Configuration Options:
[0] - I/O base address
[1] - convertion rate
- Convertion rate RMS noise Effective Number Of Bits
- 0 3.52kHz 23uV 17
- 1 1.76kHz 3.5uV 20
- 2 880Hz 2uV 21.3
- 3 440Hz 1.4uV 21.8
- 4 220Hz 1uV 22.4
- 5 110Hz 750uV 22.9
- 6 55Hz 510nV 23.4
- 7 27.5Hz 375nV 24
- 8 13.75Hz 250nV 24.4
- 9 6.875Hz 200nV 24.6
- [2] - voltage range
- 0 -1.01V .. +1.01V
- 1 -10.1V .. +10.1V
+ Convertion rate RMS noise Effective Number Of Bits
+ 0 3.52kHz 23uV 17
+ 1 1.76kHz 3.5uV 20
+ 2 880Hz 2uV 21.3
+ 3 440Hz 1.4uV 21.8
+ 4 220Hz 1uV 22.4
+ 5 110Hz 750uV 22.9
+ 6 55Hz 510nV 23.4
+ 7 27.5Hz 375nV 24
+ 8 13.75Hz 250nV 24.4
+ 9 6.875Hz 200nV 24.6
+ [2] - voltage range
+ 0 -1.01V .. +1.01V
+ 1 -10.1V .. +10.1V
*/
#include "../comedidev.h"
#define MPC624_SIZE 16
/* Offsets of different ports */
-#define MPC624_MASTER_CONTROL 0 /* not used */
-#define MPC624_GNMUXCH 1 /* Gain, Mux, Channel of ADC */
-#define MPC624_ADC 2 /* read/write to/from ADC */
-#define MPC624_EE 3 /* read/write to/from serial EEPROM via I2C */
-#define MPC624_LEDS 4 /* write to LEDs */
-#define MPC624_DIO 5 /* read/write to/from digital I/O ports */
-#define MPC624_IRQ_MASK 6 /* IRQ masking enable/disable */
+#define MPC624_MASTER_CONTROL 0 /* not used */
+#define MPC624_GNMUXCH 1 /* Gain, Mux, Channel of ADC */
+#define MPC624_ADC 2 /* read/write to/from ADC */
+#define MPC624_EE 3 /* read/write to/from serial EEPROM via I2C */
+#define MPC624_LEDS 4 /* write to LEDs */
+#define MPC624_DIO 5 /* read/write to/from digital I/O ports */
+#define MPC624_IRQ_MASK 6 /* IRQ masking enable/disable */
/* Register bits' names */
#define MPC624_ADBUSY (1<<5)
* ^ - Effective Number Of Bits
*/
-#define MPC624_SPEED_3_52_kHz (MPC624_OSR4 | MPC624_OSR0)
-#define MPC624_SPEED_1_76_kHz (MPC624_OSR4 | MPC624_OSR1)
-#define MPC624_SPEED_880_Hz (MPC624_OSR4 | MPC624_OSR1 | MPC624_OSR0)
-#define MPC624_SPEED_440_Hz (MPC624_OSR4 | MPC624_OSR2)
-#define MPC624_SPEED_220_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR0)
-#define MPC624_SPEED_110_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR1)
-#define MPC624_SPEED_55_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
-#define MPC624_SPEED_27_5_Hz (MPC624_OSR4 | MPC624_OSR3)
-#define MPC624_SPEED_13_75_Hz (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR0)
-#define MPC624_SPEED_6_875_Hz (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
-/* ---------------------------------------------------------------------------- */
+#define MPC624_SPEED_3_52_kHz (MPC624_OSR4 | MPC624_OSR0)
+#define MPC624_SPEED_1_76_kHz (MPC624_OSR4 | MPC624_OSR1)
+#define MPC624_SPEED_880_Hz (MPC624_OSR4 | MPC624_OSR1 | MPC624_OSR0)
+#define MPC624_SPEED_440_Hz (MPC624_OSR4 | MPC624_OSR2)
+#define MPC624_SPEED_220_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR0)
+#define MPC624_SPEED_110_Hz (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR1)
+#define MPC624_SPEED_55_Hz \
+ (MPC624_OSR4 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
+#define MPC624_SPEED_27_5_Hz (MPC624_OSR4 | MPC624_OSR3)
+#define MPC624_SPEED_13_75_Hz (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR0)
+#define MPC624_SPEED_6_875_Hz \
+ (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
+/* -------------------------------------------------------------------------- */
struct skel_private {
- unsigned long int ulConvertionRate; /* set by mpc624_attach() from driver's parameters */
+ /* set by mpc624_attach() from driver's parameters */
+ unsigned long int ulConvertionRate;
};
#define devpriv ((struct skel_private *)dev->private)
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------------- */
static const struct comedi_lrange range_mpc624_bipolar1 = {
1,
{
}
};
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------------- */
static int mpc624_attach(struct comedi_device *dev,
struct comedi_devconfig *it);
static int mpc624_detach(struct comedi_device *dev);
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------------- */
static struct comedi_driver driver_mpc624 = {
.driver_name = "mpc624",
.module = THIS_MODULE,
.detach = mpc624_detach
};
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------------- */
static int mpc624_ai_rinsn(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_insn *insn,
unsigned int *data);
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------------- */
static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{
struct comedi_subdevice *s;
unsigned long iobase;
iobase = it->options[0];
- printk("comedi%d: mpc624 [0x%04lx, ", dev->minor, iobase);
+ printk(KERN_INFO "comedi%d: mpc624 [0x%04lx, ", dev->minor, iobase);
if (request_region(iobase, MPC624_SIZE, "mpc624") == NULL) {
- printk("I/O port(s) in use\n");
+ printk(KERN_ERR "I/O port(s) in use\n");
return -EIO;
}
switch (it->options[1]) {
case 0:
devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
- printk("3.52 kHz, ");
+ printk(KERN_INFO "3.52 kHz, ");
break;
case 1:
devpriv->ulConvertionRate = MPC624_SPEED_1_76_kHz;
- printk("1.76 kHz, ");
+ printk(KERN_INFO "1.76 kHz, ");
break;
case 2:
devpriv->ulConvertionRate = MPC624_SPEED_880_Hz;
- printk("880 Hz, ");
+ printk(KERN_INFO "880 Hz, ");
break;
case 3:
devpriv->ulConvertionRate = MPC624_SPEED_440_Hz;
- printk("440 Hz, ");
+ printk(KERN_INFO "440 Hz, ");
break;
case 4:
devpriv->ulConvertionRate = MPC624_SPEED_220_Hz;
- printk("220 Hz, ");
+ printk(KERN_INFO "220 Hz, ");
break;
case 5:
devpriv->ulConvertionRate = MPC624_SPEED_110_Hz;
- printk("110 Hz, ");
+ printk(KERN_INFO "110 Hz, ");
break;
case 6:
devpriv->ulConvertionRate = MPC624_SPEED_55_Hz;
- printk("55 Hz, ");
+ printk(KERN_INFO "55 Hz, ");
break;
case 7:
devpriv->ulConvertionRate = MPC624_SPEED_27_5_Hz;
- printk("27.5 Hz, ");
+ printk(KERN_INFO "27.5 Hz, ");
break;
case 8:
devpriv->ulConvertionRate = MPC624_SPEED_13_75_Hz;
- printk("13.75 Hz, ");
+ printk(KERN_INFO "13.75 Hz, ");
break;
case 9:
devpriv->ulConvertionRate = MPC624_SPEED_6_875_Hz;
- printk("6.875 Hz, ");
+ printk(KERN_INFO "6.875 Hz, ");
break;
default:
printk
- ("illegal convertion rate setting! Valid numbers are 0..9. Using 9 => 6.875 Hz, ");
+ (KERN_ERR "illegal convertion rate setting!"
+ " Valid numbers are 0..9. Using 9 => 6.875 Hz, ");
devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
}
switch (it->options[1]) {
default:
s->maxdata = 0x3FFFFFFF;
- printk("30 bit, ");
+ printk(KERN_INFO "30 bit, ");
}
switch (it->options[1]) {
case 0:
s->range_table = &range_mpc624_bipolar1;
- printk("1.01V]: ");
+ printk(KERN_INFO "1.01V]: ");
break;
default:
s->range_table = &range_mpc624_bipolar10;
- printk("10.1V]: ");
+ printk(KERN_INFO "10.1V]: ");
}
s->len_chanlist = 1;
s->insn_read = mpc624_ai_rinsn;
- printk("attached\n");
+ printk(KERN_INFO "attached\n");
return 1;
}
static int mpc624_detach(struct comedi_device *dev)
{
- printk("comedi%d: mpc624: remove\n", dev->minor);
+ printk(KERN_INFO "comedi%d: mpc624: remove\n", dev->minor);
if (dev->iobase)
release_region(dev->iobase, MPC624_SIZE);
unsigned long int data_in, data_out;
unsigned char ucPort;
- /* WARNING: We always write 0 to GNSWA bit, so the channel range is +-/10.1Vdc */
+ /*
+ * WARNING:
+ * We always write 0 to GNSWA bit, so the channel range is +-/10.1Vdc
+ */
outb(insn->chanspec, dev->iobase + MPC624_GNMUXCH);
-/* printk("Channel %d: \n", insn->chanspec); */
+/* printk("Channel %d:\n", insn->chanspec); */
if (!insn->n) {
- printk("MPC624: Warning, no data to acquire\n");
+ printk(KERN_INFO "MPC624: Warning, no data to acquire\n");
return 0;
}
break;
}
if (i == TIMEOUT) {
- printk("MPC624: timeout (%dms)\n", TIMEOUT);
+ printk(KERN_ERR "MPC624: timeout (%dms)\n", TIMEOUT);
data[n] = 0;
return -ETIMEDOUT;
}
outb(0, dev->iobase + MPC624_ADC);
udelay(1);
- if (data_out & (1 << 31)) { /* the next bit is a 1 */
+ if (data_out & (1 << 31)) { /* the next bit is a 1 */
/* Set the ADSDI line (send to MPC624) */
outb(MPC624_ADSDI, dev->iobase + MPC624_ADC);
udelay(1);
data_out <<= 1;
}
- /* Received 32-bit long value consist of: */
- /* 31: EOC (End Of Transmission) bit - should be 0 */
- /* 30: DMY (Dummy) bit - should be 0 */
- /* 29: SIG (Sign) bit - 1 if the voltage is positive, 0 if negative */
- /* 28: MSB (Most Significant Bit) - the first bit of convertion result */
- /* .... */
- /* 05: LSB (Least Significant Bit) - the last bit of convertion result */
- /* 04: sub-LSB - sub-LSBs are basically noise, but when */
- /* 03: sub-LSB averaged properly, they can increase convertion */
- /* 02: sub-LSB precision up to 29 bits; they can be discarded */
- /* 01: sub-LSB without loss of resolution. */
- /* 00: sub-LSB */
+ /*
+ * Received 32-bit long value consist of:
+ * 31: EOC -
+ * (End Of Transmission) bit - should be 0
+ * 30: DMY
+ * (Dummy) bit - should be 0
+ * 29: SIG
+ * (Sign) bit- 1 if the voltage is positive,
+ * 0 if negative
+ * 28: MSB
+ * (Most Significant Bit) - the first bit of
+ * the conversion result
+ * ....
+ * 05: LSB
+ * (Least Significant Bit)- the last bit of the
+ * conversion result
+ * 04-00: sub-LSB
+ * - sub-LSBs are basically noise, but when
+ * averaged properly, they can increase conversion
+ * precision up to 29 bits; they can be discarded
+ * without loss of resolution.
+ */
if (data_in & MPC624_EOC_BIT)
- printk("MPC624: EOC bit is set (data_in=%lu)!",
+ printk(KERN_INFO "MPC624:EOC bit is set (data_in=%lu)!",
data_in);
if (data_in & MPC624_DMY_BIT)
- printk("MPC624: DMY bit is set (data_in=%lu)!",
+ printk(KERN_INFO "MPC624:DMY bit is set (data_in=%lu)!",
data_in);
- if (data_in & MPC624_SGN_BIT) { /* check the sign bit *//* The voltage is positive */
- data_in &= 0x3FFFFFFF; /* EOC and DMY should be 0, but we will mask them out just to be sure */
- data[n] = data_in; /* comedi operates on unsigned numbers, so we don't clear the SGN bit */
- /* SGN bit is still set! It's correct, since we're converting to unsigned. */
- } else { /* The voltage is negative */
- /* data_in contains a number in 30-bit two's complement code and we must deal with it */
+ if (data_in & MPC624_SGN_BIT) { /* Volatge is positive */
+ /*
+ * comedi operates on unsigned numbers, so mask off EOC
+ * and DMY and don't clear the SGN bit
+ */
+ data_in &= 0x3FFFFFFF;
+ data[n] = data_in;
+ } else { /* The voltage is negative */
+ /*
+ * data_in contains a number in 30-bit two's complement
+ * code and we must deal with it
+ */
data_in |= MPC624_SGN_BIT;
data_in = ~data_in;
data_in += 1;
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / commitdiff