xhci: Workaround for PME stuck issues in Intel xhci
authorMathias Nyman <mathias.nyman@linux.intel.com>
Fri, 6 Mar 2015 15:23:19 +0000 (17:23 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 6 Mar 2015 17:47:48 +0000 (09:47 -0800)
The xhci in Intel Sunrisepoint and Cherryview platforms need a driver
workaround for a Stuck PME that might either block PME events in suspend,
or create spurious PME events preventing runtime suspend.

Workaround is to clear a internal PME flag, BIT(28) in a vendor specific
PMCTRL register at offset 0x80a4, in both suspend resume callbacks

Without this, xhci connected usb devices might never be able to wake up the
system from suspend, or prevent device from going to suspend (xhci d3)

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/xhci-pci.c
drivers/usb/host/xhci.h

index 7f76c8a12f89db425e19c4f3a2a5200de542dbd7..fd53c9ebd662a5fb4593c99ce5dd7c2552ad83c5 100644 (file)
@@ -37,6 +37,9 @@
 
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI     0x8c31
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI  0x9c31
+#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI            0x22b5
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI                0xa12f
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI       0x9d2f
 
 static const char hcd_name[] = "xhci_hcd";
 
@@ -133,6 +136,12 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
                pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
                xhci->quirks |= XHCI_SPURIOUS_REBOOT;
        }
+       if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+               (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
+                pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
+                pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) {
+               xhci->quirks |= XHCI_PME_STUCK_QUIRK;
+       }
        if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
                        pdev->device == PCI_DEVICE_ID_EJ168) {
                xhci->quirks |= XHCI_RESET_ON_RESUME;
@@ -159,6 +168,21 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
                                "QUIRK: Resetting on resume");
 }
 
+/*
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct xhci_hcd *xhci)
+{
+       u32 val;
+       void __iomem *reg;
+
+       reg = (void __iomem *) xhci->cap_regs + 0x80a4;
+       val = readl(reg);
+       writel(val | BIT(28), reg);
+       readl(reg);
+}
+
 /* called during probe() after chip reset completes */
 static int xhci_pci_setup(struct usb_hcd *hcd)
 {
@@ -283,6 +307,9 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
        if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
                pdev->no_d3cold = true;
 
+       if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+               xhci_pme_quirk(xhci);
+
        return xhci_suspend(xhci, do_wakeup);
 }
 
@@ -313,6 +340,9 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
        if (pdev->vendor == PCI_VENDOR_ID_INTEL)
                usb_enable_intel_xhci_ports(pdev);
 
+       if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
+               xhci_pme_quirk(xhci);
+
        retval = xhci_resume(xhci, hibernated);
        return retval;
 }
index d0663931e5baf9aeea461c46bd2c36249b3c277f..265ab1771d24c887d1ba950f2c77f9ee38144438 100644 (file)
@@ -1566,6 +1566,7 @@ struct xhci_hcd {
 #define XHCI_SPURIOUS_WAKEUP   (1 << 18)
 /* For controllers with a broken beyond repair streams implementation */
 #define XHCI_BROKEN_STREAMS    (1 << 19)
+#define XHCI_PME_STUCK_QUIRK   (1 << 20)
        unsigned int            num_active_eps;
        unsigned int            limit_active_eps;
        /* There are two roothubs to keep track of bus suspend info for */