be2net: Fix to configure VLAN priority for a VF interface.
authorAjit Khaparde <ajit.khaparde@emulex.com>
Fri, 27 Sep 2013 20:18:46 +0000 (15:18 -0500)
committerDavid S. Miller <davem@davemloft.net>
Fri, 27 Sep 2013 21:11:49 +0000 (17:11 -0400)
Thix fix allows the VLAN priority to be configured for a VF interface
via the "ip link set DEVICE vf NUM" path.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/emulex/benet/be_main.c

index 9c25607e5f585e580495d5ef5b2254a813f6026f..ad593cabeed32a732f10179bc695f6588a9cea7c 100644 (file)
@@ -1212,28 +1212,29 @@ static int be_set_vf_vlan(struct net_device *netdev,
                        int vf, u16 vlan, u8 qos)
 {
        struct be_adapter *adapter = netdev_priv(netdev);
+       struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf];
        int status = 0;
 
        if (!sriov_enabled(adapter))
                return -EPERM;
 
-       if (vf >= adapter->num_vfs || vlan > 4095)
+       if (vf >= adapter->num_vfs || vlan > 4095 || qos > 7)
                return -EINVAL;
 
-       if (vlan) {
-               if (adapter->vf_cfg[vf].vlan_tag != vlan) {
+       if (vlan || qos) {
+               vlan |= qos << VLAN_PRIO_SHIFT;
+               if (vf_cfg->vlan_tag != vlan) {
                        /* If this is new value, program it. Else skip. */
-                       adapter->vf_cfg[vf].vlan_tag = vlan;
-
-                       status = be_cmd_set_hsw_config(adapter, vlan,
-                               vf + 1, adapter->vf_cfg[vf].if_handle, 0);
+                       vf_cfg->vlan_tag = vlan;
+                       status = be_cmd_set_hsw_config(adapter, vlan, vf + 1,
+                                                      vf_cfg->if_handle, 0);
                }
        } else {
                /* Reset Transparent Vlan Tagging. */
-               adapter->vf_cfg[vf].vlan_tag = 0;
-               vlan = adapter->vf_cfg[vf].def_vid;
+               vf_cfg->vlan_tag = 0;
+               vlan = vf_cfg->def_vid;
                status = be_cmd_set_hsw_config(adapter, vlan, vf + 1,
-                       adapter->vf_cfg[vf].if_handle, 0);
+                                              vf_cfg->if_handle, 0);
        }