ide-mpc8xx: convert to use ide_timing_find_mode()

Also fix (disabled) debugging code while at it.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
index 236f9c38e5198d33614beeb61d22311ae70c733e..33bc699814d7221a57d21af27a947eafce24650c 100644 (file)
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -89,7 +89,7 @@ ide_ioport_desc_t ioport_dsc[MAX_HWIFS] = {
 #endif /* IDE0_BASE_OFFSET */
 };
 
-ide_pio_timings_t ide_pio_clocks[6];
+struct ide_timing ide_pio_clocks[6];
 int hold_time[6] =  {30, 20, 15, 10, 10, 10 };   /* PIO Mode 5 with IORDY (nonstandard) */
 
 /*
@@ -200,30 +200,23 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port)
                /* Compute clock cycles for PIO timings */
                for (i=0; i<6; ++i) {
                        bd_t    *binfo = (bd_t *)__res;
+                       struct ide_timing *t, *n;
 
                        hold_time[i]   =
                                PCMCIA_MK_CLKS (hold_time[i],
                                                binfo->bi_busfreq);
-                       ide_pio_clocks[i].setup_time  =
-                               PCMCIA_MK_CLKS (ide_pio_timings[i].setup_time,
-                                               binfo->bi_busfreq);
-                       ide_pio_clocks[i].active_time =
-                               PCMCIA_MK_CLKS (ide_pio_timings[i].active_time,
-                                               binfo->bi_busfreq);
-                       ide_pio_clocks[i].cycle_time  =
-                               PCMCIA_MK_CLKS (ide_pio_timings[i].cycle_time,
-                                               binfo->bi_busfreq);
+
+                       t = ide_timing_find_mode(XFER_PIO_0 + i);
+                       n = &ide_pio_clocks[i];
+
+                       n->setup  = PCMCIA_MK_CLKS(t->setup,  binfo->bi_busfreq);
+                       n->active = PCMCIA_MK_CLKS(t->active, binfo->bi_busfreq);
+                       n->cycle  = PCMCIA_MK_CLKS(t->cycle,  binfo->bi_busfreq);
 #if 0
                        printk ("PIO mode %d timings: %d/%d/%d => %d/%d/%d\n",
                                i,
-                               ide_pio_clocks[i].setup_time,
-                               ide_pio_clocks[i].active_time,
-                               ide_pio_clocks[i].hold_time,
-                               ide_pio_clocks[i].cycle_time,
-                               ide_pio_timings[i].setup_time,
-                               ide_pio_timings[i].active_time,
-                               ide_pio_timings[i].hold_time,
-                               ide_pio_timings[i].cycle_time);
+                               t->setup, t->active, t->cycle,
+                               n->setup, n->active, n->cycle);
 #endif
                }
        }
@@ -408,8 +401,8 @@ static void m8xx_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
        mask = ~(PCMCIA_SHT(0xFF) | PCMCIA_SST(0xFF) | PCMCIA_SL(0xFF));
 
        timing  = PCMCIA_SHT(hold_time[pio]  )
-               | PCMCIA_SST(ide_pio_clocks[pio].setup_time )
-               | PCMCIA_SL (ide_pio_clocks[pio].active_time)
+               | PCMCIA_SST(ide_pio_clocks[pio].setup)
+               | PCMCIA_SL (ide_pio_clocks[pio].active)
                ;
 
 #if 1