staging: et131x: Remove struct mi_regs from et1310_phy.h

This structure is no longer used, and references registers defined in mii.h and other parts of et1310_phy.h

Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/et131x/et1310_phy.h b/drivers/staging/et131x/et1310_phy.h
index 104008ea053642e4811dfc10ef59d2b1887ec36e..82037ac7d93d86dcb16a3ffcefbf5b4e23355487 100644 (file)
--- a/drivers/staging/et131x/et1310_phy.h
+++ b/drivers/staging/et131x/et1310_phy.h
@@ -61,6 +61,11 @@
 
 #include "et1310_address_map.h"
 
+/*
+ * Defines for generic MII registers 0x00 -> 0x0F can be found in
+ * include/linux/mii.h
+ */
+
 /* some defines for modem registers that seem to be 'reserved' */
 #define PHY_INDEX_REG              0x10
 #define PHY_DATA_REG               0x11
@@ -80,35 +85,6 @@
                                        /* TRU_VMI_LINK_CONTROL_REG       29 */
                                        /* TRU_VMI_TIMING_CONTROL_REG        */
 
-/* PHY Register Mapping(MI) Management Interface Regs */
-struct mi_regs {
-       u8 bmcr;        /* Basic mode control reg(Reg 0x00) */
-       u8 bmsr;        /* Basic mode status reg(Reg 0x01) */
-       u8 idr1;        /* Phy identifier reg 1(Reg 0x02) */
-       u8 idr2;        /* Phy identifier reg 2(Reg 0x03) */
-       u8 anar;        /* Auto-Negotiation advertisement(Reg 0x04) */
-       u8 anlpar;      /* Auto-Negotiation link Partner Ability(Reg 0x05) */
-       u8 aner;        /* Auto-Negotiation expansion reg(Reg 0x06) */
-       u8 annptr;      /* Auto-Negotiation next page transmit reg(Reg 0x07) */
-       u8 lpnpr;       /* link partner next page reg(Reg 0x08) */
-       u8 gcr;         /* Gigabit basic mode control reg(Reg 0x09) */
-       u8 gsr;         /* Gigabit basic mode status reg(Reg 0x0A) */
-       u8 mi_res1[4];  /* Future use by MI working group(Reg 0x0B - 0x0E) */
-       u8 esr;         /* Extended status reg(Reg 0x0F) */
-       u8 mi_res2[3];  /* Future use by MI working group(Reg 0x10 - 0x12) */
-       u8 loop_ctl;    /* Loopback Control Reg(Reg 0x13) */
-       u8 mi_res3;     /* Future use by MI working group(Reg 0x14) */
-       u8 mcr;         /* MI Control Reg(Reg 0x15) */
-       u8 pcr;         /* Configuration Reg(Reg 0x16) */
-       u8 phy_ctl;     /* PHY Control Reg(Reg 0x17) */
-       u8 imr;         /* Interrupt Mask Reg(Reg 0x18) */
-       u8 isr;         /* Interrupt Status Reg(Reg 0x19) */
-       u8 psr;         /* PHY Status Reg(Reg 0x1A) */
-       u8 lcr1;        /* LED Control 1 Reg(Reg 0x1B) */
-       u8 lcr2;        /* LED Control 2 Reg(Reg 0x1C) */
-       u8 mi_res4[3];  /* Future use by MI working group(Reg 0x1D - 0x1F) */
-};
-
 /* MI Register 10: Gigabit basic mode status reg(Reg 0x0A) */
 #define ET_1000BT_MSTR_SLV 0x4000