[SCSI] libsas: add host SMP processing
authorJames Bottomley <James.Bottomley@HansenPartnership.com>
Fri, 28 Dec 2007 22:35:17 +0000 (16:35 -0600)
committerJames Bottomley <James.Bottomley@HansenPartnership.com>
Sat, 12 Jan 2008 00:29:11 +0000 (18:29 -0600)
This adds support for host side SMP processing, via a separate
SMP interpreter file.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
drivers/scsi/libsas/Kconfig
drivers/scsi/libsas/Makefile
drivers/scsi/libsas/sas_expander.c
drivers/scsi/libsas/sas_host_smp.c [new file with mode: 0644]
drivers/scsi/libsas/sas_internal.h
include/scsi/scsi_transport_sas.h

index c01a40d321d43530b02e814b3cd335d7f0b54797..18f33cd54411c7cf2772fc57780d16f1b62be8aa 100644 (file)
@@ -38,6 +38,15 @@ config SCSI_SAS_ATA
                Builds in ATA support into libsas.  Will necessitate
                the loading of libata along with libsas.
 
+config SCSI_SAS_HOST_SMP
+       bool "Support for SMP interpretation for SAS hosts"
+       default y
+       depends on SCSI_SAS_LIBSAS
+       help
+               Allows sas hosts to receive SMP frames.  Selecting this
+               option builds an SMP interpreter into libsas.  Say
+               N here if you want to save the few kb this consumes.
+
 config SCSI_SAS_LIBSAS_DEBUG
        bool "Compile the SAS Domain Transport Attributes in debug mode"
        default y
index fd387b91856edf97c6a84b6106ab6329e4c599ab..60d6e93dd9498bd8045bfcd9cb076a5e45dceb50 100644 (file)
@@ -35,3 +35,4 @@ libsas-y +=  sas_init.o     \
                sas_expander.o \
                sas_scsi_host.o
 libsas-$(CONFIG_SCSI_SAS_ATA) +=       sas_ata.o
+libsas-$(CONFIG_SCSI_SAS_HOST_SMP) +=  sas_host_smp.o
\ No newline at end of file
index 27674fe468f5bb16f45ccdc1de3762140dba89f3..76555b1ddfd57ce4393d6a578f851e239227002b 100644 (file)
@@ -1896,11 +1896,9 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
        }
 
        /* no rphy means no smp target support (ie aic94xx host) */
-       if (!rphy) {
-               printk("%s: can we send a smp request to a host?\n",
-                      __FUNCTION__);
-               return -EINVAL;
-       }
+       if (!rphy)
+               return sas_smp_host_handler(shost, req, rsp);
+
        type = rphy->identify.device_type;
 
        if (type != SAS_EDGE_EXPANDER_DEVICE &&
diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c
new file mode 100644 (file)
index 0000000..16f9312
--- /dev/null
@@ -0,0 +1,274 @@
+/*
+ * Serial Attached SCSI (SAS) Expander discovery and configuration
+ *
+ * Copyright (C) 2007 James E.J. Bottomley
+ *             <James.Bottomley@HansenPartnership.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 only.
+ */
+#include <linux/scatterlist.h>
+#include <linux/blkdev.h>
+
+#include "sas_internal.h"
+
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_sas.h>
+#include "../scsi_sas_internal.h"
+
+static void sas_host_smp_discover(struct sas_ha_struct *sas_ha, u8 *resp_data,
+                                 u8 phy_id)
+{
+       struct sas_phy *phy;
+       struct sas_rphy *rphy;
+
+       if (phy_id >= sas_ha->num_phys) {
+               resp_data[2] = SMP_RESP_NO_PHY;
+               return;
+       }
+       resp_data[2] = SMP_RESP_FUNC_ACC;
+
+       phy = sas_ha->sas_phy[phy_id]->phy;
+       resp_data[9] = phy_id;
+       resp_data[13] = phy->negotiated_linkrate;
+       memcpy(resp_data + 16, sas_ha->sas_addr, SAS_ADDR_SIZE);
+       memcpy(resp_data + 24, sas_ha->sas_phy[phy_id]->attached_sas_addr,
+              SAS_ADDR_SIZE);
+       resp_data[40] = (phy->minimum_linkrate << 4) |
+               phy->minimum_linkrate_hw;
+       resp_data[41] = (phy->maximum_linkrate << 4) |
+               phy->maximum_linkrate_hw;
+
+       if (!sas_ha->sas_phy[phy_id]->port ||
+           !sas_ha->sas_phy[phy_id]->port->port_dev)
+               return;
+
+       rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy;
+       resp_data[12] = rphy->identify.device_type << 4;
+       resp_data[14] = rphy->identify.initiator_port_protocols;
+       resp_data[15] = rphy->identify.target_port_protocols;
+}
+
+static void sas_report_phy_sata(struct sas_ha_struct *sas_ha, u8 *resp_data,
+                               u8 phy_id)
+{
+       struct sas_rphy *rphy;
+       struct dev_to_host_fis *fis;
+       int i;
+
+       if (phy_id >= sas_ha->num_phys) {
+               resp_data[2] = SMP_RESP_NO_PHY;
+               return;
+       }
+
+       resp_data[2] = SMP_RESP_PHY_NO_SATA;
+
+       if (!sas_ha->sas_phy[phy_id]->port)
+               return;
+
+       rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy;
+       fis = (struct dev_to_host_fis *)
+               sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd;
+       if (rphy->identify.target_port_protocols != SAS_PROTOCOL_SATA)
+               return;
+
+       resp_data[2] = SMP_RESP_FUNC_ACC;
+       resp_data[9] = phy_id;
+       memcpy(resp_data + 16, sas_ha->sas_phy[phy_id]->attached_sas_addr,
+              SAS_ADDR_SIZE);
+
+       /* check to see if we have a valid d2h fis */
+       if (fis->fis_type != 0x34)
+               return;
+
+       /* the d2h fis is required by the standard to be in LE format */
+       for (i = 0; i < 20; i += 4) {
+               u8 *dst = resp_data + 24 + i, *src =
+                       &sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd[i];
+               dst[0] = src[3];
+               dst[1] = src[2];
+               dst[2] = src[1];
+               dst[3] = src[0];
+       }
+}
+
+static void sas_phy_control(struct sas_ha_struct *sas_ha, u8 phy_id,
+                           u8 phy_op, enum sas_linkrate min,
+                           enum sas_linkrate max, u8 *resp_data)
+{
+       struct sas_internal *i =
+               to_sas_internal(sas_ha->core.shost->transportt);
+       struct sas_phy_linkrates rates;
+
+       if (phy_id >= sas_ha->num_phys) {
+               resp_data[2] = SMP_RESP_NO_PHY;
+               return;
+       }
+       switch (phy_op) {
+       case PHY_FUNC_NOP:
+       case PHY_FUNC_LINK_RESET:
+       case PHY_FUNC_HARD_RESET:
+       case PHY_FUNC_DISABLE:
+       case PHY_FUNC_CLEAR_ERROR_LOG:
+       case PHY_FUNC_CLEAR_AFFIL:
+       case PHY_FUNC_TX_SATA_PS_SIGNAL:
+               break;
+
+       default:
+               resp_data[2] = SMP_RESP_PHY_UNK_OP;
+               return;
+       }
+
+       rates.minimum_linkrate = min;
+       rates.maximum_linkrate = max;
+
+       if (i->dft->lldd_control_phy(sas_ha->sas_phy[phy_id], phy_op, &rates))
+               resp_data[2] = SMP_RESP_FUNC_FAILED;
+       else
+               resp_data[2] = SMP_RESP_FUNC_ACC;
+}
+
+int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
+                        struct request *rsp)
+{
+       u8 *req_data = NULL, *resp_data = NULL, *buf;
+       struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+       int error = -EINVAL, resp_data_len = rsp->data_len;
+
+       /* eight is the minimum size for request and response frames */
+       if (req->data_len < 8 || rsp->data_len < 8)
+               goto out;
+
+       if (bio_offset(req->bio) + req->data_len > PAGE_SIZE ||
+           bio_offset(rsp->bio) + rsp->data_len > PAGE_SIZE) {
+               shost_printk(KERN_ERR, shost,
+                       "SMP request/response frame crosses page boundary");
+               goto out;
+       }
+
+       req_data = kzalloc(req->data_len, GFP_KERNEL);
+
+       /* make sure frame can always be built ... we copy
+        * back only the requested length */
+       resp_data = kzalloc(max(rsp->data_len, 128U), GFP_KERNEL);
+
+       if (!req_data || !resp_data) {
+               error = -ENOMEM;
+               goto out;
+       }
+
+       local_irq_disable();
+       buf = kmap_atomic(bio_page(req->bio), KM_USER0) + bio_offset(req->bio);
+       memcpy(req_data, buf, req->data_len);
+       kunmap_atomic(buf - bio_offset(req->bio), KM_USER0);
+       local_irq_enable();
+
+       if (req_data[0] != SMP_REQUEST)
+               goto out;
+
+       /* always succeeds ... even if we can't process the request
+        * the result is in the response frame */
+       error = 0;
+
+       /* set up default don't know response */
+       resp_data[0] = SMP_RESPONSE;
+       resp_data[1] = req_data[1];
+       resp_data[2] = SMP_RESP_FUNC_UNK;
+
+       switch (req_data[1]) {
+       case SMP_REPORT_GENERAL:
+               req->data_len -= 8;
+               resp_data_len -= 32;
+               resp_data[2] = SMP_RESP_FUNC_ACC;
+               resp_data[9] = sas_ha->num_phys;
+               break;
+
+       case SMP_REPORT_MANUF_INFO:
+               req->data_len -= 8;
+               resp_data_len -= 64;
+               resp_data[2] = SMP_RESP_FUNC_ACC;
+               memcpy(resp_data + 12, shost->hostt->name,
+                      SAS_EXPANDER_VENDOR_ID_LEN);
+               memcpy(resp_data + 20, "libsas virt phy",
+                      SAS_EXPANDER_PRODUCT_ID_LEN);
+               break;
+
+       case SMP_READ_GPIO_REG:
+               /* FIXME: need GPIO support in the transport class */
+               break;
+
+       case SMP_DISCOVER:
+               req->data_len =- 16;
+               if (req->data_len < 0) {
+                       req->data_len = 0;
+                       error = -EINVAL;
+                       goto out;
+               }
+               resp_data_len -= 56;
+               sas_host_smp_discover(sas_ha, resp_data, req_data[9]);
+               break;
+
+       case SMP_REPORT_PHY_ERR_LOG:
+               /* FIXME: could implement this with additional
+                * libsas callbacks providing the HW supports it */
+               break;
+
+       case SMP_REPORT_PHY_SATA:
+               req->data_len =- 16;
+               if (req->data_len < 0) {
+                       req->data_len = 0;
+                       error = -EINVAL;
+                       goto out;
+               }
+               resp_data_len -= 60;
+               sas_report_phy_sata(sas_ha, resp_data, req_data[9]);
+               break;
+
+       case SMP_REPORT_ROUTE_INFO:
+               /* Can't implement; hosts have no routes */
+               break;
+
+       case SMP_WRITE_GPIO_REG:
+               /* FIXME: need GPIO support in the transport class */
+               break;
+
+       case SMP_CONF_ROUTE_INFO:
+               /* Can't implement; hosts have no routes */
+               break;
+
+       case SMP_PHY_CONTROL:
+               req->data_len =- 44;
+               if (req->data_len < 0) {
+                       req->data_len = 0;
+                       error = -EINVAL;
+                       goto out;
+               }
+               resp_data_len -= 8;
+               sas_phy_control(sas_ha, req_data[9], req_data[10],
+                               req_data[32] >> 4, req_data[33] >> 4,
+                               resp_data);
+               break;
+
+       case SMP_PHY_TEST_FUNCTION:
+               /* FIXME: should this be implemented? */
+               break;
+
+       default:
+               /* probably a 2.0 function */
+               break;
+       }
+
+       local_irq_disable();
+       buf = kmap_atomic(bio_page(rsp->bio), KM_USER0) + bio_offset(rsp->bio);
+       memcpy(buf, resp_data, rsp->data_len);
+       flush_kernel_dcache_page(bio_page(rsp->bio));
+       kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0);
+       local_irq_enable();
+       rsp->data_len = resp_data_len;
+
+ out:
+       kfree(req_data);
+       kfree(resp_data);
+       return error;
+}
index baa0666ffa80d772e13a290655ab5a5204ad274d..b4f9368f116ac2002ac07741fd2f2ddc3b2ef33e 100644 (file)
@@ -80,6 +80,20 @@ struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
 
 void sas_hae_reset(struct work_struct *work);
 
+#ifdef CONFIG_SCSI_SAS_HOST_SMP
+extern int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
+                               struct request *rsp);
+#else
+static inline int sas_smp_host_handler(struct Scsi_Host *shost,
+                                      struct request *req,
+                                      struct request *rsp)
+{
+       shost_printk(KERN_ERR, shost,
+               "Cannot send SMP to a sas host (not enabled in CONFIG)\n");
+       return -EINVAL;
+}
+#endif
+
 static inline void sas_queue_event(int event, spinlock_t *lock,
                                   unsigned long *pending,
                                   struct work_struct *work,
index 007d92904207c9e3f4b66c35fa24fddbc83d8611..09125fa95b93a1d834957e7a66cfed67e77e4278 100644 (file)
@@ -11,10 +11,10 @@ struct sas_rphy;
 struct request;
 
 enum sas_device_type {
-       SAS_PHY_UNUSED,
-       SAS_END_DEVICE,
-       SAS_EDGE_EXPANDER_DEVICE,
-       SAS_FANOUT_EXPANDER_DEVICE,
+       SAS_PHY_UNUSED = 0,
+       SAS_END_DEVICE = 1,
+       SAS_EDGE_EXPANDER_DEVICE = 2,
+       SAS_FANOUT_EXPANDER_DEVICE = 3,
 };
 
 static inline int sas_protocol_ata(enum sas_protocol proto)