bnx2x: use pcie_get_minimum_link()

Use common code for getting the pcie link speed/width for debug printing.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index a38d04942e7ff2f06f765c14a0776e7e9aaab20f..8fe4bcb2407d999d9693cbd63820ffe8ec0be607 100644 (file)
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -2491,11 +2491,5 @@ enum {
 
 #define NUM_MACS       8
 
-enum bnx2x_pci_bus_speed {
-       BNX2X_PCI_LINK_SPEED_2500 = 2500,
-       BNX2X_PCI_LINK_SPEED_5000 = 5000,
-       BNX2X_PCI_LINK_SPEED_8000 = 8000
-};
-
 void bnx2x_set_local_cmng(struct bnx2x *bp);
 #endif /* bnx2x.h */

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 467689f96016cef42e1120076670ba04f0b2f205..654680d25bffe62fbaf99552c3f2fe475be7de8e 100644 (file)
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12274,28 +12274,6 @@ err_out:
        return rc;
 }
 
-static void bnx2x_get_pcie_width_speed(struct bnx2x *bp, int *width,
-                                      enum bnx2x_pci_bus_speed *speed)
-{
-       u32 link_speed, val = 0;
-
-       pci_read_config_dword(bp->pdev, PCICFG_LINK_CONTROL, &val);
-       *width = (val & PCICFG_LINK_WIDTH) >> PCICFG_LINK_WIDTH_SHIFT;
-
-       link_speed = (val & PCICFG_LINK_SPEED) >> PCICFG_LINK_SPEED_SHIFT;
-
-       switch (link_speed) {
-       case 3:
-               *speed = BNX2X_PCI_LINK_SPEED_8000;
-               break;
-       case 2:
-               *speed = BNX2X_PCI_LINK_SPEED_5000;
-               break;
-       default:
-               *speed = BNX2X_PCI_LINK_SPEED_2500;
-       }
-}
-
 static int bnx2x_check_firmware(struct bnx2x *bp)
 {
        const struct firmware *firmware = bp->firmware;
@@ -12652,8 +12630,8 @@ static int bnx2x_init_one(struct pci_dev *pdev,
 {
        struct net_device *dev = NULL;
        struct bnx2x *bp;
-       int pcie_width;
-       enum bnx2x_pci_bus_speed pcie_speed;
+       enum pcie_link_width pcie_width;
+       enum pci_bus_speed pcie_speed;
        int rc, max_non_def_sbs;
        int rx_count, tx_count, rss_count, doorbell_size;
        int max_cos_est;
@@ -12802,18 +12780,19 @@ static int bnx2x_init_one(struct pci_dev *pdev,
                dev_addr_add(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN);
                rtnl_unlock();
        }
-
-       bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
-       BNX2X_DEV_INFO("got pcie width %d and speed %d\n",
-                      pcie_width, pcie_speed);
-
-       BNX2X_DEV_INFO("%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
+       if (pcie_get_minimum_link(bp->pdev, &pcie_speed, &pcie_width) ||
+           pcie_speed == PCI_SPEED_UNKNOWN ||
+           pcie_width == PCIE_LNK_WIDTH_UNKNOWN)
+               BNX2X_DEV_INFO("Failed to determine PCI Express Bandwidth\n");
+       else
+               BNX2X_DEV_INFO(
+                      "%s (%c%d) PCI-E x%d %s found at mem %lx, IRQ %d, node addr %pM\n",
                       board_info[ent->driver_data].name,
                       (CHIP_REV(bp) >> 12) + 'A', (CHIP_METAL(bp) >> 4),
                       pcie_width,
-                      pcie_speed == BNX2X_PCI_LINK_SPEED_2500 ? "2.5GHz" :
-                      pcie_speed == BNX2X_PCI_LINK_SPEED_5000 ? "5.0GHz" :
-                      pcie_speed == BNX2X_PCI_LINK_SPEED_8000 ? "8.0GHz" :
+                      pcie_speed == PCIE_SPEED_2_5GT ? "2.5GHz" :
+                      pcie_speed == PCIE_SPEED_5_0GT ? "5.0GHz" :
+                      pcie_speed == PCIE_SPEED_8_0GT ? "8.0GHz" :
                       "Unknown",
                       dev->base_addr, bp->pdev->irq, dev->dev_addr);