tty/serial: change of_serial to use new of_property_read_u32() api
authorGrant Likely <grant.likely@secretlab.ca>
Thu, 30 Jun 2011 18:39:12 +0000 (12:39 -0600)
committerGrant Likely <grant.likely@secretlab.ca>
Mon, 4 Jul 2011 06:44:09 +0000 (00:44 -0600)
Simplifies the code a bit and drops a few lines.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Arnd Bergmann <arnd@arndb.de>
drivers/tty/serial/of_serial.c

index 36038ed8f09af8b382772dbfb5cbe957d10bbd2a..dbfbfda275379a6c40de6dd5d18f2d75841fbaea 100644 (file)
@@ -32,17 +32,17 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
 {
        struct resource resource;
        struct device_node *np = ofdev->dev.of_node;
-       const __be32 *clk, *spd;
-       const __be32 *prop;
-       int ret, prop_size;
+       u32 clk, spd, prop;
+       int ret;
 
        memset(port, 0, sizeof *port);
-       spd = of_get_property(np, "current-speed", NULL);
-       clk = of_get_property(np, "clock-frequency", NULL);
-       if (!clk) {
+       if (of_property_read_u32(np, "clock-frequency", &clk)) {
                dev_warn(&ofdev->dev, "no clock-frequency property set\n");
                return -ENODEV;
        }
+       /* If current-speed was set, then try not to change it. */
+       if (of_property_read_u32(np, "current-speed", &spd) == 0)
+               port->custom_divisor = clk / (16 * spd);
 
        ret = of_address_to_resource(np, 0, &resource);
        if (ret) {
@@ -54,20 +54,17 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
        port->mapbase = resource.start;
 
        /* Check for shifted address mapping */
-       prop = of_get_property(np, "reg-offset", &prop_size);
-       if (prop && (prop_size == sizeof(u32)))
-               port->mapbase += be32_to_cpup(prop);
+       if (of_property_read_u32(np, "reg-offset", &prop) == 0)
+               port->mapbase += prop;
 
        /* Check for registers offset within the devices address range */
-       prop = of_get_property(np, "reg-shift", &prop_size);
-       if (prop && (prop_size == sizeof(u32)))
-               port->regshift = be32_to_cpup(prop);
+       if (of_property_read_u32(np, "reg-shift", &prop) == 0)
+               port->regshift = prop;
 
        port->irq = irq_of_parse_and_map(np, 0);
        port->iotype = UPIO_MEM;
-       prop = of_get_property(np, "reg-io-width", &prop_size);
-       if (prop && (prop_size == sizeof(u32))) {
-               switch (be32_to_cpup(prop)) {
+       if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
+               switch (prop) {
                case 1:
                        port->iotype = UPIO_MEM;
                        break;
@@ -75,21 +72,17 @@ static int __devinit of_platform_serial_setup(struct platform_device *ofdev,
                        port->iotype = UPIO_MEM32;
                        break;
                default:
-                       dev_warn(&ofdev->dev,
-                                "unsupported io width (%d bytes)\n",
-                                be32_to_cpup(prop));
+                       dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
+                                prop);
                        return -EINVAL;
                }
        }
 
        port->type = type;
-       port->uartclk = be32_to_cpup(clk);
+       port->uartclk = clk;
        port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
                | UPF_FIXED_PORT | UPF_FIXED_TYPE;
        port->dev = &ofdev->dev;
-       /* If current-speed was set, then try not to change it. */
-       if (spd)
-               port->custom_divisor = be32_to_cpup(clk) / (16 * (be32_to_cpup(spd)));
 
        return 0;
 }