_common(start, end);
- else fix_range(vma->vm_mm, start, end, 0);
+ if (vma->vm_mm == NULL)
+ flush_tlb_kernel_range_common(start, end);
+ else fix_range(vma->vm_mm, start, end, 0);
}
void flush_tlb_mm(struct mm_struct *mm)
{
unsigned long end;
- /* Don't bother flushing if this address space is about to be
- * destroyed.
- */
- if(atomic_read(&mm->mm_users) == 0)
- return;
+ /*
+ * Don't bother flushing if this address space is about to be
+ * destroyed.
+ */
+ if (atomic_read(&mm->mm_users) == 0)
+ return;
end = proc_mm ? task_size : CONFIG_STUB_START;
- fix_range(mm, 0, end, 0);
+ fix_range(mm, 0, end, 0);
}
void force_flush_all(void)
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma = mm->mmap;
- while(vma != NULL) {
+ while (vma != NULL) {
fix_range(mm, vma->vm_start, vma->vm_end, 1);
vma = vma->vm_next;
}
/*
- * Copyright (C) 2000, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include "linux/kernel.h"
-#include "linux/sched.h"
-#include "linux/notifier.h"
-#include "linux/mm.h"
-#include "linux/types.h"
-#include "linux/tty.h"
-#include "linux/init.h"
-#include "linux/bootmem.h"
-#include "linux/spinlock.h"
-#include "linux/utsname.h"
-#include "linux/sysrq.h"
-#include "linux/seq_file.h"
#include "linux/delay.h"
+#include "linux/mm.h"
#include "linux/module.h"
+#include "linux/seq_file.h"
+#include "linux/string.h"
#include "linux/utsname.h"
-#include "asm/page.h"
#include "asm/pgtable.h"
-#include "asm/ptrace.h"
-#include "asm/elf.h"
-#include "asm/user.h"
+#include "asm/processor.h"
#include "asm/setup.h"
-#include "ubd_user.h"
-#include "asm/current.h"
-#include "kern_util.h"
-#include "as-layout.h"
#include "arch.h"
+#include "as-layout.h"
+#include "init.h"
#include "kern.h"
#include "mem_user.h"
-#include "mem.h"
-#include "initrd.h"
-#include "init.h"
#include "os.h"
#include "skas.h"
printf("add_arg: Too many command line arguments!\n");
exit(1);
}
- if(strlen(command_line) > 0)
+ if (strlen(command_line) > 0)
strcat(command_line, " ");
strcat(command_line, arg);
}
/* Set in uml_mem_setup and modified in linux_main */
long long physmem_size = 32 * 1024 * 1024;
-static char *usage_string =
+static char *usage_string =
"User Mode Linux v%s\n"
" available at http://user-mode-linux.sourceforge.net/\n\n";
__uml_setup("ncpus=", uml_ncpus_setup,
"ncpus=<# of desired CPUs>\n"
-" This tells an SMP kernel how many virtual processors to start.\n\n"
+" This tells an SMP kernel how many virtual processors to start.\n\n"
);
#endif
int n;
n = strlen(p->str);
- if(!strncmp(line, p->str, n)){
- if (p->setup_func(line + n, add)) return 1;
- }
+ if (!strncmp(line, p->str, n) && p->setup_func(line + n, add))
+ return 1;
p++;
}
return 0;
initcall_t *p;
p = &__uml_postsetup_start;
- while(p < &__uml_postsetup_end){
+ while(p < &__uml_postsetup_end) {
(*p)();
p++;
}
unsigned int i, add;
char * mode;
- for (i = 1; i < argc; i++){
- if((i == 1) && (argv[i][0] == ' ')) continue;
+ for (i = 1; i < argc; i++) {
+ if ((i == 1) && (argv[i][0] == ' '))
+ continue;
add = 1;
uml_checksetup(argv[i], &add);
if (add)
add_arg(argv[i]);
}
- if(have_root == 0)
+ if (have_root == 0)
add_arg(DEFAULT_COMMAND_LINE);
+ /* OS sanity checks that need to happen before the kernel runs */
os_early_checks();
can_do_skas();
brk_start = (unsigned long) sbrk(0);
- /* Increase physical memory size for exec-shield users
- so they actually get what they asked for. This should
- add zero for non-exec shield users */
+ /*
+ * Increase physical memory size for exec-shield users
+ * so they actually get what they asked for. This should
+ * add zero for non-exec shield users
+ */
diff = UML_ROUND_UP(brk_start) - UML_ROUND_UP(&_end);
- if(diff > 1024 * 1024){
+ if (diff > 1024 * 1024) {
printf("Adding %ld bytes to physical memory to account for "
"exec-shield gap\n", diff);
physmem_size += UML_ROUND_UP(brk_start) - UML_ROUND_UP(&_end);
iomem_size = (iomem_size + PAGE_SIZE - 1) & PAGE_MASK;
max_physmem = get_kmem_end() - uml_physmem - iomem_size - MIN_VMALLOC;
- /* Zones have to begin on a 1 << MAX_ORDER page boundary,
+ /*
+ * Zones have to begin on a 1 << MAX_ORDER page boundary,
* so this makes sure that's true for highmem
*/
max_physmem &= ~((1 << (PAGE_SHIFT + MAX_ORDER)) - 1);
- if(physmem_size + iomem_size > max_physmem){
+ if (physmem_size + iomem_size > max_physmem) {
highmem = physmem_size + iomem_size - max_physmem;
physmem_size -= highmem;
#ifndef CONFIG_HIGHMEM
start_vm = VMALLOC_START;
setup_physmem(uml_physmem, uml_reserved, physmem_size, highmem);
- if(init_maps(physmem_size, iomem_size, highmem)){
+ if (init_maps(physmem_size, iomem_size, highmem)) {
printf("Failed to allocate mem_map for %Lu bytes of physical "
"memory and %Lu bytes of highmem\n", physmem_size,
highmem);
virtmem_size = physmem_size;
avail = get_kmem_end() - start_vm;
- if(physmem_size > avail) virtmem_size = avail;
+ if (physmem_size > avail)
+ virtmem_size = avail;
end_vm = start_vm + virtmem_size;
- if(virtmem_size < physmem_size)
+ if (virtmem_size < physmem_size)
printf("Kernel virtual memory size shrunk to %lu bytes\n",
virtmem_size);
/*
- * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include <stdlib.h>
#include <unistd.h>
+#include <sched.h>
#include <signal.h>
#include <errno.h>
-#include <sched.h>
-#include <sys/syscall.h>
-#include "os.h"
+#include <sys/time.h>
+#include <asm/unistd.h>
#include "aio.h"
#include "init.h"
-#include "user.h"
#include "kern_constants.h"
+#include "os.h"
+#include "user.h"
struct aio_thread_req {
enum aio_type type;
#if defined(HAVE_AIO_ABI)
#include <linux/aio_abi.h>
-/* If we have the headers, we are going to build with AIO enabled.
+/*
+ * If we have the headers, we are going to build with AIO enabled.
* If we don't have aio in libc, we define the necessary stubs here.
*/
#endif
-/* The AIO_MMAP cases force the mmapped page into memory here
+/*
+ * The AIO_MMAP cases force the mmapped page into memory here
* rather than in whatever place first touches the data. I used
* to do this by touching the page, but that's delicate because
* gcc is prone to optimizing that away. So, what's done here
signal(SIGWINCH, SIG_IGN);
- while(1){
+ while (1) {
n = io_getevents(ctx, 1, 1, &event, NULL);
- if(n < 0){
- if(errno == EINTR)
+ if (n < 0) {
+ if (errno == EINTR)
continue;
- printk("aio_thread - io_getevents failed, "
+ printk(UM_KERN_ERR "aio_thread - io_getevents failed, "
"errno = %d\n", errno);
}
else {
.err = event.res });
reply_fd = ((struct aio_context *) reply.data)->reply_fd;
err = write(reply_fd, &reply, sizeof(reply));
- if(err != sizeof(reply))
- printk("aio_thread - write failed, fd = %d, "
- "err = %d\n", reply_fd, errno);
+ if (err != sizeof(reply))
+ printk(UM_KERN_ERR "aio_thread - write failed, "
+ "fd = %d, err = %d\n", reply_fd, errno);
}
}
return 0;
int n;
actual = lseek64(req->io_fd, req->offset, SEEK_SET);
- if(actual != req->offset)
+ if (actual != req->offset)
return -errno;
- switch(req->type){
+ switch(req->type) {
case AIO_READ:
n = read(req->io_fd, req->buf, req->len);
break;
n = read(req->io_fd, &c, sizeof(c));
break;
default:
- printk("do_not_aio - bad request type : %d\n", req->type);
+ printk(UM_KERN_ERR "do_not_aio - bad request type : %d\n",
+ req->type);
return -EINVAL;
}
- if(n < 0)
+ if (n < 0)
return -errno;
return 0;
}
int err;
signal(SIGWINCH, SIG_IGN);
- while(1){
+ while (1) {
err = read(aio_req_fd_r, &req, sizeof(req));
- if(err != sizeof(req)){
- if(err < 0)
- printk("not_aio_thread - read failed, "
- "fd = %d, err = %d\n", aio_req_fd_r,
+ if (err != sizeof(req)) {
+ if (err < 0)
+ printk(UM_KERN_ERR "not_aio_thread - "
+ "read failed, fd = %d, err = %d\n",
+ aio_req_fd_r,
errno);
else {
- printk("not_aio_thread - short read, fd = %d, "
- "length = %d\n", aio_req_fd_r, err);
+ printk(UM_KERN_ERR "not_aio_thread - short "
+ "read, fd = %d, length = %d\n",
+ aio_req_fd_r, err);
}
continue;
}
reply = ((struct aio_thread_reply) { .data = req.aio,
.err = err });
err = write(req.aio->reply_fd, &reply, sizeof(reply));
- if(err != sizeof(reply))
- printk("not_aio_thread - write failed, fd = %d, "
- "err = %d\n", req.aio->reply_fd, errno);
+ if (err != sizeof(reply))
+ printk(UM_KERN_ERR "not_aio_thread - write failed, "
+ "fd = %d, err = %d\n", req.aio->reply_fd, errno);
}
return 0;
int fds[2], err;
err = os_pipe(fds, 1, 1);
- if(err)
+ if (err)
goto out;
aio_req_fd_w = fds[0];
aio_req_fd_r = fds[1];
err = os_set_fd_block(aio_req_fd_w, 0);
- if(err)
+ if (err)
goto out_close_pipe;
err = run_helper_thread(not_aio_thread, NULL,
CLONE_FILES | CLONE_VM | SIGCHLD, &aio_stack);
- if(err < 0)
+ if (err < 0)
goto out_close_pipe;
aio_pid = err;
aio_req_fd_r = -1;
out:
#ifndef HAVE_AIO_ABI
- printk("/usr/include/linux/aio_abi.h not present during build\n");
+ printk(UM_KERN_INFO "/usr/include/linux/aio_abi.h not present during "
+ "build\n");
#endif
- printk("2.6 host AIO support not used - falling back to I/O "
- "thread\n");
+ printk(UM_KERN_INFO "2.6 host AIO support not used - falling back to "
+ "I/O thread\n");
return 0;
}
{
int err;
- if(io_setup(256, &ctx)){
+ if (io_setup(256, &ctx)) {
err = -errno;
- printk("aio_thread failed to initialize context, err = %d\n",
- errno);
+ printk(UM_KERN_ERR "aio_thread failed to initialize context, "
+ "err = %d\n", errno);
return err;
}
err = run_helper_thread(aio_thread, NULL,
CLONE_FILES | CLONE_VM | SIGCHLD, &aio_stack);
- if(err < 0)
+ if (err < 0)
return err;
aio_pid = err;
- printk("Using 2.6 host AIO\n");
+ printk(UM_KERN_INFO "Using 2.6 host AIO\n");
return 0;
}
int err;
err = do_aio(ctx, type, io_fd, buf, len, offset, aio);
- if(err){
+ if (err) {
reply = ((struct aio_thread_reply) { .data = aio,
.err = err });
err = write(aio->reply_fd, &reply, sizeof(reply));
- if(err != sizeof(reply)){
+ if (err != sizeof(reply)) {
err = -errno;
- printk("submit_aio_26 - write failed, "
+ printk(UM_KERN_ERR "submit_aio_26 - write failed, "
"fd = %d, err = %d\n", aio->reply_fd, -err);
}
else err = 0;
{
int err;
- if(!aio_24){
+ if (!aio_24) {
err = init_aio_26();
- if(err && (errno == ENOSYS)){
- printk("2.6 AIO not supported on the host - "
- "reverting to 2.4 AIO\n");
+ if (err && (errno == ENOSYS)) {
+ printk(UM_KERN_INFO "2.6 AIO not supported on the "
+ "host - reverting to 2.4 AIO\n");
aio_24 = 1;
}
else return err;
}
- if(aio_24)
+ if (aio_24)
return init_aio_24();
return 0;
}
-/* The reason for the __initcall/__uml_exitcall asymmetry is that init_aio
+/*
+ * The reason for the __initcall/__uml_exitcall asymmetry is that init_aio
* needs to be called when the kernel is running because it calls run_helper,
* which needs get_free_page. exit_aio is a __uml_exitcall because the generic
* kernel does not run __exitcalls on shutdown, and can't because many of them
int err;
err = write(aio_req_fd_w, &req, sizeof(req));
- if(err == sizeof(req))
+ if (err == sizeof(req))
err = 0;
else err = -errno;
struct aio_context *aio)
{
aio->reply_fd = reply_fd;
- if(aio_24)
+ if (aio_24)
return submit_aio_24(type, io_fd, buf, len, offset, aio);
- else {
+ else
return submit_aio_26(type, io_fd, buf, len, offset, aio);
- }
}
close(fd);
}
-int os_seek_file(int fd, __u64 offset)
+int os_seek_file(int fd, unsigned long long offset)
{
- __u64 actual;
+ unsigned long long actual;
actual = lseek64(fd, offset, SEEK_SET);
if(actual != offset)
/*
- * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
-#include <string.h>
-#include <signal.h>
+#include <unistd.h>
#include <errno.h>
+#include <signal.h>
+#include <string.h>
#include <sys/resource.h>
-#include <sys/mman.h>
-#include <sys/user.h>
-#include "kern_util.h"
#include "as-layout.h"
-#include "mem_user.h"
-#include "irq_user.h"
-#include "user.h"
#include "init.h"
-#include "uml-config.h"
+#include "kern_constants.h"
+#include "kern_util.h"
#include "os.h"
#include "um_malloc.h"
-#include "kern_constants.h"
#define PGD_BOUND (4 * 1024 * 1024)
#define STACKSIZE (8 * 1024 * 1024)
{
struct rlimit lim;
- if(getrlimit(RLIMIT_STACK, &lim) < 0){
+ if (getrlimit(RLIMIT_STACK, &lim) < 0) {
perror("getrlimit");
exit(1);
}
- if((lim.rlim_cur == RLIM_INFINITY) || (lim.rlim_cur > STACKSIZE)){
+ if ((lim.rlim_cur == RLIM_INFINITY) || (lim.rlim_cur > STACKSIZE)) {
lim.rlim_cur = STACKSIZE;
- if(setrlimit(RLIMIT_STACK, &lim) < 0){
+ if (setrlimit(RLIMIT_STACK, &lim) < 0) {
perror("setrlimit");
exit(1);
}
initcall_t *call;
call = &__uml_initcall_start;
- while (call < &__uml_initcall_end){
+ while (call < &__uml_initcall_end) {
(*call)();
call++;
}
/* All signals are enabled in this handler ... */
sigemptyset(&action.sa_mask);
- /* ... including the signal being handled, plus we want the
+ /*
+ * ... including the signal being handled, plus we want the
* handler reset to the default behavior, so that if an exit
* handler is hanging for some reason, the UML will just die
* after this signal is sent a second time.
action.sa_flags = SA_RESETHAND | SA_NODEFER;
action.sa_restorer = NULL;
action.sa_handler = last_ditch_exit;
- if(sigaction(sig, &action, NULL) < 0){
+ if (sigaction(sig, &action, NULL) < 0) {
printf("failed to install handler for signal %d - errno = %d\n",
errno);
exit(1);
int path_len = 0;
old_path = getenv("PATH");
- /* if no PATH variable is set or it has an empty value
+ /*
+ * if no PATH variable is set or it has an empty value
* just use the default + /usr/lib/uml
*/
if (!old_path || (path_len = strlen(old_path)) == 0) {
setup_env_path();
new_argv = malloc((argc + 1) * sizeof(char *));
- if(new_argv == NULL){
+ if (new_argv == NULL) {
perror("Mallocing argv");
exit(1);
}
- for(i=0;i<argc;i++){
+ for (i = 0; i < argc; i++) {
new_argv[i] = strdup(argv[i]);
- if(new_argv[i] == NULL){
+ if (new_argv[i] == NULL) {
perror("Mallocing an arg");
exit(1);
}
}
new_argv[argc] = NULL;
- /* Allow these signals to bring down a UML if all other
+ /*
+ * Allow these signals to bring down a UML if all other
* methods of control fail.
*/
install_fatal_handler(SIGINT);
install_fatal_handler(SIGTERM);
install_fatal_handler(SIGHUP);
- scan_elf_aux( envp);
+ scan_elf_aux(envp);
do_uml_initcalls();
ret = linux_main(argc, argv);
- /* Disable SIGPROF - I have no idea why libc doesn't do this or turn
+ /*
+ * Disable SIGPROF - I have no idea why libc doesn't do this or turn
* off the profiling time, but UML dies with a SIGPROF just before
* exiting when profiling is active.
*/
change_sig(SIGPROF, 0);
- /* This signal stuff used to be in the reboot case. However,
+ /*
+ * This signal stuff used to be in the reboot case. However,
* sometimes a SIGVTALRM can come in when we're halting (reproducably
* when writing out gcov information, presumably because that takes
* some time) and cause a segfault.
/* disable SIGIO for the fds and set SIGIO to be ignored */
err = deactivate_all_fds();
- if(err)
+ if (err)
printf("deactivate_all_fds failed, errno = %d\n", -err);
- /* Let any pending signals fire now. This ensures
+ /*
+ * Let any pending signals fire now. This ensures
* that they won't be delivered after the exec, when
* they are definitely not expected.
*/
unblock_signals();
/* Reboot */
- if(ret){
+ if (ret) {
printf("\n");
execvp(new_argv[0], new_argv);
perror("Failed to exec kernel");
{
void *ret;
- if(!kmalloc_ok)
+ if (!kmalloc_ok)
return __real_malloc(size);
- else if(size <= UM_KERN_PAGE_SIZE)
+ else if (size <= UM_KERN_PAGE_SIZE)
/* finding contiguous pages can be hard*/
ret = kmalloc(size, UM_GFP_KERNEL);
else ret = vmalloc(size);
- /* glibc people insist that if malloc fails, errno should be
+ /*
+ * glibc people insist that if malloc fails, errno should be
* set by malloc as well. So we do.
*/
- if(ret == NULL)
+ if (ret == NULL)
errno = ENOMEM;
return ret;
{
void *ptr = __wrap_malloc(n * size);
- if(ptr == NULL)
+ if (ptr == NULL)
return NULL;
memset(ptr, 0, n * size);
return ptr;
{
unsigned long addr = (unsigned long) ptr;
- /* We need to know how the allocation happened, so it can be correctly
+ /*
+ * We need to know how the allocation happened, so it can be correctly
* freed. This is done by seeing what region of memory the pointer is
* in -
* physical memory - kmalloc/kfree
* there is a possibility for memory leaks.
*/
- if((addr >= uml_physmem) && (addr < high_physmem)){
- if(kmalloc_ok)
+ if ((addr >= uml_physmem) && (addr < high_physmem)) {
+ if (kmalloc_ok)
kfree(ptr);
}
- else if((addr >= start_vm) && (addr < end_vm)){
- if(kmalloc_ok)
+ else if ((addr >= start_vm) && (addr < end_vm)) {
+ if (kmalloc_ok)
vfree(ptr);
}
else __real_free(ptr);
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@addtoit.com)
+/*
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include <unistd.h>
#include <stdio.h>
+#include <unistd.h>
#include <errno.h>
#include <signal.h>
#include <sys/mman.h>
+#include <sys/ptrace.h>
#include <sys/wait.h>
-#include <sys/mman.h>
-#include <sys/syscall.h>
-#include "ptrace_user.h"
+#include <asm/unistd.h>
+#include "init.h"
+#include "kern_constants.h"
+#include "longjmp.h"
#include "os.h"
-#include "user.h"
#include "process.h"
-#include "irq_user.h"
-#include "kern_util.h"
-#include "longjmp.h"
#include "skas_ptrace.h"
-#include "kern_constants.h"
-#include "uml-config.h"
-#include "init.h"
+#include "user.h"
#define ARBITRARY_ADDR -1
#define FAILURE_PID -1
sprintf(proc_stat, "/proc/%d/stat", pid);
fd = os_open_file(proc_stat, of_read(OPENFLAGS()), 0);
- if(fd < 0){
- printk("os_process_pc - couldn't open '%s', err = %d\n",
- proc_stat, -fd);
+ if (fd < 0) {
+ printk(UM_KERN_ERR "os_process_pc - couldn't open '%s', "
+ "err = %d\n", proc_stat, -fd);
return ARBITRARY_ADDR;
}
CATCH_EINTR(err = read(fd, buf, sizeof(buf)));
- if(err < 0){
- printk("os_process_pc - couldn't read '%s', err = %d\n",
- proc_stat, errno);
+ if (err < 0) {
+ printk(UM_KERN_ERR "os_process_pc - couldn't read '%s', "
+ "err = %d\n", proc_stat, errno);
os_close_file(fd);
return ARBITRARY_ADDR;
}
os_close_file(fd);
pc = ARBITRARY_ADDR;
- if(sscanf(buf, "%*d " COMM_SCANF " %*c %*d %*d %*d %*d %*d %*d %*d "
+ if (sscanf(buf, "%*d " COMM_SCANF " %*c %*d %*d %*d %*d %*d %*d %*d "
"%*d %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d "
- "%*d %*d %*d %*d %*d %lu", &pc) != 1){
- printk("os_process_pc - couldn't find pc in '%s'\n", buf);
+ "%*d %*d %*d %*d %*d %lu", &pc) != 1) {
+ printk(UM_KERN_ERR "os_process_pc - couldn't find pc in '%s'\n",
+ buf);
}
return pc;
}
char data[256];
int parent, n, fd;
- if(pid == -1)
+ if (pid == -1)
return -1;
snprintf(stat, sizeof(stat), "/proc/%d/stat", pid);
fd = os_open_file(stat, of_read(OPENFLAGS()), 0);
- if(fd < 0){
- printk("Couldn't open '%s', err = %d\n", stat, -fd);
+ if (fd < 0) {
+ printk(UM_KERN_ERR "Couldn't open '%s', err = %d\n", stat, -fd);
return FAILURE_PID;
}
CATCH_EINTR(n = read(fd, data, sizeof(data)));
os_close_file(fd);
- if(n < 0){
- printk("Couldn't read '%s', err = %d\n", stat, errno);
+ if (n < 0) {
+ printk(UM_KERN_ERR "Couldn't read '%s', err = %d\n", stat,
+ errno);
return FAILURE_PID;
}
parent = FAILURE_PID;
n = sscanf(data, "%*d " COMM_SCANF " %*c %d", &parent);
- if(n != 1)
- printk("Failed to scan '%s'\n", data);
+ if (n != 1)
+ printk(UM_KERN_ERR "Failed to scan '%s'\n", data);
return parent;
}
void os_kill_process(int pid, int reap_child)
{
kill(pid, SIGKILL);
- if(reap_child)
+ if (reap_child)
CATCH_EINTR(waitpid(pid, NULL, 0));
-
}
/* This is here uniquely to have access to the userspace errno, i.e. the one
kill(pid, SIGKILL);
ptrace(PTRACE_KILL, pid);
ptrace(PTRACE_CONT, pid);
- if(reap_child)
+ if (reap_child)
CATCH_EINTR(waitpid(pid, NULL, 0));
}
void *loc;
int prot;
- prot = (r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) |
+ prot = (r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) |
(x ? PROT_EXEC : 0);
loc = mmap64((void *) virt, len, prot, MAP_SHARED | MAP_FIXED,
fd, off);
- if(loc == MAP_FAILED)
+ if (loc == MAP_FAILED)
return -errno;
return 0;
}
int os_protect_memory(void *addr, unsigned long len, int r, int w, int x)
{
- int prot = ((r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) |
+ int prot = ((r ? PROT_READ : 0) | (w ? PROT_WRITE : 0) |
(x ? PROT_EXEC : 0));
- if(mprotect(addr, len, prot) < 0)
+ if (mprotect(addr, len, prot) < 0)
return -errno;
- return 0;
+
+ return 0;
}
int os_unmap_memory(void *addr, int len)
{
- int err;
+ int err;
- err = munmap(addr, len);
- if(err < 0)
+ err = munmap(addr, len);
+ if (err < 0)
return -errno;
- return 0;
+ return 0;
}
#ifndef MADV_REMOVE
int err;
err = madvise(addr, length, MADV_REMOVE);
- if(err < 0)
+ if (err < 0)
err = -errno;
return err;
}
void *addr;
int fd, ok = 0;
- printk("Checking host MADV_REMOVE support...");
+ printk(UM_KERN_INFO "Checking host MADV_REMOVE support...");
fd = create_mem_file(UM_KERN_PAGE_SIZE);
- if(fd < 0){
- printk("Creating test memory file failed, err = %d\n", -fd);
+ if (fd < 0) {
+ printk(UM_KERN_ERR "Creating test memory file failed, "
+ "err = %d\n", -fd);
goto out;
}
addr = mmap64(NULL, UM_KERN_PAGE_SIZE, PROT_READ | PROT_WRITE,
MAP_SHARED, fd, 0);
- if(addr == MAP_FAILED){
- printk("Mapping test memory file failed, err = %d\n", -errno);
+ if (addr == MAP_FAILED) {
+ printk(UM_KERN_ERR "Mapping test memory file failed, "
+ "err = %d\n", -errno);
goto out_close;
}
- if(madvise(addr, UM_KERN_PAGE_SIZE, MADV_REMOVE) != 0){
- printk("MADV_REMOVE failed, err = %d\n", -errno);
+ if (madvise(addr, UM_KERN_PAGE_SIZE, MADV_REMOVE) != 0) {
+ printk(UM_KERN_ERR "MADV_REMOVE failed, err = %d\n", -errno);
goto out_unmap;
}
*jmp_ptr = &buf;
n = UML_SETJMP(&buf);
- if(n != 0)
+ if (n != 0)
return n;
(*fn)(arg);
return 0;
/*
* Copyright (C) 2004 PathScale, Inc
+ * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
#include <errno.h>
#include <string.h>
#include <sys/ptrace.h>
-#include "user.h"
#include "sysdep/ptrace.h"
+#include "user.h"
/* This is set once at boot time and not changed thereafter */
int err;
err = ptrace(PTRACE_GETREGS, pid, 0, regs->regs);
- if(err < 0)
+ if (err < 0)
panic("save_registers - saving registers failed, errno = %d\n",
errno);
}
int err;
err = ptrace(PTRACE_SETREGS, pid, 0, regs->regs);
- if(err < 0)
+ if (err < 0)
panic("restore_registers - saving registers failed, "
"errno = %d\n", errno);
}
int err;
err = ptrace(PTRACE_GETREGS, pid, 0, exec_regs);
- if(err)
+ if (err)
panic("check_ptrace : PTRACE_GETREGS failed, errno = %d",
errno);
}
/*
* Copyright (C) 2004 PathScale, Inc
+ * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include <signal.h>
-#include <stdio.h>
-#include <unistd.h>
#include <stdlib.h>
-#include <errno.h>
#include <stdarg.h>
-#include <string.h>
-#include <sys/mman.h>
-#include "user.h"
-#include "signal_kern.h"
-#include "sysdep/sigcontext.h"
-#include "sysdep/barrier.h"
-#include "sigcontext.h"
+#include <errno.h>
+#include <signal.h>
+#include <strings.h>
#include "os.h"
+#include "sysdep/barrier.h"
+#include "sysdep/sigcontext.h"
+#include "user.h"
-/* These are the asynchronous signals. SIGVTALRM and SIGARLM are handled
+/*
+ * These are the asynchronous signals. SIGVTALRM and SIGARLM are handled
* together under SIGVTALRM_BIT. SIGPROF is excluded because we want to
* be able to profile all of UML, not just the non-critical sections. If
* profiling is not thread-safe, then that is not my problem. We can disable
#define SIGALRM_BIT 2
#define SIGALRM_MASK (1 << SIGALRM_BIT)
-/* These are used by both the signal handlers and
+/*
+ * These are used by both the signal handlers and
* block/unblock_signals. I don't want modifications cached in a
* register - they must go straight to memory.
*/
int enabled;
enabled = signals_enabled;
- if(!enabled && (sig == SIGIO)){
+ if (!enabled && (sig == SIGIO)) {
pending |= SIGIO_MASK;
return;
}
{
struct uml_pt_regs regs;
- if(sig == SIGALRM)
+ if (sig == SIGALRM)
switch_timers(0);
- if(sc != NULL)
+ if (sc != NULL)
copy_sc(®s, sc);
regs.is_user = 0;
unblock_signals();
timer_handler(sig, ®s);
- if(sig == SIGALRM)
+ if (sig == SIGALRM)
switch_timers(1);
}
int enabled;
enabled = signals_enabled;
- if(!signals_enabled){
- if(sig == SIGVTALRM)
+ if (!signals_enabled) {
+ if (sig == SIGVTALRM)
pending |= SIGVTALRM_MASK;
else pending |= SIGALRM_MASK;
.ss_sp = (__ptr_t) sig_stack,
.ss_size = size - sizeof(void *) });
- if(sigaltstack(&stack, NULL) != 0)
+ if (sigaltstack(&stack, NULL) != 0)
panic("enabling signal stack failed, errno = %d\n", errno);
}
.ss_sp = NULL,
.ss_size = 0 });
- if(sigaltstack(&stack, NULL) != 0)
+ if (sigaltstack(&stack, NULL) != 0)
panic("disabling signal stack failed, errno = %d\n", errno);
}
* with this interrupt.
*/
bail = to_irq_stack(&pending);
- if(bail)
+ if (bail)
return;
nested = pending & 1;
pending &= ~1;
- while((sig = ffs(pending)) != 0){
+ while ((sig = ffs(pending)) != 0){
sig--;
pending &= ~(1 << sig);
(*handlers[sig])(sig, sc);
}
- /* Again, pending comes back with a mask of signals
+ /*
+ * Again, pending comes back with a mask of signals
* that arrived while tearing down the stack. If this
* is non-zero, we just go back, set up the stack
* again, and handle the new interrupts.
*/
- if(!nested)
+ if (!nested)
pending = from_irq_stack(nested);
- } while(pending);
+ } while (pending);
}
extern void hard_handler(int sig);
sigemptyset(&action.sa_mask);
va_start(ap, flags);
- while((mask = va_arg(ap, int)) != -1)
+ while ((mask = va_arg(ap, int)) != -1)
sigaddset(&action.sa_mask, mask);
va_end(ap);
action.sa_flags = flags;
action.sa_restorer = NULL;
- if(sigaction(sig, &action, NULL) < 0)
+ if (sigaction(sig, &action, NULL) < 0)
panic("sigaction failed - errno = %d\n", errno);
sigemptyset(&sig_mask);
sigaddset(&sig_mask, sig);
- if(sigprocmask(SIG_UNBLOCK, &sig_mask, NULL) < 0)
+ if (sigprocmask(SIG_UNBLOCK, &sig_mask, NULL) < 0)
panic("sigprocmask failed - errno = %d\n", errno);
}
sigemptyset(&sigset);
sigaddset(&sigset, signal);
sigprocmask(on ? SIG_UNBLOCK : SIG_BLOCK, &sigset, &old);
- return(!sigismember(&old, signal));
+ return !sigismember(&old, signal);
}
void block_signals(void)
{
signals_enabled = 0;
- /* This must return with signals disabled, so this barrier
+ /*
+ * This must return with signals disabled, so this barrier
* ensures that writes are flushed out before the return.
* This might matter if gcc figures out how to inline this and
* decides to shuffle this code into the caller.
{
int save_pending;
- if(signals_enabled == 1)
+ if (signals_enabled == 1)
return;
- /* We loop because the IRQ handler returns with interrupts off. So,
+ /*
+ * We loop because the IRQ handler returns with interrupts off. So,
* interrupts may have arrived and we need to re-enable them and
* recheck pending.
*/
- while(1){
- /* Save and reset save_pending after enabling signals. This
+ while(1) {
+ /*
+ * Save and reset save_pending after enabling signals. This
* way, pending won't be changed while we're reading it.
*/
signals_enabled = 1;
- /* Setting signals_enabled and reading pending must
+ /*
+ * Setting signals_enabled and reading pending must
* happen in this order.
*/
mb();
save_pending = pending;
- if(save_pending == 0){
- /* This must return with signals enabled, so
+ if (save_pending == 0) {
+ /*
+ * This must return with signals enabled, so
* this barrier ensures that writes are
* flushed out before the return. This might
* matter if gcc figures out how to inline
pending = 0;
- /* We have pending interrupts, so disable signals, as the
+ /*
+ * We have pending interrupts, so disable signals, as the
* handlers expect them off when they are called. They will
* be enabled again above.
*/
signals_enabled = 0;
- /* Deal with SIGIO first because the alarm handler might
+ /*
+ * Deal with SIGIO first because the alarm handler might
* schedule, leaving the pending SIGIO stranded until we come
* back here.
*/
- if(save_pending & SIGIO_MASK)
+ if (save_pending & SIGIO_MASK)
sig_handler_common_skas(SIGIO, NULL);
- if(save_pending & SIGALRM_MASK)
+ if (save_pending & SIGALRM_MASK)
real_alarm_handler(SIGALRM, NULL);
- if(save_pending & SIGVTALRM_MASK)
+ if (save_pending & SIGVTALRM_MASK)
real_alarm_handler(SIGVTALRM, NULL);
}
}
int set_signals(int enable)
{
int ret;
- if(signals_enabled == enable)
+ if (signals_enabled == enable)
return enable;
ret = signals_enabled;
- if(enable)
+ if (enable)
unblock_signals();
else block_signals();
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include <signal.h>
+#include <stddef.h>
+#include <unistd.h>
#include <errno.h>
#include <string.h>
-#include <unistd.h>
#include <sys/mman.h>
-#include <sys/wait.h>
-#include <asm/unistd.h>
-#include "mem_user.h"
-#include "mem.h"
-#include "skas.h"
-#include "user.h"
+#include "init.h"
+#include "kern_constants.h"
+#include "mm_id.h"
#include "os.h"
#include "proc_mm.h"
#include "ptrace_user.h"
-#include "kern_util.h"
-#include "task.h"
#include "registers.h"
-#include "uml-config.h"
+#include "skas.h"
+#include "user.h"
#include "sysdep/ptrace.h"
#include "sysdep/stub.h"
-#include "init.h"
-#include "kern_constants.h"
+#include "uml-config.h"
extern unsigned long batch_syscall_stub, __syscall_stub_start;
static inline unsigned long *check_init_stack(struct mm_id * mm_idp,
unsigned long *stack)
{
- if(stack == NULL) {
+ if (stack == NULL) {
stack = (unsigned long *) mm_idp->stack + 2;
*stack = 0;
}
unsigned long * syscall;
int err, pid = mm_idp->u.pid;
- if(proc_mm)
+ if (proc_mm)
/* FIXME: Need to look up userspace_pid by cpu */
pid = userspace_pid[0];
multi_count++;
n = ptrace_setregs(pid, syscall_regs);
- if(n < 0){
- printk("Registers - \n");
- for(i = 0; i < MAX_REG_NR; i++)
- printk("\t%d\t0x%lx\n", i, syscall_regs[i]);
+ if (n < 0) {
+ printk(UM_KERN_ERR "Registers - \n");
+ for (i = 0; i < MAX_REG_NR; i++)
+ printk(UM_KERN_ERR "\t%d\t0x%lx\n", i, syscall_regs[i]);
panic("do_syscall_stub : PTRACE_SETREGS failed, errno = %d\n",
-n);
}
err = ptrace(PTRACE_CONT, pid, 0, 0);
- if(err)
+ if (err)
panic("Failed to continue stub, pid = %d, errno = %d\n", pid,
errno);
wait_stub_done(pid);
- /* When the stub stops, we find the following values on the
+ /*
+ * When the stub stops, we find the following values on the
* beginning of the stack:
* (long )return_value
* (long )offset to failed sycall-data (0, if no error)
if (offset) {
data = (unsigned long *)(mm_idp->stack +
offset - UML_CONFIG_STUB_DATA);
- printk("do_syscall_stub : ret = %ld, offset = %ld, "
+ printk(UM_KERN_ERR "do_syscall_stub : ret = %ld, offset = %ld, "
"data = %p\n", ret, offset, data);
syscall = (unsigned long *)((unsigned long)data + data[0]);
- printk("do_syscall_stub: syscall %ld failed, return value = "
- "0x%lx, expected return value = 0x%lx\n",
+ printk(UM_KERN_ERR "do_syscall_stub: syscall %ld failed, "
+ "return value = 0x%lx, expected return value = 0x%lx\n",
syscall[0], ret, syscall[7]);
- printk(" syscall parameters: "
+ printk(UM_KERN_ERR " syscall parameters: "
"0x%lx 0x%lx 0x%lx 0x%lx 0x%lx 0x%lx\n",
syscall[1], syscall[2], syscall[3],
syscall[4], syscall[5], syscall[6]);
- for(n = 1; n < data[0]/sizeof(long); n++) {
- if(n == 1)
- printk(" additional syscall data:");
- if(n % 4 == 1)
- printk("\n ");
+ for (n = 1; n < data[0]/sizeof(long); n++) {
+ if (n == 1)
+ printk(UM_KERN_ERR " additional syscall "
+ "data:");
+ if (n % 4 == 1)
+ printk("\n" UM_KERN_ERR " ");
printk(" 0x%lx", data[n]);
}
- if(n > 1)
+ if (n > 1)
printk("\n");
}
else ret = 0;
{
unsigned long *stack = check_init_stack(mm_idp, *addr);
- if(done && *addr == NULL)
+ if (done && *addr == NULL)
single_count++;
*stack += sizeof(long);
*stack = 0;
multi_op_count++;
- if(!done && ((((unsigned long) stack) & ~UM_KERN_PAGE_MASK) <
- UM_KERN_PAGE_SIZE - 10 * sizeof(long))){
+ if (!done && ((((unsigned long) stack) & ~UM_KERN_PAGE_MASK) <
+ UM_KERN_PAGE_SIZE - 10 * sizeof(long))) {
*addr = stack;
return 0;
}
unsigned long *stack;
int ret = 0;
- /* If *addr still is uninitialized, it *must* contain NULL.
+ /*
+ * If *addr still is uninitialized, it *must* contain NULL.
* Thus in this case do_syscall_stub correctly won't be called.
*/
- if((((unsigned long) *addr) & ~UM_KERN_PAGE_MASK) >=
+ if ((((unsigned long) *addr) & ~UM_KERN_PAGE_MASK) >=
UM_KERN_PAGE_SIZE - (10 + data_count) * sizeof(long)) {
ret = do_syscall_stub(mm_idp, addr);
/* in case of error, don't overwrite data on stack */
- if(ret)
+ if (ret)
return ret;
}
{
int ret;
- if(proc_mm){
+ if (proc_mm) {
struct proc_mm_op map;
int fd = mm_idp->u.mm_fd;
.offset= offset
} } } );
CATCH_EINTR(ret = write(fd, &map, sizeof(map)));
- if(ret != sizeof(map)){
+ if (ret != sizeof(map)) {
ret = -errno;
- printk("map : /proc/mm map failed, err = %d\n", -ret);
+ printk(UM_KERN_ERR "map : /proc/mm map failed, "
+ "err = %d\n", -ret);
}
else ret = 0;
}
{
int ret;
- if(proc_mm){
+ if (proc_mm) {
struct proc_mm_op unmap;
int fd = mm_idp->u.mm_fd;
(unsigned long) addr,
.len = len } } } );
CATCH_EINTR(ret = write(fd, &unmap, sizeof(unmap)));
- if(ret != sizeof(unmap)){
+ if (ret != sizeof(unmap)) {
ret = -errno;
- printk("unmap - proc_mm write returned %d\n", ret);
+ printk(UM_KERN_ERR "unmap - proc_mm write returned "
+ "%d\n", ret);
}
else ret = 0;
}
struct proc_mm_op protect;
int ret;
- if(proc_mm){
+ if (proc_mm) {
int fd = mm_idp->u.mm_fd;
protect = ((struct proc_mm_op) { .op = MM_MPROTECT,
.prot = prot } } } );
CATCH_EINTR(ret = write(fd, &protect, sizeof(protect)));
- if(ret != sizeof(protect)){
+ if (ret != sizeof(protect)) {
ret = -errno;
- printk("protect failed, err = %d", -ret);
+ printk(UM_KERN_ERR "protect failed, err = %d", -ret);
}
else ret = 0;
}
/*
- * Copyright (C) 2002- 2004 Jeff Dike (jdike@addtoit.com)
+ * Copyright (C) 2002- 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
#include <stdlib.h>
-#include <string.h>
#include <unistd.h>
-#include <errno.h>
-#include <signal.h>
#include <sched.h>
-#include "ptrace_user.h"
-#include <sys/wait.h>
+#include <errno.h>
+#include <string.h>
#include <sys/mman.h>
-#include <sys/user.h>
-#include <sys/time.h>
-#include <sys/syscall.h>
-#include <asm/types.h>
-#include "user.h"
-#include "sysdep/ptrace.h"
-#include "kern_util.h"
-#include "skas.h"
-#include "stub-data.h"
-#include "mm_id.h"
-#include "sysdep/sigcontext.h"
-#include "sysdep/stub.h"
-#include "os.h"
-#include "proc_mm.h"
-#include "skas_ptrace.h"
+#include <sys/ptrace.h>
+#include <sys/wait.h>
+#include <asm/unistd.h>
+#include "as-layout.h"
#include "chan_user.h"
-#include "registers.h"
+#include "kern_constants.h"
#include "mem.h"
-#include "uml-config.h"
+#include "os.h"
#include "process.h"
-#include "longjmp.h"
-#include "kern_constants.h"
-#include "as-layout.h"
+#include "proc_mm.h"
+#include "ptrace_user.h"
+#include "registers.h"
+#include "skas.h"
+#include "skas_ptrace.h"
+#include "user.h"
+#include "sysdep/stub.h"
int is_skas_winch(int pid, int fd, void *data)
{
- if(pid != os_getpgrp())
- return(0);
+ if (pid != os_getpgrp())
+ return 0;
register_winch_irq(-1, fd, -1, data, 0);
- return(1);
+ return 1;
}
static int ptrace_dump_regs(int pid)
unsigned long regs[MAX_REG_NR];
int i;
- if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
+ if (ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
return -errno;
- else {
- printk("Stub registers -\n");
- for(i = 0; i < ARRAY_SIZE(regs); i++)
- printk("\t%d - %lx\n", i, regs[i]);
- }
+
+ printk(UM_KERN_ERR "Stub registers -\n");
+ for (i = 0; i < ARRAY_SIZE(regs); i++)
+ printk(UM_KERN_ERR "\t%d - %lx\n", i, regs[i]);
return 0;
}
{
int n, status, err;
- while(1){
+ while (1) {
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
- if((n < 0) || !WIFSTOPPED(status))
+ if ((n < 0) || !WIFSTOPPED(status))
goto bad_wait;
- if(((1 << WSTOPSIG(status)) & STUB_SIG_MASK) == 0)
+ if (((1 << WSTOPSIG(status)) & STUB_SIG_MASK) == 0)
break;
err = ptrace(PTRACE_CONT, pid, 0, 0);
- if(err)
+ if (err)
panic("wait_stub_done : continue failed, errno = %d\n",
errno);
}
- if(((1 << WSTOPSIG(status)) & STUB_DONE_MASK) != 0)
+ if (((1 << WSTOPSIG(status)) & STUB_DONE_MASK) != 0)
return;
bad_wait:
err = ptrace_dump_regs(pid);
- if(err)
- printk("Failed to get registers from stub, errno = %d\n", -err);
+ if (err)
+ printk(UM_KERN_ERR "Failed to get registers from stub, "
+ "errno = %d\n", -err);
panic("wait_stub_done : failed to wait for SIGUSR1/SIGTRAP, pid = %d, "
"n = %d, errno = %d, status = 0x%x\n", pid, n, errno, status);
}
{
int err;
- if(ptrace_faultinfo){
+ if (ptrace_faultinfo) {
err = ptrace(PTRACE_FAULTINFO, pid, 0, fi);
- if(err)
+ if (err)
panic("get_skas_faultinfo - PTRACE_FAULTINFO failed, "
"errno = %d\n", errno);
}
else {
err = ptrace(PTRACE_CONT, pid, 0, SIGSEGV);
- if(err)
+ if (err)
panic("Failed to continue stub, pid = %d, errno = %d\n",
pid, errno);
wait_stub_done(pid);
- /* faultinfo is prepared by the stub-segv-handler at start of
+ /*
+ * faultinfo is prepared by the stub-segv-handler at start of
* the stub stack page. We just have to copy it.
*/
memcpy(fi, (void *)current_stub_stack(), sizeof(*fi));
segv(regs->faultinfo, 0, 1, NULL);
}
-/*To use the same value of using_sysemu as the caller, ask it that value (in local_using_sysemu)*/
-static void handle_trap(int pid, struct uml_pt_regs *regs, int local_using_sysemu)
+/*
+ * To use the same value of using_sysemu as the caller, ask it that value
+ * (in local_using_sysemu
+ */
+static void handle_trap(int pid, struct uml_pt_regs *regs,
+ int local_using_sysemu)
{
int err, status;
{
err = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_NR_OFFSET,
__NR_getpid);
- if(err < 0)
- panic("handle_trap - nullifying syscall failed errno = %d\n",
- errno);
+ if (err < 0)
+ panic("handle_trap - nullifying syscall failed, "
+ "errno = %d\n", errno);
err = ptrace(PTRACE_SYSCALL, pid, 0, 0);
- if(err < 0)
- panic("handle_trap - continuing to end of syscall failed, "
- "errno = %d\n", errno);
+ if (err < 0)
+ panic("handle_trap - continuing to end of syscall "
+ "failed, errno = %d\n", errno);
CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
- if((err < 0) || !WIFSTOPPED(status) ||
- (WSTOPSIG(status) != SIGTRAP + 0x80)){
+ if ((err < 0) || !WIFSTOPPED(status) ||
+ (WSTOPSIG(status) != SIGTRAP + 0x80)) {
err = ptrace_dump_regs(pid);
- if(err)
- printk("Failed to get registers from process, "
- "errno = %d\n", -err);
+ if (err)
+ printk(UM_KERN_ERR "Failed to get registers "
+ "from process, errno = %d\n", -err);
panic("handle_trap - failed to wait at end of syscall, "
"errno = %d, status = %d\n", errno, status);
}
init_new_thread_signals();
err = set_interval(1);
- if(err)
+ if (err)
panic("userspace_tramp - setting timer failed, errno = %d\n",
err);
- if(!proc_mm){
- /* This has a pte, but it can't be mapped in with the usual
+ if (!proc_mm) {
+ /*
+ * This has a pte, but it can't be mapped in with the usual
* tlb_flush mechanism because this is part of that mechanism
*/
int fd;
- __u64 offset;
+ unsigned long long offset;
fd = phys_mapping(to_phys(&__syscall_stub_start), &offset);
addr = mmap64((void *) UML_CONFIG_STUB_CODE, UM_KERN_PAGE_SIZE,
PROT_EXEC, MAP_FIXED | MAP_PRIVATE, fd, offset);
- if(addr == MAP_FAILED){
- printk("mapping mmap stub failed, errno = %d\n",
- errno);
+ if (addr == MAP_FAILED) {
+ printk(UM_KERN_ERR "mapping mmap stub failed, "
+ "errno = %d\n", errno);
exit(1);
}
- if(stack != NULL){
+ if (stack != NULL) {
fd = phys_mapping(to_phys(stack), &offset);
addr = mmap((void *) UML_CONFIG_STUB_DATA,
UM_KERN_PAGE_SIZE, PROT_READ | PROT_WRITE,
MAP_FIXED | MAP_SHARED, fd, offset);
- if(addr == MAP_FAILED){
- printk("mapping segfault stack failed, "
- "errno = %d\n", errno);
+ if (addr == MAP_FAILED) {
+ printk(UM_KERN_ERR "mapping segfault stack "
+ "failed, errno = %d\n", errno);
exit(1);
}
}
}
- if(!ptrace_faultinfo && (stack != NULL)){
+ if (!ptrace_faultinfo && (stack != NULL)) {
struct sigaction sa;
unsigned long v = UML_CONFIG_STUB_CODE +
sa.sa_flags = SA_ONSTACK;
sa.sa_handler = (void *) v;
sa.sa_restorer = NULL;
- if(sigaction(SIGSEGV, &sa, NULL) < 0)
+ if (sigaction(SIGSEGV, &sa, NULL) < 0)
panic("userspace_tramp - setting SIGSEGV handler "
"failed - errno = %d\n", errno);
}
os_stop_process(os_getpid());
- return(0);
+ return 0;
}
/* Each element set once, and only accessed by a single processor anyway */
stack = mmap(NULL, UM_KERN_PAGE_SIZE,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- if(stack == MAP_FAILED)
+ if (stack == MAP_FAILED)
panic("start_userspace : mmap failed, errno = %d", errno);
sp = (unsigned long) stack + UM_KERN_PAGE_SIZE - sizeof(void *);
flags = CLONE_FILES | SIGCHLD;
- if(proc_mm) flags |= CLONE_VM;
+ if (proc_mm)
+ flags |= CLONE_VM;
+
pid = clone(userspace_tramp, (void *) sp, flags, (void *) stub_stack);
- if(pid < 0)
+ if (pid < 0)
panic("start_userspace : clone failed, errno = %d", errno);
do {
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
- if(n < 0)
+ if (n < 0)
panic("start_userspace : wait failed, errno = %d",
errno);
- } while(WIFSTOPPED(status) && (WSTOPSIG(status) == SIGVTALRM));
+ } while (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGVTALRM));
- if(!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP))
+ if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP))
panic("start_userspace : expected SIGSTOP, got status = %d",
status);
- if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL, (void *)PTRACE_O_TRACESYSGOOD) < 0)
- panic("start_userspace : PTRACE_OLDSETOPTIONS failed, errno=%d\n",
- errno);
+ if (ptrace(PTRACE_OLDSETOPTIONS, pid, NULL,
+ (void *) PTRACE_O_TRACESYSGOOD) < 0)
+ panic("start_userspace : PTRACE_OLDSETOPTIONS failed, "
+ "errno = %d\n", errno);
- if(munmap(stack, UM_KERN_PAGE_SIZE) < 0)
+ if (munmap(stack, UM_KERN_PAGE_SIZE) < 0)
panic("start_userspace : munmap failed, errno = %d\n", errno);
- return(pid);
+ return pid;
}
void userspace(struct uml_pt_regs *regs)
/* To prevent races if using_sysemu changes under us.*/
int local_using_sysemu;
- while(1){
+ while (1) {
restore_registers(pid, regs);
/* Now we set local_using_sysemu to be used for one loop */
singlestepping(NULL));
err = ptrace(op, pid, 0, 0);
- if(err)
+ if (err)
panic("userspace - could not resume userspace process, "
"pid=%d, ptrace operation = %d, errno = %d\n",
pid, op, errno);
CATCH_EINTR(err = waitpid(pid, &status, WUNTRACED));
- if(err < 0)
+ if (err < 0)
panic("userspace - waitpid failed, errno = %d\n",
errno);
save_registers(pid, regs);
UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */
- if(WIFSTOPPED(status)){
+ if (WIFSTOPPED(status)) {
int sig = WSTOPSIG(status);
- switch(sig){
+ switch(sig) {
case SIGSEGV:
- if(PTRACE_FULL_FAULTINFO || !ptrace_faultinfo){
- get_skas_faultinfo(pid, ®s->faultinfo);
+ if (PTRACE_FULL_FAULTINFO ||
+ !ptrace_faultinfo) {
+ get_skas_faultinfo(pid,
+ ®s->faultinfo);
(*sig_info[SIGSEGV])(SIGSEGV, regs);
}
else handle_segv(pid, regs);
unblock_signals();
break;
default:
- printk("userspace - child stopped with signal "
- "%d\n", sig);
+ printk(UM_KERN_ERR "userspace - child stopped "
+ "with signal %d\n", sig);
}
pid = userspace_pid[0];
interrupt_end();
/* Avoid -ERESTARTSYS handling in host */
- if(PT_SYSCALL_NR_OFFSET != PT_SYSCALL_RET_OFFSET)
+ if (PT_SYSCALL_NR_OFFSET != PT_SYSCALL_RET_OFFSET)
PT_SYSCALL_NR(regs->regs) = -1;
}
}
__u64 new_offset;
int new_fd = phys_mapping(to_phys((void *)new_stack), &new_offset);
- /* prepare offset and fd of child's stack as argument for parent's
+ /*
+ * prepare offset and fd of child's stack as argument for parent's
* and child's mmap2 calls
*/
*data = ((struct stub_data) { .offset = MMAP_OFFSET(new_offset),
{ { 0, 1000000 / hz() },
{ 0, 1000000 / hz() }})});
err = ptrace_setregs(pid, thread_regs);
- if(err < 0)
+ if (err < 0)
panic("copy_context_skas0 : PTRACE_SETREGS failed, "
"pid = %d, errno = %d\n", pid, -err);
/* set a well known return code for detection of child write failure */
child_data->err = 12345678;
- /* Wait, until parent has finished its work: read child's pid from
+ /*
+ * Wait, until parent has finished its work: read child's pid from
* parent's stack, and check, if bad result.
*/
err = ptrace(PTRACE_CONT, pid, 0, 0);
- if(err)
+ if (err)
panic("Failed to continue new process, pid = %d, "
"errno = %d\n", pid, errno);
wait_stub_done(pid);
pid = data->err;
- if(pid < 0)
+ if (pid < 0)
panic("copy_context_skas0 - stub-parent reports error %d\n",
-pid);
- /* Wait, until child has finished too: read child's result from
+ /*
+ * Wait, until child has finished too: read child's result from
* child's stack and check it.
*/
wait_stub_done(pid);
.offset = code_offset
} } });
CATCH_EINTR(n = write(fd, &mmop, sizeof(mmop)));
- if(n != sizeof(mmop)){
+ if (n != sizeof(mmop)) {
n = errno;
- printk("mmap args - addr = 0x%lx, fd = %d, offset = %llx\n",
- code, code_fd, (unsigned long long) code_offset);
+ printk(UM_KERN_ERR "mmap args - addr = 0x%lx, fd = %d, "
+ "offset = %llx\n", code, code_fd,
+ (unsigned long long) code_offset);
panic("map_stub_pages : /proc/mm map for code failed, "
"err = %d\n", n);
}
- if ( stack ) {
+ if (stack) {
__u64 map_offset;
int map_fd = phys_mapping(to_phys((void *)stack), &map_offset);
mmop = ((struct proc_mm_op)
.offset = map_offset
} } });
CATCH_EINTR(n = write(fd, &mmop, sizeof(mmop)));
- if(n != sizeof(mmop))
+ if (n != sizeof(mmop))
panic("map_stub_pages : /proc/mm map for data failed, "
"err = %d\n", errno);
}
void switch_threads(jmp_buf *me, jmp_buf *you)
{
- if(UML_SETJMP(me) == 0)
+ if (UML_SETJMP(me) == 0)
UML_LONGJMP(you, 1);
}
* after returning to the jumper.
*/
n = setjmp(initial_jmpbuf);
- switch(n){
+ switch(n) {
case INIT_JMP_NEW_THREAD:
(*switch_buf)[0].JB_IP = (unsigned long) new_thread_handler;
(*switch_buf)[0].JB_SP = (unsigned long) stack +
break;
case INIT_JMP_HALT:
kmalloc_ok = 0;
- return(0);
+ return 0;
case INIT_JMP_REBOOT:
kmalloc_ok = 0;
- return(1);
+ return 1;
default:
panic("Bad sigsetjmp return in start_idle_thread - %d\n", n);
}
cb_back = &here;
block_signals();
- if(UML_SETJMP(&here) == 0)
+ if (UML_SETJMP(&here) == 0)
UML_LONGJMP(&initial_jmpbuf, INIT_JMP_CALLBACK);
unblock_signals();
int err;
/* FIXME: need cpu pid in __switch_mm */
- if(proc_mm){
+ if (proc_mm) {
err = ptrace(PTRACE_SWITCH_MM, userspace_pid[0], 0,
mm_idp->u.mm_fd);
- if(err)
+ if (err)
panic("__switch_mm - PTRACE_SWITCH_MM failed, "
"errno = %d\n", errno);
}
/*
- * Copyright (C) 2002 - 2003 Jeff Dike (jdike@addtoit.com)
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include <signal.h>
-#include <errno.h>
+#if 0
#include "kern_util.h"
-#include "as-layout.h"
-#include "task.h"
-#include "sigcontext.h"
#include "skas.h"
#include "ptrace_user.h"
-#include "sysdep/ptrace.h"
#include "sysdep/ptrace_user.h"
+#endif
+
+#include <errno.h>
+#include <signal.h>
+#include "sysdep/ptrace.h"
+#include "kern_constants.h"
+#include "as-layout.h"
#include "os.h"
+#include "sigcontext.h"
+#include "task.h"
static struct uml_pt_regs ksig_regs[UM_NR_CPUS];
void (*handler)(int, struct uml_pt_regs *);
int save_user, save_errno = errno;
- /* This is done because to allow SIGSEGV to be delivered inside a SEGV
+ /*
+ * This is done because to allow SIGSEGV to be delivered inside a SEGV
* handler. This can happen in copy_user, and if SEGV is disabled,
* the process will die.
* XXX Figure out why this is better than SA_NODEFER
*/
- if(sig == SIGSEGV) {
+ if (sig == SIGSEGV) {
change_sig(SIGSEGV, 1);
- /* For segfaults, we want the data from the
+ /*
+ * For segfaults, we want the data from the
* sigcontext. In this case, we don't want to mangle
* the process registers, so use a static set of
* registers. For other signals, the process
save_user = r->is_user;
r->is_user = 0;
- if ( sig == SIGFPE || sig == SIGSEGV ||
- sig == SIGBUS || sig == SIGILL ||
- sig == SIGTRAP ) {
+ if ((sig == SIGFPE) || (sig == SIGSEGV) || (sig == SIGBUS) ||
+ (sig == SIGILL) || (sig == SIGTRAP))
GET_FAULTINFO_FROM_SC(r->faultinfo, sc);
- }
change_sig(SIGUSR1, 1);
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include <pty.h>
#include <stdio.h>
-#include <stddef.h>
-#include <stdarg.h>
#include <stdlib.h>
-#include <string.h>
+#include <stdarg.h>
#include <unistd.h>
-#include <signal.h>
-#include <sched.h>
-#include <fcntl.h>
#include <errno.h>
-#include <sys/time.h>
-#include <sys/wait.h>
+#include <fcntl.h>
+#include <sched.h>
+#include <signal.h>
+#include <string.h>
#include <sys/mman.h>
-#include <sys/resource.h>
+#include <sys/ptrace.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
#include <asm/unistd.h>
-#include <sys/types.h>
-#include "kern_util.h"
-#include "user.h"
-#include "signal_kern.h"
-#include "sysdep/ptrace.h"
-#include "sysdep/sigcontext.h"
-#include "irq_user.h"
-#include "ptrace_user.h"
-#include "mem_user.h"
#include "init.h"
-#include "os.h"
-#include "uml-config.h"
-#include "tempfile.h"
#include "kern_constants.h"
-#include "skas.h"
-#include "skas_ptrace.h"
+#include "os.h"
+#include "mem_user.h"
+#include "ptrace_user.h"
#include "registers.h"
+#include "skas_ptrace.h"
static int ptrace_child(void *arg)
{
int sc_result;
change_sig(SIGWINCH, 0);
- if(ptrace(PTRACE_TRACEME, 0, 0, 0) < 0){
+ if (ptrace(PTRACE_TRACEME, 0, 0, 0) < 0) {
perror("ptrace");
os_kill_process(pid, 0);
}
kill(pid, SIGSTOP);
- /*This syscall will be intercepted by the parent. Don't call more than
- * once, please.*/
+ /*
+ * This syscall will be intercepted by the parent. Don't call more than
+ * once, please.
+ */
sc_result = os_getpid();
if (sc_result == pid)
- ret = 1; /*Nothing modified by the parent, we are running
- normally.*/
+ /* Nothing modified by the parent, we are running normally. */
+ ret = 1;
else if (sc_result == ppid)
- ret = 0; /*Expected in check_ptrace and check_sysemu when they
- succeed in modifying the stack frame*/
+ /*
+ * Expected in check_ptrace and check_sysemu when they succeed
+ * in modifying the stack frame
+ */
+ ret = 0;
else
- ret = 2; /*Serious trouble! This could be caused by a bug in
- host 2.6 SKAS3/2.6 patch before release -V6, together
- with a bug in the UML code itself.*/
+ /* Serious trouble! This could be caused by a bug in host 2.6
+ * SKAS3/2.6 patch before release -V6, together with a bug in
+ * the UML code itself.
+ */
+ ret = 2;
_exit(ret);
}
stack = mmap(NULL, UM_KERN_PAGE_SIZE,
PROT_READ | PROT_WRITE | PROT_EXEC,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- if(stack == MAP_FAILED)
+ if (stack == MAP_FAILED)
fatal_perror("check_ptrace : mmap failed");
+
sp = (unsigned long) stack + UM_KERN_PAGE_SIZE - sizeof(void *);
pid = clone(ptrace_child, (void *) sp, SIGCHLD, NULL);
- if(pid < 0)
+ if (pid < 0)
fatal_perror("start_ptraced_child : clone failed");
+
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
- if(n < 0)
+ if (n < 0)
fatal_perror("check_ptrace : clone failed");
- if(!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP))
+ if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGSTOP))
fatal("check_ptrace : expected SIGSTOP, got status = %d",
status);
{
int status, n, ret = 0;
- if(ptrace(PTRACE_CONT, pid, 0, 0) < 0)
+ if (ptrace(PTRACE_CONT, pid, 0, 0) < 0)
fatal_perror("stop_ptraced_child : ptrace failed");
CATCH_EINTR(n = waitpid(pid, &status, 0));
- if(!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
+ if (!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
int exit_with = WEXITSTATUS(status);
if (exit_with == 2)
non_fatal("check_ptrace : child exited with status 2. "
ret = -1;
}
- if(munmap(stack, UM_KERN_PAGE_SIZE) < 0)
+ if (munmap(stack, UM_KERN_PAGE_SIZE) < 0)
fatal_perror("check_ptrace : munmap failed");
return ret;
}
sysemu_supported = 0;
pid = start_ptraced_child(&stack);
- if(ptrace(PTRACE_SYSEMU, pid, 0, 0) < 0)
+ if (ptrace(PTRACE_SYSEMU, pid, 0, 0) < 0)
goto fail;
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
if (n < 0)
fatal_perror("check_sysemu : wait failed");
- if(!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGTRAP))
+ if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGTRAP))
fatal("check_sysemu : expected SIGTRAP, got status = %d",
status);
- if(ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
+ if (ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
fatal_perror("check_sysemu : PTRACE_GETREGS failed");
- if(PT_SYSCALL_NR(regs) != __NR_getpid){
+ if (PT_SYSCALL_NR(regs) != __NR_getpid) {
non_fatal("check_sysemu got system call number %d, "
"expected %d...", PT_SYSCALL_NR(regs), __NR_getpid);
goto fail;
}
n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET, os_getpid());
- if(n < 0){
+ if (n < 0) {
non_fatal("check_sysemu : failed to modify system call "
"return");
goto fail;
non_fatal("Checking advanced syscall emulation patch for ptrace...");
pid = start_ptraced_child(&stack);
- if((ptrace(PTRACE_OLDSETOPTIONS, pid, 0,
+ if ((ptrace(PTRACE_OLDSETOPTIONS, pid, 0,
(void *) PTRACE_O_TRACESYSGOOD) < 0))
fatal_perror("check_ptrace: PTRACE_OLDSETOPTIONS failed");
- while(1){
+ while (1) {
count++;
- if(ptrace(PTRACE_SYSEMU_SINGLESTEP, pid, 0, 0) < 0)
+ if (ptrace(PTRACE_SYSEMU_SINGLESTEP, pid, 0, 0) < 0)
goto fail;
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
- if(n < 0)
+ if (n < 0)
fatal_perror("check_ptrace : wait failed");
- if(WIFSTOPPED(status) && (WSTOPSIG(status) == (SIGTRAP|0x80))){
+ if (WIFSTOPPED(status) &&
+ (WSTOPSIG(status) == (SIGTRAP|0x80))) {
if (!count)
fatal("check_ptrace : SYSEMU_SINGLESTEP "
"doesn't singlestep");
n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET,
os_getpid());
- if(n < 0)
+ if (n < 0)
fatal_perror("check_sysemu : failed to modify "
"system call return");
break;
}
- else if(WIFSTOPPED(status) && (WSTOPSIG(status) == SIGTRAP))
+ else if (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGTRAP))
count++;
else
fatal("check_ptrace : expected SIGTRAP or "
sysemu_supported = 2;
non_fatal("OK\n");
- if ( !force_sysemu_disabled )
+ if (!force_sysemu_disabled)
set_using_sysemu(sysemu_supported);
return;
non_fatal("Checking that ptrace can change system call numbers...");
pid = start_ptraced_child(&stack);
- if((ptrace(PTRACE_OLDSETOPTIONS, pid, 0,
+ if ((ptrace(PTRACE_OLDSETOPTIONS, pid, 0,
(void *) PTRACE_O_TRACESYSGOOD) < 0))
fatal_perror("check_ptrace: PTRACE_OLDSETOPTIONS failed");
- while(1){
- if(ptrace(PTRACE_SYSCALL, pid, 0, 0) < 0)
+ while (1) {
+ if (ptrace(PTRACE_SYSCALL, pid, 0, 0) < 0)
fatal_perror("check_ptrace : ptrace failed");
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
- if(n < 0)
+ if (n < 0)
fatal_perror("check_ptrace : wait failed");
- if(!WIFSTOPPED(status) ||
+ if (!WIFSTOPPED(status) ||
(WSTOPSIG(status) != (SIGTRAP | 0x80)))
fatal("check_ptrace : expected (SIGTRAP|0x80), "
"got status = %d", status);
syscall = ptrace(PTRACE_PEEKUSR, pid, PT_SYSCALL_NR_OFFSET,
0);
- if(syscall == __NR_getpid){
+ if (syscall == __NR_getpid) {
n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_NR_OFFSET,
__NR_getppid);
- if(n < 0)
+ if (n < 0)
fatal_perror("check_ptrace : failed to modify "
"system call");
break;
struct rlimit lim;
int err = getrlimit(RLIMIT_CORE, &lim);
- if(err){
+ if (err) {
perror("Getting core dump limit");
return;
}
printf("Core dump limits :\n\tsoft - ");
- if(lim.rlim_cur == RLIM_INFINITY)
+ if (lim.rlim_cur == RLIM_INFINITY)
printf("NONE\n");
else printf("%lu\n", lim.rlim_cur);
printf("\thard - ");
- if(lim.rlim_max == RLIM_INFINITY)
+ if (lim.rlim_max == RLIM_INFINITY)
printf("NONE\n");
else printf("%lu\n", lim.rlim_max);
}
n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi);
if (n < 0) {
ptrace_faultinfo = 0;
- if(errno == EIO)
+ if (errno == EIO)
non_fatal("not found\n");
else
perror("not found");
n = ptrace(PTRACE_LDT, pid, 0, (unsigned long) &ldt_op);
if (n < 0) {
- if(errno == EIO)
+ if (errno == EIO)
non_fatal("not found\n");
else {
perror("not found");
ptrace_ldt = 0;
}
else {
- if(ptrace_ldt)
+ if (ptrace_ldt)
non_fatal("found\n");
else
non_fatal("found, but use is disabled\n");
proc_mm = 0;
perror("not found");
}
- else {
- if (!proc_mm)
- non_fatal("found but disabled on command line\n");
- else
- non_fatal("found\n");
- }
+ else if (!proc_mm)
+ non_fatal("found but disabled on command line\n");
+ else non_fatal("found\n");
}
int can_do_skas(void)
check_skas3_ptrace_faultinfo();
check_skas3_ptrace_ldt();
- if(!proc_mm || !ptrace_faultinfo || !ptrace_ldt)
+ if (!proc_mm || !ptrace_faultinfo || !ptrace_ldt)
skas_needs_stub = 1;
return 1;
driver = str;
file = strchr(str,',');
- if(file == NULL){
+ if (file == NULL) {
printf("parse_iomem : failed to parse iomem\n");
goto out;
}
*file = '\0';
file++;
fd = open(file, O_RDWR, 0);
- if(fd < 0){
+ if (fd < 0) {
os_print_error(fd, "parse_iomem - Couldn't open io file");
goto out;
}
- if(fstat64(fd, &buf) < 0){
+ if (fstat64(fd, &buf) < 0) {
perror("parse_iomem - cannot stat_fd file");
goto out_close;
}
new = malloc(sizeof(*new));
- if(new == NULL){
+ if (new == NULL) {
perror("Couldn't allocate iomem_region struct");
goto out_close;
}
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include <stdlib.h>
#include <signal.h>
-#include "kern_util.h"
#include "os.h"
-#include "longjmp.h"
+#include "sysdep/ptrace.h"
/* Initialized from linux_main() */
void (*sig_info[NSIG])(int, struct uml_pt_regs *);
+/*
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Licensed under the GPL
+ */
+
#include <stdio.h>
-#include <unistd.h>
#include <stdlib.h>
-#include <string.h>
+#include <dirent.h>
#include <errno.h>
+#include <fcntl.h>
#include <signal.h>
-#include <dirent.h>
-#include <sys/fcntl.h>
+#include <string.h>
+#include <unistd.h>
#include <sys/stat.h>
-#include <sys/param.h>
#include "init.h"
+#include "kern_constants.h"
#include "os.h"
#include "user.h"
char dir[512] = { '\0' };
int len, err;
- if(*uml_dir == '~'){
+ if (*uml_dir == '~') {
char *home = getenv("HOME");
err = -ENOENT;
- if(home == NULL){
- printk("make_uml_dir : no value in environment for "
- "$HOME\n");
+ if (home == NULL) {
+ printk(UM_KERN_ERR "make_uml_dir : no value in "
+ "environment for $HOME\n");
goto err;
}
strlcpy(dir, home, sizeof(dir));
}
strcpy(uml_dir, dir);
- if((mkdir(uml_dir, 0777) < 0) && (errno != EEXIST)){
+ if ((mkdir(uml_dir, 0777) < 0) && (errno != EEXIST)) {
printf("Failed to mkdir '%s': %s\n", uml_dir, strerror(errno));
err = -errno;
goto err_free;
/*
* Unlinks the files contained in @dir and then removes @dir.
* Doesn't handle directory trees, so it's not like rm -rf, but almost such. We
- * ignore ENOENT errors for anything (they happen, strangely enough - possibly due
- * to races between multiple dying UML threads).
+ * ignore ENOENT errors for anything (they happen, strangely enough - possibly
+ * due to races between multiple dying UML threads).
*/
static int remove_files_and_dir(char *dir)
{
return ret;
}
-/* This says that there isn't already a user of the specified directory even if
+/*
+ * This says that there isn't already a user of the specified directory even if
* there are errors during the checking. This is because if these errors
* happen, the directory is unusable by the pre-existing UML, so we might as
* well take it over. This could happen either by
int dead, fd, p, n, err;
n = snprintf(file, sizeof(file), "%s/pid", dir);
- if(n >= sizeof(file)){
- printk("is_umdir_used - pid filename too long\n");
+ if (n >= sizeof(file)) {
+ printk(UM_KERN_ERR "is_umdir_used - pid filename too long\n");
err = -E2BIG;
goto out;
}
dead = 0;
fd = open(file, O_RDONLY);
- if(fd < 0) {
+ if (fd < 0) {
fd = -errno;
- if(fd != -ENOENT){
- printk("is_umdir_used : couldn't open pid file '%s', "
- "err = %d\n", file, -fd);
+ if (fd != -ENOENT) {
+ printk(UM_KERN_ERR "is_umdir_used : couldn't open pid "
+ "file '%s', err = %d\n", file, -fd);
}
goto out;
}
err = 0;
n = read(fd, pid, sizeof(pid));
- if(n < 0){
- printk("is_umdir_used : couldn't read pid file '%s', "
- "err = %d\n", file, errno);
+ if (n < 0) {
+ printk(UM_KERN_ERR "is_umdir_used : couldn't read pid file "
+ "'%s', err = %d\n", file, errno);
goto out_close;
- } else if(n == 0){
- printk("is_umdir_used : couldn't read pid file '%s', "
- "0-byte read\n", file);
+ } else if (n == 0) {
+ printk(UM_KERN_ERR "is_umdir_used : couldn't read pid file "
+ "'%s', 0-byte read\n", file);
goto out_close;
}
p = strtoul(pid, &end, 0);
- if(end == pid){
- printk("is_umdir_used : couldn't parse pid file '%s', "
- "errno = %d\n", file, errno);
+ if (end == pid) {
+ printk(UM_KERN_ERR "is_umdir_used : couldn't parse pid file "
+ "'%s', errno = %d\n", file, errno);
goto out_close;
}
- if((kill(p, 0) == 0) || (errno != ESRCH)){
- printk("umid \"%s\" is already in use by pid %d\n", umid, p);
+ if ((kill(p, 0) == 0) || (errno != ESRCH)) {
+ printk(UM_KERN_ERR "umid \"%s\" is already in use by pid %d\n",
+ umid, p);
return 1;
}
ret = remove_files_and_dir(dir);
if (ret) {
- printk("is_umdir_used - remove_files_and_dir failed with "
- "err = %d\n", ret);
+ printk(UM_KERN_ERR "is_umdir_used - remove_files_and_dir "
+ "failed with err = %d\n", ret);
}
return ret;
}
char pid[sizeof("nnnnn\0")];
int fd, n;
- if(umid_file_name("pid", file, sizeof(file)))
+ if (umid_file_name("pid", file, sizeof(file)))
return;
fd = open(file, O_RDWR | O_CREAT | O_EXCL, 0644);
- if(fd < 0){
- printk("Open of machine pid file \"%s\" failed: %s\n",
- file, strerror(errno));
+ if (fd < 0) {
+ printk(UM_KERN_ERR "Open of machine pid file \"%s\" failed: "
+ "%s\n", file, strerror(errno));
return;
}
snprintf(pid, sizeof(pid), "%d\n", getpid());
n = write(fd, pid, strlen(pid));
- if(n != strlen(pid))
- printk("Write of pid file failed - err = %d\n", errno);
+ if (n != strlen(pid))
+ printk(UM_KERN_ERR "Write of pid file failed - err = %d\n",
+ errno);
close(fd);
}
int __init set_umid(char *name)
{
- if(strlen(name) > UMID_LEN - 1)
+ if (strlen(name) > UMID_LEN - 1)
return -E2BIG;
strlcpy(umid, name, sizeof(umid));
int fd, err;
char tmp[256];
- if(umid_setup)
+ if (umid_setup)
return 0;
make_uml_dir();
- if(*umid == '\0'){
+ if (*umid == '\0') {
strlcpy(tmp, uml_dir, sizeof(tmp));
strlcat(tmp, "XXXXXX", sizeof(tmp));
fd = mkstemp(tmp);
- if(fd < 0){
- printk("make_umid - mkstemp(%s) failed: %s\n",
- tmp, strerror(errno));
+ if (fd < 0) {
+ printk(UM_KERN_ERR "make_umid - mkstemp(%s) failed: "
+ "%s\n", tmp, strerror(errno));
err = -errno;
goto err;
}
set_umid(&tmp[strlen(uml_dir)]);
- /* There's a nice tiny little race between this unlink and
+ /*
+ * There's a nice tiny little race between this unlink and
* the mkdir below. It'd be nice if there were a mkstemp
* for directories.
*/
- if(unlink(tmp)){
+ if (unlink(tmp)) {
err = -errno;
goto err;
}
snprintf(tmp, sizeof(tmp), "%s%s", uml_dir, umid);
err = mkdir(tmp, 0777);
- if(err < 0){
+ if (err < 0) {
err = -errno;
- if(err != -EEXIST)
+ if (err != -EEXIST)
goto err;
if (umdir_take_if_dead(tmp) < 0)
err = mkdir(tmp, 0777);
}
- if(err){
+ if (err) {
err = -errno;
- printk("Failed to create '%s' - err = %d\n", umid, -errno);
+ printk(UM_KERN_ERR "Failed to create '%s' - err = %d\n", umid,
+ errno);
goto err;
}
static int __init make_umid_init(void)
{
- if(!make_umid())
+ if (!make_umid())
return 0;
- /* If initializing with the given umid failed, then try again with
+ /*
+ * If initializing with the given umid failed, then try again with
* a random one.
*/
- printk("Failed to initialize umid \"%s\", trying with a random umid\n",
- umid);
+ printk(UM_KERN_ERR "Failed to initialize umid \"%s\", trying with a "
+ "random umid\n", umid);
*umid = '\0';
make_umid();
int n, err;
err = make_umid();
- if(err)
+ if (err)
return err;
n = snprintf(buf, len, "%s%s/%s", uml_dir, umid, name);
- if(n >= len){
- printk("umid_file_name : buffer too short\n");
+ if (n >= len) {
+ printk(UM_KERN_ERR "umid_file_name : buffer too short\n");
return -E2BIG;
}
static int __init set_uml_dir(char *name, int *add)
{
- if(*name == '\0'){
+ if (*name == '\0') {
printf("uml_dir can't be an empty string\n");
return 0;
}
- if(name[strlen(name) - 1] == '/'){
+ if (name[strlen(name) - 1] == '/') {
uml_dir = name;
return 0;
}
uml_dir = malloc(strlen(name) + 2);
- if(uml_dir == NULL){
+ if (uml_dir == NULL) {
printf("Failed to malloc uml_dir - error = %d\n", errno);
- /* Return 0 here because do_initcalls doesn't look at
+ /*
+ * Return 0 here because do_initcalls doesn't look at
* the return value.
*/
return 0;
sprintf(dir, "%s%s", uml_dir, umid);
err = remove_files_and_dir(dir);
- if(err)
+ if (err)
printf("remove_umid_dir - remove_files_and_dir failed with "
"err = %d\n", err);
}
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include <unistd.h>
#include <errno.h>
+#include <signal.h>
#include <string.h>
-#include <sys/signal.h>
-#include <asm/ldt.h>
-#include "kern_util.h"
-#include "user.h"
-#include "sysdep/ptrace.h"
-#include "task.h"
+#include "kern_constants.h"
#include "os.h"
+#include "task.h"
+#include "user.h"
#define MAXTOKEN 64
do {
n = os_read_file(fd, ptr, sizeof(*ptr));
c = *ptr++;
- if(n != sizeof(*ptr)){
- if(n == 0)
+ if (n != sizeof(*ptr)) {
+ if (n == 0)
return 0;
- printk("Reading /proc/cpuinfo failed, err = %d\n", -n);
- if(n < 0)
+ printk(UM_KERN_ERR "Reading /proc/cpuinfo failed, "
+ "err = %d\n", -n);
+ if (n < 0)
return n;
else return -EIO;
}
- } while((c != '\n') && (c != stop) && (ptr < end));
+ } while ((c != '\n') && (c != stop) && (ptr < end));
- if(ptr == end){
- printk("Failed to find '%c' in /proc/cpuinfo\n", stop);
+ if (ptr == end) {
+ printk(UM_KERN_ERR "Failed to find '%c' in /proc/cpuinfo\n",
+ stop);
return -1;
}
*(ptr - 1) = '\0';
char c;
scratch[len - 1] = '\0';
- while(1){
+ while (1) {
c = token(fd, scratch, len - 1, ':');
- if(c <= 0)
+ if (c <= 0)
return 0;
- else if(c != ':'){
- printk("Failed to find ':' in /proc/cpuinfo\n");
+ else if (c != ':') {
+ printk(UM_KERN_ERR "Failed to find ':' in "
+ "/proc/cpuinfo\n");
return 0;
}
- if(!strncmp(scratch, key, strlen(key)))
+ if (!strncmp(scratch, key, strlen(key)))
return 1;
do {
n = os_read_file(fd, &c, sizeof(c));
- if(n != sizeof(c)){
- printk("Failed to find newline in "
+ if (n != sizeof(c)) {
+ printk(UM_KERN_ERR "Failed to find newline in "
"/proc/cpuinfo, err = %d\n", -n);
return 0;
}
- } while(c != '\n');
+ } while (c != '\n');
}
return 0;
}
char buf[MAXTOKEN], c;
int fd, len = ARRAY_SIZE(buf);
- printk("Checking for host processor %s support...", feature);
+ printk(UM_KERN_INFO "Checking for host processor %s support...",
+ feature);
fd = os_open_file("/proc/cpuinfo", of_read(OPENFLAGS()), 0);
- if(fd < 0){
- printk("Couldn't open /proc/cpuinfo, err = %d\n", -fd);
+ if (fd < 0) {
+ printk(UM_KERN_ERR "Couldn't open /proc/cpuinfo, err = %d\n",
+ -fd);
return 0;
}
*have_it = 0;
- if(!find_cpuinfo_line(fd, "flags", buf, ARRAY_SIZE(buf)))
+ if (!find_cpuinfo_line(fd, "flags", buf, ARRAY_SIZE(buf)))
goto out;
c = token(fd, buf, len - 1, ' ');
- if(c < 0)
+ if (c < 0)
goto out;
- else if(c != ' '){
- printk("Failed to find ' ' in /proc/cpuinfo\n");
+ else if (c != ' ') {
+ printk(UM_KERN_ERR "Failed to find ' ' in /proc/cpuinfo\n");
goto out;
}
- while(1){
+ while (1) {
c = token(fd, buf, len - 1, ' ');
- if(c < 0)
+ if (c < 0)
goto out;
- else if(c == '\n') break;
+ else if (c == '\n')
+ break;
- if(!strcmp(buf, feature)){
+ if (!strcmp(buf, feature)) {
*have_it = 1;
goto out;
}
}
out:
- if(*have_it == 0)
+ if (*have_it == 0)
printk("No\n");
- else if(*have_it == 1)
+ else if (*have_it == 1)
printk("Yes\n");
os_close_file(fd);
return 1;
}
-#if 0 /* This doesn't work in tt mode, plus it's causing compilation problems
+#if 0 /*
+ * This doesn't work in tt mode, plus it's causing compilation problems
* for some people.
*/
static void disable_lcall(void)
ldt.base_addr = 0;
ldt.limit = 0;
err = modify_ldt(1, &ldt, sizeof(ldt));
- if(err)
- printk("Failed to disable lcall7 - errno = %d\n", errno);
+ if (err)
+ printk(UM_KERN_ERR "Failed to disable lcall7 - errno = %d\n",
+ errno);
}
#endif
{
int have_it;
- if(os_access("/proc/cpuinfo", OS_ACC_R_OK) < 0){
- printk("/proc/cpuinfo not available - skipping CPU capability "
- "checks\n");
+ if (os_access("/proc/cpuinfo", OS_ACC_R_OK) < 0) {
+ printk(UM_KERN_ERR "/proc/cpuinfo not available - skipping CPU "
+ "capability checks\n");
return;
}
- if(check_cpu_flag("cmov", &have_it))
+ if (check_cpu_flag("cmov", &have_it))
host_has_cmov = have_it;
- if(check_cpu_flag("xmm", &have_it))
+ if (check_cpu_flag("xmm", &have_it))
host_has_xmm = have_it;
}
{
unsigned char tmp[2];
- /* This is testing for a cmov (0x0f 0x4x) instruction causing a
+ /*
+ * This is testing for a cmov (0x0f 0x4x) instruction causing a
* SIGILL in init.
*/
- if((sig != SIGILL) || (TASK_PID(get_current()) != 1))
+ if ((sig != SIGILL) || (TASK_PID(get_current()) != 1))
return 0;
if (copy_from_user_proc(tmp, (void *) UPT_IP(regs), 2))
panic("SIGILL in init, could not read instructions!\n");
- if((tmp[0] != 0x0f) || ((tmp[1] & 0xf0) != 0x40))
+ if ((tmp[0] != 0x0f) || ((tmp[1] & 0xf0) != 0x40))
return 0;
- if(host_has_cmov == 0)
+ if (host_has_cmov == 0)
panic("SIGILL caused by cmov, which this processor doesn't "
"implement, boot a filesystem compiled for older "
"processors");
- else if(host_has_cmov == 1)
+ else if (host_has_cmov == 1)
panic("SIGILL caused by cmov, which this processor claims to "
"implement");
- else if(host_has_cmov == -1)
+ else if (host_has_cmov == -1)
panic("SIGILL caused by cmov, couldn't tell if this processor "
"implements it, boot a filesystem compiled for older "
"processors");
/*
- * Copyright (C) 2002 - 2004 Jeff Dike (jdike@addtoit.com)
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
const struct exception_table_entry *fixup;
fixup = search_exception_tables(address);
- if(fixup != 0){
+ if (fixup != 0) {
UPT_IP(regs) = fixup->fixup;
- return(1);
+ return 1;
}
- return(0);
+ return 0;
}
/*
- * Copyright (C) 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include "linux/sched.h"
-#include "linux/slab.h"
-#include "linux/types.h"
-#include "linux/errno.h"
-#include "linux/spinlock.h"
-#include "asm/uaccess.h"
-#include "asm/smp.h"
-#include "asm/ldt.h"
+#include "linux/mm.h"
#include "asm/unistd.h"
-#include "kern.h"
#include "os.h"
-
-extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
-
+#include "proc_mm.h"
#include "skas.h"
#include "skas_ptrace.h"
-#include "asm/mmu_context.h"
-#include "proc_mm.h"
+#include "sysdep/tls.h"
+
+extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc,
void **addr, int done)
{
long res;
- if(proc_mm){
- /* This is a special handling for the case, that the mm to
+ if (proc_mm) {
+ /*
+ * This is a special handling for the case, that the mm to
* modify isn't current->active_mm.
* If this is called directly by modify_ldt,
* (current->active_mm->context.skas.u == mm_idp)
*
* Note: I'm unsure: should interrupts be disabled here?
*/
- if(!current->active_mm || current->active_mm == &init_mm ||
- mm_idp != ¤t->active_mm->context.skas.id)
+ if (!current->active_mm || current->active_mm == &init_mm ||
+ mm_idp != ¤t->active_mm->context.skas.id)
__switch_mm(mm_idp);
}
- if(ptrace_ldt) {
+ if (ptrace_ldt) {
struct ptrace_ldt ldt_op = (struct ptrace_ldt) {
.func = func,
.ptr = desc,
u32 cpu;
int pid;
- if(!proc_mm)
+ if (!proc_mm)
pid = mm_idp->u.pid;
else {
cpu = get_cpu();
res = os_ptrace_ldt(pid, 0, (unsigned long) &ldt_op);
- if(proc_mm)
+ if (proc_mm)
put_cpu();
}
else {
(sizeof(*desc) + sizeof(long) - 1) &
~(sizeof(long) - 1),
addr, &stub_addr);
- if(!res){
+ if (!res) {
unsigned long args[] = { func,
(unsigned long)stub_addr,
sizeof(*desc),
}
}
- if(proc_mm){
- /* This is the second part of special handling, that makes
+ if (proc_mm) {
+ /*
+ * This is the second part of special handling, that makes
* PTRACE_LDT possible to implement.
*/
- if(current->active_mm && current->active_mm != &init_mm &&
- mm_idp != ¤t->active_mm->context.skas.id)
+ if (current->active_mm && current->active_mm != &init_mm &&
+ mm_idp != ¤t->active_mm->context.skas.id)
__switch_mm(¤t->active_mm->context.skas.id);
}
.ptr = kmalloc(bytecount, GFP_KERNEL)};
u32 cpu;
- if(ptrace_ldt.ptr == NULL)
+ if (ptrace_ldt.ptr == NULL)
return -ENOMEM;
- /* This is called from sys_modify_ldt only, so userspace_pid gives
+ /*
+ * This is called from sys_modify_ldt only, so userspace_pid gives
* us the right number
*/
cpu = get_cpu();
res = os_ptrace_ldt(userspace_pid[cpu], 0, (unsigned long) &ptrace_ldt);
put_cpu();
- if(res < 0)
+ if (res < 0)
goto out;
n = copy_to_user(ptr, ptrace_ldt.ptr, res);
- if(n != 0)
+ if (n != 0)
res = -EFAULT;
out:
unsigned long size;
uml_ldt_t * ldt = ¤t->mm->context.skas.ldt;
- if(!ldt->entry_count)
+ if (!ldt->entry_count)
goto out;
- if(bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES)
+ if (bytecount > LDT_ENTRY_SIZE*LDT_ENTRIES)
bytecount = LDT_ENTRY_SIZE*LDT_ENTRIES;
err = bytecount;
- if(ptrace_ldt){
+ if (ptrace_ldt)
return read_ldt_from_host(ptr, bytecount);
- }
down(&ldt->semaphore);
- if(ldt->entry_count <= LDT_DIRECT_ENTRIES){
+ if (ldt->entry_count <= LDT_DIRECT_ENTRIES) {
size = LDT_ENTRY_SIZE*LDT_DIRECT_ENTRIES;
- if(size > bytecount)
+ if (size > bytecount)
size = bytecount;
- if(copy_to_user(ptr, ldt->u.entries, size))
+ if (copy_to_user(ptr, ldt->u.entries, size))
err = -EFAULT;
bytecount -= size;
ptr += size;
}
else {
- for(i=0; i<ldt->entry_count/LDT_ENTRIES_PER_PAGE && bytecount;
- i++){
+ for (i=0; i<ldt->entry_count/LDT_ENTRIES_PER_PAGE && bytecount;
+ i++) {
size = PAGE_SIZE;
- if(size > bytecount)
+ if (size > bytecount)
size = bytecount;
- if(copy_to_user(ptr, ldt->u.pages[i], size)){
+ if (copy_to_user(ptr, ldt->u.pages[i], size)) {
err = -EFAULT;
break;
}
}
up(&ldt->semaphore);
- if(bytecount == 0 || err == -EFAULT)
+ if (bytecount == 0 || err == -EFAULT)
goto out;
- if(clear_user(ptr, bytecount))
+ if (clear_user(ptr, bytecount))
err = -EFAULT;
out:
{
int err;
- if(bytecount > 5*LDT_ENTRY_SIZE)
+ if (bytecount > 5*LDT_ENTRY_SIZE)
bytecount = 5*LDT_ENTRY_SIZE;
err = bytecount;
- /* UML doesn't support lcall7 and lcall27.
+ /*
+ * UML doesn't support lcall7 and lcall27.
* So, we don't really have a default ldt, but emulate
* an empty ldt of common host default ldt size.
*/
- if(clear_user(ptr, bytecount))
+ if (clear_user(ptr, bytecount))
err = -EFAULT;
return err;
void *addr = NULL;
err = -EINVAL;
- if(bytecount != sizeof(ldt_info))
+ if (bytecount != sizeof(ldt_info))
goto out;
err = -EFAULT;
- if(copy_from_user(&ldt_info, ptr, sizeof(ldt_info)))
+ if (copy_from_user(&ldt_info, ptr, sizeof(ldt_info)))
goto out;
err = -EINVAL;
- if(ldt_info.entry_number >= LDT_ENTRIES)
+ if (ldt_info.entry_number >= LDT_ENTRIES)
goto out;
- if(ldt_info.contents == 3){
+ if (ldt_info.contents == 3) {
if (func == 1)
goto out;
if (ldt_info.seg_not_present == 0)
goto out;
}
- if(!ptrace_ldt)
- down(&ldt->semaphore);
+ if (!ptrace_ldt)
+ down(&ldt->semaphore);
err = write_ldt_entry(mm_idp, func, &ldt_info, &addr, 1);
- if(err)
+ if (err)
goto out_unlock;
- else if(ptrace_ldt) {
- /* With PTRACE_LDT available, this is used as a flag only */
- ldt->entry_count = 1;
- goto out;
- }
-
- if(ldt_info.entry_number >= ldt->entry_count &&
- ldt_info.entry_number >= LDT_DIRECT_ENTRIES){
- for(i=ldt->entry_count/LDT_ENTRIES_PER_PAGE;
- i*LDT_ENTRIES_PER_PAGE <= ldt_info.entry_number;
- i++){
- if(i == 0)
+ else if (ptrace_ldt) {
+ /* With PTRACE_LDT available, this is used as a flag only */
+ ldt->entry_count = 1;
+ goto out;
+ }
+
+ if (ldt_info.entry_number >= ldt->entry_count &&
+ ldt_info.entry_number >= LDT_DIRECT_ENTRIES) {
+ for (i=ldt->entry_count/LDT_ENTRIES_PER_PAGE;
+ i*LDT_ENTRIES_PER_PAGE <= ldt_info.entry_number;
+ i++) {
+ if (i == 0)
memcpy(&entry0, ldt->u.entries,
sizeof(entry0));
ldt->u.pages[i] = (struct ldt_entry *)
__get_free_page(GFP_KERNEL|__GFP_ZERO);
- if(!ldt->u.pages[i]){
+ if (!ldt->u.pages[i]) {
err = -ENOMEM;
/* Undo the change in host */
memset(&ldt_info, 0, sizeof(ldt_info));
write_ldt_entry(mm_idp, 1, &ldt_info, &addr, 1);
goto out_unlock;
}
- if(i == 0) {
+ if (i == 0) {
memcpy(ldt->u.pages[0], &entry0,
sizeof(entry0));
memcpy(ldt->u.pages[0]+1, ldt->u.entries+1,
ldt->entry_count = (i + 1) * LDT_ENTRIES_PER_PAGE;
}
}
- if(ldt->entry_count <= ldt_info.entry_number)
+ if (ldt->entry_count <= ldt_info.entry_number)
ldt->entry_count = ldt_info.entry_number + 1;
- if(ldt->entry_count <= LDT_DIRECT_ENTRIES)
+ if (ldt->entry_count <= LDT_DIRECT_ENTRIES)
ldt_p = ldt->u.entries + ldt_info.entry_number;
else
ldt_p = ldt->u.pages[ldt_info.entry_number/LDT_ENTRIES_PER_PAGE] +
ldt_info.entry_number%LDT_ENTRIES_PER_PAGE;
- if(ldt_info.base_addr == 0 && ldt_info.limit == 0 &&
- (func == 1 || LDT_empty(&ldt_info))){
+ if (ldt_info.base_addr == 0 && ldt_info.limit == 0 &&
+ (func == 1 || LDT_empty(&ldt_info))) {
ldt_p->a = 0;
ldt_p->b = 0;
}
spin_lock(&host_ldt_lock);
- if(host_ldt_entries != NULL){
+ if (host_ldt_entries != NULL) {
spin_unlock(&host_ldt_lock);
return;
}
spin_unlock(&host_ldt_lock);
- for(i = LDT_PAGES_MAX-1, order=0; i; i>>=1, order++);
+ for (i = LDT_PAGES_MAX-1, order=0; i; i>>=1, order++)
+ ;
ldt = (struct ldt_entry *)
__get_free_pages(GFP_KERNEL|__GFP_ZERO, order);
- if(ldt == NULL) {
- printk("ldt_get_host_info: couldn't allocate buffer for host "
- "ldt\n");
+ if (ldt == NULL) {
+ printk(KERN_ERR "ldt_get_host_info: couldn't allocate buffer "
+ "for host ldt\n");
return;
}
ret = modify_ldt(0, ldt, (1<<order)*PAGE_SIZE);
- if(ret < 0) {
- printk("ldt_get_host_info: couldn't read host ldt\n");
+ if (ret < 0) {
+ printk(KERN_ERR "ldt_get_host_info: couldn't read host ldt\n");
goto out_free;
}
- if(ret == 0) {
+ if (ret == 0) {
/* default_ldt is active, simply write an empty entry 0 */
host_ldt_entries = dummy_list;
goto out_free;
}
- for(i=0, size=0; i<ret/LDT_ENTRY_SIZE; i++){
- if(ldt[i].a != 0 || ldt[i].b != 0)
+ for (i=0, size=0; i<ret/LDT_ENTRY_SIZE; i++) {
+ if (ldt[i].a != 0 || ldt[i].b != 0)
size++;
}
- if(size < ARRAY_SIZE(dummy_list))
+ if (size < ARRAY_SIZE(dummy_list))
host_ldt_entries = dummy_list;
else {
size = (size + 1) * sizeof(dummy_list[0]);
tmp = kmalloc(size, GFP_KERNEL);
- if(tmp == NULL) {
- printk("ldt_get_host_info: couldn't allocate host ldt "
- "list\n");
+ if (tmp == NULL) {
+ printk(KERN_ERR "ldt_get_host_info: couldn't allocate "
+ "host ldt list\n");
goto out_free;
}
host_ldt_entries = tmp;
}
- for(i=0, k=0; i<ret/LDT_ENTRY_SIZE; i++){
- if(ldt[i].a != 0 || ldt[i].b != 0) {
+ for (i=0, k=0; i<ret/LDT_ENTRY_SIZE; i++) {
+ if (ldt[i].a != 0 || ldt[i].b != 0)
host_ldt_entries[k++] = i;
- }
}
host_ldt_entries[k] = -1;
struct proc_mm_op copy;
- if(!ptrace_ldt)
+ if (!ptrace_ldt)
init_MUTEX(&new_mm->ldt.semaphore);
- if(!from_mm){
+ if (!from_mm) {
memset(&desc, 0, sizeof(desc));
/*
* We have to initialize a clean ldt.
*/
- if(proc_mm) {
+ if (proc_mm) {
/*
* If the new mm was created using proc_mm, host's
* default-ldt currently is assigned, which normally
* To remove these gates, we simply write an empty
* entry as number 0 to the host.
*/
- err = write_ldt_entry(&new_mm->id, 1, &desc,
- &addr, 1);
+ err = write_ldt_entry(&new_mm->id, 1, &desc, &addr, 1);
}
else{
/*
* will be reset in the following loop
*/
ldt_get_host_info();
- for(num_p=host_ldt_entries; *num_p != -1; num_p++){
+ for (num_p=host_ldt_entries; *num_p != -1; num_p++) {
desc.entry_number = *num_p;
err = write_ldt_entry(&new_mm->id, 1, &desc,
&addr, *(num_p + 1) == -1);
- if(err)
+ if (err)
break;
}
}
goto out;
}
- if(proc_mm){
- /* We have a valid from_mm, so we now have to copy the LDT of
+ if (proc_mm) {
+ /*
+ * We have a valid from_mm, so we now have to copy the LDT of
* from_mm to new_mm, because using proc_mm an new mm with
* an empty/default LDT was created in new_mm()
*/
{ .copy_segments =
from_mm->id.u.mm_fd } } );
i = os_write_file(new_mm->id.u.mm_fd, ©, sizeof(copy));
- if(i != sizeof(copy))
- printk("new_mm : /proc/mm copy_segments failed, "
- "err = %d\n", -i);
+ if (i != sizeof(copy))
+ printk(KERN_ERR "new_mm : /proc/mm copy_segments "
+ "failed, err = %d\n", -i);
}
- if(!ptrace_ldt) {
- /* Our local LDT is used to supply the data for
+ if (!ptrace_ldt) {
+ /*
+ * Our local LDT is used to supply the data for
* modify_ldt(READLDT), if PTRACE_LDT isn't available,
* i.e., we have to use the stub for modify_ldt, which
* can't handle the big read buffer of up to 64kB.
*/
down(&from_mm->ldt.semaphore);
- if(from_mm->ldt.entry_count <= LDT_DIRECT_ENTRIES){
+ if (from_mm->ldt.entry_count <= LDT_DIRECT_ENTRIES)
memcpy(new_mm->ldt.u.entries, from_mm->ldt.u.entries,
sizeof(new_mm->ldt.u.entries));
- }
- else{
+ else {
i = from_mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE;
- while(i-->0){
+ while (i-->0) {
page = __get_free_page(GFP_KERNEL|__GFP_ZERO);
- if (!page){
+ if (!page) {
err = -ENOMEM;
break;
}
{
int i;
- if(!ptrace_ldt && mm->ldt.entry_count > LDT_DIRECT_ENTRIES){
+ if (!ptrace_ldt && mm->ldt.entry_count > LDT_DIRECT_ENTRIES) {
i = mm->ldt.entry_count / LDT_ENTRIES_PER_PAGE;
- while(i-- > 0){
- free_page((long )mm->ldt.u.pages[i]);
- }
+ while (i-- > 0)
+ free_page((long) mm->ldt.u.pages[i]);
}
mm->ldt.entry_count = 0;
}
-/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+/*
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include <linux/compiler.h>
-#include "linux/sched.h"
#include "linux/mm.h"
-#include "asm/elf.h"
-#include "asm/ptrace.h"
+#include "linux/sched.h"
#include "asm/uaccess.h"
-#include "asm/unistd.h"
-#include "sysdep/ptrace.h"
-#include "sysdep/sigcontext.h"
-#include "sysdep/sc.h"
extern int arch_switch_tls(struct task_struct *from, struct task_struct *to);
return;
if (err != -EINVAL)
- printk(KERN_WARNING "arch_switch_tls failed, errno %d, not EINVAL\n", -err);
+ printk(KERN_WARNING "arch_switch_tls failed, errno %d, "
+ "not EINVAL\n", -err);
else
printk(KERN_WARNING "arch_switch_tls failed, errno = EINVAL\n");
}
int n;
n = copy_from_user(&instr, (void __user *) addr, sizeof(instr));
- if(n){
+ if (n) {
/* access_process_vm() grants access to vsyscall and stub,
* while copy_from_user doesn't. Maybe access_process_vm is
* slow, but that doesn't matter, since it will be called only
* in case of singlestepping, if copy_from_user failed.
*/
n = access_process_vm(current, addr, &instr, sizeof(instr), 0);
- if(n != sizeof(instr)) {
- printk("is_syscall : failed to read instruction from "
- "0x%lx\n", addr);
- return(1);
+ if (n != sizeof(instr)) {
+ printk(KERN_ERR "is_syscall : failed to read "
+ "instruction from 0x%lx\n", addr);
+ return 1;
}
}
/* int 0x80 or sysenter */
- return((instr == 0x80cd) || (instr == 0x340f));
+ return (instr == 0x80cd) || (instr == 0x340f);
}
/* determines which flags the user has access to. */
int poke_user(struct task_struct *child, long addr, long data)
{
- if ((addr & 3) || addr < 0)
- return -EIO;
-
- if (addr < MAX_REG_OFFSET)
- return putreg(child, addr, data);
-
- else if((addr >= offsetof(struct user, u_debugreg[0])) &&
- (addr <= offsetof(struct user, u_debugreg[7]))){
- addr -= offsetof(struct user, u_debugreg[0]);
- addr = addr >> 2;
- if((addr == 4) || (addr == 5)) return -EIO;
- child->thread.arch.debugregs[addr] = data;
- return 0;
- }
- return -EIO;
+ if ((addr & 3) || addr < 0)
+ return -EIO;
+
+ if (addr < MAX_REG_OFFSET)
+ return putreg(child, addr, data);
+ else if ((addr >= offsetof(struct user, u_debugreg[0])) &&
+ (addr <= offsetof(struct user, u_debugreg[7]))) {
+ addr -= offsetof(struct user, u_debugreg[0]);
+ addr = addr >> 2;
+ if ((addr == 4) || (addr == 5))
+ return -EIO;
+ child->thread.arch.debugregs[addr] = data;
+ return 0;
+ }
+ return -EIO;
}
unsigned long getreg(struct task_struct *child, int regno)
return retval;
}
+/* read the word at location addr in the USER area. */
int peek_user(struct task_struct *child, long addr, long data)
{
-/* read the word at location addr in the USER area. */
unsigned long tmp;
if ((addr & 3) || addr < 0)
return -EIO;
tmp = 0; /* Default return condition */
- if(addr < MAX_REG_OFFSET){
+ if (addr < MAX_REG_OFFSET) {
tmp = getreg(child, addr);
}
- else if((addr >= offsetof(struct user, u_debugreg[0])) &&
- (addr <= offsetof(struct user, u_debugreg[7]))){
+ else if ((addr >= offsetof(struct user, u_debugreg[0])) &&
+ (addr <= offsetof(struct user, u_debugreg[7]))) {
addr -= offsetof(struct user, u_debugreg[0]);
addr = addr >> 2;
tmp = child->thread.arch.debugregs[addr];
static inline unsigned short twd_i387_to_fxsr( unsigned short twd )
{
unsigned int tmp; /* to avoid 16 bit prefixes in the code */
-
+
/* Transform each pair of bits into 01 (valid) or 00 (empty) */
- tmp = ~twd;
- tmp = (tmp | (tmp>>1)) & 0x5555; /* 0V0V0V0V0V0V0V0V */
- /* and move the valid bits to the lower byte. */
- tmp = (tmp | (tmp >> 1)) & 0x3333; /* 00VV00VV00VV00VV */
- tmp = (tmp | (tmp >> 2)) & 0x0f0f; /* 0000VVVV0000VVVV */
- tmp = (tmp | (tmp >> 4)) & 0x00ff; /* 00000000VVVVVVVV */
- return tmp;
+ tmp = ~twd;
+ tmp = (tmp | (tmp>>1)) & 0x5555; /* 0V0V0V0V0V0V0V0V */
+ /* and move the valid bits to the lower byte. */
+ tmp = (tmp | (tmp >> 1)) & 0x3333; /* 00VV00VV00VV00VV */
+ tmp = (tmp | (tmp >> 2)) & 0x0f0f; /* 0000VVVV0000VVVV */
+ tmp = (tmp | (tmp >> 4)) & 0x00ff; /* 00000000VVVVVVVV */
+ return tmp;
}
static inline unsigned long twd_fxsr_to_i387( struct i387_fxsave_struct *fxsave )
return 0;
}
-static inline int convert_fxsr_from_user(struct pt_regs *regs,
+static inline int convert_fxsr_from_user(struct pt_regs *regs,
struct _fpstate __user *buf)
{
return 0;
err = convert_fxsr_to_user((struct _fpstate __user *) buf,
&child->thread.regs);
- if(err) return(-EFAULT);
- else return(0);
+ if (err)
+ return -EFAULT;
+ return 0;
}
int set_fpregs(unsigned long buf, struct task_struct *child)
{
int err;
- err = convert_fxsr_from_user(&child->thread.regs,
+ err = convert_fxsr_from_user(&child->thread.regs,
(struct _fpstate __user *) buf);
- if(err) return(-EFAULT);
- else return(0);
+ if (err)
+ return -EFAULT;
+ return 0;
}
int get_fpxregs(unsigned long buf, struct task_struct *tsk)
fpu->fos = 0;
memcpy(fpu->st_space, (void *) SC_FP_ST(PT_REGS_SC(regs)),
sizeof(fpu->st_space));
- return(1);
+ return 1;
}
#endif
{
return 1;
}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
/*
- * Copyright (C) 2004 Jeff Dike (jdike@addtoit.com)
+ * Copyright (C) 2004 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
-#include "linux/signal.h"
#include "linux/ptrace.h"
-#include "asm/current.h"
-#include "asm/ucontext.h"
-#include "asm/uaccess.h"
#include "asm/unistd.h"
+#include "asm/uaccess.h"
+#include "asm/ucontext.h"
#include "frame_kern.h"
-#include "sigcontext.h"
-#include "registers.h"
#include "skas.h"
void copy_sc(struct uml_pt_regs *regs, void *from)
static int copy_sc_from_user(struct pt_regs *regs,
struct sigcontext __user *from)
{
- struct sigcontext sc;
+ struct sigcontext sc;
unsigned long fpregs[HOST_FP_SIZE];
int err;
err = copy_from_user(&sc, from, sizeof(sc));
err |= copy_from_user(fpregs, sc.fpstate, sizeof(fpregs));
- if(err)
+ if (err)
return err;
copy_sc(®s->regs, &sc);
err = restore_fp_registers(userspace_pid[0], fpregs);
- if(err < 0) {
- printk("copy_sc_from_user_skas - PTRACE_SETFPREGS failed, "
- "errno = %d\n", -err);
+ if (err < 0) {
+ printk(KERN_ERR "copy_sc_from_user_skas - PTRACE_SETFPREGS "
+ "failed, errno = %d\n", -err);
return err;
}
struct _fpstate __user *to_fp, struct pt_regs *regs,
unsigned long sp)
{
- struct sigcontext sc;
+ struct sigcontext sc;
unsigned long fpregs[HOST_FP_SIZE];
struct faultinfo * fi = ¤t->thread.arch.faultinfo;
int err;
sc.eflags = REGS_EFLAGS(regs->regs.regs);
sc.esp_at_signal = regs->regs.regs[UESP];
sc.ss = regs->regs.regs[SS];
- sc.cr2 = fi->cr2;
- sc.err = fi->error_code;
- sc.trapno = fi->trap_no;
+ sc.cr2 = fi->cr2;
+ sc.err = fi->error_code;
+ sc.trapno = fi->trap_no;
err = save_fp_registers(userspace_pid[0], fpregs);
- if(err < 0){
- printk("copy_sc_to_user_skas - PTRACE_GETFPREGS failed, "
- "errno = %d\n", err);
+ if (err < 0) {
+ printk(KERN_ERR "copy_sc_to_user_skas - PTRACE_GETFPREGS "
+ "failed, errno = %d\n", err);
return 1;
}
to_fp = (to_fp ? to_fp : (struct _fpstate __user *) (to + 1));
sc.fpstate = to_fp;
- if(err)
+ if (err)
return err;
return copy_to_user(to, &sc, sizeof(sc)) ||
copy_to_user(to_fp, fpregs, sizeof(fpregs));
}
-static int copy_ucontext_to_user(struct ucontext __user *uc, struct _fpstate __user *fp,
- sigset_t *set, unsigned long sp)
+static int copy_ucontext_to_user(struct ucontext __user *uc,
+ struct _fpstate __user *fp, sigset_t *set,
+ unsigned long sp)
{
int err = 0;
return 1;
restorer = frame->retcode;
- if(ka->sa.sa_flags & SA_RESTORER)
+ if (ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
/* Update SP now because the page fault handler refuses to extend
err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2));
err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
- if(err)
+ if (err)
goto err;
PT_REGS_SP(regs) = (unsigned long) frame;
return 1;
restorer = frame->retcode;
- if(ka->sa.sa_flags & SA_RESTORER)
+ if (ka->sa.sa_flags & SA_RESTORER)
restorer = ka->sa.sa_restorer;
/* See comment above about why this is here */
err |= __put_user(__NR_rt_sigreturn, (int __user *)(frame->retcode+1));
err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
- if(err)
+ if (err)
goto err;
PT_REGS_IP(regs) = (unsigned long) ka->sa.sa_handler;
unsigned long __user *extramask = frame->extramask;
int sig_size = (_NSIG_WORDS - 1) * sizeof(unsigned long);
- if(copy_from_user(&set.sig[0], oldmask, sizeof(set.sig[0])) ||
- copy_from_user(&set.sig[1], extramask, sig_size))
+ if (copy_from_user(&set.sig[0], oldmask, sizeof(set.sig[0])) ||
+ copy_from_user(&set.sig[1], extramask, sig_size))
goto segfault;
sigdelsetmask(&set, ~_BLOCKABLE);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- if(copy_sc_from_user(¤t->thread.regs, sc))
+ if (copy_sc_from_user(¤t->thread.regs, sc))
goto segfault;
/* Avoid ERESTART handling */
long sys_rt_sigreturn(struct pt_regs regs)
{
unsigned long sp = PT_REGS_SP(¤t->thread.regs);
- struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (sp - 4);
+ struct rt_sigframe __user *frame =
+ (struct rt_sigframe __user *) (sp - 4);
sigset_t set;
struct ucontext __user *uc = &frame->uc;
int sig_size = _NSIG_WORDS * sizeof(unsigned long);
- if(copy_from_user(&set, &uc->uc_sigmask, sig_size))
+ if (copy_from_user(&set, &uc->uc_sigmask, sig_size))
goto segfault;
sigdelsetmask(&set, ~_BLOCKABLE);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- if(copy_sc_from_user(¤t->thread.regs, &uc->uc_mcontext))
+ if (copy_sc_from_user(¤t->thread.regs, &uc->uc_mcontext))
goto segfault;
/* Avoid ERESTART handling */
* Licensed under the GPL
*/
-#include "linux/kernel.h"
+#include "linux/percpu.h"
#include "linux/sched.h"
-#include "linux/slab.h"
-#include "linux/types.h"
#include "asm/uaccess.h"
-#include "asm/ptrace.h"
-#include "asm/segment.h"
-#include "asm/smp.h"
-#include "asm/desc.h"
-#include "kern.h"
-#include "kern_util.h"
#include "os.h"
#include "skas.h"
+#include "sysdep/tls.h"
/*
* If needed we can detect when it's uninitialized.
/* Postcondition: LDT_empty(info) returns true. */
memset(info, 0, sizeof(*info));
- /* Check the LDT_empty or the i386 sys_get_thread_area code - we obtain
+ /*
+ * Check the LDT_empty or the i386 sys_get_thread_area code - we obtain
* indeed an empty user_desc.
*/
info->read_exec_only = 1;
int idx;
for (idx = GDT_ENTRY_TLS_MIN; idx < GDT_ENTRY_TLS_MAX; idx++) {
- struct uml_tls_struct* curr = &to->thread.arch.tls_array[idx - GDT_ENTRY_TLS_MIN];
+ struct uml_tls_struct* curr =
+ &to->thread.arch.tls_array[idx - GDT_ENTRY_TLS_MIN];
- /* Actually, now if it wasn't flushed it gets cleared and
- * flushed to the host, which will clear it.*/
+ /*
+ * Actually, now if it wasn't flushed it gets cleared and
+ * flushed to the host, which will clear it.
+ */
if (!curr->present) {
if (!curr->flushed) {
clear_user_desc(&curr->tls);
return ret;
}
-/* Verify if we need to do a flush for the new process, i.e. if there are any
+/*
+ * Verify if we need to do a flush for the new process, i.e. if there are any
* present desc's, only if they haven't been flushed.
*/
static inline int needs_TLS_update(struct task_struct *task)
int ret = 0;
for (i = GDT_ENTRY_TLS_MIN; i < GDT_ENTRY_TLS_MAX; i++) {
- struct uml_tls_struct* curr = &task->thread.arch.tls_array[i - GDT_ENTRY_TLS_MIN];
+ struct uml_tls_struct* curr =
+ &task->thread.arch.tls_array[i - GDT_ENTRY_TLS_MIN];
- /* Can't test curr->present, we may need to clear a descriptor
- * which had a value. */
+ /*
+ * Can't test curr->present, we may need to clear a descriptor
+ * which had a value.
+ */
if (curr->flushed)
continue;
ret = 1;
return ret;
}
-/* On a newly forked process, the TLS descriptors haven't yet been flushed. So
+/*
+ * On a newly forked process, the TLS descriptors haven't yet been flushed. So
* we mark them as such and the first switch_to will do the job.
*/
void clear_flushed_tls(struct task_struct *task)
int i;
for (i = GDT_ENTRY_TLS_MIN; i < GDT_ENTRY_TLS_MAX; i++) {
- struct uml_tls_struct* curr = &task->thread.arch.tls_array[i - GDT_ENTRY_TLS_MIN];
+ struct uml_tls_struct* curr =
+ &task->thread.arch.tls_array[i - GDT_ENTRY_TLS_MIN];
- /* Still correct to do this, if it wasn't present on the host it
- * will remain as flushed as it was. */
+ /*
+ * Still correct to do this, if it wasn't present on the host it
+ * will remain as flushed as it was.
+ */
if (!curr->present)
continue;
}
}
-/* In SKAS0 mode, currently, multiple guest threads sharing the same ->mm have a
+/*
+ * In SKAS0 mode, currently, multiple guest threads sharing the same ->mm have a
* common host process. So this is needed in SKAS0 too.
*
* However, if each thread had a different host process (and this was discussed
* for SMP support) this won't be needed.
*
* And this will not need be used when (and if) we'll add support to the host
- * SKAS patch. */
+ * SKAS patch.
+ */
int arch_switch_tls(struct task_struct *from, struct task_struct *to)
{
if (!host_supports_tls)
return 0;
- /* We have no need whatsoever to switch TLS for kernel threads; beyond
+ /*
+ * We have no need whatsoever to switch TLS for kernel threads; beyond
* that, that would also result in us calling os_set_thread_area with
- * userspace_pid[cpu] == 0, which gives an error. */
+ * userspace_pid[cpu] == 0, which gives an error.
+ */
if (likely(to->mm))
return load_TLS(O_FORCE, to);
*info = t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].tls;
out:
- /* Temporary debugging check, to make sure that things have been
+ /*
+ * Temporary debugging check, to make sure that things have been
* flushed. This could be triggered if load_TLS() failed.
*/
- if (unlikely(task == current && !t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].flushed)) {
+ if (unlikely(task == current &&
+ !t->arch.tls_array[idx - GDT_ENTRY_TLS_MIN].flushed)) {
printk(KERN_ERR "get_tls_entry: task with pid %d got here "
"without flushed TLS.", current->pid);
}
return 0;
clear:
- /* When the TLS entry has not been set, the values read to user in the
+ /*
+ * When the TLS entry has not been set, the values read to user in the
* tls_array are 0 (because it's cleared at boot, see
* arch/i386/kernel/head.S:cpu_gdt_table). Emulate that.
*/
}
-/* XXX: This part is probably common to i386 and x86-64. Don't create a common
- * file for now, do that when implementing x86-64 support.*/
+/*
+ * XXX: This part is probably common to i386 and x86-64. Don't create a common
+ * file for now, do that when implementing x86-64 support.
+ */
static int __init __setup_host_supports_tls(void)
{
check_host_supports_tls(&host_supports_tls, &host_gdt_entry_tls_min);
};
const struct exception_table_entry *search_exception_tables(unsigned long add);
+
int arch_fixup(unsigned long address, struct uml_pt_regs *regs)
{
const struct exception_table_entry *fixup;
fixup = search_exception_tables(address);
- if(fixup != 0){
+ if (fixup != 0) {
UPT_IP(regs) = fixup->fixup;
- return(1);
+ return 1;
}
- return(0);
+ return 0;
}
* Licensed under the GPL
*/
-#include "linux/stddef.h"
-#include "linux/errno.h"
#include "linux/personality.h"
#include "linux/ptrace.h"
-#include "asm/current.h"
+#include "asm/unistd.h"
#include "asm/uaccess.h"
-#include "asm/sigcontext.h"
-#include "asm/ptrace.h"
-#include "asm/arch/ucontext.h"
-#include "sysdep/ptrace.h"
+#include "asm/ucontext.h"
#include "frame_kern.h"
#include "skas.h"
{
struct sigcontext *sc = from;
-#define GETREG(regs, regno, sc, regname) \
- (regs)->regs[(regno) / sizeof(unsigned long)] = (sc)->regname
-
- GETREG(regs, R8, sc, r8);
- GETREG(regs, R9, sc, r9);
- GETREG(regs, R10, sc, r10);
- GETREG(regs, R11, sc, r11);
- GETREG(regs, R12, sc, r12);
- GETREG(regs, R13, sc, r13);
- GETREG(regs, R14, sc, r14);
- GETREG(regs, R15, sc, r15);
- GETREG(regs, RDI, sc, rdi);
- GETREG(regs, RSI, sc, rsi);
- GETREG(regs, RBP, sc, rbp);
- GETREG(regs, RBX, sc, rbx);
- GETREG(regs, RDX, sc, rdx);
- GETREG(regs, RAX, sc, rax);
- GETREG(regs, RCX, sc, rcx);
- GETREG(regs, RSP, sc, rsp);
- GETREG(regs, RIP, sc, rip);
- GETREG(regs, EFLAGS, sc, eflags);
- GETREG(regs, CS, sc, cs);
+#define GETREG(regs, regno, sc, regname) \
+ (regs)->regs[(regno) / sizeof(unsigned long)] = (sc)->regname
+
+ GETREG(regs, R8, sc, r8);
+ GETREG(regs, R9, sc, r9);
+ GETREG(regs, R10, sc, r10);
+ GETREG(regs, R11, sc, r11);
+ GETREG(regs, R12, sc, r12);
+ GETREG(regs, R13, sc, r13);
+ GETREG(regs, R14, sc, r14);
+ GETREG(regs, R15, sc, r15);
+ GETREG(regs, RDI, sc, rdi);
+ GETREG(regs, RSI, sc, rsi);
+ GETREG(regs, RBP, sc, rbp);
+ GETREG(regs, RBX, sc, rbx);
+ GETREG(regs, RDX, sc, rdx);
+ GETREG(regs, RAX, sc, rax);
+ GETREG(regs, RCX, sc, rcx);
+ GETREG(regs, RSP, sc, rsp);
+ GETREG(regs, RIP, sc, rip);
+ GETREG(regs, EFLAGS, sc, eflags);
+ GETREG(regs, CS, sc, cs);
#undef GETREG
}
static int copy_sc_from_user(struct pt_regs *regs,
struct sigcontext __user *from)
{
- int err = 0;
-
-#define GETREG(regs, regno, sc, regname) \
- __get_user((regs)->regs.regs[(regno) / sizeof(unsigned long)], \
- &(sc)->regname)
-
- err |= GETREG(regs, R8, from, r8);
- err |= GETREG(regs, R9, from, r9);
- err |= GETREG(regs, R10, from, r10);
- err |= GETREG(regs, R11, from, r11);
- err |= GETREG(regs, R12, from, r12);
- err |= GETREG(regs, R13, from, r13);
- err |= GETREG(regs, R14, from, r14);
- err |= GETREG(regs, R15, from, r15);
- err |= GETREG(regs, RDI, from, rdi);
- err |= GETREG(regs, RSI, from, rsi);
- err |= GETREG(regs, RBP, from, rbp);
- err |= GETREG(regs, RBX, from, rbx);
- err |= GETREG(regs, RDX, from, rdx);
- err |= GETREG(regs, RAX, from, rax);
- err |= GETREG(regs, RCX, from, rcx);
- err |= GETREG(regs, RSP, from, rsp);
- err |= GETREG(regs, RIP, from, rip);
- err |= GETREG(regs, EFLAGS, from, eflags);
- err |= GETREG(regs, CS, from, cs);
+ int err = 0;
+
+#define GETREG(regs, regno, sc, regname) \
+ __get_user((regs)->regs.regs[(regno) / sizeof(unsigned long)], \
+ &(sc)->regname)
+
+ err |= GETREG(regs, R8, from, r8);
+ err |= GETREG(regs, R9, from, r9);
+ err |= GETREG(regs, R10, from, r10);
+ err |= GETREG(regs, R11, from, r11);
+ err |= GETREG(regs, R12, from, r12);
+ err |= GETREG(regs, R13, from, r13);
+ err |= GETREG(regs, R14, from, r14);
+ err |= GETREG(regs, R15, from, r15);
+ err |= GETREG(regs, RDI, from, rdi);
+ err |= GETREG(regs, RSI, from, rsi);
+ err |= GETREG(regs, RBP, from, rbp);
+ err |= GETREG(regs, RBX, from, rbx);
+ err |= GETREG(regs, RDX, from, rdx);
+ err |= GETREG(regs, RAX, from, rax);
+ err |= GETREG(regs, RCX, from, rcx);
+ err |= GETREG(regs, RSP, from, rsp);
+ err |= GETREG(regs, RIP, from, rip);
+ err |= GETREG(regs, EFLAGS, from, eflags);
+ err |= GETREG(regs, CS, from, cs);
#undef GETREG
- return err;
+ return err;
}
static int copy_sc_to_user(struct sigcontext __user *to,
struct _fpstate __user *to_fp, struct pt_regs *regs,
unsigned long mask, unsigned long sp)
{
- struct faultinfo * fi = ¤t->thread.arch.faultinfo;
+ struct faultinfo * fi = ¤t->thread.arch.faultinfo;
int err = 0;
err |= __put_user(0, &to->gs);
err |= __put_user(0, &to->fs);
-#define PUTREG(regs, regno, sc, regname) \
- __put_user((regs)->regs.regs[(regno) / sizeof(unsigned long)], \
- &(sc)->regname)
+#define PUTREG(regs, regno, sc, regname) \
+ __put_user((regs)->regs.regs[(regno) / sizeof(unsigned long)], \
+ &(sc)->regname)
err |= PUTREG(regs, RDI, to, rdi);
err |= PUTREG(regs, RSI, to, rsi);
err |= PUTREG(regs, RBP, to, rbp);
- /* Must use orignal RSP, which is passed in, rather than what's in
- * the pt_regs, because that's already been updated to point at the
- * signal frame.
- */
+ /* Must use orignal RSP, which is passed in, rather than what's in
+ * the pt_regs, because that's already been updated to point at the
+ * signal frame.
+ */
err |= __put_user(sp, &to->rsp);
err |= PUTREG(regs, RBX, to, rbx);
err |= PUTREG(regs, RDX, to, rdx);
err |= PUTREG(regs, R15, to, r15);
err |= PUTREG(regs, CS, to, cs); /* XXX x86_64 doesn't do this */
- err |= __put_user(fi->cr2, &to->cr2);
- err |= __put_user(fi->error_code, &to->err);
- err |= __put_user(fi->trap_no, &to->trapno);
+ err |= __put_user(fi->cr2, &to->cr2);
+ err |= __put_user(fi->error_code, &to->err);
+ err |= __put_user(fi->trap_no, &to->trapno);
err |= PUTREG(regs, RIP, to, rip);
err |= PUTREG(regs, EFLAGS, to, eflags);
struct rt_sigframe
{
- char __user *pretcode;
- struct ucontext uc;
- struct siginfo info;
+ char __user *pretcode;
+ struct ucontext uc;
+ struct siginfo info;
};
#define round_down(m, n) (((m) / (n)) * (n))
frame = (struct rt_sigframe __user *)
round_down(stack_top - sizeof(struct rt_sigframe), 16);
/* Subtract 128 for a red zone and 8 for proper alignment */
- frame = (struct rt_sigframe __user *) ((unsigned long) frame - 128 - 8);
+ frame = (struct rt_sigframe __user *) ((unsigned long) frame - 128 - 8);
if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
goto out;
struct ucontext __user *uc = &frame->uc;
sigset_t set;
- if(copy_from_user(&set, &uc->uc_sigmask, sizeof(set)))
+ if (copy_from_user(&set, &uc->uc_sigmask, sizeof(set)))
goto segfault;
sigdelsetmask(&set, ~_BLOCKABLE);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- if(copy_sc_from_user(¤t->thread.regs, &uc->uc_mcontext))
+ if (copy_sc_from_user(¤t->thread.regs, &uc->uc_mcontext))
goto segfault;
/* Avoid ERESTART handling */
force_sig(SIGSEGV, current);
return 0;
}
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
/*
+ * Copyright (C) 2003 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Copyright 2003 PathScale, Inc.
*
* Licensed under the GPL
*/
#include "linux/linkage.h"
-#include "linux/slab.h"
-#include "linux/shm.h"
-#include "linux/utsname.h"
#include "linux/personality.h"
-#include "asm/uaccess.h"
-#define __FRAME_OFFSETS
-#include "asm/ptrace.h"
-#include "asm/unistd.h"
+#include "linux/utsname.h"
#include "asm/prctl.h" /* XXX This should get the constants from libc */
-#include "kern.h"
+#include "asm/uaccess.h"
#include "os.h"
asmlinkage long sys_uname64(struct new_utsname __user * name)
{
int err;
+
down_read(&uts_sem);
err = copy_to_user(name, utsname(), sizeof (*name));
up_read(&uts_sem);
+
if (personality(current->personality) == PER_LINUX32)
err |= copy_to_user(&name->machine, "i686", 5);
+
return err ? -EFAULT : 0;
}
long arch_prctl(struct task_struct *task, int code, unsigned long __user *addr)
{
- unsigned long *ptr = addr, tmp;
+ unsigned long *ptr = addr, tmp;
long ret;
int pid = task->mm->context.skas.id.u.pid;
* arch_prctl is run on the host, then the registers are read
* back.
*/
- switch(code){
+ switch (code) {
case ARCH_SET_FS:
case ARCH_SET_GS:
- restore_registers(pid, ¤t->thread.regs.regs);
- break;
- case ARCH_GET_FS:
- case ARCH_GET_GS:
- /*
- * With these two, we read to a local pointer and
- * put_user it to the userspace pointer that we were
- * given. If addr isn't valid (because it hasn't been
- * faulted in or is just bogus), we want put_user to
- * fault it in (or return -EFAULT) instead of having
- * the host return -EFAULT.
- */
- ptr = &tmp;
- }
+ restore_registers(pid, ¤t->thread.regs.regs);
+ break;
+ case ARCH_GET_FS:
+ case ARCH_GET_GS:
+ /*
+ * With these two, we read to a local pointer and
+ * put_user it to the userspace pointer that we were
+ * given. If addr isn't valid (because it hasn't been
+ * faulted in or is just bogus), we want put_user to
+ * fault it in (or return -EFAULT) instead of having
+ * the host return -EFAULT.
+ */
+ ptr = &tmp;
+ }
- ret = os_arch_prctl(pid, code, ptr);
- if(ret)
- return ret;
+ ret = os_arch_prctl(pid, code, ptr);
+ if (ret)
+ return ret;
- switch(code){
+ switch (code) {
case ARCH_SET_FS:
current->thread.arch.fs = (unsigned long) ptr;
save_registers(pid, ¤t->thread.regs.regs);
break;
case ARCH_SET_GS:
- save_registers(pid, ¤t->thread.regs.regs);
+ save_registers(pid, ¤t->thread.regs.regs);
break;
case ARCH_GET_FS:
ret = put_user(tmp, addr);
- break;
+ break;
case ARCH_GET_GS:
ret = put_user(tmp, addr);
- break;
+ break;
}
return ret;
void arch_switch_to(struct task_struct *from, struct task_struct *to)
{
- if((to->thread.arch.fs == 0) || (to->mm == NULL))
- return;
+ if ((to->thread.arch.fs == 0) || (to->mm == NULL))
+ return;
- arch_prctl(to, ARCH_SET_FS, (void __user *) to->thread.arch.fs);
+ arch_prctl(to, ARCH_SET_FS, (void __user *) to->thread.arch.fs);
}
*/
t->thread.arch.fs = t->thread.regs.regs.regs[R8 / sizeof(long)];
- return 0;
+ return 0;
}
/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
extern void destroy_context(struct mm_struct *mm);
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
struct mm_struct;
struct thread_struct {
- /* This flag is set to 1 before calling do_fork (and analyzed in
+ struct task_struct *saved_task;
+ /*
+ * This flag is set to 1 before calling do_fork (and analyzed in
* copy_thread) to mark that we are begin called from userspace (fork /
* vfork / clone), and reset to 0 after. It is left to 0 when called
- * from kernelspace (i.e. kernel_thread() or fork_idle(), as of 2.6.11). */
- struct task_struct *saved_task;
+ * from kernelspace (i.e. kernel_thread() or fork_idle(),
+ * as of 2.6.11).
+ */
int forking;
int nsyscalls;
struct pt_regs regs;
{ \
.forking = 0, \
.nsyscalls = 0, \
- .regs = EMPTY_REGS, \
+ .regs = EMPTY_REGS, \
.fault_addr = NULL, \
.prev_sched = NULL, \
.temp_stack = 0, \
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
#define HOST_AUDIT_ARCH AUDIT_ARCH_I386
#include "linux/compiler.h"
-#include "sysdep/ptrace.h"
#include "asm/ptrace-generic.h"
-#include "asm/host_ldt.h"
+#include "sysdep/ptrace.h"
#define PT_REGS_EAX(r) UPT_EAX(&(r)->regs)
#define PT_REGS_EBX(r) UPT_EBX(&(r)->regs)
#define user_mode(r) UPT_IS_USER(&(r)->regs)
+/*
+ * Forward declaration to avoid including sysdep/tls.h, which causes a
+ * circular include, and compilation failures.
+ */
+struct user_desc;
+
extern int ptrace_get_thread_area(struct task_struct *child, int idx,
struct user_desc __user *user_desc);
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff